* [PATCH 0/7] Enable emmc2 controller rpi4
@ 2020-12-14 23:23 Jeremy Linton
2020-12-14 23:23 ` [PATCH 1/7] Platform/RaspberryPi: Update VPU mailbox constants Jeremy Linton
` (6 more replies)
0 siblings, 7 replies; 20+ messages in thread
From: Jeremy Linton @ 2020-12-14 23:23 UTC (permalink / raw)
To: devel
Cc: ard.biesheuvel, leif, pete, andrey.warkentin,
samer.el-haj-mahmoud, Jeremy Linton
The rpi4 has a secondary sd controller at offset
0xfe340000. This controller appears to be a mostly
compliant SDHCI controller (a newer more bugfree
arasan?). So we should be able to bind the existing
arasan driver to it. This allows the rpi4 to boot
with its normal emmc2->sd card, arasan->wifi
configuration that is described in the linux DT.
To do this, it appears we should also be tweaking
some of the expansion gpios, and probably telling
the firmware to power everything up. To do that we
sync the vpu mailbox headers, with a more recent
list of the mailbox commands, then extend the rpi
firmware dxe to support some futher gpio/power
commands. Once that is complete we tweak the arasan
driver to use an alternate register base, add a
workaround for a known clock crossing bug, and
set the card voltage. As well as a number of other
tweaks.
Of note, this set does _NOT_ change the HID/CID's
and add the additional emmc2 controller to the
DSDT table. That remains an open item waiting
for a proper set of device ids.
Jeremy Linton (7):
Platform/RaspberryPi: Update VPU mailbox constants
Platform/RaspberryPi: Add further mailbox helpers
Platform/RaspberryPi: Split MMC register defintions
Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config
Platform/RaspberryPi/Arasan: Select the correct base frequency
Platform/RaspberryPi: Power up sd, and tweak GPIOs
Platform/RaspberryPi: Correct device path removal.
.../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c | 131 ++++++++---
.../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h | 1 +
Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 9 +
.../Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 240 ++++++++++++++++++++-
.../RaspberryPi/Include/IndustryStandard/RpiMbox.h | 94 +++++++-
.../RaspberryPi/Include/Protocol/RpiFirmware.h | 25 +++
.../Library/PlatformBootManagerLib/PlatformBm.c | 2 +-
.../Bcm283x/Include/IndustryStandard/Bcm2836Sdio.h | 42 ++--
8 files changed, 486 insertions(+), 58 deletions(-)
--
2.13.7
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/7] Platform/RaspberryPi: Update VPU mailbox constants
2020-12-14 23:23 [PATCH 0/7] Enable emmc2 controller rpi4 Jeremy Linton
@ 2020-12-14 23:23 ` Jeremy Linton
2020-12-15 18:15 ` [edk2-devel] " Andrei Warkentin
2020-12-14 23:23 ` [PATCH 2/7] Platform/RaspberryPi: Add further mailbox helpers Jeremy Linton
` (5 subsequent siblings)
6 siblings, 1 reply; 20+ messages in thread
From: Jeremy Linton @ 2020-12-14 23:23 UTC (permalink / raw)
To: devel
Cc: ard.biesheuvel, leif, pete, andrey.warkentin,
samer.el-haj-mahmoud, Jeremy Linton
Lets sync our mailbox commands with the known/linux
constants so that we have a more complete view of
what we can request from the VPU.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
.../RaspberryPi/Include/IndustryStandard/RpiMbox.h | 94 ++++++++++++++++++++--
1 file changed, 89 insertions(+), 5 deletions(-)
diff --git a/Platform/RaspberryPi/Include/IndustryStandard/RpiMbox.h b/Platform/RaspberryPi/Include/IndustryStandard/RpiMbox.h
index 7104068998..551c2b82e5 100644
--- a/Platform/RaspberryPi/Include/IndustryStandard/RpiMbox.h
+++ b/Platform/RaspberryPi/Include/IndustryStandard/RpiMbox.h
@@ -45,6 +45,10 @@
#define RPI_MBOX_GET_BOARD_SERIAL 0x00010004
#define RPI_MBOX_GET_ARM_MEMSIZE 0x00010005
#define RPI_MBOX_GET_VC_MEMSIZE 0x00010006
+#define RPI_MBOX_GET_CLOCKS 0x00010007
+
+#define RPI_MBOX_GET_POWER_STATE 0x00020001
+#define RPI_MBOX_GET_TIMING 0x00020002
#define RPI_MBOX_SET_POWER_STATE 0x00028001
@@ -58,28 +62,92 @@
#define RPI_MBOX_POWER_STATE_SPI 0x00000007
#define RPI_MBOX_POWER_STATE_CCP2TX 0x00000008
+#define RPI_MBOX_GET_CLOCK_STATE 0x00030001
#define RPI_MBOX_GET_CLOCK_RATE 0x00030002
+#define RPI_MBOX_GET_VOLTAGE 0x00030003
#define RPI_MBOX_GET_MAX_CLOCK_RATE 0x00030004
+#define RPI_MBOX_GET_MAX_VOLTAGE 0x00030005
+#define RPI_MBOX_GET_TEMPERATURE 0x00030006
#define RPI_MBOX_GET_MIN_CLOCK_RATE 0x00030007
-
+#define RPI_MBOX_GET_MIN_VOLTAGE 0x00030008
+#define RPI_MBOX_GET_TURBO 0x00030009
+#define RPI_MBOX_GET_MAX_TEMPERATURE 0x0003000a
+#define RPI_MBOX_GET_STC 0x0003000b
+#define RPI_MBOX_ALLOCATE_MEMORY 0x0003000c
+#define RPI_MBOX_LOCK_MEMORY 0x0003000d
+#define RPI_MBOX_UNLOCK_MEMORY 0x0003000e
+#define RPI_MBOX_RELEASE_MEMORY 0x0003000f
+#define RPI_MBOX_EXECUTE_CODE 0x00030010
+#define RPI_MBOX_EXECUTE_QPU 0x00030011
+#define RPI_MBOX_SET_ENABLE_QPU 0x00030012
+#define RPI_MBOX_GET_DISPMANX_RESOURCE_MEM_HANDLE 0x00030014
+#define RPI_MBOX_GET_EDID_BLOCK 0x00030020
+#define RPI_MBOX_GET_CUSTOMER_OTP 0x00030021
+#define RPI_MBOX_GET_DOMAIN_STATE 0x00030030
+#define RPI_MBOX_GET_GPIO_STATE 0x00030041
+#define RPI_MBOX_GET_GPIO_CONFIG 0x00030043
+#define RPI_MBOX_GET_PERIPH_REG 0x00030045
+#define RPI_MBOX_GET_THROTTLED 0x00030046
+#define RPI_MBOX_GET_CLOCK_MEASURED 0x00030047
+#define RPI_MBOX_NOTIFY_REBOOT 0x00030048
+#define RPI_MBOX_GET_POE_HAT_VAL 0x00030049
+#define RPI_MBOX_SET_POE_HAT_VAL 0x00030050
#define RPI_MBOX_NOTIFY_XHCI_RESET 0x00030058
+#define RPI_MBOX_SET_CLOCK_STATE 0x00038001
#define RPI_MBOX_SET_CLOCK_RATE 0x00038002
+#define RPI_MBOX_SET_VOLTAGE 0x00038003
+#define RPI_MBOX_SET_TURBO 0x00038009
+#define RPI_MBOX_SET_CUSTOMER_OTP 0x00038021
+#define RPI_MBOX_SET_DOMAIN_STATE 0x00038030
#define RPI_MBOX_SET_GPIO 0x00038041
+#define RPI_MBOX_SET_SDHOST_CLOCK 0x00038042
+#define RPI_MBOX_SET_GPIO_CONFIG 0x00038043
+#define RPI_MBOX_SET_PERIPH_REG 0x00038045
+#define RPI_MBOX_ALLOC_FB 0x00040001
+#define RPI_MBOX_FB_BLANK 0x00040002
#define RPI_MBOX_GET_FB_GEOMETRY 0x00040003
-#define RPI_MBOX_GET_FB_LINELENGTH 0x00040008
+#define RPI_MBOX_GET_FB_VIRTUAL_WIDTH_HEIGHT 0x00040004
#define RPI_MBOX_GET_FB_COLOR_DEPTH 0x00040005
-#define RPI_MBOX_GET_FB_REGION 0x00040001
+#define RPI_MBOX_GET_FB_PIXEL_ORDER 0x00040006
+#define RPI_MBOX_GET_FB_ALPHA_MODE 0x00040007
+#define RPI_MBOX_GET_FB_LINELENGTH 0x00040008
+#define RPI_MBOX_GET_FB_VIRTUAL_OFFSET 0x00040009
+#define RPI_MBOX_GET_FB_OVERSCAN 0x0004000a
+#define RPI_MBOX_GET_FB_PALETTE 0x0004000b
+#define RPI_MBOX_GET_FB_TOUCHBUF 0x0004000f
+#define RPI_MBOX_GET_FB_GPIOVIRTBUF 0x00040010
+
+#define RPI_MBOX_TEST_FB_PHYSICAL_WIDTH_HEIGHT 0x00044003
+#define RPI_MBOX_TEST_FB_VIRTUAL_WIDTH_HEIGHT 0x00044004
+#define RPI_MBOX_TEST_FB_DEPTH 0x00044005
+#define RPI_MBOX_TEST_FB_PIXEL_ORDER 0x00044006
+#define RPI_MBOX_TEST_FB_ALPHA_MODE 0x00044007
+#define RPI_MBOX_TEST_FB_VIRTUAL_OFFSET 0x00044009
+#define RPI_MBOX_TEST_FB_OVERSCAN 0x0004400a
+#define RPI_MBOX_TEST_FB_PALETTE 0x0004400b
+#define RPI_MBOX_TEST_FB_VSYNC 0x0004400e
+#define RPI_MBOX_FREE_FB 0x00048001
#define RPI_MBOX_SET_FB_PGEOM 0x00048003
#define RPI_MBOX_SET_FB_VGEOM 0x00048004
#define RPI_MBOX_SET_FB_DEPTH 0x00048005
-#define RPI_MBOX_ALLOC_FB 0x00040001
-#define RPI_MBOX_FREE_FB 0x00048001
+#define RPI_MBOX_SET_FB_PIXEL_ORDER 0x00048006
+#define RPI_MBOX_SET_FB_ALPHA_MODE 0x00048007
+#define RPI_MBOX_SET_FB_VIRTUAL_OFFSET 0x00048009
+#define RPI_MBOX_SET_FB_OVERSCAN 0x0004800a
+#define RPI_MBOX_SET_FB_PALET TE 0x0004800b
+#define RPI_MBOX_VCHIQ_INIT 0x00048010
+#define RPI_MBOX_SET_FB_TOUCHBUF 0x0004801f
+#define RPI_MBOX_SET_FB_GPIOVIRTBUF 0x00048020
+#define RPI_MBOX_SET_FB_VSYNC 0x0004800e
+#define RPI_MBOX_SET_FB_BACKLIGHT 0x0004800f
#define RPI_MBOX_GET_COMMAND_LINE 0x00050001
+#define RPI_MBOX_GET_DMA_CHANNELS 0x00060001
+
#define RPI_MBOX_POWER_STATE_ENABLE BIT0
#define RPI_MBOX_POWER_STATE_WAIT BIT1
@@ -93,5 +161,21 @@
#define RPI_MBOX_CLOCK_RATE_SDRAM 0x000000008
#define RPI_MBOX_CLOCK_RATE_PIXEL 0x000000009
#define RPI_MBOX_CLOCK_RATE_PWM 0x00000000a
+#define RPI_MBOX_CLOCK_RATE_HEVC 0x00000000b
+#define RPI_MBOX_CLOCK_RATE_EMMC2 0x00000000c
+#define RPI_MBOX_CLOCK_RATE_M2MC 0x00000000d
+#define RPI_MBOX_CLOCK_RATE_PIXEL_BVB 0x00000000d
+
+#define RPI_EXP_GPIO_DIR_IN 0
+#define RPI_EXP_GPIO_DIR_OUT 1
+
+#define RPI_EXP_GPIO_BT 0
+#define RPI_EXP_GPIO_WIFI 1
+#define RPI_EXP_GPIO_LED 2
+#define RPI_EXP_GPIO_RESET 3
+#define RPI_EXP_GPIO_SD_VOLT 4
+#define RPI_EXP_GPIO_CAMERA 5
+#define RPI_EXP_GPIO_SD_POWER 6
+#define RPI_EXP_GPIO_POWER_LED 7
#endif /* __RASPBERRY_PI_MAILBOX_H__ */
--
2.13.7
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 2/7] Platform/RaspberryPi: Add further mailbox helpers
2020-12-14 23:23 [PATCH 0/7] Enable emmc2 controller rpi4 Jeremy Linton
2020-12-14 23:23 ` [PATCH 1/7] Platform/RaspberryPi: Update VPU mailbox constants Jeremy Linton
@ 2020-12-14 23:23 ` Jeremy Linton
2020-12-15 18:18 ` [edk2-devel] " Andrei Warkentin
2020-12-14 23:23 ` [PATCH 3/7] Platform/RaspberryPi: Split MMC register defintions Jeremy Linton
` (4 subsequent siblings)
6 siblings, 1 reply; 20+ messages in thread
From: Jeremy Linton @ 2020-12-14 23:23 UTC (permalink / raw)
To: devel
Cc: ard.biesheuvel, leif, pete, andrey.warkentin,
samer.el-haj-mahmoud, Jeremy Linton
Lets add some further mailbox helpers and convert the existing
RpiFirmwareSetLed into a generic SetGpio() function.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
.../Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 240 ++++++++++++++++++++-
.../RaspberryPi/Include/Protocol/RpiFirmware.h | 25 +++
2 files changed, 255 insertions(+), 10 deletions(-)
diff --git a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
index ade91c9f34..bf74148bbb 100644
--- a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
+++ b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
@@ -1090,7 +1090,6 @@ RpiFirmwareSetClockRate (
return EFI_SUCCESS;
}
-
#pragma pack()
typedef struct {
UINT32 ClockId;
@@ -1152,6 +1151,17 @@ RpiFirmwareGetClockRate (
STATIC
EFI_STATUS
EFIAPI
+RpiFirmwareGetCurrentClockState (
+ IN UINT32 ClockId,
+ OUT UINT32 *ClockState
+ )
+{
+ return RpiFirmwareGetClockRate (ClockId, RPI_MBOX_GET_CLOCK_STATE, ClockState);
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
RpiFirmwareGetCurrentClockRate (
IN UINT32 ClockId,
OUT UINT32 *ClockRate
@@ -1181,6 +1191,63 @@ RpiFirmwareGetMinClockRate (
{
return RpiFirmwareGetClockRate (ClockId, RPI_MBOX_GET_MIN_CLOCK_RATE, ClockRate);
}
+
+#pragma pack()
+typedef struct {
+ UINT32 ClockId;
+ UINT32 ClockState;
+} RPI_FW_GET_CLOCK_STATE_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_GET_CLOCK_STATE_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_SET_CLOCK_STATE_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+RpiFirmwareSetClockState (
+ IN UINT32 ClockId,
+ IN UINT32 ClockState
+ )
+{
+ RPI_FW_SET_CLOCK_STATE_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof (*Cmd));
+
+ Cmd->BufferHead.BufferSize = sizeof (*Cmd);
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_MBOX_SET_CLOCK_STATE;
+ Cmd->TagHead.TagSize = sizeof (Cmd->TagBody);
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->TagBody.ClockId = ClockId;
+ Cmd->TagBody.ClockState = ClockState;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
#pragma pack()
typedef struct {
@@ -1199,8 +1266,9 @@ typedef struct {
STATIC
VOID
EFIAPI
-RpiFirmwareSetLed (
- IN BOOLEAN On
+RpiFirmwareSetGpio (
+ IN UINT32 Gpio,
+ IN BOOLEAN State
)
{
RPI_FW_SET_GPIO_CMD *Cmd;
@@ -1220,14 +1288,10 @@ RpiFirmwareSetLed (
Cmd->TagHead.TagId = RPI_MBOX_SET_GPIO;
Cmd->TagHead.TagSize = sizeof (Cmd->TagBody);
/*
- * GPIO_PIN_2 = Activity LED
- * GPIO_PIN_4 = HDMI Detect (Input / Active Low)
- * GPIO_PIN_7 = Power LED (Input / Active Low)
- *
* There's also a 128 pin offset.
*/
- Cmd->TagBody.Pin = 128 + 2;
- Cmd->TagBody.State = On;
+ Cmd->TagBody.Pin = 128 + Gpio;
+ Cmd->TagBody.State = State;
Cmd->TagHead.TagValueSize = 0;
Cmd->EndTag = 0;
@@ -1242,6 +1306,16 @@ RpiFirmwareSetLed (
__FUNCTION__, Status, Cmd->BufferHead.Response));
}
}
+
+STATIC
+VOID
+EFIAPI
+RpiFirmwareSetLed (
+ IN BOOLEAN On
+ )
+{
+ RpiFirmwareSetGpio (RPI_EXP_GPIO_LED, On);
+}
#pragma pack()
typedef struct {
@@ -1299,6 +1373,149 @@ RpiFirmwareNotifyXhciReset (
return Status;
}
+#pragma pack()
+typedef struct {
+ UINT32 Gpio;
+ UINT32 Direction;
+ UINT32 Polarity;
+ UINT32 TermEn;
+ UINT32 TermPullUp;
+} RPI_FW_GPIO_GET_CFG_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_GPIO_GET_CFG_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_NOTIFY_GPIO_GET_CFG_CMD;
+#pragma pack()
+
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareNotifyGpioGetCfg (
+ IN UINTN Gpio,
+ IN UINT32 *Polarity
+ )
+{
+ RPI_FW_NOTIFY_GPIO_GET_CFG_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof (*Cmd));
+
+ Cmd->BufferHead.BufferSize = sizeof (*Cmd);
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_MBOX_GET_GPIO_CONFIG;
+ Cmd->TagHead.TagSize = sizeof (Cmd->TagBody);
+ Cmd->TagBody.Gpio = 128 + Gpio;
+
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result);
+
+ *Polarity = Cmd->TagBody.Polarity;
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ }
+
+ return Status;
+}
+
+
+#pragma pack()
+typedef struct {
+ UINT32 Gpio;
+ UINT32 Direction;
+ UINT32 Polarity;
+ UINT32 TermEn;
+ UINT32 TermPullUp;
+ UINT32 State;
+} RPI_FW_GPIO_SET_CFG_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_GPIO_SET_CFG_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_NOTIFY_GPIO_SET_CFG_CMD;
+#pragma pack()
+
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareNotifyGpioSetCfg (
+ IN UINTN Gpio,
+ IN UINTN Direction,
+ IN UINTN State
+ )
+{
+ RPI_FW_NOTIFY_GPIO_SET_CFG_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ Status = RpiFirmwareNotifyGpioGetCfg (Gpio, &Result);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: Failed to get GPIO polarity\n", __FUNCTION__));
+ Result = 0; //default polarity
+ }
+
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof (*Cmd));
+
+ Cmd->BufferHead.BufferSize = sizeof (*Cmd);
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_MBOX_SET_GPIO_CONFIG;
+ Cmd->TagHead.TagSize = sizeof (Cmd->TagBody);
+
+ Cmd->TagBody.Gpio = 128 + Gpio;
+ Cmd->TagBody.Direction = Direction;
+ Cmd->TagBody.Polarity = Result;
+ Cmd->TagBody.TermEn = 0;
+ Cmd->TagBody.TermPullUp = 0;
+ Cmd->TagBody.State = State;
+
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ }
+
+ RpiFirmwareSetGpio (Gpio,!State);
+
+
+ return Status;
+}
+
STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL mRpiFirmwareProtocol = {
RpiFirmwareSetPowerState,
RpiFirmwareGetMacAddress,
@@ -1321,7 +1538,10 @@ STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL mRpiFirmwareProtocol = {
RpiFirmwareGetCpuName,
RpiFirmwareGetArmMemory,
RPiFirmwareGetModelInstalledMB,
- RpiFirmwareNotifyXhciReset
+ RpiFirmwareNotifyXhciReset,
+ RpiFirmwareGetCurrentClockState,
+ RpiFirmwareSetClockState,
+ RpiFirmwareNotifyGpioSetCfg
};
/**
diff --git a/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h b/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h
index 56a8d15a38..d841608e57 100644
--- a/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h
+++ b/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h
@@ -37,6 +37,20 @@ EFI_STATUS
typedef
EFI_STATUS
+(EFIAPI *GET_CLOCK_STATE) (
+ IN UINT32 ClockId,
+ OUT UINT32 *ClockState
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *SET_CLOCK_STATE) (
+ IN UINT32 ClockId,
+ IN UINT32 ClockState
+ );
+
+typedef
+EFI_STATUS
(EFIAPI *GET_CLOCK_RATE) (
IN UINT32 ClockId,
OUT UINT32 *ClockRate
@@ -149,6 +163,14 @@ EFI_STATUS
UINTN FunctionNumber
);
+typedef
+EFI_STATUS
+(EFIAPI *GPIO_SET_CFG) (
+ UINTN Gpio,
+ UINTN Direction,
+ UINTN State
+ );
+
typedef struct {
SET_POWER_STATE SetPowerState;
GET_MAC_ADDRESS GetMacAddress;
@@ -172,6 +194,9 @@ typedef struct {
GET_ARM_MEM GetArmMem;
GET_MODEL_INSTALLED_MB GetModelInstalledMB;
NOTIFY_XHCI_RESET NotifyXhciReset;
+ GET_CLOCK_STATE GetClockState;
+ SET_CLOCK_STATE SetClockState;
+ GPIO_SET_CFG SetGpioConfig;
} RASPBERRY_PI_FIRMWARE_PROTOCOL;
extern EFI_GUID gRaspberryPiFirmwareProtocolGuid;
--
2.13.7
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 3/7] Platform/RaspberryPi: Split MMC register defintions
2020-12-14 23:23 [PATCH 0/7] Enable emmc2 controller rpi4 Jeremy Linton
2020-12-14 23:23 ` [PATCH 1/7] Platform/RaspberryPi: Update VPU mailbox constants Jeremy Linton
2020-12-14 23:23 ` [PATCH 2/7] Platform/RaspberryPi: Add further mailbox helpers Jeremy Linton
@ 2020-12-14 23:23 ` Jeremy Linton
2020-12-15 18:17 ` [edk2-devel] " Andrei Warkentin
2020-12-14 23:23 ` [PATCH 4/7] Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config Jeremy Linton
` (3 subsequent siblings)
6 siblings, 1 reply; 20+ messages in thread
From: Jeremy Linton @ 2020-12-14 23:23 UTC (permalink / raw)
To: devel
Cc: ard.biesheuvel, leif, pete, andrey.warkentin,
samer.el-haj-mahmoud, Jeremy Linton
The current MMC (really SDHCI) defintions are tied to the
arasan controller. As we intend to reuse the definitions lets
make the base address configurable when the driver loads.
This assumes we won't ever want to run both the emmc2
and arasan sdhci controller at the same time.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
.../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c | 9 ++++-
.../Bcm283x/Include/IndustryStandard/Bcm2836Sdio.h | 42 ++++++++++++----------
2 files changed, 32 insertions(+), 19 deletions(-)
diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
index 88e9126e35..0cb7e85b38 100644
--- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
+++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
@@ -16,6 +16,7 @@ STATIC CARD_DETECT_STATE mCardDetectState = CardDetectRequired;
UINT32 LastExecutedCommand = (UINT32) -1;
STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
+STATIC UINTN MMCHS_BASE;
/**
These SD commands are optional, according to the SD Spec
@@ -763,7 +764,13 @@ MMCInitialize (
DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: MMCInitialize()\n"));
- if (!PcdGet32 (PcdSdIsArasan)) {
+ if (PcdGet32 (PcdSdIsArasan)) {
+ DEBUG ((DEBUG_INFO, "SD is routed to Arasan\n"));
+ MMCHS_BASE = MMCHS1_BASE;
+ } else if (RPI_MODEL == 4) {
+ DEBUG ((DEBUG_INFO, "SD is routed to emmc2\n"));
+ MMCHS_BASE = MMCHS2_BASE;
+ } else {
DEBUG ((DEBUG_INFO, "SD is not routed to Arasan\n"));
return EFI_REQUEST_UNLOAD_IMAGE;
}
diff --git a/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836Sdio.h b/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836Sdio.h
index fd07b47170..e6892d36cf 100644
--- a/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836Sdio.h
+++ b/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836Sdio.h
@@ -13,15 +13,18 @@
// MMC/SD/SDIO1 register definitions.
#define MMCHS1_OFFSET 0x00300000
+#define MMCHS2_OFFSET 0x00340000
#define MMCHS1_BASE (BCM2836_SOC_REGISTERS + MMCHS1_OFFSET)
+#define MMCHS2_BASE (BCM2836_SOC_REGISTERS + MMCHS2_OFFSET)
#define MMCHS1_LENGTH 0x00000100
+#define MMCHS2_LENGTH 0x00000100
-#define MMCHS_BLK (MMCHS1_BASE + 0x4)
+#define MMCHS_BLK (MMCHS_BASE + 0x4)
#define BLEN_512BYTES (0x200UL << 0)
-#define MMCHS_ARG (MMCHS1_BASE + 0x8)
+#define MMCHS_ARG (MMCHS_BASE + 0x8)
-#define MMCHS_CMD (MMCHS1_BASE + 0xC)
+#define MMCHS_CMD (MMCHS_BASE + 0xC)
#define BCE_ENABLE BIT1
#define DDIR_READ BIT4
#define DDIR_WRITE (0x0UL << 4)
@@ -43,13 +46,13 @@
#define INDX(CMD_INDX) (TYPE(CMD_TYPE_NORMAL) | _INDX(CMD_INDX))
#define INDX_ABORT(CMD_INDX) (TYPE(CMD_TYPE_ABORT) | _INDX(CMD_INDX))
-#define MMCHS_RSP10 (MMCHS1_BASE + 0x10)
-#define MMCHS_RSP32 (MMCHS1_BASE + 0x14)
-#define MMCHS_RSP54 (MMCHS1_BASE + 0x18)
-#define MMCHS_RSP76 (MMCHS1_BASE + 0x1C)
-#define MMCHS_DATA (MMCHS1_BASE + 0x20)
+#define MMCHS_RSP10 (MMCHS_BASE + 0x10)
+#define MMCHS_RSP32 (MMCHS_BASE + 0x14)
+#define MMCHS_RSP54 (MMCHS_BASE + 0x18)
+#define MMCHS_RSP76 (MMCHS_BASE + 0x1C)
+#define MMCHS_DATA (MMCHS_BASE + 0x20)
-#define MMCHS_PRES_STATE (MMCHS1_BASE + 0x24)
+#define MMCHS_PRES_STATE (MMCHS_BASE + 0x24)
#define CMDI_MASK BIT0
#define CMDI_ALLOWED (0x0UL << 0)
#define CMDI_NOT_ALLOWED BIT0
@@ -58,17 +61,19 @@
#define DATI_NOT_ALLOWED BIT1
#define WRITE_PROTECT_OFF BIT19
-#define MMCHS_HCTL (MMCHS1_BASE + 0x28)
+#define MMCHS_HCTL (MMCHS_BASE + 0x28)
#define DTW_1_BIT (0x0UL << 1)
#define DTW_4_BIT BIT1
#define SDBP_MASK BIT8
#define SDBP_OFF (0x0UL << 8)
#define SDBP_ON BIT8
+#define SDVS_MASK (0x7UL << 9)
#define SDVS_1_8_V (0x5UL << 9)
#define SDVS_3_0_V (0x6UL << 9)
+#define SDVS_3_3_V (0x7UL << 9)
#define IWE BIT24
-#define MMCHS_SYSCTL (MMCHS1_BASE + 0x2C)
+#define MMCHS_SYSCTL (MMCHS_BASE + 0x2C)
#define ICE BIT0
#define ICS_MASK BIT1
#define ICS BIT1
@@ -84,7 +89,7 @@
#define SRC BIT25
#define SRD BIT26
-#define MMCHS_INT_STAT (MMCHS1_BASE + 0x30)
+#define MMCHS_INT_STAT (MMCHS_BASE + 0x30)
#define CC BIT0
#define TC BIT1
#define BWR BIT4
@@ -96,7 +101,7 @@
#define DCRC BIT21
#define DEB BIT22
-#define MMCHS_IE (MMCHS1_BASE + 0x34)
+#define MMCHS_IE (MMCHS_BASE + 0x34)
#define CC_EN BIT0
#define TC_EN BIT1
#define BWR_EN BIT4
@@ -112,7 +117,7 @@
#define BADA_EN BIT29
#define ALL_EN 0xFFFFFFFF
-#define MMCHS_ISE (MMCHS1_BASE + 0x38)
+#define MMCHS_ISE (MMCHS_BASE + 0x38)
#define CC_SIGEN BIT0
#define TC_SIGEN BIT1
#define BWR_SIGEN BIT4
@@ -127,14 +132,15 @@
#define CERR_SIGEN BIT28
#define BADA_SIGEN BIT29
-#define MMCHS_AC12 (MMCHS1_BASE + 0x3C)
+#define MMCHS_AC12 (MMCHS_BASE + 0x3C)
+#define MMCHS_HC2R (MMCHS_BASE + 0x3E)
-#define MMCHS_CAPA (MMCHS1_BASE + 0x40)
+#define MMCHS_CAPA (MMCHS_BASE + 0x40)
#define VS30 BIT25
#define VS18 BIT26
-#define MMCHS_CUR_CAPA (MMCHS1_BASE + 0x48)
-#define MMCHS_REV (MMCHS1_BASE + 0xFC)
+#define MMCHS_CUR_CAPA (MMCHS_BASE + 0x48)
+#define MMCHS_REV (MMCHS_BASE + 0xFC)
#define BLOCK_COUNT_SHIFT 16
#define RCA_SHIFT 16
--
2.13.7
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 4/7] Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config
2020-12-14 23:23 [PATCH 0/7] Enable emmc2 controller rpi4 Jeremy Linton
` (2 preceding siblings ...)
2020-12-14 23:23 ` [PATCH 3/7] Platform/RaspberryPi: Split MMC register defintions Jeremy Linton
@ 2020-12-14 23:23 ` Jeremy Linton
2020-12-15 18:26 ` [edk2-devel] " Andrei Warkentin
2020-12-14 23:23 ` [PATCH 5/7] Platform/RaspberryPi/Arasan: Select the correct base frequency Jeremy Linton
` (2 subsequent siblings)
6 siblings, 1 reply; 20+ messages in thread
From: Jeremy Linton @ 2020-12-14 23:23 UTC (permalink / raw)
To: devel
Cc: ard.biesheuvel, leif, pete, andrey.warkentin,
samer.el-haj-mahmoud, Jeremy Linton
The uboot and linux drivers have notes that there is a clock domain crossing
problem that happens with back to back writes to the sd controllers on the
rpi. Its not clear if this is still applicable to the rpi4/emmc2 but
it seems wise to add it.
Futher, we need to assure that the card voltage is set to 3.3V, and
we should try and follow some of the SDHCI docs when it comes to
changing the clock.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
.../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c | 112 +++++++++++++++++----
.../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h | 1 +
2 files changed, 93 insertions(+), 20 deletions(-)
diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
index 0cb7e85b38..a7b538a91a 100644
--- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
+++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
@@ -18,6 +18,56 @@ UINT32 LastExecutedCommand = (UINT32) -1;
STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
STATIC UINTN MMCHS_BASE;
+STATIC
+UINT32
+EFIAPI
+SdMmioWrite32 (
+ IN UINTN Address,
+ IN UINT32 Value
+ )
+{
+ UINT32 ret;
+ ret = (UINT32)MmioWrite32 (Address, Value);
+ // There is a bug about clock domain crossing on writes, delay to avoid it
+ gBS->Stall (STALL_AFTER_REG_WRITE_US);
+ return ret;
+}
+
+STATIC
+UINT32
+EFIAPI
+SdMmioOr32 (
+ IN UINTN Address,
+ IN UINT32 OrData
+ )
+{
+ return SdMmioWrite32 (Address, MmioRead32 (Address) | OrData);
+}
+
+STATIC
+UINT32
+EFIAPI
+SdMmioAnd32 (
+ IN UINTN Address,
+ IN UINT32 AndData
+ )
+{
+ return SdMmioWrite32 (Address, MmioRead32 (Address) & AndData);
+}
+
+STATIC
+UINT32
+EFIAPI
+SdMmioAndThenOr32 (
+ IN UINTN Address,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return SdMmioWrite32 (Address, (MmioRead32 (Address) & AndData) | OrData);
+}
+
+
/**
These SD commands are optional, according to the SD Spec
**/
@@ -175,7 +225,9 @@ SoftReset (
IN UINT32 Mask
)
{
- MmioOr32 (MMCHS_SYSCTL, Mask);
+ DEBUG ((DEBUG_MMCHOST_SD, "SoftReset with mask 0x%x\n", Mask));
+
+ SdMmioOr32 (MMCHS_SYSCTL, Mask);
if (PollRegisterWithMask (MMCHS_SYSCTL, Mask, 0) == EFI_TIMEOUT) {
DEBUG ((DEBUG_ERROR, "Failed to SoftReset with mask 0x%x\n", Mask));
return EFI_TIMEOUT;
@@ -326,29 +378,29 @@ MMCSendCommand (
}
if (IsAppCmd && MmcCmd == ACMD22) {
- MmioWrite32 (MMCHS_BLK, 4);
+ SdMmioWrite32 (MMCHS_BLK, 4);
} else if (IsAppCmd && MmcCmd == ACMD51) {
- MmioWrite32 (MMCHS_BLK, 8);
+ SdMmioWrite32 (MMCHS_BLK, 8);
} else if (!IsAppCmd && MmcCmd == CMD6) {
- MmioWrite32 (MMCHS_BLK, 64);
+ SdMmioWrite32 (MMCHS_BLK, 64);
} else if (IsADTCCmd) {
- MmioWrite32 (MMCHS_BLK, BLEN_512BYTES);
+ SdMmioWrite32 (MMCHS_BLK, BLEN_512BYTES);
}
// Set Data timeout counter value to max value.
- MmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~DTO_MASK, DTO_VAL);
+ SdMmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~DTO_MASK, DTO_VAL);
//
// Clear Interrupt Status Register, but not the Card Inserted bit
// to avoid messing with card detection logic.
//
- MmioWrite32 (MMCHS_INT_STAT, ALL_EN & ~(CARD_INS));
+ SdMmioWrite32 (MMCHS_INT_STAT, ALL_EN & ~(CARD_INS));
// Set command argument register
- MmioWrite32 (MMCHS_ARG, Argument);
+ SdMmioWrite32 (MMCHS_ARG, Argument);
// Send the command
- MmioWrite32 (MMCHS_CMD, MmcCmd);
+ SdMmioWrite32 (MMCHS_CMD, MmcCmd);
// Check for the command status.
while (RetryCount < MAX_RETRY_COUNT) {
@@ -373,7 +425,7 @@ MMCSendCommand (
// Check if command is completed.
if ((MmcStatus & CC) == CC) {
- MmioWrite32 (MMCHS_INT_STAT, CC);
+ SdMmioWrite32 (MMCHS_INT_STAT, CC);
break;
}
@@ -428,6 +480,21 @@ MMCNotifyState (
return Status;
}
+ DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: CAP %X CAPH %X\n", MmioRead32(MMCHS_CAPA),MmioRead32(MMCHS_CUR_CAPA)));
+
+ // Lets switch to card detect test mode.
+ SdMmioOr32 (MMCHS_HCTL, BIT7|BIT6);
+
+ // set card voltage
+ SdMmioAnd32 (MMCHS_HCTL, ~SDBP_ON);
+ SdMmioAndThenOr32 (MMCHS_HCTL, (UINT32) ~SDBP_MASK, SDVS_3_3_V);
+ SdMmioOr32 (MMCHS_HCTL, SDBP_ON);
+
+ DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: AC12 %X HCTL %X\n", MmioRead32(MMCHS_AC12),MmioRead32(MMCHS_HCTL)));
+
+ // First turn off the clock
+ SdMmioAnd32 (MMCHS_SYSCTL, ~CEN);
+
// Attempt to set the clock to 400Khz which is the expected initialization speed
Status = CalculateClockFrequencyDivisor (400000, &Divisor, NULL);
if (EFI_ERROR (Status)) {
@@ -436,10 +503,15 @@ MMCNotifyState (
}
// Set Data Timeout Counter value, set clock frequency, enable internal clock
- MmioOr32 (MMCHS_SYSCTL, DTO_VAL | Divisor | CEN | ICS | ICE);
+ SdMmioOr32 (MMCHS_SYSCTL, DTO_VAL | Divisor | CEN | ICS | ICE);
+ SdMmioOr32 (MMCHS_HCTL, SDBP_ON);
+ // wait for ICS
+ while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);
+
+ DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: AC12 %X HCTL %X\n", MmioRead32(MMCHS_AC12),MmioRead32(MMCHS_HCTL)));
// Enable interrupts
- MmioWrite32 (MMCHS_IE, ALL_EN);
+ SdMmioWrite32 (MMCHS_IE, ALL_EN);
}
break;
case MmcIdleState:
@@ -452,7 +524,7 @@ MMCNotifyState (
ClockFrequency = 25000000;
// First turn off the clock
- MmioAnd32 (MMCHS_SYSCTL, ~CEN);
+ SdMmioAnd32 (MMCHS_SYSCTL, ~CEN);
Status = CalculateClockFrequencyDivisor (ClockFrequency, &Divisor, NULL);
if (EFI_ERROR (Status)) {
@@ -462,13 +534,13 @@ MMCNotifyState (
}
// Setup new divisor
- MmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~CLKD_MASK, Divisor);
+ SdMmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~CLKD_MASK, Divisor);
// Wait for the clock to stabilise
while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);
// Set Data Timeout Counter value, set clock frequency, enable internal clock
- MmioOr32 (MMCHS_SYSCTL, CEN);
+ SdMmioOr32 (MMCHS_SYSCTL, CEN);
break;
case MmcTransferState:
break;
@@ -635,7 +707,7 @@ MMCReadBlockData (
while (RetryCount < MAX_RETRY_COUNT) {
MmcStatus = MmioRead32 (MMCHS_INT_STAT);
if ((MmcStatus & BRR) != 0) {
- MmioWrite32 (MMCHS_INT_STAT, BRR);
+ SdMmioWrite32 (MMCHS_INT_STAT, BRR);
/*
* Data is ready.
*/
@@ -662,7 +734,7 @@ MMCReadBlockData (
gBS->Stall (STALL_AFTER_READ_US);
}
- MmioWrite32 (MMCHS_INT_STAT, BRR);
+ SdMmioWrite32 (MMCHS_INT_STAT, BRR);
return EFI_SUCCESS;
}
@@ -699,13 +771,13 @@ MMCWriteBlockData (
while (RetryCount < MAX_RETRY_COUNT) {
MmcStatus = MmioRead32 (MMCHS_INT_STAT);
if ((MmcStatus & BWR) != 0) {
- MmioWrite32 (MMCHS_INT_STAT, BWR);
+ SdMmioWrite32 (MMCHS_INT_STAT, BWR);
/*
* Can write data.
*/
mFwProtocol->SetLed (TRUE);
for (Count = 0; Count < BlockLen; Count += 4, Buffer++) {
- MmioWrite32 (MMCHS_DATA, *Buffer);
+ SdMmioWrite32 (MMCHS_DATA, *Buffer);
}
mFwProtocol->SetLed (FALSE);
@@ -726,7 +798,7 @@ MMCWriteBlockData (
gBS->Stall (STALL_AFTER_WRITE_US);
}
- MmioWrite32 (MMCHS_INT_STAT, BWR);
+ SdMmioWrite32 (MMCHS_INT_STAT, BWR);
return EFI_SUCCESS;
}
diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
index 6cd600f738..e94606cc5b 100644
--- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
+++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
@@ -37,6 +37,7 @@
#define STALL_AFTER_REC_RESP_US (50)
#define STALL_AFTER_WRITE_US (200)
#define STALL_AFTER_READ_US (20)
+#define STALL_AFTER_REG_WRITE_US (10)
#define STALL_AFTER_RETRY_US (20)
#define MAX_DIVISOR_VALUE 1023
--
2.13.7
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 5/7] Platform/RaspberryPi/Arasan: Select the correct base frequency
2020-12-14 23:23 [PATCH 0/7] Enable emmc2 controller rpi4 Jeremy Linton
` (3 preceding siblings ...)
2020-12-14 23:23 ` [PATCH 4/7] Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config Jeremy Linton
@ 2020-12-14 23:23 ` Jeremy Linton
2020-12-15 18:18 ` [edk2-devel] " Andrei Warkentin
2020-12-14 23:23 ` [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs Jeremy Linton
2020-12-14 23:23 ` [PATCH 7/7] Platform/RaspberryPi: Correct device path removal Jeremy Linton
6 siblings, 1 reply; 20+ messages in thread
From: Jeremy Linton @ 2020-12-14 23:23 UTC (permalink / raw)
To: devel
Cc: ard.biesheuvel, leif, pete, andrey.warkentin,
samer.el-haj-mahmoud, Jeremy Linton
The firmware reports the emmc2 frequency with a slightly
different mailbox command, lets select the correct one
based on which controller we are binding to.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
.../RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
index a7b538a91a..b0f03cefc9 100644
--- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
+++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
@@ -250,7 +250,11 @@ CalculateClockFrequencyDivisor (
UINT32 Divisor;
UINT32 BaseFrequency = 0;
- Status = mFwProtocol->GetClockRate (RPI_MBOX_CLOCK_RATE_EMMC, &BaseFrequency);
+ if (PcdGet32 (PcdSdIsArasan)) {
+ Status = mFwProtocol->GetClockRate (RPI_MBOX_CLOCK_RATE_EMMC, &BaseFrequency);
+ } else {
+ Status = mFwProtocol->GetClockRate (RPI_MBOX_CLOCK_RATE_EMMC2, &BaseFrequency);
+ }
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "Couldn't get RPI_MBOX_CLOCK_RATE_EMMC\n"));
return Status;
@@ -472,8 +476,8 @@ MMCNotifyState (
switch (State) {
case MmcHwInitializationState:
{
- EFI_STATUS Status;
- UINT32 Divisor;
+
+ DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: current divisor %x\n", MmioRead32(MMCHS_SYSCTL)));
Status = SoftReset (SRA);
if (EFI_ERROR (Status)) {
--
2.13.7
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
2020-12-14 23:23 [PATCH 0/7] Enable emmc2 controller rpi4 Jeremy Linton
` (4 preceding siblings ...)
2020-12-14 23:23 ` [PATCH 5/7] Platform/RaspberryPi/Arasan: Select the correct base frequency Jeremy Linton
@ 2020-12-14 23:23 ` Jeremy Linton
2020-12-15 18:21 ` [edk2-devel] " Andrei Warkentin
2020-12-14 23:23 ` [PATCH 7/7] Platform/RaspberryPi: Correct device path removal Jeremy Linton
6 siblings, 1 reply; 20+ messages in thread
From: Jeremy Linton @ 2020-12-14 23:23 UTC (permalink / raw)
To: devel
Cc: ard.biesheuvel, leif, pete, andrey.warkentin,
samer.el-haj-mahmoud, Jeremy Linton
It seems we should be powering up the sd cards, and possibly
the clocks as well to assure they are setup properly before
we attempt to access the controller.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
index 28f57438c5..8829740938 100644
--- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
+++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
@@ -552,6 +552,15 @@ ApplyVariables (
GpioPinFuncSet (37, GPIO_FSEL_ALT3);
GpioPinFuncSet (38, GPIO_FSEL_ALT3);
GpioPinFuncSet (39, GPIO_FSEL_ALT3);
+
+ /*
+ * power and clock everything by default
+ */
+ Status = mFwProtocol->SetPowerState (0, 1, 1); //SD on
+ Status = mFwProtocol->SetGpioConfig (RPI_EXP_GPIO_SD_VOLT,
+ RPI_EXP_GPIO_DIR_OUT, 1); //3.3v
+ Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC2, 1);
+ Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC, 1);
}
} else {
DEBUG ((DEBUG_ERROR, "Model Family %d not supported...\n", mModelFamily));
--
2.13.7
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 7/7] Platform/RaspberryPi: Correct device path removal.
2020-12-14 23:23 [PATCH 0/7] Enable emmc2 controller rpi4 Jeremy Linton
` (5 preceding siblings ...)
2020-12-14 23:23 ` [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs Jeremy Linton
@ 2020-12-14 23:23 ` Jeremy Linton
2020-12-15 18:19 ` [edk2-devel] " Andrei Warkentin
6 siblings, 1 reply; 20+ messages in thread
From: Jeremy Linton @ 2020-12-14 23:23 UTC (permalink / raw)
To: devel
Cc: ard.biesheuvel, leif, pete, andrey.warkentin,
samer.el-haj-mahmoud, Jeremy Linton
The "arasan" driver now works with the emmc2 device.
This means that both the PcdSdIsArasan and the
!PcdSdIsArasan result in valid SD controllers on the rpi4.
Lets avoid removing the "stale" boot entry, in this case
which also has the side effect of avoiding a boot assert
when emmc2 is selected.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
Platform/RaspberryPi/Library/PlatformBootManagerLib/PlatformBm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Platform/RaspberryPi/Library/PlatformBootManagerLib/PlatformBm.c b/Platform/RaspberryPi/Library/PlatformBootManagerLib/PlatformBm.c
index fa46be7917..c2fc40b8ea 100644
--- a/Platform/RaspberryPi/Library/PlatformBootManagerLib/PlatformBm.c
+++ b/Platform/RaspberryPi/Library/PlatformBootManagerLib/PlatformBm.c
@@ -431,7 +431,7 @@ RemoveStaleBootOptions (
EFI_DEVICE_PATH_PROTOCOL *DevicePath = BootOptions[Index].FilePath;
if (CompareMem (&mArasan, DevicePath, GetDevicePathSize (DevicePath)) == 0) {
- if (PcdGet32 (PcdSdIsArasan)) {
+ if (PcdGet32 (PcdSdIsArasan) || RPI_MODEL == 4) {
continue;
}
} else if (CompareMem (&mSDHost, DevicePath, GetDevicePathSize (DevicePath)) == 0) {
--
2.13.7
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 1/7] Platform/RaspberryPi: Update VPU mailbox constants
2020-12-14 23:23 ` [PATCH 1/7] Platform/RaspberryPi: Update VPU mailbox constants Jeremy Linton
@ 2020-12-15 18:15 ` Andrei Warkentin
0 siblings, 0 replies; 20+ messages in thread
From: Andrei Warkentin @ 2020-12-15 18:15 UTC (permalink / raw)
To: devel@edk2.groups.io, jeremy.linton@arm.com
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
[-- Attachment #1: Type: text/plain, Size: 11427 bytes --]
LGTM
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
________________________________
From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
Sent: Monday, December 14, 2020 5:23 PM
To: devel@edk2.groups.io <devel@edk2.groups.io>
Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
Subject: [edk2-devel] [PATCH 1/7] Platform/RaspberryPi: Update VPU mailbox constants
Lets sync our mailbox commands with the known/linux
constants so that we have a more complete view of
what we can request from the VPU.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
.../RaspberryPi/Include/IndustryStandard/RpiMbox.h | 94 ++++++++++++++++++++--
1 file changed, 89 insertions(+), 5 deletions(-)
diff --git a/Platform/RaspberryPi/Include/IndustryStandard/RpiMbox.h b/Platform/RaspberryPi/Include/IndustryStandard/RpiMbox.h
index 7104068998..551c2b82e5 100644
--- a/Platform/RaspberryPi/Include/IndustryStandard/RpiMbox.h
+++ b/Platform/RaspberryPi/Include/IndustryStandard/RpiMbox.h
@@ -45,6 +45,10 @@
#define RPI_MBOX_GET_BOARD_SERIAL 0x00010004
#define RPI_MBOX_GET_ARM_MEMSIZE 0x00010005
#define RPI_MBOX_GET_VC_MEMSIZE 0x00010006
+#define RPI_MBOX_GET_CLOCKS 0x00010007
+
+#define RPI_MBOX_GET_POWER_STATE 0x00020001
+#define RPI_MBOX_GET_TIMING 0x00020002
#define RPI_MBOX_SET_POWER_STATE 0x00028001
@@ -58,28 +62,92 @@
#define RPI_MBOX_POWER_STATE_SPI 0x00000007
#define RPI_MBOX_POWER_STATE_CCP2TX 0x00000008
+#define RPI_MBOX_GET_CLOCK_STATE 0x00030001
#define RPI_MBOX_GET_CLOCK_RATE 0x00030002
+#define RPI_MBOX_GET_VOLTAGE 0x00030003
#define RPI_MBOX_GET_MAX_CLOCK_RATE 0x00030004
+#define RPI_MBOX_GET_MAX_VOLTAGE 0x00030005
+#define RPI_MBOX_GET_TEMPERATURE 0x00030006
#define RPI_MBOX_GET_MIN_CLOCK_RATE 0x00030007
-
+#define RPI_MBOX_GET_MIN_VOLTAGE 0x00030008
+#define RPI_MBOX_GET_TURBO 0x00030009
+#define RPI_MBOX_GET_MAX_TEMPERATURE 0x0003000a
+#define RPI_MBOX_GET_STC 0x0003000b
+#define RPI_MBOX_ALLOCATE_MEMORY 0x0003000c
+#define RPI_MBOX_LOCK_MEMORY 0x0003000d
+#define RPI_MBOX_UNLOCK_MEMORY 0x0003000e
+#define RPI_MBOX_RELEASE_MEMORY 0x0003000f
+#define RPI_MBOX_EXECUTE_CODE 0x00030010
+#define RPI_MBOX_EXECUTE_QPU 0x00030011
+#define RPI_MBOX_SET_ENABLE_QPU 0x00030012
+#define RPI_MBOX_GET_DISPMANX_RESOURCE_MEM_HANDLE 0x00030014
+#define RPI_MBOX_GET_EDID_BLOCK 0x00030020
+#define RPI_MBOX_GET_CUSTOMER_OTP 0x00030021
+#define RPI_MBOX_GET_DOMAIN_STATE 0x00030030
+#define RPI_MBOX_GET_GPIO_STATE 0x00030041
+#define RPI_MBOX_GET_GPIO_CONFIG 0x00030043
+#define RPI_MBOX_GET_PERIPH_REG 0x00030045
+#define RPI_MBOX_GET_THROTTLED 0x00030046
+#define RPI_MBOX_GET_CLOCK_MEASURED 0x00030047
+#define RPI_MBOX_NOTIFY_REBOOT 0x00030048
+#define RPI_MBOX_GET_POE_HAT_VAL 0x00030049
+#define RPI_MBOX_SET_POE_HAT_VAL 0x00030050
#define RPI_MBOX_NOTIFY_XHCI_RESET 0x00030058
+#define RPI_MBOX_SET_CLOCK_STATE 0x00038001
#define RPI_MBOX_SET_CLOCK_RATE 0x00038002
+#define RPI_MBOX_SET_VOLTAGE 0x00038003
+#define RPI_MBOX_SET_TURBO 0x00038009
+#define RPI_MBOX_SET_CUSTOMER_OTP 0x00038021
+#define RPI_MBOX_SET_DOMAIN_STATE 0x00038030
#define RPI_MBOX_SET_GPIO 0x00038041
+#define RPI_MBOX_SET_SDHOST_CLOCK 0x00038042
+#define RPI_MBOX_SET_GPIO_CONFIG 0x00038043
+#define RPI_MBOX_SET_PERIPH_REG 0x00038045
+#define RPI_MBOX_ALLOC_FB 0x00040001
+#define RPI_MBOX_FB_BLANK 0x00040002
#define RPI_MBOX_GET_FB_GEOMETRY 0x00040003
-#define RPI_MBOX_GET_FB_LINELENGTH 0x00040008
+#define RPI_MBOX_GET_FB_VIRTUAL_WIDTH_HEIGHT 0x00040004
#define RPI_MBOX_GET_FB_COLOR_DEPTH 0x00040005
-#define RPI_MBOX_GET_FB_REGION 0x00040001
+#define RPI_MBOX_GET_FB_PIXEL_ORDER 0x00040006
+#define RPI_MBOX_GET_FB_ALPHA_MODE 0x00040007
+#define RPI_MBOX_GET_FB_LINELENGTH 0x00040008
+#define RPI_MBOX_GET_FB_VIRTUAL_OFFSET 0x00040009
+#define RPI_MBOX_GET_FB_OVERSCAN 0x0004000a
+#define RPI_MBOX_GET_FB_PALETTE 0x0004000b
+#define RPI_MBOX_GET_FB_TOUCHBUF 0x0004000f
+#define RPI_MBOX_GET_FB_GPIOVIRTBUF 0x00040010
+
+#define RPI_MBOX_TEST_FB_PHYSICAL_WIDTH_HEIGHT 0x00044003
+#define RPI_MBOX_TEST_FB_VIRTUAL_WIDTH_HEIGHT 0x00044004
+#define RPI_MBOX_TEST_FB_DEPTH 0x00044005
+#define RPI_MBOX_TEST_FB_PIXEL_ORDER 0x00044006
+#define RPI_MBOX_TEST_FB_ALPHA_MODE 0x00044007
+#define RPI_MBOX_TEST_FB_VIRTUAL_OFFSET 0x00044009
+#define RPI_MBOX_TEST_FB_OVERSCAN 0x0004400a
+#define RPI_MBOX_TEST_FB_PALETTE 0x0004400b
+#define RPI_MBOX_TEST_FB_VSYNC 0x0004400e
+#define RPI_MBOX_FREE_FB 0x00048001
#define RPI_MBOX_SET_FB_PGEOM 0x00048003
#define RPI_MBOX_SET_FB_VGEOM 0x00048004
#define RPI_MBOX_SET_FB_DEPTH 0x00048005
-#define RPI_MBOX_ALLOC_FB 0x00040001
-#define RPI_MBOX_FREE_FB 0x00048001
+#define RPI_MBOX_SET_FB_PIXEL_ORDER 0x00048006
+#define RPI_MBOX_SET_FB_ALPHA_MODE 0x00048007
+#define RPI_MBOX_SET_FB_VIRTUAL_OFFSET 0x00048009
+#define RPI_MBOX_SET_FB_OVERSCAN 0x0004800a
+#define RPI_MBOX_SET_FB_PALET TE 0x0004800b
+#define RPI_MBOX_VCHIQ_INIT 0x00048010
+#define RPI_MBOX_SET_FB_TOUCHBUF 0x0004801f
+#define RPI_MBOX_SET_FB_GPIOVIRTBUF 0x00048020
+#define RPI_MBOX_SET_FB_VSYNC 0x0004800e
+#define RPI_MBOX_SET_FB_BACKLIGHT 0x0004800f
#define RPI_MBOX_GET_COMMAND_LINE 0x00050001
+#define RPI_MBOX_GET_DMA_CHANNELS 0x00060001
+
#define RPI_MBOX_POWER_STATE_ENABLE BIT0
#define RPI_MBOX_POWER_STATE_WAIT BIT1
@@ -93,5 +161,21 @@
#define RPI_MBOX_CLOCK_RATE_SDRAM 0x000000008
#define RPI_MBOX_CLOCK_RATE_PIXEL 0x000000009
#define RPI_MBOX_CLOCK_RATE_PWM 0x00000000a
+#define RPI_MBOX_CLOCK_RATE_HEVC 0x00000000b
+#define RPI_MBOX_CLOCK_RATE_EMMC2 0x00000000c
+#define RPI_MBOX_CLOCK_RATE_M2MC 0x00000000d
+#define RPI_MBOX_CLOCK_RATE_PIXEL_BVB 0x00000000d
+
+#define RPI_EXP_GPIO_DIR_IN 0
+#define RPI_EXP_GPIO_DIR_OUT 1
+
+#define RPI_EXP_GPIO_BT 0
+#define RPI_EXP_GPIO_WIFI 1
+#define RPI_EXP_GPIO_LED 2
+#define RPI_EXP_GPIO_RESET 3
+#define RPI_EXP_GPIO_SD_VOLT 4
+#define RPI_EXP_GPIO_CAMERA 5
+#define RPI_EXP_GPIO_SD_POWER 6
+#define RPI_EXP_GPIO_POWER_LED 7
#endif /* __RASPBERRY_PI_MAILBOX_H__ */
--
2.13.7
-=-=-=-=-=-=
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68813): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68813&data=04%7C01%7Cawarkentin%40vmware.com%7C37bbadbcdf3c4394992308d8a0875585%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850412050013%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=8Z49IWiFpGqiotCQbGpVM3jW0%2F7imrrNhTal8spe9bQ%3D&reserved=0
Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964889%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7C37bbadbcdf3c4394992308d8a0875585%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850412050013%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=8znoOGR4qF8%2FVyGcUf37tgagVZ%2BhQBUOaXL7JfQz4Xs%3D&reserved=0
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7C37bbadbcdf3c4394992308d8a0875585%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850412050013%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Ov0gNDiq9CIooyxWSDtnYwpK0Ffh5nLPCsCDQs8ilVs%3D&reserved=0 [awarkentin@vmware.com]
-=-=-=-=-=-=
[-- Attachment #2: Type: text/html, Size: 31522 bytes --]
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 3/7] Platform/RaspberryPi: Split MMC register defintions
2020-12-14 23:23 ` [PATCH 3/7] Platform/RaspberryPi: Split MMC register defintions Jeremy Linton
@ 2020-12-15 18:17 ` Andrei Warkentin
0 siblings, 0 replies; 20+ messages in thread
From: Andrei Warkentin @ 2020-12-15 18:17 UTC (permalink / raw)
To: devel@edk2.groups.io, jeremy.linton@arm.com
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
[-- Attachment #1: Type: text/plain, Size: 8438 bytes --]
LGTM. This is the same approach I took last time I looked at this (unsuccessfully...)
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
________________________________
From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
Sent: Monday, December 14, 2020 5:23 PM
To: devel@edk2.groups.io <devel@edk2.groups.io>
Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
Subject: [edk2-devel] [PATCH 3/7] Platform/RaspberryPi: Split MMC register defintions
The current MMC (really SDHCI) defintions are tied to the
arasan controller. As we intend to reuse the definitions lets
make the base address configurable when the driver loads.
This assumes we won't ever want to run both the emmc2
and arasan sdhci controller at the same time.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
.../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c | 9 ++++-
.../Bcm283x/Include/IndustryStandard/Bcm2836Sdio.h | 42 ++++++++++++----------
2 files changed, 32 insertions(+), 19 deletions(-)
diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
index 88e9126e35..0cb7e85b38 100644
--- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
+++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
@@ -16,6 +16,7 @@ STATIC CARD_DETECT_STATE mCardDetectState = CardDetectRequired;
UINT32 LastExecutedCommand = (UINT32) -1;
STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
+STATIC UINTN MMCHS_BASE;
/**
These SD commands are optional, according to the SD Spec
@@ -763,7 +764,13 @@ MMCInitialize (
DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: MMCInitialize()\n"));
- if (!PcdGet32 (PcdSdIsArasan)) {
+ if (PcdGet32 (PcdSdIsArasan)) {
+ DEBUG ((DEBUG_INFO, "SD is routed to Arasan\n"));
+ MMCHS_BASE = MMCHS1_BASE;
+ } else if (RPI_MODEL == 4) {
+ DEBUG ((DEBUG_INFO, "SD is routed to emmc2\n"));
+ MMCHS_BASE = MMCHS2_BASE;
+ } else {
DEBUG ((DEBUG_INFO, "SD is not routed to Arasan\n"));
return EFI_REQUEST_UNLOAD_IMAGE;
}
diff --git a/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836Sdio.h b/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836Sdio.h
index fd07b47170..e6892d36cf 100644
--- a/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836Sdio.h
+++ b/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836Sdio.h
@@ -13,15 +13,18 @@
// MMC/SD/SDIO1 register definitions.
#define MMCHS1_OFFSET 0x00300000
+#define MMCHS2_OFFSET 0x00340000
#define MMCHS1_BASE (BCM2836_SOC_REGISTERS + MMCHS1_OFFSET)
+#define MMCHS2_BASE (BCM2836_SOC_REGISTERS + MMCHS2_OFFSET)
#define MMCHS1_LENGTH 0x00000100
+#define MMCHS2_LENGTH 0x00000100
-#define MMCHS_BLK (MMCHS1_BASE + 0x4)
+#define MMCHS_BLK (MMCHS_BASE + 0x4)
#define BLEN_512BYTES (0x200UL << 0)
-#define MMCHS_ARG (MMCHS1_BASE + 0x8)
+#define MMCHS_ARG (MMCHS_BASE + 0x8)
-#define MMCHS_CMD (MMCHS1_BASE + 0xC)
+#define MMCHS_CMD (MMCHS_BASE + 0xC)
#define BCE_ENABLE BIT1
#define DDIR_READ BIT4
#define DDIR_WRITE (0x0UL << 4)
@@ -43,13 +46,13 @@
#define INDX(CMD_INDX) (TYPE(CMD_TYPE_NORMAL) | _INDX(CMD_INDX))
#define INDX_ABORT(CMD_INDX) (TYPE(CMD_TYPE_ABORT) | _INDX(CMD_INDX))
-#define MMCHS_RSP10 (MMCHS1_BASE + 0x10)
-#define MMCHS_RSP32 (MMCHS1_BASE + 0x14)
-#define MMCHS_RSP54 (MMCHS1_BASE + 0x18)
-#define MMCHS_RSP76 (MMCHS1_BASE + 0x1C)
-#define MMCHS_DATA (MMCHS1_BASE + 0x20)
+#define MMCHS_RSP10 (MMCHS_BASE + 0x10)
+#define MMCHS_RSP32 (MMCHS_BASE + 0x14)
+#define MMCHS_RSP54 (MMCHS_BASE + 0x18)
+#define MMCHS_RSP76 (MMCHS_BASE + 0x1C)
+#define MMCHS_DATA (MMCHS_BASE + 0x20)
-#define MMCHS_PRES_STATE (MMCHS1_BASE + 0x24)
+#define MMCHS_PRES_STATE (MMCHS_BASE + 0x24)
#define CMDI_MASK BIT0
#define CMDI_ALLOWED (0x0UL << 0)
#define CMDI_NOT_ALLOWED BIT0
@@ -58,17 +61,19 @@
#define DATI_NOT_ALLOWED BIT1
#define WRITE_PROTECT_OFF BIT19
-#define MMCHS_HCTL (MMCHS1_BASE + 0x28)
+#define MMCHS_HCTL (MMCHS_BASE + 0x28)
#define DTW_1_BIT (0x0UL << 1)
#define DTW_4_BIT BIT1
#define SDBP_MASK BIT8
#define SDBP_OFF (0x0UL << 8)
#define SDBP_ON BIT8
+#define SDVS_MASK (0x7UL << 9)
#define SDVS_1_8_V (0x5UL << 9)
#define SDVS_3_0_V (0x6UL << 9)
+#define SDVS_3_3_V (0x7UL << 9)
#define IWE BIT24
-#define MMCHS_SYSCTL (MMCHS1_BASE + 0x2C)
+#define MMCHS_SYSCTL (MMCHS_BASE + 0x2C)
#define ICE BIT0
#define ICS_MASK BIT1
#define ICS BIT1
@@ -84,7 +89,7 @@
#define SRC BIT25
#define SRD BIT26
-#define MMCHS_INT_STAT (MMCHS1_BASE + 0x30)
+#define MMCHS_INT_STAT (MMCHS_BASE + 0x30)
#define CC BIT0
#define TC BIT1
#define BWR BIT4
@@ -96,7 +101,7 @@
#define DCRC BIT21
#define DEB BIT22
-#define MMCHS_IE (MMCHS1_BASE + 0x34)
+#define MMCHS_IE (MMCHS_BASE + 0x34)
#define CC_EN BIT0
#define TC_EN BIT1
#define BWR_EN BIT4
@@ -112,7 +117,7 @@
#define BADA_EN BIT29
#define ALL_EN 0xFFFFFFFF
-#define MMCHS_ISE (MMCHS1_BASE + 0x38)
+#define MMCHS_ISE (MMCHS_BASE + 0x38)
#define CC_SIGEN BIT0
#define TC_SIGEN BIT1
#define BWR_SIGEN BIT4
@@ -127,14 +132,15 @@
#define CERR_SIGEN BIT28
#define BADA_SIGEN BIT29
-#define MMCHS_AC12 (MMCHS1_BASE + 0x3C)
+#define MMCHS_AC12 (MMCHS_BASE + 0x3C)
+#define MMCHS_HC2R (MMCHS_BASE + 0x3E)
-#define MMCHS_CAPA (MMCHS1_BASE + 0x40)
+#define MMCHS_CAPA (MMCHS_BASE + 0x40)
#define VS30 BIT25
#define VS18 BIT26
-#define MMCHS_CUR_CAPA (MMCHS1_BASE + 0x48)
-#define MMCHS_REV (MMCHS1_BASE + 0xFC)
+#define MMCHS_CUR_CAPA (MMCHS_BASE + 0x48)
+#define MMCHS_REV (MMCHS_BASE + 0xFC)
#define BLOCK_COUNT_SHIFT 16
#define RCA_SHIFT 16
--
2.13.7
-=-=-=-=-=-=
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68815): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68815&data=04%7C01%7Cawarkentin%40vmware.com%7Cc9a59eeb9e614e62b75708d8a08756b5%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850422525834%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=jL1YSExGluO9mVGDOhCOVddnA2U8GpSSZYAnuKZ9wBE%3D&reserved=0
Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964892%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7Cc9a59eeb9e614e62b75708d8a08756b5%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850422525834%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=2AKbHlKdA4vorB%2BEogxgg21AAABKc7pPEcm1dazIVbM%3D&reserved=0
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7Cc9a59eeb9e614e62b75708d8a08756b5%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850422525834%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=fd9yYeQqrJsDzUFeEoC%2Fh9JAfk1lwVDQSRPC5ZcOYj8%3D&reserved=0 [awarkentin@vmware.com]
-=-=-=-=-=-=
[-- Attachment #2: Type: text/html, Size: 15888 bytes --]
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 2/7] Platform/RaspberryPi: Add further mailbox helpers
2020-12-14 23:23 ` [PATCH 2/7] Platform/RaspberryPi: Add further mailbox helpers Jeremy Linton
@ 2020-12-15 18:18 ` Andrei Warkentin
0 siblings, 0 replies; 20+ messages in thread
From: Andrei Warkentin @ 2020-12-15 18:18 UTC (permalink / raw)
To: devel@edk2.groups.io, jeremy.linton@arm.com
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
[-- Attachment #1: Type: text/plain, Size: 12898 bytes --]
LGTM. Seems reasonable.
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
________________________________
From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
Sent: Monday, December 14, 2020 5:23 PM
To: devel@edk2.groups.io <devel@edk2.groups.io>
Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
Subject: [edk2-devel] [PATCH 2/7] Platform/RaspberryPi: Add further mailbox helpers
Lets add some further mailbox helpers and convert the existing
RpiFirmwareSetLed into a generic SetGpio() function.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
.../Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 240 ++++++++++++++++++++-
.../RaspberryPi/Include/Protocol/RpiFirmware.h | 25 +++
2 files changed, 255 insertions(+), 10 deletions(-)
diff --git a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
index ade91c9f34..bf74148bbb 100644
--- a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
+++ b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
@@ -1090,7 +1090,6 @@ RpiFirmwareSetClockRate (
return EFI_SUCCESS;
}
-
#pragma pack()
typedef struct {
UINT32 ClockId;
@@ -1152,6 +1151,17 @@ RpiFirmwareGetClockRate (
STATIC
EFI_STATUS
EFIAPI
+RpiFirmwareGetCurrentClockState (
+ IN UINT32 ClockId,
+ OUT UINT32 *ClockState
+ )
+{
+ return RpiFirmwareGetClockRate (ClockId, RPI_MBOX_GET_CLOCK_STATE, ClockState);
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
RpiFirmwareGetCurrentClockRate (
IN UINT32 ClockId,
OUT UINT32 *ClockRate
@@ -1181,6 +1191,63 @@ RpiFirmwareGetMinClockRate (
{
return RpiFirmwareGetClockRate (ClockId, RPI_MBOX_GET_MIN_CLOCK_RATE, ClockRate);
}
+
+#pragma pack()
+typedef struct {
+ UINT32 ClockId;
+ UINT32 ClockState;
+} RPI_FW_GET_CLOCK_STATE_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_GET_CLOCK_STATE_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_SET_CLOCK_STATE_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+RpiFirmwareSetClockState (
+ IN UINT32 ClockId,
+ IN UINT32 ClockState
+ )
+{
+ RPI_FW_SET_CLOCK_STATE_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof (*Cmd));
+
+ Cmd->BufferHead.BufferSize = sizeof (*Cmd);
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_MBOX_SET_CLOCK_STATE;
+ Cmd->TagHead.TagSize = sizeof (Cmd->TagBody);
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->TagBody.ClockId = ClockId;
+ Cmd->TagBody.ClockState = ClockState;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
#pragma pack()
typedef struct {
@@ -1199,8 +1266,9 @@ typedef struct {
STATIC
VOID
EFIAPI
-RpiFirmwareSetLed (
- IN BOOLEAN On
+RpiFirmwareSetGpio (
+ IN UINT32 Gpio,
+ IN BOOLEAN State
)
{
RPI_FW_SET_GPIO_CMD *Cmd;
@@ -1220,14 +1288,10 @@ RpiFirmwareSetLed (
Cmd->TagHead.TagId = RPI_MBOX_SET_GPIO;
Cmd->TagHead.TagSize = sizeof (Cmd->TagBody);
/*
- * GPIO_PIN_2 = Activity LED
- * GPIO_PIN_4 = HDMI Detect (Input / Active Low)
- * GPIO_PIN_7 = Power LED (Input / Active Low)
- *
* There's also a 128 pin offset.
*/
- Cmd->TagBody.Pin = 128 + 2;
- Cmd->TagBody.State = On;
+ Cmd->TagBody.Pin = 128 + Gpio;
+ Cmd->TagBody.State = State;
Cmd->TagHead.TagValueSize = 0;
Cmd->EndTag = 0;
@@ -1242,6 +1306,16 @@ RpiFirmwareSetLed (
__FUNCTION__, Status, Cmd->BufferHead.Response));
}
}
+
+STATIC
+VOID
+EFIAPI
+RpiFirmwareSetLed (
+ IN BOOLEAN On
+ )
+{
+ RpiFirmwareSetGpio (RPI_EXP_GPIO_LED, On);
+}
#pragma pack()
typedef struct {
@@ -1299,6 +1373,149 @@ RpiFirmwareNotifyXhciReset (
return Status;
}
+#pragma pack()
+typedef struct {
+ UINT32 Gpio;
+ UINT32 Direction;
+ UINT32 Polarity;
+ UINT32 TermEn;
+ UINT32 TermPullUp;
+} RPI_FW_GPIO_GET_CFG_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_GPIO_GET_CFG_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_NOTIFY_GPIO_GET_CFG_CMD;
+#pragma pack()
+
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareNotifyGpioGetCfg (
+ IN UINTN Gpio,
+ IN UINT32 *Polarity
+ )
+{
+ RPI_FW_NOTIFY_GPIO_GET_CFG_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof (*Cmd));
+
+ Cmd->BufferHead.BufferSize = sizeof (*Cmd);
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_MBOX_GET_GPIO_CONFIG;
+ Cmd->TagHead.TagSize = sizeof (Cmd->TagBody);
+ Cmd->TagBody.Gpio = 128 + Gpio;
+
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result);
+
+ *Polarity = Cmd->TagBody.Polarity;
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ }
+
+ return Status;
+}
+
+
+#pragma pack()
+typedef struct {
+ UINT32 Gpio;
+ UINT32 Direction;
+ UINT32 Polarity;
+ UINT32 TermEn;
+ UINT32 TermPullUp;
+ UINT32 State;
+} RPI_FW_GPIO_SET_CFG_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_GPIO_SET_CFG_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_NOTIFY_GPIO_SET_CFG_CMD;
+#pragma pack()
+
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareNotifyGpioSetCfg (
+ IN UINTN Gpio,
+ IN UINTN Direction,
+ IN UINTN State
+ )
+{
+ RPI_FW_NOTIFY_GPIO_SET_CFG_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ Status = RpiFirmwareNotifyGpioGetCfg (Gpio, &Result);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: Failed to get GPIO polarity\n", __FUNCTION__));
+ Result = 0; //default polarity
+ }
+
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof (*Cmd));
+
+ Cmd->BufferHead.BufferSize = sizeof (*Cmd);
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_MBOX_SET_GPIO_CONFIG;
+ Cmd->TagHead.TagSize = sizeof (Cmd->TagBody);
+
+ Cmd->TagBody.Gpio = 128 + Gpio;
+ Cmd->TagBody.Direction = Direction;
+ Cmd->TagBody.Polarity = Result;
+ Cmd->TagBody.TermEn = 0;
+ Cmd->TagBody.TermPullUp = 0;
+ Cmd->TagBody.State = State;
+
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ }
+
+ RpiFirmwareSetGpio (Gpio,!State);
+
+
+ return Status;
+}
+
STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL mRpiFirmwareProtocol = {
RpiFirmwareSetPowerState,
RpiFirmwareGetMacAddress,
@@ -1321,7 +1538,10 @@ STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL mRpiFirmwareProtocol = {
RpiFirmwareGetCpuName,
RpiFirmwareGetArmMemory,
RPiFirmwareGetModelInstalledMB,
- RpiFirmwareNotifyXhciReset
+ RpiFirmwareNotifyXhciReset,
+ RpiFirmwareGetCurrentClockState,
+ RpiFirmwareSetClockState,
+ RpiFirmwareNotifyGpioSetCfg
};
/**
diff --git a/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h b/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h
index 56a8d15a38..d841608e57 100644
--- a/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h
+++ b/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h
@@ -37,6 +37,20 @@ EFI_STATUS
typedef
EFI_STATUS
+(EFIAPI *GET_CLOCK_STATE) (
+ IN UINT32 ClockId,
+ OUT UINT32 *ClockState
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *SET_CLOCK_STATE) (
+ IN UINT32 ClockId,
+ IN UINT32 ClockState
+ );
+
+typedef
+EFI_STATUS
(EFIAPI *GET_CLOCK_RATE) (
IN UINT32 ClockId,
OUT UINT32 *ClockRate
@@ -149,6 +163,14 @@ EFI_STATUS
UINTN FunctionNumber
);
+typedef
+EFI_STATUS
+(EFIAPI *GPIO_SET_CFG) (
+ UINTN Gpio,
+ UINTN Direction,
+ UINTN State
+ );
+
typedef struct {
SET_POWER_STATE SetPowerState;
GET_MAC_ADDRESS GetMacAddress;
@@ -172,6 +194,9 @@ typedef struct {
GET_ARM_MEM GetArmMem;
GET_MODEL_INSTALLED_MB GetModelInstalledMB;
NOTIFY_XHCI_RESET NotifyXhciReset;
+ GET_CLOCK_STATE GetClockState;
+ SET_CLOCK_STATE SetClockState;
+ GPIO_SET_CFG SetGpioConfig;
} RASPBERRY_PI_FIRMWARE_PROTOCOL;
extern EFI_GUID gRaspberryPiFirmwareProtocolGuid;
--
2.13.7
-=-=-=-=-=-=
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68814): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68814&data=04%7C01%7Cawarkentin%40vmware.com%7Cd008b6c3109a4d90740b08d8a08755fc%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850424785824%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=iJY0BHT2JMnlQXHGFAjB1b0LF5yqTAKpxSoHVThwXHI%3D&reserved=0
Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964891%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7Cd008b6c3109a4d90740b08d8a08755fc%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850424785824%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=xC9ynLadafljUyR%2BOqCDFmgIxzCCiXtaJFo%2Brq%2BeGjE%3D&reserved=0
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7Cd008b6c3109a4d90740b08d8a08755fc%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850424785824%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=YxVZVIiiwGR37p34ccfqVIbjrCaS%2FYNF64CBf99ebq0%3D&reserved=0 [awarkentin@vmware.com]
-=-=-=-=-=-=
[-- Attachment #2: Type: text/html, Size: 24122 bytes --]
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 5/7] Platform/RaspberryPi/Arasan: Select the correct base frequency
2020-12-14 23:23 ` [PATCH 5/7] Platform/RaspberryPi/Arasan: Select the correct base frequency Jeremy Linton
@ 2020-12-15 18:18 ` Andrei Warkentin
0 siblings, 0 replies; 20+ messages in thread
From: Andrei Warkentin @ 2020-12-15 18:18 UTC (permalink / raw)
To: devel@edk2.groups.io, jeremy.linton@arm.com
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
[-- Attachment #1: Type: text/plain, Size: 3785 bytes --]
LGTM
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
________________________________
From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
Sent: Monday, December 14, 2020 5:23 PM
To: devel@edk2.groups.io <devel@edk2.groups.io>
Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
Subject: [edk2-devel] [PATCH 5/7] Platform/RaspberryPi/Arasan: Select the correct base frequency
The firmware reports the emmc2 frequency with a slightly
different mailbox command, lets select the correct one
based on which controller we are binding to.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
.../RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
index a7b538a91a..b0f03cefc9 100644
--- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
+++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
@@ -250,7 +250,11 @@ CalculateClockFrequencyDivisor (
UINT32 Divisor;
UINT32 BaseFrequency = 0;
- Status = mFwProtocol->GetClockRate (RPI_MBOX_CLOCK_RATE_EMMC, &BaseFrequency);
+ if (PcdGet32 (PcdSdIsArasan)) {
+ Status = mFwProtocol->GetClockRate (RPI_MBOX_CLOCK_RATE_EMMC, &BaseFrequency);
+ } else {
+ Status = mFwProtocol->GetClockRate (RPI_MBOX_CLOCK_RATE_EMMC2, &BaseFrequency);
+ }
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "Couldn't get RPI_MBOX_CLOCK_RATE_EMMC\n"));
return Status;
@@ -472,8 +476,8 @@ MMCNotifyState (
switch (State) {
case MmcHwInitializationState:
{
- EFI_STATUS Status;
- UINT32 Divisor;
+
+ DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: current divisor %x\n", MmioRead32(MMCHS_SYSCTL)));
Status = SoftReset (SRA);
if (EFI_ERROR (Status)) {
--
2.13.7
-=-=-=-=-=-=
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68817): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68817&data=04%7C01%7Cawarkentin%40vmware.com%7C3e52cf5f8620415a603f08d8a0875747%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850451597004%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=YxlrM8qbYHtMl1ULi3pTnHnJyyepSmSxsSc3hPnqdY8%3D&reserved=0
Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964894%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7C3e52cf5f8620415a603f08d8a0875747%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850451597004%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=MFG8KdTLIf%2FzzP5taWbyHf94q%2FMd3CR%2B9l76FhBLlqg%3D&reserved=0
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7C3e52cf5f8620415a603f08d8a0875747%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850451597004%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=18%2F5sdBQAPKGtwJDGPqwqWmLpLQeWDVGm1PQmZp%2B%2BUM%3D&reserved=0 [awarkentin@vmware.com]
-=-=-=-=-=-=
[-- Attachment #2: Type: text/html, Size: 6784 bytes --]
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 7/7] Platform/RaspberryPi: Correct device path removal.
2020-12-14 23:23 ` [PATCH 7/7] Platform/RaspberryPi: Correct device path removal Jeremy Linton
@ 2020-12-15 18:19 ` Andrei Warkentin
0 siblings, 0 replies; 20+ messages in thread
From: Andrei Warkentin @ 2020-12-15 18:19 UTC (permalink / raw)
To: devel@edk2.groups.io, jeremy.linton@arm.com
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
[-- Attachment #1: Type: text/plain, Size: 3432 bytes --]
LGTM
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
________________________________
From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
Sent: Monday, December 14, 2020 5:23 PM
To: devel@edk2.groups.io <devel@edk2.groups.io>
Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
Subject: [edk2-devel] [PATCH 7/7] Platform/RaspberryPi: Correct device path removal.
The "arasan" driver now works with the emmc2 device.
This means that both the PcdSdIsArasan and the
!PcdSdIsArasan result in valid SD controllers on the rpi4.
Lets avoid removing the "stale" boot entry, in this case
which also has the side effect of avoiding a boot assert
when emmc2 is selected.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
Platform/RaspberryPi/Library/PlatformBootManagerLib/PlatformBm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Platform/RaspberryPi/Library/PlatformBootManagerLib/PlatformBm.c b/Platform/RaspberryPi/Library/PlatformBootManagerLib/PlatformBm.c
index fa46be7917..c2fc40b8ea 100644
--- a/Platform/RaspberryPi/Library/PlatformBootManagerLib/PlatformBm.c
+++ b/Platform/RaspberryPi/Library/PlatformBootManagerLib/PlatformBm.c
@@ -431,7 +431,7 @@ RemoveStaleBootOptions (
EFI_DEVICE_PATH_PROTOCOL *DevicePath = BootOptions[Index].FilePath;
if (CompareMem (&mArasan, DevicePath, GetDevicePathSize (DevicePath)) == 0) {
- if (PcdGet32 (PcdSdIsArasan)) {
+ if (PcdGet32 (PcdSdIsArasan) || RPI_MODEL == 4) {
continue;
}
} else if (CompareMem (&mSDHost, DevicePath, GetDevicePathSize (DevicePath)) == 0) {
--
2.13.7
-=-=-=-=-=-=
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68819): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68819&data=04%7C01%7Cawarkentin%40vmware.com%7Cdab0e33c11a44f3c745208d8a0875815%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850452609234%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=JnEy1ggO05LRNBxNj7EfQRQSKys48mjnVQgPsnTmL4k%3D&reserved=0
Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964896%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7Cdab0e33c11a44f3c745208d8a0875815%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850452609234%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=nnW4LmTnA%2BnxaLjhlLlHOiru5Rdx7FQLX1JTSTzDCvQ%3D&reserved=0
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7Cdab0e33c11a44f3c745208d8a0875815%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850452609234%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=evhGhiInBiwlnupjx0eBedSkMzOr5RCpLNyhYLV%2Btro%3D&reserved=0 [awarkentin@vmware.com]
-=-=-=-=-=-=
[-- Attachment #2: Type: text/html, Size: 6174 bytes --]
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
2020-12-14 23:23 ` [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs Jeremy Linton
@ 2020-12-15 18:21 ` Andrei Warkentin
2020-12-15 18:55 ` Jeremy Linton
0 siblings, 1 reply; 20+ messages in thread
From: Andrei Warkentin @ 2020-12-15 18:21 UTC (permalink / raw)
To: devel@edk2.groups.io, jeremy.linton@arm.com
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
[-- Attachment #1: Type: text/plain, Size: 3591 bytes --]
Could we rework some of these magic constants? Esp the SetPowerState ones.
Do we need both EMMC and EMMC2 clocks enabled all the time?
A
________________________________
From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
Sent: Monday, December 14, 2020 5:23 PM
To: devel@edk2.groups.io <devel@edk2.groups.io>
Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
Subject: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
It seems we should be powering up the sd cards, and possibly
the clocks as well to assure they are setup properly before
we attempt to access the controller.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
index 28f57438c5..8829740938 100644
--- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
+++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
@@ -552,6 +552,15 @@ ApplyVariables (
GpioPinFuncSet (37, GPIO_FSEL_ALT3);
GpioPinFuncSet (38, GPIO_FSEL_ALT3);
GpioPinFuncSet (39, GPIO_FSEL_ALT3);
+
+ /*
+ * power and clock everything by default
+ */
+ Status = mFwProtocol->SetPowerState (0, 1, 1); //SD on
+ Status = mFwProtocol->SetGpioConfig (RPI_EXP_GPIO_SD_VOLT,
+ RPI_EXP_GPIO_DIR_OUT, 1); //3.3v
+ Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC2, 1);
+ Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC, 1);
}
} else {
DEBUG ((DEBUG_ERROR, "Model Family %d not supported...\n", mModelFamily));
--
2.13.7
-=-=-=-=-=-=
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68818): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68818&data=04%7C01%7Cawarkentin%40vmware.com%7C09a7a2483d704affef4e08d8a0875810%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850454110853%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=MYuBr4R6LYw8l3pWORpmGzLTyvljJCffHUODVQk%2BjxQ%3D&reserved=0
Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964895%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7C09a7a2483d704affef4e08d8a0875810%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850454110853%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=MRu43d1ZNnFvGE3K9JJCXIUXvE2bZ6xWUzWtVxkNf7E%3D&reserved=0
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7C09a7a2483d704affef4e08d8a0875810%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850454110853%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=5g23ev8pYF4L%2B2rNNABCccLjr1VMPZ1nfbV%2BfUlwqmU%3D&reserved=0 [awarkentin@vmware.com]
-=-=-=-=-=-=
[-- Attachment #2: Type: text/html, Size: 6767 bytes --]
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 4/7] Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config
2020-12-14 23:23 ` [PATCH 4/7] Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config Jeremy Linton
@ 2020-12-15 18:26 ` Andrei Warkentin
2020-12-15 18:46 ` Jeremy Linton
0 siblings, 1 reply; 20+ messages in thread
From: Andrei Warkentin @ 2020-12-15 18:26 UTC (permalink / raw)
To: devel@edk2.groups.io, jeremy.linton@arm.com
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
[-- Attachment #1: Type: text/plain, Size: 11258 bytes --]
I believe that applies only to the Arasan integration, not MMC2.
I'm trying to recollect why I thought this didn't matter (or how it was getting mitigated), but i'm drawing a blank. I'm okay doing it.
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
________________________________
From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
Sent: Monday, December 14, 2020 5:23 PM
To: devel@edk2.groups.io <devel@edk2.groups.io>
Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
Subject: [edk2-devel] [PATCH 4/7] Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config
The uboot and linux drivers have notes that there is a clock domain crossing
problem that happens with back to back writes to the sd controllers on the
rpi. Its not clear if this is still applicable to the rpi4/emmc2 but
it seems wise to add it.
Futher, we need to assure that the card voltage is set to 3.3V, and
we should try and follow some of the SDHCI docs when it comes to
changing the clock.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
.../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c | 112 +++++++++++++++++----
.../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h | 1 +
2 files changed, 93 insertions(+), 20 deletions(-)
diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
index 0cb7e85b38..a7b538a91a 100644
--- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
+++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
@@ -18,6 +18,56 @@ UINT32 LastExecutedCommand = (UINT32) -1;
STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
STATIC UINTN MMCHS_BASE;
+STATIC
+UINT32
+EFIAPI
+SdMmioWrite32 (
+ IN UINTN Address,
+ IN UINT32 Value
+ )
+{
+ UINT32 ret;
+ ret = (UINT32)MmioWrite32 (Address, Value);
+ // There is a bug about clock domain crossing on writes, delay to avoid it
+ gBS->Stall (STALL_AFTER_REG_WRITE_US);
+ return ret;
+}
+
+STATIC
+UINT32
+EFIAPI
+SdMmioOr32 (
+ IN UINTN Address,
+ IN UINT32 OrData
+ )
+{
+ return SdMmioWrite32 (Address, MmioRead32 (Address) | OrData);
+}
+
+STATIC
+UINT32
+EFIAPI
+SdMmioAnd32 (
+ IN UINTN Address,
+ IN UINT32 AndData
+ )
+{
+ return SdMmioWrite32 (Address, MmioRead32 (Address) & AndData);
+}
+
+STATIC
+UINT32
+EFIAPI
+SdMmioAndThenOr32 (
+ IN UINTN Address,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return SdMmioWrite32 (Address, (MmioRead32 (Address) & AndData) | OrData);
+}
+
+
/**
These SD commands are optional, according to the SD Spec
**/
@@ -175,7 +225,9 @@ SoftReset (
IN UINT32 Mask
)
{
- MmioOr32 (MMCHS_SYSCTL, Mask);
+ DEBUG ((DEBUG_MMCHOST_SD, "SoftReset with mask 0x%x\n", Mask));
+
+ SdMmioOr32 (MMCHS_SYSCTL, Mask);
if (PollRegisterWithMask (MMCHS_SYSCTL, Mask, 0) == EFI_TIMEOUT) {
DEBUG ((DEBUG_ERROR, "Failed to SoftReset with mask 0x%x\n", Mask));
return EFI_TIMEOUT;
@@ -326,29 +378,29 @@ MMCSendCommand (
}
if (IsAppCmd && MmcCmd == ACMD22) {
- MmioWrite32 (MMCHS_BLK, 4);
+ SdMmioWrite32 (MMCHS_BLK, 4);
} else if (IsAppCmd && MmcCmd == ACMD51) {
- MmioWrite32 (MMCHS_BLK, 8);
+ SdMmioWrite32 (MMCHS_BLK, 8);
} else if (!IsAppCmd && MmcCmd == CMD6) {
- MmioWrite32 (MMCHS_BLK, 64);
+ SdMmioWrite32 (MMCHS_BLK, 64);
} else if (IsADTCCmd) {
- MmioWrite32 (MMCHS_BLK, BLEN_512BYTES);
+ SdMmioWrite32 (MMCHS_BLK, BLEN_512BYTES);
}
// Set Data timeout counter value to max value.
- MmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~DTO_MASK, DTO_VAL);
+ SdMmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~DTO_MASK, DTO_VAL);
//
// Clear Interrupt Status Register, but not the Card Inserted bit
// to avoid messing with card detection logic.
//
- MmioWrite32 (MMCHS_INT_STAT, ALL_EN & ~(CARD_INS));
+ SdMmioWrite32 (MMCHS_INT_STAT, ALL_EN & ~(CARD_INS));
// Set command argument register
- MmioWrite32 (MMCHS_ARG, Argument);
+ SdMmioWrite32 (MMCHS_ARG, Argument);
// Send the command
- MmioWrite32 (MMCHS_CMD, MmcCmd);
+ SdMmioWrite32 (MMCHS_CMD, MmcCmd);
// Check for the command status.
while (RetryCount < MAX_RETRY_COUNT) {
@@ -373,7 +425,7 @@ MMCSendCommand (
// Check if command is completed.
if ((MmcStatus & CC) == CC) {
- MmioWrite32 (MMCHS_INT_STAT, CC);
+ SdMmioWrite32 (MMCHS_INT_STAT, CC);
break;
}
@@ -428,6 +480,21 @@ MMCNotifyState (
return Status;
}
+ DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: CAP %X CAPH %X\n", MmioRead32(MMCHS_CAPA),MmioRead32(MMCHS_CUR_CAPA)));
+
+ // Lets switch to card detect test mode.
+ SdMmioOr32 (MMCHS_HCTL, BIT7|BIT6);
+
+ // set card voltage
+ SdMmioAnd32 (MMCHS_HCTL, ~SDBP_ON);
+ SdMmioAndThenOr32 (MMCHS_HCTL, (UINT32) ~SDBP_MASK, SDVS_3_3_V);
+ SdMmioOr32 (MMCHS_HCTL, SDBP_ON);
+
+ DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: AC12 %X HCTL %X\n", MmioRead32(MMCHS_AC12),MmioRead32(MMCHS_HCTL)));
+
+ // First turn off the clock
+ SdMmioAnd32 (MMCHS_SYSCTL, ~CEN);
+
// Attempt to set the clock to 400Khz which is the expected initialization speed
Status = CalculateClockFrequencyDivisor (400000, &Divisor, NULL);
if (EFI_ERROR (Status)) {
@@ -436,10 +503,15 @@ MMCNotifyState (
}
// Set Data Timeout Counter value, set clock frequency, enable internal clock
- MmioOr32 (MMCHS_SYSCTL, DTO_VAL | Divisor | CEN | ICS | ICE);
+ SdMmioOr32 (MMCHS_SYSCTL, DTO_VAL | Divisor | CEN | ICS | ICE);
+ SdMmioOr32 (MMCHS_HCTL, SDBP_ON);
+ // wait for ICS
+ while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);
+
+ DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: AC12 %X HCTL %X\n", MmioRead32(MMCHS_AC12),MmioRead32(MMCHS_HCTL)));
// Enable interrupts
- MmioWrite32 (MMCHS_IE, ALL_EN);
+ SdMmioWrite32 (MMCHS_IE, ALL_EN);
}
break;
case MmcIdleState:
@@ -452,7 +524,7 @@ MMCNotifyState (
ClockFrequency = 25000000;
// First turn off the clock
- MmioAnd32 (MMCHS_SYSCTL, ~CEN);
+ SdMmioAnd32 (MMCHS_SYSCTL, ~CEN);
Status = CalculateClockFrequencyDivisor (ClockFrequency, &Divisor, NULL);
if (EFI_ERROR (Status)) {
@@ -462,13 +534,13 @@ MMCNotifyState (
}
// Setup new divisor
- MmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~CLKD_MASK, Divisor);
+ SdMmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~CLKD_MASK, Divisor);
// Wait for the clock to stabilise
while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);
// Set Data Timeout Counter value, set clock frequency, enable internal clock
- MmioOr32 (MMCHS_SYSCTL, CEN);
+ SdMmioOr32 (MMCHS_SYSCTL, CEN);
break;
case MmcTransferState:
break;
@@ -635,7 +707,7 @@ MMCReadBlockData (
while (RetryCount < MAX_RETRY_COUNT) {
MmcStatus = MmioRead32 (MMCHS_INT_STAT);
if ((MmcStatus & BRR) != 0) {
- MmioWrite32 (MMCHS_INT_STAT, BRR);
+ SdMmioWrite32 (MMCHS_INT_STAT, BRR);
/*
* Data is ready.
*/
@@ -662,7 +734,7 @@ MMCReadBlockData (
gBS->Stall (STALL_AFTER_READ_US);
}
- MmioWrite32 (MMCHS_INT_STAT, BRR);
+ SdMmioWrite32 (MMCHS_INT_STAT, BRR);
return EFI_SUCCESS;
}
@@ -699,13 +771,13 @@ MMCWriteBlockData (
while (RetryCount < MAX_RETRY_COUNT) {
MmcStatus = MmioRead32 (MMCHS_INT_STAT);
if ((MmcStatus & BWR) != 0) {
- MmioWrite32 (MMCHS_INT_STAT, BWR);
+ SdMmioWrite32 (MMCHS_INT_STAT, BWR);
/*
* Can write data.
*/
mFwProtocol->SetLed (TRUE);
for (Count = 0; Count < BlockLen; Count += 4, Buffer++) {
- MmioWrite32 (MMCHS_DATA, *Buffer);
+ SdMmioWrite32 (MMCHS_DATA, *Buffer);
}
mFwProtocol->SetLed (FALSE);
@@ -726,7 +798,7 @@ MMCWriteBlockData (
gBS->Stall (STALL_AFTER_WRITE_US);
}
- MmioWrite32 (MMCHS_INT_STAT, BWR);
+ SdMmioWrite32 (MMCHS_INT_STAT, BWR);
return EFI_SUCCESS;
}
diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
index 6cd600f738..e94606cc5b 100644
--- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
+++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
@@ -37,6 +37,7 @@
#define STALL_AFTER_REC_RESP_US (50)
#define STALL_AFTER_WRITE_US (200)
#define STALL_AFTER_READ_US (20)
+#define STALL_AFTER_REG_WRITE_US (10)
#define STALL_AFTER_RETRY_US (20)
#define MAX_DIVISOR_VALUE 1023
--
2.13.7
-=-=-=-=-=-=
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68816): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68816&data=04%7C01%7Cawarkentin%40vmware.com%7C121bf8f78f3b437be80708d8a0875a08%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850504293478%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=6UBUDOHEs8MHLhK7%2B9DkL4NAdxzwttiJRvE88aqD%2BHw%3D&reserved=0
Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964893%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7C121bf8f78f3b437be80708d8a0875a08%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850504293478%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=OVqu67c28Qqnk25HasY%2BxkEC0KgOBQfxZWJxGZ0nJlk%3D&reserved=0
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7C121bf8f78f3b437be80708d8a0875a08%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850504293478%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=aXFzE1B1xX6JQeXymAEmWa2Z99welypR6HTHXrv1%2B7E%3D&reserved=0 [awarkentin@vmware.com]
-=-=-=-=-=-=
[-- Attachment #2: Type: text/html, Size: 19905 bytes --]
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 4/7] Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config
2020-12-15 18:26 ` [edk2-devel] " Andrei Warkentin
@ 2020-12-15 18:46 ` Jeremy Linton
2020-12-15 18:52 ` Andrei Warkentin
0 siblings, 1 reply; 20+ messages in thread
From: Jeremy Linton @ 2020-12-15 18:46 UTC (permalink / raw)
To: Andrei Warkentin, devel@edk2.groups.io
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
Hi,
On 12/15/20 12:26 PM, Andrei Warkentin wrote:
> I believe that applies only to the Arasan integration, not MMC2.
>
> I'm trying to recollect why I thought this didn't matter (or how it was getting mitigated), but i'm drawing a blank. I'm okay doing it.
Well, I think it "works" without it, although it appears both uboot and
linux have similar workarounds for both controllers. So "works" might be
a case of works for me but not for you. That is a large part of the
problem around using PNP0D40 as the _CID too. It works for both
controllers, despite the lack of careful alignment controls, or this
workaround in linux with the straight sdhci_acpi driver. If I can figure
out how to suppress/quirk the cmd12 warnings the emmc2 it would almost
be worth doing.
A good part of this set is just based on me banging my head and
inserting trace/prints in the linux and uboot gpio/mailbox and mmc
paths, and then supporting the most obvious differences. So while I
backed a few things out, some of these things remain (like this) because
there is a bit of documentation in those drivers claiming there is a
clock domain crossing bug. What the actual details, or how to reproduce
aren't included.
>
> Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
> ________________________________
> From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
> Sent: Monday, December 14, 2020 5:23 PM
> To: devel@edk2.groups.io <devel@edk2.groups.io>
> Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
> Subject: [edk2-devel] [PATCH 4/7] Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config
>
> The uboot and linux drivers have notes that there is a clock domain crossing
> problem that happens with back to back writes to the sd controllers on the
> rpi. Its not clear if this is still applicable to the rpi4/emmc2 but
> it seems wise to add it.
>
> Futher, we need to assure that the card voltage is set to 3.3V, and
> we should try and follow some of the SDHCI docs when it comes to
> changing the clock.
>
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
> .../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c | 112 +++++++++++++++++----
> .../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h | 1 +
> 2 files changed, 93 insertions(+), 20 deletions(-)
>
> diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
> index 0cb7e85b38..a7b538a91a 100644
> --- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
> +++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
> @@ -18,6 +18,56 @@ UINT32 LastExecutedCommand = (UINT32) -1;
> STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
>
> STATIC UINTN MMCHS_BASE;
>
>
>
> +STATIC
>
> +UINT32
>
> +EFIAPI
>
> +SdMmioWrite32 (
>
> + IN UINTN Address,
>
> + IN UINT32 Value
>
> + )
>
> +{
>
> + UINT32 ret;
>
> + ret = (UINT32)MmioWrite32 (Address, Value);
>
> + // There is a bug about clock domain crossing on writes, delay to avoid it
>
> + gBS->Stall (STALL_AFTER_REG_WRITE_US);
>
> + return ret;
>
> +}
>
> +
>
> +STATIC
>
> +UINT32
>
> +EFIAPI
>
> +SdMmioOr32 (
>
> + IN UINTN Address,
>
> + IN UINT32 OrData
>
> + )
>
> +{
>
> + return SdMmioWrite32 (Address, MmioRead32 (Address) | OrData);
>
> +}
>
> +
>
> +STATIC
>
> +UINT32
>
> +EFIAPI
>
> +SdMmioAnd32 (
>
> + IN UINTN Address,
>
> + IN UINT32 AndData
>
> + )
>
> +{
>
> + return SdMmioWrite32 (Address, MmioRead32 (Address) & AndData);
>
> +}
>
> +
>
> +STATIC
>
> +UINT32
>
> +EFIAPI
>
> +SdMmioAndThenOr32 (
>
> + IN UINTN Address,
>
> + IN UINT32 AndData,
>
> + IN UINT32 OrData
>
> + )
>
> +{
>
> + return SdMmioWrite32 (Address, (MmioRead32 (Address) & AndData) | OrData);
>
> +}
>
> +
>
> +
>
> /**
>
> These SD commands are optional, according to the SD Spec
>
> **/
>
> @@ -175,7 +225,9 @@ SoftReset (
> IN UINT32 Mask
>
> )
>
> {
>
> - MmioOr32 (MMCHS_SYSCTL, Mask);
>
> + DEBUG ((DEBUG_MMCHOST_SD, "SoftReset with mask 0x%x\n", Mask));
>
> +
>
> + SdMmioOr32 (MMCHS_SYSCTL, Mask);
>
> if (PollRegisterWithMask (MMCHS_SYSCTL, Mask, 0) == EFI_TIMEOUT) {
>
> DEBUG ((DEBUG_ERROR, "Failed to SoftReset with mask 0x%x\n", Mask));
>
> return EFI_TIMEOUT;
>
> @@ -326,29 +378,29 @@ MMCSendCommand (
> }
>
>
>
> if (IsAppCmd && MmcCmd == ACMD22) {
>
> - MmioWrite32 (MMCHS_BLK, 4);
>
> + SdMmioWrite32 (MMCHS_BLK, 4);
>
> } else if (IsAppCmd && MmcCmd == ACMD51) {
>
> - MmioWrite32 (MMCHS_BLK, 8);
>
> + SdMmioWrite32 (MMCHS_BLK, 8);
>
> } else if (!IsAppCmd && MmcCmd == CMD6) {
>
> - MmioWrite32 (MMCHS_BLK, 64);
>
> + SdMmioWrite32 (MMCHS_BLK, 64);
>
> } else if (IsADTCCmd) {
>
> - MmioWrite32 (MMCHS_BLK, BLEN_512BYTES);
>
> + SdMmioWrite32 (MMCHS_BLK, BLEN_512BYTES);
>
> }
>
>
>
> // Set Data timeout counter value to max value.
>
> - MmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~DTO_MASK, DTO_VAL);
>
> + SdMmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~DTO_MASK, DTO_VAL);
>
>
>
> //
>
> // Clear Interrupt Status Register, but not the Card Inserted bit
>
> // to avoid messing with card detection logic.
>
> //
>
> - MmioWrite32 (MMCHS_INT_STAT, ALL_EN & ~(CARD_INS));
>
> + SdMmioWrite32 (MMCHS_INT_STAT, ALL_EN & ~(CARD_INS));
>
>
>
> // Set command argument register
>
> - MmioWrite32 (MMCHS_ARG, Argument);
>
> + SdMmioWrite32 (MMCHS_ARG, Argument);
>
>
>
> // Send the command
>
> - MmioWrite32 (MMCHS_CMD, MmcCmd);
>
> + SdMmioWrite32 (MMCHS_CMD, MmcCmd);
>
>
>
> // Check for the command status.
>
> while (RetryCount < MAX_RETRY_COUNT) {
>
> @@ -373,7 +425,7 @@ MMCSendCommand (
>
>
> // Check if command is completed.
>
> if ((MmcStatus & CC) == CC) {
>
> - MmioWrite32 (MMCHS_INT_STAT, CC);
>
> + SdMmioWrite32 (MMCHS_INT_STAT, CC);
>
> break;
>
> }
>
>
>
> @@ -428,6 +480,21 @@ MMCNotifyState (
> return Status;
>
> }
>
>
>
> + DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: CAP %X CAPH %X\n", MmioRead32(MMCHS_CAPA),MmioRead32(MMCHS_CUR_CAPA)));
>
> +
>
> + // Lets switch to card detect test mode.
>
> + SdMmioOr32 (MMCHS_HCTL, BIT7|BIT6);
>
> +
>
> + // set card voltage
>
> + SdMmioAnd32 (MMCHS_HCTL, ~SDBP_ON);
>
> + SdMmioAndThenOr32 (MMCHS_HCTL, (UINT32) ~SDBP_MASK, SDVS_3_3_V);
>
> + SdMmioOr32 (MMCHS_HCTL, SDBP_ON);
>
> +
>
> + DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: AC12 %X HCTL %X\n", MmioRead32(MMCHS_AC12),MmioRead32(MMCHS_HCTL)));
>
> +
>
> + // First turn off the clock
>
> + SdMmioAnd32 (MMCHS_SYSCTL, ~CEN);
>
> +
>
> // Attempt to set the clock to 400Khz which is the expected initialization speed
>
> Status = CalculateClockFrequencyDivisor (400000, &Divisor, NULL);
>
> if (EFI_ERROR (Status)) {
>
> @@ -436,10 +503,15 @@ MMCNotifyState (
> }
>
>
>
> // Set Data Timeout Counter value, set clock frequency, enable internal clock
>
> - MmioOr32 (MMCHS_SYSCTL, DTO_VAL | Divisor | CEN | ICS | ICE);
>
> + SdMmioOr32 (MMCHS_SYSCTL, DTO_VAL | Divisor | CEN | ICS | ICE);
>
> + SdMmioOr32 (MMCHS_HCTL, SDBP_ON);
>
> + // wait for ICS
>
> + while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);
>
> +
>
> + DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: AC12 %X HCTL %X\n", MmioRead32(MMCHS_AC12),MmioRead32(MMCHS_HCTL)));
>
>
>
> // Enable interrupts
>
> - MmioWrite32 (MMCHS_IE, ALL_EN);
>
> + SdMmioWrite32 (MMCHS_IE, ALL_EN);
>
> }
>
> break;
>
> case MmcIdleState:
>
> @@ -452,7 +524,7 @@ MMCNotifyState (
> ClockFrequency = 25000000;
>
>
>
> // First turn off the clock
>
> - MmioAnd32 (MMCHS_SYSCTL, ~CEN);
>
> + SdMmioAnd32 (MMCHS_SYSCTL, ~CEN);
>
>
>
> Status = CalculateClockFrequencyDivisor (ClockFrequency, &Divisor, NULL);
>
> if (EFI_ERROR (Status)) {
>
> @@ -462,13 +534,13 @@ MMCNotifyState (
> }
>
>
>
> // Setup new divisor
>
> - MmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~CLKD_MASK, Divisor);
>
> + SdMmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~CLKD_MASK, Divisor);
>
>
>
> // Wait for the clock to stabilise
>
> while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);
>
>
>
> // Set Data Timeout Counter value, set clock frequency, enable internal clock
>
> - MmioOr32 (MMCHS_SYSCTL, CEN);
>
> + SdMmioOr32 (MMCHS_SYSCTL, CEN);
>
> break;
>
> case MmcTransferState:
>
> break;
>
> @@ -635,7 +707,7 @@ MMCReadBlockData (
> while (RetryCount < MAX_RETRY_COUNT) {
>
> MmcStatus = MmioRead32 (MMCHS_INT_STAT);
>
> if ((MmcStatus & BRR) != 0) {
>
> - MmioWrite32 (MMCHS_INT_STAT, BRR);
>
> + SdMmioWrite32 (MMCHS_INT_STAT, BRR);
>
> /*
>
> * Data is ready.
>
> */
>
> @@ -662,7 +734,7 @@ MMCReadBlockData (
> gBS->Stall (STALL_AFTER_READ_US);
>
> }
>
>
>
> - MmioWrite32 (MMCHS_INT_STAT, BRR);
>
> + SdMmioWrite32 (MMCHS_INT_STAT, BRR);
>
> return EFI_SUCCESS;
>
> }
>
>
>
> @@ -699,13 +771,13 @@ MMCWriteBlockData (
> while (RetryCount < MAX_RETRY_COUNT) {
>
> MmcStatus = MmioRead32 (MMCHS_INT_STAT);
>
> if ((MmcStatus & BWR) != 0) {
>
> - MmioWrite32 (MMCHS_INT_STAT, BWR);
>
> + SdMmioWrite32 (MMCHS_INT_STAT, BWR);
>
> /*
>
> * Can write data.
>
> */
>
> mFwProtocol->SetLed (TRUE);
>
> for (Count = 0; Count < BlockLen; Count += 4, Buffer++) {
>
> - MmioWrite32 (MMCHS_DATA, *Buffer);
>
> + SdMmioWrite32 (MMCHS_DATA, *Buffer);
>
> }
>
>
>
> mFwProtocol->SetLed (FALSE);
>
> @@ -726,7 +798,7 @@ MMCWriteBlockData (
> gBS->Stall (STALL_AFTER_WRITE_US);
>
> }
>
>
>
> - MmioWrite32 (MMCHS_INT_STAT, BWR);
>
> + SdMmioWrite32 (MMCHS_INT_STAT, BWR);
>
> return EFI_SUCCESS;
>
> }
>
>
>
> diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
> index 6cd600f738..e94606cc5b 100644
> --- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
> +++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
> @@ -37,6 +37,7 @@
> #define STALL_AFTER_REC_RESP_US (50)
>
> #define STALL_AFTER_WRITE_US (200)
>
> #define STALL_AFTER_READ_US (20)
>
> +#define STALL_AFTER_REG_WRITE_US (10)
>
> #define STALL_AFTER_RETRY_US (20)
>
>
>
> #define MAX_DIVISOR_VALUE 1023
>
> --
> 2.13.7
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#68816): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68816&data=04%7C01%7Cawarkentin%40vmware.com%7C121bf8f78f3b437be80708d8a0875a08%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850504293478%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=6UBUDOHEs8MHLhK7%2B9DkL4NAdxzwttiJRvE88aqD%2BHw%3D&reserved=0
> Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964893%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7C121bf8f78f3b437be80708d8a0875a08%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850504293478%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=OVqu67c28Qqnk25HasY%2BxkEC0KgOBQfxZWJxGZ0nJlk%3D&reserved=0
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7C121bf8f78f3b437be80708d8a0875a08%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850504293478%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=aXFzE1B1xX6JQeXymAEmWa2Z99welypR6HTHXrv1%2B7E%3D&reserved=0 [awarkentin@vmware.com]
> -=-=-=-=-=-=
>
>
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 4/7] Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config
2020-12-15 18:46 ` Jeremy Linton
@ 2020-12-15 18:52 ` Andrei Warkentin
0 siblings, 0 replies; 20+ messages in thread
From: Andrei Warkentin @ 2020-12-15 18:52 UTC (permalink / raw)
To: Jeremy Linton, devel@edk2.groups.io
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
[-- Attachment #1: Type: text/plain, Size: 13428 bytes --]
Yep, all understood and acknowledged. No actionable items - lgtm.
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
---
Отправлено из Workspace ONE Boxer<https://whatisworkspaceone.com/boxer>
15 декабря 2020 г. в 12:46:24 PM GMT-6 Jeremy Linton <jeremy.linton@arm.com> пишет:
Hi,
On 12/15/20 12:26 PM, Andrei Warkentin wrote:
> I believe that applies only to the Arasan integration, not MMC2.
>
> I'm trying to recollect why I thought this didn't matter (or how it was getting mitigated), but i'm drawing a blank. I'm okay doing it.
Well, I think it "works" without it, although it appears both uboot and
linux have similar workarounds for both controllers. So "works" might be
a case of works for me but not for you. That is a large part of the
problem around using PNP0D40 as the _CID too. It works for both
controllers, despite the lack of careful alignment controls, or this
workaround in linux with the straight sdhci_acpi driver. If I can figure
out how to suppress/quirk the cmd12 warnings the emmc2 it would almost
be worth doing.
A good part of this set is just based on me banging my head and
inserting trace/prints in the linux and uboot gpio/mailbox and mmc
paths, and then supporting the most obvious differences. So while I
backed a few things out, some of these things remain (like this) because
there is a bit of documentation in those drivers claiming there is a
clock domain crossing bug. What the actual details, or how to reproduce
aren't included.
>
> Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
> ________________________________
> From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
> Sent: Monday, December 14, 2020 5:23 PM
> To: devel@edk2.groups.io <devel@edk2.groups.io>
> Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
> Subject: [edk2-devel] [PATCH 4/7] Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config
>
> The uboot and linux drivers have notes that there is a clock domain crossing
> problem that happens with back to back writes to the sd controllers on the
> rpi. Its not clear if this is still applicable to the rpi4/emmc2 but
> it seems wise to add it.
>
> Futher, we need to assure that the card voltage is set to 3.3V, and
> we should try and follow some of the SDHCI docs when it comes to
> changing the clock.
>
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
> .../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c | 112 +++++++++++++++++----
> .../Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h | 1 +
> 2 files changed, 93 insertions(+), 20 deletions(-)
>
> diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
> index 0cb7e85b38..a7b538a91a 100644
> --- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
> +++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
> @@ -18,6 +18,56 @@ UINT32 LastExecutedCommand = (UINT32) -1;
> STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
>
> STATIC UINTN MMCHS_BASE;
>
>
>
> +STATIC
>
> +UINT32
>
> +EFIAPI
>
> +SdMmioWrite32 (
>
> + IN UINTN Address,
>
> + IN UINT32 Value
>
> + )
>
> +{
>
> + UINT32 ret;
>
> + ret = (UINT32)MmioWrite32 (Address, Value);
>
> + // There is a bug about clock domain crossing on writes, delay to avoid it
>
> + gBS->Stall (STALL_AFTER_REG_WRITE_US);
>
> + return ret;
>
> +}
>
> +
>
> +STATIC
>
> +UINT32
>
> +EFIAPI
>
> +SdMmioOr32 (
>
> + IN UINTN Address,
>
> + IN UINT32 OrData
>
> + )
>
> +{
>
> + return SdMmioWrite32 (Address, MmioRead32 (Address) | OrData);
>
> +}
>
> +
>
> +STATIC
>
> +UINT32
>
> +EFIAPI
>
> +SdMmioAnd32 (
>
> + IN UINTN Address,
>
> + IN UINT32 AndData
>
> + )
>
> +{
>
> + return SdMmioWrite32 (Address, MmioRead32 (Address) & AndData);
>
> +}
>
> +
>
> +STATIC
>
> +UINT32
>
> +EFIAPI
>
> +SdMmioAndThenOr32 (
>
> + IN UINTN Address,
>
> + IN UINT32 AndData,
>
> + IN UINT32 OrData
>
> + )
>
> +{
>
> + return SdMmioWrite32 (Address, (MmioRead32 (Address) & AndData) | OrData);
>
> +}
>
> +
>
> +
>
> /**
>
> These SD commands are optional, according to the SD Spec
>
> **/
>
> @@ -175,7 +225,9 @@ SoftReset (
> IN UINT32 Mask
>
> )
>
> {
>
> - MmioOr32 (MMCHS_SYSCTL, Mask);
>
> + DEBUG ((DEBUG_MMCHOST_SD, "SoftReset with mask 0x%x\n", Mask));
>
> +
>
> + SdMmioOr32 (MMCHS_SYSCTL, Mask);
>
> if (PollRegisterWithMask (MMCHS_SYSCTL, Mask, 0) == EFI_TIMEOUT) {
>
> DEBUG ((DEBUG_ERROR, "Failed to SoftReset with mask 0x%x\n", Mask));
>
> return EFI_TIMEOUT;
>
> @@ -326,29 +378,29 @@ MMCSendCommand (
> }
>
>
>
> if (IsAppCmd && MmcCmd == ACMD22) {
>
> - MmioWrite32 (MMCHS_BLK, 4);
>
> + SdMmioWrite32 (MMCHS_BLK, 4);
>
> } else if (IsAppCmd && MmcCmd == ACMD51) {
>
> - MmioWrite32 (MMCHS_BLK, 8);
>
> + SdMmioWrite32 (MMCHS_BLK, 8);
>
> } else if (!IsAppCmd && MmcCmd == CMD6) {
>
> - MmioWrite32 (MMCHS_BLK, 64);
>
> + SdMmioWrite32 (MMCHS_BLK, 64);
>
> } else if (IsADTCCmd) {
>
> - MmioWrite32 (MMCHS_BLK, BLEN_512BYTES);
>
> + SdMmioWrite32 (MMCHS_BLK, BLEN_512BYTES);
>
> }
>
>
>
> // Set Data timeout counter value to max value.
>
> - MmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~DTO_MASK, DTO_VAL);
>
> + SdMmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~DTO_MASK, DTO_VAL);
>
>
>
> //
>
> // Clear Interrupt Status Register, but not the Card Inserted bit
>
> // to avoid messing with card detection logic.
>
> //
>
> - MmioWrite32 (MMCHS_INT_STAT, ALL_EN & ~(CARD_INS));
>
> + SdMmioWrite32 (MMCHS_INT_STAT, ALL_EN & ~(CARD_INS));
>
>
>
> // Set command argument register
>
> - MmioWrite32 (MMCHS_ARG, Argument);
>
> + SdMmioWrite32 (MMCHS_ARG, Argument);
>
>
>
> // Send the command
>
> - MmioWrite32 (MMCHS_CMD, MmcCmd);
>
> + SdMmioWrite32 (MMCHS_CMD, MmcCmd);
>
>
>
> // Check for the command status.
>
> while (RetryCount < MAX_RETRY_COUNT) {
>
> @@ -373,7 +425,7 @@ MMCSendCommand (
>
>
> // Check if command is completed.
>
> if ((MmcStatus & CC) == CC) {
>
> - MmioWrite32 (MMCHS_INT_STAT, CC);
>
> + SdMmioWrite32 (MMCHS_INT_STAT, CC);
>
> break;
>
> }
>
>
>
> @@ -428,6 +480,21 @@ MMCNotifyState (
> return Status;
>
> }
>
>
>
> + DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: CAP %X CAPH %X\n", MmioRead32(MMCHS_CAPA),MmioRead32(MMCHS_CUR_CAPA)));
>
> +
>
> + // Lets switch to card detect test mode.
>
> + SdMmioOr32 (MMCHS_HCTL, BIT7|BIT6);
>
> +
>
> + // set card voltage
>
> + SdMmioAnd32 (MMCHS_HCTL, ~SDBP_ON);
>
> + SdMmioAndThenOr32 (MMCHS_HCTL, (UINT32) ~SDBP_MASK, SDVS_3_3_V);
>
> + SdMmioOr32 (MMCHS_HCTL, SDBP_ON);
>
> +
>
> + DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: AC12 %X HCTL %X\n", MmioRead32(MMCHS_AC12),MmioRead32(MMCHS_HCTL)));
>
> +
>
> + // First turn off the clock
>
> + SdMmioAnd32 (MMCHS_SYSCTL, ~CEN);
>
> +
>
> // Attempt to set the clock to 400Khz which is the expected initialization speed
>
> Status = CalculateClockFrequencyDivisor (400000, &Divisor, NULL);
>
> if (EFI_ERROR (Status)) {
>
> @@ -436,10 +503,15 @@ MMCNotifyState (
> }
>
>
>
> // Set Data Timeout Counter value, set clock frequency, enable internal clock
>
> - MmioOr32 (MMCHS_SYSCTL, DTO_VAL | Divisor | CEN | ICS | ICE);
>
> + SdMmioOr32 (MMCHS_SYSCTL, DTO_VAL | Divisor | CEN | ICS | ICE);
>
> + SdMmioOr32 (MMCHS_HCTL, SDBP_ON);
>
> + // wait for ICS
>
> + while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);
>
> +
>
> + DEBUG ((DEBUG_MMCHOST_SD, "ArasanMMCHost: AC12 %X HCTL %X\n", MmioRead32(MMCHS_AC12),MmioRead32(MMCHS_HCTL)));
>
>
>
> // Enable interrupts
>
> - MmioWrite32 (MMCHS_IE, ALL_EN);
>
> + SdMmioWrite32 (MMCHS_IE, ALL_EN);
>
> }
>
> break;
>
> case MmcIdleState:
>
> @@ -452,7 +524,7 @@ MMCNotifyState (
> ClockFrequency = 25000000;
>
>
>
> // First turn off the clock
>
> - MmioAnd32 (MMCHS_SYSCTL, ~CEN);
>
> + SdMmioAnd32 (MMCHS_SYSCTL, ~CEN);
>
>
>
> Status = CalculateClockFrequencyDivisor (ClockFrequency, &Divisor, NULL);
>
> if (EFI_ERROR (Status)) {
>
> @@ -462,13 +534,13 @@ MMCNotifyState (
> }
>
>
>
> // Setup new divisor
>
> - MmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~CLKD_MASK, Divisor);
>
> + SdMmioAndThenOr32 (MMCHS_SYSCTL, (UINT32) ~CLKD_MASK, Divisor);
>
>
>
> // Wait for the clock to stabilise
>
> while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);
>
>
>
> // Set Data Timeout Counter value, set clock frequency, enable internal clock
>
> - MmioOr32 (MMCHS_SYSCTL, CEN);
>
> + SdMmioOr32 (MMCHS_SYSCTL, CEN);
>
> break;
>
> case MmcTransferState:
>
> break;
>
> @@ -635,7 +707,7 @@ MMCReadBlockData (
> while (RetryCount < MAX_RETRY_COUNT) {
>
> MmcStatus = MmioRead32 (MMCHS_INT_STAT);
>
> if ((MmcStatus & BRR) != 0) {
>
> - MmioWrite32 (MMCHS_INT_STAT, BRR);
>
> + SdMmioWrite32 (MMCHS_INT_STAT, BRR);
>
> /*
>
> * Data is ready.
>
> */
>
> @@ -662,7 +734,7 @@ MMCReadBlockData (
> gBS->Stall (STALL_AFTER_READ_US);
>
> }
>
>
>
> - MmioWrite32 (MMCHS_INT_STAT, BRR);
>
> + SdMmioWrite32 (MMCHS_INT_STAT, BRR);
>
> return EFI_SUCCESS;
>
> }
>
>
>
> @@ -699,13 +771,13 @@ MMCWriteBlockData (
> while (RetryCount < MAX_RETRY_COUNT) {
>
> MmcStatus = MmioRead32 (MMCHS_INT_STAT);
>
> if ((MmcStatus & BWR) != 0) {
>
> - MmioWrite32 (MMCHS_INT_STAT, BWR);
>
> + SdMmioWrite32 (MMCHS_INT_STAT, BWR);
>
> /*
>
> * Can write data.
>
> */
>
> mFwProtocol->SetLed (TRUE);
>
> for (Count = 0; Count < BlockLen; Count += 4, Buffer++) {
>
> - MmioWrite32 (MMCHS_DATA, *Buffer);
>
> + SdMmioWrite32 (MMCHS_DATA, *Buffer);
>
> }
>
>
>
> mFwProtocol->SetLed (FALSE);
>
> @@ -726,7 +798,7 @@ MMCWriteBlockData (
> gBS->Stall (STALL_AFTER_WRITE_US);
>
> }
>
>
>
> - MmioWrite32 (MMCHS_INT_STAT, BWR);
>
> + SdMmioWrite32 (MMCHS_INT_STAT, BWR);
>
> return EFI_SUCCESS;
>
> }
>
>
>
> diff --git a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
> index 6cd600f738..e94606cc5b 100644
> --- a/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
> +++ b/Platform/RaspberryPi/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
> @@ -37,6 +37,7 @@
> #define STALL_AFTER_REC_RESP_US (50)
>
> #define STALL_AFTER_WRITE_US (200)
>
> #define STALL_AFTER_READ_US (20)
>
> +#define STALL_AFTER_REG_WRITE_US (10)
>
> #define STALL_AFTER_RETRY_US (20)
>
>
>
> #define MAX_DIVISOR_VALUE 1023
>
> --
> 2.13.7
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#68816): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68816&data=04%7C01%7Cawarkentin%40vmware.com%7Cc2bc5f44461c484196e008d8a129b6e2%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436547836525703%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=tUEGHmsaEG%2B0dy6qn0GgCAK97aZTtnKXntkcSft%2BH14%3D&reserved=0
> Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964893%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7Cc2bc5f44461c484196e008d8a129b6e2%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436547836525703%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=8vOe%2BmdxokTuXKlAqSNuZWXFWDgGLA%2FFD24Ao1J6Qws%3D&reserved=0
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7Cc2bc5f44461c484196e008d8a129b6e2%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436547836525703%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=zBnexfVSW9erLRPOWZCJIT%2FqLnF%2Bw95A4snliXN8HHg%3D&reserved=0 [awarkentin@vmware.com]
> -=-=-=-=-=-=
>
>
>
[-- Attachment #2: Type: text/html, Size: 31360 bytes --]
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
2020-12-15 18:21 ` [edk2-devel] " Andrei Warkentin
@ 2020-12-15 18:55 ` Jeremy Linton
2020-12-15 19:36 ` Andrei Warkentin
0 siblings, 1 reply; 20+ messages in thread
From: Jeremy Linton @ 2020-12-15 18:55 UTC (permalink / raw)
To: Andrei Warkentin, devel@edk2.groups.io
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
Hi,
On 12/15/20 12:21 PM, Andrei Warkentin wrote:
> Could we rework some of these magic constants? Esp the SetPowerState ones.
Yes, I know from the mailbox description what the 1,1 do (on with
wait?). But its clear as mud what the channel "0" really means. It seems
to have varying definitions, from "power everything" to "power sd". So
it may depend on model, but again, ugh, uboot is doing it.
>
> Do we need both EMMC and EMMC2 clocks enabled all the time?
I think so, not so much for edk2, but for the resulting OS. At least
until we get AML to power on/enable them.
Which is sorta a todo at this point for the platform, we really should
be supporting the ACPI power states and forwarding that info via mailbox
commands.
> > A
> ________________________________
> From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
> Sent: Monday, December 14, 2020 5:23 PM
> To: devel@edk2.groups.io <devel@edk2.groups.io>
> Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
> Subject: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
>
> It seems we should be powering up the sd cards, and possibly
> the clocks as well to assure they are setup properly before
> we attempt to access the controller.
>
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
> Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> index 28f57438c5..8829740938 100644
> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> @@ -552,6 +552,15 @@ ApplyVariables (
> GpioPinFuncSet (37, GPIO_FSEL_ALT3);
>
> GpioPinFuncSet (38, GPIO_FSEL_ALT3);
>
> GpioPinFuncSet (39, GPIO_FSEL_ALT3);
>
> +
>
> + /*
>
> + * power and clock everything by default
>
> + */
>
> + Status = mFwProtocol->SetPowerState (0, 1, 1); //SD on
>
> + Status = mFwProtocol->SetGpioConfig (RPI_EXP_GPIO_SD_VOLT,
>
> + RPI_EXP_GPIO_DIR_OUT, 1); //3.3v
>
> + Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC2, 1);
>
> + Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC, 1);
>
> }
>
> } else {
>
> DEBUG ((DEBUG_ERROR, "Model Family %d not supported...\n", mModelFamily));
>
> --
> 2.13.7
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#68818): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68818&data=04%7C01%7Cawarkentin%40vmware.com%7C09a7a2483d704affef4e08d8a0875810%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850454110853%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=MYuBr4R6LYw8l3pWORpmGzLTyvljJCffHUODVQk%2BjxQ%3D&reserved=0
> Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964895%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7C09a7a2483d704affef4e08d8a0875810%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850454110853%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=MRu43d1ZNnFvGE3K9JJCXIUXvE2bZ6xWUzWtVxkNf7E%3D&reserved=0
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7C09a7a2483d704affef4e08d8a0875810%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637435850454110853%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=5g23ev8pYF4L%2B2rNNABCccLjr1VMPZ1nfbV%2BfUlwqmU%3D&reserved=0 [awarkentin@vmware.com]
> -=-=-=-=-=-=
>
>
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
2020-12-15 18:55 ` Jeremy Linton
@ 2020-12-15 19:36 ` Andrei Warkentin
2020-12-15 20:15 ` Jeremy Linton
0 siblings, 1 reply; 20+ messages in thread
From: Andrei Warkentin @ 2020-12-15 19:36 UTC (permalink / raw)
To: Jeremy Linton, devel@edk2.groups.io
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
[-- Attachment #1: Type: text/plain, Size: 4925 bytes --]
Reviewed-by: Andrey Warkentin <awarkentin@vmware.com>
________________________________
From: Jeremy Linton <jeremy.linton@arm.com>
Sent: Tuesday, December 15, 2020 12:55 PM
To: Andrei Warkentin <awarkentin@vmware.com>; devel@edk2.groups.io <devel@edk2.groups.io>
Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>
Subject: Re: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
Hi,
On 12/15/20 12:21 PM, Andrei Warkentin wrote:
> Could we rework some of these magic constants? Esp the SetPowerState ones.
Yes, I know from the mailbox description what the 1,1 do (on with
wait?). But its clear as mud what the channel "0" really means. It seems
to have varying definitions, from "power everything" to "power sd". So
it may depend on model, but again, ugh, uboot is doing it.
>
> Do we need both EMMC and EMMC2 clocks enabled all the time?
I think so, not so much for edk2, but for the resulting OS. At least
until we get AML to power on/enable them.
Which is sorta a todo at this point for the platform, we really should
be supporting the ACPI power states and forwarding that info via mailbox
commands.
> > A
> ________________________________
> From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
> Sent: Monday, December 14, 2020 5:23 PM
> To: devel@edk2.groups.io <devel@edk2.groups.io>
> Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
> Subject: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
>
> It seems we should be powering up the sd cards, and possibly
> the clocks as well to assure they are setup properly before
> we attempt to access the controller.
>
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
> Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> index 28f57438c5..8829740938 100644
> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> @@ -552,6 +552,15 @@ ApplyVariables (
> GpioPinFuncSet (37, GPIO_FSEL_ALT3);
>
> GpioPinFuncSet (38, GPIO_FSEL_ALT3);
>
> GpioPinFuncSet (39, GPIO_FSEL_ALT3);
>
> +
>
> + /*
>
> + * power and clock everything by default
>
> + */
>
> + Status = mFwProtocol->SetPowerState (0, 1, 1); //SD on
>
> + Status = mFwProtocol->SetGpioConfig (RPI_EXP_GPIO_SD_VOLT,
>
> + RPI_EXP_GPIO_DIR_OUT, 1); //3.3v
>
> + Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC2, 1);
>
> + Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC, 1);
>
> }
>
> } else {
>
> DEBUG ((DEBUG_ERROR, "Model Family %d not supported...\n", mModelFamily));
>
> --
> 2.13.7
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#68818): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68818&data=04%7C01%7Cawarkentin%40vmware.com%7C72669f70d63c494ac71408d8a12b1035%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436553643223033%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=nSIj0mEg742NAcojf0oTDhWds2ZBoIJuQuvdo09sJzM%3D&reserved=0
> Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964895%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7C72669f70d63c494ac71408d8a12b1035%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436553643223033%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=ginptEm%2FCGAaCPtqLlmKqNMGEPWog3RhWBHuTh%2FIWG8%3D&reserved=0
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7C72669f70d63c494ac71408d8a12b1035%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436553643223033%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=NzTgITb5uDBkEggkjmjXgfdp0XpHEhJ8o9g1cPbVDNE%3D&reserved=0 [awarkentin@vmware.com]
> -=-=-=-=-=-=
>
>
>
[-- Attachment #2: Type: text/html, Size: 8383 bytes --]
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
2020-12-15 19:36 ` Andrei Warkentin
@ 2020-12-15 20:15 ` Jeremy Linton
0 siblings, 0 replies; 20+ messages in thread
From: Jeremy Linton @ 2020-12-15 20:15 UTC (permalink / raw)
To: Andrei Warkentin, devel@edk2.groups.io
Cc: ard.biesheuvel@arm.com, leif@nuviainc.com, pete@akeo.ie,
andrey.warkentin@gmail.com, samer.el-haj-mahmoud@arm.com
On 12/15/20 1:36 PM, Andrei Warkentin wrote:
> Reviewed-by: Andrey Warkentin <awarkentin@vmware.com>
Thanks,
To be clear i'm going to repost this one.
> ________________________________
> From: Jeremy Linton <jeremy.linton@arm.com>
> Sent: Tuesday, December 15, 2020 12:55 PM
> To: Andrei Warkentin <awarkentin@vmware.com>; devel@edk2.groups.io <devel@edk2.groups.io>
> Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>
> Subject: Re: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
>
> Hi,
>
> On 12/15/20 12:21 PM, Andrei Warkentin wrote:
>> Could we rework some of these magic constants? Esp the SetPowerState ones.
>
> Yes, I know from the mailbox description what the 1,1 do (on with
> wait?). But its clear as mud what the channel "0" really means. It seems
> to have varying definitions, from "power everything" to "power sd". So
> it may depend on model, but again, ugh, uboot is doing it.
>
>
>>
>> Do we need both EMMC and EMMC2 clocks enabled all the time?
>
> I think so, not so much for edk2, but for the resulting OS. At least
> until we get AML to power on/enable them.
>
> Which is sorta a todo at this point for the platform, we really should
> be supporting the ACPI power states and forwarding that info via mailbox
> commands.
>
>> > A
>> ________________________________
>> From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
>> Sent: Monday, December 14, 2020 5:23 PM
>> To: devel@edk2.groups.io <devel@edk2.groups.io>
>> Cc: ard.biesheuvel@arm.com <ard.biesheuvel@arm.com>; leif@nuviainc.com <leif@nuviainc.com>; pete@akeo.ie <pete@akeo.ie>; andrey.warkentin@gmail.com <andrey.warkentin@gmail.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
>> Subject: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
>>
>> It seems we should be powering up the sd cards, and possibly
>> the clocks as well to assure they are setup properly before
>> we attempt to access the controller.
>>
>> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
>> ---
>> Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 9 +++++++++
>> 1 file changed, 9 insertions(+)
>>
>> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> index 28f57438c5..8829740938 100644
>> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> @@ -552,6 +552,15 @@ ApplyVariables (
>> GpioPinFuncSet (37, GPIO_FSEL_ALT3);
>>
>> GpioPinFuncSet (38, GPIO_FSEL_ALT3);
>>
>> GpioPinFuncSet (39, GPIO_FSEL_ALT3);
>>
>> +
>>
>> + /*
>>
>> + * power and clock everything by default
>>
>> + */
>>
>> + Status = mFwProtocol->SetPowerState (0, 1, 1); //SD on
>>
>> + Status = mFwProtocol->SetGpioConfig (RPI_EXP_GPIO_SD_VOLT,
>>
>> + RPI_EXP_GPIO_DIR_OUT, 1); //3.3v
>>
>> + Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC2, 1);
>>
>> + Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC, 1);
>>
>> }
>>
>> } else {
>>
>> DEBUG ((DEBUG_ERROR, "Model Family %d not supported...\n", mModelFamily));
>>
>> --
>> 2.13.7
>>
>>
>>
>> -=-=-=-=-=-=
>> Groups.io Links: You receive all messages sent to this group.
>> View/Reply Online (#68818): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68818&data=04%7C01%7Cawarkentin%40vmware.com%7C72669f70d63c494ac71408d8a12b1035%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436553643223033%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=nSIj0mEg742NAcojf0oTDhWds2ZBoIJuQuvdo09sJzM%3D&reserved=0
>> Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964895%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7C72669f70d63c494ac71408d8a12b1035%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436553643223033%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=ginptEm%2FCGAaCPtqLlmKqNMGEPWog3RhWBHuTh%2FIWG8%3D&reserved=0
>> Group Owner: devel+owner@edk2.groups.io
>> Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7C72669f70d63c494ac71408d8a12b1035%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436553643223033%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=NzTgITb5uDBkEggkjmjXgfdp0XpHEhJ8o9g1cPbVDNE%3D&reserved=0 [awarkentin@vmware.com]
>> -=-=-=-=-=-=
>>
>>
>>
>
>
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2020-12-15 20:15 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-12-14 23:23 [PATCH 0/7] Enable emmc2 controller rpi4 Jeremy Linton
2020-12-14 23:23 ` [PATCH 1/7] Platform/RaspberryPi: Update VPU mailbox constants Jeremy Linton
2020-12-15 18:15 ` [edk2-devel] " Andrei Warkentin
2020-12-14 23:23 ` [PATCH 2/7] Platform/RaspberryPi: Add further mailbox helpers Jeremy Linton
2020-12-15 18:18 ` [edk2-devel] " Andrei Warkentin
2020-12-14 23:23 ` [PATCH 3/7] Platform/RaspberryPi: Split MMC register defintions Jeremy Linton
2020-12-15 18:17 ` [edk2-devel] " Andrei Warkentin
2020-12-14 23:23 ` [PATCH 4/7] Platform/RaspberryPi/Arasan: Add write delay and voltage/clock config Jeremy Linton
2020-12-15 18:26 ` [edk2-devel] " Andrei Warkentin
2020-12-15 18:46 ` Jeremy Linton
2020-12-15 18:52 ` Andrei Warkentin
2020-12-14 23:23 ` [PATCH 5/7] Platform/RaspberryPi/Arasan: Select the correct base frequency Jeremy Linton
2020-12-15 18:18 ` [edk2-devel] " Andrei Warkentin
2020-12-14 23:23 ` [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs Jeremy Linton
2020-12-15 18:21 ` [edk2-devel] " Andrei Warkentin
2020-12-15 18:55 ` Jeremy Linton
2020-12-15 19:36 ` Andrei Warkentin
2020-12-15 20:15 ` Jeremy Linton
2020-12-14 23:23 ` [PATCH 7/7] Platform/RaspberryPi: Correct device path removal Jeremy Linton
2020-12-15 18:19 ` [edk2-devel] " Andrei Warkentin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox