From: "Leif Lindholm" <leif@nuviainc.com>
To: Meenakshi Aggarwal <meenakshi.aggarwal@oss.nxp.com>
Cc: ard.biesheuvel@arm.com, michael.d.kinney@intel.com,
devel@edk2.groups.io, v.sethi@nxp.com
Subject: Re: [edk2-platforms v3 0/6] Enable USB support on LS1046aFrwy board
Date: Fri, 9 Oct 2020 17:04:49 +0100 [thread overview]
Message-ID: <20201009160449.GF5623@vanye> (raw)
In-Reply-To: <1602256744-12582-1-git-send-email-meenakshi.aggarwal@oss.nxp.com>
On Fri, Oct 09, 2020 at 20:49:01 +0530, Meenakshi Aggarwal wrote:
> This patch set adds GPIO Library.
> Gpio Library is required to set muxing to enable USB controller.
>
>
> Changes in v3:
> - Incorporated review comments
>
> Changes in v2:
> - Modified GpioLib as per review comments
> - Prepared separate patch for SCFG enablement
> - Prepared sepaarte patch for USB errata implementation
>
> Meenakshi Aggarwal (6):
> Silicon/NXP: Add GPIO Library support.
> Platform/NXP/LS1046aFrwyPkg: MUX changes for USB
> Silicon/NXP: Add SCFG support for Chassis2
> Silicon/NXP: Implement USB Errata Workarounds
> Silicon/NXP/LS1046A: Apply USB errata workarounds
> LS1046aFrwy: Enable USB support for LS1046AFRWY board.
For the series:
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Pushed as e3461bfe3d3f..325619f738d7.
> Silicon/NXP/NxpQoriqLs.dec | 9 +
> Silicon/NXP/LS1046A/LS1046A.dsc.inc | 9 +
> Silicon/NXP/NxpQoriqLs.dsc.inc | 2 +
> Platform/NXP/LS1046aFrwyPkg/LS1046aFrwyPkg.dsc | 2 +
> Platform/NXP/LS1046aFrwyPkg/LS1046aFrwyPkg.fdf | 13 ++
> .../Library/ArmPlatformLib/ArmPlatformLib.inf | 1 +
> .../NXP/Chassis2/Library/ChassisLib/ChassisLib.inf | 2 +
> Silicon/NXP/LS1046A/Library/SocLib/SocLib.inf | 1 +
> Silicon/NXP/Library/GpioLib/GpioLib.inf | 39 ++++
> Silicon/NXP/Chassis2/Include/Chassis.h | 112 +++++++++++
> Silicon/NXP/Chassis2/Library/ChassisLib/Erratum.h | 23 +++
> Silicon/NXP/Include/Library/ChassisLib.h | 62 ++++++
> Silicon/NXP/Include/Library/GpioLib.h | 110 +++++++++++
> Silicon/NXP/LS1046A/Include/Soc.h | 2 +
> .../Library/ArmPlatformLib/ArmPlatformLib.c | 21 ++
> .../NXP/Chassis2/Library/ChassisLib/ChassisLib.c | 63 ++++++
> Silicon/NXP/Chassis2/Library/ChassisLib/Erratum.c | 165 ++++++++++++++++
> Silicon/NXP/LS1046A/Library/SocLib/SocLib.c | 65 ++++++
> Silicon/NXP/Library/GpioLib/GpioLib.c | 219 +++++++++++++++++++++
> 19 files changed, 920 insertions(+)
> mode change 100644 => 100755 Platform/NXP/LS1046aFrwyPkg/LS1046aFrwyPkg.dsc
> mode change 100644 => 100755 Platform/NXP/LS1046aFrwyPkg/LS1046aFrwyPkg.fdf
> create mode 100644 Silicon/NXP/Library/GpioLib/GpioLib.inf
> create mode 100644 Silicon/NXP/Chassis2/Library/ChassisLib/Erratum.h
> create mode 100644 Silicon/NXP/Include/Library/GpioLib.h
> create mode 100644 Silicon/NXP/Chassis2/Library/ChassisLib/Erratum.c
> create mode 100644 Silicon/NXP/Library/GpioLib/GpioLib.c
>
> --
> 1.9.1
>
next prev parent reply other threads:[~2020-10-09 16:04 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-15 16:28 [edk2-platforms 0/4] Enable USB support on LS1046aFrwy board Meenakshi Aggarwal
2020-09-15 16:29 ` [edk2-platforms 1/4] Silicon/NXP: Add GPIO driver support Meenakshi Aggarwal
2020-09-25 11:12 ` Leif Lindholm
2020-09-15 16:29 ` [edk2-platforms 2/4] Platform/NXP/LS1046aFrwyPkg: GPIO mux changes for USB Meenakshi Aggarwal
2020-09-25 11:17 ` Leif Lindholm
2020-09-15 16:29 ` [edk2-platforms 3/4] Silicon/NXP: Implement USB Errata Meenakshi Aggarwal
2020-09-25 11:47 ` Leif Lindholm
2020-09-15 16:29 ` [edk2-platforms 4/4] LS1046aFrwy: Enable USB support for LS1046AFRWY board Meenakshi Aggarwal
2020-09-25 11:47 ` Leif Lindholm
2020-10-07 16:10 ` [edk2-platforms v2 0/6] Enable USB support on LS1046aFrwy board Meenakshi Aggarwal
2020-10-07 16:10 ` [edk2-platforms v2 1/6] Silicon/NXP: Add GPIO Library support Meenakshi Aggarwal
2020-10-08 12:10 ` Leif Lindholm
2020-10-07 16:10 ` [edk2-platforms v2 2/6] Platform/NXP/LS1046aFrwyPkg: MUX changes for USB Meenakshi Aggarwal
2020-10-08 12:13 ` Leif Lindholm
2020-10-07 16:10 ` [edk2-platforms v2 3/6] Silicon/NXP: Add SCFG support for Chassis2 Meenakshi Aggarwal
2020-10-08 12:15 ` Leif Lindholm
2020-10-07 16:10 ` [edk2-platforms v2 4/6] Silicon/NXP: Implement USB Errata Workarounds Meenakshi Aggarwal
2020-10-08 12:18 ` Leif Lindholm
2020-10-07 16:10 ` [edk2-platforms v2 5/6] Silicon/NXP/LS1046A: Apply USB errata workarounds Meenakshi Aggarwal
2020-10-08 12:05 ` Leif Lindholm
2020-10-07 16:10 ` [edk2-platforms v2 6/6] LS1046aFrwy: Enable USB support for LS1046AFRWY board Meenakshi Aggarwal
2020-10-09 15:19 ` [edk2-platforms v3 0/6] Enable USB support on LS1046aFrwy board Meenakshi Aggarwal
2020-10-09 15:19 ` [edk2-platforms v3 4/6] Silicon/NXP: Implement USB Errata Workarounds Meenakshi Aggarwal
2020-10-09 15:19 ` [edk2-platforms v3 5/6] Silicon/NXP/LS1046A: Apply USB errata workarounds Meenakshi Aggarwal
2020-10-09 16:02 ` Leif Lindholm
2020-10-09 15:19 ` [edk2-platforms v3 6/6] LS1046aFrwy: Enable USB support for LS1046AFRWY board Meenakshi Aggarwal
2020-10-09 16:04 ` Leif Lindholm [this message]
2020-10-08 12:20 ` [edk2-platforms v2 0/6] Enable USB support on LS1046aFrwy board Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201009160449.GF5623@vanye \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox