* [PATCH v5 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
@ 2020-10-02 21:13 ` Sami Mujawar
2020-10-05 10:58 ` Ard Biesheuvel
2020-10-02 21:13 ` [PATCH v5 02/15] ArmVirtPkg: Add Kvmtool RTC Fdt Client Library Sami Mujawar
` (14 subsequent siblings)
15 siblings, 1 reply; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:13 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, ray.ni, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Ben.Adderson, nd
Some virtual machine managers like Kvmtool emulate the MC146818
RTC controller in the MMIO space so that architectures that do
not support I/O Mapped I/O can use the RTC. This patch adds MMIO
support to the RTC controller driver.
The PCD PcdRtcUseMmio has been added to select I/O or MMIO support.
If PcdRtcUseMmio is:
TRUE - Indicates the RTC port registers are in MMIO space.
FALSE - Indicates the RTC port registers are in I/O space.
Default is I/O space.
Additionally two new PCDs PcdRtcIndexRegister64 and
PcdRtcTargetRegister64 have been introduced to provide the base
address for the RTC registers in the MMIO space.
When MMIO support is selected (PcdRtcUseMmio == TRUE) the driver
converts the pointers to the RTC MMIO registers so that the
RTC registers are accessible post ExitBootServices.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
---
Notes:
v5:
- Updated based on review comments. [Sami]
- Drop the unnecessary whitespace and header changes to [Ard]
PcRtc.h, and the whitespace changes to PcRtcEntry.c
Ref: https://edk2.groups.io/g/devel/topic/75354083
v4:
- Updated based on review comments. [Sami]
- Use static helper functions instead of function pointers. [Ard]
Ref: https://edk2.groups.io/g/devel/topic/75081468
v3:
- Make PcdRtcUseMmio a feature PCD. [Sami]
- Read the RTC MMIO base address from the DT. [Andre]
- Introduce PCDs for RTC Index and Target register base [Sami]
address in the MMIO space.
- Move RTC MMIO region mapping code to a separate platform [Sami]
specific library. This library also reads the base addresses
for the RTC from DT and configures the RTC Index and Target
register PCDs.
Ref: https://edk2.groups.io/g/devel/topic/74200905#60307
v2:
- Code review comments incorporated. [Sami]
v1:
- Add support to read/write from RTC registers using [Sami]
MMIO access
- Use wrapper functions for RtcRead/Write accessors [Leif]
Ref: https://edk2.groups.io/g/devel/topic/30915281#30695
PcAtChipsetPkg/PcAtChipsetPkg.dec | 16 +++
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c | 120 ++++++++++++++++++--
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c | 54 ++++++++-
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf | 8 ++
4 files changed, 186 insertions(+), 12 deletions(-)
diff --git a/PcAtChipsetPkg/PcAtChipsetPkg.dec b/PcAtChipsetPkg/PcAtChipsetPkg.dec
index 88de5cceea593176c3a2425a5963b66b789f2b9e..ed2d95550b8d153995b30cdc290cf3bb905e211b 100644
--- a/PcAtChipsetPkg/PcAtChipsetPkg.dec
+++ b/PcAtChipsetPkg/PcAtChipsetPkg.dec
@@ -6,6 +6,7 @@
#
# Copyright (c) 2009 - 2019, Intel Corporation. All rights reserved.<BR>
# Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -41,6 +42,13 @@ [PcdsFeatureFlag]
# @Prompt Configure HPET to use MSI.
gPcAtChipsetPkgTokenSpaceGuid.PcdHpetMsiEnable|TRUE|BOOLEAN|0x00001000
+ ## Indicates the RTC port registers are in MMIO space, or in I/O space.
+ # Default is I/O space.<BR><BR>
+ # TRUE - RTC port registers are in MMIO space.<BR>
+ # FALSE - RTC port registers are in I/O space.<BR>
+ # @Prompt RTC port registers use MMIO.
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|FALSE|BOOLEAN|0x00000021
+
[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
## This PCD specifies the base address of the HPET timer.
# @Prompt HPET base address.
@@ -68,6 +76,14 @@ [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
# @Expression 0x80000001 | gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear < gPcAtChipsetPkgTokenSpaceGuid.PcdMinimalValidYear + 100
gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear|2097|UINT16|0x0000000E
+ ## Specifies RTC Index Register address in MMIO space.
+ # @Prompt RTC Index Register address
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0|UINT64|0x00000022
+
+ ## Specifies RTC Target Register address in MMIO space.
+ # @Prompt RTC Target Register address
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0|UINT64|0x00000023
+
[PcdsFixedAtBuild, PcdsPatchableInModule]
## Defines the ACPI register set base address.
# The invalid 0xFFFF is as its default value. It must be configured to the real value.
diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
index 52af17941786ef81c3911512ee64551724e67209..64f36f6fbbd1b03967bd1a1290d108d5b0f294fa 100644
--- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
+++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
@@ -3,6 +3,7 @@
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
+Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -10,6 +11,9 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#include "PcRtc.h"
+extern UINTN mRtcIndexRegister;
+extern UINTN mRtcTargetRegister;
+
//
// Days of month.
//
@@ -54,38 +58,132 @@ IsWithinOneDay (
);
/**
+ Read RTC content through its registers using IO access.
+
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+
+ @return The data of UINT8 type read from RTC.
+**/
+STATIC
+UINT8
+IoRtcRead (
+ IN UINTN Address
+ )
+{
+ IoWrite8 (
+ PcdGet8 (PcdRtcIndexRegister),
+ (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80))
+ );
+ return IoRead8 (PcdGet8 (PcdRtcTargetRegister));
+}
+
+/**
+ Write RTC through its registers using IO access.
+
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+ @param Data The content you want to write into RTC.
+
+**/
+STATIC
+VOID
+IoRtcWrite (
+ IN UINTN Address,
+ IN UINT8 Data
+ )
+{
+ IoWrite8 (
+ PcdGet8 (PcdRtcIndexRegister),
+ (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80))
+ );
+ IoWrite8 (PcdGet8 (PcdRtcTargetRegister), Data);
+}
+
+/**
+ Read RTC content through its registers using MMIO access.
+
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+
+ @return The data of UINT8 type read from RTC.
+**/
+STATIC
+UINT8
+MmioRtcRead (
+ IN UINTN Address
+ )
+{
+ MmioWrite8 (
+ mRtcIndexRegister,
+ (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
+ );
+ return MmioRead8 (mRtcTargetRegister);
+}
+
+/**
+ Write RTC through its registers using MMIO access.
+
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+ @param Data The content you want to write into RTC.
+
+**/
+STATIC
+VOID
+MmioRtcWrite (
+ IN UINTN Address,
+ IN UINT8 Data
+ )
+{
+ MmioWrite8 (
+ mRtcIndexRegister,
+ (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
+ );
+ MmioWrite8 (mRtcTargetRegister, Data);
+}
+
+/**
Read RTC content through its registers.
- @param Address Address offset of RTC. It is recommended to use macros such as
- RTC_ADDRESS_SECONDS.
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
@return The data of UINT8 type read from RTC.
**/
+STATIC
UINT8
RtcRead (
- IN UINT8 Address
+ IN UINTN Address
)
{
- IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8) (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
- return IoRead8 (PcdGet8 (PcdRtcTargetRegister));
+ if (FeaturePcdGet (PcdRtcUseMmio)) {
+ return MmioRtcRead (Address);
+ }
+
+ return IoRtcRead (Address);
}
/**
Write RTC through its registers.
- @param Address Address offset of RTC. It is recommended to use macros such as
- RTC_ADDRESS_SECONDS.
- @param Data The content you want to write into RTC.
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+ @param Data The content you want to write into RTC.
**/
+STATIC
VOID
RtcWrite (
- IN UINT8 Address,
+ IN UINTN Address,
IN UINT8 Data
)
{
- IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8) (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
- IoWrite8 (PcdGet8 (PcdRtcTargetRegister), Data);
+ if (FeaturePcdGet (PcdRtcUseMmio)) {
+ MmioRtcWrite (Address, Data);
+ } else {
+ IoRtcWrite (Address, Data);
+ }
}
/**
diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
index ccda6331373bfe4069b0a59495b5e5cc731c8fc8..606b88adafb7ef5d81e32e212794a5ccae9d0443 100644
--- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
+++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
@@ -2,16 +2,23 @@
Provides Set/Get time operations.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
+#include <Library/DxeServicesTableLib.h>
#include "PcRtc.h"
PC_RTC_MODULE_GLOBALS mModuleGlobal;
EFI_HANDLE mHandle = NULL;
+STATIC EFI_EVENT mVirtualAddrChangeEvent;
+
+UINTN mRtcIndexRegister;
+UINTN mRtcTargetRegister;
+
/**
Returns the current time and date information, and the time-keeping capabilities
of the hardware platform.
@@ -106,6 +113,30 @@ PcRtcEfiSetWakeupTime (
}
/**
+ Fixup internal data so that EFI can be called in virtual mode.
+ Call the passed in Child Notify event and convert any pointers in
+ lib to virtual mode.
+
+ @param[in] Event The Event that is being processed
+ @param[in] Context Event Context
+**/
+VOID
+EFIAPI
+LibRtcVirtualNotifyEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ // Only needed if you are going to support the OS calling RTC functions in
+ // virtual mode. You will need to call EfiConvertPointer (). To convert any
+ // stored physical addresses to virtual address. After the OS transitions to
+ // calling in virtual mode, all future runtime calls will be made in virtual
+ // mode.
+ EfiConvertPointer (0x0, (VOID**)&mRtcIndexRegister);
+ EfiConvertPointer (0x0, (VOID**)&mRtcTargetRegister);
+}
+
+/**
The user Entry Point for PcRTC module.
This is the entry point for PcRTC module. It installs the UEFI runtime service
@@ -131,6 +162,11 @@ InitializePcRtc (
EfiInitializeLock (&mModuleGlobal.RtcLock, TPL_CALLBACK);
mModuleGlobal.CenturyRtcAddress = GetCenturyRtcAddress ();
+ if (FeaturePcdGet (PcdRtcUseMmio)) {
+ mRtcIndexRegister = (UINTN)PcdGet64 (PcdRtcIndexRegister64);
+ mRtcTargetRegister = (UINTN)PcdGet64 (PcdRtcTargetRegister64);
+ }
+
Status = PcRtcInit (&mModuleGlobal);
ASSERT_EFI_ERROR (Status);
@@ -165,7 +201,23 @@ InitializePcRtc (
NULL,
NULL
);
- ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+ }
+
+ if (FeaturePcdGet (PcdRtcUseMmio)) {
+ // Register for the virtual address change event
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ LibRtcVirtualNotifyEvent,
+ NULL,
+ &gEfiEventVirtualAddressChangeGuid,
+ &mVirtualAddrChangeEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+ }
return Status;
}
diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
index c73ee98105e510f9e4e23c1a6c1e5c505325d2c9..0d8eca28b65954b073a72fc4fe5ad6247320e79d 100644
--- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
+++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
@@ -6,6 +6,7 @@
#
# Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
# Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -61,6 +62,11 @@ [Guids]
## SOMETIMES_CONSUMES ## SystemTable
gEfiAcpiTableGuid
+ gEfiEventVirtualAddressChangeGuid
+
+[FeaturePcd]
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio ## CONSUMES
+
[FixedPcd]
gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterA ## CONSUMES
gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterB ## CONSUMES
@@ -72,6 +78,8 @@ [Pcd]
gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear ## CONSUMES
gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister ## CONSUMES
gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister ## CONSUMES
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64 ## CONSUMES
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64 ## CONSUMES
[Depex]
gEfiVariableArchProtocolGuid AND gEfiVariableWriteArchProtocolGuid
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [PATCH v5 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver
2020-10-02 21:13 ` [PATCH v5 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver Sami Mujawar
@ 2020-10-05 10:58 ` Ard Biesheuvel
2020-10-06 10:16 ` Laszlo Ersek
0 siblings, 1 reply; 24+ messages in thread
From: Ard Biesheuvel @ 2020-10-05 10:58 UTC (permalink / raw)
To: Sami Mujawar, devel, ray.ni, Guomin Jiang
Cc: leif, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Ben.Adderson, nd, Laszlo Ersek, Andrew Fish, Kinney, Michael D
On 10/2/20 11:13 PM, Sami Mujawar wrote:
> Some virtual machine managers like Kvmtool emulate the MC146818
> RTC controller in the MMIO space so that architectures that do
> not support I/O Mapped I/O can use the RTC. This patch adds MMIO
> support to the RTC controller driver.
>
> The PCD PcdRtcUseMmio has been added to select I/O or MMIO support.
> If PcdRtcUseMmio is:
> TRUE - Indicates the RTC port registers are in MMIO space.
> FALSE - Indicates the RTC port registers are in I/O space.
> Default is I/O space.
>
> Additionally two new PCDs PcdRtcIndexRegister64 and
> PcdRtcTargetRegister64 have been introduced to provide the base
> address for the RTC registers in the MMIO space.
>
> When MMIO support is selected (PcdRtcUseMmio == TRUE) the driver
> converts the pointers to the RTC MMIO registers so that the
> RTC registers are accessible post ExitBootServices.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Thanks for the resend.
Ray, do you have any concerns regarding this patch? The series looks
otherwise ok, and I would like to get this merged this week.
Guomin, you replied before that you were intending to review this patch
after August. Do you still intend to do so?
If I don't hear from you by the end of this week, I am going to assume
there are no objections from your side.
Thanks,
Ard.
> ---
>
> Notes:
> v5:
> - Updated based on review comments. [Sami]
> - Drop the unnecessary whitespace and header changes to [Ard]
> PcRtc.h, and the whitespace changes to PcRtcEntry.c
> Ref: https://edk2.groups.io/g/devel/topic/75354083
>
> v4:
> - Updated based on review comments. [Sami]
> - Use static helper functions instead of function pointers. [Ard]
> Ref: https://edk2.groups.io/g/devel/topic/75081468
>
> v3:
> - Make PcdRtcUseMmio a feature PCD. [Sami]
> - Read the RTC MMIO base address from the DT. [Andre]
> - Introduce PCDs for RTC Index and Target register base [Sami]
> address in the MMIO space.
> - Move RTC MMIO region mapping code to a separate platform [Sami]
> specific library. This library also reads the base addresses
> for the RTC from DT and configures the RTC Index and Target
> register PCDs.
> Ref: https://edk2.groups.io/g/devel/topic/74200905#60307
>
> v2:
> - Code review comments incorporated. [Sami]
>
> v1:
> - Add support to read/write from RTC registers using [Sami]
> MMIO access
> - Use wrapper functions for RtcRead/Write accessors [Leif]
> Ref: https://edk2.groups.io/g/devel/topic/30915281#30695
>
> PcAtChipsetPkg/PcAtChipsetPkg.dec | 16 +++
> PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c | 120 ++++++++++++++++++--
> PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c | 54 ++++++++-
> PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf | 8 ++
> 4 files changed, 186 insertions(+), 12 deletions(-)
>
> diff --git a/PcAtChipsetPkg/PcAtChipsetPkg.dec b/PcAtChipsetPkg/PcAtChipsetPkg.dec
> index 88de5cceea593176c3a2425a5963b66b789f2b9e..ed2d95550b8d153995b30cdc290cf3bb905e211b 100644
> --- a/PcAtChipsetPkg/PcAtChipsetPkg.dec
> +++ b/PcAtChipsetPkg/PcAtChipsetPkg.dec
> @@ -6,6 +6,7 @@
> #
> # Copyright (c) 2009 - 2019, Intel Corporation. All rights reserved.<BR>
> # Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> +# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> @@ -41,6 +42,13 @@ [PcdsFeatureFlag]
> # @Prompt Configure HPET to use MSI.
> gPcAtChipsetPkgTokenSpaceGuid.PcdHpetMsiEnable|TRUE|BOOLEAN|0x00001000
>
> + ## Indicates the RTC port registers are in MMIO space, or in I/O space.
> + # Default is I/O space.<BR><BR>
> + # TRUE - RTC port registers are in MMIO space.<BR>
> + # FALSE - RTC port registers are in I/O space.<BR>
> + # @Prompt RTC port registers use MMIO.
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|FALSE|BOOLEAN|0x00000021
> +
> [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
> ## This PCD specifies the base address of the HPET timer.
> # @Prompt HPET base address.
> @@ -68,6 +76,14 @@ [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
> # @Expression 0x80000001 | gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear < gPcAtChipsetPkgTokenSpaceGuid.PcdMinimalValidYear + 100
> gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear|2097|UINT16|0x0000000E
>
> + ## Specifies RTC Index Register address in MMIO space.
> + # @Prompt RTC Index Register address
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0|UINT64|0x00000022
> +
> + ## Specifies RTC Target Register address in MMIO space.
> + # @Prompt RTC Target Register address
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0|UINT64|0x00000023
> +
> [PcdsFixedAtBuild, PcdsPatchableInModule]
> ## Defines the ACPI register set base address.
> # The invalid 0xFFFF is as its default value. It must be configured to the real value.
> diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
> index 52af17941786ef81c3911512ee64551724e67209..64f36f6fbbd1b03967bd1a1290d108d5b0f294fa 100644
> --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
> +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
> @@ -3,6 +3,7 @@
>
> Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> +Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -10,6 +11,9 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
>
> #include "PcRtc.h"
>
> +extern UINTN mRtcIndexRegister;
> +extern UINTN mRtcTargetRegister;
> +
> //
> // Days of month.
> //
> @@ -54,38 +58,132 @@ IsWithinOneDay (
> );
>
> /**
> + Read RTC content through its registers using IO access.
> +
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> +
> + @return The data of UINT8 type read from RTC.
> +**/
> +STATIC
> +UINT8
> +IoRtcRead (
> + IN UINTN Address
> + )
> +{
> + IoWrite8 (
> + PcdGet8 (PcdRtcIndexRegister),
> + (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80))
> + );
> + return IoRead8 (PcdGet8 (PcdRtcTargetRegister));
> +}
> +
> +/**
> + Write RTC through its registers using IO access.
> +
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> + @param Data The content you want to write into RTC.
> +
> +**/
> +STATIC
> +VOID
> +IoRtcWrite (
> + IN UINTN Address,
> + IN UINT8 Data
> + )
> +{
> + IoWrite8 (
> + PcdGet8 (PcdRtcIndexRegister),
> + (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80))
> + );
> + IoWrite8 (PcdGet8 (PcdRtcTargetRegister), Data);
> +}
> +
> +/**
> + Read RTC content through its registers using MMIO access.
> +
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> +
> + @return The data of UINT8 type read from RTC.
> +**/
> +STATIC
> +UINT8
> +MmioRtcRead (
> + IN UINTN Address
> + )
> +{
> + MmioWrite8 (
> + mRtcIndexRegister,
> + (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
> + );
> + return MmioRead8 (mRtcTargetRegister);
> +}
> +
> +/**
> + Write RTC through its registers using MMIO access.
> +
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> + @param Data The content you want to write into RTC.
> +
> +**/
> +STATIC
> +VOID
> +MmioRtcWrite (
> + IN UINTN Address,
> + IN UINT8 Data
> + )
> +{
> + MmioWrite8 (
> + mRtcIndexRegister,
> + (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
> + );
> + MmioWrite8 (mRtcTargetRegister, Data);
> +}
> +
> +/**
> Read RTC content through its registers.
>
> - @param Address Address offset of RTC. It is recommended to use macros such as
> - RTC_ADDRESS_SECONDS.
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
>
> @return The data of UINT8 type read from RTC.
> **/
> +STATIC
> UINT8
> RtcRead (
> - IN UINT8 Address
> + IN UINTN Address
> )
> {
> - IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8) (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
> - return IoRead8 (PcdGet8 (PcdRtcTargetRegister));
> + if (FeaturePcdGet (PcdRtcUseMmio)) {
> + return MmioRtcRead (Address);
> + }
> +
> + return IoRtcRead (Address);
> }
>
> /**
> Write RTC through its registers.
>
> - @param Address Address offset of RTC. It is recommended to use macros such as
> - RTC_ADDRESS_SECONDS.
> - @param Data The content you want to write into RTC.
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> + @param Data The content you want to write into RTC.
>
> **/
> +STATIC
> VOID
> RtcWrite (
> - IN UINT8 Address,
> + IN UINTN Address,
> IN UINT8 Data
> )
> {
> - IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8) (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
> - IoWrite8 (PcdGet8 (PcdRtcTargetRegister), Data);
> + if (FeaturePcdGet (PcdRtcUseMmio)) {
> + MmioRtcWrite (Address, Data);
> + } else {
> + IoRtcWrite (Address, Data);
> + }
> }
>
> /**
> diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
> index ccda6331373bfe4069b0a59495b5e5cc731c8fc8..606b88adafb7ef5d81e32e212794a5ccae9d0443 100644
> --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
> +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
> @@ -2,16 +2,23 @@
> Provides Set/Get time operations.
>
> Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> **/
>
> +#include <Library/DxeServicesTableLib.h>
> #include "PcRtc.h"
>
> PC_RTC_MODULE_GLOBALS mModuleGlobal;
>
> EFI_HANDLE mHandle = NULL;
>
> +STATIC EFI_EVENT mVirtualAddrChangeEvent;
> +
> +UINTN mRtcIndexRegister;
> +UINTN mRtcTargetRegister;
> +
> /**
> Returns the current time and date information, and the time-keeping capabilities
> of the hardware platform.
> @@ -106,6 +113,30 @@ PcRtcEfiSetWakeupTime (
> }
>
> /**
> + Fixup internal data so that EFI can be called in virtual mode.
> + Call the passed in Child Notify event and convert any pointers in
> + lib to virtual mode.
> +
> + @param[in] Event The Event that is being processed
> + @param[in] Context Event Context
> +**/
> +VOID
> +EFIAPI
> +LibRtcVirtualNotifyEvent (
> + IN EFI_EVENT Event,
> + IN VOID *Context
> + )
> +{
> + // Only needed if you are going to support the OS calling RTC functions in
> + // virtual mode. You will need to call EfiConvertPointer (). To convert any
> + // stored physical addresses to virtual address. After the OS transitions to
> + // calling in virtual mode, all future runtime calls will be made in virtual
> + // mode.
> + EfiConvertPointer (0x0, (VOID**)&mRtcIndexRegister);
> + EfiConvertPointer (0x0, (VOID**)&mRtcTargetRegister);
> +}
> +
> +/**
> The user Entry Point for PcRTC module.
>
> This is the entry point for PcRTC module. It installs the UEFI runtime service
> @@ -131,6 +162,11 @@ InitializePcRtc (
> EfiInitializeLock (&mModuleGlobal.RtcLock, TPL_CALLBACK);
> mModuleGlobal.CenturyRtcAddress = GetCenturyRtcAddress ();
>
> + if (FeaturePcdGet (PcdRtcUseMmio)) {
> + mRtcIndexRegister = (UINTN)PcdGet64 (PcdRtcIndexRegister64);
> + mRtcTargetRegister = (UINTN)PcdGet64 (PcdRtcTargetRegister64);
> + }
> +
> Status = PcRtcInit (&mModuleGlobal);
> ASSERT_EFI_ERROR (Status);
>
> @@ -165,7 +201,23 @@ InitializePcRtc (
> NULL,
> NULL
> );
> - ASSERT_EFI_ERROR (Status);
> + if (EFI_ERROR (Status)) {
> + ASSERT_EFI_ERROR (Status);
> + return Status;
> + }
> +
> + if (FeaturePcdGet (PcdRtcUseMmio)) {
> + // Register for the virtual address change event
> + Status = gBS->CreateEventEx (
> + EVT_NOTIFY_SIGNAL,
> + TPL_NOTIFY,
> + LibRtcVirtualNotifyEvent,
> + NULL,
> + &gEfiEventVirtualAddressChangeGuid,
> + &mVirtualAddrChangeEvent
> + );
> + ASSERT_EFI_ERROR (Status);
> + }
>
> return Status;
> }
> diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
> index c73ee98105e510f9e4e23c1a6c1e5c505325d2c9..0d8eca28b65954b073a72fc4fe5ad6247320e79d 100644
> --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
> +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
> @@ -6,6 +6,7 @@
> #
> # Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> # Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> +# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> @@ -61,6 +62,11 @@ [Guids]
> ## SOMETIMES_CONSUMES ## SystemTable
> gEfiAcpiTableGuid
>
> + gEfiEventVirtualAddressChangeGuid
> +
> +[FeaturePcd]
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio ## CONSUMES
> +
> [FixedPcd]
> gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterA ## CONSUMES
> gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterB ## CONSUMES
> @@ -72,6 +78,8 @@ [Pcd]
> gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear ## CONSUMES
> gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister ## CONSUMES
> gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister ## CONSUMES
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64 ## CONSUMES
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64 ## CONSUMES
>
> [Depex]
> gEfiVariableArchProtocolGuid AND gEfiVariableWriteArchProtocolGuid
>
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [PATCH v5 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver
2020-10-05 10:58 ` Ard Biesheuvel
@ 2020-10-06 10:16 ` Laszlo Ersek
2020-10-15 14:35 ` Ard Biesheuvel
0 siblings, 1 reply; 24+ messages in thread
From: Laszlo Ersek @ 2020-10-06 10:16 UTC (permalink / raw)
To: Ard Biesheuvel, Sami Mujawar, devel, ray.ni, Guomin Jiang
Cc: leif, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Ben.Adderson, nd, Andrew Fish, Kinney, Michael D
Hi Ard,
On 10/05/20 12:58, Ard Biesheuvel wrote:
> On 10/2/20 11:13 PM, Sami Mujawar wrote:
>> Some virtual machine managers like Kvmtool emulate the MC146818
>> RTC controller in the MMIO space so that architectures that do
>> not support I/O Mapped I/O can use the RTC. This patch adds MMIO
>> support to the RTC controller driver.
>>
>> The PCD PcdRtcUseMmio has been added to select I/O or MMIO support.
>> If PcdRtcUseMmio is:
>> TRUE - Indicates the RTC port registers are in MMIO space.
>> FALSE - Indicates the RTC port registers are in I/O space.
>> Default is I/O space.
>>
>> Additionally two new PCDs PcdRtcIndexRegister64 and
>> PcdRtcTargetRegister64 have been introduced to provide the base
>> address for the RTC registers in the MMIO space.
>>
>> When MMIO support is selected (PcdRtcUseMmio == TRUE) the driver
>> converts the pointers to the RTC MMIO registers so that the
>> RTC registers are accessible post ExitBootServices.
>>
>> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
>> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
>
> Thanks for the resend.
>
> Ray, do you have any concerns regarding this patch? The series looks
> otherwise ok, and I would like to get this merged this week.
Thank you very much for handling this. I've skimmed the series quickly
and it mostly adds new files. I think the risk of regressions is really
low. Please feel free to merge this from my side.
For wherever it applies in the series:
Acked-by: Laszlo Ersek <lersek@redhat.com>
Thanks
Laszlo
>
> Guomin, you replied before that you were intending to review this patch
> after August. Do you still intend to do so?
>
> If I don't hear from you by the end of this week, I am going to assume
> there are no objections from your side.
>
> Thanks,
> Ard.
>
>
>> ---
>>
>> Notes:
>> v5:
>> - Updated based on review comments.
>> [Sami]
>> - Drop the unnecessary whitespace and header changes to
>> [Ard]
>> PcRtc.h, and the whitespace changes to PcRtcEntry.c
>> Ref: https://edk2.groups.io/g/devel/topic/75354083
>> v4:
>> - Updated based on review comments.
>> [Sami]
>> - Use static helper functions instead of function pointers.
>> [Ard]
>> Ref: https://edk2.groups.io/g/devel/topic/75081468
>> v3:
>> - Make PcdRtcUseMmio a feature PCD.
>> [Sami]
>> - Read the RTC MMIO base address from the DT.
>> [Andre]
>> - Introduce PCDs for RTC Index and Target register base
>> [Sami]
>> address in the MMIO space.
>> - Move RTC MMIO region mapping code to a separate platform
>> [Sami]
>> specific library. This library also reads the base addresses
>> for the RTC from DT and configures the RTC Index and Target
>> register PCDs.
>> Ref: https://edk2.groups.io/g/devel/topic/74200905#60307
>> v2:
>> - Code review comments incorporated.
>> [Sami]
>> v1:
>> - Add support to read/write from RTC registers using
>> [Sami]
>> MMIO access
>> - Use wrapper functions for RtcRead/Write accessors
>> [Leif]
>> Ref: https://edk2.groups.io/g/devel/topic/30915281#30695
>>
>>
>> PcAtChipsetPkg/PcAtChipsetPkg.dec
>> | 16 +++
>>
>> PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
>> | 120 ++++++++++++++++++--
>>
>> PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
>> | 54 ++++++++-
>>
>> PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
>> | 8 ++
>> 4 files changed, 186 insertions(+), 12 deletions(-)
>>
>> diff --git a/PcAtChipsetPkg/PcAtChipsetPkg.dec
>> b/PcAtChipsetPkg/PcAtChipsetPkg.dec
>> index
>> 88de5cceea593176c3a2425a5963b66b789f2b9e..ed2d95550b8d153995b30cdc290cf3bb905e211b
>> 100644
>> --- a/PcAtChipsetPkg/PcAtChipsetPkg.dec
>> +++ b/PcAtChipsetPkg/PcAtChipsetPkg.dec
>> @@ -6,6 +6,7 @@
>> #
>> # Copyright (c) 2009 - 2019, Intel Corporation. All rights
>> reserved.<BR>
>> # Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
>> +# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
>> #
>> # SPDX-License-Identifier: BSD-2-Clause-Patent
>> #
>> @@ -41,6 +42,13 @@ [PcdsFeatureFlag]
>> # @Prompt Configure HPET to use MSI.
>>
>> gPcAtChipsetPkgTokenSpaceGuid.PcdHpetMsiEnable|TRUE|BOOLEAN|0x00001000
>> + ## Indicates the RTC port registers are in MMIO space, or in I/O
>> space.
>> + # Default is I/O space.<BR><BR>
>> + # TRUE - RTC port registers are in MMIO space.<BR>
>> + # FALSE - RTC port registers are in I/O space.<BR>
>> + # @Prompt RTC port registers use MMIO.
>> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|FALSE|BOOLEAN|0x00000021
>> +
>> [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
>> ## This PCD specifies the base address of the HPET timer.
>> # @Prompt HPET base address.
>> @@ -68,6 +76,14 @@ [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx,
>> PcdsPatchableInModule]
>> # @Expression 0x80000001 |
>> gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear <
>> gPcAtChipsetPkgTokenSpaceGuid.PcdMinimalValidYear + 100
>>
>> gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear|2097|UINT16|0x0000000E
>> + ## Specifies RTC Index Register address in MMIO space.
>> + # @Prompt RTC Index Register address
>> +
>> gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0|UINT64|0x00000022
>> +
>> + ## Specifies RTC Target Register address in MMIO space.
>> + # @Prompt RTC Target Register address
>> +
>> gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0|UINT64|0x00000023
>>
>> +
>> [PcdsFixedAtBuild, PcdsPatchableInModule]
>> ## Defines the ACPI register set base address.
>> # The invalid 0xFFFF is as its default value. It must be
>> configured to the real value.
>> diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
>> b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
>> index
>> 52af17941786ef81c3911512ee64551724e67209..64f36f6fbbd1b03967bd1a1290d108d5b0f294fa
>> 100644
>> --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
>> +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
>> @@ -3,6 +3,7 @@
>> Copyright (c) 2006 - 2018, Intel Corporation. All rights
>> reserved.<BR>
>> Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
>> +Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
>> SPDX-License-Identifier: BSD-2-Clause-Patent
>> @@ -10,6 +11,9 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
>> #include "PcRtc.h"
>> +extern UINTN mRtcIndexRegister;
>> +extern UINTN mRtcTargetRegister;
>> +
>> //
>> // Days of month.
>> //
>> @@ -54,38 +58,132 @@ IsWithinOneDay (
>> );
>> /**
>> + Read RTC content through its registers using IO access.
>> +
>> + @param Address Address offset of RTC. It is recommended to use
>> + macros such as RTC_ADDRESS_SECONDS.
>> +
>> + @return The data of UINT8 type read from RTC.
>> +**/
>> +STATIC
>> +UINT8
>> +IoRtcRead (
>> + IN UINTN Address
>> + )
>> +{
>> + IoWrite8 (
>> + PcdGet8 (PcdRtcIndexRegister),
>> + (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister))
>> & 0x80))
>> + );
>> + return IoRead8 (PcdGet8 (PcdRtcTargetRegister));
>> +}
>> +
>> +/**
>> + Write RTC through its registers using IO access.
>> +
>> + @param Address Address offset of RTC. It is recommended to use
>> + macros such as RTC_ADDRESS_SECONDS.
>> + @param Data The content you want to write into RTC.
>> +
>> +**/
>> +STATIC
>> +VOID
>> +IoRtcWrite (
>> + IN UINTN Address,
>> + IN UINT8 Data
>> + )
>> +{
>> + IoWrite8 (
>> + PcdGet8 (PcdRtcIndexRegister),
>> + (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister))
>> & 0x80))
>> + );
>> + IoWrite8 (PcdGet8 (PcdRtcTargetRegister), Data);
>> +}
>> +
>> +/**
>> + Read RTC content through its registers using MMIO access.
>> +
>> + @param Address Address offset of RTC. It is recommended to use
>> + macros such as RTC_ADDRESS_SECONDS.
>> +
>> + @return The data of UINT8 type read from RTC.
>> +**/
>> +STATIC
>> +UINT8
>> +MmioRtcRead (
>> + IN UINTN Address
>> + )
>> +{
>> + MmioWrite8 (
>> + mRtcIndexRegister,
>> + (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
>> + );
>> + return MmioRead8 (mRtcTargetRegister);
>> +}
>> +
>> +/**
>> + Write RTC through its registers using MMIO access.
>> +
>> + @param Address Address offset of RTC. It is recommended to use
>> + macros such as RTC_ADDRESS_SECONDS.
>> + @param Data The content you want to write into RTC.
>> +
>> +**/
>> +STATIC
>> +VOID
>> +MmioRtcWrite (
>> + IN UINTN Address,
>> + IN UINT8 Data
>> + )
>> +{
>> + MmioWrite8 (
>> + mRtcIndexRegister,
>> + (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
>> + );
>> + MmioWrite8 (mRtcTargetRegister, Data);
>> +}
>> +
>> +/**
>> Read RTC content through its registers.
>> - @param Address Address offset of RTC. It is recommended to use
>> macros such as
>> - RTC_ADDRESS_SECONDS.
>> + @param Address Address offset of RTC. It is recommended to use
>> + macros such as RTC_ADDRESS_SECONDS.
>> @return The data of UINT8 type read from RTC.
>> **/
>> +STATIC
>> UINT8
>> RtcRead (
>> - IN UINT8 Address
>> + IN UINTN Address
>> )
>> {
>> - IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8)
>> (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
>> - return IoRead8 (PcdGet8 (PcdRtcTargetRegister));
>> + if (FeaturePcdGet (PcdRtcUseMmio)) {
>> + return MmioRtcRead (Address);
>> + }
>> +
>> + return IoRtcRead (Address);
>> }
>> /**
>> Write RTC through its registers.
>> - @param Address Address offset of RTC. It is recommended to use
>> macros such as
>> - RTC_ADDRESS_SECONDS.
>> - @param Data The content you want to write into RTC.
>> + @param Address Address offset of RTC. It is recommended to use
>> + macros such as RTC_ADDRESS_SECONDS.
>> + @param Data The content you want to write into RTC.
>> **/
>> +STATIC
>> VOID
>> RtcWrite (
>> - IN UINT8 Address,
>> + IN UINTN Address,
>> IN UINT8 Data
>> )
>> {
>> - IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8)
>> (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
>> - IoWrite8 (PcdGet8 (PcdRtcTargetRegister), Data);
>> + if (FeaturePcdGet (PcdRtcUseMmio)) {
>> + MmioRtcWrite (Address, Data);
>> + } else {
>> + IoRtcWrite (Address, Data);
>> + }
>> }
>> /**
>> diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
>> b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
>> index
>> ccda6331373bfe4069b0a59495b5e5cc731c8fc8..606b88adafb7ef5d81e32e212794a5ccae9d0443
>> 100644
>> --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
>> +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
>> @@ -2,16 +2,23 @@
>> Provides Set/Get time operations.
>> Copyright (c) 2006 - 2018, Intel Corporation. All rights
>> reserved.<BR>
>> +Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
>> SPDX-License-Identifier: BSD-2-Clause-Patent
>> **/
>> +#include <Library/DxeServicesTableLib.h>
>> #include "PcRtc.h"
>> PC_RTC_MODULE_GLOBALS mModuleGlobal;
>> EFI_HANDLE mHandle = NULL;
>> +STATIC EFI_EVENT mVirtualAddrChangeEvent;
>> +
>> +UINTN mRtcIndexRegister;
>> +UINTN mRtcTargetRegister;
>> +
>> /**
>> Returns the current time and date information, and the
>> time-keeping capabilities
>> of the hardware platform.
>> @@ -106,6 +113,30 @@ PcRtcEfiSetWakeupTime (
>> }
>> /**
>> + Fixup internal data so that EFI can be called in virtual mode.
>> + Call the passed in Child Notify event and convert any pointers in
>> + lib to virtual mode.
>> +
>> + @param[in] Event The Event that is being processed
>> + @param[in] Context Event Context
>> +**/
>> +VOID
>> +EFIAPI
>> +LibRtcVirtualNotifyEvent (
>> + IN EFI_EVENT Event,
>> + IN VOID *Context
>> + )
>> +{
>> + // Only needed if you are going to support the OS calling RTC
>> functions in
>> + // virtual mode. You will need to call EfiConvertPointer (). To
>> convert any
>> + // stored physical addresses to virtual address. After the OS
>> transitions to
>> + // calling in virtual mode, all future runtime calls will be made
>> in virtual
>> + // mode.
>> + EfiConvertPointer (0x0, (VOID**)&mRtcIndexRegister);
>> + EfiConvertPointer (0x0, (VOID**)&mRtcTargetRegister);
>> +}
>> +
>> +/**
>> The user Entry Point for PcRTC module.
>> This is the entry point for PcRTC module. It installs the UEFI
>> runtime service
>> @@ -131,6 +162,11 @@ InitializePcRtc (
>> EfiInitializeLock (&mModuleGlobal.RtcLock, TPL_CALLBACK);
>> mModuleGlobal.CenturyRtcAddress = GetCenturyRtcAddress ();
>> + if (FeaturePcdGet (PcdRtcUseMmio)) {
>> + mRtcIndexRegister = (UINTN)PcdGet64 (PcdRtcIndexRegister64);
>> + mRtcTargetRegister = (UINTN)PcdGet64 (PcdRtcTargetRegister64);
>> + }
>> +
>> Status = PcRtcInit (&mModuleGlobal);
>> ASSERT_EFI_ERROR (Status);
>> @@ -165,7 +201,23 @@ InitializePcRtc (
>> NULL,
>> NULL
>> );
>> - ASSERT_EFI_ERROR (Status);
>> + if (EFI_ERROR (Status)) {
>> + ASSERT_EFI_ERROR (Status);
>> + return Status;
>> + }
>> +
>> + if (FeaturePcdGet (PcdRtcUseMmio)) {
>> + // Register for the virtual address change event
>> + Status = gBS->CreateEventEx (
>> + EVT_NOTIFY_SIGNAL,
>> + TPL_NOTIFY,
>> + LibRtcVirtualNotifyEvent,
>> + NULL,
>> + &gEfiEventVirtualAddressChangeGuid,
>> + &mVirtualAddrChangeEvent
>> + );
>> + ASSERT_EFI_ERROR (Status);
>> + }
>> return Status;
>> }
>> diff --git
>> a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
>> b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
>>
>> index
>> c73ee98105e510f9e4e23c1a6c1e5c505325d2c9..0d8eca28b65954b073a72fc4fe5ad6247320e79d
>> 100644
>> ---
>> a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
>>
>> +++
>> b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
>>
>> @@ -6,6 +6,7 @@
>> #
>> # Copyright (c) 2006 - 2019, Intel Corporation. All rights
>> reserved.<BR>
>> # Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
>> +# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
>> #
>> # SPDX-License-Identifier: BSD-2-Clause-Patent
>> #
>> @@ -61,6 +62,11 @@ [Guids]
>> ## SOMETIMES_CONSUMES ## SystemTable
>> gEfiAcpiTableGuid
>> + gEfiEventVirtualAddressChangeGuid
>> +
>> +[FeaturePcd]
>> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio ##
>> CONSUMES
>> +
>> [FixedPcd]
>> gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterA ##
>> CONSUMES
>> gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterB ##
>> CONSUMES
>> @@ -72,6 +78,8 @@ [Pcd]
>> gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear ##
>> CONSUMES
>> gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister ##
>> CONSUMES
>> gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister ##
>> CONSUMES
>> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64 ##
>> CONSUMES
>> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64 ##
>> CONSUMES
>> [Depex]
>> gEfiVariableArchProtocolGuid AND gEfiVariableWriteArchProtocolGuid
>>
>
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [PATCH v5 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver
2020-10-06 10:16 ` Laszlo Ersek
@ 2020-10-15 14:35 ` Ard Biesheuvel
0 siblings, 0 replies; 24+ messages in thread
From: Ard Biesheuvel @ 2020-10-15 14:35 UTC (permalink / raw)
To: Laszlo Ersek, Sami Mujawar, devel, ray.ni, Guomin Jiang
Cc: leif, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Ben.Adderson, nd, Andrew Fish, Kinney, Michael D
On 10/6/20 12:16 PM, Laszlo Ersek wrote:
> Hi Ard,
>
> On 10/05/20 12:58, Ard Biesheuvel wrote:
>> On 10/2/20 11:13 PM, Sami Mujawar wrote:
>>> Some virtual machine managers like Kvmtool emulate the MC146818
>>> RTC controller in the MMIO space so that architectures that do
>>> not support I/O Mapped I/O can use the RTC. This patch adds MMIO
>>> support to the RTC controller driver.
>>>
>>> The PCD PcdRtcUseMmio has been added to select I/O or MMIO support.
>>> If PcdRtcUseMmio is:
>>> TRUE - Indicates the RTC port registers are in MMIO space.
>>> FALSE - Indicates the RTC port registers are in I/O space.
>>> Default is I/O space.
>>>
>>> Additionally two new PCDs PcdRtcIndexRegister64 and
>>> PcdRtcTargetRegister64 have been introduced to provide the base
>>> address for the RTC registers in the MMIO space.
>>>
>>> When MMIO support is selected (PcdRtcUseMmio == TRUE) the driver
>>> converts the pointers to the RTC MMIO registers so that the
>>> RTC registers are accessible post ExitBootServices.
>>>
>>> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
>>> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
>>
>> Thanks for the resend.
>>
>> Ray, do you have any concerns regarding this patch? The series looks
>> otherwise ok, and I would like to get this merged this week.
>
> Thank you very much for handling this. I've skimmed the series quickly
> and it mostly adds new files. I think the risk of regressions is really
> low. Please feel free to merge this from my side.
>
> For wherever it applies in the series:
>
> Acked-by: Laszlo Ersek <lersek@redhat.com>
>
Thank you Laszlo.
Note to all: I have given ample time to anyone involved to respond to
this series, and to this patch in particular. Therefore, I am going to
assume there are no objections, and I intend to merge this entire series
tomorrow.
Thanks,
Ard.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v5 02/15] ArmVirtPkg: Add Kvmtool RTC Fdt Client Library
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
2020-10-02 21:13 ` [PATCH v5 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver Sami Mujawar
@ 2020-10-02 21:13 ` Sami Mujawar
2020-10-02 21:13 ` [PATCH v5 03/15] ArmPlatformPkg: Dynamic flash variable base Sami Mujawar
` (13 subsequent siblings)
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:13 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Ben.Adderson, nd
Add library that parses the Kvmtool device tree and updates
the dynamic PCDs describing the RTC Memory map.
It also maps the MMIO region used by the RTC as runtime memory
so that the RTC registers are accessible post ExitBootServices.
Since UEFI takes ownership of the RTC hardware disable the RTC
node in the DT to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
Notes:
v5:
- Fixed minor ECC reported issues in file header. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/75354087
v4:
- Updated based on review comments. [Sami]
- Cleanup include file list, make local functions static, [Ard]
drop EFIAPI, use EFI_PAGE_MASK and use ReadUnaligned64.
Ref: https://edk2.groups.io/g/devel/topic/75081472
v3:
- Introduce library to read and map the MMIO base addresses [Sami]
for the RTC registers from the DT and configure the Index
and Target register PCDs.
ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c | 230 ++++++++++++++++++++
ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf | 42 ++++
2 files changed, 272 insertions(+)
diff --git a/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c
new file mode 100644
index 0000000000000000000000000000000000000000..93715958952f933007ff143a22cbe81606cc539e
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c
@@ -0,0 +1,230 @@
+/** @file
+ FDT client library for motorola,mc146818 RTC driver
+
+ Copyright (c) 2020, ARM Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/FdtClient.h>
+
+/** RTC Index register is at offset 0x0
+*/
+#define RTC_INDEX_REG_OFFSET 0x0ULL
+
+/** RTC Target register is at offset 0x1
+*/
+#define RTC_TARGET_REG_OFFSET 0x1ULL
+
+/** Add the RTC controller address range to the memory map.
+
+ @param [in] ImageHandle The handle to the image.
+ @param [in] RtcPageBase Base address of the RTC controller.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND Flash device not found.
+**/
+STATIC
+EFI_STATUS
+KvmtoolRtcMapMemory (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_PHYSICAL_ADDRESS RtcPageBase
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gDS->AddMemorySpace (
+ EfiGcdMemoryTypeMemoryMappedIo,
+ RtcPageBase,
+ EFI_PAGE_SIZE,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR, "Failed to add memory space. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ Status = gDS->AllocateMemorySpace (
+ EfiGcdAllocateAddress,
+ EfiGcdMemoryTypeMemoryMappedIo,
+ 0,
+ EFI_PAGE_SIZE,
+ &RtcPageBase,
+ ImageHandle,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Failed to allocate memory space. Status = %r\n",
+ Status
+ ));
+ gDS->RemoveMemorySpace (
+ RtcPageBase,
+ EFI_PAGE_SIZE
+ );
+ return Status;
+ }
+
+ Status = gDS->SetMemorySpaceAttributes (
+ RtcPageBase,
+ EFI_PAGE_SIZE,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Failed to set memory attributes. Status = %r\n",
+ Status
+ ));
+ gDS->FreeMemorySpace (
+ RtcPageBase,
+ EFI_PAGE_SIZE
+ );
+ gDS->RemoveMemorySpace (
+ RtcPageBase,
+ EFI_PAGE_SIZE
+ );
+ }
+
+ return Status;
+}
+
+/** Entrypoint for KvmtoolRtcFdtClientLib.
+
+ Locate the RTC node in the DT and update the Index and
+ Target register base addresses in the respective PCDs.
+ Add the RTC memory region to the memory map.
+ Disable the RTC node as the RTC is owned by UEFI.
+
+ @param [in] ImageHandle The handle to the image.
+ @param [in] SystemTable Pointer to the System Table.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND Flash device not found.
+**/
+EFI_STATUS
+EFIAPI
+KvmtoolRtcFdtClientLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ FDT_CLIENT_PROTOCOL *FdtClient;
+ INT32 Node;
+ CONST UINT32 *Reg;
+ UINT32 RegSize;
+ UINT64 RegBase;
+ UINT64 Range;
+ RETURN_STATUS PcdStatus;
+
+ Status = gBS->LocateProtocol (
+ &gFdtClientProtocolGuid,
+ NULL,
+ (VOID **)&FdtClient
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = FdtClient->FindCompatibleNode (
+ FdtClient,
+ "motorola,mc146818",
+ &Node
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: No 'motorola,mc146818' compatible DT node found\n",
+ __FUNCTION__
+ ));
+ return Status;
+ }
+
+ Status = FdtClient->GetNodeProperty (
+ FdtClient,
+ Node,
+ "reg",
+ (CONST VOID **)&Reg,
+ &RegSize
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: No 'reg' property found in 'motorola,mc146818' compatible DT node\n",
+ __FUNCTION__
+ ));
+ return Status;
+ }
+
+ ASSERT (RegSize == 16);
+
+ RegBase = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[0]));
+ Range = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[2]));
+ DEBUG ((
+ DEBUG_INFO,
+ "Found motorola,mc146818 RTC @ 0x%Lx Range = 0x%x\n",
+ RegBase,
+ Range
+ ));
+
+ // The address range must cover the RTC Index and the Target registers.
+ ASSERT (Range >= 0x2);
+
+ // RTC Index register is at offset 0x0
+ PcdStatus = PcdSet64S (
+ PcdRtcIndexRegister64,
+ (RegBase + RTC_INDEX_REG_OFFSET)
+ );
+ ASSERT_RETURN_ERROR (PcdStatus);
+
+ // RTC Target register is at offset 0x1
+ PcdStatus = PcdSet64S (
+ PcdRtcTargetRegister64,
+ (RegBase + RTC_TARGET_REG_OFFSET)
+ );
+ ASSERT_RETURN_ERROR (PcdStatus);
+
+ Status = KvmtoolRtcMapMemory (ImageHandle, (RegBase & ~EFI_PAGE_MASK));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Failed to map memory for motorola,mc146818. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ //
+ // UEFI takes ownership of the RTC hardware, and exposes its functionality
+ // through the UEFI Runtime Services GetTime, SetTime, etc. This means we
+ // need to disable it in the device tree to prevent the OS from attaching
+ // its device driver as well.
+ //
+ Status = FdtClient->SetNodeProperty (
+ FdtClient,
+ Node,
+ "status",
+ "disabled",
+ sizeof ("disabled")
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_WARN,
+ "Failed to set motorola,mc146818 status to 'disabled', Status = %r\n",
+ Status
+ ));
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..deb3bf635c1e89433832c4801328087c5b9daddc
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
@@ -0,0 +1,42 @@
+## @file
+# FDT client library for motorola,mc146818 RTC driver
+#
+# Copyright (c) 2020, ARM Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = KvmtoolRtcFdtClientLib
+ FILE_GUID = 3254B4F7-30B5-48C6-B06A-D8FF97F3EF95
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = KvmtoolRtcFdtClientLib|DXE_DRIVER DXE_RUNTIME_DRIVER
+ CONSTRUCTOR = KvmtoolRtcFdtClientLibConstructor
+
+[Sources]
+ KvmtoolRtcFdtClientLib.c
+
+[Packages]
+ ArmVirtPkg/ArmVirtPkg.dec
+ MdePkg/MdePkg.dec
+ PcAtChipsetPkg/PcAtChipsetPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ PcdLib
+ UefiBootServicesTableLib
+ DxeServicesTableLib
+
+[Protocols]
+ gFdtClientProtocolGuid ## CONSUMES
+
+[Pcd]
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64
+
+[Depex]
+ gFdtClientProtocolGuid
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v5 03/15] ArmPlatformPkg: Dynamic flash variable base
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
2020-10-02 21:13 ` [PATCH v5 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver Sami Mujawar
2020-10-02 21:13 ` [PATCH v5 02/15] ArmVirtPkg: Add Kvmtool RTC Fdt Client Library Sami Mujawar
@ 2020-10-02 21:13 ` Sami Mujawar
2020-10-02 21:13 ` [PATCH v5 04/15] ArmVirtPkg: Add kvmtool platform driver Sami Mujawar
` (12 subsequent siblings)
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:13 UTC (permalink / raw)
To: devel; +Cc: Sami Mujawar, ard.biesheuvel, leif, philmd
Some virtual machine managers like kvmtool can relocate
the devices in the system memory map. The information
about the devices location in memory is described in the
device tree. Therefore, the CFI memory region and the
associated Non volatile storage variables need to be
adjusted accordingly.
To support such use cases the non-volatile storage
variable base PCD PcdFlashNvStorageVariableBase has
been defined as a dynamic PCD.
The NOR flash driver was using the Flash non-volatile
storage variable base PCD as a fixed PCD, thereby
preventing runtime resolution of the variable base
address.
Therefore update the NOR flash driver to load the
PCD using PcdGet32 instead of FixedPcdGet32.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
---
Notes:
v5:
- No code changes, resending patch with v5 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/62140
v4:
- No code changes, resending patch with v4 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/61666
v3:
- Resend patch with updated series. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/74200906#60337
v2:
- Add support to make PCD PcdFlashNvStorageVariableBase [Sami]
a dynamic PCD and update NOR flash driver to PcdGet32
instead of FixedPcdGet32
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvbDxe.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvbDxe.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvbDxe.c
index e248fdf6db94191648b5d33bf1a9263f446ee141..9cdd85096a463f69b3b864cecdeaf247e65f4f73 100644
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvbDxe.c
+++ b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvbDxe.c
@@ -1,6 +1,6 @@
/*++ @file NorFlashFvbDxe.c
- Copyright (c) 2011 - 2014, ARM Ltd. All rights reserved.<BR>
+ Copyright (c) 2011 - 2020, ARM Ltd. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -736,7 +736,7 @@ NorFlashFvbInitialize (
EFI_MEMORY_UC | EFI_MEMORY_RUNTIME);
ASSERT_EFI_ERROR (Status);
- mFlashNvStorageVariableBase = FixedPcdGet32 (PcdFlashNvStorageVariableBase);
+ mFlashNvStorageVariableBase = PcdGet32 (PcdFlashNvStorageVariableBase);
// Set the index of the first LBA for the FVB
Instance->StartLba = (PcdGet32 (PcdFlashNvStorageVariableBase) - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v5 04/15] ArmVirtPkg: Add kvmtool platform driver
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (2 preceding siblings ...)
2020-10-02 21:13 ` [PATCH v5 03/15] ArmPlatformPkg: Dynamic flash variable base Sami Mujawar
@ 2020-10-02 21:13 ` Sami Mujawar
2020-10-02 21:13 ` [PATCH v5 05/15] ArmVirtPkg: kvmtool platform memory map Sami Mujawar
` (11 subsequent siblings)
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:13 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Ben.Adderson, nd
Kvmtool is a virtual machine manager that enables
hosting KVM guests. It essentially provides a
virtual hardware platform for guest operating
systems.
Kvmtool hands of a device tree containing the
current hardware configuration to the firmware.
A standards-based operating system would use
ACPI to consume the platform hardware
information, while some operating systems may
prefer to use Device Tree.
The KvmtoolPlatformDxe performs the platform
actions like determining if the firmware should
expose ACPI or the Device Tree based hardware
description to the operating system.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
---
Notes:
v5:
- Fixed minor ECC reported issues in file header. [Sami]
Ref: https://edk2.groups.io/g/devel/message/62159
v4:
- Cleaned up include file and LibraryClasses list. [Sami]
- Missing MemoryAllocationLib here - either add it [Ard]
here, or remove it from LibraryClasses.
Ref: https://edk2.groups.io/g/devel/message/61714
v3:
- Don't use CpuDeadLoop()s in your drivers. [Ard]
- Returned error code instead of dead loop. [Sami]
- Installing a protocol on an image handle should not [Ard]
ever fail. So just use ASSERT_EFI_ERROR().
- Added assert and returned status code. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/74200911#59650
v2:
- Updated according to review comments. [Sami]
v1:
- Add kvmtool platform driver to support loading platform [Sami]
specific information.
- Keep code to initialise the variable storage PCDs in the [Laszlo]
platform-specific FVB driver.
- Document code derived from [Laszlo]
"ArmVirtPkg/PlatformHasAcpiDtDxe"
Ref: https://edk2.groups.io/g/devel/topic/30915278#30757
ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c | 82 ++++++++++++++++++++
ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf | 43 ++++++++++
2 files changed, 125 insertions(+)
diff --git a/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c
new file mode 100644
index 0000000000000000000000000000000000000000..a42b64d1061dcdf8163775f66b6d2f550e481315
--- /dev/null
+++ b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c
@@ -0,0 +1,82 @@
+/** @file
+
+ The KvmtoolPlatformDxe performs the platform specific initialization like:
+ - It decides if the firmware should expose ACPI or Device Tree-based
+ hardware description to the operating system.
+
+ Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Guid/VariableFormat.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/FdtClient.h>
+
+/** Decide if the firmware should expose ACPI tables or Device Tree and
+ install the appropriate protocol interface.
+
+ Note: This function is derived from "ArmVirtPkg/PlatformHasAcpiDtDxe",
+ by dropping the word size check, and the fw_cfg check.
+
+ @param [in] ImageHandle Handle for this image.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_OUT_OF_RESOURCES There was not enough memory to install the
+ protocols.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+
+**/
+STATIC
+EFI_STATUS
+PlatformHasAcpiDt (
+ IN EFI_HANDLE ImageHandle
+ )
+{
+ if (!PcdGetBool (PcdForceNoAcpi)) {
+ // Expose ACPI tables
+ return gBS->InstallProtocolInterface (
+ &ImageHandle,
+ &gEdkiiPlatformHasAcpiGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+ }
+
+ // Expose the Device Tree.
+ return gBS->InstallProtocolInterface (
+ &ImageHandle,
+ &gEdkiiPlatformHasDeviceTreeGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+}
+
+/** Entry point for Kvmtool Platform Dxe
+
+ @param [in] ImageHandle Handle for this image.
+ @param [in] SystemTable Pointer to the EFI system table.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_OUT_OF_RESOURCES There was not enough memory to install the
+ protocols.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+KvmtoolPlatformDxeEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = PlatformHasAcpiDt (ImageHandle);
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
diff --git a/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
new file mode 100644
index 0000000000000000000000000000000000000000..1cf25780f8300edab607d0c1dfbf7255404226df
--- /dev/null
+++ b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
@@ -0,0 +1,43 @@
+## @file
+# The KvmtoolPlatformDxe performs the platform specific initialization like:
+# - It decides if the firmware should expose ACPI or Device Tree-based
+# hardware description to the operating system.
+#
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = KvmtoolPlatformDxe
+ FILE_GUID = 7479CCCD-D721-442A-8C73-A72DBB886669
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = KvmtoolPlatformDxeEntryPoint
+
+[Sources]
+ KvmtoolPlatformDxe.c
+
+[Packages]
+ ArmVirtPkg/ArmVirtPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+
+[Guids]
+ gEdkiiPlatformHasAcpiGuid ## SOMETIMES_PRODUCES ## PROTOCOL
+ gEdkiiPlatformHasDeviceTreeGuid ## SOMETIMES_PRODUCES ## PROTOCOL
+
+[Pcd]
+ gArmVirtTokenSpaceGuid.PcdForceNoAcpi
+
+[Depex]
+ TRUE
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v5 05/15] ArmVirtPkg: kvmtool platform memory map
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (3 preceding siblings ...)
2020-10-02 21:13 ` [PATCH v5 04/15] ArmVirtPkg: Add kvmtool platform driver Sami Mujawar
@ 2020-10-02 21:13 ` Sami Mujawar
2020-10-02 21:14 ` [PATCH v5 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib Sami Mujawar
` (10 subsequent siblings)
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:13 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Ben.Adderson, nd
Kvmtool is a virtual machine manager that enables
hosting KVM guests. Kvmtool allows to vary the
hardware configuration of the virtual platform
it provides to the guest partition. It provides
the current hardware configuration to the firmware
by handing off a device tree containing the hardware
information.
This library parses the kvmtool provided device
tree and populates the system memory map for the
kvmtool virtual platform.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
v5:
- Fixed minor ECC reported issues in file header and [Sami]
also a minor fix for ECC error "5007: There should
be no initialization of a variable as part of its
declaration".
Ref: https://edk2.groups.io/g/devel/message/62145
v4:
- Remove logging code as this requires support for Early [Sami]
serial port initialisation which is dropped in this
series as it would not work with Xen.
Ref: https://edk2.groups.io/g/devel/message/61669
https://edk2.groups.io/g/devel/topic/75081479
v3:
- Fix coding style, use "Txt" in LOG_VM_MAP(txt). [Laszlo]
- Fixed coding style and also formatted log output. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/74200913#59548
v2:
- Library to populate Kvmtool system memory map. [Sami]
ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.c | 98 ++++++++++++++++++++
ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf | 43 +++++++++
2 files changed, 141 insertions(+)
diff --git a/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.c b/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.c
new file mode 100644
index 0000000000000000000000000000000000000000..63bb81ef91ce0d16b604f5606a6a340647b706ad
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.c
@@ -0,0 +1,98 @@
+/** @file
+ Kvmtool virtual memory map library.
+
+ Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/ArmLib.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
+
+// Number of Virtual Memory Map Descriptors
+#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS 5
+
+/**
+ Return the Virtual Memory Map of your platform
+
+ This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU
+ on your platform.
+
+ @param[out] VirtualMemoryMap Array of ARM_MEMORY_REGION_DESCRIPTOR
+ describing a Physical-to-Virtual Memory
+ mapping. This array must be ended by a
+ zero-filled entry. The allocated memory
+ will not be freed.
+
+**/
+VOID
+ArmVirtGetMemoryMap (
+ OUT ARM_MEMORY_REGION_DESCRIPTOR **VirtualMemoryMap
+ )
+{
+ ARM_MEMORY_REGION_DESCRIPTOR *VirtualMemoryTable;
+ UINTN Idx;
+ EFI_PHYSICAL_ADDRESS TopOfAddressSpace;
+
+ ASSERT (VirtualMemoryMap != NULL);
+
+ TopOfAddressSpace = LShiftU64 (1ULL, ArmGetPhysicalAddressBits ());
+
+ VirtualMemoryTable = (ARM_MEMORY_REGION_DESCRIPTOR*)
+ AllocatePages (
+ EFI_SIZE_TO_PAGES (
+ sizeof (ARM_MEMORY_REGION_DESCRIPTOR) *
+ MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS
+ )
+ );
+ if (VirtualMemoryTable == NULL) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: Error: Failed to Allocate Pages\n",
+ __FUNCTION__
+ ));
+ return;
+ }
+
+ Idx = 0;
+ // System DRAM
+ VirtualMemoryTable[Idx].PhysicalBase = PcdGet64 (PcdSystemMemoryBase);
+ VirtualMemoryTable[Idx].VirtualBase = VirtualMemoryTable[Idx].PhysicalBase;
+ VirtualMemoryTable[Idx].Length = PcdGet64 (PcdSystemMemorySize);
+ VirtualMemoryTable[Idx].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK;
+
+ // Peripheral space before DRAM
+ VirtualMemoryTable[++Idx].PhysicalBase = 0x0;
+ VirtualMemoryTable[Idx].VirtualBase = 0x0;
+ VirtualMemoryTable[Idx].Length = PcdGet64 (PcdSystemMemoryBase);
+ VirtualMemoryTable[Idx].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
+
+ // Peripheral space after DRAM
+ VirtualMemoryTable[++Idx].PhysicalBase = PcdGet64 (PcdSystemMemoryBase) +
+ PcdGet64 (PcdSystemMemorySize);
+ VirtualMemoryTable[Idx].VirtualBase = VirtualMemoryTable[Idx].PhysicalBase;
+ VirtualMemoryTable[Idx].Length = TopOfAddressSpace -
+ VirtualMemoryTable[Idx].PhysicalBase;
+ VirtualMemoryTable[Idx].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
+
+ // Map the FV region as normal executable memory
+ VirtualMemoryTable[++Idx].PhysicalBase = PcdGet64 (PcdFvBaseAddress);
+ VirtualMemoryTable[Idx].VirtualBase = VirtualMemoryTable[Idx].PhysicalBase;
+ VirtualMemoryTable[Idx].Length = FixedPcdGet32 (PcdFvSize);
+ VirtualMemoryTable[Idx].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK;
+
+ // End of Table
+ VirtualMemoryTable[++Idx].PhysicalBase = 0;
+ VirtualMemoryTable[Idx].VirtualBase = 0;
+ VirtualMemoryTable[Idx].Length = 0;
+ VirtualMemoryTable[Idx].Attributes = (ARM_MEMORY_REGION_ATTRIBUTES)0;
+
+ ASSERT((Idx + 1) <= MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS);
+
+ *VirtualMemoryMap = VirtualMemoryTable;
+}
diff --git a/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf b/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..4b0cf06e1e6950d57c397502a77abd8aa738254d
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf
@@ -0,0 +1,43 @@
+## @file
+# Kvmtool virtual memory map library.
+#
+# Copyright (c) 2018, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = KvmtoolVirtMemInfoLib
+ FILE_GUID = B752E953-394F-462C-811C-F8BE35C8C071
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = ArmVirtMemInfoLib
+
+[Sources]
+ KvmtoolVirtMemInfoLib.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ ArmVirtPkg/ArmVirtPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ ArmLib
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ MemoryAllocationLib
+ PcdLib
+
+[Pcd]
+ gArmTokenSpaceGuid.PcdFvBaseAddress
+ gArmTokenSpaceGuid.PcdSystemMemoryBase
+ gArmTokenSpaceGuid.PcdSystemMemorySize
+
+[FixedPcd]
+ gArmTokenSpaceGuid.PcdFvSize
+
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v5 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (4 preceding siblings ...)
2020-10-02 21:13 ` [PATCH v5 05/15] ArmVirtPkg: kvmtool platform memory map Sami Mujawar
@ 2020-10-02 21:14 ` Sami Mujawar
2020-10-02 21:14 ` [PATCH v5 07/15] MdeModulePkg: Fix constructor invocation ordering Sami Mujawar
` (9 subsequent siblings)
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:14 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, philmd, lersek,
Alexandru.Elisei, Andre.Przywara, Matteo.Carlini, Ben.Adderson,
nd
Kvmtool places the base address of the CFI flash in
the device tree it passes to UEFI. This library
parses the kvmtool device tree to read the CFI base
address and initialise the PCDs use by the NOR flash
driver and the variable storage.
UEFI takes ownership of the CFI flash hardware, and
exposes its functionality through the UEFI Runtime
Variable Service. Therefore, disable the device tree
node for the CFI flash used for storing the UEFI
variables, to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
---
Notes:
v5:
- Fixed minor ECC reported issues in file header. [Sami]
Ref: https://edk2.groups.io/g/devel/message/62160
v4:
- Added STATIC to local functions and updated comments [Sami]
to explain why DT node deferred to be disabled in
NorFlashPlatformInitialization()
- Use STATIC for local functions and explain why DT [Ard]
node for flash is disabled in
NorFlashPlatformInitialization()?
Ref: https://edk2.groups.io/g/devel/topic/75081477
v3:
- ASSERT is sufficient to test Locating [Ard]
gFdtClientProtocolGuid as DEPEX ensures that this is
guaranteed to succeed.
- Removed additional error handling based on review [Sami]
feedback.
- Fix confusion caused by use of macro MAX_FLASH_BANKS. [Philippe]
- Renamed MAX_FLASH_BANKS to MAX_FLASH_DEVICES. [Sami]
- Use macro to define block size for flash. [Philippe]
- Defined macro KVMTOOL_NOR_BLOCK_SIZE and also configured [Sami]
to reflect the correct block size 64KB.
- Disable the DT flash node used for UEFI variable storage [Sami]
as UEFI takes ownership of the flash device.
Ref: https://edk2.groups.io/g/devel/topic/74200914#60341
v2:
- Library to read CFI flash base address from DT and initialise [Sami]
PCDs used for NOR flash variables.
ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c | 336 ++++++++++++++++++++
ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | 50 +++
2 files changed, 386 insertions(+)
diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
new file mode 100644
index 0000000000000000000000000000000000000000..dce585b779a87dabde280cf4bbca5b828ceccda4
--- /dev/null
+++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
@@ -0,0 +1,336 @@
+/** @file
+ An instance of the NorFlashPlatformLib for Kvmtool platform.
+
+ Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ **/
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/NorFlashPlatformLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/FdtClient.h>
+
+/** Macro defining the NOR block size configured in Kvmtool.
+*/
+#define KVMTOOL_NOR_BLOCK_SIZE SIZE_64KB
+
+/** Macro defining the maximum number of Flash devices.
+*/
+#define MAX_FLASH_DEVICES 4
+
+/** Macro defining the cfi-flash label describing the UEFI variable store.
+*/
+#define LABEL_UEFI_VAR_STORE "System-firmware"
+
+STATIC NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_DEVICES];
+STATIC UINTN mNorFlashDeviceCount = 0;
+STATIC INT32 mUefiVarStoreNode = MAX_INT32;
+STATIC FDT_CLIENT_PROTOCOL *mFdtClient;
+
+/** This function performs platform specific actions to initialise
+ the NOR flash, if required.
+
+ @retval EFI_SUCCESS Success.
+**/
+EFI_STATUS
+NorFlashPlatformInitialization (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+
+ DEBUG ((DEBUG_INFO, "NorFlashPlatformInitialization\n"));
+
+ if ((mNorFlashDeviceCount > 0) && (mUefiVarStoreNode != MAX_INT32)) {
+ //
+ // UEFI takes ownership of the cfi-flash hardware, and exposes its
+ // functionality through the UEFI Runtime Variable Service. This means we
+ // need to disable it in the device tree to prevent the OS from attaching
+ // its device driver as well.
+ // Note: This library is loaded twice. First by FaultTolerantWriteDxe to
+ // setup the PcdFlashNvStorageFtw* and later by NorFlashDxe to provide the
+ // NorFlashPlatformLib interfaces. If the node is disabled when the library
+ // is first loaded, then during the subsequent loading of the library the
+ // call to FindNextCompatibleNode() from the library constructor skips the
+ // FDT node used for UEFI storage variable. Due to this we cannot setup the
+ // NOR flash device description i.e. mNorFlashDevices[].
+ // Since NorFlashPlatformInitialization() is called only by NorFlashDxe,
+ // we know it is safe to disable the node here.
+ //
+ Status = mFdtClient->SetNodeProperty (
+ mFdtClient,
+ mUefiVarStoreNode,
+ "status",
+ "disabled",
+ sizeof ("disabled")
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_WARN, "Failed to set cfi-flash status to 'disabled'\n"));
+ }
+ } else {
+ Status = EFI_NOT_FOUND;
+ DEBUG ((DEBUG_ERROR, "Flash device for UEFI variable storage not found\n"));
+ }
+
+ return Status;
+}
+
+/** Initialise Non volatile Flash storage variables.
+
+ @param [in] FlashDevice Pointer to the NOR Flash device.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_OUT_OF_RESOURCES Insufficient flash storage space.
+**/
+STATIC
+EFI_STATUS
+SetupVariableStore (
+ IN NOR_FLASH_DESCRIPTION * FlashDevice
+ )
+{
+ UINTN FlashRegion;
+ UINTN FlashNvStorageVariableBase;
+ UINTN FlashNvStorageFtwWorkingBase;
+ UINTN FlashNvStorageFtwSpareBase;
+ UINTN FlashNvStorageVariableSize;
+ UINTN FlashNvStorageFtwWorkingSize;
+ UINTN FlashNvStorageFtwSpareSize;
+
+ FlashNvStorageVariableSize = PcdGet32 (PcdFlashNvStorageVariableSize);
+ FlashNvStorageFtwWorkingSize = PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
+ FlashNvStorageFtwSpareSize = PcdGet32 (PcdFlashNvStorageFtwSpareSize);
+
+ if ((FlashNvStorageVariableSize == 0) ||
+ (FlashNvStorageFtwWorkingSize == 0) ||
+ (FlashNvStorageFtwSpareSize == 0)) {
+ DEBUG ((DEBUG_ERROR, "FlashNvStorage size not defined\n"));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Setup the variable store
+ FlashRegion = FlashDevice->DeviceBaseAddress;
+
+ FlashNvStorageVariableBase = FlashRegion;
+ FlashRegion += PcdGet32 (PcdFlashNvStorageVariableSize);
+
+ FlashNvStorageFtwWorkingBase = FlashRegion;
+ FlashRegion += PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
+
+ FlashNvStorageFtwSpareBase = FlashRegion;
+ FlashRegion += PcdGet32 (PcdFlashNvStorageFtwSpareSize);
+
+ if (FlashRegion > (FlashDevice->DeviceBaseAddress + FlashDevice->Size)) {
+ DEBUG ((DEBUG_ERROR, "Insufficient flash storage size\n"));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ PcdSet32S (
+ PcdFlashNvStorageVariableBase,
+ FlashNvStorageVariableBase
+ );
+
+ PcdSet32S (
+ PcdFlashNvStorageFtwWorkingBase,
+ FlashNvStorageFtwWorkingBase
+ );
+
+ PcdSet32S (
+ PcdFlashNvStorageFtwSpareBase,
+ FlashNvStorageFtwSpareBase
+ );
+
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageVariableBase = 0x%x\n",
+ FlashNvStorageVariableBase
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageVariableSize = 0x%x\n",
+ FlashNvStorageVariableSize
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageFtwWorkingBase = 0x%x\n",
+ FlashNvStorageFtwWorkingBase
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageFtwWorkingSize = 0x%x\n",
+ FlashNvStorageFtwWorkingSize
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageFtwSpareBase = 0x%x\n",
+ FlashNvStorageFtwSpareBase
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageFtwSpareSize = 0x%x\n",
+ FlashNvStorageFtwSpareSize
+ ));
+
+ return EFI_SUCCESS;
+}
+
+/** Return the Flash devices on the platform.
+
+ @param [out] NorFlashDescriptions Pointer to the Flash device description.
+ @param [out] Count Number of Flash devices.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_NOT_FOUND Flash device not found.
+**/
+EFI_STATUS
+NorFlashPlatformGetDevices (
+ OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
+ OUT UINT32 *Count
+ )
+{
+ if (mNorFlashDeviceCount > 0) {
+ *NorFlashDescriptions = mNorFlashDevices;
+ *Count = mNorFlashDeviceCount;
+ return EFI_SUCCESS;
+ }
+ return EFI_NOT_FOUND;
+}
+
+/** Entrypoint for NorFlashPlatformLib.
+
+ @param [in] ImageHandle The handle to the image.
+ @param [in] SystemTable Pointer to the System Table.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND Flash device not found.
+**/
+EFI_STATUS
+EFIAPI
+NorFlashPlatformLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE * SystemTable
+ )
+{
+ INT32 Node;
+ EFI_STATUS Status;
+ EFI_STATUS FindNodeStatus;
+ CONST UINT32 *Reg;
+ UINT32 PropSize;
+ UINT64 Base;
+ UINT64 Size;
+ UINTN UefiVarStoreIndex;
+ CONST CHAR8 *Label;
+ UINT32 LabelLen;
+
+ if (mNorFlashDeviceCount != 0) {
+ return EFI_SUCCESS;
+ }
+
+ Status = gBS->LocateProtocol (
+ &gFdtClientProtocolGuid,
+ NULL,
+ (VOID **)&mFdtClient
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ UefiVarStoreIndex = MAX_UINTN;
+ for (FindNodeStatus = mFdtClient->FindCompatibleNode (
+ mFdtClient,
+ "cfi-flash",
+ &Node
+ );
+ !EFI_ERROR (FindNodeStatus) &&
+ (mNorFlashDeviceCount < MAX_FLASH_DEVICES);
+ FindNodeStatus = mFdtClient->FindNextCompatibleNode (
+ mFdtClient,
+ "cfi-flash",
+ Node,
+ &Node
+ )) {
+ Status = mFdtClient->GetNodeProperty (
+ mFdtClient,
+ Node,
+ "label",
+ (CONST VOID **)&Label,
+ &LabelLen
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: GetNodeProperty ('label') failed (Status == %r)\n",
+ __FUNCTION__,
+ Status
+ ));
+ } else if (AsciiStrCmp (Label, LABEL_UEFI_VAR_STORE) == 0) {
+ UefiVarStoreIndex = mNorFlashDeviceCount;
+ mUefiVarStoreNode = Node;
+ }
+
+ Status = mFdtClient->GetNodeProperty (
+ mFdtClient,
+ Node,
+ "reg",
+ (CONST VOID **)&Reg,
+ &PropSize
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n",
+ __FUNCTION__, Status));
+ continue;
+ }
+
+ ASSERT ((PropSize % (4 * sizeof (UINT32))) == 0);
+
+ while ((PropSize >= (4 * sizeof (UINT32))) &&
+ (mNorFlashDeviceCount < MAX_FLASH_DEVICES)) {
+ Base = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[0]));
+ Size = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[2]));
+ Reg += 4;
+
+ PropSize -= 4 * sizeof (UINT32);
+
+ //
+ // Disregard any flash devices that overlap with the primary FV.
+ // The firmware is not updatable from inside the guest anyway.
+ //
+ if ((PcdGet64 (PcdFvBaseAddress) + PcdGet32 (PcdFvSize) > Base) &&
+ (Base + Size) > PcdGet64 (PcdFvBaseAddress)) {
+ continue;
+ }
+
+ DEBUG ((
+ DEBUG_INFO,
+ "NOR%d : Base = 0x%lx, Size = 0x%lx\n",
+ mNorFlashDeviceCount,
+ Base,
+ Size
+ ));
+
+ mNorFlashDevices[mNorFlashDeviceCount].DeviceBaseAddress = (UINTN)Base;
+ mNorFlashDevices[mNorFlashDeviceCount].RegionBaseAddress = (UINTN)Base;
+ mNorFlashDevices[mNorFlashDeviceCount].Size = (UINTN)Size;
+ mNorFlashDevices[mNorFlashDeviceCount].BlockSize = KVMTOOL_NOR_BLOCK_SIZE;
+ mNorFlashDeviceCount++;
+ }
+ } // for
+
+ // Setup the variable store in the last device
+ if (mNorFlashDeviceCount > 0) {
+ if (UefiVarStoreIndex == MAX_UINTN) {
+ // We did not find a label matching the UEFI Variable store. Default to
+ // using the last cfi-flash device as the variable store.
+ UefiVarStoreIndex = mNorFlashDeviceCount - 1;
+ mUefiVarStoreNode = Node;
+ }
+ if (mNorFlashDevices[UefiVarStoreIndex].DeviceBaseAddress != 0) {
+ return SetupVariableStore (&mNorFlashDevices[UefiVarStoreIndex]);
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
+
diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..b811e99156e2d55a95b4941e927a1006eb18a610
--- /dev/null
+++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
@@ -0,0 +1,50 @@
+## @file
+# Nor Flash library for Kvmtool.
+#
+# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = NorFlashKvmtoolLib
+ FILE_GUID = E75F07A1-B160-4893-BDD4-09E32FF847DC
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = NorFlashPlatformLib
+ CONSTRUCTOR = NorFlashPlatformLibConstructor
+
+[Sources.common]
+ NorFlashKvmtool.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec
+ ArmVirtPkg/ArmVirtPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ PcdLib
+ UefiBootServicesTableLib
+
+[Protocols]
+ gFdtClientProtocolGuid ## CONSUMES
+
+[Pcd]
+ gArmTokenSpaceGuid.PcdFvBaseAddress
+ gArmTokenSpaceGuid.PcdFvSize
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
+
+[Depex]
+ gFdtClientProtocolGuid
+
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v5 07/15] MdeModulePkg: Fix constructor invocation ordering
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (5 preceding siblings ...)
2020-10-02 21:14 ` [PATCH v5 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib Sami Mujawar
@ 2020-10-02 21:14 ` Sami Mujawar
2020-10-05 4:35 ` Wu, Hao A
2020-10-02 21:14 ` [PATCH v5 08/15] ArmVirtPkg: GUID Hob for 16550 UART base address Sami Mujawar
` (8 subsequent siblings)
15 siblings, 1 reply; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:14 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, jian.j.wang, hao.a.wu,
Alexandru.Elisei, Andre.Przywara, Matteo.Carlini, Ben.Adderson,
nd
The BaseSerialPortLib16550 library does not implement
a constructor. This prevents the correct constructor
invocation order for dependent libraries.
e.g. A PlatformHookLib (for the Serial Port) may have
a dependency on retrieving data from a Hob. A Hob
library implementation may configure its initial state
in the HobLib constructor. Since BaseSerialPortLib16550
does not implement a constructor, the Basetools do not
resolve the correct order for constructor invocation.
To fix this, add an empty constructor to the serial port
library BaseSerialPortLib16550.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
---
Notes:
v5:
- Fix function documentation to match doxygen style. [Sami]
Ref: https://edk2.groups.io/g/devel/message/62148
v4:
- No code change, resending patch with v4 series. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/75081484
MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c | 17 +++++++++++++++++
MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf | 3 +++
2 files changed, 20 insertions(+)
diff --git a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
index 9cb50dd80d5634ab2aa6d68bf5ca7fb891463eef..f10b5894663a979873427cffa84a37b3064c623e 100644
--- a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
+++ b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
@@ -4,6 +4,7 @@
(C) Copyright 2014 Hewlett-Packard Development Company, L.P.<BR>
Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2018, AMD Incorporated. All rights reserved.<BR>
+ Copyright (c) 2020, ARM Limited. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -1102,3 +1103,19 @@ SerialPortSetAttributes (
return RETURN_SUCCESS;
}
+/** Base Serial Port 16550 Library Constructor
+
+ @retval RETURN_SUCCESS Success.
+**/
+EFI_STATUS
+EFIAPI
+BaseSerialPortLib16550 (
+ VOID
+ )
+{
+ // Nothing to do here. This constructor is added to
+ // enable the chain of constructor invocation for
+ // dependent libraries.
+ return RETURN_SUCCESS;
+}
+
diff --git a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
index 8b4ae3f1d4ee1e2e9a8b81eab4c900541ce8cfb6..92b7a8b7896a305d2ce22589f8a9593618d37bb7 100644
--- a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+++ b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
@@ -2,6 +2,8 @@
# SerialPortLib instance for 16550 UART.
#
# Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2020, ARM Limited. All rights reserved.
+#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
##
@@ -14,6 +16,7 @@ [Defines]
MODULE_TYPE = BASE
VERSION_STRING = 1.1
LIBRARY_CLASS = SerialPortLib
+ CONSTRUCTOR = BaseSerialPortLib16550
[Packages]
MdePkg/MdePkg.dec
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [PATCH v5 07/15] MdeModulePkg: Fix constructor invocation ordering
2020-10-02 21:14 ` [PATCH v5 07/15] MdeModulePkg: Fix constructor invocation ordering Sami Mujawar
@ 2020-10-05 4:35 ` Wu, Hao A
0 siblings, 0 replies; 24+ messages in thread
From: Wu, Hao A @ 2020-10-05 4:35 UTC (permalink / raw)
To: Sami Mujawar, devel@edk2.groups.io
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, lersek@redhat.com,
Wang, Jian J, Alexandru.Elisei@arm.com, Andre.Przywara@arm.com,
Matteo.Carlini@arm.com, Ben.Adderson@arm.com, nd@arm.com
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Best Regards,
Hao Wu
> -----Original Message-----
> From: Sami Mujawar <sami.mujawar@arm.com>
> Sent: Saturday, October 3, 2020 5:14 AM
> To: devel@edk2.groups.io
> Cc: Sami Mujawar <sami.mujawar@arm.com>; ard.biesheuvel@arm.com;
> leif@nuviainc.com; lersek@redhat.com; Wang, Jian J <jian.j.wang@intel.com>;
> Wu, Hao A <hao.a.wu@intel.com>; Alexandru.Elisei@arm.com;
> Andre.Przywara@arm.com; Matteo.Carlini@arm.com; Ben.Adderson@arm.com;
> nd@arm.com
> Subject: [PATCH v5 07/15] MdeModulePkg: Fix constructor invocation ordering
>
> The BaseSerialPortLib16550 library does not implement a constructor. This
> prevents the correct constructor invocation order for dependent libraries.
> e.g. A PlatformHookLib (for the Serial Port) may have a dependency on
> retrieving data from a Hob. A Hob library implementation may configure its
> initial state in the HobLib constructor. Since BaseSerialPortLib16550 does not
> implement a constructor, the Basetools do not resolve the correct order for
> constructor invocation.
>
> To fix this, add an empty constructor to the serial port library
> BaseSerialPortLib16550.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> Acked-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
> ---
>
> Notes:
> v5:
> - Fix function documentation to match doxygen style. [Sami]
> Ref: https://edk2.groups.io/g/devel/message/62148
>
> v4:
> - No code change, resending patch with v4 series. [Sami]
> Ref: https://edk2.groups.io/g/devel/topic/75081484
>
> MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c |
> 17 +++++++++++++++++
> MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf | 3
> +++
> 2 files changed, 20 insertions(+)
>
> diff --git
> a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
> b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
> index
> 9cb50dd80d5634ab2aa6d68bf5ca7fb891463eef..f10b5894663a979873427cffa8
> 4a37b3064c623e 100644
> --- a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
> +++ b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550
> +++ .c
> @@ -4,6 +4,7 @@
> (C) Copyright 2014 Hewlett-Packard Development Company, L.P.<BR>
> Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> Copyright (c) 2018, AMD Incorporated. All rights reserved.<BR>
> + Copyright (c) 2020, ARM Limited. All rights reserved.
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -1102,3 +1103,19 @@ SerialPortSetAttributes (
> return RETURN_SUCCESS;
> }
>
> +/** Base Serial Port 16550 Library Constructor
> +
> + @retval RETURN_SUCCESS Success.
> +**/
> +EFI_STATUS
> +EFIAPI
> +BaseSerialPortLib16550 (
> + VOID
> + )
> +{
> + // Nothing to do here. This constructor is added to
> + // enable the chain of constructor invocation for
> + // dependent libraries.
> + return RETURN_SUCCESS;
> +}
> +
> diff --git
> a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
> b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
> index
> 8b4ae3f1d4ee1e2e9a8b81eab4c900541ce8cfb6..92b7a8b7896a305d2ce22589f
> 8a9593618d37bb7 100644
> ---
> a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
> +++ b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550
> +++ .inf
> @@ -2,6 +2,8 @@
> # SerialPortLib instance for 16550 UART.
> #
> # Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> +# Copyright (c) 2020, ARM Limited. All rights reserved.
> +#
> # SPDX-License-Identifier: BSD-2-Clause-Patent # ## @@ -14,6 +16,7 @@
> [Defines]
> MODULE_TYPE = BASE
> VERSION_STRING = 1.1
> LIBRARY_CLASS = SerialPortLib
> + CONSTRUCTOR = BaseSerialPortLib16550
>
> [Packages]
> MdePkg/MdePkg.dec
> --
> 'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v5 08/15] ArmVirtPkg: GUID Hob for 16550 UART base address
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (6 preceding siblings ...)
2020-10-02 21:14 ` [PATCH v5 07/15] MdeModulePkg: Fix constructor invocation ordering Sami Mujawar
@ 2020-10-02 21:14 ` Sami Mujawar
2020-10-02 21:14 ` [PATCH v5 09/15] ArmVirtPkg: 16550 UART Platform hook library Sami Mujawar
` (7 subsequent siblings)
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:14 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Ben.Adderson, nd
Introduce a new GUID Hob gEarly16550UartBaseAddressGuid
to cache the base address of the 16550 UART, for when
PCD access is not available.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
---
Notes:
v5:
- No code changes, resending patch with v5 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/62149
v4:
- No code change, resending patch with v4 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/61720
ArmVirtPkg/ArmVirtPkg.dec | 2 ++
ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h | 22 ++++++++++++++++++++
2 files changed, 24 insertions(+)
diff --git a/ArmVirtPkg/ArmVirtPkg.dec b/ArmVirtPkg/ArmVirtPkg.dec
index 08ddd68a863eb82778fa7a92b20ac1bff271f5e5..bf82f7f1f3f2a0ce545d87fa93350f56de78328b 100644
--- a/ArmVirtPkg/ArmVirtPkg.dec
+++ b/ArmVirtPkg/ArmVirtPkg.dec
@@ -1,6 +1,7 @@
#/** @file
#
# Copyright (c) 2014, Linaro Limited. All rights reserved.
+# Copyright (c) 2020, ARM Limited. All rights reserved.
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -30,6 +31,7 @@ [LibraryClasses]
[Guids.common]
gArmVirtTokenSpaceGuid = { 0x0B6F5CA7, 0x4F53, 0x445A, { 0xB7, 0x6E, 0x2E, 0x36, 0x5B, 0x80, 0x63, 0x66 } }
gEarlyPL011BaseAddressGuid = { 0xB199DEA9, 0xFD5C, 0x4A84, { 0x80, 0x82, 0x2F, 0x41, 0x70, 0x78, 0x03, 0x05 } }
+ gEarly16550UartBaseAddressGuid = { 0xea67ca3e, 0x1f54, 0x436b, { 0x97, 0x88, 0xd4, 0xeb, 0x29, 0xc3, 0x42, 0x67 } }
gArmVirtVariableGuid = { 0x50bea1e5, 0xa2c5, 0x46e9, { 0x9b, 0x3a, 0x59, 0x59, 0x65, 0x16, 0xb0, 0x0a } }
diff --git a/ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h b/ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h
new file mode 100644
index 0000000000000000000000000000000000000000..6b76f37a27dac03d6749f31a03e8026023231056
--- /dev/null
+++ b/ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h
@@ -0,0 +1,22 @@
+/** @file
+ GUID for the HOB that caches the base address of the 16550 serial port, for
+ when PCD access is not available.
+
+ Copyright (c) 2020, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef EARLY_16550_UART_BASE_ADDRESS_H__
+#define EARLY_16550_UART_BASE_ADDRESS_H__
+
+#define EARLY_16550_UART_BASE_ADDRESS_GUID { \
+ 0xea67ca3e, 0x1f54, 0x436b, { \
+ 0x97, 0x88, 0xd4, 0xeb, 0x29, 0xc3, 0x42, 0x67 \
+ } \
+ }
+
+extern EFI_GUID gEarly16550UartBaseAddressGuid;
+
+#endif // EARLY_16550_UART_BASE_ADDRESS_H__
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v5 09/15] ArmVirtPkg: 16550 UART Platform hook library
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (7 preceding siblings ...)
2020-10-02 21:14 ` [PATCH v5 08/15] ArmVirtPkg: GUID Hob for 16550 UART base address Sami Mujawar
@ 2020-10-02 21:14 ` Sami Mujawar
2020-10-02 21:14 ` [PATCH v5 10/15] ArmVirtPkg: Add Kvmtool Platform Pei Lib Sami Mujawar
` (6 subsequent siblings)
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:14 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Ben.Adderson, nd
The BaseSerialPort16550 library invokes the
PlatformHookSerialPortInitialize() implemented as
part of the PlatformHook library, to perform platform
specific initialization required to enable use of the
16550 device. The BaseSerialPort16550 library uses
the PcdSerialRegisterBase to obtain the base address
of the UART for MMIO operations.
Some VMMs like Kvmtool provide the base address of
the console serial port in the platform device tree.
This patch introduces two instances of the Platform
Hook library:
1. EarlyFdt16550SerialPortHookLib - parses the
platform device tree to extract the base
address of the 16550 UART and update the PCD
PcdSerialRegisterBase.
2. Fdt16550SerialPortHookLib - reads the GUID
Hob gEarly16550UartBaseAddressGuid (that caches
the base address of the 16550 UART discovered
during early stages) and updates the PCD
PcdSerialRegisterBase.
Note:
a. The PCD PcdSerialRegisterBase is configured
as PatchableInModule.
b. A separate patch introduces a PlatformPeiLib
that trampolines the 16550 UART base address
from the Pcd PcdSerialRegisterBase to the
GUID Hob gEarly16550UartBaseAddressGuid.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
---
Notes:
v5:
- No code changes, resending patch with v5 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/62142
v4:
- No code change, resending patch with v4 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/61721
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c | 138 ++++++++++++++++++++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf | 36 +++++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c | 57 ++++++++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf | 39 ++++++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni | 14 ++
5 files changed, 284 insertions(+)
diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c
new file mode 100644
index 0000000000000000000000000000000000000000..4e97302d01dc5692e046fb901663373828b532ee
--- /dev/null
+++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c
@@ -0,0 +1,138 @@
+/** @file
+ Early Platform Hook Library instance for 16550 Uart.
+
+ Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Uefi.h>
+
+#include <Pi/PiBootMode.h>
+#include <Pi/PiHob.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PlatformHookLib.h>
+#include <libfdt.h>
+
+/** Get the UART base address of the console serial-port from the DT.
+
+ This function fetches the node referenced in the "stdout-path"
+ property of the "chosen" node and returns the base address of
+ the console UART.
+
+ @param [in] Fdt Pointer to a Flattened Device Tree (Fdt).
+ @param [out] SerialConsoleAddress If success, contains the base address
+ of the console serial-port.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND Console serial-port info not found in DT.
+ @retval EFI_INVALID_PARAMETER Invalid parameter.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+GetSerialConsolePortAddress (
+ IN CONST VOID *Fdt,
+ OUT UINT64 *SerialConsoleAddress
+ )
+{
+ CONST CHAR8 *Prop;
+ INT32 PropSize;
+ CONST CHAR8 *Path;
+ INT32 PathLen;
+ INT32 ChosenNode;
+ INT32 SerialConsoleNode;
+ INT32 Len;
+ CONST CHAR8 *NodeStatus;
+ CONST UINT64 *RegProperty;
+
+ if ((Fdt == NULL) || (fdt_check_header (Fdt) != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // The "chosen" node resides at the the root of the DT. Fetch it.
+ ChosenNode = fdt_path_offset (Fdt, "/chosen");
+ if (ChosenNode < 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ Prop = fdt_getprop (Fdt, ChosenNode, "stdout-path", &PropSize);
+ if (PropSize < 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ // Determine the actual path length, as a colon terminates the path.
+ Path = ScanMem8 (Prop, ':', PropSize);
+ if (Path == NULL) {
+ PathLen = AsciiStrLen (Prop);
+ } else {
+ PathLen = Path - Prop;
+ }
+
+ // Aliases cannot start with a '/', so it must be the actual path.
+ if (Prop[0] == '/') {
+ SerialConsoleNode = fdt_path_offset_namelen (Fdt, Prop, PathLen);
+ } else {
+ // Lookup the alias, as this contains the actual path.
+ Path = fdt_get_alias_namelen (Fdt, Prop, PathLen);
+ if (Path == NULL) {
+ return EFI_NOT_FOUND;
+ }
+ SerialConsoleNode = fdt_path_offset (Fdt, Path);
+ }
+
+ NodeStatus = fdt_getprop (Fdt, SerialConsoleNode, "status", &Len);
+ if ((NodeStatus != NULL) && (AsciiStrCmp (NodeStatus, "okay") != 0)) {
+ return EFI_NOT_FOUND;
+ }
+
+ RegProperty = fdt_getprop (Fdt, SerialConsoleNode, "reg", &Len);
+ if (Len != 16) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *SerialConsoleAddress = fdt64_to_cpu (ReadUnaligned64 (RegProperty));
+
+ return EFI_SUCCESS;
+}
+
+/** Platform hook to retrieve the 16550 UART base address from the platform
+ Device tree and store it in PcdSerialRegisterBase.
+
+ @retval RETURN_SUCCESS Success.
+ @retval RETURN_INVALID_PARAMETER A parameter was invalid.
+ @retval RETURN_NOT_FOUND Serial port information not found.
+
+**/
+RETURN_STATUS
+EFIAPI
+PlatformHookSerialPortInitialize (
+ VOID
+ )
+{
+ RETURN_STATUS Status;
+ VOID *DeviceTreeBase;
+ UINT64 SerialConsoleAddress;
+
+ if (PcdGet64 (PcdSerialRegisterBase) != 0) {
+ return RETURN_SUCCESS;
+ }
+
+ DeviceTreeBase = (VOID *)(UINTN)PcdGet64 (PcdDeviceTreeInitialBaseAddress);
+ if (DeviceTreeBase == NULL) {
+ return RETURN_NOT_FOUND;
+ }
+
+ Status = GetSerialConsolePortAddress (DeviceTreeBase, &SerialConsoleAddress);
+ if (RETURN_ERROR (Status)) {
+ return Status;
+ }
+
+ return (EFI_STATUS)PcdSet64S (PcdSerialRegisterBase, SerialConsoleAddress);
+}
+
diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..007a45eca2a622118044b527a5bc6403b706608a
--- /dev/null
+++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
@@ -0,0 +1,36 @@
+## @file
+# Early Platform Hook Library instance for 16550 Uart.
+#
+# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = EarlyFdt16550SerialPortHookLib
+ MODULE_UNI_FILE = Fdt16550SerialPortHookLib.uni
+ FILE_GUID = FFB19961-79CC-4684-84A8-C31B0A2BBE82
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PlatformHookLib|SEC PEI_CORE PEIM
+
+[Sources]
+ EarlyFdt16550SerialPortHookLib.c
+
+[LibraryClasses]
+ BaseLib
+ PcdLib
+ FdtLib
+ HobLib
+
+[Packages]
+ ArmVirtPkg/ArmVirtPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[Pcd]
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c
new file mode 100644
index 0000000000000000000000000000000000000000..1100c12aef361e39cf78f0c3e4e14cc2feecfcee
--- /dev/null
+++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c
@@ -0,0 +1,57 @@
+/** @file
+ Platform Hook Library instance for 16550 Uart.
+
+ Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Uefi.h>
+
+#include <Pi/PiBootMode.h>
+#include <Pi/PiHob.h>
+
+#include <Guid/Early16550UartBaseAddress.h>
+#include <Guid/Fdt.h>
+#include <Guid/FdtHob.h>
+
+#include <Library/BaseLib.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PlatformHookLib.h>
+
+/** Platform hook to retrieve the 16550 UART base address from the GUID Hob
+ that caches the UART base address from early boot stage and store it in
+ PcdSerialRegisterBase.
+
+ @retval RETURN_SUCCESS Success.
+ @retval RETURN_NOT_FOUND Serial Port information not found.
+
+**/
+RETURN_STATUS
+EFIAPI
+PlatformHookSerialPortInitialize (
+ VOID
+ )
+{
+ VOID *Hob;
+ UINT64 *UartBase;
+
+ if (PcdGet64 (PcdSerialRegisterBase) != 0) {
+ return RETURN_SUCCESS;
+ }
+
+ Hob = GetFirstGuidHob (&gEarly16550UartBaseAddressGuid);
+ if ((Hob == NULL) || (GET_GUID_HOB_DATA_SIZE (Hob) != sizeof (*UartBase))) {
+ return RETURN_NOT_FOUND;
+ }
+
+ UartBase = GET_GUID_HOB_DATA (Hob);
+ if ((UINTN)*UartBase == 0) {
+ return RETURN_NOT_FOUND;
+ }
+
+ return (RETURN_STATUS)PcdSet64S (PcdSerialRegisterBase, (UINTN)*UartBase);
+}
+
diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..ba789ca69041b647a4a881b03110ff853df89f65
--- /dev/null
+++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
@@ -0,0 +1,39 @@
+## @file
+# Platform Hook Library instance for 16550 Uart.
+#
+# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = Fdt16550SerialPortHookLib
+ MODULE_UNI_FILE = Fdt16550SerialPortHookLib.uni
+ FILE_GUID = C6DFD3F0-179D-4376-89A5-F641A2E7EFB5
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PlatformHookLib|DXE_CORE DXE_DRIVER UEFI_DRIVER DXE_RUNTIME_DRIVER UEFI_APPLICATION
+ CONSTRUCTOR = PlatformHookSerialPortInitialize
+
+[Sources]
+ Fdt16550SerialPortHookLib.c
+
+[LibraryClasses]
+ BaseLib
+ PcdLib
+ HobLib
+
+[Packages]
+ ArmVirtPkg/ArmVirtPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
+
+[Guids]
+ gEarly16550UartBaseAddressGuid
+
diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni
new file mode 100644
index 0000000000000000000000000000000000000000..19a61a4a03244321bda7c88cd26128b44bfd46b4
--- /dev/null
+++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni
@@ -0,0 +1,14 @@
+// /** @file
+// Platform Hook Library instance for 16550 Uart.
+//
+//
+// Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+#string STR_MODULE_ABSTRACT #language en-US "Platform Hook Library instance for 16550 Uart."
+
+#string STR_MODULE_DESCRIPTION #language en-US "Platform Hook Library instance for 16550 Uart."
+
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v5 10/15] ArmVirtPkg: Add Kvmtool Platform Pei Lib
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (8 preceding siblings ...)
2020-10-02 21:14 ` [PATCH v5 09/15] ArmVirtPkg: 16550 UART Platform hook library Sami Mujawar
@ 2020-10-02 21:14 ` Sami Mujawar
2020-10-02 21:14 ` [PATCH v5 11/15] ArmVirtPkg: Support for kvmtool virtual platform Sami Mujawar
` (5 subsequent siblings)
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:14 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Ben.Adderson, nd
The PlatformPeim() in the PlatformPeiLib is invoked
by the PrePiMain() and provides the platform an
opportunity to setup the plaform specific HOBs.
This PlatfromPeiLib initialises the Kvmtool platform
HOBs like the Fdt, 16550BaseAddress, etc.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
---
Notes:
v5:
- Fixed minor ECC reported issues in file header. [Sami]
Ref: https://edk2.groups.io/g/devel/message/62143
v4:
- No code change, resending patch with v4 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/61722
ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c | 79 ++++++++++++++++++++
ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf | 49 ++++++++++++
2 files changed, 128 insertions(+)
diff --git a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c
new file mode 100644
index 0000000000000000000000000000000000000000..255eb0599e4ad73874282eef8422e0b0d8eab2ac
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c
@@ -0,0 +1,79 @@
+/** @file
+ Kvmtool platform PEI library.
+
+ Copyright (c) 2020, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiPei.h>
+
+#include <Guid/Early16550UartBaseAddress.h>
+#include <Guid/FdtHob.h>
+
+#include <Library/MemoryAllocationLib.h>
+#include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PeiServicesLib.h>
+#include <libfdt.h>
+
+/** Initialise Platform HOBs
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_OUT_OF_RESOURCES Out of resources.
+**/
+EFI_STATUS
+EFIAPI
+PlatformPeim (
+ VOID
+ )
+{
+ VOID *Base;
+ VOID *NewBase;
+ UINTN FdtSize;
+ UINTN FdtPages;
+ UINT64 *FdtHobData;
+ UINT64 *UartHobData;
+
+ Base = (VOID*)(UINTN)PcdGet64 (PcdDeviceTreeInitialBaseAddress);
+ if ((Base == NULL) || (fdt_check_header (Base) != 0)) {
+ ASSERT (0);
+ return EFI_INVALID_PARAMETER;
+ }
+
+ FdtSize = fdt_totalsize (Base) + PcdGet32 (PcdDeviceTreeAllocationPadding);
+ FdtPages = EFI_SIZE_TO_PAGES (FdtSize);
+ NewBase = AllocatePages (FdtPages);
+ if (NewBase == NULL) {
+ ASSERT (0);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ fdt_open_into (Base, NewBase, EFI_PAGES_TO_SIZE (FdtPages));
+
+ FdtHobData = BuildGuidHob (&gFdtHobGuid, sizeof (*FdtHobData));
+ if (FdtHobData == NULL) {
+ ASSERT (0);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ *FdtHobData = (UINTN)NewBase;
+
+ UartHobData = BuildGuidHob (
+ &gEarly16550UartBaseAddressGuid,
+ sizeof (*UartHobData)
+ );
+ if (UartHobData == NULL) {
+ ASSERT (0);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ *UartHobData = PcdGet64 (PcdSerialRegisterBase);
+
+ BuildFvHob (PcdGet64 (PcdFvBaseAddress), PcdGet32 (PcdFvSize));
+
+ return EFI_SUCCESS;
+}
diff --git a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..f201aee50cdd07f9424c620152e240ef50715f88
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
@@ -0,0 +1,49 @@
+## @file
+# Kvmtool platform PEI library.
+#
+# Copyright (c) 2020, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = PlatformPeiLib
+ FILE_GUID = 21073FB3-BA6F-43EB-83F0-4A840C648165
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = KvmtoolPlatformPeiLib
+
+[Sources]
+ KvmtoolPlatformPeiLib.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ ArmVirtPkg/ArmVirtPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ HobLib
+ FdtLib
+ PcdLib
+ PeiServicesLib
+
+[FixedPcd]
+ gArmTokenSpaceGuid.PcdFvSize
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
+
+[Pcd]
+ gArmTokenSpaceGuid.PcdFvBaseAddress
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
+
+[Guids]
+ gFdtHobGuid
+ gEarly16550UartBaseAddressGuid
+
+[Depex]
+ gEfiPeiMemoryDiscoveredPpiGuid
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v5 11/15] ArmVirtPkg: Support for kvmtool virtual platform
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (9 preceding siblings ...)
2020-10-02 21:14 ` [PATCH v5 10/15] ArmVirtPkg: Add Kvmtool Platform Pei Lib Sami Mujawar
@ 2020-10-02 21:14 ` Sami Mujawar
2020-10-02 21:14 ` [PATCH v5 12/15] ArmVirtPkg: Package dependency for MC146818 RTC Sami Mujawar
` (4 subsequent siblings)
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:14 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Ben.Adderson, nd
Kvmtool is a virtual machine manager that enables hosting
KVM guests. Kvmtool emulates certain devices like serial
port, RTC, etc. essentially providing a virtual platform.
This patch adds support for kvmtool virtual platform.
Following is a brief description of the firmware
implementation choices:
- Serial Port: 16550 UART
On some platforms the 16550 UART is interfaced using
PCI. Therefore, the 16550 Serial port library is
dependent on the PCI library. The 16550 UART driver
checks the Device ID represented using the PCD
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo
to determine if the UART is behind PCI.
If the Device ID is 0xFF then the serial 16550 UART
is not behind PCI.
On Kvmtool the Serial 16550 UART is not behind PCI,
and therefore a combination of BasePciLibPciExpress
and BasePciExpressLib is used to satisfy the PCI
library dependency.
The PcdSerialPciDeviceInfo is also set to 0xFF to
indicate that the Serial 16550 UART is not behind
PCI. The PCD PcdSerialUseMmio is also set to TRUE
to indicate MMIO accesses are required for the
UART registers.
Additionally two instances of PlatformHookLibs are
provided EarlyFdt16550SerialPortHookLib and
Fdt16550SerialPortHookLib to patch the
PcdSerialRegisterBase so that BaseSerialPortLib16550
and retrieve the base address of the 16550 UART.
- Dependency order for Flash
FaultTolerantWriteDxe makes use of PCDs (e.g.
PcdFlashNvStorageFtwSpareBase64 etc.), which in
case of kvmtool will be evaluated based on the CFI
flash base address read from the DT. These variables
are populated in the NorFlashPlatformLib loaded by
ArmVeNorFlashDxe.
This results in a dependency issue with
FaultTolerantWriteDxe. To resolve this make the
NorFlashPlatformLib as a library dependency for
FaultTolerantWriteDxe.
- RTC Controller
A separate patch updates the MC146818 RTC controller
driver to support MMIO accesses.
A KvmtoolRtcFdtClientLib has been introduced to
extract the base addresses of the RTC controller
from the platform device tree and map the RTC
register space as Runtime Memory.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
---
Notes:
v5:
- No code changes, resending patch with v5 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/62161
v4:
- Updated to use XIPFLAGS to set no-jump-tables. Removed [Sami]
Networking and EBC support in this patch series. These
features will be added later as separate patches.
- Use XIPFLAGS to set no-jump-tables and use .inc files [Ard]
for NetworkPkg modules.
Ref: https://edk2.groups.io/g/devel/topic/75081494
v3:
- Use correct terminology. kvmtool is *not* an emulator. [Ard]
- Updated patch series to reflect correct terminology. [Sami]
- Don't define bits and pieces you cannot make use of. [Ard]
- Updated workspace to remove unsupported features. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/74200917#59552
v2:
- Updates to reflect review comments and support [Sami]
for latest features emulated by kvmtool e.g. CFI.
v1:
- Add support for Kvmtool emulated platform [Sami]
- Add more justification for platform and [Laszlo]
document platform maintainer.
Ref: https://edk2.groups.io/g/devel/topic/30915279#30693
ArmVirtPkg/ArmVirtKvmTool.dsc | 321 ++++++++++++++++++++
ArmVirtPkg/ArmVirtKvmTool.fdf | 234 ++++++++++++++
2 files changed, 555 insertions(+)
diff --git a/ArmVirtPkg/ArmVirtKvmTool.dsc b/ArmVirtPkg/ArmVirtKvmTool.dsc
new file mode 100644
index 0000000000000000000000000000000000000000..bf008be50fcb96bbe4f559f0b165a7a555b4cc1f
--- /dev/null
+++ b/ArmVirtPkg/ArmVirtKvmTool.dsc
@@ -0,0 +1,321 @@
+# @file
+# Workspace file for KVMTool virtual platform.
+#
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ PLATFORM_NAME = ArmVirtKvmTool
+ PLATFORM_GUID = 4CB2C61E-FA32-4130-8E37-54ABC71A1A43
+ PLATFORM_VERSION = 0.1
+ DSC_SPECIFICATION = 0x0001001B
+!ifdef $(EDK2_OUT_DIR)
+ OUTPUT_DIRECTORY = $(EDK2_OUT_DIR)
+!else
+ OUTPUT_DIRECTORY = Build/ArmVirtKvmTool-$(ARCH)
+!endif
+ SUPPORTED_ARCHITECTURES = AARCH64|ARM
+ BUILD_TARGETS = DEBUG|RELEASE
+ SKUID_IDENTIFIER = DEFAULT
+ FLASH_DEFINITION = ArmVirtPkg/ArmVirtKvmTool.fdf
+
+!include ArmVirtPkg/ArmVirt.dsc.inc
+
+[LibraryClasses.common]
+ ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
+ ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
+
+ # Virtio Support
+ VirtioLib|OvmfPkg/Library/VirtioLib/VirtioLib.inf
+ VirtioMmioDeviceLib|OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceLib.inf
+
+ ArmPlatformLib|ArmPlatformPkg/Library/ArmPlatformLibNull/ArmPlatformLibNull.inf
+ ArmVirtMemInfoLib|ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf
+
+ TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
+ NorFlashPlatformLib|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
+
+ CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+
+ # BDS Libraries
+ UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
+ PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
+ BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
+
+ CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
+ FrameBufferBltLib|MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf
+
+ FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
+
+ PciPcdProducerLib|ArmVirtPkg/Library/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
+ PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf
+ PciHostBridgeLib|ArmVirtPkg/Library/FdtPciHostBridgeLib/FdtPciHostBridgeLib.inf
+
+ TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
+ AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
+
+ PlatformPeiLib|ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
+
+ PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+ PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
+ SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+
+[LibraryClasses.common.SEC, LibraryClasses.common.PEI_CORE, LibraryClasses.common.PEIM]
+ PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+ PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
+ SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+
+[LibraryClasses.common.UEFI_DRIVER]
+ UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
+
+[BuildOptions]
+ *_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
+ #
+ # We need to avoid jump tables in SEC and BASE modules, so that the PE/COFF
+ # self-relocation code itself is guaranteed to be position independent.
+ #
+ GCC:*_*_*_CC_XIPFLAGS = -fno-jump-tables
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+
+[PcdsFeatureFlag.common]
+ ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
+ # It could be set FALSE to save size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
+
+ # Use MMIO for accessing RTC controller registers.
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|TRUE
+
+[PcdsFixedAtBuild.common]
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F
+
+ gArmPlatformTokenSpaceGuid.PcdCoreCount|1
+
+!if $(ARCH) == AARCH64
+ gArmTokenSpaceGuid.PcdVFPEnabled|1
+!endif
+
+ gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x2800
+
+ # Size of the region used by UEFI in permanent memory (Reserved 64MB)
+ gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000
+
+ #
+ # TTY Terminal Type
+ # 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8, 4-TTYTERM
+ gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4
+
+ #
+ # ARM Virtual Architectural Timer -- fetch frequency from KVM
+ #
+ gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|0
+
+ # Use MMIO for accessing Serial port registers.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
+
+ #
+ # The maximum physical I/O addressability of the processor, set with
+ # BuildCpuHob().
+ #
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16
+
+[PcdsPatchableInModule.common]
+ #
+ # This will be overridden in the code
+ #
+ gArmTokenSpaceGuid.PcdSystemMemoryBase|0x0
+ gArmTokenSpaceGuid.PcdSystemMemorySize|0x0
+
+ #
+ # The device tree base address is handed off by kvmtool.
+ # We are booting from RAM using the Linux kernel boot protocol,
+ # x0 will point to the DTB image in memory.
+ #
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
+
+ gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
+ gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x0
+
+[PcdsDynamicDefault.common]
+ gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|3
+
+ gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0
+ gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|0x0
+ gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|0x0
+ gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|0x0
+
+ #
+ # ARM General Interrupt Controller
+ #
+ gArmTokenSpaceGuid.PcdGicDistributorBase|0x0
+ gArmTokenSpaceGuid.PcdGicRedistributorsBase|0x0
+ gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0x0
+
+ #
+ # Set video resolution for boot options and for text setup.
+ # PlatformDxe can set the former at runtime.
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480
+
+ ## Force DTB
+ gArmVirtTokenSpaceGuid.PcdForceNoAcpi|TRUE
+
+ # Setup Flash storage variables
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x40000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x40000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x40000
+
+ ## RTC Register address in MMIO space.
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0
+
+################################################################################
+#
+# Components Section - list of all EDK II Modules needed by this Platform
+#
+################################################################################
+[Components.common]
+ #
+ # PEI Phase modules
+ #
+ ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf {
+ <LibraryClasses>
+ ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
+ LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
+ HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
+ PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
+ MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
+ }
+
+ #
+ # DXE
+ #
+ MdeModulePkg/Core/Dxe/DxeMain.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ }
+ MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+
+ #
+ # Architectural Protocols
+ #
+ ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
+ NULL|EmbeddedPkg/Library/NvVarStoreFormattedLib/NvVarStoreFormattedLib.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+ }
+
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf {
+ <LibraryClasses>
+ NULL|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
+ }
+
+ MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
+ MdeModulePkg/Universal/Metronome/Metronome.inf
+ PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf {
+ <LibraryClasses>
+ NULL|ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
+ }
+
+ MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+ MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+ ArmPkg/Drivers/TimerDxe/TimerDxe.inf {
+ <LibraryClasses>
+ NULL|ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.inf
+ }
+
+ ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+
+ MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+
+ #
+ # Platform Driver
+ #
+ ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
+ ArmVirtPkg/VirtioFdtDxe/VirtioFdtDxe.inf
+ ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
+ ArmVirtPkg/HighMemDxe/HighMemDxe.inf
+ OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+ OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
+ OvmfPkg/VirtioNetDxe/VirtioNet.inf
+ OvmfPkg/VirtioRngDxe/VirtioRng.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning + UDF filesystem
+ #
+ MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+ FatPkg/EnhancedFatDxe/Fat.inf
+ MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
+
+ #
+ # Bds
+ #
+ MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf {
+ <LibraryClasses>
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+ MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ MdeModulePkg/Logo/LogoDxe.inf
+ MdeModulePkg/Application/UiApp/UiApp.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
+ }
+
+ #
+ # SCSI Bus and Disk Driver
+ #
+ MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+ MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
diff --git a/ArmVirtPkg/ArmVirtKvmTool.fdf b/ArmVirtPkg/ArmVirtKvmTool.fdf
new file mode 100644
index 0000000000000000000000000000000000000000..ebc82c5bd53cf98bc829c57dc0946b7a5854ca6c
--- /dev/null
+++ b/ArmVirtPkg/ArmVirtKvmTool.fdf
@@ -0,0 +1,234 @@
+#
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into the Flash Device Image. Each FD section
+# defines one flash "device" image. A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash" image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.KVMTOOL_EFI]
+BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
+# The size in bytes of the FLASH Device
+Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
+ErasePolarity = 1
+
+# This one is tricky, it must be: BlockSize * NumBlocks = Size
+BlockSize = 0x00001000
+NumBlocks = 0x200
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+#
+# Implement the Linux kernel header layout so that the loader will identify
+# it as something bootable, and execute it with a FDT pointer in x0 or r2.
+# This area will be reused to store a copy of the FDT so round it up to 32 KB.
+#
+0x00000000|0x00008000
+DATA = {
+!if $(ARCH) == AARCH64
+ 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
+ 0xff, 0x1f, 0x00, 0x14, # code1: b 0x8000
+ 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
+ 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res4
+ 0x41, 0x52, 0x4d, 0x64, # magic: "ARM\x64"
+ 0x00, 0x00, 0x00, 0x00 # res5
+!else
+ 0x08, 0x10, 0x4f, 0xe2, # adr r1, .
+ 0x02, 0x00, 0xa0, 0xe1, # mov r0, r2 (DTB)
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+
+ 0xf6, 0x1f, 0x00, 0xea, # b 0x8000
+ 0x18, 0x28, 0x6f, 0x01, # magic
+ 0x00, 0x00, 0x00, 0x00, # start
+ 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
+ 0x01, 0x02, 0x03, 0x04 # endiannness flag
+!endif
+}
+
+0x00008000|0x001f8000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file. This section also defines order the components and modules are positioned
+# within the image. The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+
+[FV.FvMain]
+FvNameGuid = 8A91C08E-7D9D-4933-84D6-901D26D0766E
+BlockSize = 0x40
+NumBlocks = 0 # This FV gets compressed so make it just big enough
+FvAlignment = 16 # FV alignment and FV attributes setting.
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF MdeModulePkg/Core/Dxe/DxeMain.inf
+ INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
+ INF ArmVirtPkg/VirtioFdtDxe/VirtioFdtDxe.inf
+ INF ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
+ INF ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
+ INF ArmVirtPkg/HighMemDxe/HighMemDxe.inf
+
+ #
+ # PI DXE Drivers producing Architectural Protocols (EFI Services)
+ #
+ INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+ INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
+
+ INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
+
+ INF MdeModulePkg/Universal/Metronome/Metronome.inf
+ INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
+
+ INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ #
+ # Multiple Console IO support
+ #
+ INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+ INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+ INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+ INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+ INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning + UDF filesystem
+ #
+ INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ INF FatPkg/EnhancedFatDxe/Fat.inf
+ INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+ INF MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
+
+ #
+ # Platform Driver
+ #
+ INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+ INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
+ INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
+ INF OvmfPkg/VirtioRngDxe/VirtioRng.inf
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ INF ShellPkg/Application/Shell/Shell.inf
+ INF ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf
+
+ #
+ # Bds
+ #
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ INF MdeModulePkg/Application/UiApp/UiApp.inf
+
+ #
+ # SCSI Bus and Disk Driver
+ #
+ INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+ INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+
+ #
+ # TianoCore logo (splash screen)
+ #
+ INF MdeModulePkg/Logo/LogoDxe.inf
+
+ #
+ # Ramdisk support
+ #
+ INF MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe.inf
+
+[FV.FVMAIN_COMPACT]
+FvAlignment = 16
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF RuleOverride = SELF_RELOC ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
+
+ FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+ SECTION FV_IMAGE = FVMAIN
+ }
+ }
+
+!include ArmVirtRules.fdf.inc
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v5 12/15] ArmVirtPkg: Package dependency for MC146818 RTC
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (10 preceding siblings ...)
2020-10-02 21:14 ` [PATCH v5 11/15] ArmVirtPkg: Support for kvmtool virtual platform Sami Mujawar
@ 2020-10-02 21:14 ` Sami Mujawar
2020-10-02 21:14 ` [PATCH v5 13/15] ArmVirtPkg: Add kvmtool to package dictionary Sami Mujawar
` (3 subsequent siblings)
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:14 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Matteo.Carlini,
Ben.Adderson, nd
Kvmtool emulates a MC146818 RTC controller in the
MMIO space. To support this the MC146818 RTC driver
PcatRealTimeClockRuntimeDxe has been updated to
support MMIO accesses. PCDs for RTC Index and
Target register base addresses in the MMIO space
have been introduced. The KvmtoolRtcFdtClientLib
reads the MC146818 RTC MMIO base address region
from the Kvmtool device tree and updates the
Index and Target register PCDs.
As these PCDs are defined in PcAtChipsetPkg.dec,
this patch updates the CI script to add this
dependency.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
---
Notes:
v5:
- Resolved conflict in ArmVirtPkg/ArmVirtPkg.ci.yaml [Sami]
file header message after re-basing with master.
Ref: https://edk2.groups.io/g/devel/message/62151
v4:
- No code changes, resending patch with v4 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/61724
ArmVirtPkg/ArmVirtPkg.ci.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/ArmVirtPkg/ArmVirtPkg.ci.yaml b/ArmVirtPkg/ArmVirtPkg.ci.yaml
index 8b2c0305c1756d9048ab4df316c3eba79a0ad2a4..bc44e95952e105876680247b97982a7c6d36b1a5 100644
--- a/ArmVirtPkg/ArmVirtPkg.ci.yaml
+++ b/ArmVirtPkg/ArmVirtPkg.ci.yaml
@@ -6,6 +6,8 @@
#
# Copyright (c) Microsoft Corporation
# Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2020, ARM Limited. All rights reserved.
+#
# SPDX-License-Identifier: BSD-2-Clause-Patent
##
{
@@ -50,6 +52,7 @@
"OvmfPkg/OvmfPkg.dec",
"EmbeddedPkg/EmbeddedPkg.dec",
"ArmPlatformPkg/ArmPlatformPkg.dec",
+ "PcAtChipsetPkg/PcAtChipsetPkg.dec",
"SecurityPkg/SecurityPkg.dec",
"ShellPkg/ShellPkg.dec" #Is this ok?
],
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v5 13/15] ArmVirtPkg: Add kvmtool to package dictionary
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (11 preceding siblings ...)
2020-10-02 21:14 ` [PATCH v5 12/15] ArmVirtPkg: Package dependency for MC146818 RTC Sami Mujawar
@ 2020-10-02 21:14 ` Sami Mujawar
2020-10-02 21:14 ` [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section Sami Mujawar
` (2 subsequent siblings)
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:14 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Matteo.Carlini,
Ben.Adderson, nd
Kvmtool is a virtual machine manager that can be used
to launch guest VMs. Support for Kvmtool virtual
platform has been added to ArmVirtPkg.
Add kvmtool to the ArmVirtPkg dictionary to prevent
the CI Spell check plugin from failing.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
---
Notes:
v5:
- No code changes, resending patch with v5 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/62150
v4:
- No code change, resending patch with v4 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/61725
ArmVirtPkg/ArmVirtPkg.ci.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/ArmVirtPkg/ArmVirtPkg.ci.yaml b/ArmVirtPkg/ArmVirtPkg.ci.yaml
index bc44e95952e105876680247b97982a7c6d36b1a5..5f427e57233e316af653de911c62b5ffa9c5e9ea 100644
--- a/ArmVirtPkg/ArmVirtPkg.ci.yaml
+++ b/ArmVirtPkg/ArmVirtPkg.ci.yaml
@@ -114,7 +114,8 @@
"unbootable",
"virt's",
"werror",
- "xenio"
+ "xenio",
+ "kvmtool"
], # words to extend to the dictionary for this package
"IgnoreStandardPaths": [], # Standard Plugin defined paths that should be ignore
"AdditionalIncludePaths": [] # Additional paths to spell check (wildcards supported)
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (12 preceding siblings ...)
2020-10-02 21:14 ` [PATCH v5 13/15] ArmVirtPkg: Add kvmtool to package dictionary Sami Mujawar
@ 2020-10-02 21:14 ` Sami Mujawar
2020-10-05 20:51 ` [EXTERNAL] [edk2-devel] " Bret Barkelew
2020-10-02 21:14 ` [PATCH v5 15/15] Maintainer.txt: Add Kvmtool platform reviewer Sami Mujawar
2020-10-16 17:27 ` [PATCH v5 00/15] Kvmtool guest firmware support for Arm Ard Biesheuvel
15 siblings, 1 reply; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:14 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Matteo.Carlini,
Ben.Adderson, nd
The EDKII Core CI reports spelling error for XIPFLAGS. The
XIPFLAGS are typically used to specify XIP options to the
compiler. e.g. GCC:*_*_*_CC_XIPFLAGS = -fno-jump-tables
Add 'XIPFLAGS' to "words" section in cspell.base.yaml file
to avoid spelling check error.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
---
Notes:
v5:
- No code changes, resending patch with v5 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/62162
.pytool/Plugin/SpellCheck/cspell.base.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/.pytool/Plugin/SpellCheck/cspell.base.yaml b/.pytool/Plugin/SpellCheck/cspell.base.yaml
index 1ce5f6991104b83e41e769299b23cb3fa74c46e9..ad6f7ac06ad18efcd4ab9c2346356dfd6885d827 100644
--- a/.pytool/Plugin/SpellCheck/cspell.base.yaml
+++ b/.pytool/Plugin/SpellCheck/cspell.base.yaml
@@ -178,5 +178,6 @@
"vcruntimed",
"ucrtd",
"msvcrtd",
+ "XIPFLAGS"
]
}
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [EXTERNAL] [edk2-devel] [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section
2020-10-02 21:14 ` [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section Sami Mujawar
@ 2020-10-05 20:51 ` Bret Barkelew
2020-10-06 7:58 ` Sami Mujawar
0 siblings, 1 reply; 24+ messages in thread
From: Bret Barkelew @ 2020-10-05 20:51 UTC (permalink / raw)
To: devel@edk2.groups.io, sami.mujawar@arm.com
Cc: Sami Mujawar, ard.biesheuvel@arm.com, leif@nuviainc.com,
lersek@redhat.com, Matteo.Carlini@arm.com, Ben.Adderson@arm.com,
nd@arm.com
[-- Attachment #1: Type: text/plain, Size: 2126 bytes --]
I’m assuming this is used across multiple packages?
If so,
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
- Bret
From: Sami Mujawar via groups.io<mailto:sami.mujawar=arm.com@groups.io>
Sent: Friday, October 2, 2020 2:14 PM
To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>
Cc: Sami Mujawar<mailto:sami.mujawar@arm.com>; ard.biesheuvel@arm.com<mailto:ard.biesheuvel@arm.com>; leif@nuviainc.com<mailto:leif@nuviainc.com>; lersek@redhat.com<mailto:lersek@redhat.com>; Matteo.Carlini@arm.com<mailto:Matteo.Carlini@arm.com>; Ben.Adderson@arm.com<mailto:Ben.Adderson@arm.com>; nd@arm.com<mailto:nd@arm.com>
Subject: [EXTERNAL] [edk2-devel] [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section
The EDKII Core CI reports spelling error for XIPFLAGS. The
XIPFLAGS are typically used to specify XIP options to the
compiler. e.g. GCC:*_*_*_CC_XIPFLAGS = -fno-jump-tables
Add 'XIPFLAGS' to "words" section in cspell.base.yaml file
to avoid spelling check error.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
---
Notes:
v5:
- No code changes, resending patch with v5 series. [Sami]
Ref: https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F62162&data=02%7C01%7CBret.Barkelew%40microsoft.com%7C09b7528fca35489670af08d867182f71%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637372700863446978&sdata=VZm3wyCHnm9oV1HTuripLVGwPxvrLtmuXTDJk68ueCo%3D&reserved=0
.pytool/Plugin/SpellCheck/cspell.base.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/.pytool/Plugin/SpellCheck/cspell.base.yaml b/.pytool/Plugin/SpellCheck/cspell.base.yaml
index 1ce5f6991104b83e41e769299b23cb3fa74c46e9..ad6f7ac06ad18efcd4ab9c2346356dfd6885d827 100644
--- a/.pytool/Plugin/SpellCheck/cspell.base.yaml
+++ b/.pytool/Plugin/SpellCheck/cspell.base.yaml
@@ -178,5 +178,6 @@
"vcruntimed",
"ucrtd",
"msvcrtd",
+ "XIPFLAGS"
]
}
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
[-- Attachment #2: Type: text/html, Size: 5074 bytes --]
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [EXTERNAL] [edk2-devel] [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section
2020-10-05 20:51 ` [EXTERNAL] [edk2-devel] " Bret Barkelew
@ 2020-10-06 7:58 ` Sami Mujawar
2020-10-06 18:18 ` Bret Barkelew
0 siblings, 1 reply; 24+ messages in thread
From: Sami Mujawar @ 2020-10-06 7:58 UTC (permalink / raw)
To: Bret Barkelew, devel@edk2.groups.io
Cc: Ard Biesheuvel, leif@nuviainc.com, lersek@redhat.com,
Matteo Carlini, Ben Adderson, nd
[-- Attachment #1: Type: text/plain, Size: 2853 bytes --]
Hi Bret,
Please find my response inline marked [SAMI].
Regards,
Sami Mujawar
From: Bret Barkelew <Bret.Barkelew@microsoft.com>
Sent: 05 October 2020 09:51 PM
To: devel@edk2.groups.io; Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Sami Mujawar <Sami.Mujawar@arm.com>; Ard Biesheuvel <Ard.Biesheuvel@arm.com>; leif@nuviainc.com; lersek@redhat.com; Matteo Carlini <Matteo.Carlini@arm.com>; Ben Adderson <Ben.Adderson@arm.com>; nd <nd@arm.com>
Subject: RE: [EXTERNAL] [edk2-devel] [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section
I'm assuming this is used across multiple packages?
[SAMI] This flag is also used in CryptoPkg\Library\OpensslLib. [/SAMI]
If so,
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com<mailto:bret.barkelew@microsoft.com>>
- Bret
From: Sami Mujawar via groups.io<mailto:sami.mujawar=arm.com@groups.io>
Sent: Friday, October 2, 2020 2:14 PM
To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>
Cc: Sami Mujawar<mailto:sami.mujawar@arm.com>; ard.biesheuvel@arm.com<mailto:ard.biesheuvel@arm.com>; leif@nuviainc.com<mailto:leif@nuviainc.com>; lersek@redhat.com<mailto:lersek@redhat.com>; Matteo.Carlini@arm.com<mailto:Matteo.Carlini@arm.com>; Ben.Adderson@arm.com<mailto:Ben.Adderson@arm.com>; nd@arm.com<mailto:nd@arm.com>
Subject: [EXTERNAL] [edk2-devel] [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section
The EDKII Core CI reports spelling error for XIPFLAGS. The
XIPFLAGS are typically used to specify XIP options to the
compiler. e.g. GCC:*_*_*_CC_XIPFLAGS = -fno-jump-tables
Add 'XIPFLAGS' to "words" section in cspell.base.yaml file
to avoid spelling check error.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com<mailto:sami.mujawar@arm.com>>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com<mailto:ard.biesheuvel@arm.com>>
---
Notes:
v5:
- No code changes, resending patch with v5 series. [Sami]
Ref: https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F62162&data=02%7C01%7CBret.Barkelew%40microsoft.com%7C09b7528fca35489670af08d867182f71%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637372700863446978&sdata=VZm3wyCHnm9oV1HTuripLVGwPxvrLtmuXTDJk68ueCo%3D&reserved=0
.pytool/Plugin/SpellCheck/cspell.base.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/.pytool/Plugin/SpellCheck/cspell.base.yaml b/.pytool/Plugin/SpellCheck/cspell.base.yaml
index 1ce5f6991104b83e41e769299b23cb3fa74c46e9..ad6f7ac06ad18efcd4ab9c2346356dfd6885d827 100644
--- a/.pytool/Plugin/SpellCheck/cspell.base.yaml
+++ b/.pytool/Plugin/SpellCheck/cspell.base.yaml
@@ -178,5 +178,6 @@
"vcruntimed",
"ucrtd",
"msvcrtd",
+ "XIPFLAGS"
]
}
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
[-- Attachment #2: Type: text/html, Size: 7477 bytes --]
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [EXTERNAL] [edk2-devel] [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section
2020-10-06 7:58 ` Sami Mujawar
@ 2020-10-06 18:18 ` Bret Barkelew
0 siblings, 0 replies; 24+ messages in thread
From: Bret Barkelew @ 2020-10-06 18:18 UTC (permalink / raw)
To: Sami Mujawar, devel@edk2.groups.io
Cc: Ard Biesheuvel, leif@nuviainc.com, lersek@redhat.com,
Matteo Carlini, Ben Adderson, nd
[-- Attachment #1: Type: text/plain, Size: 3929 bytes --]
If it’s only used in that package, I would suggest adding it to the CryptoPkg.ci.yaml file instead. If it’s likely to be used in multiple packages, the current patch looks good.
- Bret
From: Sami Mujawar<mailto:Sami.Mujawar@arm.com>
Sent: Tuesday, October 6, 2020 12:58 AM
To: Bret Barkelew<mailto:Bret.Barkelew@microsoft.com>; devel@edk2.groups.io<mailto:devel@edk2.groups.io>
Cc: Ard Biesheuvel<mailto:Ard.Biesheuvel@arm.com>; leif@nuviainc.com<mailto:leif@nuviainc.com>; lersek@redhat.com<mailto:lersek@redhat.com>; Matteo Carlini<mailto:Matteo.Carlini@arm.com>; Ben Adderson<mailto:Ben.Adderson@arm.com>; nd<mailto:nd@arm.com>
Subject: RE: [EXTERNAL] [edk2-devel] [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section
Hi Bret,
Please find my response inline marked [SAMI].
Regards,
Sami Mujawar
From: Bret Barkelew <Bret.Barkelew@microsoft.com>
Sent: 05 October 2020 09:51 PM
To: devel@edk2.groups.io; Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Sami Mujawar <Sami.Mujawar@arm.com>; Ard Biesheuvel <Ard.Biesheuvel@arm.com>; leif@nuviainc.com; lersek@redhat.com; Matteo Carlini <Matteo.Carlini@arm.com>; Ben Adderson <Ben.Adderson@arm.com>; nd <nd@arm.com>
Subject: RE: [EXTERNAL] [edk2-devel] [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section
I’m assuming this is used across multiple packages?
[SAMI] This flag is also used in CryptoPkg\Library\OpensslLib. [/SAMI]
If so,
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com<mailto:bret.barkelew@microsoft.com>>
- Bret
From: Sami Mujawar via groups.io<mailto:sami.mujawar=arm.com@groups.io>
Sent: Friday, October 2, 2020 2:14 PM
To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>
Cc: Sami Mujawar<mailto:sami.mujawar@arm.com>; ard.biesheuvel@arm.com<mailto:ard.biesheuvel@arm.com>; leif@nuviainc.com<mailto:leif@nuviainc.com>; lersek@redhat.com<mailto:lersek@redhat.com>; Matteo.Carlini@arm.com<mailto:Matteo.Carlini@arm.com>; Ben.Adderson@arm.com<mailto:Ben.Adderson@arm.com>; nd@arm.com<mailto:nd@arm.com>
Subject: [EXTERNAL] [edk2-devel] [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section
The EDKII Core CI reports spelling error for XIPFLAGS. The
XIPFLAGS are typically used to specify XIP options to the
compiler. e.g. GCC:*_*_*_CC_XIPFLAGS = -fno-jump-tables
Add 'XIPFLAGS' to "words" section in cspell.base.yaml file
to avoid spelling check error.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com<mailto:sami.mujawar@arm.com>>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com<mailto:ard.biesheuvel@arm.com>>
---
Notes:
v5:
- No code changes, resending patch with v5 series. [Sami]
Ref: https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F62162&data=02%7C01%7CBret.Barkelew%40microsoft.com%7C09b7528fca35489670af08d867182f71%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637372700863446978&sdata=VZm3wyCHnm9oV1HTuripLVGwPxvrLtmuXTDJk68ueCo%3D&reserved=0<https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F62162&data=02%7C01%7CBret.Barkelew%40microsoft.com%7C43091a0c9321408bda2f08d869cd96a0%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637375679014714932&sdata=QNjLf4Z3kGn%2BWU3qyvZ4AV6gLn9hiZW7GYJWky9DMsE%3D&reserved=0>
.pytool/Plugin/SpellCheck/cspell.base.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/.pytool/Plugin/SpellCheck/cspell.base.yaml b/.pytool/Plugin/SpellCheck/cspell.base.yaml
index 1ce5f6991104b83e41e769299b23cb3fa74c46e9..ad6f7ac06ad18efcd4ab9c2346356dfd6885d827 100644
--- a/.pytool/Plugin/SpellCheck/cspell.base.yaml
+++ b/.pytool/Plugin/SpellCheck/cspell.base.yaml
@@ -178,5 +178,6 @@
"vcruntimed",
"ucrtd",
"msvcrtd",
+ "XIPFLAGS"
]
}
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
[-- Attachment #2: Type: text/html, Size: 8413 bytes --]
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 15/15] Maintainer.txt: Add Kvmtool platform reviewer
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (13 preceding siblings ...)
2020-10-02 21:14 ` [PATCH v5 14/15] .python/SpellCheck: Add 'XIPFLAGS' to "words" section Sami Mujawar
@ 2020-10-02 21:14 ` Sami Mujawar
2020-10-16 17:27 ` [PATCH v5 00/15] Kvmtool guest firmware support for Arm Ard Biesheuvel
15 siblings, 0 replies; 24+ messages in thread
From: Sami Mujawar @ 2020-10-02 21:14 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, michael.d.kinney,
Matteo.Carlini, Ben.Adderson, nd
Kvmtool is a virtual machine manager that can be used
to launch guest partitions. It additionally emulates
some hardware components e.g. RTC, CFI etc. essentially
providing a virtual platform for a guest operating
system (OS) to run.
A standards-based OS would need UEFI firmware support
for the Kvmtool virtual platform, for which additional
modules are added to ArmVirtPkg.
Adding myself as reviewer for these modules as
advised on mailing list discussion at
- https://edk2.groups.io/g/devel/topic/30915279#30693
- https://edk2.groups.io/g/devel/topic/74200911#59650
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
---
Notes:
v5:
- No changes, resending patch with v5 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/62152
v4:
- No change, resending patch with v4 series. [Sami]
Ref: https://edk2.groups.io/g/devel/message/61726
v3:
- Updated Maintainers.txt to add reviewer for Kvmtool platform. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/74200911#59650
Maintainers.txt | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Maintainers.txt b/Maintainers.txt
index 6a22a14796358ab79a0e0c913b2dcfc7c3132ee9..34cff64def958fdb199b3ccf3d2bc55acdd15604 100644
--- a/Maintainers.txt
+++ b/Maintainers.txt
@@ -157,6 +157,16 @@ F: ArmVirtPkg/XenPlatformHasAcpiDtDxe/
F: ArmVirtPkg/XenioFdtDxe/
R: Julien Grall <julien@xen.org>
+ArmVirtPkg: Kvmtool emulated platform support
+F: ArmVirtPkg/ArmVirtKvmTool.*
+F: ArmVirtPkg/KvmtoolPlatformDxe/
+F: ArmVirtPkg/Library/Fdt16550SerialPortHookLib/
+F: ArmVirtPkg/Library/KvmtoolPlatformPeiLib/
+F: ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/
+F: ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/
+F: ArmVirtPkg/Library/NorFlashKvmtoolLib/
+R: Sami Mujawar <sami.mujawar@arm.com>
+
BaseTools
F: BaseTools/
W: https://github.com/tianocore/tianocore.github.io/wiki/BaseTools
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [PATCH v5 00/15] Kvmtool guest firmware support for Arm
2020-10-02 21:13 [PATCH v5 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (14 preceding siblings ...)
2020-10-02 21:14 ` [PATCH v5 15/15] Maintainer.txt: Add Kvmtool platform reviewer Sami Mujawar
@ 2020-10-16 17:27 ` Ard Biesheuvel
15 siblings, 0 replies; 24+ messages in thread
From: Ard Biesheuvel @ 2020-10-16 17:27 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, philmd, ray.ni, michael.d.kinney, liming.gao, lersek,
Alexandru.Elisei, Andre.Przywara, Matteo.Carlini, Ben.Adderson,
nd
On 10/2/20 11:13 PM, Sami Mujawar wrote:
> Kvmtool is a virtual machine manager that can be used to launch
> guest partitions. Kvmtool additionally supports emulation of
> hardware like the RTC, CFI etc. essentially providing an
> emulated platform for a Guest OS to run.
>
> To boot a standards-based OS one would need UEFI. In this case
> it is UEFI at EL1 or guest/virtual firmware.
>
> Kvmtool has been enhanced to enable launching of KVM guests with
> UEFI support e.g. CFI emulation has been added to store UEFI
> variables, etc. These changes have been merged in the kvmtool
> repository at:
> https://git.kernel.org/pub/scm/linux/kernel/git/will/kvmtool.git
>
> This patch series updates the following:
> * addresses the review feedback from v4 series to drop the
> unnecessary whitespace and header changes in
> - [PATCH v5 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver
> * Minor doxygen style fixes to file headers reported by ECC tool in
> - [PATCH v5 02/15] ArmVirtPkg: Add Kvmtool RTC Fdt Client Library
> - [PATCH v5 04/15] ArmVirtPkg: Add kvmtool platform driver
> - [PATCH v5 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib
> - [PATCH v5 10/15] ArmVirtPkg: Add Kvmtool Platform Pei Lib
> * Minor fix for ECC error "5007: There should be no initialization
> of a variable as part of its declaration" and doxygen style fixes
> to file headers in
> - [PATCH v5 05/15] ArmVirtPkg: kvmtool platform memory map
> * Minor fix in function documentation to match doxygen style in
> - [PATCH v5 07/15] MdeModulePkg: Fix constructor invocation ordering
>
> The changes for the v4 series can be seen at:
> https://github.com/samimujawar/edk2/tree/299_kvmtool_plat_support_v5
>
> Sami Mujawar (15):
> PcAtChipsetPkg: Add MMIO Support to RTC driver
> ArmVirtPkg: Add Kvmtool RTC Fdt Client Library
> ArmPlatformPkg: Dynamic flash variable base
> ArmVirtPkg: Add kvmtool platform driver
> ArmVirtPkg: kvmtool platform memory map
> ArmVirtPkg: Add Kvmtool NOR flash lib
> MdeModulePkg: Fix constructor invocation ordering
> ArmVirtPkg: GUID Hob for 16550 UART base address
> ArmVirtPkg: 16550 UART Platform hook library
> ArmVirtPkg: Add Kvmtool Platform Pei Lib
> ArmVirtPkg: Support for kvmtool virtual platform
> ArmVirtPkg: Package dependency for MC146818 RTC
> ArmVirtPkg: Add kvmtool to package dictionary
> .python/SpellCheck: Add 'XIPFLAGS' to "words" section
> Maintainer.txt: Add Kvmtool platform reviewer
>
Merged as #1025
Thanks all,
^ permalink raw reply [flat|nested] 24+ messages in thread