From: "Graeme Gregory" <graeme@nuviainc.com>
To: Tanmay Jagdale <tanmay.jagdale@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>,
devel@edk2.groups.io, Shashi Mallela <shashi.mallela@linaro.org>
Subject: Re: [PATCH v3 edk2-platforms 5/8] SbsaQemu: AcpiDxe: Create MADT table at runtime
Date: Thu, 27 Aug 2020 10:41:47 +0100 [thread overview]
Message-ID: <20200827094147.jvbcumhjr4r3p2wt@xora-monster> (raw)
In-Reply-To: <CAKJHY+904sxHtK0tWaqAqM4+2LRi85BnPamj2eqDzaA0n+VEYA@mail.gmail.com>
On Thu, Aug 27, 2020 at 08:26:21AM +0530, Tanmay Jagdale wrote:
> Hi Graeme,
>
>
> On Thu, 27 Aug 2020 at 04:18, Graeme Gregory <[1]graeme@nuviainc.com> wrote:
>
> On Wed, Aug 26, 2020 at 04:35:22PM +0100, Graeme Gregory wrote:
> > On Tue, Aug 25, 2020 at 07:09:55PM +0530, Tanmay Jagdale wrote:
> > > - Add support to create MADT table at runtime.
> > > - Included a macro for GIC Redistributor structure initialisation.
> > >
> > > Signed-off-by: Tanmay Jagdale <[2]tanmay.jagdale@linaro.org>
> > > ---
> > > Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.inf |
> 20 ++-
> > > Silicon/Qemu/SbsaQemu/Include/IndustryStandard/SbsaQemuAcpi.h |
> 15 ++
> > > Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.c |
> 156 ++++++++++++++++++++
> > > 3 files changed, 190 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/
> SbsaQemuAcpiDxe.inf b/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/
> SbsaQemuAcpiDxe.inf
> > > index 3795a7e11639..8125e8ba7553 100644
> > > --- a/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.inf
> > > +++ b/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.inf
> > > @@ -41,9 +41,27 @@ [LibraryClasses]
> > > UefiRuntimeServicesTableLib
> > >
> > > [Pcd]
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile
> > > gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdCoreCount
> > > gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdClusterCount
> > > gArmVirtSbsaQemuPlatformTokenSpaceGuid.PcdDeviceTreeBaseAddress
> > >
> > > [Depex]
> > > - TRUE
> > > + gEfiAcpiTableProtocolGuid ## CONSUMES
> > > +
> > > +[Guids]
> > > + gEdkiiPlatformHasAcpiGuid
> > > +
> > > +[Protocols]
> > > + gEfiAcpiTableProtocolGuid ## CONSUMES
> > > +
> > > +[FixedPcd]
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision
> > > + gArmTokenSpaceGuid.PcdGicDistributorBase
> > > + gArmTokenSpaceGuid.PcdGicRedistributorsBase
> > > +
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision
> > > diff --git a/Silicon/Qemu/SbsaQemu/Include/IndustryStandard/
> SbsaQemuAcpi.h b/Silicon/Qemu/SbsaQemu/Include/IndustryStandard/
> SbsaQemuAcpi.h
> > > index eac195b0585c..7a9a0061675f 100644
> > > --- a/Silicon/Qemu/SbsaQemu/Include/IndustryStandard/SbsaQemuAcpi.h
> > > +++ b/Silicon/Qemu/SbsaQemu/Include/IndustryStandard/SbsaQemuAcpi.h
> > > @@ -22,6 +22,21 @@
> > > FixedPcdGet32 (PcdAcpiDefaultCreatorRevision)/* UINT32
> CreatorRevision */ \
> > > }
> > >
> > > +// Defines for MADT
> > > +#define SBSAQEMU_MADT_GIC_VBASE 0x2c020000
> > > +#define SBSAQEMU_MADT_GIC_HBASE 0x2c010000
> > > +#define SBSAQEMU_MADT_GIC_PMU_IRQ 23
> > > +#define SBSAQEMU_MADT_GICR_SIZE 0x4000000
> > > +
> > > +// Macro for MADT GIC Redistributor Structure
> > > +#define SBSAQEMU_MADT_GICR_INIT() {
> \
> > > + EFI_ACPI_6_0_GICR, /* Type */
> \
> > > + sizeof (EFI_ACPI_6_0_GICR_STRUCTURE), /* Length */
> \
> > > + EFI_ACPI_RESERVED_WORD, /* Reserved */
> \
> > > + FixedPcdGet32 (PcdGicRedistributorsBase), /*
> DiscoveryRangeBaseAddress */ \
> > > + SBSAQEMU_MADT_GICR_SIZE /* DiscoveryRangeLength *
> / \
> > > + }
> > > +
> > > #define SBSAQEMU_UART0_BASE 0x60000000
> > >
> > > #define SBSAQEMU_PCI_SEG0_CONFIG_BASE 0xf0000000
> > > diff --git a/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/
> SbsaQemuAcpiDxe.c b/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/
> SbsaQemuAcpiDxe.c
> > > index 75abdae3b8ce..16cb4e904e6f 100644
> > > --- a/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.c
> > > +++ b/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.c
> > > @@ -6,11 +6,17 @@
> > > * SPDX-License-Identifier: BSD-2-Clause-Patent
> > > *
> > > **/
> > > +#include <IndustryStandard/Acpi.h>
> > > +#include <IndustryStandard/SbsaQemuAcpi.h>
> > > +#include <Library/AcpiLib.h>
> > > +#include <Library/BaseMemoryLib.h>
> > > #include <Library/DebugLib.h>
> > > +#include <Library/MemoryAllocationLib.h>
> > > #include <Library/PcdLib.h>
> > > #include <Library/UefiBootServicesTableLib.h>
> > > #include <Library/UefiDriverEntryPoint.h>
> > > #include <Library/UefiLib.h>
> > > +#include <Protocol/AcpiTable.h>
> > > #include <Protocol/FdtClient.h>
> > > #include <libfdt.h>
> > >
> > > @@ -61,6 +67,137 @@ CountCpusFromFdt (
> > > ASSERT_RETURN_ERROR (PcdStatus);
> > > }
> > >
> > > +/*
> > > + * A Function to Compute the ACPI Table Checksum
> > > + */
> > > +VOID
> > > +AcpiPlatformChecksum (
> > > + IN UINT8 *Buffer,
> > > + IN UINTN Size
> > > + )
> > > +{
> > > + UINTN ChecksumOffset;
> > > +
> > > + ChecksumOffset = OFFSET_OF (EFI_ACPI_DESCRIPTION_HEADER, Checksum);
> > > +
> > > + // Set checksum field to 0 since it is used as part of the
> calculation
> > > + Buffer[ChecksumOffset] = 0;
> > > +
> > > + Buffer[ChecksumOffset] = CalculateCheckSum8(Buffer, Size);
> > > +}
> > > +
> > > +/*
> > > + * A function that add the MADT ACPI table.
> > > + IN EFI_ACPI_COMMON_HEADER *CurrentTable
> > > + */
> > > +EFI_STATUS
> > > +AddMadtTable (
> > > + IN EFI_ACPI_TABLE_PROTOCOL *AcpiTable
> > > + )
> > > +{
> > > + EFI_STATUS Status;
> > > + UINTN TableHandle;
> > > + UINT32 TableSize;
> > > + EFI_PHYSICAL_ADDRESS PageAddress;
> > > + UINT8 *New;
> > > + UINT32 NumCores;
> > > +
> > > + // Initialize MADT ACPI Header
> > > + EFI_ACPI_6_0_MULTIPLE_APIC_DESCRIPTION_TABLE_HEADER Header = {
> > > + SBSAQEMU_ACPI_HEADER
> (EFI_ACPI_6_0_MULTIPLE_APIC_DESCRIPTION_TABLE_SIGNATURE,
> > > +
> EFI_ACPI_6_0_MULTIPLE_APIC_DESCRIPTION_TABLE_HEADER,
> > > +
> EFI_ACPI_6_0_MULTIPLE_APIC_DESCRIPTION_TABLE_REVISION),
> > > + 0, 0 };
> > > +
> > > + // Initialize GICC Structure
> > > + EFI_ACPI_6_0_GIC_STRUCTURE Gicc = EFI_ACPI_6_0_GICC_STRUCTURE_INIT (
> > > + 0, /* GicID */
> > > + 0, /* AcpiCpuUid */
> > > + 0, /* Mpidr */
> > > + EFI_ACPI_6_0_GIC_ENABLED, /* Flags */
> > > + SBSAQEMU_MADT_GIC_PMU_IRQ, /* PMU Irq */
> > > + FixedPcdGet32 (PcdGicDistributorBase), /* PhysicalBaseAddress */
> > > + SBSAQEMU_MADT_GIC_VBASE, /* GicVBase */
> > > + SBSAQEMU_MADT_GIC_HBASE, /* GicHBase */
> > > + 25, /* GsivId */
> > > + 0, /* GicRBase */
> > > + 0 /* Efficiency */
> > > + );
> > > +
> > > + // Initialize GIC Distributor Structure
> > > + EFI_ACPI_6_0_GIC_DISTRIBUTOR_STRUCTURE Gicd =
> > > + EFI_ACPI_6_0_GIC_DISTRIBUTOR_INIT (
> > > + 0,
> > > + FixedPcdGet32 (PcdGicDistributorBase),
> > > + 0,
> > > + 3 /* GicVersion */
> > > + );
> > > +
> > > + // Initialize GIC Redistributor Structure
> > > + EFI_ACPI_6_0_GICR_STRUCTURE Gicr = SBSAQEMU_MADT_GICR_INIT();
> > > +
> > > + // Get CoreCount which was determined eariler after parsing device
> tree
> > > + NumCores = PcdGet32 (PcdCoreCount);
> > > +
> > > + // Calculate the new table size based on the number of cores
> > > + TableSize = sizeof
> (EFI_ACPI_6_0_MULTIPLE_APIC_DESCRIPTION_TABLE_HEADER) +
> > > + (sizeof (EFI_ACPI_6_0_GIC_STRUCTURE) * NumCores) +
> > > + sizeof (EFI_ACPI_6_0_GIC_DISTRIBUTOR_STRUCTURE) +
> > > + sizeof (EFI_ACPI_6_0_GICR_STRUCTURE);
> > > +
> > > + Status = gBS->AllocatePages (
> > > + AllocateAnyPages,
> > > + EfiACPIReclaimMemory,
> > > + EFI_SIZE_TO_PAGES (TableSize),
> > > + &PageAddress
> > > + );
> > > + if (EFI_ERROR(Status)) {
> > > + DEBUG ((DEBUG_ERROR, "Failed to allocate pages for MADT table\
> n"));
> > > + return EFI_OUT_OF_RESOURCES;
> > > + }
> > > +
> > > + New = (UINT8 *)(UINTN) PageAddress;
> > > + ZeroMem (New, TableSize);
> > > +
> > > + // Add the ACPI Description table header
> > > + CopyMem (New, &Header, sizeof
> (EFI_ACPI_6_0_MULTIPLE_APIC_DESCRIPTION_TABLE_HEADER));
> > > + ((EFI_ACPI_DESCRIPTION_HEADER*) New)->Length = TableSize;
> > > + New += sizeof (EFI_ACPI_6_0_MULTIPLE_APIC_DESCRIPTION_TABLE_HEADER);
> > > +
> > > + // Add new GICC structures for the Cores
> > > + for (NumCores = 0; NumCores < PcdGet32 (PcdCoreCount); NumCores++) {
> > > + EFI_ACPI_6_0_GIC_STRUCTURE *GiccPtr;
> > > +
> > > + CopyMem (New, &Gicc, sizeof (EFI_ACPI_6_0_GIC_STRUCTURE));
> > > + GiccPtr = (EFI_ACPI_6_0_GIC_STRUCTURE *) New;
> > > + GiccPtr->AcpiProcessorUid = NumCores;
> > > + GiccPtr->MPIDR = NumCores;
> >
> > This does not seem to be quite correct, if I dump the MPIDRs from ARM-TF
> when
> > booting with 12 cpus this is what I get.
> >
> > NOTICE: MPIDR 0
> > NOTICE: MPIDR 1
> > NOTICE: MPIDR 2
> > NOTICE: MPIDR 3
> > NOTICE: MPIDR 4
> > NOTICE: MPIDR 5
> > NOTICE: MPIDR 6
> > NOTICE: MPIDR 7
> > NOTICE: MPIDR 100
> > NOTICE: MPIDR 101
> > NOTICE: MPIDR 102
> > NOTICE: MPIDR 103
> >
> > I think this will make PSCI operations from CPU8 onwards fail.
> >
>
> I can confirm this is wrong
>
> I did a quick hack
>
> GiccPtr->MPIDR = ((NumCores / 8) << 8) | (NumCores % 8);
>
>
> Thanks for the fix.
>
>
> and I can boot 128 cores (MPIDR also needs fixed in SSDT I think)
>
> [ 12.637579] GICv3: CPU127: found redistributor f07 region
> 0:0x0000000041060000
> [ 12.640185] CPU127: Booted secondary processor 0x0000000f07
> [0x411fd070]
> [ 12.676961] smp: Brought up 1 node, 128 CPUs
>
> Considering this patch is in the works
>
> [3]https://lists.gnu.org/archive/html/qemu-devel/2020-08/msg06223.html
>
> which add MPIDR to the DT, i think you will when that is accepted be
> able to use the MPIDR from there and then you are protected for the
> CPU topology changing.
>
>
> So shall I push an interim patch that uses the aforementioned formula
> to derive the MPIDR ? Or wait for the qemu patch to get merged and
> then read MPIDR directly from there ?
>
IMHO wait for to see progress on Leif's patch, then issue an update to
read the MPIDR from the FDT. Obviously you can start the
development/review process for that before patch lands.
The formula only works because I happen to know what qemu generates today.
This might change with a qemu change in future though.
Graeme
next prev parent reply other threads:[~2020-08-27 9:41 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-25 13:39 [PATCH v3 edk2-platforms 0/8] Add ACPI tables support for SbsaQemu Tanmay Jagdale
2020-08-25 13:39 ` [PATCH v3 edk2-platforms 1/8] SbsaQemu: Initial support for static ACPI tables Tanmay Jagdale
2020-08-25 13:39 ` [PATCH v3 edk2-platforms 2/8] SbsaQemu: AcpiTables: Add PCI support and MCFG Table Tanmay Jagdale
2020-08-25 13:39 ` [PATCH v3 edk2-platforms 3/8] SbsaQemu: SbsaQemu.dsc: Move CoreCount and Fdtlib Tanmay Jagdale
2020-08-25 13:39 ` [PATCH v3 edk2-platforms 4/8] SbsaQemu: Add new ACPI driver and FDT parser to count CPUs Tanmay Jagdale
2020-08-25 13:39 ` [PATCH v3 edk2-platforms 5/8] SbsaQemu: AcpiDxe: Create MADT table at runtime Tanmay Jagdale
2020-08-26 15:35 ` graeme
2020-08-26 22:48 ` Graeme Gregory
2020-08-27 2:56 ` Tanmay Jagdale
2020-08-27 9:41 ` Graeme Gregory [this message]
2020-08-25 13:39 ` [PATCH v3 edk2-platforms 6/8] SbsaQemu: AcpiDxe: Create SSDT " Tanmay Jagdale
2020-08-25 13:39 ` [PATCH v3 edk2-platforms 7/8] SbsaQemu: AcpiDxe: Create PPTT " Tanmay Jagdale
2020-08-25 13:39 ` [PATCH v3 edk2-platforms 8/8] SbsaQemu: AcpiTables: Add DBG2 Table Tanmay Jagdale
2020-08-25 13:57 ` [PATCH v3 edk2-platforms 0/8] Add ACPI tables support for SbsaQemu Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200827094147.jvbcumhjr4r3p2wt@xora-monster \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox