From: "Jeremy Linton" <jeremy.linton@arm.com>
To: devel@edk2.groups.io
Cc: pete@akeo.ie, awarkentin@vmware.com,
samer.el-haj-mahmoud@arm.com, leif@nuviainc.com,
ardb+tianocore@kernel.org, Jeremy Linton <jeremy.linton@arm.com>
Subject: [PATCH v2 4/4] Platform/RaspberryPi: Invert default Arasan, Emmc2 routing
Date: Mon, 1 Feb 2021 16:53:43 -0600 [thread overview]
Message-ID: <20210201225343.2001835-5-jeremy.linton@arm.com> (raw)
In-Reply-To: <20210201225343.2001835-1-jeremy.linton@arm.com>
In order for the wifi to work, and the SD to run at full
speed we need to bind the sd slot to the eMMC2 controller.
Since we now have a driver for the eMMC2 controller
there isn't any reason to leave the SD card bound
to the older Arasan controller.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
Platform/RaspberryPi/RPi4/RPi4.dsc | 2 +-
Platform/RaspberryPi/RPi4/Readme.md | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Platform/RaspberryPi/RPi4/RPi4.dsc b/Platform/RaspberryPi/RPi4/RPi4.dsc
index 9962df0076..e0fad6f744 100644
--- a/Platform/RaspberryPi/RPi4/RPi4.dsc
+++ b/Platform/RaspberryPi/RPi4/RPi4.dsc
@@ -475,7 +475,7 @@
# SD-related.
#
- gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|L"SdIsArasan"|gConfigDxeFormSetGuid|0x0|1
+ gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|L"SdIsArasan"|gConfigDxeFormSetGuid|0x0|0
gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|L"MmcForce1Bit"|gConfigDxeFormSetGuid|0x0|0
gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|L"MmcForceDefaultSpeed"|gConfigDxeFormSetGuid|0x0|0
gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|L"MmcSdDefaultSpeedMHz"|gConfigDxeFormSetGuid|0x0|25
diff --git a/Platform/RaspberryPi/RPi4/Readme.md b/Platform/RaspberryPi/RPi4/Readme.md
index 3b2ed44e3c..80899f4ca4 100644
--- a/Platform/RaspberryPi/RPi4/Readme.md
+++ b/Platform/RaspberryPi/RPi4/Readme.md
@@ -181,7 +181,7 @@ Limit RAM to 3 GB | `RamLimitTo3GB` | Disable = `0x00000000` <br> Ena
System Table Selection | `SystemTableMode`| ACPI = `0x00000000` (default)<br> ACPI + Devicetree = `0x00000001` <br> Devicetree = `0x00000002`
Asset Tag | `AssetTag` | String, 32 characters or less (e.g. `L"ABCD123"`)<br> (default `L""`)
**SD/MMC Configuration** |
-uSD/eMMC Routing | `SdIsArasan` | Arasan SDHC = `0x00000001` (default) <br> eMMC2 SDHCI = `0x00000000`
+uSD/eMMC Routing | `SdIsArasan` | Arasan SDHC = `0x00000001` <br> eMMC2 SDHCI = `0x00000000` (default)
Multi-Block Support | `MmcDisableMulti` | Multi-block transfers = `0x00000000` (default)<br> Single block transfers = `0x00000001`
uSD Max Bus Width | `MmcForce1Bit` | 4-bit Mode = `0x00000000` (default)<br> 1-bit Mode = `0x00000001`
uSD Force Default Speed | `MmcForceDefaultSpeed` | Allow High Speed = `0x00000000` (default)<br> Force Default Speed = `0x00000001`
--
2.13.7
next prev parent reply other threads:[~2021-02-01 22:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-01 22:53 [PATCH v2 0/4] RPi: SD/Wifi Acpi updates Jeremy Linton
2021-02-01 22:53 ` [PATCH v2 1/4] Platform/RaspberryPi: Add Negative table check Jeremy Linton
2021-02-08 17:08 ` Pete Batard
2021-02-08 17:24 ` Andrei Warkentin
2021-02-01 22:53 ` [PATCH] Platform/RaspberryPi/Acpitables: Add eMMC2 device and tweak Arasan Jeremy Linton
2021-02-08 17:08 ` Pete Batard
2021-02-08 17:25 ` Andrei Warkentin
2021-02-01 22:53 ` [PATCH v2 3/4] Platform/RaspberryPi: User control of eMMC2 DMA Jeremy Linton
2021-02-08 17:08 ` Pete Batard
2021-02-08 17:26 ` Andrei Warkentin
2021-02-01 22:53 ` Jeremy Linton [this message]
2021-02-08 17:09 ` [PATCH v2 4/4] Platform/RaspberryPi: Invert default Arasan, Emmc2 routing Pete Batard
2021-02-08 17:26 ` Andrei Warkentin
2021-02-11 8:07 ` [PATCH v2 0/4] RPi: SD/Wifi Acpi updates Ard Biesheuvel
2021-02-16 23:23 ` [edk2-devel] " Jeremy Linton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210201225343.2001835-5-jeremy.linton@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox