public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
* [PATCH] OvmfPkg/README: HTTPS Boot: describe host-side TLS cipher suites forwarding
@ 2020-09-07 16:18 Laszlo Ersek
  2020-09-08  3:40 ` Gary Lin
  2020-09-09 16:21 ` Philippe Mathieu-Daudé
  0 siblings, 2 replies; 9+ messages in thread
From: Laszlo Ersek @ 2020-09-07 16:18 UTC (permalink / raw)
  To: edk2-devel-groups-io
  Cc: Ard Biesheuvel, Gary Lin, Jordan Justen,
	Philippe Mathieu-Daudé

In QEMU commit range 4abf70a661a5..69699f3055a5, Phil implemented a QEMU
facility for exposing the host-side TLS cipher suite configuration to
OVMF. The purpose is to control the permitted ciphers in the guest's UEFI
HTTPS boot. This complements the forwarding of the host-side crypto policy
from the host to the guest -- the other facet was the set of CA
certificates (for which p11-kit patches had been upstreamed, on the host
side).

Mention the new command line options in "OvmfPkg/README".

Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2852
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
---
 OvmfPkg/README | 24 ++++++++++++--------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/OvmfPkg/README b/OvmfPkg/README
index 3dd28474ead4..2009d9d29796 100644
--- a/OvmfPkg/README
+++ b/OvmfPkg/README
@@ -294,67 +294,73 @@ and encrypted connection.
 
   You can also append a certificate to the existing list with the following
   command:
 
   efisiglist -i <old certdb> -a <cert file> -o <new certdb>
 
   NOTE: You may need the patch to make efisiglist generate the correct header.
   (https://github.com/rhboot/pesign/pull/40)
 
 * Besides the trusted certificates, it's also possible to configure the trusted
   cipher suites for HTTPS through another fw_cfg entry: etc/edk2/https/ciphers.
 
-  -fw_cfg name=etc/edk2/https/ciphers,file=<cipher suites>
-
   OVMF expects a binary UINT16 array which comprises the cipher suites HEX
   IDs(*4). If the cipher suite list is given, OVMF will choose the cipher
   suite from the intersection of the given list and the built-in cipher
   suites. Otherwise, OVMF just chooses whatever proper cipher suites from the
   built-in ones.
 
-  While the tool(*5) to create the cipher suite array is still under
-  development, the array can be generated with the following script:
+  Using QEMU 5.1 or later, QEMU can expose the ordered list of permitted TLS
+  cipher suites from the host side to OVMF:
+
+  -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \
+  -fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0
+
+  (Refer to the QEMU manual and to
+  <https://gnutls.org/manual/html_node/Priority-Strings.html> for more
+  information on the "priority" property.)
+
+  Using QEMU 5.0 or earlier, the array has to be passed from a file:
+
+  -fw_cfg name=etc/edk2/https/ciphers,file=<cipher suites>
+
+  whose contents can be generated with the following script, for example:
 
   export LC_ALL=C
   openssl ciphers -V \
   | sed -r -n \
      -e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \
   | xargs -r -- printf -- '%b' > ciphers.bin
 
   This script creates ciphers.bin that contains all the cipher suite IDs
   supported by openssl according to the local host configuration.
 
   You may want to enable only a limited set of cipher suites. Then, you
   should check the validity of your list first:
 
   openssl ciphers -V <cipher list>
 
   If all the cipher suites in your list map to the proper HEX IDs, go ahead
   to modify the script and execute it:
 
   export LC_ALL=C
   openssl ciphers -V <cipher list> \
   | sed -r -n \
      -e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \
   | xargs -r -- printf -- '%b' > ciphers.bin
 
-* In the future (after release 2.12), QEMU should populate both above fw_cfg
-  files automatically from the local host configuration, and enable the user
-  to override either with dedicated options or properties.
-
 (*1) See "31.4.1 Signature Database" in UEFI specification 2.7 errata A.
 (*2) p11-kit: https://github.com/p11-glue/p11-kit/
 (*3) efisiglist: https://github.com/rhboot/pesign/blob/master/src/efisiglist.c
 (*4) https://wiki.mozilla.org/Security/Server_Side_TLS#Cipher_names_correspondence_table
-(*5) update-crypto-policies: https://gitlab.com/redhat-crypto/fedora-crypto-policies
 
 === OVMF Flash Layout ===
 
 Like all current IA32/X64 system designs, OVMF's firmware device (rom/flash)
 appears in QEMU's physical address space just below 4GB (0x100000000).
 
 OVMF supports building a 1MB, 2MB or 4MB flash image (see the DSC files for the
 FD_SIZE_1MB, FD_SIZE_2MB, FD_SIZE_4MB build defines). The base address for the
 1MB image in QEMU physical memory is 0xfff00000. The base address for the 2MB
 image is 0xffe00000. The base address for the 4MB image is 0xffc00000.
 
 Using the 1MB or 2MB image, the layout of the firmware device in memory looks
-- 
2.19.1.3.g30247aa5d201


^ permalink raw reply related	[flat|nested] 9+ messages in thread
* [PATCH] OvmfPkg/README: HTTPS Boot: describe host-side TLS cipher suites forwarding
@ 2020-09-22  9:18 Laszlo Ersek
  2020-09-22  9:33 ` Philippe Mathieu-Daudé
  0 siblings, 1 reply; 9+ messages in thread
From: Laszlo Ersek @ 2020-09-22  9:18 UTC (permalink / raw)
  To: edk2-devel-groups-io
  Cc: Ard Biesheuvel, Gary Lin, Jordan Justen,
	Philippe Mathieu-Daudé

In QEMU commit range 4abf70a661a5..69699f3055a5 (later fixed up in QEMU
commit 4318432ccd3f), Phil implemented a QEMU facility for exposing the
host-side TLS cipher suite configuration to OVMF. The purpose is to
control the permitted ciphers in the guest's UEFI HTTPS boot. This
complements the forwarding of the host-side crypto policy from the host to
the guest -- the other facet was the set of CA certificates (for which
p11-kit patches had been upstreamed, on the host side).

Mention the new command line options in "OvmfPkg/README".

Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2852
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---

Notes:
    v2:
    
    - Move the feature boundary from between QEMU 5.0 and 5.1 to 5.1<->5.2
      (the necessary upstream QEMU commit 4318432ccd3f will only be released
      as part of 5.2). Update both the README contents and the commit
      message.
    
    - Indent the "Using QEMU <version>" list entries, and prefix them with a
      hyphen, for better separation. [Phil]
    
    - Pick up Gary's R-b.
    
    - Pick up Phil's R-b.
    
    - Do not pick up Phil's T-b.
    
    Repo:   https://pagure.io/lersek/edk2.git
    Branch: tianocore_2852_v2

 OvmfPkg/README | 24 ++++++++++++--------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/OvmfPkg/README b/OvmfPkg/README
index 3dd28474ead4..70f0c4152686 100644
--- a/OvmfPkg/README
+++ b/OvmfPkg/README
@@ -294,67 +294,73 @@ and encrypted connection.
 
   You can also append a certificate to the existing list with the following
   command:
 
   efisiglist -i <old certdb> -a <cert file> -o <new certdb>
 
   NOTE: You may need the patch to make efisiglist generate the correct header.
   (https://github.com/rhboot/pesign/pull/40)
 
 * Besides the trusted certificates, it's also possible to configure the trusted
   cipher suites for HTTPS through another fw_cfg entry: etc/edk2/https/ciphers.
 
-  -fw_cfg name=etc/edk2/https/ciphers,file=<cipher suites>
-
   OVMF expects a binary UINT16 array which comprises the cipher suites HEX
   IDs(*4). If the cipher suite list is given, OVMF will choose the cipher
   suite from the intersection of the given list and the built-in cipher
   suites. Otherwise, OVMF just chooses whatever proper cipher suites from the
   built-in ones.
 
-  While the tool(*5) to create the cipher suite array is still under
-  development, the array can be generated with the following script:
+  - Using QEMU 5.2 or later, QEMU can expose the ordered list of permitted TLS
+    cipher suites from the host side to OVMF:
+
+  -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \
+  -fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0
+
+  (Refer to the QEMU manual and to
+  <https://gnutls.org/manual/html_node/Priority-Strings.html> for more
+  information on the "priority" property.)
+
+  - Using QEMU 5.1 or earlier, the array has to be passed from a file:
+
+  -fw_cfg name=etc/edk2/https/ciphers,file=<cipher suites>
+
+  whose contents can be generated with the following script, for example:
 
   export LC_ALL=C
   openssl ciphers -V \
   | sed -r -n \
      -e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \
   | xargs -r -- printf -- '%b' > ciphers.bin
 
   This script creates ciphers.bin that contains all the cipher suite IDs
   supported by openssl according to the local host configuration.
 
   You may want to enable only a limited set of cipher suites. Then, you
   should check the validity of your list first:
 
   openssl ciphers -V <cipher list>
 
   If all the cipher suites in your list map to the proper HEX IDs, go ahead
   to modify the script and execute it:
 
   export LC_ALL=C
   openssl ciphers -V <cipher list> \
   | sed -r -n \
      -e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \
   | xargs -r -- printf -- '%b' > ciphers.bin
 
-* In the future (after release 2.12), QEMU should populate both above fw_cfg
-  files automatically from the local host configuration, and enable the user
-  to override either with dedicated options or properties.
-
 (*1) See "31.4.1 Signature Database" in UEFI specification 2.7 errata A.
 (*2) p11-kit: https://github.com/p11-glue/p11-kit/
 (*3) efisiglist: https://github.com/rhboot/pesign/blob/master/src/efisiglist.c
 (*4) https://wiki.mozilla.org/Security/Server_Side_TLS#Cipher_names_correspondence_table
-(*5) update-crypto-policies: https://gitlab.com/redhat-crypto/fedora-crypto-policies
 
 === OVMF Flash Layout ===
 
 Like all current IA32/X64 system designs, OVMF's firmware device (rom/flash)
 appears in QEMU's physical address space just below 4GB (0x100000000).
 
 OVMF supports building a 1MB, 2MB or 4MB flash image (see the DSC files for the
 FD_SIZE_1MB, FD_SIZE_2MB, FD_SIZE_4MB build defines). The base address for the
 1MB image in QEMU physical memory is 0xfff00000. The base address for the 2MB
 image is 0xffe00000. The base address for the 4MB image is 0xffc00000.
 
 Using the 1MB or 2MB image, the layout of the firmware device in memory looks
-- 
2.19.1.3.g30247aa5d201


^ permalink raw reply related	[flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-09-22  9:33 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-09-07 16:18 [PATCH] OvmfPkg/README: HTTPS Boot: describe host-side TLS cipher suites forwarding Laszlo Ersek
2020-09-08  3:40 ` Gary Lin
2020-09-08 22:35   ` [edk2-devel] " Laszlo Ersek
2020-09-09 16:21 ` Philippe Mathieu-Daudé
2020-09-10  6:02   ` Laszlo Ersek
2020-09-15 17:09     ` Philippe Mathieu-Daudé
2020-09-16  7:35       ` Laszlo Ersek
  -- strict thread matches above, loose matches on Subject: below --
2020-09-22  9:18 Laszlo Ersek
2020-09-22  9:33 ` Philippe Mathieu-Daudé

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox