[edk2-platforms][PATCH v2 0/3] Revise Readme for RISC-V updates

[edk2-platforms][PATCH v2 0/3] Revise Readme for RISC-V updates

[Abner Chang]

Update below Readme.md,
 - edk2-platforms/Readme.md
 - Platform/RISC-V/PlatformPkg/Readme.md
 - Platform/SiFive/U5SeriesPkg/Readme.md

Abner Chang (3):
  edk2-platforms: Revise Readme.md
  RISC-V/PlatformPkg: Revise Readme.md
  Platform/U5SeriesPkg: Revise Readme.md

 Platform/RISC-V/PlatformPkg/Readme.md |  74 +++++++++--------
 Platform/SiFive/U5SeriesPkg/Readme.md | 114 ++++++++++++++------------
 Readme.md                             |   1 +
 3 files changed, 99 insertions(+), 90 deletions(-)

-- 
2.25.0

[edk2-platforms][PATCH v2 1/3] edk2-platforms: Revise Readme.md

[Abner Chang]

Mention to update submodule under for edk2-platforms. It is for RISC-V OpenSBI library.

Signed-off-by: Abner Chang <abner.chang@hpe.com>
Co-authored-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>

Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
 Readme.md | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Readme.md b/Readme.md
index 0675685fb7..d896b2c5fc 100644
--- a/Readme.md
+++ b/Readme.md
@@ -97,6 +97,7 @@ target-specific binutils. These are included with any prepackaged GCC toolchain
    $ git submodule update --init
    ...
    $ git clone https://github.com/tianocore/edk2-platforms.git
+   $ git submodule update --init
    ...
    $ git clone https://github.com/tianocore/edk2-non-osi.git
    ```
-- 
2.25.0

[edk2-platforms][PATCH v2 2/3] RISC-V/PlatformPkg: Revise Readme.md

[Abner Chang]

Update RISC-V PlatformPkg Readme.md to align with the latest implementation.

Signed-off-by: Abner Chang <abner.chang@hpe.com>
Co-authored-by: Daniel Schaefer <daniel.schaefer@hpe.com>

Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
---
 Platform/RISC-V/PlatformPkg/Readme.md | 74 ++++++++++++++-------------
 1 file changed, 38 insertions(+), 36 deletions(-)

diff --git a/Platform/RISC-V/PlatformPkg/Readme.md b/Platform/RISC-V/PlatformPkg/Readme.md
index 2632ebeb28..1ff649eaf7 100644
--- a/Platform/RISC-V/PlatformPkg/Readme.md
+++ b/Platform/RISC-V/PlatformPkg/Readme.md
@@ -1,49 +1,48 @@
 # Introduction
 
-## EDK2 RISC-V Platform Packages
-RISC-V platform package provides the generic and common modules for RISC-V
-platforms. RISC-V platform package could include RiscPlatformPkg.dec to
-use the common drivers, libraries, definitions, PCDs and etc. for the
-platform development.
+## EDK2 RISC-V Platform Project
+The edk2 build architecture which is supported and verified on edk2 code base for RISC-V platforms is `RISCV64`.
+The toolchain is on RISC-V GitHub (https://github.com/riscv/riscv-gnu-toolchain) for building edk2 RISC-V binary.
+The corresponding edk2 Toolchain tag for building RISC-V platform is "GCC5" declared in `tools_def.txt`.
 
-There are two packages to support RISC-V:
-- `edk2-platforms/Silicon/RISC-V/ProcessorPkg/RiscVProcessorPkg.dec`
-- `edk2-platforms/Platform/RISC-V/PlatformPkg/RiscVPlatformPkg.dec`
+There are two packages to support RISC-V edk2 platforms:
+- `Silicon/RISC-V/ProcessorPkg/RiscVProcessorPkg.dec`
+- `Platform/RISC-V/PlatformPkg/RiscVPlatformPkg.dec`
 
-`RiscVPlatformPkg` provides SEC phase and NULL libs.
-`RiscVProcessorPkg` provides many libraries, PEIMs and DXE drivers.
+`RiscVPlatformPkg` currently provides the generic SEC driver for all RISC-V platforms, and some platform level libraries.
+`RiscVProcessorPkg` currently provides RISC-V processor related libraries, PEI modules, DXE drivers and industrial
+standard header files.
 
-### Download the sources ###
+## EDK2 RISC-V Platform Package
+RISC-V platform package provides the common modules for RISC-V platforms. RISC-V platform vendors could include
+RiscPlatformPkg.dec to use the common drivers, libraries, definitions, PCDs and etc. for the
+RISC-V platforms development.
+
+### Download the Source Code ###
 ```
 git clone https://github.com/tianocore/edk2.git
+git clone https://github.com/tianocore/edk2-platforms.git
 
-git clone https://github.com/changab/edk2-platforms.git
-# Check out branch: riscv-smode-lib
 ```
 
-To build it, you have to follow the regular steps for EDK2 and additionally set
-an environmen variable to point to your RISC-V toolchain installation,
-including the binary prefixes:
-
+You have to follow the build steps for EDK2 (https://github.com/tianocore/tianocore.github.io/wiki/Getting-Started-with-EDK-II)
+and additionally set an environment variable to point to your RISC-V toolchain binaries for building RISC-V
+platforms,
 ```
+# e.g. If the toolchain binaries are under /riscv-gnu-toolchain-binaries/bin
 export GCC5_RISCV64_PREFIX=/riscv-gnu-toolchain-binaries/bin/riscv64-unknown-elf-
 ```
 
-Then you can build the image for the SiFive HifiveUnleashed platform:
+Then you can build the edk2 firmware image for RISC-V platforms.
 
 ```
+# e.g. For building SiFive Hifive Unleashed platform:
 build -a RISCV64 -t GCC5 -p Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/U540.dsc
 ```
 
-### EDK2 project
-All changes in edk2 are upstream, however, most of the RISC-V code is in
-edk2-platforms. Therefore you have to check out the branch `riscv-smode-lib` on
-`github.com/changab/edk2-platforms`.
-
-The build architecture which is supported and verified so far is `RISCV64`.
-The latest master of the RISC-V toolchain https://github.com/riscv/riscv-gnu-toolchain
-should work but the latest verified commit is `b468107e701433e1caca3dbc8aef8d40`.
-Toolchain tag is "GCC5" declared in `tools_def.txt`
+## RISC-V OpenSBI Library
+RISC-V [OpenSBI](https://github.com/riscv/opensbi) is the implementation of [RISC-V SBI (Supervisor Binary Interface) specification](https://github.com/riscv/riscv-sbi-doc). For EDK2 UEFI firmware solution, RISC-V OpenSBI is integrated as a library [(submoudule)](Silicon/RISC-V/ProcessorPkg/Library/RiscVOpensbiLib/opensbi) in EDK2 RISC-V Processor Package. The RISC-V OpenSBI library is built in SEC driver
+without any modifications and provides the interfaces for supervisor mode execution environment to execute privileged operations.
 
 ## RISC-V Platform PCD settings
 ### EDK2 Firmware Volume Settings
@@ -54,9 +53,9 @@ EDK2 Firmware volume related PCDs which declared in platform FDF file.
 |PcdRiscVSecFvBase| The base address of SEC Firmware Volume|
 |PcdRiscVSecFvSize| The size of SEC Firmware Volume|
 |PcdRiscVPeiFvBase| The base address of PEI Firmware Volume|
-|PcdRiscVPeiFvSize| The size of SEC Firmware Volume|
+|PcdRiscVPeiFvSize| The size of PEI Firmware Volume|
 |PcdRiscVDxeFvBase| The base address of DXE Firmware Volume|
-|PcdRiscVDxeFvSize| The size of SEC Firmware Volume|
+|PcdRiscVDxeFvSize| The size of DXE Firmware Volume|
 
 ### EDK2 EFI Variable Region Settings
 The PCD settings regard to EFI Variable
@@ -84,21 +83,24 @@ Below PCDs could be set in platform FDF file.
 |--------------|---------|
 |PcdHartCount| Number of RISC-V HARTs, the value is processor-implementation specific|
 |PcdBootHartId| The ID of RISC-V HART to execute main fimrware code and boot system to OS|
+|PcdBootableHartNumber|The bootable HART number, which is incorporate with RISC-V OpenSBI platform hart_index2id value|
 
 ### RISC-V OpenSBI Settings
 
 | **PCD name** |**Usage**|
 |--------------|---------|
-|PcdScratchRamBase| The base address of OpenSBI scratch buffer for all RISC-V HARTs|
-|PcdScratchRamSize| The total size of OpenSBI scratch buffer for all RISC-V HARTs|
-|PcdOpenSbiStackSize| The size of initial stack of each RISC-V HART for booting system use OpenSBI|
+|PcdScratchRamBase| The base address of RISC-V OpenSBI scratch buffer for all RISC-V HARTs|
+|PcdScratchRamSize| The total size of RISC-V OpenSBI scratch buffer for all RISC-V HARTs|
+|PcdOpenSbiStackSize| The size of initial stack of each RISC-V HART for booting system use RISC-V OpenSBI|
 |PcdTemporaryRamBase| The base address of temporary memory for PEI phase|
 |PcdTemporaryRamSize| The temporary memory size for PEI phase|
+|PcdPeiCorePrivilegeMode|The target RISC-V privilege mode for edk2 PEI phase|
 
 ## Supported Operating Systems
-Only support to boot to EFI Shell so far.
-
-Porting GRUB2 and Linux EFISTUB is in progress.
+Currently support boot to EFI Shell and Linux kernel.
+Refer to below link for more information,
+https://github.com/riscv/riscv-uefi-edk2-docs
 
 ## Known Issues and Limitations
-Only RISC-V RV64 is verified.
+Only RISC-V RV64 is verified on edk2.
+
-- 
2.25.0

Re: [edk2-platforms][PATCH v2 2/3] RISC-V/PlatformPkg: Revise Readme.md

[Daniel Schaefer]

Single small thing below, then
Reviewed-By: Daniel Schaefer <daniel.schaefer@hpe.com>

On 8/27/20 5:43 PM, Abner Chang wrote:
> Update RISC-V PlatformPkg Readme.md to align with the latest implementation.
> 
> Signed-off-by: Abner Chang <abner.chang@hpe.com>
> Co-authored-by: Daniel Schaefer <daniel.schaefer@hpe.com>
> 
> Cc: Leif Lindholm <leif@nuviainc.com>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
> ---
>   Platform/RISC-V/PlatformPkg/Readme.md | 74 ++++++++++++++-------------
>   1 file changed, 38 insertions(+), 36 deletions(-)
> 
> diff --git a/Platform/RISC-V/PlatformPkg/Readme.md b/Platform/RISC-V/PlatformPkg/Readme.md
> index 2632ebeb28..1ff649eaf7 100644
> --- a/Platform/RISC-V/PlatformPkg/Readme.md
> +++ b/Platform/RISC-V/PlatformPkg/Readme.md
> @@ -1,49 +1,48 @@
>   # Introduction
>   
> -## EDK2 RISC-V Platform Packages
> -RISC-V platform package provides the generic and common modules for RISC-V
> -platforms. RISC-V platform package could include RiscPlatformPkg.dec to
> -use the common drivers, libraries, definitions, PCDs and etc. for the
> -platform development.
> +## EDK2 RISC-V Platform Project
> +The edk2 build architecture which is supported and verified on edk2 code base for RISC-V platforms is `RISCV64`.
> +The toolchain is on RISC-V GitHub (https://github.com/riscv/riscv-gnu-toolchain) for building edk2 RISC-V binary.
> +The corresponding edk2 Toolchain tag for building RISC-V platform is "GCC5" declared in `tools_def.txt`.
>   
> -There are two packages to support RISC-V:
> -- `edk2-platforms/Silicon/RISC-V/ProcessorPkg/RiscVProcessorPkg.dec`
> -- `edk2-platforms/Platform/RISC-V/PlatformPkg/RiscVPlatformPkg.dec`
> +There are two packages to support RISC-V edk2 platforms:
> +- `Silicon/RISC-V/ProcessorPkg/RiscVProcessorPkg.dec`
> +- `Platform/RISC-V/PlatformPkg/RiscVPlatformPkg.dec`
>   
> -`RiscVPlatformPkg` provides SEC phase and NULL libs.
> -`RiscVProcessorPkg` provides many libraries, PEIMs and DXE drivers.
> +`RiscVPlatformPkg` currently provides the generic SEC driver for all RISC-V platforms, and some platform level libraries.
> +`RiscVProcessorPkg` currently provides RISC-V processor related libraries, PEI modules, DXE drivers and industrial
> +standard header files.
>   
> -### Download the sources ###
> +## EDK2 RISC-V Platform Package
> +RISC-V platform package provides the common modules for RISC-V platforms. RISC-V platform vendors could include
> +RiscPlatformPkg.dec to use the common drivers, libraries, definitions, PCDs and etc. for the
> +RISC-V platforms development.
> +
> +### Download the Source Code ###
>   ```
>   git clone https://github.com/tianocore/edk2.git
> +git clone https://github.com/tianocore/edk2-platforms.git
>   
> -git clone https://github.com/changab/edk2-platforms.git
> -# Check out branch: riscv-smode-lib
>   ```
>   
> -To build it, you have to follow the regular steps for EDK2 and additionally set
> -an environmen variable to point to your RISC-V toolchain installation,
> -including the binary prefixes:
> -
> +You have to follow the build steps for EDK2 (https://github.com/tianocore/tianocore.github.io/wiki/Getting-Started-with-EDK-II)
> +and additionally set an environment variable to point to your RISC-V toolchain binaries for building RISC-V
> +platforms,
>   ```
> +# e.g. If the toolchain binaries are under /riscv-gnu-toolchain-binaries/bin
>   export GCC5_RISCV64_PREFIX=/riscv-gnu-toolchain-binaries/bin/riscv64-unknown-elf-
>   ```
>   
> -Then you can build the image for the SiFive HifiveUnleashed platform:
> +Then you can build the edk2 firmware image for RISC-V platforms.
>   
>   ```
> +# e.g. For building SiFive Hifive Unleashed platform:
>   build -a RISCV64 -t GCC5 -p Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/U540.dsc
>   ```
>   
> -### EDK2 project
> -All changes in edk2 are upstream, however, most of the RISC-V code is in
> -edk2-platforms. Therefore you have to check out the branch `riscv-smode-lib` on
> -`github.com/changab/edk2-platforms`.
> -
> -The build architecture which is supported and verified so far is `RISCV64`.
> -The latest master of the RISC-V toolchain https://github.com/riscv/riscv-gnu-toolchain
> -should work but the latest verified commit is `b468107e701433e1caca3dbc8aef8d40`.
> -Toolchain tag is "GCC5" declared in `tools_def.txt`
> +## RISC-V OpenSBI Library
> +RISC-V [OpenSBI](https://github.com/riscv/opensbi) is the implementation of [RISC-V SBI (Supervisor Binary Interface) specification](https://github.com/riscv/riscv-sbi-doc). For EDK2 UEFI firmware solution, RISC-V OpenSBI is integrated as a library [(submoudule)](Silicon/RISC-V/ProcessorPkg/Library/RiscVOpensbiLib/opensbi) in EDK2 RISC-V Processor Package. The RISC-V OpenSBI library is built in SEC driver

wrap this please. Preferably not cutting the links [foo](bar) in half.

> +without any modifications and provides the interfaces for supervisor mode execution environment to execute privileged operations.
>   
>   ## RISC-V Platform PCD settings
>   ### EDK2 Firmware Volume Settings
> @@ -54,9 +53,9 @@ EDK2 Firmware volume related PCDs which declared in platform FDF file.
>   |PcdRiscVSecFvBase| The base address of SEC Firmware Volume|
>   |PcdRiscVSecFvSize| The size of SEC Firmware Volume|
>   |PcdRiscVPeiFvBase| The base address of PEI Firmware Volume|
> -|PcdRiscVPeiFvSize| The size of SEC Firmware Volume|
> +|PcdRiscVPeiFvSize| The size of PEI Firmware Volume|
>   |PcdRiscVDxeFvBase| The base address of DXE Firmware Volume|
> -|PcdRiscVDxeFvSize| The size of SEC Firmware Volume|
> +|PcdRiscVDxeFvSize| The size of DXE Firmware Volume|
>   
>   ### EDK2 EFI Variable Region Settings
>   The PCD settings regard to EFI Variable
> @@ -84,21 +83,24 @@ Below PCDs could be set in platform FDF file.
>   |--------------|---------|
>   |PcdHartCount| Number of RISC-V HARTs, the value is processor-implementation specific|
>   |PcdBootHartId| The ID of RISC-V HART to execute main fimrware code and boot system to OS|
> +|PcdBootableHartNumber|The bootable HART number, which is incorporate with RISC-V OpenSBI platform hart_index2id value|
>   
>   ### RISC-V OpenSBI Settings
>   
>   | **PCD name** |**Usage**|
>   |--------------|---------|
> -|PcdScratchRamBase| The base address of OpenSBI scratch buffer for all RISC-V HARTs|
> -|PcdScratchRamSize| The total size of OpenSBI scratch buffer for all RISC-V HARTs|
> -|PcdOpenSbiStackSize| The size of initial stack of each RISC-V HART for booting system use OpenSBI|
> +|PcdScratchRamBase| The base address of RISC-V OpenSBI scratch buffer for all RISC-V HARTs|
> +|PcdScratchRamSize| The total size of RISC-V OpenSBI scratch buffer for all RISC-V HARTs|
> +|PcdOpenSbiStackSize| The size of initial stack of each RISC-V HART for booting system use RISC-V OpenSBI|
>   |PcdTemporaryRamBase| The base address of temporary memory for PEI phase|
>   |PcdTemporaryRamSize| The temporary memory size for PEI phase|
> +|PcdPeiCorePrivilegeMode|The target RISC-V privilege mode for edk2 PEI phase|
>   
>   ## Supported Operating Systems
> -Only support to boot to EFI Shell so far.
> -
> -Porting GRUB2 and Linux EFISTUB is in progress.
> +Currently support boot to EFI Shell and Linux kernel.
> +Refer to below link for more information,
> +https://github.com/riscv/riscv-uefi-edk2-docs
>   
>   ## Known Issues and Limitations
> -Only RISC-V RV64 is verified.
> +Only RISC-V RV64 is verified on edk2.
> +
> 

[edk2-platforms][PATCH v2 3/3] Platform/U5SeriesPkg: Revise Readme.md

[Abner Chang]

Update RISC-V U5SeriesPkg Readme.md to align with the latest implementation.

Signed-off-by: Abner Chang <abner.chang@hpe.com>
Co-authored-by: Daniel Schaefer <daniel.schaefer@hpe.com>

Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
---
 Platform/SiFive/U5SeriesPkg/Readme.md | 114 ++++++++++++++------------
 1 file changed, 60 insertions(+), 54 deletions(-)

diff --git a/Platform/SiFive/U5SeriesPkg/Readme.md b/Platform/SiFive/U5SeriesPkg/Readme.md
index 4d293e54f6..2ced71fa56 100644
--- a/Platform/SiFive/U5SeriesPkg/Readme.md
+++ b/Platform/SiFive/U5SeriesPkg/Readme.md
@@ -1,61 +1,61 @@
-# Introduction
-U5SeriesPkg provides the common EFI library and driver modules for SiFive
-U5 series core platforms. Currently the supported platforms are Freedom
-U500 VC707 platform and Freedom U540 HiFive Unleashed platform.
-
-Both platforms are built with below common packages,
-- **U5SeriesPkg**, edk2 platform branch
-  (Currently is in edk2-platforms/devel-riscvplatforms branch)
-- **RiscVPlatformPkg**, edk2 master branch
-  (Currently is in edk2-staging/RISC-V-V2 branch)
-- **RiscVPkg**, edk2 master branch
-  (Currently is in edk2-staging/RISC-V-V2 branch)
+# Introduction of SiFive U5 Series Platforms
+U5SeriesPkg provides the common EDK2 libraries and drivers for SiFive U5 series platforms. Currently the supported
+platforms are Freedom U500 VC707 platform and Freedom U540 HiFive Unleashed platform.
+
+Both platforms are built with below common edk2 packages under edk2-platforms repository,
+- [**U5SeriesPkg**](https://github.com/tianocore/edk2-platforms/tree/master/Platform/SiFive/U5SeriesPkg)
+- [**RiscVPlatformPkg**](https://github.com/tianocore/edk2-platforms/tree/master/Platform/RISC-V/PlatformPkg)
+- [**RiscVProcessorPkg**](https://github.com/tianocore/edk2-platforms/tree/master/Silicon/RISC-V/ProcessorPkg)
 
 ## U500 Platform
-This is a sample RISC-V EDK2 platform package used agaist SiFive Freedom U500
+This is a sample platform package used against to SiFive Freedom U500
 VC707 FPGA Dev Kit, please refer to "SiFive Freedom U500 VC707 FPGA Getting
 Started Guide" on https://www.sifive.com/documentation.
+The binary built from Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board can run on U500 VC707 FPGA board.
+```
+build -a RISCV64 -t GCC5 -p Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.dsc
+```
 
 ## U540 Platform
-This is a sample RISC-V EDK2 platform package used against SiFive Freedom U540
-HiFive Unleashed development board, please refer to "SiFive Freedom U540-C000
-Manual" on https://www.sifive.com.
-The binary built from Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/
-can run on main stream [QEMU](https://git.qemu.org/?p=qemu.git;a=summary)
-using qemu-system-riscv64 under riscv64-softmmu. Launch the binary with
+This is a sample platform package used for the SiFive Freedom U540 HiFive Unleashed development board, please refer to "SiFive Freedom U540-C000 Manual" on https://www.sifive.com.
+The binary built from Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/ can run on both hardware and
+[QEMU](https://git.qemu.org/?p=qemu.git;a=summary). It is confirmed that version 5.0 of QEMU can boot with this  firmware to EFI shell and Linux userspace.
+```
+build -a RISCV64 -t GCC5 -p Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/U540.dsc
+```
+For running U540 edk2 binary on QEMU, use qemu-system-riscv64 under riscv64-softmmu to launch the binary with
+below parameters,
 
 ```
--cpu sifive-u54 -machine sifive_u
+qemu-system-riscv64 -cpu sifive-u54 -machine sifive_u -bios U540.fd -m 2048 -nographic -smp cpus=5,maxcpus=5
 ```
 
-## Download the sources
+## Download the Source Code
 ```
-git clone https://github.com/tianocore/edk2-staging.git
-# Checkout RISC-V-V2 branch
+git clone https://github.com/tianocore/edk2.git
 git clone https://github.com/tianocore/edk2-platforms.git
-# Checkout devel-riscvplatforms branch
-git clone https://github.com/tianocore/edk2-non-osi.git
+# Below to clone opensbi submodule.
+git submodule update --init
 ```
-
-## Platform Owners
-Chang, Abner <abner.chang@hpe.com>
-Chen, Gilbert <gilbert.chen@hpe.com>
+Refer to [Readme.md](https://github.com/tianocore/edk2-platforms/blob/master/Platform/RISC-V/PlatformPkg/Readme.md) for building RISC-V platforms.
 
 ## Platform Status
-Currently the binary built from U500Pkg can boot SiFive Freedom U500 VC707
+**FreedomU500VC707Board**
+Currently the binary built from U500 edk2 package can boot SiFive Freedom U500 VC707
 FPGA to EFI shell with console in/out enabled.
 
-## Linux Build Instructions
-You can build the RISC-V platform using below script,
-`build -a RISCV64  -t GCC5 -p Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.dsc`
+**FreedomU540HiFiveUnleashedBoard**
+Currently the binary built from U540 edk2 package can boot SiFive Freedom U540 HiFive Unleashed
+to EFI shell with console in/out enabled and Linux kernel. Please refer to https://github.com/riscv/riscv-uefi-edk2-docs for booting to Linux kernel.
 
 ## Supported Operating Systems
-Only support to boot to EFI Shell so far.
+Please refer to https://github.com/riscv/riscv-uefi-edk2-docs.
 
 ## Known Issues and Limitations
 Only RISC-V RV64 is verified on this platform.
 
 ## Related Materials
+- [RISC-V UEFI Documents](https://github.com/riscv/riscv-uefi-edk2-docs)
 - [RISC-V OpenSbi](https://github.com/riscv/opensbi)
 - [SiFive U500 VC707 FPGA Getting Started Guide](https://sifive.cdn.prismic.io/sifive%2Fc248fabc-5e44-4412-b1c3-6bb6aac73a2c_sifive-u500-vc707-gettingstarted-v0.2.pdf)
 - [SiFive Freedom U540-C000 Manual](https://sifive.cdn.prismic.io/sifive%2F834354f0-08e6-423c-bf1f-0cb58ef14061_fu540-c000-v1.0.pdf)
@@ -63,48 +63,54 @@ Only RISC-V RV64 is verified on this platform.
 
 ## U5SeriesPkg Libraries and Drivers
 ### PeiCoreInfoHobLib
-This is the library to create RISC-V core characteristics for building up
-RISC-V related SMBIOS records to support the unified boot loader and OS image.
+This is the library to create RISC-V core characteristics for building up RISC-V related SMBIOS records to support
+a single boot loader  or OS image on all RISC-V platforms by discovering RISC-V hart configurations dynamically.
 This library leverage the silicon libraries provided in Silicon/SiFive.
 
 ### RiscVPlatformTimerLib
-This is common U5 series platform timer library which has the
-platform-specific timer implementation.
+This is common U5 series platform timer library which has the platform-specific timer implementation.
+
+### SerialLib
+This is common U5 series platform serial port library.
 
 ### TimerDxe
-This is U5 series platform timer DXE driver whcih has the platform-specific
-timer implementation.
+This is common U5 series platform timer DXE driver which has the platform-specific timer implementation.
 
 ## U500 Platform Libraries and Drivers
 ### RiscVOpensbiPlatformLib
-In order to reduce the dependencies with RISC-V OpenSBI project
-(https://github.com/riscv/opensbi) and fewer burdens to EDK2 build process, the
-implementation of RISC-V EDK2 platform is leveraging platform source code from
+In order to reduce the dependencies with RISC-V OpenSBI project (https://github.com/riscv/opensbi) and avoid duplicating
+code we use it, the implementation of RISC-V EDK2 platform is leveraging platform source code from
 OpenSBI code tree. The "platform.c" under OpenSbiPlatformLib is cloned from
-RISC-V OpenSBI code tree (in EDK2 RiscVPkg) and built based on EDK2 build
-environment.
+[RISC-V OpenSBI code tree](Silicon/RISC-V/ProcessorPkg/Library/RiscVOpensbiLib/opensbi) and built based on edk2
+build environment.
 
 ### PlatformPei
-This is the platform-implementation specific library which is executed in early
-PEI phase for U500 platform initialization.
+This is the platform-implementation specific library which is executed in early PEI phase for U500 platform
+initialization.
 
 ## U540 Platform Libraries and Drivers
 ### RiscVOpensbiPlatformLib
-In order to reduce the dependencies with RISC-V OpenSBI project
-(https://github.com/riscv/opensbi) and fewer burdens to EDK2 build process, the
-implementation of RISC-V EDK2 platform is leveraging platform source code from
+In order to reduce the dependencies with RISC-V OpenSBI project (https://github.com/riscv/opensbi) and fewer
+burdens to EDK2 build process, the implementation of RISC-V EDK2 platform is leveraging platform source code from
 OpenSBI code tree. The "platform.c" under OpenSbiPlatformLib is cloned from
-RISC-V OpenSBI code tree (in EDK2 RiscVPkg) and built based on EDK2 build
-environment.
+[RISC-V OpenSBI code tree](Silicon/RISC-V/ProcessorPkg/Library/RiscVOpensbiLib/opensbi) and built based on edk2
+build environment.
 
 ### PlatformPei
-This is the platform-implementation specific library which is executed in early
-PEI phase for U540 platform initialization.
+This is the platform-implementation specific library which is executed in early PEI phase for U540 platform
+initialization.
 
 ## U5SeriesPkg Platform PCD settings
 
 | **PCD name** |**Usage**|
 |----------------|----------|
+|PcdU5PlatformSystemClock| U5 series platform system clock|
 |PcdNumberofU5Cores| Number of U5 core enabled on U5 series platform|
 |PcdE5MCSupported| Indicates whether the Monitor Core (E5) is supported on U5 series platform|
 |PcdU5UartBase|Platform serial port base address|
+
+
+## Platform Owners
+Chang, Abner <abner.chang@hpe.com>
+Chen, Gilbert <gilbert.chen@hpe.com>
+Schaefer, Daniel <daniel.schaefer@hpe.com>
-- 
2.25.0

Re: [edk2-platforms][PATCH v2 3/3] Platform/U5SeriesPkg: Revise Readme.md

[Daniel Schaefer]

Looks good now, however like in the other patch you also made the lines longer 

again. Please wrap them, as Leif suggested. I'm sure your editor can do that 

for you. 



On 8/27/20 5:43 PM, Abner Chang wrote:
> Update RISC-V U5SeriesPkg Readme.md to align with the latest implementation.
> 
> Signed-off-by: Abner Chang <abner.chang@hpe.com>
> Co-authored-by: Daniel Schaefer <daniel.schaefer@hpe.com>
> 
> Cc: Leif Lindholm <leif@nuviainc.com>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
> ---
>   Platform/SiFive/U5SeriesPkg/Readme.md | 114 ++++++++++++++------------
>   1 file changed, 60 insertions(+), 54 deletions(-)
> 
> diff --git a/Platform/SiFive/U5SeriesPkg/Readme.md b/Platform/SiFive/U5SeriesPkg/Readme.md
> index 4d293e54f6..2ced71fa56 100644
> --- a/Platform/SiFive/U5SeriesPkg/Readme.md
> +++ b/Platform/SiFive/U5SeriesPkg/Readme.md
> @@ -1,61 +1,61 @@
> -# Introduction
> -U5SeriesPkg provides the common EFI library and driver modules for SiFive
> -U5 series core platforms. Currently the supported platforms are Freedom
> -U500 VC707 platform and Freedom U540 HiFive Unleashed platform.
> -
> -Both platforms are built with below common packages,
> -- **U5SeriesPkg**, edk2 platform branch
> -  (Currently is in edk2-platforms/devel-riscvplatforms branch)
> -- **RiscVPlatformPkg**, edk2 master branch
> -  (Currently is in edk2-staging/RISC-V-V2 branch)
> -- **RiscVPkg**, edk2 master branch
> -  (Currently is in edk2-staging/RISC-V-V2 branch)
> +# Introduction of SiFive U5 Series Platforms
> +U5SeriesPkg provides the common EDK2 libraries and drivers for SiFive U5 series platforms. Currently the supported
> +platforms are Freedom U500 VC707 platform and Freedom U540 HiFive Unleashed platform.
> +
> +Both platforms are built with below common edk2 packages under edk2-platforms repository,
> +- [**U5SeriesPkg**](https://github.com/tianocore/edk2-platforms/tree/master/Platform/SiFive/U5SeriesPkg)
> +- [**RiscVPlatformPkg**](https://github.com/tianocore/edk2-platforms/tree/master/Platform/RISC-V/PlatformPkg)
> +- [**RiscVProcessorPkg**](https://github.com/tianocore/edk2-platforms/tree/master/Silicon/RISC-V/ProcessorPkg)
>   
>   ## U500 Platform
> -This is a sample RISC-V EDK2 platform package used agaist SiFive Freedom U500
> +This is a sample platform package used against to SiFive Freedom U500
>   VC707 FPGA Dev Kit, please refer to "SiFive Freedom U500 VC707 FPGA Getting
>   Started Guide" on https://www.sifive.com/documentation.
> +The binary built from Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board can run on U500 VC707 FPGA board.
> +```
> +build -a RISCV64 -t GCC5 -p Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.dsc
> +```
>   
>   ## U540 Platform
> -This is a sample RISC-V EDK2 platform package used against SiFive Freedom U540
> -HiFive Unleashed development board, please refer to "SiFive Freedom U540-C000
> -Manual" on https://www.sifive.com.
> -The binary built from Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/
> -can run on main stream [QEMU](https://git.qemu.org/?p=qemu.git;a=summary)
> -using qemu-system-riscv64 under riscv64-softmmu. Launch the binary with
> +This is a sample platform package used for the SiFive Freedom U540 HiFive Unleashed development board, please refer to "SiFive Freedom U540-C000 Manual" on https://www.sifive.com.
> +The binary built from Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/ can run on both hardware and
> +[QEMU](https://git.qemu.org/?p=qemu.git;a=summary). It is confirmed that version 5.0 of QEMU can boot with this  firmware to EFI shell and Linux userspace.
> +```
> +build -a RISCV64 -t GCC5 -p Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/U540.dsc
> +```
> +For running U540 edk2 binary on QEMU, use qemu-system-riscv64 under riscv64-softmmu to launch the binary with
> +below parameters,
>   
>   ```
> --cpu sifive-u54 -machine sifive_u
> +qemu-system-riscv64 -cpu sifive-u54 -machine sifive_u -bios U540.fd -m 2048 -nographic -smp cpus=5,maxcpus=5
>   ```
>   
> -## Download the sources
> +## Download the Source Code
>   ```
> -git clone https://github.com/tianocore/edk2-staging.git
> -# Checkout RISC-V-V2 branch
> +git clone https://github.com/tianocore/edk2.git
>   git clone https://github.com/tianocore/edk2-platforms.git
> -# Checkout devel-riscvplatforms branch
> -git clone https://github.com/tianocore/edk2-non-osi.git
> +# Below to clone opensbi submodule.
> +git submodule update --init
>   ```
> -
> -## Platform Owners
> -Chang, Abner <abner.chang@hpe.com>
> -Chen, Gilbert <gilbert.chen@hpe.com>
> +Refer to [Readme.md](https://github.com/tianocore/edk2-platforms/blob/master/Platform/RISC-V/PlatformPkg/Readme.md) for building RISC-V platforms.
>   
>   ## Platform Status
> -Currently the binary built from U500Pkg can boot SiFive Freedom U500 VC707
> +**FreedomU500VC707Board**
> +Currently the binary built from U500 edk2 package can boot SiFive Freedom U500 VC707
>   FPGA to EFI shell with console in/out enabled.
>   
> -## Linux Build Instructions
> -You can build the RISC-V platform using below script,
> -`build -a RISCV64  -t GCC5 -p Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.dsc`
> +**FreedomU540HiFiveUnleashedBoard**
> +Currently the binary built from U540 edk2 package can boot SiFive Freedom U540 HiFive Unleashed
> +to EFI shell with console in/out enabled and Linux kernel. Please refer to https://github.com/riscv/riscv-uefi-edk2-docs for booting to Linux kernel.
>   
>   ## Supported Operating Systems
> -Only support to boot to EFI Shell so far.
> +Please refer to https://github.com/riscv/riscv-uefi-edk2-docs.
>   
>   ## Known Issues and Limitations
>   Only RISC-V RV64 is verified on this platform.
>   
>   ## Related Materials
> +- [RISC-V UEFI Documents](https://github.com/riscv/riscv-uefi-edk2-docs)
>   - [RISC-V OpenSbi](https://github.com/riscv/opensbi)
>   - [SiFive U500 VC707 FPGA Getting Started Guide](https://sifive.cdn.prismic.io/sifive%2Fc248fabc-5e44-4412-b1c3-6bb6aac73a2c_sifive-u500-vc707-gettingstarted-v0.2.pdf)
>   - [SiFive Freedom U540-C000 Manual](https://sifive.cdn.prismic.io/sifive%2F834354f0-08e6-423c-bf1f-0cb58ef14061_fu540-c000-v1.0.pdf)
> @@ -63,48 +63,54 @@ Only RISC-V RV64 is verified on this platform.
>   
>   ## U5SeriesPkg Libraries and Drivers
>   ### PeiCoreInfoHobLib
> -This is the library to create RISC-V core characteristics for building up
> -RISC-V related SMBIOS records to support the unified boot loader and OS image.
> +This is the library to create RISC-V core characteristics for building up RISC-V related SMBIOS records to support
> +a single boot loader  or OS image on all RISC-V platforms by discovering RISC-V hart configurations dynamically.
>   This library leverage the silicon libraries provided in Silicon/SiFive.
>   
>   ### RiscVPlatformTimerLib
> -This is common U5 series platform timer library which has the
> -platform-specific timer implementation.
> +This is common U5 series platform timer library which has the platform-specific timer implementation.
> +
> +### SerialLib
> +This is common U5 series platform serial port library.
>   
>   ### TimerDxe
> -This is U5 series platform timer DXE driver whcih has the platform-specific
> -timer implementation.
> +This is common U5 series platform timer DXE driver which has the platform-specific timer implementation.
>   
>   ## U500 Platform Libraries and Drivers
>   ### RiscVOpensbiPlatformLib
> -In order to reduce the dependencies with RISC-V OpenSBI project
> -(https://github.com/riscv/opensbi) and fewer burdens to EDK2 build process, the
> -implementation of RISC-V EDK2 platform is leveraging platform source code from
> +In order to reduce the dependencies with RISC-V OpenSBI project (https://github.com/riscv/opensbi) and avoid duplicating
> +code we use it, the implementation of RISC-V EDK2 platform is leveraging platform source code from
>   OpenSBI code tree. The "platform.c" under OpenSbiPlatformLib is cloned from
> -RISC-V OpenSBI code tree (in EDK2 RiscVPkg) and built based on EDK2 build
> -environment.
> +[RISC-V OpenSBI code tree](Silicon/RISC-V/ProcessorPkg/Library/RiscVOpensbiLib/opensbi) and built based on edk2
> +build environment.
>   
>   ### PlatformPei
> -This is the platform-implementation specific library which is executed in early
> -PEI phase for U500 platform initialization.
> +This is the platform-implementation specific library which is executed in early PEI phase for U500 platform
> +initialization.
>   
>   ## U540 Platform Libraries and Drivers
>   ### RiscVOpensbiPlatformLib
> -In order to reduce the dependencies with RISC-V OpenSBI project
> -(https://github.com/riscv/opensbi) and fewer burdens to EDK2 build process, the
> -implementation of RISC-V EDK2 platform is leveraging platform source code from
> +In order to reduce the dependencies with RISC-V OpenSBI project (https://github.com/riscv/opensbi) and fewer
> +burdens to EDK2 build process, the implementation of RISC-V EDK2 platform is leveraging platform source code from
>   OpenSBI code tree. The "platform.c" under OpenSbiPlatformLib is cloned from
> -RISC-V OpenSBI code tree (in EDK2 RiscVPkg) and built based on EDK2 build
> -environment.
> +[RISC-V OpenSBI code tree](Silicon/RISC-V/ProcessorPkg/Library/RiscVOpensbiLib/opensbi) and built based on edk2
> +build environment.
>   
>   ### PlatformPei
> -This is the platform-implementation specific library which is executed in early
> -PEI phase for U540 platform initialization.
> +This is the platform-implementation specific library which is executed in early PEI phase for U540 platform
> +initialization.
>   
>   ## U5SeriesPkg Platform PCD settings
>   
>   | **PCD name** |**Usage**|
>   |----------------|----------|
> +|PcdU5PlatformSystemClock| U5 series platform system clock|
>   |PcdNumberofU5Cores| Number of U5 core enabled on U5 series platform|
>   |PcdE5MCSupported| Indicates whether the Monitor Core (E5) is supported on U5 series platform|
>   |PcdU5UartBase|Platform serial port base address|
> +
> +
> +## Platform Owners
> +Chang, Abner <abner.chang@hpe.com>
> +Chen, Gilbert <gilbert.chen@hpe.com>
> +Schaefer, Daniel <daniel.schaefer@hpe.com>
> 

Re: [edk2-platforms][PATCH v2 3/3] Platform/U5SeriesPkg: Revise Readme.md

[Daniel Schaefer]

On 8/28/20 11:25 AM, Daniel Schaefer wrote:
> Looks good now, however like in the other patch you also made the lines longer
> again. Please wrap them, as Leif suggested. I'm sure your editor can do that
> for you.

Since that won't change the content meaningfully,
Reviewed-By: Daniel Schaefer <daniel.schaefer@hpe.com>

> 
> 
> On 8/27/20 5:43 PM, Abner Chang wrote:
>> Update RISC-V U5SeriesPkg Readme.md to align with the latest implementation.
>>
>> Signed-off-by: Abner Chang <abner.chang@hpe.com>
>> Co-authored-by: Daniel Schaefer <daniel.schaefer@hpe.com>
>>
>> Cc: Leif Lindholm <leif@nuviainc.com>
>> Cc: Michael D Kinney <michael.d.kinney@intel.com>
>> Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
>> ---
>>   Platform/SiFive/U5SeriesPkg/Readme.md | 114 ++++++++++++++------------
>>   1 file changed, 60 insertions(+), 54 deletions(-)
>>
>> diff --git a/Platform/SiFive/U5SeriesPkg/Readme.md b/Platform/SiFive/U5SeriesPkg/Readme.md
>> index 4d293e54f6..2ced71fa56 100644
>> --- a/Platform/SiFive/U5SeriesPkg/Readme.md
>> +++ b/Platform/SiFive/U5SeriesPkg/Readme.md
>> @@ -1,61 +1,61 @@
>> -# Introduction
>> -U5SeriesPkg provides the common EFI library and driver modules for SiFive
>> -U5 series core platforms. Currently the supported platforms are Freedom
>> -U500 VC707 platform and Freedom U540 HiFive Unleashed platform.
>> -
>> -Both platforms are built with below common packages,
>> -- **U5SeriesPkg**, edk2 platform branch
>> -  (Currently is in edk2-platforms/devel-riscvplatforms branch)
>> -- **RiscVPlatformPkg**, edk2 master branch
>> -  (Currently is in edk2-staging/RISC-V-V2 branch)
>> -- **RiscVPkg**, edk2 master branch
>> -  (Currently is in edk2-staging/RISC-V-V2 branch)
>> +# Introduction of SiFive U5 Series Platforms
>> +U5SeriesPkg provides the common EDK2 libraries and drivers for SiFive U5 series platforms. Currently the supported
>> +platforms are Freedom U500 VC707 platform and Freedom U540 HiFive Unleashed platform.
>> +
>> +Both platforms are built with below common edk2 packages under edk2-platforms repository,
>> +- [**U5SeriesPkg**](https://github.com/tianocore/edk2-platforms/tree/master/Platform/SiFive/U5SeriesPkg)
>> +- [**RiscVPlatformPkg**](https://github.com/tianocore/edk2-platforms/tree/master/Platform/RISC-V/PlatformPkg)
>> +- [**RiscVProcessorPkg**](https://github.com/tianocore/edk2-platforms/tree/master/Silicon/RISC-V/ProcessorPkg)
>>   ## U500 Platform
>> -This is a sample RISC-V EDK2 platform package used agaist SiFive Freedom U500
>> +This is a sample platform package used against to SiFive Freedom U500
>>   VC707 FPGA Dev Kit, please refer to "SiFive Freedom U500 VC707 FPGA Getting
>>   Started Guide" on https://www.sifive.com/documentation.
>> +The binary built from Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board can run on U500 VC707 FPGA board.
>> +```
>> +build -a RISCV64 -t GCC5 -p Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.dsc
>> +```
>>   ## U540 Platform
>> -This is a sample RISC-V EDK2 platform package used against SiFive Freedom U540
>> -HiFive Unleashed development board, please refer to "SiFive Freedom U540-C000
>> -Manual" on https://www.sifive.com.
>> -The binary built from Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/
>> -can run on main stream [QEMU](https://git.qemu.org/?p=qemu.git;a=summary)
>> -using qemu-system-riscv64 under riscv64-softmmu. Launch the binary with
>> +This is a sample platform package used for the SiFive Freedom U540 HiFive Unleashed development board, please refer to "SiFive Freedom U540-C000 Manual" on https://www.sifive.com.
>> +The binary built from Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/ can run on both hardware and
>> +[QEMU](https://git.qemu.org/?p=qemu.git;a=summary). It is confirmed that version 5.0 of QEMU can boot with this  firmware to EFI shell and Linux userspace.
>> +```
>> +build -a RISCV64 -t GCC5 -p Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/U540.dsc
>> +```
>> +For running U540 edk2 binary on QEMU, use qemu-system-riscv64 under riscv64-softmmu to launch the binary with
>> +below parameters,
>>   ```
>> --cpu sifive-u54 -machine sifive_u
>> +qemu-system-riscv64 -cpu sifive-u54 -machine sifive_u -bios U540.fd -m 2048 -nographic -smp cpus=5,maxcpus=5
>>   ```
>> -## Download the sources
>> +## Download the Source Code
>>   ```
>> -git clone https://github.com/tianocore/edk2-staging.git
>> -# Checkout RISC-V-V2 branch
>> +git clone https://github.com/tianocore/edk2.git
>>   git clone https://github.com/tianocore/edk2-platforms.git
>> -# Checkout devel-riscvplatforms branch
>> -git clone https://github.com/tianocore/edk2-non-osi.git
>> +# Below to clone opensbi submodule.
>> +git submodule update --init
>>   ```
>> -
>> -## Platform Owners
>> -Chang, Abner <abner.chang@hpe.com>
>> -Chen, Gilbert <gilbert.chen@hpe.com>
>> +Refer to [Readme.md](https://github.com/tianocore/edk2-platforms/blob/master/Platform/RISC-V/PlatformPkg/Readme.md) for building RISC-V platforms.
>>   ## Platform Status
>> -Currently the binary built from U500Pkg can boot SiFive Freedom U500 VC707
>> +**FreedomU500VC707Board**
>> +Currently the binary built from U500 edk2 package can boot SiFive Freedom U500 VC707
>>   FPGA to EFI shell with console in/out enabled.
>> -## Linux Build Instructions
>> -You can build the RISC-V platform using below script,
>> -`build -a RISCV64  -t GCC5 -p Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.dsc`
>> +**FreedomU540HiFiveUnleashedBoard**
>> +Currently the binary built from U540 edk2 package can boot SiFive Freedom U540 HiFive Unleashed
>> +to EFI shell with console in/out enabled and Linux kernel. Please refer to https://github.com/riscv/riscv-uefi-edk2-docs for booting to Linux kernel.
>>   ## Supported Operating Systems
>> -Only support to boot to EFI Shell so far.
>> +Please refer to https://github.com/riscv/riscv-uefi-edk2-docs.
>>   ## Known Issues and Limitations
>>   Only RISC-V RV64 is verified on this platform.
>>   ## Related Materials
>> +- [RISC-V UEFI Documents](https://github.com/riscv/riscv-uefi-edk2-docs)
>>   - [RISC-V OpenSbi](https://github.com/riscv/opensbi)
>>   - [SiFive U500 VC707 FPGA Getting Started Guide](https://sifive.cdn.prismic.io/sifive%2Fc248fabc-5e44-4412-b1c3-6bb6aac73a2c_sifive-u500-vc707-gettingstarted-v0.2.pdf)
>>   - [SiFive Freedom U540-C000 Manual](https://sifive.cdn.prismic.io/sifive%2F834354f0-08e6-423c-bf1f-0cb58ef14061_fu540-c000-v1.0.pdf)
>> @@ -63,48 +63,54 @@ Only RISC-V RV64 is verified on this platform.
>>   ## U5SeriesPkg Libraries and Drivers
>>   ### PeiCoreInfoHobLib
>> -This is the library to create RISC-V core characteristics for building up
>> -RISC-V related SMBIOS records to support the unified boot loader and OS image.
>> +This is the library to create RISC-V core characteristics for building up RISC-V related SMBIOS records to support
>> +a single boot loader  or OS image on all RISC-V platforms by discovering RISC-V hart configurations dynamically.
>>   This library leverage the silicon libraries provided in Silicon/SiFive.
>>   ### RiscVPlatformTimerLib
>> -This is common U5 series platform timer library which has the
>> -platform-specific timer implementation.
>> +This is common U5 series platform timer library which has the platform-specific timer implementation.
>> +
>> +### SerialLib
>> +This is common U5 series platform serial port library.
>>   ### TimerDxe
>> -This is U5 series platform timer DXE driver whcih has the platform-specific
>> -timer implementation.
>> +This is common U5 series platform timer DXE driver which has the platform-specific timer implementation.
>>   ## U500 Platform Libraries and Drivers
>>   ### RiscVOpensbiPlatformLib
>> -In order to reduce the dependencies with RISC-V OpenSBI project
>> -(https://github.com/riscv/opensbi) and fewer burdens to EDK2 build process, the
>> -implementation of RISC-V EDK2 platform is leveraging platform source code from
>> +In order to reduce the dependencies with RISC-V OpenSBI project (https://github.com/riscv/opensbi) and avoid duplicating
>> +code we use it, the implementation of RISC-V EDK2 platform is leveraging platform source code from
>>   OpenSBI code tree. The "platform.c" under OpenSbiPlatformLib is cloned from
>> -RISC-V OpenSBI code tree (in EDK2 RiscVPkg) and built based on EDK2 build
>> -environment.
>> +[RISC-V OpenSBI code tree](Silicon/RISC-V/ProcessorPkg/Library/RiscVOpensbiLib/opensbi) and built based on edk2
>> +build environment.
>>   ### PlatformPei
>> -This is the platform-implementation specific library which is executed in early
>> -PEI phase for U500 platform initialization.
>> +This is the platform-implementation specific library which is executed in early PEI phase for U500 platform
>> +initialization.
>>   ## U540 Platform Libraries and Drivers
>>   ### RiscVOpensbiPlatformLib
>> -In order to reduce the dependencies with RISC-V OpenSBI project
>> -(https://github.com/riscv/opensbi) and fewer burdens to EDK2 build process, the
>> -implementation of RISC-V EDK2 platform is leveraging platform source code from
>> +In order to reduce the dependencies with RISC-V OpenSBI project (https://github.com/riscv/opensbi) and fewer
>> +burdens to EDK2 build process, the implementation of RISC-V EDK2 platform is leveraging platform source code from
>>   OpenSBI code tree. The "platform.c" under OpenSbiPlatformLib is cloned from
>> -RISC-V OpenSBI code tree (in EDK2 RiscVPkg) and built based on EDK2 build
>> -environment.
>> +[RISC-V OpenSBI code tree](Silicon/RISC-V/ProcessorPkg/Library/RiscVOpensbiLib/opensbi) and built based on edk2
>> +build environment.
>>   ### PlatformPei
>> -This is the platform-implementation specific library which is executed in early
>> -PEI phase for U540 platform initialization.
>> +This is the platform-implementation specific library which is executed in early PEI phase for U540 platform
>> +initialization.
>>   ## U5SeriesPkg Platform PCD settings
>>   | **PCD name** |**Usage**|
>>   |----------------|----------|
>> +|PcdU5PlatformSystemClock| U5 series platform system clock|
>>   |PcdNumberofU5Cores| Number of U5 core enabled on U5 series platform|
>>   |PcdE5MCSupported| Indicates whether the Monitor Core (E5) is supported on U5 series platform|
>>   |PcdU5UartBase|Platform serial port base address|
>> +
>> +
>> +## Platform Owners
>> +Chang, Abner <abner.chang@hpe.com>
>> +Chen, Gilbert <gilbert.chen@hpe.com>
>> +Schaefer, Daniel <daniel.schaefer@hpe.com>
>>