From: "Gary Lin" <glin@suse.com>
To: devel@edk2.groups.io
Cc: Jordan Justen <jordan.l.justen@intel.com>,
Laszlo Ersek <lersek@redhat.com>,
Ard Biesheuvel <ard.biesheuvel@arm.com>
Subject: [PATCH v2 05/12] OvmfPkg/LsiScsiDxe: Install stubbed EXT_SCSI_PASS_THRU
Date: Thu, 16 Jul 2020 15:46:00 +0800 [thread overview]
Message-ID: <20200716074607.18048-6-glin@suse.com> (raw)
In-Reply-To: <20200716074607.18048-1-glin@suse.com>
Partially implement LsiScsiControllerStart() and LsiScsiControllerStop()
to insert the scaffolding of EXT_SCSI_PASS_THRU functions.
v2: Remove the closing of PciIo protocol from LsiScsiControllerStop().
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
---
OvmfPkg/LsiScsiDxe/LsiScsi.c | 164 +++++++++++++++++++++++++++++-
OvmfPkg/LsiScsiDxe/LsiScsi.h | 77 ++++++++++++++
OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf | 3 +
3 files changed, 243 insertions(+), 1 deletion(-)
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.c b/OvmfPkg/LsiScsiDxe/LsiScsi.c
index 5bca85bd75eb..67fadb411e85 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.c
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.c
@@ -11,14 +11,105 @@
#include <IndustryStandard/LsiScsi.h>
#include <IndustryStandard/Pci.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Protocol/PciIo.h>
#include <Protocol/PciRootBridgeIo.h>
+#include <Protocol/ScsiPassThruExt.h>
#include <Uefi/UefiSpec.h>
#include "LsiScsi.h"
+//
+// The next seven functions implement EFI_EXT_SCSI_PASS_THRU_PROTOCOL
+// for the LSI 53C895A SCSI Controller. Refer to UEFI Spec 2.3.1 + Errata C,
+// sections
+// - 14.1 SCSI Driver Model Overview,
+// - 14.7 Extended SCSI Pass Thru Protocol.
+//
+
+EFI_STATUS
+EFIAPI
+LsiScsiPassThru (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+EFI_STATUS
+EFIAPI
+LsiScsiGetNextTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **TargetPointer,
+ IN OUT UINT64 *Lun
+ )
+{
+ return EFI_NOT_FOUND;
+}
+
+EFI_STATUS
+EFIAPI
+LsiScsiBuildDevicePath (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ )
+{
+ return EFI_NOT_FOUND;
+}
+
+EFI_STATUS
+EFIAPI
+LsiScsiGetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT8 **TargetPointer,
+ OUT UINT64 *Lun
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+EFI_STATUS
+EFIAPI
+LsiScsiResetChannel (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+EFI_STATUS
+EFIAPI
+LsiScsiResetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+EFI_STATUS
+EFIAPI
+LsiScsiGetNextTarget (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **TargetPointer
+ )
+{
+ return EFI_NOT_FOUND;
+}
+
//
// Probe, start and stop functions of this driver, called by the DXE core for
// specific devices.
@@ -88,7 +179,49 @@ LsiScsiControllerStart (
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
)
{
+ EFI_STATUS Status;
+ LSI_SCSI_DEV *Dev;
+
+ Dev = AllocateZeroPool (sizeof (*Dev));
+ if (Dev == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Dev->Signature = LSI_SCSI_DEV_SIGNATURE;
+
+ //
+ // Host adapter channel, doesn't exist
+ //
+ Dev->PassThruMode.AdapterId = MAX_UINT32;
+ Dev->PassThruMode.Attributes =
+ EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL |
+ EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL;
+
+ Dev->PassThru.Mode = &Dev->PassThruMode;
+ Dev->PassThru.PassThru = &LsiScsiPassThru;
+ Dev->PassThru.GetNextTargetLun = &LsiScsiGetNextTargetLun;
+ Dev->PassThru.BuildDevicePath = &LsiScsiBuildDevicePath;
+ Dev->PassThru.GetTargetLun = &LsiScsiGetTargetLun;
+ Dev->PassThru.ResetChannel = &LsiScsiResetChannel;
+ Dev->PassThru.ResetTargetLun = &LsiScsiResetTargetLun;
+ Dev->PassThru.GetNextTarget = &LsiScsiGetNextTarget;
+
+ Status = gBS->InstallProtocolInterface (
+ &ControllerHandle,
+ &gEfiExtScsiPassThruProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &Dev->PassThru
+ );
+ if (EFI_ERROR (Status)) {
+ goto FreePool;
+ }
+
return EFI_SUCCESS;
+
+FreePool:
+ FreePool (Dev);
+
+ return Status;
}
EFI_STATUS
@@ -100,7 +233,36 @@ LsiScsiControllerStop (
IN EFI_HANDLE *ChildHandleBuffer
)
{
- return EFI_SUCCESS;
+ EFI_STATUS Status;
+ EFI_EXT_SCSI_PASS_THRU_PROTOCOL *PassThru;
+ LSI_SCSI_DEV *Dev;
+
+ Status = gBS->OpenProtocol (
+ ControllerHandle,
+ &gEfiExtScsiPassThruProtocolGuid,
+ (VOID **)&PassThru,
+ This->DriverBindingHandle,
+ ControllerHandle,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL // Lookup only
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Dev = LSI_SCSI_FROM_PASS_THRU (PassThru);
+
+ Status = gBS->UninstallProtocolInterface (
+ ControllerHandle,
+ &gEfiExtScsiPassThruProtocolGuid,
+ &Dev->PassThru
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ FreePool (Dev);
+
+ return Status;
}
//
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.h b/OvmfPkg/LsiScsiDxe/LsiScsi.h
index 6c8dcbd70a0a..c194dfbf3347 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.h
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.h
@@ -12,6 +12,17 @@
#ifndef _LSI_SCSI_DXE_H_
#define _LSI_SCSI_DXE_H_
+typedef struct {
+ UINT32 Signature;
+ EFI_EXT_SCSI_PASS_THRU_MODE PassThruMode;
+ EFI_EXT_SCSI_PASS_THRU_PROTOCOL PassThru;
+} LSI_SCSI_DEV;
+
+#define LSI_SCSI_DEV_SIGNATURE SIGNATURE_32 ('L','S','I','S')
+
+#define LSI_SCSI_FROM_PASS_THRU(PassThruPtr) \
+ CR (PassThruPtr, LSI_SCSI_DEV, PassThru, LSI_SCSI_DEV_SIGNATURE)
+
//
// Probe, start and stop functions of this driver, called by the DXE core for
// specific devices.
@@ -47,6 +58,72 @@ LsiScsiControllerStop (
);
+//
+// The next seven functions implement EFI_EXT_SCSI_PASS_THRU_PROTOCOL
+// for the LSI 53C895A SCSI Controller. Refer to UEFI Spec 2.3.1 + Errata C,
+// sections
+// - 14.1 SCSI Driver Model Overview,
+// - 14.7 Extended SCSI Pass Thru Protocol.
+//
+
+EFI_STATUS
+EFIAPI
+LsiScsiPassThru (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ );
+
+EFI_STATUS
+EFIAPI
+LsiScsiGetNextTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **TargetPointer,
+ IN OUT UINT64 *Lun
+ );
+
+EFI_STATUS
+EFIAPI
+LsiScsiBuildDevicePath (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ );
+
+EFI_STATUS
+EFIAPI
+LsiScsiGetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT8 **TargetPointer,
+ OUT UINT64 *Lun
+ );
+
+EFI_STATUS
+EFIAPI
+LsiScsiResetChannel (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
+ );
+
+EFI_STATUS
+EFIAPI
+LsiScsiResetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun
+ );
+
+EFI_STATUS
+EFIAPI
+LsiScsiGetNextTarget (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **TargetPointer
+ );
+
+
//
// The purpose of the following scaffolding (EFI_COMPONENT_NAME_PROTOCOL and
// EFI_COMPONENT_NAME2_PROTOCOL implementation) is to format the driver's name
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf b/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf
index 7ce11fcc6a03..14f9c68308cc 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf
+++ b/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf
@@ -26,9 +26,12 @@ [Packages]
[LibraryClasses]
BaseLib
+ BaseMemoryLib
+ MemoryAllocationLib
UefiBootServicesTableLib
UefiDriverEntryPoint
UefiLib
[Protocols]
+ gEfiExtScsiPassThruProtocolGuid ## BY_START
gEfiPciIoProtocolGuid ## TO_START
--
2.25.1
next prev parent reply other threads:[~2020-07-16 7:46 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-16 7:45 [PATCH v2 00/12] Introduce LsiScsi driver to OvmfPkg Gary Lin
2020-07-16 7:45 ` [PATCH v2 01/12] OvmfPkg/LsiScsiDxe: Create the empty driver Gary Lin
2020-07-16 7:45 ` [PATCH v2 02/12] OvmfPkg/LsiScsiDxe: Install the skeleton of driver binding Gary Lin
2020-07-16 7:45 ` [PATCH v2 03/12] OvmfPkg/LsiScsiDxe: Report the name of the driver Gary Lin
2020-07-16 7:45 ` [PATCH v2 04/12] OvmfPkg/LsiScsiDxe: Probe PCI devices and look for LsiScsi Gary Lin
2020-07-16 7:46 ` Gary Lin [this message]
2020-07-16 7:46 ` [PATCH v2 06/12] OvmfPkg/LsiScsiDxe: Report Targets and LUNs Gary Lin
2020-07-16 15:04 ` Laszlo Ersek
2020-07-16 16:19 ` Laszlo Ersek
2020-07-16 7:46 ` [PATCH v2 07/12] OvmfPkg/LsiScsiDxe: Open PciIo protocol and initialize the device Gary Lin
2020-07-16 16:07 ` Laszlo Ersek
2020-07-16 7:46 ` [PATCH v2 08/12] OvmfPkg/LsiScsiDxe: Map DMA buffer Gary Lin
2020-07-16 16:11 ` Laszlo Ersek
2020-07-16 7:46 ` [PATCH v2 09/12] OvmfPkg/LsiScsiDxe: Examine the incoming SCSI Request Packet Gary Lin
2020-07-16 7:46 ` [PATCH v2 10/12] OvmfPkg/LsiScsiDxe: Process the " Gary Lin
2020-07-16 17:37 ` Laszlo Ersek
2020-07-17 2:28 ` Gary Lin
2020-07-16 7:46 ` [PATCH v2 11/12] OvmfPkg/LsiScsiDxe: Calculate the transferred bytes Gary Lin
2020-07-16 18:21 ` Laszlo Ersek
2020-07-17 3:15 ` Gary Lin
2020-07-16 7:46 ` [PATCH v2 12/12] Maintainers.txt: Add Gary Lin as the reviewer for LsiScsi driver Gary Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200716074607.18048-6-glin@suse.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox