From: "Gary Lin" <glin@suse.com>
To: devel@edk2.groups.io
Cc: Jordan Justen <jordan.l.justen@intel.com>,
Laszlo Ersek <lersek@redhat.com>,
Ard Biesheuvel <ard.biesheuvel@arm.com>
Subject: [PATCH v2 06/12] OvmfPkg/LsiScsiDxe: Report Targets and LUNs
Date: Thu, 16 Jul 2020 15:46:01 +0800 [thread overview]
Message-ID: <20200716074607.18048-7-glin@suse.com> (raw)
In-Reply-To: <20200716074607.18048-1-glin@suse.com>
Implement LsiScsiGetNextTargetLun(), LsiScsiBuildDevicePath(),
LsiScsiGetTargetLun(), and LsiScsiGetNextTarget() to report Targets and
LUNs and build the device path.
This commit also introduces two PCD value: PcdLsiScsiMaxTargetLimit and
PcdLsiScsiMaxLunLimit as the limits for Targets and LUNs.
v2:
- Zero out (*Target) in LsiScsiGetTargetLun()
- Use CopyMem() instead of the one-byte shortcut to copy target from
ScsiDevicePath->Pun
- Add asserts for PcdLsiScsiMaxTargetLimit and PcdLsiScsiMaxLunLimit
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
---
OvmfPkg/LsiScsiDxe/LsiScsi.c | 148 +++++++++++++++++++++++++++++-
OvmfPkg/LsiScsiDxe/LsiScsi.h | 3 +
OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf | 6 ++
OvmfPkg/OvmfPkg.dec | 5 +
4 files changed, 160 insertions(+), 2 deletions(-)
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.c b/OvmfPkg/LsiScsiDxe/LsiScsi.c
index 67fadb411e85..989bda88d209 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.c
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.c
@@ -15,6 +15,7 @@
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/MemoryAllocationLib.h>
+#include <Library/PcdLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Protocol/PciIo.h>
@@ -53,6 +54,49 @@ LsiScsiGetNextTargetLun (
IN OUT UINT64 *Lun
)
{
+ LSI_SCSI_DEV *Dev;
+ UINTN Idx;
+ UINT8 *Target;
+ UINT16 LastTarget;
+
+ //
+ // the TargetPointer input parameter is unnecessarily a pointer-to-pointer
+ //
+ Target = *TargetPointer;
+
+ //
+ // Search for first non-0xFF byte. If not found, return first target & LUN.
+ //
+ for (Idx = 0; Idx < TARGET_MAX_BYTES && Target[Idx] == 0xFF; ++Idx)
+ ;
+ if (Idx == TARGET_MAX_BYTES) {
+ SetMem (Target, TARGET_MAX_BYTES, 0x00);
+ *Lun = 0;
+ return EFI_SUCCESS;
+ }
+
+ CopyMem (&LastTarget, Target, sizeof LastTarget);
+
+ //
+ // increment (target, LUN) pair if valid on input
+ //
+ Dev = LSI_SCSI_FROM_PASS_THRU (This);
+ if (LastTarget > Dev->MaxTarget || *Lun > Dev->MaxLun) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*Lun < Dev->MaxLun) {
+ ++*Lun;
+ return EFI_SUCCESS;
+ }
+
+ if (LastTarget < Dev->MaxTarget) {
+ *Lun = 0;
+ ++LastTarget;
+ CopyMem (Target, &LastTarget, sizeof LastTarget);
+ return EFI_SUCCESS;
+ }
+
return EFI_NOT_FOUND;
}
@@ -65,7 +109,34 @@ LsiScsiBuildDevicePath (
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
)
{
- return EFI_NOT_FOUND;
+ UINT16 TargetValue;
+ LSI_SCSI_DEV *Dev;
+ SCSI_DEVICE_PATH *ScsiDevicePath;
+
+ if (DevicePath == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ CopyMem (&TargetValue, Target, sizeof TargetValue);
+ Dev = LSI_SCSI_FROM_PASS_THRU (This);
+ if (TargetValue > Dev->MaxTarget || Lun > Dev->MaxLun || Lun > 0xFFFF) {
+ return EFI_NOT_FOUND;
+ }
+
+ ScsiDevicePath = AllocatePool (sizeof *ScsiDevicePath);
+ if (ScsiDevicePath == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ ScsiDevicePath->Header.Type = MESSAGING_DEVICE_PATH;
+ ScsiDevicePath->Header.SubType = MSG_SCSI_DP;
+ ScsiDevicePath->Header.Length[0] = (UINT8) sizeof *ScsiDevicePath;
+ ScsiDevicePath->Header.Length[1] = (UINT8) (sizeof *ScsiDevicePath >> 8);
+ ScsiDevicePath->Pun = TargetValue;
+ ScsiDevicePath->Lun = (UINT16) Lun;
+
+ *DevicePath = &ScsiDevicePath->Header;
+ return EFI_SUCCESS;
}
EFI_STATUS
@@ -77,7 +148,33 @@ LsiScsiGetTargetLun (
OUT UINT64 *Lun
)
{
- return EFI_UNSUPPORTED;
+ SCSI_DEVICE_PATH *ScsiDevicePath;
+ LSI_SCSI_DEV *Dev;
+ UINT8 *Target;
+
+ if (DevicePath == NULL || TargetPointer == NULL || *TargetPointer == NULL ||
+ Lun == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (DevicePath->Type != MESSAGING_DEVICE_PATH ||
+ DevicePath->SubType != MSG_SCSI_DP) {
+ return EFI_UNSUPPORTED;
+ }
+
+ ScsiDevicePath = (SCSI_DEVICE_PATH *) DevicePath;
+ Dev = LSI_SCSI_FROM_PASS_THRU (This);
+ if (ScsiDevicePath->Pun > Dev->MaxTarget ||
+ ScsiDevicePath->Lun > Dev->MaxLun) {
+ return EFI_NOT_FOUND;
+ }
+
+ Target = *TargetPointer;
+ ZeroMem (Target, TARGET_MAX_BYTES);
+ CopyMem (Target, &ScsiDevicePath->Pun, sizeof ScsiDevicePath->Pun);
+ *Lun = ScsiDevicePath->Lun;
+
+ return EFI_SUCCESS;
}
EFI_STATUS
@@ -107,6 +204,42 @@ LsiScsiGetNextTarget (
IN OUT UINT8 **TargetPointer
)
{
+ LSI_SCSI_DEV *Dev;
+ UINTN Idx;
+ UINT8 *Target;
+ UINT16 LastTarget;
+
+ //
+ // the TargetPointer input parameter is unnecessarily a pointer-to-pointer
+ //
+ Target = *TargetPointer;
+
+ //
+ // Search for first non-0xFF byte. If not found, return first target.
+ //
+ for (Idx = 0; Idx < TARGET_MAX_BYTES && Target[Idx] == 0xFF; ++Idx)
+ ;
+ if (Idx == TARGET_MAX_BYTES) {
+ SetMem (Target, TARGET_MAX_BYTES, 0x00);
+ return EFI_SUCCESS;
+ }
+
+ CopyMem (&LastTarget, Target, sizeof LastTarget);
+
+ //
+ // increment target if valid on input
+ //
+ Dev = LSI_SCSI_FROM_PASS_THRU (This);
+ if (LastTarget > Dev->MaxTarget) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (LastTarget < Dev->MaxTarget) {
+ ++LastTarget;
+ CopyMem (Target, &LastTarget, sizeof LastTarget);
+ return EFI_SUCCESS;
+ }
+
return EFI_NOT_FOUND;
}
@@ -189,6 +322,17 @@ LsiScsiControllerStart (
Dev->Signature = LSI_SCSI_DEV_SIGNATURE;
+ STATIC_ASSERT (
+ FixedPcdGet8 (PcdLsiScsiMaxTargetLimit) < 8,
+ "LSI 53C895A supports targets [0..7]"
+ );
+ STATIC_ASSERT (
+ FixedPcdGet8 (PcdLsiScsiMaxLunLimit) < 128,
+ "LSI 53C895A supports LUNs [0..128]"
+ );
+ Dev->MaxTarget = PcdGet8 (PcdLsiScsiMaxTargetLimit);
+ Dev->MaxLun = PcdGet8 (PcdLsiScsiMaxLunLimit);
+
//
// Host adapter channel, doesn't exist
//
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.h b/OvmfPkg/LsiScsiDxe/LsiScsi.h
index c194dfbf3347..6c6ed25f1c33 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.h
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.h
@@ -14,6 +14,8 @@
typedef struct {
UINT32 Signature;
+ UINT8 MaxTarget;
+ UINT8 MaxLun;
EFI_EXT_SCSI_PASS_THRU_MODE PassThruMode;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL PassThru;
} LSI_SCSI_DEV;
@@ -23,6 +25,7 @@ typedef struct {
#define LSI_SCSI_FROM_PASS_THRU(PassThruPtr) \
CR (PassThruPtr, LSI_SCSI_DEV, PassThru, LSI_SCSI_DEV_SIGNATURE)
+
//
// Probe, start and stop functions of this driver, called by the DXE core for
// specific devices.
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf b/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf
index 14f9c68308cc..6111449577a8 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf
+++ b/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf
@@ -27,7 +27,9 @@ [Packages]
[LibraryClasses]
BaseLib
BaseMemoryLib
+ DebugLib
MemoryAllocationLib
+ PcdLib
UefiBootServicesTableLib
UefiDriverEntryPoint
UefiLib
@@ -35,3 +37,7 @@ [LibraryClasses]
[Protocols]
gEfiExtScsiPassThruProtocolGuid ## BY_START
gEfiPciIoProtocolGuid ## TO_START
+
+[FixedPcd]
+ gUefiOvmfPkgTokenSpaceGuid.PcdLsiScsiMaxTargetLimit ## CONSUMES
+ gUefiOvmfPkgTokenSpaceGuid.PcdLsiScsiMaxLunLimit ## CONSUMES
diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
index 2b0f137cbcce..ca13a3cb11d3 100644
--- a/OvmfPkg/OvmfPkg.dec
+++ b/OvmfPkg/OvmfPkg.dec
@@ -174,6 +174,11 @@ [PcdsFixedAtBuild]
## Microseconds to stall between polling for MptScsi request result
gUefiOvmfPkgTokenSpaceGuid.PcdMptScsiStallPerPollUsec|5|UINT32|0x3a
+ ## Set the *inclusive* number of targets and LUNs that LsiScsi exposes for
+ # scan by ScsiBusDxe.
+ gUefiOvmfPkgTokenSpaceGuid.PcdLsiScsiMaxTargetLimit|7|UINT8|0x3b
+ gUefiOvmfPkgTokenSpaceGuid.PcdLsiScsiMaxLunLimit|0|UINT8|0x3c
+
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogBase|0x0|UINT32|0x8
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogSize|0x0|UINT32|0x9
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareFdSize|0x0|UINT32|0xa
--
2.25.1
next prev parent reply other threads:[~2020-07-16 7:46 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-16 7:45 [PATCH v2 00/12] Introduce LsiScsi driver to OvmfPkg Gary Lin
2020-07-16 7:45 ` [PATCH v2 01/12] OvmfPkg/LsiScsiDxe: Create the empty driver Gary Lin
2020-07-16 7:45 ` [PATCH v2 02/12] OvmfPkg/LsiScsiDxe: Install the skeleton of driver binding Gary Lin
2020-07-16 7:45 ` [PATCH v2 03/12] OvmfPkg/LsiScsiDxe: Report the name of the driver Gary Lin
2020-07-16 7:45 ` [PATCH v2 04/12] OvmfPkg/LsiScsiDxe: Probe PCI devices and look for LsiScsi Gary Lin
2020-07-16 7:46 ` [PATCH v2 05/12] OvmfPkg/LsiScsiDxe: Install stubbed EXT_SCSI_PASS_THRU Gary Lin
2020-07-16 7:46 ` Gary Lin [this message]
2020-07-16 15:04 ` [PATCH v2 06/12] OvmfPkg/LsiScsiDxe: Report Targets and LUNs Laszlo Ersek
2020-07-16 16:19 ` Laszlo Ersek
2020-07-16 7:46 ` [PATCH v2 07/12] OvmfPkg/LsiScsiDxe: Open PciIo protocol and initialize the device Gary Lin
2020-07-16 16:07 ` Laszlo Ersek
2020-07-16 7:46 ` [PATCH v2 08/12] OvmfPkg/LsiScsiDxe: Map DMA buffer Gary Lin
2020-07-16 16:11 ` Laszlo Ersek
2020-07-16 7:46 ` [PATCH v2 09/12] OvmfPkg/LsiScsiDxe: Examine the incoming SCSI Request Packet Gary Lin
2020-07-16 7:46 ` [PATCH v2 10/12] OvmfPkg/LsiScsiDxe: Process the " Gary Lin
2020-07-16 17:37 ` Laszlo Ersek
2020-07-17 2:28 ` Gary Lin
2020-07-16 7:46 ` [PATCH v2 11/12] OvmfPkg/LsiScsiDxe: Calculate the transferred bytes Gary Lin
2020-07-16 18:21 ` Laszlo Ersek
2020-07-17 3:15 ` Gary Lin
2020-07-16 7:46 ` [PATCH v2 12/12] Maintainers.txt: Add Gary Lin as the reviewer for LsiScsi driver Gary Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200716074607.18048-7-glin@suse.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox