[PATCH 31/40] TigerlakeSiliconPkg/Library: Add package common library instances

["Heng Luo" <heng.luo@intel.com>]

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3171

Adds the following files:
  * Library/BasePciSegmentMultiSegLibPci
  * Library/BaseSiConfigBlockLib
  * Library/PeiDxeSmmMmPciLib

Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
---
 Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/BasePciSegmentMultiSegLibPci.inf |   38 +++++++++++++++++++++++++++
 Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/BasePciSegmentMultiSegLibPci.uni |   14 ++++++++++
 Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/PciSegmentLib.c                  | 1280 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 Silicon/Intel/TigerlakeSiliconPkg/Library/BaseSiConfigBlockLib/BaseSiConfigBlockLib.c                   |   86 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 Silicon/Intel/TigerlakeSiliconPkg/Library/BaseSiConfigBlockLib/BaseSiConfigBlockLib.inf                 |   33 +++++++++++++++++++++++
 Silicon/Intel/TigerlakeSiliconPkg/Library/PeiDxeSmmMmPciLib/PeiDxeSmmMmPciLib.c                         |   35 +++++++++++++++++++++++++
 Silicon/Intel/TigerlakeSiliconPkg/Library/PeiDxeSmmMmPciLib/PeiDxeSmmMmPciLib.inf                       |   43 ++++++++++++++++++++++++++++++
 7 files changed, 1529 insertions(+)

diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/BasePciSegmentMultiSegLibPci.inf b/Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/BasePciSegmentMultiSegLibPci.inf
new file mode 100644
index 0000000000..b04bce9cf0
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/BasePciSegmentMultiSegLibPci.inf
@@ -0,0 +1,38 @@
+## @file
+# Instance of PCI Segment Library based on PCI Library.
+#
+# PCI Segment Library that layers on top of the PCI Library which only
+#  supports segment 0 and segment 1 PCI configuration access.
+#
+#  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#  SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+  INF_VERSION                    = 0x00010005
+  BASE_NAME                      = BasePciSegmentMultiSegLibPci
+  MODULE_UNI_FILE                = BasePciSegmentMultiSegLibPci.uni
+  FILE_GUID                      = AC65B409-DF03-466e-8D2B-6FCE1079F0B2
+  MODULE_TYPE                    = BASE
+  VERSION_STRING                 = 1.0
+  LIBRARY_CLASS                  = PciSegmentLib
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+#  VALID_ARCHITECTURES           = IA32 X64 IPF EBC
+#
+
+[Sources]
+  PciSegmentLib.c
+
+[Packages]
+  MdePkg/MdePkg.dec
+  TigerlakeSiliconPkg/SiPkg.dec
+
+[LibraryClasses]
+  BaseLib
+  PciLib
+  DebugLib
+  PcdLib
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/BasePciSegmentMultiSegLibPci.uni b/Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/BasePciSegmentMultiSegLibPci.uni
new file mode 100644
index 0000000000..09bd0f5cfc
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/BasePciSegmentMultiSegLibPci.uni
@@ -0,0 +1,14 @@
+/** @file
+  Instance of PCI Segment Library based on PCI Library.
+
+  PCI Segment Library that layers on top of the PCI Library which only
+   supports segment 0 and segment 1 PCI configuration access.
+
+  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+
+#string STR_MODULE_ABSTRACT             #language en-US "Instance of PCI Segment Library based on PCI Library."
+
+#string STR_MODULE_DESCRIPTION          #language en-US "PCI Segment Library that layers on top of the PCI Library which only supports segment 0 and segment 1 PCI configuration access."
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/PciSegmentLib.c b/Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/PciSegmentLib.c
new file mode 100644
index 0000000000..0d0c64be3f
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Library/BasePciSegmentMultiSegLibPci/PciSegmentLib.c
@@ -0,0 +1,1280 @@
+/** @file
+  PCI Segment Library that layers on top of the PCI Library which only
+   supports segment 0 and segment 1 PCI configuration access.
+
+  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Base.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/PciLib.h>
+#include <Library/PciSegmentLib.h>
+
+/**
+  Assert the validity of a PCI Segment address.
+  A valid PCI Segment address should not contain 1's in bits 28..31 and 33..63
+  and the segment should be 0 or 1.
+
+  @param  A The address to validate.
+  @param  M Additional bits to assert to be zero.
+
+**/
+#define ASSERT_INVALID_PCI_SEGMENT_ADDRESS(A,M) \
+  ASSERT (((A) & (0xfffffffef0000000ULL | (M))) == 0)
+
+/**
+  Convert the PCI Segment library address to PCI library address.
+  From ICL generation support the multiple segment, and the segment number start from BIT28,
+  So we convert the Segment Number offset from BIT32 to BIT28
+
+  @param A The address to convert.
+**/
+#define PCI_SEGMENT_TO_PCI_ADDRESS(A) ((UINTN) (UINT32) ((A) | ((RShiftU64 ((A) & BIT32, 4)))))
+
+/**
+  Register a PCI device so PCI configuration registers may be accessed after
+  SetVirtualAddressMap().
+
+  If any reserved bits in Address are set, then ASSERT().
+
+  @param  Address The address that encodes the PCI Bus, Device, Function and
+                  Register.
+
+  @retval RETURN_SUCCESS           The PCI device was registered for runtime access.
+  @retval RETURN_UNSUPPORTED       An attempt was made to call this function
+                                   after ExitBootServices().
+  @retval RETURN_UNSUPPORTED       The resources required to access the PCI device
+                                   at runtime could not be mapped.
+  @retval RETURN_OUT_OF_RESOURCES  There are not enough resources available to
+                                   complete the registration.
+
+**/
+RETURN_STATUS
+EFIAPI
+PciSegmentRegisterForRuntimeAccess (
+  IN UINTN  Address
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+  return PciRegisterForRuntimeAccess (PCI_SEGMENT_TO_PCI_ADDRESS (Address));
+}
+
+/**
+  Reads an 8-bit PCI configuration register.
+
+  Reads and returns the 8-bit PCI configuration register specified by Address.
+  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+
+  @return The 8-bit PCI configuration register specified by Address.
+
+**/
+UINT8
+EFIAPI
+PciSegmentRead8 (
+  IN UINT64                    Address
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+  return PciRead8 (PCI_SEGMENT_TO_PCI_ADDRESS (Address));
+}
+
+/**
+  Writes an 8-bit PCI configuration register.
+
+  Writes the 8-bit PCI configuration register specified by Address with the value specified by Value.
+  Value is returned.  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+
+  @param  Address     The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  Value       The value to write.
+
+  @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentWrite8 (
+  IN UINT64                    Address,
+  IN UINT8                     Value
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+  return PciWrite8 (PCI_SEGMENT_TO_PCI_ADDRESS (Address), Value);
+}
+
+/**
+  Performs a bitwise OR of an 8-bit PCI configuration register with an 8-bit value.
+
+  Reads the 8-bit PCI configuration register specified by Address,
+  performs a bitwise OR between the read result and the value specified by OrData,
+  and writes the result to the 8-bit PCI configuration register specified by Address.
+  The value written to the PCI configuration register is returned.
+  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  OrData    The value to OR with the PCI configuration register.
+
+  @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentOr8 (
+  IN UINT64                    Address,
+  IN UINT8                     OrData
+  )
+{
+  return PciWrite8 (PCI_SEGMENT_TO_PCI_ADDRESS (Address), (UINT8) (PciSegmentRead8 (Address) | OrData));
+}
+
+/**
+  Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value.
+
+  Reads the 8-bit PCI configuration register specified by Address,
+  performs a bitwise AND between the read result and the value specified by AndData,
+  and writes the result to the 8-bit PCI configuration register specified by Address.
+  The value written to the PCI configuration register is returned.
+  This function must guarantee that all PCI read and write operations are serialized.
+  If any reserved bits in Address are set, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  AndData   The value to AND with the PCI configuration register.
+
+  @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentAnd8 (
+  IN UINT64                    Address,
+  IN UINT8                     AndData
+  )
+{
+  return PciSegmentWrite8 (Address, (UINT8) (PciSegmentRead8 (Address) & AndData));
+}
+
+/**
+  Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value,
+  followed a  bitwise OR with another 8-bit value.
+
+  Reads the 8-bit PCI configuration register specified by Address,
+  performs a bitwise AND between the read result and the value specified by AndData,
+  performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+  and writes the result to the 8-bit PCI configuration register specified by Address.
+  The value written to the PCI configuration register is returned.
+  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  AndData    The value to AND with the PCI configuration register.
+  @param  OrData    The value to OR with the PCI configuration register.
+
+  @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentAndThenOr8 (
+  IN UINT64                    Address,
+  IN UINT8                     AndData,
+  IN UINT8                     OrData
+  )
+{
+  return PciSegmentWrite8 (Address, (UINT8) ((PciSegmentRead8 (Address) & AndData) | OrData));
+}
+
+/**
+  Reads a bit field of a PCI configuration register.
+
+  Reads the bit field in an 8-bit PCI configuration register. The bit field is
+  specified by the StartBit and the EndBit. The value of the bit field is
+  returned.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If StartBit is greater than 7, then ASSERT().
+  If EndBit is greater than 7, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to read.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..7.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..7.
+
+  @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldRead8 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit
+  )
+{
+  return BitFieldRead8 (PciSegmentRead8 (Address), StartBit, EndBit);
+}
+
+/**
+  Writes a bit field to a PCI configuration register.
+
+  Writes Value to the bit field of the PCI configuration register. The bit
+  field is specified by the StartBit and the EndBit. All other bits in the
+  destination PCI configuration register are preserved. The new value of the
+  8-bit register is returned.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If StartBit is greater than 7, then ASSERT().
+  If EndBit is greater than 7, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to write.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..7.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..7.
+  @param  Value     The new value of the bit field.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldWrite8 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT8                     Value
+  )
+{
+  return PciSegmentWrite8 (
+           Address,
+           BitFieldWrite8 (PciSegmentRead8 (Address), StartBit, EndBit, Value)
+           );
+}
+
+/**
+  Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
+  writes the result back to the bit field in the 8-bit port.
+
+  Reads the 8-bit PCI configuration register specified by Address, performs a
+  bitwise OR between the read result and the value specified by
+  OrData, and writes the result to the 8-bit PCI configuration register
+  specified by Address. The value written to the PCI configuration register is
+  returned. This function must guarantee that all PCI read and write operations
+  are serialized. Extra left bits in OrData are stripped.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If StartBit is greater than 7, then ASSERT().
+  If EndBit is greater than 7, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to write.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..7.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..7.
+  @param  OrData    The value to OR with the PCI configuration register.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldOr8 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT8                     OrData
+  )
+{
+  return PciSegmentWrite8 (
+           Address,
+           BitFieldOr8 (PciSegmentRead8 (Address), StartBit, EndBit, OrData)
+           );
+}
+
+/**
+  Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
+  AND, and writes the result back to the bit field in the 8-bit register.
+
+  Reads the 8-bit PCI configuration register specified by Address, performs a
+  bitwise AND between the read result and the value specified by AndData, and
+  writes the result to the 8-bit PCI configuration register specified by
+  Address. The value written to the PCI configuration register is returned.
+  This function must guarantee that all PCI read and write operations are
+  serialized. Extra left bits in AndData are stripped.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If StartBit is greater than 7, then ASSERT().
+  If EndBit is greater than 7, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to write.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..7.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..7.
+  @param  AndData   The value to AND with the PCI configuration register.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldAnd8 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT8                     AndData
+  )
+{
+  return PciSegmentWrite8 (
+           Address,
+           BitFieldAnd8 (PciSegmentRead8 (Address), StartBit, EndBit, AndData)
+           );
+}
+
+/**
+  Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
+  bitwise OR, and writes the result back to the bit field in the
+  8-bit port.
+
+  Reads the 8-bit PCI configuration register specified by Address, performs a
+  bitwise AND followed by a bitwise OR between the read result and
+  the value specified by AndData, and writes the result to the 8-bit PCI
+  configuration register specified by Address. The value written to the PCI
+  configuration register is returned. This function must guarantee that all PCI
+  read and write operations are serialized. Extra left bits in both AndData and
+  OrData are stripped.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If StartBit is greater than 7, then ASSERT().
+  If EndBit is greater than 7, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to write.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..7.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..7.
+  @param  AndData   The value to AND with the PCI configuration register.
+  @param  OrData    The value to OR with the result of the AND operation.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldAndThenOr8 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT8                     AndData,
+  IN UINT8                     OrData
+  )
+{
+  return PciSegmentWrite8 (
+           Address,
+           BitFieldAndThenOr8 (PciSegmentRead8 (Address), StartBit, EndBit, AndData, OrData)
+           );
+}
+
+/**
+  Reads a 16-bit PCI configuration register.
+
+  Reads and returns the 16-bit PCI configuration register specified by Address.
+  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+
+  @return The 16-bit PCI configuration register specified by Address.
+
+**/
+UINT16
+EFIAPI
+PciSegmentRead16 (
+  IN UINT64                    Address
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+  return PciRead16 (PCI_SEGMENT_TO_PCI_ADDRESS (Address));
+}
+
+/**
+  Writes a 16-bit PCI configuration register.
+
+  Writes the 16-bit PCI configuration register specified by Address with the value specified by Value.
+  Value is returned.  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+  @param  Address     The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  Value       The value to write.
+
+  @return The parameter of Value.
+
+**/
+UINT16
+EFIAPI
+PciSegmentWrite16 (
+  IN UINT64                    Address,
+  IN UINT16                    Value
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+  return PciWrite16 (PCI_SEGMENT_TO_PCI_ADDRESS (Address), Value);
+}
+
+/**
+  Performs a bitwise OR of a 16-bit PCI configuration register with
+  a 16-bit value.
+
+  Reads the 16-bit PCI configuration register specified by Address, performs a
+  bitwise OR between the read result and the value specified by
+  OrData, and writes the result to the 16-bit PCI configuration register
+  specified by Address. The value written to the PCI configuration register is
+  returned. This function must guarantee that all PCI read and write operations
+  are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+  @param  Address The address that encodes the PCI Segment, Bus, Device, Function and
+                  Register.
+  @param  OrData  The value to OR with the PCI configuration register.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentOr16 (
+  IN UINT64                    Address,
+  IN UINT16                    OrData
+  )
+{
+  return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) | OrData));
+}
+
+/**
+  Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value.
+
+  Reads the 16-bit PCI configuration register specified by Address,
+  performs a bitwise AND between the read result and the value specified by AndData,
+  and writes the result to the 16-bit PCI configuration register specified by Address.
+  The value written to the PCI configuration register is returned.
+  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  AndData   The value to AND with the PCI configuration register.
+
+  @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentAnd16 (
+  IN UINT64                    Address,
+  IN UINT16                    AndData
+  )
+{
+  return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) & AndData));
+}
+
+/**
+  Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value,
+  followed a  bitwise OR with another 16-bit value.
+
+  Reads the 16-bit PCI configuration register specified by Address,
+  performs a bitwise AND between the read result and the value specified by AndData,
+  performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+  and writes the result to the 16-bit PCI configuration register specified by Address.
+  The value written to the PCI configuration register is returned.
+  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  AndData    The value to AND with the PCI configuration register.
+  @param  OrData    The value to OR with the PCI configuration register.
+
+  @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentAndThenOr16 (
+  IN UINT64                    Address,
+  IN UINT16                    AndData,
+  IN UINT16                    OrData
+  )
+{
+  return PciSegmentWrite16 (Address, (UINT16) ((PciSegmentRead16 (Address) & AndData) | OrData));
+}
+
+/**
+  Reads a bit field of a PCI configuration register.
+
+  Reads the bit field in a 16-bit PCI configuration register. The bit field is
+  specified by the StartBit and the EndBit. The value of the bit field is
+  returned.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 16-bit boundary, then ASSERT().
+  If StartBit is greater than 15, then ASSERT().
+  If EndBit is greater than 15, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to read.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..15.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..15.
+
+  @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldRead16 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit
+  )
+{
+  return BitFieldRead16 (PciSegmentRead16 (Address), StartBit, EndBit);
+}
+
+/**
+  Writes a bit field to a PCI configuration register.
+
+  Writes Value to the bit field of the PCI configuration register. The bit
+  field is specified by the StartBit and the EndBit. All other bits in the
+  destination PCI configuration register are preserved. The new value of the
+  16-bit register is returned.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 16-bit boundary, then ASSERT().
+  If StartBit is greater than 15, then ASSERT().
+  If EndBit is greater than 15, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to write.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..15.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..15.
+  @param  Value     The new value of the bit field.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldWrite16 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT16                    Value
+  )
+{
+  return PciSegmentWrite16 (
+           Address,
+           BitFieldWrite16 (PciSegmentRead16 (Address), StartBit, EndBit, Value)
+           );
+}
+
+/**
+  Reads the 16-bit PCI configuration register specified by Address,
+  performs a bitwise OR between the read result and the value specified by OrData,
+  and writes the result to the 16-bit PCI configuration register specified by Address.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 16-bit boundary, then ASSERT().
+  If StartBit is greater than 15, then ASSERT().
+  If EndBit is greater than 15, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to write.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..15.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..15.
+  @param  OrData    The value to OR with the PCI configuration register.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldOr16 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT16                    OrData
+  )
+{
+  return PciSegmentWrite16 (
+           Address,
+           BitFieldOr16 (PciSegmentRead16 (Address), StartBit, EndBit, OrData)
+           );
+}
+
+/**
+  Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR,
+  and writes the result back to the bit field in the 16-bit port.
+
+  Reads the 16-bit PCI configuration register specified by Address,
+  performs a bitwise OR between the read result and the value specified by OrData,
+  and writes the result to the 16-bit PCI configuration register specified by Address.
+  The value written to the PCI configuration register is returned.
+  This function must guarantee that all PCI read and write operations are serialized.
+  Extra left bits in OrData are stripped.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 16-bit boundary, then ASSERT().
+  If StartBit is greater than 7, then ASSERT().
+  If EndBit is greater than 7, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    The ordinal of the least significant bit in a byte is bit 0.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    The ordinal of the most significant bit in a byte is bit 7.
+  @param  AndData   The value to AND with the read value from the PCI configuration register.
+
+  @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldAnd16 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT16                    AndData
+  )
+{
+  return PciSegmentWrite16 (
+           Address,
+           BitFieldAnd16 (PciSegmentRead16 (Address), StartBit, EndBit, AndData)
+           );
+}
+
+/**
+  Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
+  bitwise OR, and writes the result back to the bit field in the
+  16-bit port.
+
+  Reads the 16-bit PCI configuration register specified by Address, performs a
+  bitwise AND followed by a bitwise OR between the read result and
+  the value specified by AndData, and writes the result to the 16-bit PCI
+  configuration register specified by Address. The value written to the PCI
+  configuration register is returned. This function must guarantee that all PCI
+  read and write operations are serialized. Extra left bits in both AndData and
+  OrData are stripped.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If StartBit is greater than 15, then ASSERT().
+  If EndBit is greater than 15, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to write.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..15.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..15.
+  @param  AndData   The value to AND with the PCI configuration register.
+  @param  OrData    The value to OR with the result of the AND operation.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldAndThenOr16 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT16                    AndData,
+  IN UINT16                    OrData
+  )
+{
+  return PciSegmentWrite16 (
+           Address,
+           BitFieldAndThenOr16 (PciSegmentRead16 (Address), StartBit, EndBit, AndData, OrData)
+           );
+}
+
+/**
+  Reads a 32-bit PCI configuration register.
+
+  Reads and returns the 32-bit PCI configuration register specified by Address.
+  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+
+  @return The 32-bit PCI configuration register specified by Address.
+
+**/
+UINT32
+EFIAPI
+PciSegmentRead32 (
+  IN UINT64                    Address
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+  return PciRead32 (PCI_SEGMENT_TO_PCI_ADDRESS (Address));
+}
+
+/**
+  Writes a 32-bit PCI configuration register.
+
+  Writes the 32-bit PCI configuration register specified by Address with the value specified by Value.
+  Value is returned.  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+  @param  Address     The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  Value       The value to write.
+
+  @return The parameter of Value.
+
+**/
+UINT32
+EFIAPI
+PciSegmentWrite32 (
+  IN UINT64                    Address,
+  IN UINT32                    Value
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+  return PciWrite32 (PCI_SEGMENT_TO_PCI_ADDRESS (Address), Value);
+}
+
+/**
+  Performs a bitwise OR of a 32-bit PCI configuration register with a 32-bit value.
+
+  Reads the 32-bit PCI configuration register specified by Address,
+  performs a bitwise OR between the read result and the value specified by OrData,
+  and writes the result to the 32-bit PCI configuration register specified by Address.
+  The value written to the PCI configuration register is returned.
+  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  OrData    The value to OR with the PCI configuration register.
+
+  @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentOr32 (
+  IN UINT64                    Address,
+  IN UINT32                    OrData
+  )
+{
+  return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) | OrData);
+}
+
+/**
+  Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value.
+
+  Reads the 32-bit PCI configuration register specified by Address,
+  performs a bitwise AND between the read result and the value specified by AndData,
+  and writes the result to the 32-bit PCI configuration register specified by Address.
+  The value written to the PCI configuration register is returned.
+  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  AndData   The value to AND with the PCI configuration register.
+
+  @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentAnd32 (
+  IN UINT64                    Address,
+  IN UINT32                    AndData
+  )
+{
+  return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) & AndData);
+}
+
+/**
+  Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value,
+  followed a  bitwise OR with another 32-bit value.
+
+  Reads the 32-bit PCI configuration register specified by Address,
+  performs a bitwise AND between the read result and the value specified by AndData,
+  performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+  and writes the result to the 32-bit PCI configuration register specified by Address.
+  The value written to the PCI configuration register is returned.
+  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  AndData   The value to AND with the PCI configuration register.
+  @param  OrData    The value to OR with the PCI configuration register.
+
+  @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentAndThenOr32 (
+  IN UINT64                    Address,
+  IN UINT32                    AndData,
+  IN UINT32                    OrData
+  )
+{
+  return PciSegmentWrite32 (Address, (PciSegmentRead32 (Address) & AndData) | OrData);
+}
+
+/**
+  Reads a bit field of a PCI configuration register.
+
+  Reads the bit field in a 32-bit PCI configuration register. The bit field is
+  specified by the StartBit and the EndBit. The value of the bit field is
+  returned.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 32-bit boundary, then ASSERT().
+  If StartBit is greater than 31, then ASSERT().
+  If EndBit is greater than 31, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to read.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..31.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..31.
+
+  @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldRead32 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit
+  )
+{
+  return BitFieldRead32 (PciSegmentRead32 (Address), StartBit, EndBit);
+}
+
+/**
+  Writes a bit field to a PCI configuration register.
+
+  Writes Value to the bit field of the PCI configuration register. The bit
+  field is specified by the StartBit and the EndBit. All other bits in the
+  destination PCI configuration register are preserved. The new value of the
+  32-bit register is returned.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 32-bit boundary, then ASSERT().
+  If StartBit is greater than 31, then ASSERT().
+  If EndBit is greater than 31, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to write.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..31.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..31.
+  @param  Value     The new value of the bit field.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldWrite32 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT32                    Value
+  )
+{
+  return PciSegmentWrite32 (
+           Address,
+           BitFieldWrite32 (PciSegmentRead32 (Address), StartBit, EndBit, Value)
+           );
+}
+
+/**
+  Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
+  writes the result back to the bit field in the 32-bit port.
+
+  Reads the 32-bit PCI configuration register specified by Address, performs a
+  bitwise OR between the read result and the value specified by
+  OrData, and writes the result to the 32-bit PCI configuration register
+  specified by Address. The value written to the PCI configuration register is
+  returned. This function must guarantee that all PCI read and write operations
+  are serialized. Extra left bits in OrData are stripped.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If StartBit is greater than 31, then ASSERT().
+  If EndBit is greater than 31, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to write.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..31.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..31.
+  @param  OrData    The value to OR with the PCI configuration register.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldOr32 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT32                    OrData
+  )
+{
+  return PciSegmentWrite32 (
+           Address,
+           BitFieldOr32 (PciSegmentRead32 (Address), StartBit, EndBit, OrData)
+           );
+}
+
+/**
+  Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
+  AND, and writes the result back to the bit field in the 32-bit register.
+
+
+  Reads the 32-bit PCI configuration register specified by Address, performs a bitwise
+  AND between the read result and the value specified by AndData, and writes the result
+  to the 32-bit PCI configuration register specified by Address. The value written to
+  the PCI configuration register is returned.  This function must guarantee that all PCI
+  read and write operations are serialized.  Extra left bits in AndData are stripped.
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 32-bit boundary, then ASSERT().
+  If StartBit is greater than 31, then ASSERT().
+  If EndBit is greater than 31, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to write.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..31.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..31.
+  @param  AndData   The value to AND with the PCI configuration register.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldAnd32 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT32                    AndData
+  )
+{
+  return PciSegmentWrite32 (
+           Address,
+           BitFieldAnd32 (PciSegmentRead32 (Address), StartBit, EndBit, AndData)
+           );
+}
+
+/**
+  Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
+  bitwise OR, and writes the result back to the bit field in the
+  32-bit port.
+
+  Reads the 32-bit PCI configuration register specified by Address, performs a
+  bitwise AND followed by a bitwise OR between the read result and
+  the value specified by AndData, and writes the result to the 32-bit PCI
+  configuration register specified by Address. The value written to the PCI
+  configuration register is returned. This function must guarantee that all PCI
+  read and write operations are serialized. Extra left bits in both AndData and
+  OrData are stripped.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If StartBit is greater than 31, then ASSERT().
+  If EndBit is greater than 31, then ASSERT().
+  If EndBit is less than StartBit, then ASSERT().
+  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+  @param  Address   The PCI configuration register to write.
+  @param  StartBit  The ordinal of the least significant bit in the bit field.
+                    Range 0..31.
+  @param  EndBit    The ordinal of the most significant bit in the bit field.
+                    Range 0..31.
+  @param  AndData   The value to AND with the PCI configuration register.
+  @param  OrData    The value to OR with the result of the AND operation.
+
+  @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldAndThenOr32 (
+  IN UINT64                    Address,
+  IN UINTN                     StartBit,
+  IN UINTN                     EndBit,
+  IN UINT32                    AndData,
+  IN UINT32                    OrData
+  )
+{
+  return PciSegmentWrite32 (
+           Address,
+           BitFieldAndThenOr32 (PciSegmentRead32 (Address), StartBit, EndBit, AndData, OrData)
+           );
+}
+
+/**
+  Reads a range of PCI configuration registers into a caller supplied buffer.
+
+  Reads the range of PCI configuration registers specified by StartAddress and
+  Size into the buffer specified by Buffer. This function only allows the PCI
+  configuration registers from a single PCI function to be read. Size is
+  returned. When possible 32-bit PCI configuration read cycles are used to read
+  from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+  and 16-bit PCI configuration read cycles may be used at the beginning and the
+  end of the range.
+
+  If any reserved bits in StartAddress are set, then ASSERT().
+  If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+  If Size > 0 and Buffer is NULL, then ASSERT().
+
+  @param  StartAddress  The starting address that encodes the PCI Segment, Bus, Device,
+                        Function and Register.
+  @param  Size          The size in bytes of the transfer.
+  @param  Buffer        The pointer to a buffer receiving the data read.
+
+  @return Size
+
+**/
+UINTN
+EFIAPI
+PciSegmentReadBuffer (
+  IN  UINT64                   StartAddress,
+  IN  UINTN                    Size,
+  OUT VOID                     *Buffer
+  )
+{
+  UINTN                                ReturnValue;
+
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0);
+  ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
+
+  if (Size == 0) {
+    return Size;
+  }
+
+  ASSERT (Buffer != NULL);
+
+  //
+  // Save Size for return
+  //
+  ReturnValue = Size;
+
+  if ((StartAddress & BIT0) != 0) {
+    //
+    // Read a byte if StartAddress is byte aligned
+    //
+    *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress);
+    StartAddress += sizeof (UINT8);
+    Size -= sizeof (UINT8);
+    Buffer = (UINT8*)Buffer + 1;
+  }
+
+  if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
+    //
+    // Read a word if StartAddress is word aligned
+    //
+    WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress));
+    StartAddress += sizeof (UINT16);
+    Size -= sizeof (UINT16);
+    Buffer = (UINT16*)Buffer + 1;
+  }
+
+  while (Size >= sizeof (UINT32)) {
+    //
+    // Read as many double words as possible
+    //
+    WriteUnaligned32 (Buffer, PciSegmentRead32 (StartAddress));
+    StartAddress += sizeof (UINT32);
+    Size -= sizeof (UINT32);
+    Buffer = (UINT32*)Buffer + 1;
+  }
+
+  if (Size >= sizeof (UINT16)) {
+    //
+    // Read the last remaining word if exist
+    //
+    WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress));
+    StartAddress += sizeof (UINT16);
+    Size -= sizeof (UINT16);
+    Buffer = (UINT16*)Buffer + 1;
+  }
+
+  if (Size >= sizeof (UINT8)) {
+    //
+    // Read the last remaining byte if exist
+    //
+    *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress);
+  }
+
+  return ReturnValue;
+}
+
+/**
+  Copies the data in a caller supplied buffer to a specified range of PCI
+  configuration space.
+
+  Writes the range of PCI configuration registers specified by StartAddress and
+  Size from the buffer specified by Buffer. This function only allows the PCI
+  configuration registers from a single PCI function to be written. Size is
+  returned. When possible 32-bit PCI configuration write cycles are used to
+  write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+  8-bit and 16-bit PCI configuration write cycles may be used at the beginning
+  and the end of the range.
+
+  If any reserved bits in StartAddress are set, then ASSERT().
+  If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+  If Size > 0 and Buffer is NULL, then ASSERT().
+
+  @param  StartAddress  The starting address that encodes the PCI Segment, Bus, Device,
+                        Function and Register.
+  @param  Size          The size in bytes of the transfer.
+  @param  Buffer        The pointer to a buffer containing the data to write.
+
+  @return The parameter of Size.
+
+**/
+UINTN
+EFIAPI
+PciSegmentWriteBuffer (
+  IN UINT64                    StartAddress,
+  IN UINTN                     Size,
+  IN VOID                      *Buffer
+  )
+{
+  UINTN                                ReturnValue;
+
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0);
+  ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
+
+  if (Size == 0) {
+    return 0;
+  }
+
+  ASSERT (Buffer != NULL);
+
+  //
+  // Save Size for return
+  //
+  ReturnValue = Size;
+
+  if ((StartAddress & BIT0) != 0) {
+    //
+    // Write a byte if StartAddress is byte aligned
+    //
+    PciSegmentWrite8 (StartAddress, *(UINT8*) Buffer);
+    StartAddress += sizeof (UINT8);
+    Size -= sizeof (UINT8);
+    Buffer = (UINT8*) Buffer + 1;
+  }
+
+  if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
+    //
+    // Write a word if StartAddress is word aligned
+    //
+    PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer));
+    StartAddress += sizeof (UINT16);
+    Size -= sizeof (UINT16);
+    Buffer = (UINT16*) Buffer + 1;
+  }
+
+  while (Size >= sizeof (UINT32)) {
+    //
+    // Write as many double words as possible
+    //
+    PciSegmentWrite32 (StartAddress, ReadUnaligned32 (Buffer));
+    StartAddress += sizeof (UINT32);
+    Size -= sizeof (UINT32);
+    Buffer = (UINT32*) Buffer + 1;
+  }
+
+  if (Size >= sizeof (UINT16)) {
+    //
+    // Write the last remaining word if exist
+    //
+    PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer));
+    StartAddress += sizeof (UINT16);
+    Size -= sizeof (UINT16);
+    Buffer = (UINT16*) Buffer + 1;
+  }
+
+  if (Size >= sizeof (UINT8)) {
+    //
+    // Write the last remaining byte if exist
+    //
+    PciSegmentWrite8 (StartAddress, *(UINT8*) Buffer);
+  }
+
+  return ReturnValue;
+}
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Library/BaseSiConfigBlockLib/BaseSiConfigBlockLib.c b/Silicon/Intel/TigerlakeSiliconPkg/Library/BaseSiConfigBlockLib/BaseSiConfigBlockLib.c
new file mode 100644
index 0000000000..4644de9b74
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Library/BaseSiConfigBlockLib/BaseSiConfigBlockLib.c
@@ -0,0 +1,86 @@
+/** @file
+  This file is BaseSiConfigBlockLib library is used to add config blocks
+  to config block header.
+
+  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#include <ConfigBlock.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/ConfigBlockLib.h>
+#include <Library/SiConfigBlockLib.h>
+
+
+/**
+  GetComponentConfigBlockTotalSize get config block table total size.
+
+  @param[in] ComponentBlocks    Component blocks array
+  @param[in] TotalBlockCount    Number of blocks
+
+  @retval                       Size of config block table
+**/
+UINT16
+EFIAPI
+GetComponentConfigBlockTotalSize (
+  IN COMPONENT_BLOCK_ENTRY *ComponentBlocks,
+  IN UINT16                TotalBlockCount
+  )
+{
+  UINT16            TotalBlockSize;
+  UINT16            BlockCount;
+
+  TotalBlockSize = 0;
+  for (BlockCount = 0 ; BlockCount < TotalBlockCount; BlockCount++) {
+    TotalBlockSize += (UINT32) ComponentBlocks[BlockCount].Size;
+    DEBUG ((DEBUG_INFO, "TotalBlockSize after adding Block[0x%x]= 0x%x\n", BlockCount, TotalBlockSize));
+  }
+
+  return TotalBlockSize;
+}
+
+/**
+  AddComponentConfigBlocks add all config blocks.
+
+  @param[in] ConfigBlockTableAddress    The pointer to add config blocks
+  @param[in] ComponentBlocks            Config blocks array
+  @param[in] TotalBlockCount            Number of blocks
+
+  @retval EFI_SUCCESS                   The policy default is initialized.
+  @retval EFI_OUT_OF_RESOURCES          Insufficient resources to create buffer
+**/
+EFI_STATUS
+EFIAPI
+AddComponentConfigBlocks (
+  IN VOID                  *ConfigBlockTableAddress,
+  IN COMPONENT_BLOCK_ENTRY *ComponentBlocks,
+  IN UINT16                TotalBlockCount
+  )
+{
+  UINT16            BlockCount;
+  VOID              *ConfigBlockPointer;
+  CONFIG_BLOCK      ConfigBlockBuf;
+  EFI_STATUS        Status;
+
+  Status = EFI_SUCCESS;
+
+  //
+  // Initialize ConfigBlockPointer to NULL
+  //
+  ConfigBlockPointer = NULL;
+  //
+  // Loop to identify each config block from ComponentBlocks[] Table and add each of them
+  //
+  for (BlockCount = 0; BlockCount < TotalBlockCount; BlockCount++) {
+    ZeroMem (&ConfigBlockBuf, sizeof (CONFIG_BLOCK));
+    CopyMem (&(ConfigBlockBuf.Header.GuidHob.Name), ComponentBlocks[BlockCount].Guid, sizeof (EFI_GUID));
+    ConfigBlockBuf.Header.GuidHob.Header.HobLength = ComponentBlocks[BlockCount].Size;
+    ConfigBlockBuf.Header.Revision        = ComponentBlocks[BlockCount].Revision;
+    ConfigBlockPointer = (VOID *)&ConfigBlockBuf;
+    Status = AddConfigBlock ((VOID *)ConfigBlockTableAddress, (VOID *)&ConfigBlockPointer);
+    ASSERT_EFI_ERROR (Status);
+    ComponentBlocks[BlockCount].LoadDefault (ConfigBlockPointer);
+  }
+  return Status;
+}
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Library/BaseSiConfigBlockLib/BaseSiConfigBlockLib.inf b/Silicon/Intel/TigerlakeSiliconPkg/Library/BaseSiConfigBlockLib/BaseSiConfigBlockLib.inf
new file mode 100644
index 0000000000..e23b2d342f
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Library/BaseSiConfigBlockLib/BaseSiConfigBlockLib.inf
@@ -0,0 +1,33 @@
+## @file
+# Component description file for the BaseSiConfigBlockLib library.
+#
+#  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#  SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+
+[Defines]
+INF_VERSION = 0x00010017
+BASE_NAME = BaseSiConfigBlockLib
+FILE_GUID = 6C068D0F-F48E-48CB-B369-433E507AF4A2
+VERSION_STRING = 1.0
+MODULE_TYPE = BASE
+LIBRARY_CLASS = SiConfigBlockLib
+
+
+[LibraryClasses]
+DebugLib
+IoLib
+ConfigBlockLib
+
+
+[Packages]
+MdePkg/MdePkg.dec
+TigerlakeSiliconPkg/SiPkg.dec
+
+
+[Sources]
+BaseSiConfigBlockLib.c
+
+
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Library/PeiDxeSmmMmPciLib/PeiDxeSmmMmPciLib.c b/Silicon/Intel/TigerlakeSiliconPkg/Library/PeiDxeSmmMmPciLib/PeiDxeSmmMmPciLib.c
new file mode 100644
index 0000000000..48e14dc9ee
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Library/PeiDxeSmmMmPciLib/PeiDxeSmmMmPciLib.c
@@ -0,0 +1,35 @@
+/** @file
+  This file contains routines that get PCI Express Address
+
+  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#include <Library/BaseLib.h>
+#include <Library/PcdLib.h>
+#include <Library/DebugLib.h>
+
+/**
+  This procedure will get PCIE address
+
+  @param[in] Bus                  Pci Bus Number
+  @param[in] Device               Pci Device Number
+  @param[in] Function             Pci Function Number
+
+  @retval PCIE address
+**/
+UINTN
+EFIAPI
+MmPciBase (
+  IN UINT32                       Bus,
+  IN UINT32                       Device,
+  IN UINT32                       Function
+  )
+{
+  ASSERT ((Bus <= 0xFF) && (Device <= 0x1F) && (Function <= 0x7));
+
+#ifdef FSP_FLAG
+  return ((UINTN) PcdGet64 (PcdSiPciExpressBaseAddress) + (UINTN) (Bus << 20) + (UINTN) (Device << 15) + (UINTN) (Function << 12));
+#else
+  return ((UINTN) PcdGet64 (PcdPciExpressBaseAddress)   + (UINTN) (Bus << 20) + (UINTN) (Device << 15) + (UINTN) (Function << 12));
+#endif
+}
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Library/PeiDxeSmmMmPciLib/PeiDxeSmmMmPciLib.inf b/Silicon/Intel/TigerlakeSiliconPkg/Library/PeiDxeSmmMmPciLib/PeiDxeSmmMmPciLib.inf
new file mode 100644
index 0000000000..353b97f3f6
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Library/PeiDxeSmmMmPciLib/PeiDxeSmmMmPciLib.inf
@@ -0,0 +1,43 @@
+## @file
+# Component description file for the PeiDxeSmmMmPciLib
+#
+#  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#  SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+
+[Defines]
+INF_VERSION = 0x00010017
+BASE_NAME = PeiDxeSmmMmPciLib
+FILE_GUID = D03D6670-A032-11E2-9E96-0800200C9A66
+VERSION_STRING = 1.0
+MODULE_TYPE = BASE
+LIBRARY_CLASS = MmPciLib
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+
+
+[LibraryClasses]
+BaseLib
+PcdLib
+DebugLib
+
+
+[Packages]
+MdePkg/MdePkg.dec
+TigerlakeSiliconPkg/SiPkg.dec
+
+
+[Pcd]
+gSiPkgTokenSpaceGuid.PcdSiPciExpressBaseAddress
+
+[FixedPcd]
+gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress
+
+[Sources]
+PeiDxeSmmMmPciLib.c
-- 
2.24.0.windows.2