* [Patch V2 40/40] Maintainers.txt: Add TigerlakeSiliconPkg maintainers
@ 2021-02-05 0:38 Heng Luo
2021-02-05 1:08 ` Chaganty, Rangasai V
0 siblings, 1 reply; 3+ messages in thread
From: Heng Luo @ 2021-02-05 0:38 UTC (permalink / raw)
To: devel; +Cc: Sai Chaganty, Nate DeSimone
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3171
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
---
Maintainers.txt | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Maintainers.txt b/Maintainers.txt
index 56e16fc48c..34f0b58581 100644
--- a/Maintainers.txt
+++ b/Maintainers.txt
@@ -242,6 +242,12 @@ F: Silicon/Intel/KabylakeSiliconPkg/
M: Chasel Chiu <chasel.chiu@intel.com>
M: Sai Chaganty <rangasai.v.chaganty@intel.com>
+Silicon/Intel/TigerlakeSiliconPkg
+F: Silicon/Intel/TigerlakeSiliconPkg/
+M: Sai Chaganty <rangasai.v.chaganty@intel.com>
+M: Nate DeSimone <nathaniel.l.desimone@intel.com>
+R: Heng Luo <heng.luo@intel.com>
+
Silicon/Intel/SimicsX58SktPkg
F: Silicon/Intel/SimicsX58SktPkg/
M: Agyeman Prince <prince.agyeman@intel.com>
--
2.24.0.windows.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [Patch V2 40/40] Maintainers.txt: Add TigerlakeSiliconPkg maintainers
2021-02-05 0:38 [Patch V2 40/40] Maintainers.txt: Add TigerlakeSiliconPkg maintainers Heng Luo
@ 2021-02-05 1:08 ` Chaganty, Rangasai V
0 siblings, 0 replies; 3+ messages in thread
From: Chaganty, Rangasai V @ 2021-02-05 1:08 UTC (permalink / raw)
To: Luo, Heng, devel@edk2.groups.io; +Cc: Desimone, Nathaniel L
Reviewed-by: Sai Chaganty <rangasai.v.chaganty@intel.com>
-----Original Message-----
From: Luo, Heng <heng.luo@intel.com>
Sent: Thursday, February 04, 2021 4:39 PM
To: devel@edk2.groups.io
Cc: Chaganty, Rangasai V <rangasai.v.chaganty@intel.com>; Desimone, Nathaniel L <nathaniel.l.desimone@intel.com>
Subject: [Patch V2 40/40] Maintainers.txt: Add TigerlakeSiliconPkg maintainers
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3171
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
---
Maintainers.txt | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Maintainers.txt b/Maintainers.txt index 56e16fc48c..34f0b58581 100644
--- a/Maintainers.txt
+++ b/Maintainers.txt
@@ -242,6 +242,12 @@ F: Silicon/Intel/KabylakeSiliconPkg/
M: Chasel Chiu <chasel.chiu@intel.com> M: Sai Chaganty <rangasai.v.chaganty@intel.com> +Silicon/Intel/TigerlakeSiliconPkg+F: Silicon/Intel/TigerlakeSiliconPkg/+M: Sai Chaganty <rangasai.v.chaganty@intel.com>+M: Nate DeSimone <nathaniel.l.desimone@intel.com>+R: Heng Luo <heng.luo@intel.com>+ Silicon/Intel/SimicsX58SktPkg F: Silicon/Intel/SimicsX58SktPkg/ M: Agyeman Prince <prince.agyeman@intel.com>--
2.24.0.windows.2
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Patch V2 01/40] TigerlakeSiliconPkg: Add package and Include/ConfigBlock headers
@ 2021-02-04 8:48 Heng Luo
[not found] ` <20210204084919.3603-40-heng.luo@intel.com>
0 siblings, 1 reply; 3+ messages in thread
From: Heng Luo @ 2021-02-04 8:48 UTC (permalink / raw)
To: devel; +Cc: Sai Chaganty, Nate DeSimone
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3171
Create the TigerlakeSiliconPkg to provide an initial package for
silicon initialization code for Tiger Lake (TGL) products.
* Major areas of functionality are categorized into CPU, IpBlock, Fru,
Platform Controller Hub (PCH), and System Agent subdirectories.
* Common libraries and headers are kept at the root of the package.
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
---
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Cnvi/CnviConfig.h | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/CpuDmi/CpuDmiPreMemConfig.h | 86 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h | 498 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Dci/DciConfig.h | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Espi/EspiConfig.h | 61 ++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h | 170 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gbe/GbeConfig.h | 33 +++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gna/GnaConfig.h | 31 ++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h | 37 ++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h | 211 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Hda/HdAudioConfig.h | 227 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HostBridge/HostBridgeConfig.h | 62 +++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HybridGraphics/HybridGraphicsConfig.h | 66 +++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HybridStorage/HybridStorageConfig.h | 36 +++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Ieh/IehConfig.h | 34 ++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Ish/IshConfig.h | 134 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h | 58 ++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Itss/IoApicConfig.h | 60 +++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Me/MePeiConfig.h | 117 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h | 478 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Overclocking/OverclockingConfig.h | 236 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/P2sb/P2sbConfig.h | 34 ++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h | 44 +++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h | 368 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h | 217 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h | 86 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h | 391 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Psf/PsfConfig.h | 32 ++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Rst/RstConfig.h | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h | 38 +++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Sata/SataConfig.h | 168 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Scs/ScsConfig.h | 139 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h | 32 ++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SiConfig.h | 152 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h | 50 ++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Spi/SpiConfig.h | 43 ++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h | 145 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Thc/ThcConfig.h | 73 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Thermal/ThermalConfig.h | 153 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/TraceHub/TraceHubConfig.h | 101 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/Usb2PhyConfig.h | 81 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/Usb3HsioConfig.h | 138 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/UsbConfig.h | 149 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/VoltageRegulator/CpuPowerMgmtVrConfig.h | 114 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Vtd/VtdConfig.h | 64 ++++++++++++++++++++++++++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h | 31 ++++++++++++++++++++++++
Silicon/Intel/TigerlakeSiliconPkg/SiPkg.dec | 1207 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
48 files changed, 6973 insertions(+)
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Cnvi/CnviConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Cnvi/CnviConfig.h
new file mode 100644
index 0000000000..de1f4159f0
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Cnvi/CnviConfig.h
@@ -0,0 +1,67 @@
+/** @file
+ CNVi policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _CNVI_CONFIG_H_
+#define _CNVI_CONFIG_H_
+
+#define CNVI_CONFIG_REVISION 1
+extern EFI_GUID gCnviConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ CNVi Mode options
+**/
+typedef enum {
+ CnviModeDisabled = 0,
+ CnviModeAuto
+} CNVI_MODE;
+
+
+/**
+ CNVi signals pin muxing settings. If signal can be enable only on a single pin
+ then this parameter is ignored by RC. Refer to GPIO_*_MUXING_CNVI_* in GpioPins*.h
+ for supported settings on a given platform
+**/
+typedef struct {
+ UINT32 RfReset; ///< RF_RESET# Pin mux configuration. Refer to GPIO_*_MUXING_CNVI_RF_RESET_*
+ UINT32 Clkreq; ///< CLKREQ Pin mux configuration. Refer to GPIO_*_MUXING_CNVI_*_CLKREQ_*
+} CNVI_PIN_MUX;
+
+/**
+ The CNVI_CONFIG block describes the expected configuration of the CNVi IP.
+
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ This option allows for automatic detection of Connectivity Solution.
+ Auto Detection assumes that CNVi will be enabled when available;
+ Disable allows for disabling CNVi.
+ CnviModeDisabled = Disabled,
+ <b>CnviModeAuto = Auto Detection</b>
+ **/
+ UINT32 Mode : 1;
+ UINT32 BtCore : 1; ///< The option to turn ON or OFF the BT Core. 0: Disabled, <b>1: Enabled</b>
+ /**
+ The option to enable or disable BT Audio Offload.
+ <b>0: Disabled</b>, 1: Enabled
+ @note This feature only support with Intel(R) Wireless-AX 22560
+ **/
+ UINT32 BtAudioOffload : 1;
+ UINT32 RsvdBits : 29;
+ /**
+ CNVi PinMux Configuration
+ RESET#/CLKREQ to CRF, can have two alternative mappings, depending on board routing requirements.
+ **/
+ CNVI_PIN_MUX PinMux;
+} CNVI_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _CNVI_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/CpuDmi/CpuDmiPreMemConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/CpuDmi/CpuDmiPreMemConfig.h
new file mode 100644
index 0000000000..527febb0a4
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/CpuDmi/CpuDmiPreMemConfig.h
@@ -0,0 +1,86 @@
+/** @file
+ DMI policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _CPU_DMI_PREMEM_CONFIG_H_
+#define _CPU_DMI_PREMEM_CONFIG_H_
+
+#include <ConfigBlock.h>
+#include <Register/SaRegsHostBridge.h>
+
+#define DMI_CONFIG_REVISION 1
+
+#define CPU_DMI_HWEQ_COEFFS_MAX 8
+
+#pragma pack (push,1)
+///
+/// The values before AutoConfig match the setting of PCI Express Base Specification 1.1, please be careful for adding new feature
+///
+typedef enum {
+ DmiAspmDisabled,
+ DmiAspmL0s,
+ DmiAspmL1,
+ DmiAspmL0sL1,
+ DmiAspmAutoConfig,
+ DmiAspmMax
+} DMI_ASPM;
+
+
+/**
+ The CPU_DMI_CONFIG block describes the expected configuration of the CPU for DMI.
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+
+/**
+ - <b>Auto</b> (0x0) : Maximum possible link speed (Default)
+ - Gen1 (0x1) : Limit Link to Gen1 Speed
+ - Gen2 (0x2) : Limit Link to Gen2 Speed CpuDmiPreMemConfig
+ - Gen3 (0x3) : Limit Link to Gen3 Speed
+ **/
+ UINT8 DmiMaxLinkSpeed;
+ /**
+ <b>(Test)</b> DMI Equalization Phase 2 Enable Control
+ - Disabled (0x0) : Disable phase 2
+ - Enabled (0x1) : Enable phase 2
+ - <b>Auto</b> (0x2) : Use the current default method (Default)
+ **/
+ UINT8 DmiGen3EqPh2Enable;
+ /**
+ <b>(Test)</b> Selects the method for performing Phase3 of Gen3 Equalization on DMI
+ - <b>Auto</b> (0x0) : Use the current default method (Default)
+ - HwEq (0x1) : Use Adaptive Hardware Equalization
+ - SwEq (0x2) : Use Adaptive Software Equalization (Implemented in BIOS Reference Code)
+ - Static (0x3) : Use the Static EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just Phase1)
+ - Disabled (0x4) : Bypass Equalization Phase 3
+ **/
+ UINT8 DmiGen3EqPh3Method;
+ /**
+ <b>(Test)</b> Program DMI Gen3 EQ Phase1 Static Presets
+ - Disabled (0x0) : Disable EQ Phase1 Static Presets Programming
+ - <b>Enabled</b> (0x1) : Enable EQ Phase1 Static Presets Programming (Default)
+ **/
+ UINT8 DmiGen3ProgramStaticEq;
+ UINT8 DmiDeEmphasis; ///< DeEmphasis control for DMI (-6 dB and -3.5 dB are the options)
+ UINT8 DmiAspm;
+ UINT8 DmiAspmCtrl; ///< ASPM configuration on the CPU side of the DMI/OPI Link. Default is <b>DmiAspmAutoConfig</b>
+ UINT8 DmiAspmL1ExitLatency; ///< ASPM configuration on the CPU side of the DMI/OPI Link. Default is <b>DmiAspmAutoConfig</b>
+ UINT8 DmiGen3RootPortPreset[SA_DMI_MAX_LANE]; ///< Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
+ UINT8 DmiGen3EndPointPreset[SA_DMI_MAX_LANE]; ///< Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+ UINT8 DmiGen3EndPointHint[SA_DMI_MAX_LANE]; ///< Hint value per lane for the DMI Gen3 End Point. Range: 0-6, 2 is default for each lane
+
+ /**
+ DMI Gen3 RxCTLEp per-Bundle control. The range of the setting is (0-15). This setting
+ has to be specified based upon platform design and must follow the guideline. Default is 12.
+ **/
+
+ UINT8 DmiGen3RxCtlePeaking[SA_DMI_MAX_BUNDLE];
+} CPU_DMI_PREMEM_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _CPU_DMI_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h
new file mode 100644
index 0000000000..f18cd0352a
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h
@@ -0,0 +1,498 @@
+/** @file
+ Pcie root port policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _CPU_PCIE_CONFIG_H_
+#define _CPU_PCIE_CONFIG_H_
+
+#include <Library/GpioLib.h>
+#include <Library/CpuPcieInfoFruLib.h>
+#include <PcieConfig.h>
+#include <ConfigBlock.h>
+#include <Register/SaRegsHostBridge.h>
+
+#pragma pack(push, 1)
+
+#define CPU_PCIE_PEI_PREMEM_CONFIG_REVISION 1
+#define CPU_PCIE_RP_PREMEM_CONFIG_REVISION 4
+
+/**
+ Making any setup structure change after code frozen
+ will need to maintain backward compatibility, bump up
+ structure revision and update below history table\n
+ <b>Revision 1</b>: - Initial version.
+ <b>Revision 2</b>: - Add Gen3TxOverride and Gen4TxOverride
+ <b>Revision 3</b>: - Deprecate Dekel Suqelch Workaround Setup Variable
+ <b>Revision 4</b>: - Add FOMS Control Policy Setup Variable
+ <b>Revision 5</b>: - Add Gen3HwEqOverride and Gen4HwEqOverride
+ <b>Revision 6</b>: - Align revision with CPU_PCIE_RP_CONFIG_REVISION value
+**/
+
+#define CPU_PCIE_RP_CONFIG_REVISION 6
+
+#define L0_SET BIT0
+#define L1_SET BIT1
+
+
+
+
+/**
+ PCI Express and DMI controller configuration\n
+ @note <b>Optional.</b> These policies will be ignored if there is no PEG port present on board.
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28:0 :
+ <b>(Test)</b> DMI Link Speed Control
+ - <b>Auto</b> (0x0) : Maximum possible link speed (Default)
+ - Gen1 (0x1) : Limit Link to Gen1 Speed
+ - Gen2 (0x2) : Limit Link to Gen2 Speed
+ - Gen3 (0x3) : Limit Link to Gen3 Speed
+ **/
+ UINT32 DmiMaxLinkSpeed : 2;
+ /**
+ Offset 28:2 :
+ <b>(Test)</b> DMI Equalization Phase 2 Enable Control
+ - Disabled (0x0) : Disable phase 2
+ - Enabled (0x1) : Enable phase 2
+ - <b>Auto</b> (0x2) : Use the current default method (Default)
+ **/
+ UINT32 DmiGen3EqPh2Enable : 2;
+ /**
+ Offset 28:4 :
+ <b>(Test)</b> Selects the method for performing Phase3 of Gen3 Equalization on DMI
+ - <b>Auto</b> (0x0) : Use the current default method (Default)
+ - HwEq (0x1) : Use Adaptive Hardware Equalization
+ - SwEq (0x2) : Use Adaptive Software Equalization (Implemented in BIOS Reference Code)
+ - Static (0x3) : Use the Static EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just Phase1)
+ - Disabled (0x4) : Bypass Equalization Phase 3
+ **/
+ UINT32 DmiGen3EqPh3Method : 3;
+ /**
+ Offset 28:7 :
+ <b>(Test)</b> Program DMI Gen3 EQ Phase1 Static Presets
+ - Disabled (0x0) : Disable EQ Phase1 Static Presets Programming
+ - <b>Enabled</b> (0x1) : Enable EQ Phase1 Static Presets Programming (Default)
+ **/
+ UINT32 DmiGen3ProgramStaticEq : 1;
+ UINT32 RsvdBits0 : 24; ///< Offset 28:8 :Reserved for future use
+
+ /**
+ Offset 32:0 :
+ Select when PCIe ASPM programming will happen in relation to the Oprom
+ - <b>Before</b> (0x0) : Do PCIe ASPM programming before Oprom. (Default)
+ - After (0x1) : Do PCIe ASPM programming after Oprom. This will require an SMI handler to save/restore ASPM settings.
+ **/
+ UINT32 InitPcieAspmAfterOprom : 1;
+ UINT32 RsvdBits1 : 31; ///< Offset 32:1 :Reserved for future use
+
+ UINT8 DmiGen3RootPortPreset[SA_DMI_MAX_LANE]; ///< Offset 36 Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
+ UINT8 DmiGen3EndPointPreset[SA_DMI_MAX_LANE]; ///< Offset 40/44 Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+ UINT8 DmiGen3EndPointHint[SA_DMI_MAX_LANE]; ///< Offset 44/52 Hint value per lane for the DMI Gen3 End Point. Range: 0-6, 2 is default for each lane
+ /**
+ Offset 48/60 :
+ DMI Gen3 RxCTLEp per-Bundle control. The range of the setting is (0-15). This setting
+ has to be specified based upon platform design and must follow the guideline. Default is 12.
+ **/
+
+ UINT8 DmiGen3RxCtlePeaking[SA_DMI_MAX_BUNDLE];
+
+ UINT8 DmiDeEmphasis; ///< Offset 64 This field is used to describe the DeEmphasis control for DMI (-6 dB and -3.5 dB are the options)
+ UINT8 Rsvd0[3]; ///< Offset 65
+} PCIE_PEI_PREMEM_CONFIG;
+
+
+/**
+ CPU PCIe Root Port Pre-Memory Configuration
+ Contains Root Port settings and capabilities
+ <b>Revision 1</b>: - Initial version.
+ <b>Revision 2</b>: - Adding Dekel Suqelch Workaround Setup Variable
+ <b>Revision 3</b>: - Deprecate Dekel Suqelch Workaround Setup Variable
+ <b>Revision 4</b>: - Adding CDR Relock Setup Variable
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ Root Port enabling mask.
+ Bit0 presents RP1, Bit1 presents RP2, and so on.
+ 0: Disable; <b>1: Enable</b>.
+ **/
+ UINT32 RpEnabledMask;
+ /**
+ Assertion on Link Down GPIOs
+ - <b>Disabled</b> (0x0) : Disable assertion on Link Down GPIOs(Default)
+ - Enabled (0x1) : Enable assertion on Link Down GPIOs
+ **/
+ UINT8 LinkDownGpios;
+ /**
+ Enable ClockReq Messaging
+ - <b>Disabled</> (0x0) : Disable ClockReq Messaging(Default)
+ - Enabled (0x1) : Enable ClockReq Messaging
+ **/
+ UINT8 ClkReqMsgEnable;
+ /**
+ Dekel Recipe Workaround
+ <b>2</b>
+ 1=Minimal, 9=Maximum,
+ **/
+ UINT8 DekelSquelchWa; // Deprecated variable
+ UINT8 Rsvd0[1];
+ /**
+ Determines each PCIE Port speed capability.
+ <b>0: Auto</b>; 1: Gen1; 2: Gen2; 3: Gen3; 4: Gen4 (see: CPU_PCIE_SPEED)
+ **/
+ UINT8 PcieSpeed[CPU_PCIE_MAX_ROOT_PORTS];
+ /**
+ To Enable/Disable CDR Relock
+ <b>0: Disable</b>; 1: Enable
+ **/
+ UINT8 CdrRelock[CPU_PCIE_MAX_ROOT_PORTS];
+ /**
+ This policy is used while programming DEKEL Recipe
+ <b>0: Disable</b>; 1: Enable
+ **/
+ UINT8 Xl1el[CPU_PCIE_MAX_ROOT_PORTS];
+
+} CPU_PCIE_RP_PREMEM_CONFIG;
+
+typedef enum {
+ CpuPcieOverrideDisabled = 0,
+ CpuPcieL1L2Override = 0x01,
+ CpuPcieL1SubstatesOverride = 0x02,
+ CpuPcieL1L2AndL1SubstatesOverride = 0x03,
+ CpuPcieLtrOverride = 0x04
+} CPU_PCIE_OVERRIDE_CONFIG;
+
+/**
+ PCIe device table entry entry
+
+ The PCIe device table is being used to override PCIe device ASPM settings.
+ To take effect table consisting of such entries must be instelled as PPI
+ on gPchPcieDeviceTablePpiGuid.
+ Last entry VendorId must be 0.
+**/
+typedef struct {
+ UINT16 VendorId; ///< The vendor Id of Pci Express card ASPM setting override, 0xFFFF means any Vendor ID
+ UINT16 DeviceId; ///< The Device Id of Pci Express card ASPM setting override, 0xFFFF means any Device ID
+ UINT8 RevId; ///< The Rev Id of Pci Express card ASPM setting override, 0xFF means all steppings
+ UINT8 BaseClassCode; ///< The Base Class Code of Pci Express card ASPM setting override, 0xFF means all base class
+ UINT8 SubClassCode; ///< The Sub Class Code of Pci Express card ASPM setting override, 0xFF means all sub class
+ UINT8 EndPointAspm; ///< Override device ASPM (see: CPU_PCIE_ASPM_CONTROL)
+ ///< Bit 1 must be set in OverrideConfig for this field to take effect
+ UINT16 OverrideConfig; ///< The override config bitmap (see: CPU_PCIE_OVERRIDE_CONFIG).
+ /**
+ The L1Substates Capability Offset Override. (applicable if bit 2 is set in OverrideConfig)
+ This field can be zero if only the L1 Substate value is going to be override.
+ **/
+ UINT16 L1SubstatesCapOffset;
+ /**
+ L1 Substate Capability Mask. (applicable if bit 2 is set in OverrideConfig)
+ Set to zero then the L1 Substate Capability [3:0] is ignored, and only L1s values are override.
+ Only bit [3:0] are applicable. Other bits are ignored.
+ **/
+ UINT8 L1SubstatesCapMask;
+ /**
+ L1 Substate Port Common Mode Restore Time Override. (applicable if bit 2 is set in OverrideConfig)
+ L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue.
+ If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored,
+ and only L1SubstatesCapOffset is override.
+ **/
+ UINT8 L1sCommonModeRestoreTime;
+ /**
+ L1 Substate Port Tpower_on Scale Override. (applicable if bit 2 is set in OverrideConfig)
+ L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue.
+ If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored,
+ and only L1SubstatesCapOffset is override.
+ **/
+ UINT8 L1sTpowerOnScale;
+ /**
+ L1 Substate Port Tpower_on Value Override. (applicable if bit 2 is set in OverrideConfig)
+ L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue.
+ If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored,
+ and only L1SubstatesCapOffset is override.
+ **/
+ UINT8 L1sTpowerOnValue;
+
+ /**
+ SnoopLatency bit definition
+ Note: All Reserved bits must be set to 0
+
+ BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid
+ When clear values in bits 9:0 will be ignored
+ BITS[14:13] - Reserved
+ BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits
+ 000b - 1 ns
+ 001b - 32 ns
+ 010b - 1024 ns
+ 011b - 32,768 ns
+ 100b - 1,048,576 ns
+ 101b - 33,554,432 ns
+ 110b - Reserved
+ 111b - Reserved
+ BITS[9:0] - Snoop Latency Value. The value in these bits will be multiplied with
+ the scale in bits 12:10
+
+ This field takes effect only if bit 3 is set in OverrideConfig.
+ **/
+ UINT16 SnoopLatency;
+ /**
+ NonSnoopLatency bit definition
+ Note: All Reserved bits must be set to 0
+
+ BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid
+ When clear values in bits 9:0 will be ignored
+ BITS[14:13] - Reserved
+ BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits
+ 000b - 1 ns
+ 001b - 32 ns
+ 010b - 1024 ns
+ 011b - 32,768 ns
+ 100b - 1,048,576 ns
+ 101b - 33,554,432 ns
+ 110b - Reserved
+ 111b - Reserved
+ BITS[9:0] - Non Snoop Latency Value. The value in these bits will be multiplied with
+ the scale in bits 12:10
+
+ This field takes effect only if bit 3 is set in OverrideConfig.
+ **/
+ UINT16 NonSnoopLatency;
+
+ /**
+ Forces LTR override to be permanent
+ The default way LTR override works is:
+ rootport uses LTR override values provided by BIOS until connected device sends an LTR message, then it will use values from the message
+ This settings allows force override of LTR mechanism. If it's enabled, then:
+ rootport will use LTR override values provided by BIOS forever; LTR messages sent from connected device will be ignored
+ **/
+ UINT8 ForceLtrOverride;
+ UINT8 Reserved[3];
+} CPU_PCIE_DEVICE_OVERRIDE;
+
+enum CPU_PCIE_SPEED {
+ CpuPcieAuto,
+ CpuPcieGen1,
+ CpuPcieGen2,
+ CpuPcieGen3,
+ CpuPcieGen4,
+ CpuPcieGen5
+};
+
+///
+/// The values before AutoConfig match the setting of PCI Express Base Specification 1.1, please be careful for adding new feature
+///
+typedef enum {
+ CpuPcieAspmDisabled,
+ CpuPcieAspmL0s,
+ CpuPcieAspmL1,
+ CpuPcieAspmL0sL1,
+ CpuPcieAspmAutoConfig,
+ CpuPcieAspmMax
+} CPU_PCIE_ASPM_CONTROL;
+
+/**
+ Refer to SA EDS for the SA implementation values corresponding
+ to below PCI-E spec defined ranges
+**/
+typedef enum {
+ CpuPcieL1SubstatesDisabled,
+ CpuPcieL1SubstatesL1_1,
+ CpuPcieL1SubstatesL1_1_2,
+ CpuPcieL1SubstatesMax
+} CPU_PCIE_L1SUBSTATES_CONTROL;
+
+enum CPU_PCIE_MAX_PAYLOAD {
+ CpuPcieMaxPayload128 = 0,
+ CpuPcieMaxPayload256,
+ CpuPcieMaxPayload512,
+ CpuPcieMaxPayloadMax
+};
+
+enum CPU_PCIE_COMPLETION_TIMEOUT {
+ CpuPcieCompletionTO_Default,
+ CpuPcieCompletionTO_50_100us,
+ CpuPcieCompletionTO_1_10ms,
+ CpuPcieCompletionTO_16_55ms,
+ CpuPcieCompletionTO_65_210ms,
+ CpuPcieCompletionTO_260_900ms,
+ CpuPcieCompletionTO_1_3P5s,
+ CpuPcieCompletionTO_4_13s,
+ CpuPcieCompletionTO_17_64s,
+ CpuPcieCompletionTO_Disabled
+};
+
+
+enum CPU_PCIE_GEN3_PRESET_COEFF_SELECTION {
+ CpuPcieGen3PresetSelection,
+ CpuPcieGen3CoefficientSelection
+};
+
+enum CPU_PCIE_GEN4_PRESET_COEFF_SELECTION {
+ CpuPcieGen4PresetSelection,
+ CpuPcieGen4CoefficientSelection
+};
+
+typedef enum {
+ CpuPcieEqDefault = 0, ///< @deprecated since revision 3. Behaves as PchPcieEqHardware.
+ CpuPcieEqHardware = 1, ///< Hardware equalization
+ CpuPcieEqStaticCoeff = 4 ///< Fixed equalization (requires Coefficient settings per lane)
+} CPU_PCIE_EQ_METHOD;
+
+
+/**
+ Represent lane specific PCIe Gen3 equalization parameters.
+**/
+typedef struct {
+ UINT8 Cm; ///< Coefficient C-1
+ UINT8 Cp; ///< Coefficient C+1
+ UINT8 PegGen3RootPortPreset; ///< <b>(Test)</b> Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
+ UINT8 PegGen3EndPointPreset; ///< <b>(Test)</b> Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+ UINT8 PegGen3EndPointHint; ///< <b>(Test)</b> Hint value per lane for the PEG Gen3 End Point. Range: 0-6, 2 is default for each lane
+ UINT8 PegGen4RootPortPreset; ///< <b>(Test)</b> Used for programming PEG Gen4 preset values per lane. Range: 0-9, 8 is default for each lane
+ UINT8 PegGen4EndPointPreset; ///< <b>(Test)</b> Used for programming PEG Gen4 preset values per lane. Range: 0-9, 7 is default for each lane
+ UINT8 PegGen4EndPointHint; ///< <b>(Test)</b> Hint value per lane for the PEG Gen4 End Point. Range: 0-6, 2 is default for each lane
+} CPU_PCIE_EQ_LANE_PARAM;
+
+/**
+ The CPU_PCI_ROOT_PORT_CONFIG describe the feature and capability of each CPU PCIe root port.
+**/
+typedef struct {
+
+ UINT32 ExtSync : 1; ///< Indicate whether the extended synch is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 VcEnabled : 1; ///< Virtual Channel. 0: Disable; <b>1: Enable</b>
+ UINT32 MultiVcEnabled : 1; ///< Multiple Virtual Channel. 0: Disable; <b>1: Enable</b>
+ UINT32 PeerToPeer : 1; ///< Peer to Peer Mode. <b>0: Disable</b>; 1: Enable.
+ UINT32 RsvdBits0 : 28; ///< Reserved bits
+ /**
+ PCIe Gen4 Equalization Method
+ - HwEq (0x1) : Hardware Equalization (Default)
+ - StaticEq (0x2) : Static Equalization
+ **/
+ UINT8 Gen4EqPh3Method;
+ UINT8 FomsCp; ///< FOM Score Board Control Policy
+ UINT8 RsvdBytes0[2]; ///< Reserved bytes
+
+ //
+ // Gen3 Equalization settings
+ //
+ UINT32 Gen3Uptp : 4; ///< <b>(Test)</b> Upstream Port Transmitter Preset used during Gen3 Link Equalization. Used for all lanes. Default is <b>7</b>.
+ UINT32 Gen3Dptp : 4; ///< <b>(Test)</b> Downstream Port Transmiter Preset used during Gen3 Link Equalization. Used for all lanes. Default is <b>7</b>.
+ //
+ // Gen4 Equalization settings
+ //
+ UINT32 Gen4Uptp : 4; ///< <b>(Test)</b> Upstream Port Transmitter Preset used during Gen4 Link Equalization. Used for all lanes. Default is <b>7</b>.
+ UINT32 Gen4Dptp : 4; ///< <b>(Test)</b> Downstream Port Transmiter Preset used during Gen4 Link Equalization. Used for all lanes. Default is <b>7</b>.
+ //
+ // Gen5 Equalization settings
+ //
+ UINT32 Gen5Uptp : 4; ///< <b>(Test)</b> Upstream Port Transmitter Preset used during Gen5 Link Equalization. Used for all lanes. Default is <b>7</b>.
+ UINT32 Gen5Dptp : 4; ///< <b>(Test)</b> Downstream Port Transmiter Preset used during Gen5 Link Equalization. Used for all lanes. Default is <b>7</b>.
+ UINT32 RsvdBits1 : 8; ///< Reserved Bits
+
+ PCIE_ROOT_PORT_COMMON_CONFIG PcieRpCommonConfig; ///< <b>(Test)</b> Includes policies which are common to both SA and PCH RootPort
+
+} CPU_PCIE_ROOT_PORT_CONFIG;
+
+typedef struct {
+ UINT8 PcieGen3PresetCoeffSelection; ///<Gen3 Preset or Coefficient Selection
+ UINT8 PcieGen4PresetCoeffSelection; ///<Gen4 Preset or Coefficient Selection
+ UINT8 RsvdBytes0[2]; ///<Reserved bytes
+} CPU_PCIE_ROOT_PORT_CONFIG2;
+
+/**
+ The CPU_PCIE_CONFIG block describes the expected configuration of the CPU PCI Express controllers
+ <b>Revision 1< / b>:
+ -Initial version.
+ <b>Revision 2</b>:
+ - SlotSelection policy added
+ <b>Revision 3</b>
+ - Deprecate PegGen3ProgramStaticEq and PegGen4ProgramStaticEq
+ <b>Revision 4</b>:
+ - Deprecating SetSecuredRegisterLock
+ <b>Revision 5</b>:
+ - Adding Serl
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ ///
+ /// These members describe the configuration of each SA PCIe root port.
+ ///
+ CPU_PCIE_ROOT_PORT_CONFIG RootPort[CPU_PCIE_MAX_ROOT_PORTS];
+ ///
+ /// Gen3 Equalization settings for physical PCIe lane, index 0 represents PCIe lane 1, etc.
+ /// Corresponding entries are used when root port EqPh3Method is PchPcieEqStaticCoeff (default).
+ ///
+ CPU_PCIE_EQ_LANE_PARAM EqPh3LaneParam[SA_PEG_MAX_LANE];
+ ///
+ /// List of coefficients used during equalization (applicable to both software and hardware EQ)
+ ///
+ PCIE_EQ_PARAM HwEqGen4CoeffList[PCIE_HWEQ_COEFFS_MAX]; // Deprecated Policy
+
+ PCIE_COMMON_CONFIG PcieCommonConfig; /// < <b>(Test)</b> Includes policies which are common to both SA and PCH PCIe
+
+ UINT32 FiaProgramming : 1; /// < Skip Fia Configuration and lock if enable
+ ///
+ /// This member describes whether the PCI Express Clock Gating for each root port
+ /// is enabled by platform modules. <b>0: Disable</b>; 1: Enable.
+ ///
+ UINT32 ClockGating : 1;
+ ///
+ /// This member describes whether the PCI Express Power Gating for each root port
+ /// is enabled by platform modules. <b>0: Disable</b>; 1: Enable.
+ ///
+ UINT32 PowerGating : 1;
+ // Deprecated Policy
+ /**
+ <b>(Test)</b> Program PEG Gen3 EQ Phase1 Static Presets
+ - Disabled (0x0) : Disable EQ Phase1 Static Presets Programming
+ - <b>Enabled</b> (0x1) : Enable EQ Phase1 Static Presets Programming (Default)
+ **/
+ UINT32 PegGen3ProgramStaticEq : 1;
+
+ // Deprecated Policy
+ /**
+ <b>(Test)</b> Program PEG Gen4 EQ Phase1 Static Presets
+ - Disabled (0x0) : Disable EQ Phase1 Static Presets Programming
+ - <b>Enabled</b> (0x1) : Enable EQ Phase1 Static Presets Programming (Default)
+ **/
+ UINT32 PegGen4ProgramStaticEq : 1;
+ /**
+ <b>(Test)</b> Cpu Pcie Secure Register Lock
+ - Disabled (0x0)
+ - <b>Enabled</b> (0x1)
+ **/
+ UINT32 SetSecuredRegisterLock : 1; // Deprecated Policy
+ ///
+ /// This member allows to select between the PCI Express M2 or CEMx4 slot <b>1: PCIe M2</b>; 0: CEMx4 slot.
+ ///
+ UINT32 SlotSelection : 1;
+ ///
+ /// Set/Clear Serl(Secure Equalization Register Lock)
+ ///
+ UINT32 Serl : 1;
+
+ UINT32 RsvdBits0 : 24;
+
+ /**
+ PCIe device override table
+ The PCIe device table is being used to override PCIe device ASPM settings.
+ This is a pointer points to a 32bit address. And it's only used in PostMem phase.
+ Please refer to PCH_PCIE_DEVICE_OVERRIDE structure for the table.
+ Last entry VendorId must be 0.
+ The prototype of this policy is:
+ CPU_PCIE_DEVICE_OVERRIDE *PcieDeviceOverrideTablePtr;
+ **/
+ UINT32 PcieDeviceOverrideTablePtr;
+ CPU_PCIE_ROOT_PORT_CONFIG2 RootPort2[CPU_PCIE_MAX_ROOT_PORTS];
+ PCIE_COMMON_CONFIG2 PcieCommonConfig2;
+} CPU_PCIE_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _CPU_PCIE_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Dci/DciConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Dci/DciConfig.h
new file mode 100644
index 0000000000..445642da1f
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Dci/DciConfig.h
@@ -0,0 +1,72 @@
+/** @file
+ Dci policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _DCI_CONFIG_H_
+#define _DCI_CONFIG_H_
+
+#define DCI_PREMEM_CONFIG_REVISION 2
+extern EFI_GUID gDciPreMemConfigGuid;
+
+#pragma pack (push,1)
+
+typedef enum {
+ DciDbcDisabled = 0x0,
+ DciDbcUsb2 = 0x1,
+ DciDbcUsb3 = 0x2,
+ DciDbcBoth = 0x3,
+ DciDbcNoChange = 0x4,
+ DciDbcMax
+} DCI_DBC_MODE;
+
+typedef enum {
+ Usb3TcDbgDisabled = 0x0,
+ Usb3TcDbgEnabled = 0x1,
+ Usb3TcDbgNoChange = 0x2,
+ Usb3TcDbgMax
+} DCI_USB3_TYPE_C_DEBUG_MODE;
+
+/**
+ The PCH_DCI_PREMEM_CONFIG block describes policies related to Direct Connection Interface (DCI)
+
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Added DciModphyPg
+ - change to use data in byte unit rather than bit-field
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ DCI enable.
+ Determine if to enable DCI debug from host.
+ <b>0:Disabled</b>; 1:Enabled
+ **/
+ UINT8 DciEn;
+ /**
+ USB DbC enable mode.
+ Disabled: Clear both USB2/3DBCEN; USB2: Set USB2DBCEN; USB3: Set USB3DBCEN; Both: Set both USB2/3DBCEN; No Change: Comply with HW value
+ Refer to definition of DCI_USB_DBC_MODE for supported settings.
+ 0:Disabled; 1:USB2; 2:USB3; 3:Both; <b>4:No Change</b>
+ **/
+ UINT8 DciDbcMode;
+ /**
+ Enable Modphy power gate when DCI is enable. It must be disabled for 4-wire DCI OOB. Set default to HW default : Disabled
+ <b>0:Disabled</b>; 1:Enabled
+ **/
+ UINT8 DciModphyPg;
+ /**
+ USB3 Type-C UFP2DFP kenel / platform debug support. No change will do nothing to UFP2DFP configuration.
+ When enabled, USB3 Type C UFP (upstream-facing port) may switch to DFP (downstream-facing port) for first connection.
+ It must be enabled for USB3 kernel(kernel mode debug) and platform debug(DFx, DMA, Trace) over UFP Type-C receptacle.
+ Refer to definition of DCI_USB_TYPE_C_DEBUG_MODE for supported settings.
+ 0:Disabled; 1:Enabled; <b>2:No Change</b>
+ **/
+ UINT8 DciUsb3TypecUfpDbg;
+} PCH_DCI_PREMEM_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _DCI_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Espi/EspiConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Espi/EspiConfig.h
new file mode 100644
index 0000000000..260b582702
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Espi/EspiConfig.h
@@ -0,0 +1,61 @@
+/** @file
+ Espi policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _ESPI_CONFIG_H_
+#define _ESPI_CONFIG_H_
+
+#define ESPI_CONFIG_REVISION 2
+extern EFI_GUID gEspiConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This structure contains the policies which are related to ESPI.
+
+ <b>Revision 1</b>:
+ - Initial revision
+ <b>Revision 2</b>:
+ - Added LockLinkConfiguration field to config block
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ LPC (eSPI) Memory Range Decode Enable. When TRUE, then the range
+ specified in PCLGMR[31:16] is enabled for decoding to LPC (eSPI).
+ <b>0: FALSE</b>, 1: TRUE
+ **/
+ UINT32 LgmrEnable : 1;
+ /**
+ eSPI Master and Slave BME settings.
+ When TRUE, then the BME bit enabled in eSPI Master and Slave.
+ 0: FALSE, <b>1: TRUE </b>
+ **/
+ UINT32 BmeMasterSlaveEnabled : 1;
+ /**
+ Master HOST_C10 (Virtual Wire) to Slave Enable (VWHC10OE)
+ <b>0b: Disable HOST_C10 reporting (HOST_C10 indication from PMC is ignored)</b>
+ 1b: Enable HOST_C10 reporting to Slave via eSPI Virtual Wire (upon receiving a HOST_C10 indication from PMC)
+ **/
+ UINT32 HostC10ReportEnable : 1;
+ /**
+ eSPI Link Configuration Lock (SBLCL)
+ If set to TRUE then communication through SET_CONFIG/GET_CONFIG
+ to eSPI slaves addresses from range 0x0 - 0x7FF
+ <b>1: TRUE</b>, 0: FALSE
+ **/
+ UINT32 LockLinkConfiguration : 1;
+ /**
+ Hardware Autonomous Enable (HAE)
+ If set to TRUE, then the IP may request a PG whenever it is idle
+ **/
+ UINT32 EspiPmHAE : 1;
+ UINT32 RsvdBits : 27; ///< Reserved bits
+} PCH_ESPI_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _ESPI_CONFIG_H_
+
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h
new file mode 100644
index 0000000000..0df2755280
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h
@@ -0,0 +1,170 @@
+/** @file
+ PCH FIVR policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _FIVR_CONFIG_H_
+#define _FIVR_CONFIG_H_
+
+#define FIVR_CONFIG_REVISION 1
+extern EFI_GUID gFivrConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ Rail support in S0ix and Sx
+ Settings other than FivrRailDisabled can be OR'ed
+**/
+typedef enum {
+ FivrRailDisabled = 0,
+ FivrRailInS0i1S0i2 = BIT0,
+ FivrRailInS0i3 = BIT1,
+ FivrRailInS3 = BIT2,
+ FivrRailInS4 = BIT3,
+ FivrRailInS5 = BIT4,
+ FivrRailInS0ix = FivrRailInS0i1S0i2 | FivrRailInS0i3,
+ FivrRailInSx = FivrRailInS3 | FivrRailInS4 | FivrRailInS5,
+ FivrRailAlwaysOn = FivrRailInS0ix | FivrRailInSx
+} FIVR_RAIL_SX_STATE;
+
+typedef enum {
+ FivrRetentionActive = BIT0,
+ FivrNormActive = BIT1,
+ FivrMinActive = BIT2,
+ FivrMinRetention = BIT3
+} FIVR_RAIL_SUPPORTED_VOLTAGE;
+
+/**
+ Structure for V1p05/Vnn VR rail configuration
+**/
+typedef struct {
+ /**
+ Mask to enable the usage of external VR rail in specific S0ix or Sx states
+ Use values from FIVR_RAIL_SX_STATE
+ The default is <b>FivrRailDisabled</b>.
+ **/
+ UINT32 EnabledStates : 5;
+
+ /**
+ VR rail voltage value that will be used in S0i2/S0i3 states.
+ This value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
+ The default for Vnn is set to <b>420 - 1050 mV</b>.
+ **/
+ UINT32 Voltage : 11;
+ /**
+ @deprecated
+ THIS POLICY IS DEPRECATED, PLEASE USE IccMaximum INSTEAD
+ VR rail Icc Max Value
+ Granularity of this setting is 1mA and maximal possible value is 500mA
+ The default is <b> 0mA </b>.
+ **/
+ UINT32 IccMax : 8;
+
+ /**
+ This register holds the control hold off values to be used when
+ changing the rail control for external bypass value in us
+ **/
+ UINT32 CtrlRampTmr : 8;
+
+ /**
+ Mask to set the supported configuration in VR rail.
+ Use values from FIVR_RAIL_SUPPORTED_VOLTAGE
+ **/
+ UINT32 SupportedVoltageStates : 4;
+
+ /**
+ VR rail Icc Maximum Value
+ Granularity of this setting is 1mA and maximal possible value is 500mA
+ The default is <b> 0mA </b>.
+ **/
+ UINT32 IccMaximum : 16;
+
+ UINT32 RsvdBits1 : 12;
+
+} FIVR_EXT_RAIL_CONFIG;
+
+
+/**
+ Structure for VCCIN_AUX voltage rail configuration
+**/
+typedef struct {
+ /**
+ Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage.
+ Voltage transition time required by motherboard voltage regulator when PCH changes
+ the VCCIN_AUX regulator set point from the low current mode voltage and high current mode voltage.
+ This field has 1us resolution.
+ When value is 0 PCH will not transition VCCIN_AUX to low current mode voltage.
+ The default is <b> 0xC </b>.
+ **/
+ UINT8 LowToHighCurModeVolTranTime;
+
+ /**
+ Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage.
+ Voltage transition time required by motherboard voltage regulator when PCH changes
+ the VCCIN_AUX regulator set point from the retention mode voltage to high current mode voltage.
+ This field has 1us resolution.
+ When value is 0 PCH will not transition VCCIN_AUX to retention voltage.
+ The default is <b> 0x36 </b>.
+ **/
+ UINT8 RetToHighCurModeVolTranTime;
+
+ /**
+ Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage.
+ Voltage transition time required by motherboard voltage regulator when PCH changes
+ the VCCIN_AUX regulator set point from the retention mode voltage to low current mode voltage.
+ This field has 1us resolution.
+ When value is 0 PCH will not transition VCCIN_AUX to retention voltage.
+ The default is <b> 0x2B </b>.
+ **/
+ UINT8 RetToLowCurModeVolTranTime;
+ UINT8 RsvdByte1;
+ /**
+ Transition time in microseconds from Off (0V) to High Current Mode Voltage.
+ Voltage transition time required by motherboard voltage regulator when PCH changes
+ the VCCIN_AUX regulator set point from 0V to the high current mode voltage.
+ This field has 1us resolution.
+ 0 = Transition to 0V is disabled
+ Setting this field to 0 sets VCCIN_AUX as a fixed rail that stays on
+ in all S0 & Sx power states after initial start up on G3 exit
+ The default is <b> 0x96 </b>.
+ **/
+ UINT32 OffToHighCurModeVolTranTime : 11;
+ UINT32 RsvdBits1 : 21;
+} FIVR_VCCIN_AUX_CONFIG;
+
+/**
+ The PCH_FIVR_CONFIG block describes FIVR settings.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ External V1P05 VR rail configuration.
+ **/
+ FIVR_EXT_RAIL_CONFIG ExtV1p05Rail;
+ /**
+ External Vnn VR rail configuration.
+ **/
+ FIVR_EXT_RAIL_CONFIG ExtVnnRail;
+ /**
+ Additional External Vnn VR rail configuration that will get applied
+ in Sx entry SMI callback. Required only if External Vnn VR
+ needs different settings for Sx than those specified in ExtVnnRail.
+ **/
+ FIVR_EXT_RAIL_CONFIG ExtVnnRailSx;
+ /**
+ VCCIN_AUX voltage rail configuration.
+ **/
+ FIVR_VCCIN_AUX_CONFIG VccinAux;
+
+ /**
+ Enable/Disable FIVR Dynamic Power Management
+ Default is <b> 1 </b>.
+ **/
+ UINT32 FivrDynPm : 1;
+ UINT32 RsvdBits2 : 31;
+} PCH_FIVR_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _FIVR_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gbe/GbeConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gbe/GbeConfig.h
new file mode 100644
index 0000000000..cb9411f9e8
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gbe/GbeConfig.h
@@ -0,0 +1,33 @@
+/** @file
+ Gigabit Ethernet policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _GBE_CONFIG_H_
+#define _GBE_CONFIG_H_
+
+#define GBE_CONFIG_REVISION 1
+extern EFI_GUID gGbeConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ PCH intergrated GBE controller configuration settings.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ Determines if enable PCH internal GBE, 0: Disable; <b>1: Enable</b>.
+ When Enable is changed (from disabled to enabled or from enabled to disabled),
+ it needs to set LAN Disable regsiter, which might be locked by FDSWL register.
+ So it's recommendated to issue a global reset when changing the status for PCH Internal LAN.
+ **/
+ UINT32 Enable : 1;
+ UINT32 LtrEnable : 1; ///< <b>0: Disable</b>; 1: Enable LTR capabilty of PCH internal LAN.
+ UINT32 RsvdBits0 : 30; ///< Reserved bits
+} GBE_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _GBE_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gna/GnaConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gna/GnaConfig.h
new file mode 100644
index 0000000000..87649253c6
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gna/GnaConfig.h
@@ -0,0 +1,31 @@
+/** @file
+ Policy definition for GNA Config Block
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _GNA_CONFIG_H_
+#define _GNA_CONFIG_H_
+#pragma pack(push, 1)
+
+#define GNA_CONFIG_REVISION 1
+/**
+ GNA config block for configuring GNA.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28:0
+ This policy enables the GNA Device (SA Device 8) if supported.
+ If FALSE, all other policies in this config block will be ignored.
+ <b>1=TRUE</b>;
+ 0=FALSE.
+ **/
+ UINT32 GnaEnable : 1;
+ UINT32 RsvdBits0 : 31; ///< Offset 28:1 :Reserved for future use
+} GNA_CONFIG;
+#pragma pack(pop)
+
+#endif // _GNA_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h
new file mode 100644
index 0000000000..1a724f14da
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h
@@ -0,0 +1,37 @@
+/** @file
+ GPIO device policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _GPIO_DEV_CONFIG_H_
+#define _GPIO_DEV_CONFIG_H_
+
+extern EFI_GUID gGpioDxeConfigGuid;
+
+#define GPIO_DXE_CONFIG_REVISION 1
+
+#pragma pack (push,1)
+
+/**
+ This structure contains the DXE policies which are related to GPIO device.
+
+ <b>Revision 1:</b>
+ - Inital version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ If GPIO ACPI device is not used by OS it can be hidden. In such case
+ no other device exposed to the system can reference GPIO device in one
+ of its resources through GpioIo(..) or GpioInt(..) ACPI descriptors.
+ <b>0: Disable</b>; 1: Enable
+ **/
+ UINT32 HideGpioAcpiDevice : 1;
+ UINT32 RsvdBits : 31; ///< Reserved bits
+
+} GPIO_DXE_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _GPIO_DEV_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h
new file mode 100644
index 0000000000..c3b134b830
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h
@@ -0,0 +1,211 @@
+/** @file
+ Policy definition for Internal Graphics Config Block.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _GRAPHICS_CONFIG_H_
+#define _GRAPHICS_CONFIG_H_
+#pragma pack(push, 1)
+
+#define GRAPHICS_PEI_PREMEM_CONFIG_REVISION 3
+#define GRAPHICS_PEI_CONFIG_REVISION 7
+#define GRAPHICS_DXE_CONFIG_REVISION 1
+
+#define DDI_DEVICE_NUMBER 4
+#define MAX_BCLM_ENTRIES 20
+
+
+//
+// DDI defines
+//
+typedef enum {
+ DdiDisable = 0x00,
+ DdiDdcEnable = 0x01,
+} DDI_DDC_TBT_VAL;
+
+typedef enum {
+ DdiHpdDisable = 0x00,
+ DdiHpdEnable = 0x01,
+} DDI_HPD_VAL;
+
+typedef enum {
+ DdiPortDisabled = 0x00,
+ DdiPortEdp = 0x01,
+ DdiPortMipiDsi = 0x02,
+} DDI_PORT_SETTINGS;
+
+/**
+ This structure configures the Native GPIOs for DDI port per VBT settings.
+**/
+typedef struct {
+ UINT8 DdiPortAConfig; /// The Configuration of DDI port A, this settings must match VBT's settings. DdiPortDisabled - No LFP is connected on DdiPortA, <b>DdiPortEdp - Set DdiPortA to eDP</b>, DdiPortMipiDsi - Set DdiPortA to MIPI DSI
+ UINT8 DdiPortBConfig; /// The Configuration of DDI port B, this settings must match VBT's settings. DdiPortDisabled - No LFP is connected on DdiPortB, <b>DdiPortEdp - Set DdiPortB to eDP</b>, DdiPortMipiDsi - Set DdiPortB to MIPI DSI
+ UINT8 DdiPortAHpd; /// The HPD setting of DDI Port A, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPortBHpd; /// The HPD setting of DDI Port B, this settings must match VBT's settings. DdiHpdDisable - Disable HPD, <b>DdiHpdEnable - Enable HPD</b>
+ UINT8 DdiPortCHpd; /// The HPD setting of DDI Port C, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPort1Hpd; /// The HPD setting of DDI Port 1, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPort2Hpd; /// The HPD setting of DDI Port 2, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPort3Hpd; /// The HPD setting of DDI Port 3, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPort4Hpd; /// The HPD setting of DDI Port 4, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPortADdc; /// The DDC setting of DDI Port A, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+ UINT8 DdiPortBDdc; /// The DDC setting of DDI Port B, this settings must match VBT's settings. DdiDisable - Disable DDC, <b>DdiDdcEnable - Enable DDC </b>
+ UINT8 DdiPortCDdc; /// The DDC setting of DDI Port C, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+ UINT8 DdiPort1Ddc; /// The DDC setting of DDI Port 1, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+ UINT8 DdiPort2Ddc; /// The DDC setting of DDI Port 2, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+ UINT8 DdiPort3Ddc; /// The DDC setting of DDI Port 3, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+ UINT8 DdiPort4Ddc; /// The DDC setting of DDI Port 4, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+} DDI_CONFIGURATION;
+
+/**
+ This Configuration block is to configure GT related PreMem data/variables.\n
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Added DfdRestoreEnable.
+ <b>Revision 3</b>:
+ - Added DdiConfiguration.
+ <b>Revision 4</b>:
+ - Added GmAdr64 and made GmAdr obselete
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28
+ Selection of the primary display device: 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, <b>3=AUTO</b>, 4=Switchable Graphics\n
+ When AUTO mode selected, the priority of display devices is: PCIe Graphics on PCH > PEG > iGFX
+ **/
+ UINT8 PrimaryDisplay;
+ /**
+ Offset 29
+ Intel Gfx Support. It controls enabling/disabling iGfx device.
+ When AUTO mode selected, iGFX will be turned off when external graphics detected.
+ If FALSE, all other polices can be ignored.
+ <b>2 = AUTO</b>;
+ 0 = FALSE;
+ 1 = TRUE.
+ **/
+ UINT8 InternalGraphics;
+ /**
+ Offset 30
+ Pre-allocated memory for iGFX\n
+ 0 = 0MB,1 or 247 = 32MB,\n
+ 2 = 64MB,\n
+ 240 = 4MB, 241 = 8MB,\n
+ 242 = 12MB, 243 = 16MB,\n
+ 244 = 20MB, 245 = 24MB,\n
+ 246 = 28MB, 248 = 36MB,\n
+ 249 = 40MB, 250 = 44MB,\n
+ 251 = 48MB, 252 = 52MB,\n
+ 253 = 56MB,<b> 254 = 60MB</b>,\n
+ <b>Note: enlarging pre-allocated memory for iGFX may need to reduce MmioSize because of 4GB boundary limitation</b>
+ **/
+ UINT16 IgdDvmt50PreAlloc;
+ UINT8 PanelPowerEnable; ///< Offset 32 :<b>(Test)</b> Control for enabling/disabling VDD force bit (Required only for early enabling of eDP panel): 0=FALSE, <b>1=TRUE</b>
+ UINT8 ApertureSize; ///< Offset 33 :Graphics aperture size (256MB is the recommended size as per BWG) : 0=128MB, <b>1=256MB</b>, 3=512MB, 7=1024MB, 15=2048MB.
+ UINT8 GtPsmiSupport; ///< Offset 34 :PSMI support On/Off: <b>0=FALSE</b>, 1=TRUE
+ UINT8 PsmiRegionSize; ///< Offset 35 :Psmi region size: <b>0=32MB</b>, 1=288MB, 2=544MB, 3=800MB, 4=1056MB
+ UINT8 DismSize; ///< Offset 36 :DiSM Size for 2LM Sku: <b>0=0GB</b>, 1=1GB, 2=2GB, 3=3GB, 4=4GB, 5=5GB, 6=6GB, 7=7GB
+ UINT8 DfdRestoreEnable; ///< Offset 37 :Display memory map programming for DFD Restore <b>0- Disable</b>, 1- Enable
+ UINT16 GttSize; ///< Offset 38 :Selection of iGFX GTT Memory size: 1=2MB, 2=4MB, <b>3=8MB</b>
+ /**
+ Offset 40
+ Temp Address of System Agent GTTMMADR: Default is <b>0xAF000000</b>
+ **/
+ UINT32 GttMmAdr;
+ UINT32 GmAdr; ///< Offset 44 Obsolete not to be used, use GmAdr64
+ DDI_CONFIGURATION DdiConfiguration; ///< Offset 48 DDI configuration, need to match with VBT settings.
+
+ UINT8 GtClosEnable; ///< Offset 50 Gt ClOS
+ UINT8 Rsvd0[7]; ///< Offset 51 Reserved for 4 bytes of alignment
+ /**
+ Offset 58
+ Temp Address of System Agent GMADR: Default is <b>0xB0000000</b>
+ **/
+ UINT64 GmAdr64;
+} GRAPHICS_PEI_PREMEM_CONFIG;
+
+/**
+ This configuration block is to configure IGD related variables used in PostMem PEI.
+ If Intel Gfx Device is not supported, all policies can be ignored.
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Removed DfdRestoreEnable.
+ <b>Revision 3</b>:
+ - Removed DdiConfiguration.
+ <b>Revision 4</b>:
+ - Added new CdClock frequency
+ <b>Revision 5</b>:
+ - Added GT Chicket bits
+ <b>Revision 6</b>:
+ - Added LogoPixelHeight and LogoPixelWidth
+ <b>Revision 7</b>:
+ - Added SkipFspGop
+
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT8 RenderStandby; ///< Offset 28 :<b>(Test)</b> This field is used to enable or disable RC6 (Render Standby): 0=FALSE, <b>1=TRUE</b>
+ UINT8 PmSupport; ///< Offset 29 :<b>(Test)</b> IGD PM Support TRUE/FALSE: 0=FALSE, <b>1=TRUE</b>
+ /**
+ Offset 30
+ CdClock Frequency select\n
+ <b>0xFF = Auto. Max CdClock freq based on Reference Clk</b> \n
+ 0: 192 Mhz, 1: 307.2 Mhz, 2: 312 Mhz, 3: 324 Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz
+
+ **/
+ UINT16 CdClock;
+ UINT8 PeiGraphicsPeimInit; ///< Offset 32 : This policy is used to enable/disable Intel Gfx PEIM.<b>0- Disable</b>, 1- Enable
+ UINT8 CdynmaxClampEnable; ///< Offset 33 : This policy is used to enable/disable CDynmax Clamping Feature (CCF) <b>1- Enable</b>, 0- Disable
+ UINT16 GtFreqMax; ///< Offset 34 : <b>(Test)</b> Max GT frequency limited by user in multiples of 50MHz: Default value which indicates normal frequency is <b>0xFF</b>
+ UINT8 DisableTurboGt; ///< Offset 36 : This policy is used to enable/disable DisableTurboGt <b>0- Disable</b>, 1- Enable
+ UINT8 SkipCdClockInit; ///< Offset 37 : SKip full CD clock initialization. <b>0- Disable</b>, 1- Enable
+ UINT8 RC1pFreqEnable; ///< Offset 38 : This policy is used to enable/disable RC1p Frequency. <b>0- Disable</b>, 1- Enable
+ UINT8 PavpEnable; ///< Offset 39 :IGD PAVP TRUE/FALSE: 0=FALSE, <b>1=TRUE</b>
+ VOID* LogoPtr; ///< Offset 40 Address of Intel Gfx PEIM Logo to be displayed
+ UINT32 LogoSize; ///< Offset 44 Intel Gfx PEIM Logo Size
+ VOID* GraphicsConfigPtr; ///< Offset 48 Address of the Graphics Configuration Table
+ VOID* BltBufferAddress; ///< Offset 52 Address of Blt buffer for PEIM Logo use
+ UINT32 BltBufferSize; ///< Offset 56 The size for Blt Buffer, calculating by PixelWidth * PixelHeight * 4 bytes (the size of EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+ UINT8 ProgramGtChickenBits; ///< Offset 60 Program GT Chicket bits in GTTMMADR + 0xD00 BITS [3:1].
+ UINT8 SkipFspGop; ///< Offset 61 This policy is used to skip PEIM GOP in FSP.<b>0- Use FSP provided GOP driver</b>, 1- Skip FSP provided GOP driver
+ UINT8 Rsvd1[2]; ///< Offset 62 Reserved for 4 bytes alignment
+ UINT32 LogoPixelHeight; ///< Offset 64 Address of LogoPixelHeight for PEIM Logo use
+ UINT32 LogoPixelWidth; ///< Offset 68 Address of LogoPixelWidth for PEIM Logo use
+} GRAPHICS_PEI_CONFIG;
+
+/**
+ This configuration block is to configure IGD related variables used in DXE.
+ If Intel Gfx Device is not supported or disabled, all policies will be ignored.
+ The data elements should be initialized by a Platform Module.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27: Config Block Header
+ UINT32 Size; ///< Offset 28 - 31: This field gives the size of the GOP VBT Data buffer
+ EFI_PHYSICAL_ADDRESS VbtAddress; ///< Offset 32 - 39: This field points to the GOP VBT data buffer
+ UINT8 PlatformConfig; ///< Offset 40: This field gives the Platform Configuration Information (0=Platform is S0ix Capable for ULT SKUs only, <b>1=Platform is not S0ix Capable</b>, 2=Force Platform is S0ix Capable for All SKUs)
+ UINT8 AlsEnable; ///< Offset 41: Ambient Light Sensor Enable: <b>0=Disable</b>, 2=Enable
+ UINT8 BacklightControlSupport; ///< Offset 42: Backlight Control Support: 0=PWM Inverted, <b>2=PWM Normal</b>
+ UINT8 IgdBootType; ///< Offset 43: IGD Boot Type CMOS option: <b>0=Default</b>, 0x01=CRT, 0x04=EFP, 0x08=LFP, 0x20=EFP3, 0x40=EFP2, 0x80=LFP2
+ UINT32 IuerStatusVal; ///< Offset 44 - 47: Offset 16 This field holds the current status of all the supported Ultrabook events (Intel(R) Ultrabook Event Status bits)
+ CHAR16 GopVersion[0x10]; ///< Offset 48 - 79:This field holds the GOP Driver Version. It is an Output Protocol and updated by the Silicon code
+ /**
+ Offset 80: IGD Panel Type CMOS option\n
+ <b>0=Default</b>, 1=640X480LVDS, 2=800X600LVDS, 3=1024X768LVDS, 4=1280X1024LVDS, 5=1400X1050LVDS1\n
+ 6=1400X1050LVDS2, 7=1600X1200LVDS, 8=1280X768LVDS, 9=1680X1050LVDS, 10=1920X1200LVDS, 13=1600X900LVDS\n
+ 14=1280X800LVDS, 15=1280X600LVDS, 16=2048X1536LVDS, 17=1366X768LVDS
+ **/
+ UINT8 IgdPanelType;
+ UINT8 IgdPanelScaling; ///< Offset 81: IGD Panel Scaling: <b>0=AUTO</b>, 1=OFF, 6=Force scaling
+ UINT8 IgdBlcConfig; ///< Offset 82: Backlight Control Support: 0=PWM Inverted, <b>2=PWM Normal</b>
+ UINT8 IgdDvmtMemSize; ///< Offset 83: IGD DVMT Memory Size: 1=128MB, <b>2=256MB</b>, 3=MAX
+ UINT8 GfxTurboIMON; ///< Offset 84: IMON Current Value: 14=Minimal, <b>31=Maximum</b>
+ UINT8 Reserved[3]; ///< Offset 85: Reserved for DWORD alignment.
+ UINT16 BCLM[MAX_BCLM_ENTRIES]; ///< Offset 88: IGD Backlight Brightness Level Duty cycle Mapping Table.
+} GRAPHICS_DXE_CONFIG;
+#pragma pack(pop)
+
+#endif // _GRAPHICS_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Hda/HdAudioConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Hda/HdAudioConfig.h
new file mode 100644
index 0000000000..a2e0a65e45
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Hda/HdAudioConfig.h
@@ -0,0 +1,227 @@
+/** @file
+ HDAUDIO policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _HDAUDIO_CONFIG_H_
+#define _HDAUDIO_CONFIG_H_
+
+#include <ConfigBlock.h>
+#include <PchLimits.h>
+
+#define HDAUDIO_PREMEM_CONFIG_REVISION 2
+#define HDAUDIO_CONFIG_REVISION 1
+#define HDAUDIO_DXE_CONFIG_REVISION 1
+
+extern EFI_GUID gHdAudioPreMemConfigGuid;
+extern EFI_GUID gHdAudioConfigGuid;
+extern EFI_GUID gHdAudioDxeConfigGuid;
+
+#pragma pack (push,1)
+
+///
+/// The PCH_HDAUDIO_CONFIG block describes the expected configuration of the Intel HD Audio feature.
+///
+
+#define HDAUDIO_VERB_TABLE_VIDDID(Vid,Did) (UINT32)((UINT16)Vid | ((UINT16)Did << 16))
+#define HDAUDIO_VERB_TABLE_RID_SDI_SIZE(Rid,Sdi,VerbTableSize) (UINT32)((UINT8)Rid | ((UINT8)Sdi << 8) | ((UINT16)VerbTableSize << 16))
+#define HDAUDIO_VERB_TABLE_CMD_SIZE(VerbTable) ((sizeof (VerbTable) - sizeof (HDA_VERB_TABLE_HEADER)) / (sizeof (UINT32)))
+
+///
+/// Use this macro to create HDAUDIO_VERB_TABLE and populate size automatically
+///
+#define HDAUDIO_VERB_TABLE_INIT(Vid,Did,Rid,Sdi,...) \
+{ \
+ { Vid, Did, Rid, Sdi, (sizeof((UINT32[]){__VA_ARGS__})/sizeof(UINT32)) }, \
+ { __VA_ARGS__ } \
+}
+
+
+/**
+ Azalia verb table header
+ Every verb table should contain this defined header and followed by azalia verb commands.
+**/
+typedef struct {
+ UINT16 VendorId; ///< Codec Vendor ID
+ UINT16 DeviceId; ///< Codec Device ID
+ UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision.
+ UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI.
+ UINT16 DataDwords; ///< Number of data DWORDs following the header.
+} HDA_VERB_TABLE_HEADER;
+
+#ifdef _MSC_VER
+//
+// Disable "zero-sized array in struct/union" extension warning.
+// Used for neater verb table definitions.
+//
+#pragma warning (push)
+#pragma warning (disable: 4200)
+#endif
+typedef struct {
+ HDA_VERB_TABLE_HEADER Header;
+ UINT32 Data[];
+} HDAUDIO_VERB_TABLE;
+#ifdef _MSC_VER
+#pragma warning (pop)
+#endif
+
+typedef struct {
+ UINT32 ClkA; ///< Pin mux configuration. Refer to GPIO_*_MUXING_DMIC*_CLKA_*
+ UINT32 ClkB; ///< Pin mux configuration. Refer to GPIO_*_MUXING_DMIC*_CLKB_*
+ UINT32 Data; ///< Pin mux configuration. Refer to GPIO_*_MUXING_DMIC*_DATA_*
+} HDA_DMIC_PIN_MUX;
+
+/**
+ HD Audio Link Policies
+**/
+typedef struct {
+ UINT32 Enable : 1; ///< HDA interface enable. When enabled related pins will be switched to native mode: <b>0: Disable</b>; 1: Enable.
+ UINT32 RsvdBits0 : 31;
+ UINT8 SdiEnable[PCH_MAX_HDA_SDI]; ///< HDA SDI signal enable. When enabled related SDI pins will be switched to appropriate native mode: <b>0: Disable</b>; 1: Enable
+ UINT8 Reserved[(4 - (PCH_MAX_HDA_SDI % 4)) % 4]; ///< Padding for SDI enable table.
+} HDA_LINK_HDA;
+
+/**
+ HD Audio DMIC Interface Policies
+**/
+typedef struct {
+ UINT32 Enable : 1; ///< HDA DMIC interface enable. When enabled related pins will be switched to native mode: <b>0: Disable</b>; 1: Enable.
+ UINT32 DmicClockSelect : 2; ///< DMIC link clock select: <b>0: Both</b>, 1: ClkA, 2: ClkB; default is "Both"
+ UINT32 RsvdBits0 : 29;
+ HDA_DMIC_PIN_MUX PinMux; ///< Pin mux configuration.
+} HDA_LINK_DMIC;
+
+/**
+ HD Audio SSP Interface Policies
+**/
+typedef struct {
+ UINT32 Enable : 1; ///< HDA SSP interface enable. When enabled related pins will be switched to native mode: <b>0: Disable</b>; 1: Enable.
+ UINT32 RsvdBits0 : 31;
+} HDA_LINK_SSP;
+
+/**
+ HD Audio SNDW Interface Policies
+**/
+typedef struct {
+ UINT32 Enable : 1; ///< HDA SNDW interface enable. When enabled related pins will be switched to native mode: <b>0: Disable</b>; 1: Enable.
+ UINT32 RsvdBits0 : 31;
+} HDA_LINK_SNDW;
+
+
+/**
+ This structure contains the policies which are related to HD Audio device (cAVS).
+
+ <b>Revision 1:</b>
+ - Inital version.
+
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ UINT32 Pme : 1; ///< Azalia wake-on-ring, <b>0: Disable</b>; 1: Enable
+ UINT32 CodecSxWakeCapability : 1; ///< Capability to detect wake initiated by a codec in Sx (eg by modem codec), <b>0: Disable</b>; 1: Enable
+ UINT32 HdAudioLinkFrequency : 4; ///< HDA-Link frequency (PCH_HDAUDIO_LINK_FREQUENCY enum): <b>2: 24MHz</b>, 1: 12MHz, 0: 6MHz
+ UINT32 RsvdBits0 : 26; ///< Reserved bits 0
+ /**
+ Number of the verb table entry defined in VerbTablePtr.
+ Each entry points to a verb table which contains HDAUDIO_VERB_TABLE structure and verb command blocks.
+ **/
+ UINT8 VerbTableEntryNum;
+ UINT8 Rsvd0[3]; ///< Reserved bytes, align to multiple 4
+ /**
+ Pointer to a verb table array.
+ This pointer points to 32bits address, and is only eligible and consumed in post mem phase.
+ Each entry points to a verb table which contains HDAUDIO_VERB_TABLE structure and verb command blocks.
+ The prototype of this is:
+ HDAUDIO_VERB_TABLE **VerbTablePtr;
+ **/
+ UINT32 VerbTablePtr;
+} HDAUDIO_CONFIG;
+
+/**
+ This structure contains the premem policies which are related to HD Audio device (cAVS).
+
+ <b>Revision 1:</b>
+ - Inital version.
+ <b>Revision 2:</b>
+ - Add DmicClockSelect
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ UINT32 Enable : 1; ///< Intel HD Audio (Azalia) enablement: 0: Disable, <b>1: Enable</b>
+ UINT32 DspEnable : 1; ///< DSP enablement: 0: Disable; <b>1: Enable</b>
+ UINT32 VcType : 1; ///< Virtual Channel Type Select: <b>0: VC0</b>, 1: VC1
+ /**
+ Universal Audio Architecture compliance for DSP enabled system:
+ <b>0: Not-UAA Compliant (Intel SST driver supported only)</b>,
+ 1: UAA Compliant (HDA Inbox driver or SST driver supported)
+ **/
+ UINT32 DspUaaCompliance : 1;
+ UINT32 IDispLinkFrequency : 4; ///< iDisp-Link frequency (PCH_HDAUDIO_LINK_FREQUENCY enum): <b>4: 96MHz</b>, 3: 48MHz
+ UINT32 IDispLinkTmode : 3; ///< iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): <b>0: 2T</b>, 1: 1T, 2: 4T, 3: 8T, 4: 16T
+ UINT32 IDispCodecDisconnect : 1; ///< iDisplay Audio Codec disconnection, <b>0: Not disconnected, enumerable</b>; 1: Disconnected SDI, not enumerable
+ UINT32 PowerGatingSupported : 1; ///< Power Gating supported: <b>0: Not supported</b>, 1: Supported
+ UINT32 RsvdBits : 19; ///< Reserved bits 0
+
+ /**
+ Audio Link Mode configuration bitmask.
+ Allows to configure enablement of the following interfaces: HDA-Link, DMIC, SSP, SoundWire.
+ **/
+
+ HDA_LINK_HDA AudioLinkHda; ///< HDA-Link enablement: 0: Disable; <b>1: Enable</b>.
+ /**
+ DMIC link enablement: 0: Disable; <b>1: Enable</b>.
+ DMIC0 LKF: Muxed with SNDW2/SNDW4.
+ **/
+ HDA_LINK_DMIC AudioLinkDmic [2];
+ /**
+ I2S/SSP link enablement: <b>0: Disable</b>; 1: Enable.
+ SSP0/1 LKF: Muxed with HDA.
+ @note Since the I2S/SSP2 pin set contains pads which are also used for CNVi purpose, enabling AudioLinkSsp2
+ is exclusive with CNVi is present.
+ **/
+ HDA_LINK_SSP AudioLinkSsp [PCH_MAX_HDA_SSP_LINK_NUM];
+ /**
+ SoundWire link enablement: <b>0: Disable</b>; 1: Enable.
+ SNDW2 LKF: Muxed with DMIC0/DMIC1.
+ SNDW3 LKF: Muxed with DMIC1.
+ SNDW4 LKF: Muxed with DMIC0.
+ **/
+ HDA_LINK_SNDW AudioLinkSndw [PCH_MAX_HDA_SNDW_LINK_NUM];
+
+
+ UINT16 ResetWaitTimer; ///< <b>(Test)</b> The delay timer after Azalia reset, the value is number of microseconds. Default is <b>600</b>.
+ UINT8 Rsvd0[2]; ///< Reserved bytes, align to multiple 4
+
+} HDAUDIO_PREMEM_CONFIG;
+
+typedef struct {
+ UINT32 AutonomousClockStop : 1; ///< SoundWire1 link autonomous clock stop capability: <b>0: Disable</b>; 1: Enable
+ UINT32 DataOnActiveIntervalSelect : 2; ///< SoundWire1 link data on active interval select 0: 3 clock periods; <b>1: 4 clock periods</b>; 2: 5 clock periods; 3: 6 clock periods
+ UINT32 DataOnDelaySelect : 1; ///< SoundWire1 link data on delay select 0: 2 clock periods; <b>1: 3 clock periods</b>
+ UINT32 RsvdBits1 : 28; ///< Reserved bits 1
+} HDAUDIO_SNDW_CONFIG;
+
+/**
+ This structure contains the DXE policies which are related to HD Audio device (cAVS).
+ <b>Revision 1:</b>
+ - Inital version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ SNDW configuration for exposed via SNDW ACPI tables:
+ **/
+ HDAUDIO_SNDW_CONFIG SndwConfig[PCH_MAX_HDA_SNDW_LINK_NUM];
+ /**
+ Bitmask of supported DSP features:
+ [BIT0] - WoV; [BIT1] - BT Sideband; [BIT2] - Codec VAD; [BIT5] - BT Intel HFP; [BIT6] - BT Intel A2DP
+ [BIT7] - DSP based speech pre-processing disabled; [BIT8] - 0: Intel WoV, 1: Windows Voice Activation
+ Default is <b>zero</b>.
+ **/
+ UINT32 DspFeatureMask;
+} HDAUDIO_DXE_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _HDAUDIO_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HostBridge/HostBridgeConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HostBridge/HostBridgeConfig.h
new file mode 100644
index 0000000000..67335be92e
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HostBridge/HostBridgeConfig.h
@@ -0,0 +1,62 @@
+/** @file
+ Configurations for HostBridge
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _HOST_BRIDGE_CONFIG_H_
+#define _HOST_BRIDGE_CONFIG_H_
+
+#include <ConfigBlock.h>
+
+#define HOST_BRIDGE_PREMEM_CONFIG_REVISION 1
+#define HOST_BRIDGE_PEI_CONFIG_REVISION 1
+
+extern EFI_GUID gHostBridgePeiPreMemConfigGuid;
+extern EFI_GUID gHostBridgePeiConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This configuration block describes HostBridge settings in PreMem.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT32 MchBar; ///< Offset 28 Address of System Agent MCHBAR: <b>0xFEDC0000(TGL)/0xFED10000(RKL)/0xFEA80000(JSL)<b>
+ UINT32 DmiBar; ///< Offset 32 Address of System Agent DMIBAR: <b>0xFEDA0000</b>
+ UINT32 EpBar; ///< Offset 36 Address of System Agent EPBAR: <b>0xFEDA1000</b>
+ UINT32 GdxcBar; ///< Offset 40 Address of System Agent GDXCBAR: <b>0xFED84000</b>
+ UINT32 RegBar; ///< Offset 44 Address of System Agent REGBAR: <b>0xFB000000</b>
+ UINT32 EdramBar; ///< Offset 48 Address of System Agent EDRAMBAR: <b>0xFED80000</b>
+ /**
+ Offset 52 :
+ Size of reserved MMIO space for PCI devices\n
+ <b>0=AUTO</b>, 512=512MB, 768=768MB, 1024=1024MB, 1280=1280MB, 1536=1536MB, 1792=1792MB,
+ 2048=2048MB, 2304=2304MB, 2560=2560MB, 2816=2816MB, 3072=3072MB\n
+ When AUTO mode selected, the MMIO size will be calculated by required MMIO size from PCIe devices detected.
+ **/
+ UINT32 MmioSize;
+ UINT32 MmioSizeAdjustment; ///< Offset 56 Increase (given positive value) or Decrease (given negative value) the Reserved MMIO size when Dynamic Tolud/AUTO mode enabled (in MBs): <b>0=no adjustment</b>
+ UINT8 EnableAbove4GBMmio; ///< Offset 60 Enable/disable above 4GB MMIO resource support: 0=Disable, <b>1=Enable</b>
+ UINT8 Reserved[3]; ///< Offset 61 Reserved for future use.
+} HOST_BRIDGE_PREMEM_CONFIG;
+
+
+/**
+ This configuration block describes HostBridge settings in Post-Mem.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT8 Device4Enable; ///< Offser 28 :This policy is used to control enable or disable System Agent Thermal device (0,4,0). <b>0=FALSE</b>, 1=TRUE.
+ UINT8 ChapDeviceEnable; ///< Offset 29 :<b>(Test)</b>This policy is used to control enable or disable System Agent Chap device (0,7,0). <b>0=FALSE</b>, 1=TRUE.
+ UINT8 SkipPamLock; ///< Offset 30 :To skip PAM register locking. @note It is still recommended to set PCI Config space B0: D0: F0: Offset 80h[0]=1 in platform code even Silicon code skipped this.\n <b>0=All PAM registers will be locked in Silicon code</b>, 1=Skip lock PAM registers in Silicon code.
+ UINT8 EdramTestMode; ///< Offset 28 :EDRAM Test Mode. For EDRAM stepping - 0- EDRAM SW Disable, 1- EDRAM SW Enable, <b> 2- EDRAM HW Mode</b>
+} HOST_BRIDGE_PEI_CONFIG;
+
+#pragma pack (pop)
+
+#endif
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HybridGraphics/HybridGraphicsConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HybridGraphics/HybridGraphicsConfig.h
new file mode 100644
index 0000000000..3f420aed48
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HybridGraphics/HybridGraphicsConfig.h
@@ -0,0 +1,66 @@
+/** @file
+ Hybrid Graphics policy definitions
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _HYBRID_GRAPHICS_CONFIG_H_
+#define _HYBRID_GRAPHICS_CONFIG_H_
+
+#define HYBRID_GRAPHICS_CONFIG_REVISION 2
+
+#pragma pack(push, 1)
+///
+/// GPIO Support
+///
+typedef enum {
+ NotSupported = 0,
+ PchGpio,
+ I2CGpio,
+} GPIO_SUPPORT;
+
+///
+/// CPU PCIe GPIO Data Structure
+///
+typedef struct {
+ UINT8 ExpanderNo; ///< Offset 0 Expander No For I2C based GPIO
+ BOOLEAN Active; ///< Offset 1 0=Active Low; 1=Active High
+ UINT8 Rsvd0[2]; ///< Offset 2 Reserved
+ UINT32 GpioNo; ///< Offset 4 GPIO pad
+} CPU_PCIE_GPIO_INFO;
+
+/**
+ CPU PCIE RTD3 GPIO Data Structure
+**/
+typedef struct {
+ CPU_PCIE_GPIO_INFO HoldRst; ///< Offset 0 This field contain PCIe HLD RESET GPIO value and level information
+ CPU_PCIE_GPIO_INFO PwrEnable; ///< Offset 8 This field contain PCIe PWR Enable GPIO value and level information
+ UINT32 WakeGpioNo; ///< Offset 16 This field contain PCIe RTD3 Device Wake GPIO Number
+ UINT8 GpioSupport; ///< Offset 20 Depends on board design the GPIO configuration may be different: <b>0=Not Supported</b>, 1=PCH Based, 2=I2C based
+ UINT8 Rsvd0[3]; ///< Offset 21
+} CPU_PCIE_RTD3_GPIO;
+
+/**
+ This Configuration block configures CPU PCI Express 0/1/2 RTD3 GPIOs & Root Port.
+ Hybrid Gfx uses the same GPIOs & Root port as PCI Express 0/1/2 RTD3.
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Add HgSlot Policy: PEG or PCH Slot Slection for Hybrid Graphics
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ CPU_PCIE_RTD3_GPIO CpuPcie0Rtd3Gpio; ///< Offset 28 RTD3 GPIOs used for PCIe
+ UINT8 RootPortIndex; ///< Offset 52 Root Port Index number used for HG
+ UINT8 HgMode; ///< Offset 53 HgMode: <b>0=Disabled</b>, 1=HG Muxed, 2=HG Muxless, 3=PEG
+ UINT16 HgSubSystemId; ///< Offset 54 Hybrid Graphics Subsystem ID: <b>2212</b>
+ UINT16 HgDelayAfterPwrEn; ///< Offset 56 Dgpu Delay after Power enable using Setup option: 0=Minimal, 1000=Maximum, <b>300=300 microseconds</b>
+ UINT16 HgDelayAfterHoldReset; ///< Offset 58 Dgpu Delay after Hold Reset using Setup option: 0=Minimal, 1000=Maximum, <b>100=100 microseconds</b>
+ CPU_PCIE_RTD3_GPIO CpuPcie1Rtd3Gpio; ///< Offset 60 RTD3 GPIOs used for PCIe
+ CPU_PCIE_RTD3_GPIO CpuPcie2Rtd3Gpio; ///< Offset 84 RTD3 GPIOs used for PCIe
+ CPU_PCIE_RTD3_GPIO CpuPcie3Rtd3Gpio; ///< Offset 108 RTD3 GPIOs used for PCIe
+ UINT8 HgSlot; ///< Offset 132 Slot selection between PEG and PCH
+ UINT8 Rsvd0[3]; ///< Offset 133 Reserved Bytes
+} HYBRID_GRAPHICS_CONFIG;
+#pragma pack(pop)
+#endif // _HYBRID_GRAPHICS_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HybridStorage/HybridStorageConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HybridStorage/HybridStorageConfig.h
new file mode 100644
index 0000000000..705fe43751
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/HybridStorage/HybridStorageConfig.h
@@ -0,0 +1,36 @@
+/** @file
+ Hybrid Storage policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _HYBRID_STORAGE_CONFIG_H_
+#define _HYBRID_STORAGE_CONFIG_H_
+
+#include <ConfigBlock.h>
+
+#define HYBRID_STORAGE_CONFIG_REVISION 1
+
+extern EFI_GUID gHybridStorageConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ The HYBRID_STORAGE_CONFIG block describes the expected configuration for Hybrid Storage device
+
+ <b>Revision 1</b>:
+ - Init version
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ Hybrid Storage Mode
+ <b>0: Disable</b>, 1: Enable Dynamic Configuration
+ **/
+ UINT8 HybridStorageMode;
+ UINT8 RsvdBytes[3];
+} HYBRID_STORAGE_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _HYBRID_STORAGE_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Ieh/IehConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Ieh/IehConfig.h
new file mode 100644
index 0000000000..a9275152f5
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Ieh/IehConfig.h
@@ -0,0 +1,34 @@
+/** @file
+ Integrated Error Handler policy.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _IEH_CONFIG_H_
+#define _IEH_CONFIG_H_
+
+#define IEH_MODE_BYPASS 0
+#define IEH_MODE_ENABLE 1
+
+#define IEH_CONFIG_REVISION 1
+extern EFI_GUID gIehConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ The IEH_CONFIG block describes the expected configuration of the PCH
+ Integrated Error Handler.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ IEH mode <b>0: Bypass Mode</b>; 1: Enable
+ **/
+ UINT32 Mode : 1;
+ UINT32 RsvdBits0 : 31; ///< Reserved bits
+} IEH_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _IEH_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Ish/IshConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Ish/IshConfig.h
new file mode 100644
index 0000000000..75a11e3052
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Ish/IshConfig.h
@@ -0,0 +1,134 @@
+/** @file
+ ISH policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _ISH_CONFIG_H_
+#define _ISH_CONFIG_H_
+
+#define ISH_PREMEM_CONFIG_REVISION 1
+#define ISH_CONFIG_REVISION 1
+extern EFI_GUID gIshPreMemConfigGuid;
+extern EFI_GUID gIshConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ ISH GPIO settings
+**/
+typedef struct {
+ /**
+ GPIO signals pin muxing settings. If signal can be enable only on a single pin
+ then this parameter should be set to 0. Refer to GPIO_*_MUXING_ISH_*x_* in GpioPins*.h
+ for supported settings on a given platform
+ **/
+ UINT32 PinMux; ///< GPIO Pin mux configuration. Refer to GPIO_*_MUXING_ISH_*x_MOSI_*
+ /**
+ GPIO Pads Internal Termination.
+ For more information please see Platform Design Guide.
+ Check GPIO_ELECTRICAL_CONFIG for reference
+ **/
+ UINT32 PadTermination;
+} ISH_GPIO_CONFIG;
+
+/**
+ SPI signals settings.
+**/
+typedef struct {
+ ISH_GPIO_CONFIG Mosi; ///< MOSI Pin configuration.
+ ISH_GPIO_CONFIG Miso; ///< MISO Pin configuration.
+ ISH_GPIO_CONFIG Clk; ///< CLK Pin configuration.
+ ISH_GPIO_CONFIG Cs[PCH_MAX_ISH_SPI_CS_PINS]; ///< CS Pin configuration.
+} ISH_SPI_PIN_CONFIG;
+
+
+/**
+ UART signals settings.
+**/
+typedef struct {
+ ISH_GPIO_CONFIG Rx; ///< RXD Pin configuration.
+ ISH_GPIO_CONFIG Tx; ///< TXD Pin configuration.
+ ISH_GPIO_CONFIG Rts; ///< RTS Pin configuration.
+ ISH_GPIO_CONFIG Cts; ///< CTS Pin configuration.
+} ISH_UART_PIN_CONFIG;
+
+
+/**
+ I2C signals settings.
+**/
+typedef struct {
+ ISH_GPIO_CONFIG Sda; ///< SDA Pin configuration.
+ ISH_GPIO_CONFIG Scl; ///< SCL Pin configuration.
+} ISH_I2C_PIN_CONFIG;
+
+
+/**
+ Struct contains GPIO pins assigned and signal settings of SPI
+**/
+typedef struct {
+ UINT8 Enable; ///< ISH SPI GPIO pins assigned: <b>0: False</b> 1: True
+ UINT8 CsEnable[PCH_MAX_ISH_SPI_CS_PINS]; ///< ISH SPI CS pins assigned: <b>0: False</b> 1: True
+ UINT16 RsvdField0; ///< Reserved field
+ ISH_SPI_PIN_CONFIG PinConfig;
+} ISH_SPI;
+
+
+/**
+ Struct contains GPIO pins assigned and signal settings of UART
+**/
+typedef struct {
+ UINT32 Enable : 1; ///< ISH UART GPIO pins assigned: <b>0: False</b> 1: True
+ UINT32 RsvdBits0 : 31; ///< Reserved Bits
+ ISH_UART_PIN_CONFIG PinConfig;
+} ISH_UART;
+
+/**
+ Struct contains GPIO pins assigned and signal settings of I2C
+**/
+typedef struct {
+ UINT32 Enable : 1; ///< ISH I2C GPIO pins assigned: <b>0: False</b> 1: True
+ UINT32 RsvdBits0 : 31; ///< Reserved Bits
+ ISH_I2C_PIN_CONFIG PinConfig;
+} ISH_I2C;
+
+/**
+ Struct contains GPIO pins assigned and signal settings of GP
+**/
+typedef struct {
+ UINT32 Enable : 1; ///< ISH GP GPIO pins assigned: <b>0: False</b> 1: True
+ UINT32 RsvdBits0 : 31; ///< Reserved Bits
+ ISH_GPIO_CONFIG PinConfig;
+} ISH_GP;
+
+///
+/// The ISH_CONFIG block describes Integrated Sensor Hub device.
+///
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ ISH_SPI Spi[PCH_MAX_ISH_SPI_CONTROLLERS];
+ ISH_UART Uart[PCH_MAX_ISH_UART_CONTROLLERS];
+ ISH_I2C I2c[PCH_MAX_ISH_I2C_CONTROLLERS];
+ ISH_GP Gp[PCH_MAX_ISH_GP_PINS];
+
+ UINT32 PdtUnlock : 1; ///< ISH PDT Unlock Msg: <b>0: False</b> 1: True
+ UINT32 RsvdBits0 : 31; ///< Reserved Bits
+
+} ISH_CONFIG;
+
+///
+/// Premem Policy for Integrated Sensor Hub device.
+///
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ ISH Controler 0: Disable; <b>1: Enable</b>.
+ For Desktop sku, the ISH POR should be disabled. <b> 0:Disable </b>.
+ **/
+ UINT32 Enable : 1;
+ UINT32 RsvdBits0 : 31; ///< Reserved Bits
+} ISH_PREMEM_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _ISH_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h
new file mode 100644
index 0000000000..7f6fa8675b
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h
@@ -0,0 +1,58 @@
+/** @file
+ Interrupt policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _INTERRUPT_CONFIG_H_
+#define _INTERRUPT_CONFIG_H_
+
+#define INTERRUPT_CONFIG_REVISION 1
+extern EFI_GUID gInterruptConfigGuid;
+
+#pragma pack (push,1)
+
+//
+// --------------------- Interrupts Config ------------------------------
+//
+typedef enum {
+ PchNoInt, ///< No Interrupt Pin
+ PchIntA,
+ PchIntB,
+ PchIntC,
+ PchIntD
+} PCH_INT_PIN;
+
+///
+/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device.
+///
+typedef struct {
+ UINT8 Device; ///< Device number
+ UINT8 Function; ///< Device function
+ UINT8 IntX; ///< Interrupt pin: INTA-INTD (see PCH_INT_PIN)
+ UINT8 Irq; ///< IRQ to be set for device.
+} PCH_DEVICE_INTERRUPT_CONFIG;
+
+#define PCH_MAX_DEVICE_INTERRUPT_CONFIG 128 ///< Number of all PCH devices
+#define PCH_MAX_PXRC_CONFIG 8 ///< Number of PXRC registers in ITSS
+#define PCH_MAX_ITSS_IPC_REGS 4 ///< Number of IPC registers in ITSS
+#define PCH_MAX_ITSS_IRQ_NUM 120 ///< Maximum number of IRQs
+
+
+///
+/// The PCH_INTERRUPT_CONFIG block describes interrupt settings for PCH.
+///
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ UINT8 NumOfDevIntConfig; ///< Number of entries in DevIntConfig table
+ UINT8 Rsvd0[3]; ///< Reserved bytes, align to multiple 4.
+ PCH_DEVICE_INTERRUPT_CONFIG DevIntConfig[PCH_MAX_DEVICE_INTERRUPT_CONFIG]; ///< Array which stores PCH devices interrupts settings
+ UINT8 GpioIrqRoute; ///< Interrupt routing for GPIO. Default is <b>14</b>.
+ UINT8 SciIrqSelect; ///< Interrupt select for SCI. Default is <b>9</b>.
+ UINT8 TcoIrqSelect; ///< Interrupt select for TCO. Default is <b>9</b>.
+ UINT8 TcoIrqEnable; ///< Enable IRQ generation for TCO. <b>0: Disable</b>; 1: Enable.
+} PCH_INTERRUPT_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _INTERRUPT_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Itss/IoApicConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Itss/IoApicConfig.h
new file mode 100644
index 0000000000..726a27f7a1
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Itss/IoApicConfig.h
@@ -0,0 +1,60 @@
+/** @file
+ IoApic policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _IOAPIC_CONFIG_H_
+#define _IOAPIC_CONFIG_H_
+
+#define IOAPIC_CONFIG_REVISION 1
+extern EFI_GUID gIoApicConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ The PCH_IOAPIC_CONFIG block describes the expected configuration of the PCH
+ IO APIC, it's optional and PCH code would ignore it if the BdfValid bit is
+ not TRUE. Bus:device:function fields will be programmed to the register
+ P2SB IBDF(P2SB PCI offset R6Ch-6Dh), it's using for the following purpose:
+ As the Requester ID when initiating Interrupt Messages to the processor.
+ As the Completer ID when responding to the reads targeting the IOxAPI's
+ Memory-Mapped I/O registers.
+ This field defaults to Bus 0: Device 31: Function 0 after reset. BIOS can
+ program this field to provide a unique Bus:Device:Function number for the
+ internal IOxAPIC.
+ The address resource range of IOAPIC must be reserved in E820 and ACPI as
+ system resource.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ UINT32 IoApicEntry24_119 : 1; ///< 0: Disable; <b>1: Enable</b> IOAPIC Entry 24-119
+ /**
+ Enable 8254 Static Clock Gating during early POST time. 0: Disable, <b>1: Enable</b>
+ Setting 8254CGE is required to support SLP_S0.
+ Enable this if 8254 timer is not used.
+ However, set 8254CGE=1 in POST time might fail to boot legacy OS using 8254 timer.
+ Make sure it is disabled to support legacy OS using 8254 timer.
+ @note:
+ For some OS environment that it needs to set 8254CGE in late state it should
+ set this policy to FALSE and use ItssSet8254ClockGateState (TRUE) in SMM later.
+ This is also required during S3 resume.
+ To avoid SMI requirement in S3 reusme path, it can enable the Enable8254ClockGatingOnS3
+ and RC will do 8254 CGE programming in PEI during S3 resume with BOOT_SAI.
+ **/
+ UINT32 Enable8254ClockGating : 1;
+ /**
+ Enable 8254 Static Clock Gating on S3 resume path. 0: Disable, <b>1: Enable</b>
+ This is only applicable when Enable8254ClockGating is disabled.
+ If Enable8254ClockGating is enabled, RC will do the 8254 CGE programming on
+ S3 resume path as well.
+ **/
+ UINT32 Enable8254ClockGatingOnS3 : 1;
+ UINT32 RsvdBits1 : 29; ///< Reserved bits
+ UINT8 IoApicId; ///< This member determines IOAPIC ID. Default is <b>0x02</b>.
+ UINT8 Rsvd0[3]; ///< Reserved bytes
+} PCH_IOAPIC_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _IOAPIC_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Me/MePeiConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Me/MePeiConfig.h
new file mode 100644
index 0000000000..82786501f0
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Me/MePeiConfig.h
@@ -0,0 +1,117 @@
+/** @file
+ ME config block for PEI phase
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _ME_PEI_CONFIG_H_
+#define _ME_PEI_CONFIG_H_
+
+#define ME_PEI_PREMEM_CONFIG_REVISION 2
+extern EFI_GUID gMePeiPreMemConfigGuid;
+
+#ifndef PLATFORM_POR
+#define PLATFORM_POR 0
+#endif
+#ifndef FORCE_ENABLE
+#define FORCE_ENABLE 1
+#endif
+#ifndef FORCE_DISABLE
+#define FORCE_DISABLE 2
+#endif
+
+#pragma pack (push,1)
+
+/**
+ ME Pei Pre-Memory Configuration Structure.
+
+ <b>Revision 1:</b>
+ - Initial version.
+ <b>Revision 2:</b>
+ - Add SkipCpuReplacementCheck Option.
+ <b>Revision 3:</b>
+ - Deprecate SendDidMsg.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ UINT32 HeciTimeouts : 1; ///< 0: Disable; <b>1: Enable</b> - HECI Send/Receive Timeouts.
+ /**
+ <b>(Test)</b>
+ <b>0: Disabled</b>
+ 1: ME DID init stat 0 - Success
+ 2: ME DID init stat 1 - No Memory in Channels
+ 3: ME DID init stat 2 - Memory Init Error
+ **/
+ UINT32 DidInitStat : 2;
+ /**
+ <b>(Test)</b>
+ <b>0: Set to 0 to enable polling for CPU replacement</b>
+ 1: Set to 1 will disable polling for CPU replacement
+ **/
+ UINT32 DisableCpuReplacedPolling : 1;
+ UINT32 SendDidMsg : 1; ///< <b>(Deprecated)</b> 0: Disable; <b>1: Enable</b> - Enable/Disable to send DID message.
+ /**
+ <b>(Test)</b>
+ <b>0: ME BIOS will check each messages before sending</b>
+ 1: ME BIOS always sends messages without checking
+ **/
+ UINT32 DisableMessageCheck : 1;
+ /**
+ <b>(Test)</b>
+ The SkipMbpHob policy determines whether ME BIOS Payload data will be requested during boot
+ in a MBP message. If set to 1, BIOS will send the MBP message with SkipMbp flag
+ set causing CSME to respond with MKHI header only and no MBP data
+ <b>0: ME BIOS will keep MBP and create HOB for MBP data</b>
+ 1: ME BIOS will skip MBP data
+ **/
+ UINT32 SkipMbpHob : 1;
+ UINT32 HeciCommunication2 : 1; ///< <b>(Test)</b> <b>0: Disable</b>; 1: Enable - Enable/Disable HECI2.
+ UINT32 KtDeviceEnable : 1; ///< <b>(Test)</b> 0: Disable; <b>1: Enable</b> - Enable/Disable Kt Device.
+ UINT32 SkipCpuReplacementCheck : 1; ///< <b>(Test)</b> <b>0: Disable</b>; 1: Enable - Enable/Disable to skip CPU replacement check.
+ UINT32 RsvdBits : 22; ///< Reserved for future use & Config block alignment
+ UINT32 Heci1BarAddress; ///< HECI1 BAR address.
+ UINT32 Heci2BarAddress; ///< HECI2 BAR address.
+ UINT32 Heci3BarAddress; ///< HECI3 BAR address.
+} ME_PEI_PREMEM_CONFIG;
+#pragma pack (pop)
+
+
+#define ME_PEI_CONFIG_REVISION 3
+extern EFI_GUID gMePeiConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ ME Pei Post-Memory Configuration Structure.
+
+ <b>Revision 1:</b>
+ - Initial version.
+ <b>Revision 2</b>:
+ - Deprecated Heci3Enabled.
+ <b>Revision 3</b>
+ - Added EnforceEDebugMode.
+**/
+
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+
+ UINT32 EndOfPostMessage : 2; ///< 0: Disabled; 1: Send in PEI; <b>2: Send in DXE</b> - Send EOP at specific phase.
+ UINT32 Heci3Enabled : 1; ///< @deprecated
+ UINT32 DisableD0I3SettingForHeci : 1; ///< <b>(Test)</b> <b>0: Disable</b>; 1: Enable - Enable/Disable D0i3 for HECI.
+ /**
+ Enable/Disable Me Unconfig On Rtc Clear. If enabled, BIOS will send MeUnconfigOnRtcClearDisable Msg with parameter 0.
+ It will cause ME to unconfig if RTC is cleared.
+ - 0: Disable
+ - <b>1: Enable</b>
+ - 2: Cmos is clear, status unkonwn
+ - 3: Reserved
+ **/
+ UINT32 MeUnconfigOnRtcClear : 2;
+ UINT32 MctpBroadcastCycle : 1; ///< <b>(Test)</b> <b>0: Disable</b>; 1: Enable - Program registers for MCTP Cycle.
+ UINT32 EnforceEDebugMode : 1; ///< <b>0: Disable</b>; 1: Enable - Enforces ME to enter Enhanced Debug Mode
+ UINT32 RsvdBits : 24; ///< Reserved for future use & Config block alignment
+} ME_PEI_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _ME_PEI_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h
new file mode 100644
index 0000000000..17c0a10eee
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h
@@ -0,0 +1,478 @@
+/** @file
+ Policy definition of Memory Config Block
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _MEMORY_CONFIG_H_
+#define _MEMORY_CONFIG_H_
+
+
+#pragma pack(push, 1)
+
+// MEMORY_CONFIG_REVISION 3 adds DDR5 PDA Enumeration training within MEMORY_CONFIGURATION
+// MEMORY_CONFIG_REVISION 4 adds LPDDR4 Command Mirroring within MEMORY_CONFIGURATION
+// MEMORY_CONFIG_REVISION 5 adds CpuBclkSpread option within MEMORY_CONFIGURATION
+// MEMORY_CONFIG_REVISION 6 adds McParity option within MEMORY_CONFIGURATION
+// MEMORY_CONFIG_REVISION 7 adds VddqVoltageOverride option within MEMORY_CONFIGURATION
+// MEMORY_CONFIG_REVISION 8 adds ExtendedBankHashing option within MEMORY_CONFIGURATION
+// MEMORY_CONFIG_REVISION 9 adds IbeccErrorInj option within MEMORY_CONFIGURATION
+#define MEMORY_CONFIG_REVISION 9
+///
+/// MEMORY_CONFIG interface definitions
+///
+#define MRC_MAX_RCOMP_TARGETS 5
+///
+/// Memory SubSystem Definitions
+///
+#define MEM_CFG_MAX_CONTROLLERS 2
+#define MEM_CFG_MAX_CHANNELS 4
+#define MEM_CFG_MAX_CHANNEL_SHARE_REGS 2
+#define MEM_CFG_MAX_DIMMS 2
+#define MEM_CFG_MAX_RANKS_PER_DIMM 2
+#define MEM_CFG_NUM_BYTES_MAPPED 2
+#define MEM_CFG_MAX_SPD_SIZE 1024
+#define MEM_CFG_MAX_SOCKETS (MEM_CFG_MAX_CONTROLLERS * MEM_CFG_MAX_CHANNELS * MEM_CFG_MAX_DIMMS)
+#define MEM_CFG_MAX_ROWS (MEM_CFG_MAX_RANKS_PER_DIMM * MEM_CFG_MAX_SOCKETS)
+#ifndef MEM_MAX_SAGV_POINTS
+#define MEM_MAX_SAGV_POINTS 4
+#endif
+#define MEM_MAX_IBECC_REGIONS 8
+///
+/// SMRAM Memory Range
+///
+#define PEI_MR_SMRAM_ABSEG_MASK 0x01
+#define PEI_MR_SMRAM_HSEG_MASK 0x02
+
+///
+/// SA SPD profile selections.
+///
+typedef enum {
+ Default, ///< 0, Default SPD
+ UserDefined, ///< 1, User Defined profile
+ XMPProfile1, ///< 2, XMP Profile 1
+ XMPProfile2, ///< 3, XMP Profile 2
+ XMPProfileMax = 0xFF ///< Ensures SA_SPD is UINT8
+} SA_SPD;
+
+///
+/// Define the boot modes used by the SPD read function.
+///
+typedef enum {
+ SpdCold, ///< Cold boot
+ SpdWarm, ///< Warm boot
+ SpdS3, ///< S3 resume
+ SpdFast, ///< Fast boot
+ SpdBootModeMax ///< Delimiter
+} SPD_BOOT_MODE;
+
+/**
+ SPD Data Buffer
+**/
+typedef struct {
+ UINT8 SpdData[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS][MEM_CFG_MAX_DIMMS][MEM_CFG_MAX_SPD_SIZE]; ///< SpdData
+//Next Field Offset 2048
+} SPD_DATA_BUFFER;
+
+/**
+ DqDqs Mapping
+**/
+typedef struct {
+ UINT8 DqsMapCpu2Dram[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS][MEM_CFG_NUM_BYTES_MAPPED]; ///< DqsMapCpu2Dram
+ UINT8 DqMapCpu2Dram[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS][MEM_CFG_NUM_BYTES_MAPPED][8]; ///< DqMapCpu2Dram
+//Next Field Offset 16
+} SA_MEMORY_DQDQS_MAPPING;
+
+/**
+ Rcomp Policies
+**/
+typedef struct {
+ UINT16 RcompResistor; ///< Offset 0: Reference RCOMP resistors on motherboard ~ 100 ohms
+ UINT16 RcompTarget[MRC_MAX_RCOMP_TARGETS]; ///< Offset 1: RCOMP target values for DqOdt, DqDrv, CmdDrv, CtlDrv, ClkDrv
+//Next Field Offset 16
+} SA_MEMORY_RCOMP;
+
+/**
+ SPD Offset Table
+**/
+typedef struct {
+ UINT16 Start; ///< Offset 0
+ UINT16 End; ///< Offset 2
+ UINT8 BootMode; ///< Offset 4
+ UINT8 Reserved3[3]; ///< Offset 5 Reserved for future use
+} SPD_OFFSET_TABLE;
+
+///
+/// SA memory address decode.
+///
+typedef struct
+{
+ UINT8 Controller; ///< Offset 0 Zero based Controller number
+ UINT8 Channel; ///< Offset 1 Zero based Channel number
+ UINT8 Dimm; ///< Offset 2 Zero based DIMM number
+ UINT8 Rank; ///< Offset 3 Zero based Rank number
+ UINT8 BankGroup; ///< Offset 4 Zero based Bank Group number
+ UINT8 Bank; ///< Offset 5 Zero based Bank number
+ UINT16 Cas; ///< Offset 6 Zero based CAS number
+ UINT32 Ras; ///< Offset 8 Zero based RAS number
+} SA_ADDRESS_DECODE;
+
+typedef UINT8 (EFIAPI * SA_IO_READ_8) (UINTN IoAddress); ///< CPU I/O port 8-bit read.
+typedef UINT16 (EFIAPI * SA_IO_READ_16) (UINTN IoAddress); ///< CPU I/O port 16-bit read.
+typedef UINT32 (EFIAPI * SA_IO_READ_32) (UINTN IoAddress); ///< CPU I/O port 32-bit read.
+typedef UINT8 (EFIAPI * SA_IO_WRITE_8) (UINTN IoAddress, UINT8 Value); ///< CPU I/O port 8-bit write.
+typedef UINT16 (EFIAPI * SA_IO_WRITE_16) (UINTN IoAddress, UINT16 Value); ///< CPU I/O port 16-bit write.
+typedef UINT32 (EFIAPI * SA_IO_WRITE_32) (UINTN IoAddress, UINT32 Value); ///< CPU I/O port 32-bit write.
+typedef UINT8 (EFIAPI * SA_MMIO_READ_8) (UINTN Address); ///< Memory Mapped I/O port 8-bit read.
+typedef UINT16 (EFIAPI * SA_MMIO_READ_16) (UINTN Address); ///< Memory Mapped I/O port 16-bit read.
+typedef UINT32 (EFIAPI * SA_MMIO_READ_32) (UINTN Address); ///< Memory Mapped I/O port 32-bit read.
+typedef UINT64 (EFIAPI * SA_MMIO_READ_64) (UINTN Address); ///< Memory Mapped I/O port 64-bit read.
+typedef UINT8 (EFIAPI * SA_MMIO_WRITE_8) (UINTN Address, UINT8 Value); ///< Memory Mapped I/O port 8-bit write.
+typedef UINT16 (EFIAPI * SA_MMIO_WRITE_16) (UINTN Address, UINT16 Value); ///< Memory Mapped I/O port 16-bit write.
+typedef UINT32 (EFIAPI * SA_MMIO_WRITE_32) (UINTN Address, UINT32 Value); ///< Memory Mapped I/O port 32-bit write.
+typedef UINT64 (EFIAPI * SA_MMIO_WRITE_64) (UINTN Address, UINT64 Value); ///< Memory Mapped I/O port 64-bit write.
+typedef UINT8 (EFIAPI * SA_SMBUS_READ_8) (UINTN Address, RETURN_STATUS *Status); ///< Smbus 8-bit read.
+typedef UINT16 (EFIAPI * SA_SMBUS_READ_16) (UINTN Address, RETURN_STATUS *Status); ///< Smbus 16-bit read.
+typedef UINT8 (EFIAPI * SA_SMBUS_WRITE_8) (UINTN Address, UINT8 Value, RETURN_STATUS *Status); ///< Smbus 8-bit write.
+typedef UINT16 (EFIAPI * SA_SMBUS_WRITE_16) (UINTN Address, UINT16 Value, RETURN_STATUS *Status); ///< Smbus 16-bit write.
+typedef UINT32 (EFIAPI * SA_GET_PCI_DEVICE_ADDRESS) (UINT8 Bus, UINT8 Device, UINT8 Function, UINT8 Offset); ///< Get PCI device address.
+typedef UINT32 (EFIAPI * SA_GET_PCIE_DEVICE_ADDRESS) (UINT8 Bus, UINT8 Device, UINT8 Function, UINT8 Offset); ///< Get PCI express device address.
+typedef VOID (EFIAPI * SA_GET_RTC_TIME) (UINT8 *Second, UINT8 *Minute, UINT8 *Hour, UINT8 *Day, UINT8 *Month, UINT16 *Year); ///< Get the current time value.
+typedef UINT64 (EFIAPI * SA_GET_CPU_TIME) (VOID); ///< The current CPU time in milliseconds.
+typedef VOID * (EFIAPI * SA_MEMORY_COPY) (VOID *Destination, CONST VOID *Source, UINTN NumBytes); ///< Perform byte copy operation.
+typedef VOID * (EFIAPI * SA_MEMORY_SET_BYTE) (VOID *Buffer, UINTN NumBytes, UINT8 Value); ///< Perform byte initialization operation.
+typedef VOID * (EFIAPI * SA_MEMORY_SET_WORD) (VOID *Buffer, UINTN NumWords, UINT16 Value); ///< Perform word initialization operation.
+typedef VOID * (EFIAPI * SA_MEMORY_SET_DWORD) (VOID *Buffer, UINTN NumDwords, UINT32 Value); ///< Perform dword initialization operation.
+typedef UINT64 (EFIAPI * SA_LEFT_SHIFT_64) (UINT64 Data, UINTN NumBits); ///< Left shift the 64-bit data value by specified number of bits.
+typedef UINT64 (EFIAPI * SA_RIGHT_SHIFT_64) (UINT64 Data, UINTN NumBits); ///< Right shift the 64-bit data value by specified number of bits.
+typedef UINT64 (EFIAPI * SA_MULT_U64_U32) (UINT64 Multiplicand, UINT32 Multiplier); ///< Multiply a 64-bit data value by a 32-bit data value.
+typedef UINT64 (EFIAPI * SA_DIV_U64_U64) (UINT64 Dividend, UINT64 Divisor, UINT64 *Remainder); ///< Divide a 64-bit data value by a 64-bit data value.
+typedef BOOLEAN (EFIAPI * SA_GET_SPD_DATA) (SPD_BOOT_MODE BootMode, UINT8 SpdAddress, UINT8 *Buffer, UINT8 *Ddr3Table, UINT32 Ddr3TableSize, UINT8 *Ddr4Table, UINT32 Ddr4TableSize, UINT8 *LpddrTable, UINT32 LpddrTableSize); ///< Read the SPD data over the SMBus, at the given SmBus SPD address and copy the data to the data structure.
+typedef UINT8 (EFIAPI * SA_GET_MC_ADDRESS_DECODE) (UINT64 Address, SA_ADDRESS_DECODE *DramAddress);
+typedef UINT8 (EFIAPI * SA_GET_MC_ADDRESS_ENCODE) (SA_ADDRESS_DECODE *DramAddress, UINT64 Address);
+typedef BOOLEAN (EFIAPI * SA_GET_RANDOM_NUMBER) (UINT32 *Rand); ///< Get the next random 32-bit number.
+typedef EFI_STATUS (EFIAPI * SA_CPU_MAILBOX_READ) (UINT32 Type, UINT32 Command, UINT32 *Value, UINT32 *Status); ///< Perform a CPU mailbox read.
+typedef EFI_STATUS (EFIAPI * SA_CPU_MAILBOX_WRITE) (UINT32 Type, UINT32 Command, UINT32 Value, UINT32 *Status); ///< Perform a CPU mailbox write.
+typedef UINT32 (EFIAPI * SA_GET_MEMORY_VDD) (VOID *GlobalData, UINT32 DefaultVdd); ///< Get the current memory voltage (VDD).
+typedef UINT32 (EFIAPI * SA_SET_MEMORY_VDD) (VOID *GlobalData, UINT32 DefaultVdd, UINT32 Value); ///< Set the memory voltage (VDD) to the given value.
+typedef UINT32 (EFIAPI * SA_CHECKPOINT) (VOID *GlobalData, UINT32 CheckPoint, VOID *Scratch); ///< Check point that is called at various points in the MRC.
+typedef VOID (EFIAPI * SA_DEBUG_HOOK) (VOID *GlobalData, UINT16 DisplayDebugNumber); ///< Typically used to display to the I/O port 80h.
+typedef UINT8 (EFIAPI * SA_CHANNEL_EXIST) (VOID *Outputs, UINT8 Channel); ///< Returns whether Channel is or is not present.
+typedef INT32 (EFIAPI * SA_PRINTF) (VOID *Debug, UINT32 Level, char *Format, ...); ///< Print to output stream/device.
+typedef VOID (EFIAPI * SA_DEBUG_PRINT) (VOID *String); ///< Output a string to the debug stream/device.
+typedef UINT32 (EFIAPI * SA_CHANGE_MARGIN) (VOID *GlobalData, UINT8 Param, INT32 Value0, INT32 Value1, UINT8 EnMultiCast, UINT8 Channel, UINT8 RankIn, UINT8 Byte, UINT8 BitIn, UINT8 UpdateMrcData, UINT8 SkipWait, UINT32 RegFileParam); ///< Change the margin.
+typedef UINT8 (EFIAPI * SA_SIGN_EXTEND) (UINT8 Value, UINT8 OldMsb, UINT8 NewMsb); ///< Sign extends OldMSB to NewMSB Bits (Eg: Bit 6 to Bit 7).
+typedef VOID (EFIAPI * SA_SHIFT_PI_COMMAND_TRAIN) (VOID *GlobalData, UINT8 Channel, UINT8 Iteration, UINT8 RankMask, UINT8 GroupMask, INT32 NewValue, UINT8 UpdateHost); ///< Move CMD/CTL/CLK/CKE PIs during training.
+typedef VOID (EFIAPI * SA_UPDATE_VREF) (VOID *GlobalData, UINT8 Channel, UINT8 RankMask, UINT16 DeviceMask, UINT8 VrefType, INT32 Offset, BOOLEAN UpdateMrcData, BOOLEAN PDAmode, BOOLEAN SkipWait); ///< Update the Vref value and wait until it is stable.
+typedef UINT8 (EFIAPI * SA_GET_RTC_CMOS) (UINT8 Location); ///< Get the current value of the specified RTC CMOS location.
+typedef UINT64 (EFIAPI * SA_MSR_READ_64) (UINT32 Location); ///< Get the current value of the specified MSR location.
+typedef UINT64 (EFIAPI * SA_MSR_WRITE_64) (UINT32 Location, UINT64 Data); ///< Set the current value of the specified MSR location.
+typedef VOID (EFIAPI * SA_MRC_RETURN_FROM_SMC) (VOID *GlobalData, UINT32 MrcStatus); ///< Hook function after returning from MrcStartMemoryConfiguration()
+typedef VOID (EFIAPI * SA_MRC_DRAM_RESET) (UINT32 PciEBaseAddress, UINT32 ResetValue); ///< Assert or deassert DRAM_RESET# pin; this is used in JEDEC Reset.
+typedef VOID (EFIAPI * SA_DELAY_NS) (VOID *GlobalData, UINT32 DelayNs); ///< Delay (stall) for the given amount of nanoseconds.
+typedef VOID (EFIAPI * SA_SET_LOCK_PRMRR) (UINT64 PrmrrBaseAddress, UINT32 PrmrrSize);
+
+
+///
+/// Function calls into the SA.
+///
+typedef struct {
+ SA_IO_READ_8 IoRead8; ///< Offset 0: - CPU I/O port 8-bit read.
+ SA_IO_READ_16 IoRead16; ///< Offset 4: - CPU I/O port 16-bit read.
+ SA_IO_READ_32 IoRead32; ///< Offset 8: - CPU I/O port 32-bit read.
+ SA_IO_WRITE_8 IoWrite8; ///< Offset 12: - CPU I/O port 8-bit write.
+ SA_IO_WRITE_16 IoWrite16; ///< Offset 16: - CPU I/O port 16-bit write.
+ SA_IO_WRITE_32 IoWrite32; ///< Offset 20: - CPU I/O port 32-bit write.
+ SA_MMIO_READ_8 MmioRead8; ///< Offset 24: - Memory Mapped I/O port 8-bit read.
+ SA_MMIO_READ_16 MmioRead16; ///< Offset 28: - Memory Mapped I/O port 16-bit read.
+ SA_MMIO_READ_32 MmioRead32; ///< Offset 32: - Memory Mapped I/O port 32-bit read.
+ SA_MMIO_READ_64 MmioRead64; ///< Offset 36: - Memory Mapped I/O port 64-bit read.
+ SA_MMIO_WRITE_8 MmioWrite8; ///< Offset 40: - Memory Mapped I/O port 8-bit write.
+ SA_MMIO_WRITE_16 MmioWrite16; ///< Offset 44: - Memory Mapped I/O port 16-bit write.
+ SA_MMIO_WRITE_32 MmioWrite32; ///< Offset 48: - Memory Mapped I/O port 32-bit write.
+ SA_MMIO_WRITE_64 MmioWrite64; ///< Offset 52: - Memory Mapped I/O port 64-bit write.
+ SA_SMBUS_READ_8 SmbusRead8; ///< Offset 56: - Smbus 8-bit read.
+ SA_SMBUS_READ_16 SmbusRead16; ///< Offset 60: - Smbus 16-bit read.
+ SA_SMBUS_WRITE_8 SmbusWrite8; ///< Offset 64: - Smbus 8-bit write.
+ SA_SMBUS_WRITE_16 SmbusWrite16; ///< Offset 68: - Smbus 16-bit write.
+ SA_GET_PCI_DEVICE_ADDRESS GetPciDeviceAddress; ///< Offset 72: - Get PCI device address.
+ SA_GET_PCIE_DEVICE_ADDRESS GetPcieDeviceAddress; ///< Offset 76: - Get PCI express device address.
+ SA_GET_RTC_TIME GetRtcTime; ///< Offset 80: - Get the current time value.
+ SA_GET_CPU_TIME GetCpuTime; ///< Offset 84: - The current CPU time in milliseconds.
+ SA_MEMORY_COPY CopyMem; ///< Offset 88: - Perform byte copy operation.
+ SA_MEMORY_SET_BYTE SetMem; ///< Offset 92: - Perform byte initialization operation.
+ SA_MEMORY_SET_WORD SetMemWord; ///< Offset 96: - Perform word initialization operation.
+ SA_MEMORY_SET_DWORD SetMemDword; ///< Offset 100: - Perform dword initialization operation.
+ SA_LEFT_SHIFT_64 LeftShift64; ///< Offset 104: - Left shift the 64-bit data value by specified number of bits.
+ SA_RIGHT_SHIFT_64 RightShift64; ///< Offset 108: - Right shift the 64-bit data value by specified number of bits.
+ SA_MULT_U64_U32 MultU64x32; ///< Offset 112: - Multiply a 64-bit data value by a 32-bit data value.
+ SA_DIV_U64_U64 DivU64x64; ///< Offset 116: - Divide a 64-bit data value by a 64-bit data value.
+ SA_GET_SPD_DATA GetSpdData; ///< Offset 120: - Read the SPD data over the SMBus, at the given SmBus SPD address and copy the data to the data structure.
+ SA_GET_RANDOM_NUMBER GetRandomNumber; ///< Offset 124: - Get the next random 32-bit number.
+ SA_CPU_MAILBOX_READ CpuMailboxRead; ///< Offset 128: - Perform a CPU mailbox read.
+ SA_CPU_MAILBOX_WRITE CpuMailboxWrite; ///< Offset 132: - Perform a CPU mailbox write.
+ SA_GET_MEMORY_VDD GetMemoryVdd; ///< Offset 136: - Get the current memory voltage (VDD).
+ SA_SET_MEMORY_VDD SetMemoryVdd; ///< Offset 140: - Set the memory voltage (VDD) to the given value.
+ SA_CHECKPOINT CheckPoint; ///< Offset 144: - Check point that is called at various points in the MRC.
+ SA_DEBUG_HOOK DebugHook; ///< Offset 148: - Typically used to display to the I/O port 80h.
+ SA_DEBUG_PRINT DebugPrint; ///< Offset 152: - Output a string to the debug stream/device.
+ SA_GET_RTC_CMOS GetRtcCmos; ///< Offset 156: - Get the current value of the specified RTC CMOS location.
+ SA_MSR_READ_64 ReadMsr64; ///< Offset 160: - Get the current value of the specified MSR location.
+ SA_MSR_WRITE_64 WriteMsr64; ///< Offset 164 - Set the current value of the specified MSR location.
+ SA_MRC_RETURN_FROM_SMC MrcReturnFromSmc; ///< Offset 168 - Hook function after returning from MrcStartMemoryConfiguration()
+ SA_MRC_DRAM_RESET MrcDramReset; ///< Offset 172 - Assert or deassert DRAM_RESET# pin; this is used in JEDEC Reset.
+ SA_DELAY_NS MrcDelayNs; ///< Offset 176 - Delay (stall) for the given amount of nanoseconds.
+} SA_FUNCTION_CALLS;
+
+///
+/// Function calls into the MRC.
+///
+typedef struct {
+ SA_CHANNEL_EXIST MrcChannelExist; ///< Offset 0: - Returns whether Channel is or is not present.
+ SA_PRINTF MrcPrintf; ///< Offset 4: - Print to output stream/device.
+ SA_CHANGE_MARGIN MrcChangeMargin; ///< Offset 8: - Change the margin.
+ SA_SIGN_EXTEND MrcSignExtend; ///< Offset 12: - Sign extends OldMSB to NewMSB Bits (Eg: Bit 6 to Bit 7).
+ SA_SHIFT_PI_COMMAND_TRAIN ShiftPiCommandTrain; ///< Offset 16: - Move CMD/CTL/CLK/CKE PIs during training.
+ SA_UPDATE_VREF MrcUpdateVref; ///< Offset 20: - Update the Vref value and wait until it is stable.
+} SA_MEMORY_FUNCTIONS;
+
+/**
+ Memory Configuration
+ The contents of this structure are CRC'd by the MRC for option change detection.
+ This structure is copied en mass to the MrcInput structure. If you add fields here, you must update the MrcInput structure.
+ <b>Revision 1</b>: - Initial version.
+ <b>Revision 2</b>: - Adding ChHashOverride option.
+ <b>Revision 3</b>: - Adding PDA enumeration option.
+ <b>Revision 4</b>: - Adding LPDDR4 Command Mirroring.
+ <b>Revision 5</b>: - Adding CpuBclkSpread option.
+ <b>Revision 6</b>: - Adding McParity option.
+ <b>Revision 7</b>: - Adding VddqVoltageOverride option.
+ <b>Revision 8</b>: - Adding ExtendedBankHashing option.
+ <b>Revision 9</b>: - Adding IbeccErrorInj option
+ **/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT16 Size; ///< Offset 28 The size of this structure, in bytes. Must be the first entry in this structure.
+ UINT8 HobBufferSize; ///< Offset 30 Size of HOB buffer for MRC
+
+ UINT8 SpdProfileSelected; ///< Offset 31 SPD XMP profile selection - for XMP supported DIMM: <b>0=Default DIMM profile</b>, 1=Customized profile, 2=XMP profile 1, 3=XMP profile 2.
+
+ // The following parameters are used only when SpdProfileSelected is UserDefined (CUSTOM PROFILE)
+ UINT16 tCL; ///< Offset 32 User defined Memory Timing tCL value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 31=Maximum.
+ UINT16 tRCDtRP; ///< Offset 34 User defined Memory Timing tRCD value (same as tRP), valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 63=Maximum
+ UINT16 tRAS; ///< Offset 36 User defined Memory Timing tRAS value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 64=Maximum.
+ UINT16 tWR; ///< Offset 38 User defined Memory Timing tWR value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 24.
+ UINT16 tRFC; ///< Offset 40 User defined Memory Timing tRFC value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 1023=Maximum.
+ UINT16 tRRD; ///< Offset 42 User defined Memory Timing tRRD value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 15=Maximum.
+ UINT16 tWTR; ///< Offset 44 User defined Memory Timing tWTR value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT16 tRTP; ///< Offset 46 User defined Memory Timing tRTP value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 15=Maximum. DDR4 legal values: 5, 6, 7, 8, 9, 10, 12
+ UINT16 tFAW; ///< Offset 48 User defined Memory Timing tFAW value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 63=Maximum.
+ UINT16 tCWL; ///< Offset 50 User defined Memory Timing tCWL value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 20=Maximum.
+ UINT16 tREFI; ///< Offset 52 User defined Memory Timing tREFI value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 65535=Maximum.
+ UINT16 PciIndex; ///< Offset 54 Pci index register address: <b>0xCF8=Default</b>
+ UINT16 PciData; ///< Offset 56 Pci data register address: <b>0xCFC=Default</b>
+ UINT16 VddVoltage; ///< Offset 58 DRAM voltage (Vdd) in millivolts: <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc.
+ UINT16 Idd3n; ///< Offset 60 EPG Active standby current (Idd3N) in milliamps from DIMM datasheet.
+ UINT16 Idd3p; ///< Offset 62 EPG Active power-down current (Idd3P) in milliamps from DIMM datasheet.
+
+ UINT32 EccSupport:1; ///< Offset 64 Bit 0 - DIMM Ecc Support option - for Desktop only: 0=Disable, <b>1=Enable</b>
+ UINT32 MrcSafeConfig:1; ///< Bit 1 - MRC Safe Mode: <b>0=Disable</b>, 1=Enable
+ UINT32 RemapEnable:1; ///< Bit 2 - This option is used to control whether to enable/disable memory remap above 4GB: 0=Disable, <b>1=Enable</b>.
+ UINT32 ScramblerSupport:1; ///< Bit 3 - Memory scrambler support: 0=Disable, <b>1=Enable</b>
+ UINT32 Vc1ReadMeter:1; ///< Bit 4 - VC1 Read Metering Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 ForceSingleSubchannel:1; ///< Bit 5 - TRUE means use SubChannel0 only (for LPDDR4): <b>0=Disable</b>, 1=Enable
+ UINT32 SimicsFlag:1; ///< Bit 6 - Option to Enable SIMICS: 0=Disable, <b>1=Enable</b>
+ UINT32 Ddr4DdpSharedClock:1; ///< Bit 7 - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP package. <b>0=Not shared</b>, 1=Shared
+ UINT32 SharedZqPin:1; ///< Bit 8 - Select if the ZQ resistor is shared between Ranks in DDR4/LPDDR4 DRAM Packages <b>0=Not Shared</b>, 1=Shared
+ UINT32 LpDqsOscEn:1; ///< Bit 9 - LPDDR Write DQ/DQS Retraining: 0=Disable, <b>1=Enable</b>
+ UINT32 RmtPerTask:1; ///< Bit 10 - Rank Margin Tool Per Task. <b>0 = Disabled</b>, 1 = Enabled
+ UINT32 TrainTrace:1; ///< Bit 11 - Trained state tracing debug. <b>0 = Disabled</b>, 1 = Enabled
+ UINT32 SafeMode:1; ///< Bit 12 - Define if safe mode is enabled for MC/IO
+ UINT32 MsHashEnable:1; ///< Bit 13 - Controller Hash Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 DisPgCloseIdleTimeout:1; ///< Bit 14 - Disable Page Close Idle Timeout: 0=Enable, <b>1=Disable</b>
+ UINT32 Ibecc:1; ///< Bit 15 - Inband ECC - for LPDDR4, LPDDR5 and DDR4 only: <b>0=Disable</b>, 1=Enable
+ UINT32 IbeccParity:1; ///< Bit 16 - Inband ECC Parity Control - for LPDDR4, LPDDR5 and DDR4 only: <b>0=Disable</b>, 1=Enable
+ UINT32 IbeccOperationMode:2; ///< Bits 17:18 - Inband ECC Operation Mode: 0=Functional Mode protects requests based on the address range, <b>1=Makes all requests non protected and ignore range checks</b>, 2=Makes all requests protected and ignore range checks
+ UINT32 ChHashOverride:1; ///< Bit 19 - Select if Channel Hash setting values will be taken from input parameters or automatically taken from POR values depending on DRAM type detected.
+ UINT32 McParity:1; ///< Bit 20 - MC Parity Control - Enable Parity for CMI/MC: <b>0=Disable</b>, 1=Enable
+ UINT32 IbeccErrorInj:1; ///< Bit 21 - In-Band ECC Error Injection: 1=Enable, <b>0=Disable</b>
+ UINT32 RsvdO64B22t31:10; ///< Bits 22:31 reserved
+ /**
+ Disables a DIMM slot in the channel even if a DIMM is present\n
+ Array index represents the channel number (0 = channel 0, 1 = channel 1)\n
+ <b>0x0 = DIMM 0 and DIMM 1 enabled</b>\n
+ 0x1 = DIMM 0 disabled, DIMM 1 enabled\n
+ 0x2 = DIMM 0 enabled, DIMM 1 disabled\n
+ 0x3 = DIMM 0 and DIMM 1 disabled (will disable the whole channel)\n
+ **/
+ UINT8 DisableDimmChannel[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS]; ///< Offset 68-75
+ UINT8 Ratio; ///< Offset 76 DDR Frequency ratio, to multiply by 133 or 100 MHz depending on RefClk. <b>0 = Auto</b>
+ UINT8 ProbelessTrace; ///< Offset 77 Probeless Trace: <b>0=Disabled</b>, <b>1=Enabled</b>
+ /**
+ - Channel Hash Enable.\n
+ NOTE: BIT7 will interleave the channels at a 2 cache-line granularity, BIT8 at 4 and BIT9 at 8\n
+ 0=BIT6, <B>1=BIT7</B>, 2=BIT8, 3=BIT9
+ **/
+ UINT8 ChHashInterleaveBit; ///< Offset 78 Option to select interleave Address bit. Valid values are 0 - 3 for BITS 6 - 9 (Valid values for BDW are 0-7 for BITS 6 - 13)
+ UINT8 SmramMask; ///< Offset 79 Reserved memory ranges for SMRAM
+ UINT32 BClkFrequency; ///< Offset 80 Base reference clock value, in Hertz: <b>100000000 = 100Hz</b>, 125000000=125Hz, 167000000=167Hz, 250000000=250Hz
+
+ /// Training Algorithms 1 Offset 84
+ UINT32 ECT:1; ///< Bit 0 - Enable/Disable Early Command Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 SOT:1; ///< Bit 1 - Enable/Disable Sense Amp Offset Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 ERDMPRTC2D:1; ///< Bit 2 - Enable/Disable Early ReadMPR Timing Centering 2D. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDMPRT:1; ///< Bit 3 - Enable/Disable Read MPR Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RCVET:1; ///< Bit 4 - Enable/Disable Receive Enable Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 JWRL:1; ///< Bit 5 - Enable/Disable JEDEC Write Leveling Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 EWRTC2D:1; ///< Bit 6 - Enable/Disable Early Write Time Centering 2D Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 ERDTC2D:1; ///< Bit 7 - Enable/Disable Early Read Time Centering 2D Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRTC1D:1; ///< Bit 8 - Enable/Disable 1D Write Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRVC1D:1; ///< Bit 9 - Enable/Disable 1D Write Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDTC1D:1; ///< Bit 10 - Enable/Disable 1D Read Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 DIMMODTT:1; ///< Bit 11 - Enable/Disable DIMM ODT Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 DIMMRONT:1; ///< Bit 12 - Enable/Disable DIMM RON training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRDSEQT:1; ///< Bit 13 - Enable/Disable Write Drive Strength / Equalization Training 2D. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 WRSRT:1; ///< Bit 14 - Enable/Disable Write Slew Rate traning. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable.</b>
+ UINT32 RDODTT:1; ///< Bit 15 - Enable/Disable Read ODT Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 RDEQT:1; ///< Bit 16 - Enable/Disable Read Equalization Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 RDAPT:1; ///< Bit 17 - Enable/Disable Read Amplifier Power Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 WRTC2D:1; ///< Bit 18 - Enable/Disable 2D Write Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDTC2D:1; ///< Bit 19 - Enable/Disable 2D Read Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRVC2D:1; ///< Bit 20 - Enable/Disable 2D Write Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDVC2D:1; ///< Bit 21 - Enable/Disable 2D Read Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 CMDVC:1; ///< Bit 22 - Enable/Disable Command Vref Centering Training. Note it is not recommended to change this setting from the default value 0=Disable, <b>1=Enable</b>.
+ UINT32 LCT:1; ///< Bit 23 - Enable/Disable Late Command Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RTL:1; ///< Bit 24 - Enable/Disable Round Trip Latency function. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 TAT:1; ///< Bit 25 - Enable/Disable Turn Around Time function. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 RMT:1; ///< Bit 26 - Enable/Disable Rank Margin Tool function: <b>0=Disable</b>, 1=Enable.
+ UINT32 MEMTST:1; ///< Bit 27 - Enable/Disable Memory Test function: <b>0=Disable</b>, 1=Enable.
+ UINT32 ALIASCHK:1; ///< Bit 28 - Enable/Disable DIMM SPD Alias Check: 0=Disable, <b>1=Enable</b>
+ UINT32 RCVENC1D:1; ///< Bit 29 - Enable/Disable Receive Enable Centering Training (LPDDR Only). Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable
+ UINT32 RMC:1; ///< Bit 30 - Enable/Disable Retrain Margin Check. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable
+ UINT32 WRDSUDT:1; ///< Bit 31 - Enable/Disable Write Drive Strength Up/Dn independently. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable
+ /// Training Algorithms 2 Offset 88
+ UINT32 DCC : 1; ///< Bit 0 - Enable/Disable Duty Cycle Correction: 0=Disable, 1=Enable.
+ UINT32 RDVC1D : 1; ///< Bit 1 - Enable/Disable Read Voltage Centering 1D: 0=Disable, 1=Enable.
+ UINT32 TXTCO : 1; ///< Bit 2 - Enable/Disable Write TCO Comp Training: 0=Disable, 1=Enable.
+ UINT32 CLKTCO : 1; ///< Bit 3 - Enable/Disable Clock TCO Comp Training: 0=Disable, 1=Enable.
+ UINT32 CMDSR : 1; ///< Bit 4 - Enable/Disable CMD Slew Rate Training: 0=Disable, 1=Enable.
+ UINT32 CMDDSEQ : 1; ///< Bit 5 - Enable/Disable CMD Drive Strength and Tx Equalization: 0=Disable, 1=Enable.
+ UINT32 DIMMODTCA : 1; ///< Bit 6 - Enable/Disable Dimm ODT CA Training: 0=Disable, 1=Enable.
+ UINT32 TXTCODQS : 1; ///< Bit 7 - Enable/Disable Write TCO Dqs Training: 0=Disable, 1=Enable.
+ UINT32 CMDDRUD : 1; ///< Bit 8 - Enable/Disable CMD/CTL Drive Strength Up/Dn 2D: 0=Disable, 1=Enable.
+ UINT32 VCCDLLBP : 1; ///< Bit 9 - Enable/Disable VccDLL bypass to VccIOG training: 0=Disable, 1=Enable.
+ UINT32 PVTTDNLP : 1; ///< Bit 10 - Enable/Disable PanicVttDnLp Training: 0=Disable, 1=Enable.
+ UINT32 RDVREFDC : 1; ///< Bit 11 - Enable/Disable Read Vref Decap Training: 0=Disable, 1=Enable.
+ UINT32 VDDQT : 1; ///< Bit 12 - Enable/Disable Vddq Training: 0=Disable, 1=Enable.
+ UINT32 RMTBIT : 1; ///< Bit 13 - Enable/Disable Rank Margin Tool Per Bit: 0=Disable, 1=Enable.
+ UINT32 PDA : 1; ///< BIT 14 - Enable/Disable PDA Enumeration Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRITE0 : 1; ///< BIT 15 - Write0 feature enablement
+ UINT32 ReservedBits2 :16; ///< Bits 16:31 - Reserved
+
+ UINT32 MrcTimeMeasure:1; ///< Offset 92 Bit 0 - Enables serial debug level to display the MRC execution times only: <b>0=Disable</b>, 1=Enable
+ UINT32 MrcFastBoot:1; ///< Bit 1 - Enables the MRC fast boot path for faster cold boot execution: 0=Disable, <b>1=Enable</b>
+ UINT32 DqPinsInterleaved:1; ///< Bit 2 - Interleaving mode of DQ/DQS pins which depends on board routing: <b>0=Disable</b>, 1=Enable
+ UINT32 RankInterleave:1; ///< Bit 3 - Rank Interleave Mode: 0=Disable, <b>1=Enable</b>
+ UINT32 EnhancedInterleave:1; ///< Bit 4 - Enhanced Interleave Mode: 0=Disable, <b>1=Enable</b>
+ UINT32 WeaklockEn:1; ///< Bit 5 - Weak Lock Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 ChHashEnable:1; ///< Bit 6 - Channel Hash Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 EnablePwrDn:1; ///< Bit 7 - Enable Power Down control for DDR: 0=PCODE control, <b>1=BIOS control</b>
+ UINT32 EnablePwrDnLpddr:1; ///< Bit 8 - Enable Power Down for LPDDR: 0=PCODE control, <b>1=BIOS control</b>
+ UINT32 SrefCfgEna:1; ///< Bit 9 - Enable Self Refresh: 0=Disable, <b>1=Enable</b>
+ UINT32 ThrtCkeMinDefeatLpddr:1; ///< Bit 10 - Throttler CKE min defeature for LPDDR: 0=Disable, <b>1=Enable</b>
+ UINT32 ThrtCkeMinDefeat:1; ///< Bit 11 - Throttler CKE min defeature: <b>0=Disable</b>, 1=Enable
+ UINT32 AutoSelfRefreshSupport:1; ///< Bit 12 - FALSE = No auto self refresh support, <b>TRUE = auto self refresh support</b>
+ UINT32 ExtTemperatureSupport:1; ///< Bit 13 - FALSE = No extended temperature support, <b>TRUE = extended temperature support</b>
+ UINT32 MobilePlatform:1; ///< Bit 14 - Memory controller device id indicates: <b>TRUE if mobile</b>, FALSE if not. Note: This will be auto-detected and updated.
+ UINT32 Force1Dpc:1; ///< Bit 15 - TRUE means force one DIMM per channel, <b>FALSE means no limit</b>
+ UINT32 ForceSingleRank:1; ///< Bit 16 - TRUE means use Rank0 only (in each DIMM): <b>0=Disable</b>, 1=Enable
+ UINT32 VttTermination:1; ///< Bit 17 - Vtt Termination for Data ODT: <b>0=Disable</b>, 1=Enable
+ UINT32 VttCompForVsshi:1; ///< Bit 18 - Enable/Disable Vtt Comparator For Vsshi: <b>0=Disable</b>, 1=Enable
+ UINT32 ExitOnFailure:1; ///< Bit 19 - MRC option for exit on failure or continue on failure: 0=Disable, <b>1=Enable</b>
+ UINT32 NewFeatureEnable1:1; ///< Bit 20 - Generic enable knob for new feature set 1 <b>0: Disable </b>; 1: Enable
+ UINT32 NewFeatureEnable2:1; ///< Bit 21 - Generic enable knob for new feature set 2 <b>0: Disable </b>; 1: Enable
+ UINT32 RhPrevention:1; ///< Bit 22 - RH Prevention Enable/Disable: 0=Disable, <b>1=Enable</b>
+ UINT32 RhSolution:1; ///< Bit 23 - Type of solution to be used for RHP - 0/1 = HardwareRhp/Refresh2x
+ UINT32 RefreshPanicWm:4; ///< Bit 24-27 - Refresh Panic Watermark, Range 1-8, default 8.
+ UINT32 RefreshHpWm:4; ///< Bit 28-31 - Refresh High Profile Watermark, Range 1-7, default 7.
+ UINT32 VddSettleWaitTime; ///< Offset 96 Amount of time in microseconds to wait for Vdd to settle on top of 200us required by JEDEC spec: <b>Default=0</b>
+ UINT16 SrefCfgIdleTmr; ///< Offset 100 Self Refresh idle timer: <b>512=Minimal</b>, 65535=Maximum
+ UINT16 ChHashMask; ///< Offset 102 Channel Hash Mask: 0x0001=BIT6 set(Minimal), 0x3FFF=BIT[19:6] set(Maximum), <b>0x30CE= BIT[19:18, 13:12 ,9:7] set</b>
+ UINT16 DdrFreqLimit; ///< Offset 104 Memory Frequency setting: 3=1067, 5=1333, 7=1600, 9=1867, 11=2133, 13=2400, <b>15=2667</b>
+ UINT8 MaxRttWr; ///< Offset 106 Maximum DIMM RTT_WR to use in power training: <b>0=ODT Off</b>, 1 = 120 ohms
+ UINT8 ThrtCkeMinTmr; ///< Offset 107 Throttler CKE min timer: 0=Minimal, 0xFF=Maximum, <b>0x00=Default</b>
+ UINT8 ThrtCkeMinTmrLpddr; ///< Offset 108 Throttler CKE min timer for LPDDR: 0=Minimal, 0xFF=Maximum, <b>0x00=Default</b>
+ BOOLEAN PerBankRefresh; ///< Offset 109 Enables and Disables the per bank refresh. This only impacts memory technologies that support PBR: LPDDR3, LPDDR4. FALSE=Disabled, <b>TRUE=Enabled</b>
+ UINT8 SaGv; ///< Offset 110 SA GV: <b>0=Disabled</b>, 1=Point1, 2=Point2, 3=Point3, 4=Point4, 5=Enabled
+ UINT8 NModeSupport; ///< Offset 111 Memory N Mode Support - Enable user to select Auto, 1N or 2N: <b>0=AUTO</b>, 1=1N, 2=2N.
+ UINT8 RefClk; ///< Offset 112 Selects the DDR base reference clock. 0x01 = 100MHz, <b>0x00 = 133MHz</b>
+ UINT8 EnCmdRate; ///< Offset 113 CMD Rate Enable: 0=Disable, 5=2 CMDs, <b>7=3 CMDs</b>, 9=4 CMDs, 11=5 CMDs, 13=6 CMDs, 15=7 CMDs
+ UINT8 Refresh2X; ///< Offset 114 Refresh 2x: <b>0=Disable</b>, 1=Enable for WARM or HOT, 2=Enable for HOT only
+ UINT8 EpgEnable; ///< Offset 115 Enable Energy Performance Gain.
+ UINT8 UserThresholdEnable; ///< Offset 116 Flag to manually select the DIMM CLTM Thermal Threshold, 0=Disable, 1=Enable, <b>0=Default</b>
+ UINT8 UserBudgetEnable; ///< Offset 117 Flag to manually select the Budget Registers for CLTM Memory Dimms , 0=Disable, 1=Enable, <b>0=Default</b>
+ UINT8 RetrainOnFastFail; ///< Offset 118 Restart MRC in Cold mode if SW MemTest fails during Fast flow. 0 = Disabled, <b>1 = Enabled</b>
+ UINT8 PowerDownMode; ///< Offset 119 CKE Power Down Mode: <b>0xFF=AUTO</b>, 0=No Power Down, 1= APD mode, 6=PPD-DLL Off mode
+ UINT8 PwdwnIdleCounter; ///< Offset 120 CKE Power Down Mode Idle Counter: 0=Minimal, 255=Maximum, <b>0x80=0x80 DCLK</b>
+ UINT8 CmdRanksTerminated; ///< Offset 121 LPDDR: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, Rank0 is terminating and Rank1 is non-terminating</b>
+ UINT16 MsHashMask; ///< Offset 122 Controller Hash Mask: 0x0001=BIT6 set(Minimal), 0x3FFF=BIT[19:6] set(Maximum), <b>0x30CE= BIT[19:18, 13:12 ,9:7] set</b>
+ UINT32 Lp5CccConfig; ///< Offset 124 BitMask where bits [3:0] are controller 0 Channel [3:0] and [7:4] are Controller 1 Channel [3:0]. 0 selects Ascending mapping and 1 selects Descending mapping.
+ UINT8 RMTLoopCount; ///< Offset 128 Indicates the Loop Count to be used for Rank Margin Tool Testing: 1=Minimal, 32=Maximum, 0=AUTO, <b>0=Default</b>
+ UINT8 MsHashInterleaveBit; ///< Offset 129 Option to select interleave Address bit. Valid values are 0 - 3 for BITS 6 - 9
+ UINT8 GearRatio; ///< Offset 130 This input control's the current gear expressed as an integer when SAGV is disabled: <b>0=Default</b>, 1, 2.
+ UINT8 Ddr4OneDpc; ///< Offset 131 DDR4 1DPC performance feature: 0 - Disabled; 1 - Enabled on DIMM0 only, 2 - Enabled on DIMM1 only; 3 - Enabled on both DIMMs. (bit [0] - DIMM0, bit [1] - DIMM1)
+ UINT32 BclkRfiFreq[MEM_MAX_SAGV_POINTS]; ///< Offset 132 Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No RFI Tuning</b>. Range is 98Mhz-100Mhz.
+ UINT16 SaGvFreq[MEM_MAX_SAGV_POINTS]; ///< Offset 148 Frequency per SAGV point. 0 is Auto, otherwise holds the frequency value expressed as an integer: <b>0=Default</b>, 1067, 1333, 1600, 1800, 1867, etc.
+ /**
+ Offset 156 Gear ratio per SAGV point. 0 is Auto, otherwise holds the Gear ratio expressed as an integer: <b>0=Default</b>, 1, 2.
+ Only valid combinations of Gear Ratio per point is:
+ | point | set1 | set2 | set3
+ | 0 | 1 | 2 | 2
+ | 1 | 1 | 2 | 2
+ | 2 | 1 | 2 | 2
+ | 3 | 1 | 2 | 1
+ **/
+ UINT8 SaGvGear[MEM_MAX_SAGV_POINTS]; ///< Offset 156
+ UINT8 IbeccProtectedRegionEnable[MEM_MAX_IBECC_REGIONS]; ///< Offset 160 Enable use of address range for ECC Protection: <b>0=Default</b>, 1
+ UINT16 IbeccProtectedRegionBase[MEM_MAX_IBECC_REGIONS]; ///< Offset 168 Base address for address range of ECC Protection: <b>0=Default</b>, 1
+ UINT16 IbeccProtectedRegionMask[MEM_MAX_IBECC_REGIONS]; ///< Offset 184 Mask address for address range of ECC Protection: <b>0=Default</b>, 1
+ UINT32 CmdMirror; ///< Offset 200 BitMask where bits [3:0] are controller 0 Channel [3:0] and [7:4] are Controller 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror.
+ UINT8 CpuBclkSpread; ///< Offset 204 CPU BCLK Spread Specturm: 0 = Disabled; <b>1 = Enabled</b>
+ UINT8 ExtendedBankHashing; ///< Offset 205 Enable EBH Extended Bank Hashing: 0=Disabled; <b>1 = Enabled</b>.
+ UINT16 VddqVoltageOverride; ///< Offset 206 VccddqVoltage override in # of 1mV
+ UINT8 MarginLimitCheck; ///< Offset 208 Margin limit check enable: <b>0=Disable</b>, 1=L1 only, 2=L2 only, 3=Both L1 and L2
+ UINT8 RsvdO209; ///< Offset 209
+ UINT16 MarginLimitL2; ///< Offset 210 Margin limit check L2 threshold: <b>100=Default</b>
+} MEMORY_CONFIGURATION;
+
+/// Memory Configuration
+/// The contents of this structure are not CRC'd by the MRC for option change detection.
+/// <b>Revision 1</b>: - Initial version.
+/// <b>Revision 2</b>: - Added MemTestOnWarmBoot
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-23 Config Block Header
+ SA_FUNCTION_CALLS SaCall; ///< Offset 24 Function calls into the SA.
+ SA_MEMORY_FUNCTIONS MrcCall; ///< Offset 204 Function calls into the MRC.
+ SPD_DATA_BUFFER *SpdData; ///< Offset 240 Memory SPD data, will be used by the MRC when SPD SmBus address is zero.
+ UINT32 Reserved0;
+ SA_MEMORY_DQDQS_MAPPING *DqDqsMap; ///< Offset 244 LPDDR DQ bit and DQS byte swizzling between CPU and DRAM.
+ SA_MEMORY_RCOMP *RcompData; ///< Offset 248 DDR RCOMP resistors and target values.
+ UINT64 PlatformMemorySize; ///< Offset 252 The minimum platform memory size required to pass control into DXE
+ UINT32 CleanMemory:1; ///< Offset 256 Ask MRC to clear memory content: <b>FALSE=Do not Clear Memory</b>; TRUE=Clear Memory
+ UINT32 ReservedBits5:31;
+ /**
+ Sets the serial debug message level\n
+ 0x00 = Disabled\n
+ 0x01 = Errors only\n
+ 0x02 = Errors and Warnings\n
+ <b>0x03 = Errors, Warnings, and Info</b>\n
+ 0x04 = Errors, Warnings, Info, and Events\n
+ 0x05 = Displays Memory Init Execution Time Summary only\n
+ **/
+ UINT8 SerialDebugLevel; ///< Offset 260
+ UINT8 MemTestOnWarmBoot; ///< Offset 261 Run Base Memory Test On WarmBoot: 0=Disabled, <b>1=Enabled</b>
+ UINT8 Reserved11[2]; ///< Offset 262 - 263 Reserved
+} MEMORY_CONFIG_NO_CRC;
+#pragma pack(pop)
+
+#endif // _MEMORY_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Overclocking/OverclockingConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Overclocking/OverclockingConfig.h
new file mode 100644
index 0000000000..462c02cef1
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Overclocking/OverclockingConfig.h
@@ -0,0 +1,236 @@
+/** @file
+ Overclocking Config Block.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _OVERCLOCKING_PREMEM_CONFIG_H_
+#define _OVERCLOCKING_PREMEM_CONFIG_H_
+
+#define OVERCLOCKING_CONFIG_REVISION 9
+
+extern EFI_GUID gOverclockingPreMemConfigGuid;
+
+#pragma pack (push,1)
+
+//
+// Max number of VF point offset
+//
+#ifndef CPU_OC_MAX_VF_POINTS
+#define CPU_OC_MAX_VF_POINTS 0xF
+#endif
+
+#ifndef CPU_OC_MAX_CORES
+#define CPU_OC_MAX_CORES 8
+#endif
+/**
+ Overclocking Configuration Structure.
+
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>
+ - Add PerCoreHtDisable
+ <b>Revision 3</b>
+ - Add Avx2VoltageScaleFactor and Avx512VoltageScaleFactor
+ <b>Revision 4</b>
+ - Add CoreVfPointOffsetMode & CoreVfPointOffset & CoreVfPointRatio & CoreVfPointCount
+ <b>Revision 5</b>
+ - Change OcLock default to 'Enabled'
+ <b>Revision 6</b>:
+ - Add DisableCoreMask.
+ <b>Revision 7</b>
+ Add UnlimitedIccMax
+ <b>Revision 8</b>
+ - Add PerCoreRatioOverride and PerCoreRatio for Per Core PState overclocking.
+ <b>Revision 9</b>
+ - Add VccInVoltageOverride.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ Overclocking support. This controls whether OC mailbox transactions are sent.
+ If disabled, all policies in this config block besides OcSupport and OcLock will be ignored.
+ <b>0: Disable</b>;
+ 1: Enable.
+ @note If PcdOverclockEnable is disabled, this should also be disabled.
+ **/
+ UINT32 OcSupport : 1;
+ UINT32 OcLock : 1; ///< If enabled, sets OC lock bit in MSR 0x194[20], locking the OC mailbox and other OC configuration settings.; 0: Disable; <b>1: Enable (Lock)</b>.
+ /**
+ Core voltage mode, specifies which voltage mode the processor will be operating.
+ <b>0: Adaptive Mode</b> allows the processor to interpolate a voltage curve when beyond fused P0 range;
+ 1: Override, sets one voltage for for the entire frequency range, Pn-P0.
+ **/
+ UINT32 CoreVoltageMode : 1;
+ UINT32 CorePllVoltageOffset : 6; ///< Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 in 17.5mv units.
+ UINT32 Avx2RatioOffset : 5; ///< AVX2 Ratio Offset. <b>0: No offset</b>. Range is 0-31. Used to lower the AVX ratio to maximize possible ratio for SSE workload.
+ UINT32 Avx3RatioOffset : 5; ///< AVX3 Ratio Offset. <b>0: No offset</b>. Range is 0-31. Used to lower the AVX3 ratio to maximize possible ratio for SSE workload.
+ UINT32 BclkAdaptiveVoltage : 1; ///< Bclk Adaptive Voltage enable/disable. <b>0: Disabled</b>, 1: Enabled. When enabled, the CPU V/F curves are aware of BCLK frequency when calculated.
+ /**
+ Ring Downbin enable/disable.
+ When enabled, the CPU will force the ring ratio to be lower than the core ratio.
+ Disabling will allow the ring and core ratios to run at the same frequency.
+ Uses OC Mailbox command 0x19.
+ 0: Disables Ring Downbin feature. <b>1: Enables Ring downbin feature.</b>
+ **/
+ UINT32 RingDownBin : 1;
+ /**
+ Ring voltage mode, specifies which voltage mode the processor will be operating.
+ <b>0: Adaptive Mode</b> allows the processor to interpolate a voltage curve when beyond fused P0 range;
+ 1: Override, sets one voltage for for the entire frequency range, Pn-P0.
+ **/
+ UINT32 RingVoltageMode : 1;
+ UINT32 GtVoltageMode : 1; ///< Specifies whether GT voltage is operating in Adaptive or Override mode: <b>0=Adaptive</b>, 1=Override
+ UINT32 RealtimeMemoryTiming : 1; ///< Enable/Disable the message sent to the CPU to allow realtime memory timing changes after MRC_DONE. <b>0=Disable</b>, 1=Enable
+ UINT32 FivrFaults : 1; ///< Fivr Faults. Enable or Disable FIVR Faults. 0: Disabled, <b>1: Enabled.</b>
+ UINT32 FivrEfficiency : 1; ///< Fivr Efficiency Management. 0: Disabled, <b>1: Enabled.</b>
+ /**
+ Selects Core Voltage & Frequency Point Offset between Legacy and Selection modes.
+ Need Reset System after enabling OverClocking Feature to Initialize the default value.
+ <b>0: In Legacy Mode, setting a global offset for the entire VF curve.</b>
+ 1: In Selection modes, setting a selected VF point.
+ **/
+ UINT32 CoreVfPointOffsetMode : 1;
+ UINT32 UnlimitedIccMax : 1; ///< Support Unlimited ICCMAX more than maximum value 255.75A. <b>0: Disabled</b>, 1: Enabled.
+ UINT32 PerCoreRatioOverride : 1; ///< Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new favored core ratio to each Core. <b>0: Disable</b>, 1: enable
+ UINT32 DynamicMemoryChange : 1; ///< Dynamic Memory Timings Changes; <b>0: Disabled</b>; 1: Enabled.
+ UINT32 RsvdBits : 2; ///< Reserved for future use
+
+ /**
+ Maximum core turbo ratio override allows to increase CPU core frequency beyond the fused max turbo ratio limit (P0).
+ <b>0. no override/HW defaults.</b>. Range 0-85.
+ **/
+ UINT8 CoreMaxOcRatio;
+ UINT8 GtMaxOcRatio; ///< Maximum GT turbo ratio override: 0=Minimal, 60=Maximum, <b>0=AUTO</b>
+ /**
+ Maximum ring ratio override allows to increase CPU ring frequency beyond the fused max ring ratio limit.
+ <b>0. no override/HW defaults.</b>. Range 0-85.
+ **/
+ UINT8 RingMaxOcRatio;
+ UINT8 RsvdByte1;
+ /**
+ The core voltage override which is applied to the entire range of cpu core frequencies.
+ Used when CoreVoltageMode = Override.
+ <b>0. no override</b>. Range 0-2000 mV.
+ **/
+ UINT16 CoreVoltageOverride;
+ /**
+ Adaptive Turbo voltage target used to define the interpolation voltage point when the cpu is operating in turbo mode range.
+ Used when CoreVoltageMode = Adaptive.
+ <b>0. no override</b>. Range 0-2000mV.
+ **/
+ UINT16 CoreVoltageAdaptive;
+ /**
+ The core voltage offset applied on top of all other voltage modes. This offset is applied over the entire frequency range.
+ This is a 2's complement number in mV units. <b>Default: 0</b> Range: -1000 to 1000.
+ **/
+ INT16 CoreVoltageOffset;
+ /**
+ The ring voltage override which is applied to the entire range of cpu ring frequencies.
+ Used when RingVoltageMode = Override.
+ <b>0. no override</b>. Range 0-2000 mV.
+ **/
+ UINT16 RingVoltageOverride;
+ /**
+ Adaptive Turbo voltage target used to define the interpolation voltage point when the ring is operating in turbo mode range.
+ Used when RingVoltageMode = Adaptive.
+ <b>0. no override</b>. Range 0-2000mV.
+ **/
+ UINT16 RingVoltageAdaptive;
+ /**
+ The ring voltage offset applied on top of all other voltage modes. This offset is applied over the entire frequency range.
+ This is a 2's complement number in mV units. <b>Default: 0</b> Range: -1000 to 1000.
+ **/
+ INT16 RingVoltageOffset;
+
+ INT16 GtVoltageOffset; ///< The voltage offset applied to GT slice. Valid range from -1000mv to 1000mv: <b>0=Minimal</b>, 1000=Maximum
+ UINT16 GtVoltageOverride; ///< The GT voltage override which is applied to the entire range of GT frequencies <b>0=Default</b>
+ UINT16 GtExtraTurboVoltage; ///< The adaptive voltage applied during turbo frequencies. Valid range from 0 to 2000mV: <b>0=Minimal</b>, 2000=Maximum
+ INT16 SaVoltageOffset; ///< The voltage offset applied to the SA. Valid range from -1000mv to 1000mv: <b>0=Default</b>
+ UINT32 GtPllVoltageOffset : 6; ///< GT PLL voltage offset. <b>0: No offset</b>. Range 0-63 in 17.5mv units.
+ UINT32 RingPllVoltageOffset : 6; ///< Ring PLL voltage offset. <b>0: No offset</b>. Range 0-63 in 17.5mv units.
+ UINT32 SaPllVoltageOffset : 6; ///< System Agent PLL voltage offset. <b>0: No offset</b>. Range 0-63 in 17.5mv units.
+ UINT32 McPllVoltageOffset : 6; ///< Memory Controller PLL voltage offset. <b>0: No offset</b>. Range 0-63 in 17.5mv units.
+ UINT32 RsvdBits1 : 8;
+ /**
+ TjMax Offset. Specified value here is clipped by pCode (125 - TjMax Offset) to support TjMax in the range of 62 to 115 deg Celsius.
+ <b> Default: 0 Hardware Defaults </b> Range 10 to 63. 0 = No offset / Keep HW default.
+ **/
+ UINT8 TjMaxOffset;
+ UINT8 RsvdByte2[3]; //< Reserved for dword alignment
+ /**
+ This service controls Core frequency reduction caused by high package temperatures for processors that
+ implement the Intel Thermal Velocity Boost (TVB) feature. It is required to be disabled for supporting
+ overclocking at frequencies higher than the default max turbo frequency.
+ <b>0: Disables TVB ratio clipping. </b>1: Enables TVB ratio clipping.
+ **/
+ UINT32 TvbRatioClipping : 1;
+ /**
+ This service controls thermal based voltage optimizations for processors that implement the Intel
+ Thermal Velocity Boost (TVB) feature.
+ 0: Disables TVB voltage optimization. <b>1: Enables TVB voltage optimization.</b>
+ **/
+ UINT32 TvbVoltageOptimization : 1;
+ UINT32 RsvdBits2 : 30;
+ /**
+ Defines the per-core HT disable mask where: 1 - Disable selected logical core HT, 0 - is ignored.
+ Input is in HEX and each bit maps to a logical core. Ex. A value of '1F' would disable HT for cores 4,3,2,1 and 0.
+ <b>Default is 0</b>, all cores have HT enabled. Range is 0 - 0x1FF. You can only disable up to MAX_CORE_COUNT - 1.
+ **/
+ UINT16 PerCoreHtDisable;
+ /**
+ Avx2 Voltage Guardband Scale Factor
+ This controls the AVX2 Voltage Guardband Scale factor applied to AVX2 workloads.
+ Valid range is 0-200 in 1/100 units, where a value of 125 would apply a 1.25 scale factor.
+ A value of 0 means no scale factor applied (no change to voltage on AVX commands)
+ A value of 100 applies the default voltage guardband values (1.0 factor).
+ A value > 100 will increase the voltage guardband on AVX2 workloads.
+ A value < 100 will decrease the voltage guardband on AVX2 workloads.
+
+ <b>0. No scale factor applied</b>
+ **/
+ UINT8 Avx2VoltageScaleFactor;
+ /**
+ Avx512 Voltage Guardband Scale Factor
+ This controls the AVX512 Voltage Guardband Scale factor applied to AVX512 workloads.
+ Valid range is 0-200 in 1/100 units, where a value of 125 would apply a 1.25 scale factor.
+ A value of 0 means no scale factor applied (no change to voltage on AVX commands)
+ A value of 100 applies the default voltage guardband values (1.0 factor).
+ A value > 100 will increase the voltage guardband on AVX512 workloads.
+ A value < 100 will decrease the voltage guardband on AVX512 workloads.
+
+ <b>0. No scale factor applied</b>
+ **/
+ UINT8 Avx512VoltageScaleFactor;
+ /**
+ Array used to specifies the Core Voltage Offset applied to the each selected VF Point.
+ This voltage is specified in millivolts.
+ **/
+ INT16 CoreVfPointOffset[CPU_OC_MAX_VF_POINTS];
+ UINT8 RsvdByte3[2]; ///< Just to keep native alignment.
+ /**
+ Array for the each selected VF Point to display the Core Ration.
+ **/
+ UINT8 CoreVfPointRatio[CPU_OC_MAX_VF_POINTS];
+ /**
+ Number of supported Core Voltage & Frequency Point.
+ **/
+ UINT8 CoreVfPointCount;
+ /**
+ Core mask is a bitwise indication of which core should be disabled. Bit 0 - core 0, bit 7 - core 7.
+ **/
+ UINT32 DisableCoreMask;
+ UINT8 PerCoreRatio[CPU_OC_MAX_CORES];
+ /**
+ The VcccIn voltage override.
+ This will override VccIn output voltage level to the voltage value specified.
+ The voltage level is fixed and will not change except on PKG C-states or resets.
+
+ <b>0. no override</b>. Range 0-3000 mV.
+ **/
+ UINT32 VccInVoltageOverride;
+} OVERCLOCKING_PREMEM_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _CPU_OVERCLOCKING_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/P2sb/P2sbConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/P2sb/P2sbConfig.h
new file mode 100644
index 0000000000..69271205b1
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/P2sb/P2sbConfig.h
@@ -0,0 +1,34 @@
+/** @file
+ P2sb policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _P2SB_CONFIG_H_
+#define _P2SB_CONFIG_H_
+
+#define P2SB_CONFIG_REVISION 1
+extern EFI_GUID gP2sbConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This structure contains the policies which are related to P2SB device.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ <b>(Test)</b>
+ The sideband MMIO register access to specific ports will be locked
+ before 3rd party code execution. Currently it disables PSFx access.
+ This policy unlocks the sideband MMIO space for those IPs.
+ <b>0: Lock sideband access </b>; 1: Unlock sideband access.
+ NOTE: Do not set this policy "SbAccessUnlock" unless its necessary.
+ **/
+ UINT32 SbAccessUnlock : 1;
+ UINT32 Rsvdbits : 31; ///< Reserved bits
+} PCH_P2SB_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _P2SB_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h
new file mode 100644
index 0000000000..b73108bcfd
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h
@@ -0,0 +1,44 @@
+/** @file
+ DMI policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _PCH_DMI_CONFIG_H_
+#define _PCH_DMI_CONFIG_H_
+
+#define PCH_DMI_CONFIG_REVISION 2
+extern EFI_GUID gPchDmiConfigGuid;
+
+
+#pragma pack (push,1)
+
+
+/**
+ The PCH_DMI_CONFIG block describes the expected configuration of the PCH for DMI.
+ <b>Revision 1</b>: - Initial version.
+ <b>Revision 2</b>: - Add OpioRecenter
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+
+ UINT32 PwrOptEnable : 1; ///< <b>0: Disable</b>; 1: Enable DMI Power Optimizer on PCH side.
+ UINT32 DmiAspmCtrl : 8; ///< ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b>
+ UINT32 CwbEnable : 1; ///< 0: Disable; <b>1: Enable</b> Central Write Buffer feature configurable and enabled by default
+ UINT32 L1RpCtl : 1; ///< 0: Disable; <b>1: Enable</b> Allow DMI enter L1 when all root ports are in L1, L0s or link down. Disabled by default.
+ /**
+ When set to TRUE turns on:
+ - L1 State Controller Power Gating
+ - L1 State PHY Data Lane Power Gating
+ - PHY Common Lane Power Gating
+ - Hardware Autonomous Enable
+ - PMC Request Enable and Sleep Enable
+ **/
+ UINT32 DmiPowerReduction : 1;
+ UINT32 OpioRecenter : 1; ///< 0: Disable; <b>1: Enable</b> Opio Recentering Disable for Pcie latency
+ UINT32 Rsvdbits : 19; ///< Reserved bits
+} PCH_DMI_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _PCH_DMI_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h
new file mode 100644
index 0000000000..de086473a9
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h
@@ -0,0 +1,368 @@
+/** @file
+ PCH Pcie root port policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _PCH_PCIERP_CONFIG_H_
+#define _PCH_PCIERP_CONFIG_H_
+
+#include <PchLimits.h>
+#include <PcieConfig.h>
+#include <ConfigBlock.h>
+
+#define PCIE_RP_CONFIG_REVISION 1
+#define PCIE_RP_PREMEM_CONFIG_REVISION 1
+#define PCIE_RP_DXE_CONFIG_REVISION 1
+
+extern EFI_GUID gPchPcieConfigGuid;
+extern EFI_GUID gPcieRpPreMemConfigGuid;
+
+#pragma pack (push,1)
+
+#define PCIE_LINK_EQ_COEFFICIENTS_MAX 10
+#define PCIE_LINK_EQ_PRESETS_MAX 11
+
+typedef enum {
+ PchPcieOverrideDisabled = 0,
+ PchPcieL1L2Override = 0x01,
+ PchPcieL1SubstatesOverride = 0x02,
+ PchPcieL1L2AndL1SubstatesOverride = 0x03,
+ PchPcieLtrOverride = 0x04
+} PCH_PCIE_OVERRIDE_CONFIG;
+
+/**
+ PCIe device table entry entry
+
+ The PCIe device table is being used to override PCIe device ASPM settings.
+ To take effect table consisting of such entries must be instelled as PPI
+ on gPchPcieDeviceTablePpiGuid.
+ Last entry VendorId must be 0.
+**/
+typedef struct {
+ UINT16 VendorId; ///< The vendor Id of Pci Express card ASPM setting override, 0xFFFF means any Vendor ID
+ UINT16 DeviceId; ///< The Device Id of Pci Express card ASPM setting override, 0xFFFF means any Device ID
+ UINT8 RevId; ///< The Rev Id of Pci Express card ASPM setting override, 0xFF means all steppings
+ UINT8 BaseClassCode; ///< The Base Class Code of Pci Express card ASPM setting override, 0xFF means all base class
+ UINT8 SubClassCode; ///< The Sub Class Code of Pci Express card ASPM setting override, 0xFF means all sub class
+ UINT8 EndPointAspm; ///< Override device ASPM (see: PCH_PCIE_ASPM_CONTROL)
+ ///< Bit 1 must be set in OverrideConfig for this field to take effect
+ UINT16 OverrideConfig; ///< The override config bitmap (see: PCH_PCIE_OVERRIDE_CONFIG).
+ /**
+ The L1Substates Capability Offset Override. (applicable if bit 2 is set in OverrideConfig)
+ This field can be zero if only the L1 Substate value is going to be override.
+ **/
+ UINT16 L1SubstatesCapOffset;
+ /**
+ L1 Substate Capability Mask. (applicable if bit 2 is set in OverrideConfig)
+ Set to zero then the L1 Substate Capability [3:0] is ignored, and only L1s values are override.
+ Only bit [3:0] are applicable. Other bits are ignored.
+ **/
+ UINT8 L1SubstatesCapMask;
+ /**
+ L1 Substate Port Common Mode Restore Time Override. (applicable if bit 2 is set in OverrideConfig)
+ L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue.
+ If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored,
+ and only L1SubstatesCapOffset is override.
+ **/
+ UINT8 L1sCommonModeRestoreTime;
+ /**
+ L1 Substate Port Tpower_on Scale Override. (applicable if bit 2 is set in OverrideConfig)
+ L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue.
+ If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored,
+ and only L1SubstatesCapOffset is override.
+ **/
+ UINT8 L1sTpowerOnScale;
+ /**
+ L1 Substate Port Tpower_on Value Override. (applicable if bit 2 is set in OverrideConfig)
+ L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue.
+ If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored,
+ and only L1SubstatesCapOffset is override.
+ **/
+ UINT8 L1sTpowerOnValue;
+
+ /**
+ SnoopLatency bit definition
+ Note: All Reserved bits must be set to 0
+
+ BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid
+ When clear values in bits 9:0 will be ignored
+ BITS[14:13] - Reserved
+ BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits
+ 000b - 1 ns
+ 001b - 32 ns
+ 010b - 1024 ns
+ 011b - 32,768 ns
+ 100b - 1,048,576 ns
+ 101b - 33,554,432 ns
+ 110b - Reserved
+ 111b - Reserved
+ BITS[9:0] - Snoop Latency Value. The value in these bits will be multiplied with
+ the scale in bits 12:10
+
+ This field takes effect only if bit 3 is set in OverrideConfig.
+ **/
+ UINT16 SnoopLatency;
+ /**
+ NonSnoopLatency bit definition
+ Note: All Reserved bits must be set to 0
+
+ BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid
+ When clear values in bits 9:0 will be ignored
+ BITS[14:13] - Reserved
+ BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits
+ 000b - 1 ns
+ 001b - 32 ns
+ 010b - 1024 ns
+ 011b - 32,768 ns
+ 100b - 1,048,576 ns
+ 101b - 33,554,432 ns
+ 110b - Reserved
+ 111b - Reserved
+ BITS[9:0] - Non Snoop Latency Value. The value in these bits will be multiplied with
+ the scale in bits 12:10
+
+ This field takes effect only if bit 3 is set in OverrideConfig.
+ **/
+ UINT16 NonSnoopLatency;
+
+ /**
+ Forces LTR override to be permanent
+ The default way LTR override works is:
+ rootport uses LTR override values provided by BIOS until connected device sends an LTR message, then it will use values from the message
+ This settings allows force override of LTR mechanism. If it's enabled, then:
+ rootport will use LTR override values provided by BIOS forever; LTR messages sent from connected device will be ignored
+ **/
+ UINT8 ForceLtrOverride;
+ UINT8 Reserved[3];
+} PCH_PCIE_DEVICE_OVERRIDE;
+
+///
+/// The values before AutoConfig match the setting of PCI Express Base Specification 1.1, please be careful for adding new feature
+///
+typedef enum {
+ PchPcieAspmDisabled,
+ PchPcieAspmL0s,
+ PchPcieAspmL1,
+ PchPcieAspmL0sL1,
+ PchPcieAspmAutoConfig,
+ PchPcieAspmMax
+} PCH_PCIE_ASPM_CONTROL;
+
+/**
+ Refer to PCH EDS for the PCH implementation values corresponding
+ to below PCI-E spec defined ranges
+**/
+typedef enum {
+ PchPcieL1SubstatesDisabled,
+ PchPcieL1SubstatesL1_1,
+ PchPcieL1SubstatesL1_1_2,
+ PchPcieL1SubstatesMax
+} PCH_PCIE_L1SUBSTATES_CONTROL;
+
+enum PCH_PCIE_MAX_PAYLOAD {
+ PchPcieMaxPayload128 = 0,
+ PchPcieMaxPayload256,
+ PchPcieMaxPayloadMax
+};
+
+typedef enum {
+ PcieLinkHardwareEq = 0, ///< Hardware is responsible for performing coefficient/preset search.
+ PcieLinkFixedEq ///< No coefficient/preset search is performed. Fixed values are used.
+} PCIE_LINK_EQ_METHOD;
+
+typedef enum {
+ PcieLinkEqPresetMode = 0, ///< Use presets during PCIe link equalization
+ PcieLinkEqCoefficientMode ///< Use coefficients during PCIe link equalization
+} PCIE_LINK_EQ_MODE;
+
+typedef struct {
+ UINT32 PreCursor; ///< Pre-cursor coefficient
+ UINT32 PostCursor; ///< Post-cursor coefficient
+} PCIE_LINK_EQ_COEFFICIENTS;
+
+/**
+ PCIe Link EQ Platform Settings
+**/
+typedef struct {
+ UINT8 PcieLinkEqMethod; ///< Tells BIOS which link EQ method should be used for this port. Please refer to PCIE_LINK_EQ_METHOD for details of supported methods. Default: PcieLinkHardwareEq
+ UINT8 PcieLinkEqMode; ///< Tells BIOS which mode should be used for PCIe link EQ. Please refer to PCIE_LINK_EQ_MODE for details of supported modes. Default: depends on SoC
+ /**
+ Specifies if BIOS should perform local transmitter override during phase 2 of EQ process.
+ If enabled value in Ph2LocalTransmitterOverridePreset must be valid.
+ <b>0: Disabled</b>; 1: Enabled
+ **/
+ UINT8 LocalTransmitterOverrideEnable;
+ /**
+ Tells BIOS how many presets/coefficients should be used during link EQ.
+ Entries in the Ph3CoefficientsList or Ph3PresetList(depending on chosen mode) need to be valid up to the number specified in this field.
+ **/
+ UINT8 Ph3NumberOfPresetsOrCoefficients;
+
+ PCIE_LINK_EQ_COEFFICIENTS Ph3CoefficientsList[PCIE_LINK_EQ_COEFFICIENTS_MAX]; ///< List of the PCIe coefficients to be used during equalization process. Only valid if PcieLinkEqMode is PcieLinkEqCoefficientMode
+ UINT32 Ph3PresetList[PCIE_LINK_EQ_PRESETS_MAX]; ///< List of the PCIe preset values to be used during equalization process. Only valid if PcieLinkEqMode is PcieLinkEqPresetMode
+ UINT32 Ph1DownstreamPortTransmitterPreset; ///< Specifies the value of the downstream port transmitter preset to be used during phase 1 of the equalization process. Will be applied to all lanes
+ UINT32 Ph1UpstreamPortTransmitterPreset; ///< Specifies the value of the upstream port transmitter preset to be used during phase 1 of the equalization process. Will be applied to all lanes
+ /**
+ Specifies the preset that should be used during local transmitter override during phase 2 of EQ process.
+ Used only if LocalTransmitterOverrideEnable is TRUE. Will be applied to all PCIe lanes of the root port.
+ Valid up to the PCIE_LINK_EQ_PRESET_MAX value. <b>Default: 0<\b>
+ **/
+ UINT32 Ph2LocalTransmitterOverridePreset;
+} PCIE_LINK_EQ_PLATFORM_SETTINGS;
+
+#define PCH_PCIE_NO_SUCH_CLOCK 0xFF
+
+typedef enum {
+ PchClockUsagePchPcie0 = 0,
+ PchClockUsagePchPcie1 = 1,
+ PchClockUsagePchPcie2 = 2,
+ PchClockUsagePchPcie3 = 3,
+ PchClockUsagePchPcie4 = 4,
+ PchClockUsagePchPcie5 = 5,
+ PchClockUsagePchPcie6 = 6,
+ PchClockUsagePchPcie7 = 7,
+ PchClockUsagePchPcie8 = 8,
+ PchClockUsagePchPcie9 = 9,
+ PchClockUsagePchPcie10 = 10,
+ PchClockUsagePchPcie11 = 11,
+ PchClockUsagePchPcie12 = 12,
+ PchClockUsagePchPcie13 = 13,
+ PchClockUsagePchPcie14 = 14,
+ PchClockUsagePchPcie15 = 15,
+ PchClockUsagePchPcie16 = 16,
+ PchClockUsagePchPcie17 = 17,
+ PchClockUsagePchPcie18 = 18,
+ PchClockUsagePchPcie19 = 19,
+ PchClockUsagePchPcie20 = 20,
+ PchClockUsagePchPcie21 = 21,
+ PchClockUsagePchPcie22 = 22,
+ PchClockUsagePchPcie23 = 23,
+ /**
+ Quantity of PCH and CPU PCIe ports, as well as their encoding in this enum, may change between
+ silicon generations and series. Do not assume that PCH port 0 will be always encoded by 0.
+ Instead, it is recommended to use (PchClockUsagePchPcie0 + PchPortIndex) style to be forward-compatible
+ **/
+ PchClockUsageCpuPcie0 = 0x40,
+ PchClockUsageCpuPcie1 = 0x41,
+ PchClockUsageCpuPcie2 = 0x42,
+ PchClockUsageCpuPcie3 = 0x43,
+
+ PchClockUsageLan = 0x70,
+ PchClockUsageUnspecified = 0x80, ///< In use for a purpose not listed above
+ PchClockUsageNotUsed = 0xFF
+} PCH_PCIE_CLOCK_USAGE;
+
+/**
+ PCH_PCIE_CLOCK describes PCIe source clock generated by PCH.
+**/
+typedef struct {
+ UINT8 Usage; ///< Purpose of given clock (see PCH_PCIE_CLOCK_USAGE). Default: Unused, 0xFF
+ UINT8 ClkReq; ///< ClkSrc - ClkReq mapping. Default: 1:1 mapping with Clock numbers
+ UINT8 RsvdBytes[2]; ///< Reserved byte
+} PCH_PCIE_CLOCK;
+
+/**
+ The PCH_PCI_EXPRESS_ROOT_PORT_CONFIG describe the feature and capability of each PCH PCIe root port.
+**/
+typedef struct {
+ PCIE_ROOT_PORT_COMMON_CONFIG PcieRpCommonConfig; ///an instance of Pcie Common Config
+ UINT8 ExtSync; ///< Indicate whether the extended synch is enabled. <b>0: Disable</b>; 1: Enable.
+ //
+ // Error handlings
+ //
+ UINT8 SystemErrorEnable; ///< Indicate whether the System Error is enabled. <b>0: Disable</b>; 1: Enable.
+ /**
+ The Multiple VC (MVC) supports hardware to avoid HoQ block for latency sensitive TC.
+ Currently it is only applicable to Root Ports with 2pX4 port configuration with 2 VCs,or
+ DMI port configuration with 3 VCs. For Root Ports 2pX4 configuration, two RPs (RP0,
+ RP2) shall support two PCIe VCs (VC0 & VC1) and the other RPs (RP1, RP3) shall be
+ disabled.
+ <b>0: Disable</b>; 1: Enable
+ **/
+ UINT8 MvcEnabled;
+ /**
+ Virtual Pin Port is industry standard introduced to PCIe Hot Plug support in systems
+ when GPIO pins expansion is needed. It is server specific feature.
+ <b>0x00: Default</b>; 0xFF: Disabled
+ **/
+ UINT8 VppPort;
+ UINT8 VppAddress; ///< PCIe Hot Plug VPP SMBus Address. Default is zero.
+ UINT8 RsvdBytes0[3]; ///< Reserved bytes
+} PCH_PCIE_ROOT_PORT_CONFIG;
+
+/**
+ The PCH_PCIE_CONFIG block describes the expected configuration of the PCH PCI Express controllers
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ ///
+ /// These members describe the configuration of each PCH PCIe root port.
+ ///
+ PCIE_COMMON_CONFIG PcieCommonConfig;
+ PCH_PCIE_ROOT_PORT_CONFIG RootPort[PCH_MAX_PCIE_ROOT_PORTS];
+ PCIE_LINK_EQ_PLATFORM_SETTINGS PcieLinkEqPlatformSettings; ///< Global PCIe link EQ settings that BIOS will use during PCIe link EQ for every port.
+ ///
+ /// <b>0: Use project default equalization settings</b>; 1: Use equalization settings from PcieLinkEqPlatformSettings
+ ///
+ UINT8 OverrideEqualizationDefaults;
+ ///
+ /// <b>(Test)</b> This member describes whether PCIE root port Port 8xh Decode is enabled. <b>0: Disable</b>; 1: Enable.
+ ///
+ UINT8 EnablePort8xhDecode;
+ ///
+ /// <b>(Test)</b> The Index of PCIe Port that is selected for Port8xh Decode (0 Based)
+ ///
+ UINT8 PchPciePort8xhDecodePortIndex;
+ UINT8 RsvdBytes0[1];
+} PCH_PCIE_CONFIG;
+
+/**
+ The PCH_PCIE_RP_PREMEM_CONFIG block describes early configuration of the PCH PCI Express controllers
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ Root Port enabling mask.
+ Bit0 presents RP1, Bit1 presents RP2, and so on.
+ 0: Disable; <b>1: Enable</b>.
+ **/
+ UINT32 RpEnabledMask;
+ /// Configuration of PCIe source clocks
+ ///
+ PCH_PCIE_CLOCK PcieClock[PCH_MAX_PCIE_CLOCKS];
+
+ /**
+ Per Controller Bifurcation Configuration
+ <b>0: Disabled</b>; 1: 4x1; 2: 1x2_2x1; 3: 2x2; 4: 1x4; 5: 4x2; 6: 1x4_2x2; 7: 2x2_1x4; 8: 2x4; 9: 1x8 (see: PCIE_BIFURCATION_CONFIG)
+ **/
+ UINT8 Bifurcation[PCH_MAX_PCIE_CONTROLLERS];
+ UINT8 Rsvd4[(4 - PCH_MAX_PCIE_CONTROLLERS % 4) % 4];
+} PCH_PCIE_RP_PREMEM_CONFIG;
+
+/**
+ The PCIE_RP_DXE_CONFIG block describes the expected configuration of the PCH PCI Express controllers in DXE phase
+
+ <b>Revision 1</b>:
+ - Init version
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+
+ /**
+ PCIe device override table
+ The PCIe device table is being used to override PCIe device ASPM settings.
+ And it's only used in DXE phase.
+ Please refer to PCH_PCIE_DEVICE_OVERRIDE structure for the table.
+ Last entry VendorId must be 0.
+ **/
+ PCH_PCIE_DEVICE_OVERRIDE *PcieDeviceOverrideTablePtr;
+} PCIE_RP_DXE_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _PCH_PCIERP_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h
new file mode 100644
index 0000000000..4c5b075334
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h
@@ -0,0 +1,217 @@
+/** @file
+ PCIe Config Block
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _PCIE_CONFIG_H_
+#define _PCIE_CONFIG_H_
+#include <CpuPcieInfo.h>
+
+#define PCIE_CONFIG_REVISION 3
+/*
+<b>Revision 2< / b>:
+FomsCp - Deprecated
+<b>Revision 3< / b>:
+Added PCIE_EQ_PARAM HwEqGen3CoeffList for all CPU_PCIE_MAX_ROOT_PORTS
+Added PCIE_EQ_PARAM HwEqGen4CoeffList for all CPU_PCIE_MAX_ROOT_PORTS
+Added PCIE_EQ_PARAM HwEqGen5CoeffList for all CPU_PCIE_MAX_ROOT_PORTS
+*/
+
+extern EFI_GUID gPcieConfigGuid;
+
+#pragma pack (push,1)
+
+enum PCIE_COMPLETION_TIMEOUT {
+ PcieCompletionTO_Default,
+ PcieCompletionTO_50_100us,
+ PcieCompletionTO_1_10ms,
+ PcieCompletionTO_16_55ms,
+ PcieCompletionTO_65_210ms,
+ PcieCompletionTO_260_900ms,
+ PcieCompletionTO_1_3P5s,
+ PcieCompletionTO_4_13s,
+ PcieCompletionTO_17_64s,
+ PcieCompletionTO_Disabled
+};
+
+enum PCIE_SPEED {
+ PcieAuto,
+ PcieGen1,
+ PcieGen2,
+ PcieGen3,
+ PcieGen4
+};
+
+/**
+ Represent lane specific PCIe Gen3 equalization parameters.
+**/
+typedef struct {
+ UINT8 Cm; ///< Coefficient C-1
+ UINT8 Cp; ///< Coefficient C+1
+ UINT8 Rsvd0[2]; ///< Reserved bytes
+} PCIE_EQ_PARAM;
+
+typedef struct {
+ UINT16 LtrMaxSnoopLatency; ///< <b>(Test)</b> Latency Tolerance Reporting, Max Snoop Latency.
+ UINT16 LtrMaxNoSnoopLatency; ///< <b>(Test)</b> Latency Tolerance Reporting, Max Non-Snoop Latency.
+ UINT8 SnoopLatencyOverrideMode; ///< <b>(Test)</b> Latency Tolerance Reporting, Snoop Latency Override Mode.
+ UINT8 SnoopLatencyOverrideMultiplier; ///< <b>(Test)</b> Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+ UINT16 SnoopLatencyOverrideValue; ///< <b>(Test)</b> Latency Tolerance Reporting, Snoop Latency Override Value.
+ UINT8 NonSnoopLatencyOverrideMode; ///< <b>(Test)</b> Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+ UINT8 NonSnoopLatencyOverrideMultiplier; ///< <b>(Test)</b> Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+ UINT16 NonSnoopLatencyOverrideValue; ///< <b>(Test)</b> Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+ UINT8 LtrConfigLock; ///< <b>0: Disable</b>; 1: Enable.
+ UINT8 ForceLtrOverride;
+ UINT16 RsvdByte1;
+} PCIE_LTR_CONFIG;
+
+
+/**
+ Specifies the form factor that the slot
+ implements. For custom form factors that
+ do not require any special handling please
+ set PcieFormFactorOther.
+**/
+typedef enum {
+ PcieFormFactorOther = 0,
+ PcieFormFactorCem,
+ PcieFormFactorMiniPci,
+ PcieFormFactorM2,
+ PcieFormFactorOcuLink,
+ PcieFormFactorExpressModule, // Also known as Server IO module(SIOM)
+ PcieFormFactorExpressCard,
+ PcieFormFactorU2 // Also known as SF-8639
+} PCIE_FORM_FACTOR;
+
+//Note: This structure will be expanded to hold all common PCIe policies between SA and PCH RootPort
+typedef struct {
+ UINT32 HotPlug : 1; ///< Indicate whether the root port is hot plug available. <b>0: Disable</b>; 1: Enable.
+ UINT32 PmSci : 1; ///< Indicate whether the root port power manager SCI is enabled. 0: Disable; <b>1: Enable</b>.
+ UINT32 TransmitterHalfSwing : 1; ///< Indicate whether the Transmitter Half Swing is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 AcsEnabled : 1; ///< Indicate whether the ACS is enabled. 0: Disable; <b>1: Enable</b>.
+ //
+ // Error handlings
+ //
+ UINT32 AdvancedErrorReporting : 1; ///< Indicate whether the Advanced Error Reporting is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 UnsupportedRequestReport : 1; ///< Indicate whether the Unsupported Request Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 FatalErrorReport : 1; ///< Indicate whether the Fatal Error Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 NoFatalErrorReport : 1; ///< Indicate whether the No Fatal Error Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 CorrectableErrorReport : 1; ///< Indicate whether the Correctable Error Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 SystemErrorOnFatalError : 1; ///< Indicate whether the System Error on Fatal Error is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 SystemErrorOnNonFatalError : 1; ///< Indicate whether the System Error on Non Fatal Error is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 SystemErrorOnCorrectableError : 1; ///< Indicate whether the System Error on Correctable Error is enabled. <b>0: Disable</b>; 1: Enable.
+ /**
+ Max Payload Size supported, Default <b>128B</b>, see enum CPU_PCIE_MAX_PAYLOAD
+ Changes Max Payload Size Supported field in Device Capabilities of the root port.
+ **/
+ UINT32 MaxPayload : 2;
+ UINT32 DpcEnabled : 1; ///< Downstream Port Containment. 0: Disable; <b>1: Enable</b>
+ UINT32 RpDpcExtensionsEnabled : 1; ///< RP Extensions for Downstream Port Containment. 0: Disable; <b>1: Enable</b>
+ /**
+ Indicates how this root port is connected to endpoint. 0: built-in device; <b>1: slot</b>
+ Built-in is incompatible with hotplug-capable ports.
+ **/
+ UINT32 SlotImplemented : 1;
+ UINT32 PtmEnabled : 1; ///< Enables PTM capability
+ UINT32 SlotPowerLimitScale : 2; ///< <b>(Test)</b> Specifies scale used for slot power limit value. Leave as 0 to set to default. Default is <b>zero</b>.
+ UINT32 SlotPowerLimitValue : 12; //< <b>(Test)</b> Specifies upper limit on power supplies by slot. Leave as 0 to set to default. Default is <b>zero</b>.
+ /**
+ Probe CLKREQ# signal before enabling CLKREQ# based power management.
+ Conforming device shall hold CLKREQ# low until CPM is enabled. This feature attempts
+ to verify CLKREQ# signal is connected by testing pad state before enabling CPM.
+ In particular this helps to avoid issues with open-ended PCIe slots.
+ This is only applicable to non hot-plug ports.
+ <b>0: Disable</b>; 1: Enable.
+ **/
+ UINT32 ClkReqDetect : 1;
+ /**
+ Set if the slot supports manually operated retention latch.
+ **/
+ UINT32 MrlSensorPresent : 1;
+ UINT32 RelaxedOrder : 1;
+ UINT32 NoSnoop : 1;
+ UINT32 RsvdBits0 : 28; ///< Reserved bits.
+ /**
+ PCIe Gen3 Equalization Phase 3 Method (see CPU_PCIE_EQ_METHOD).
+ 0: DEPRECATED, hardware equalization; <b>1: hardware equalization</b>; 4: Fixed Coefficients
+ **/
+ UINT8 Gen3EqPh3Method;
+ UINT8 PhysicalSlotNumber; ///< Indicates the slot number for the root port. Default is the value as root port index.
+ UINT8 CompletionTimeout; ///< The completion timeout configuration of the root port (see: CPU_PCIE_COMPLETION_TIMEOUT). Default is <b>PchPcieCompletionTO_Default</b>.
+ //
+ // Power Management
+ //
+ UINT8 Aspm; ///< The ASPM configuration of the root port (see: CPU_PCIE_ASPM_CONTROL). Default is <b>PchPcieAspmAutoConfig</b>.
+ UINT8 L1Substates; ///< The L1 Substates configuration of the root port (see: CPU_PCIE_L1SUBSTATES_CONTROL). Default is <b>PchPcieL1SubstatesL1_1_2</b>.
+ UINT8 LtrEnable; ///< Latency Tolerance Reporting Mechanism. <b>0: Disable</b>; 1: Enable.
+ UINT8 EnableCpm; ///< Enables Clock Power Management; even if disabled, CLKREQ# signal can still be controlled by L1 PM substates mechanism
+ UINT8 PcieSpeed; ///< Contains speed of PCIe bus (see: PCIE_SPEED)
+ /**
+ <b>(Test)</b>
+ Forces LTR override to be permanent
+ The default way LTR override works is:
+ rootport uses LTR override values provided by BIOS until connected device sends an LTR message, then it will use values from the message
+ This settings allows force override of LTR mechanism. If it's enabled, then:
+ rootport will use LTR override values provided by BIOS forever; LTR messages sent from connected device will be ignored
+ **/
+ PCIE_LTR_CONFIG PcieRpLtrConfig; ///< <b>(Test)</b> Latency Tolerance Reporting Policies including LTR limit and Override
+ /**
+ The number of milliseconds reference code will wait for link to exit Detect state for enabled ports
+ before assuming there is no device and potentially disabling the port.
+ It's assumed that the link will exit detect state before root port initialization (sufficient time
+ elapsed since PLTRST de-assertion) therefore default timeout is zero. However this might be useful
+ if device power-up seqence is controlled by BIOS or a specific device requires more time to detect.
+ In case of non-common clock enabled the default timout is 15ms.
+ <b>Default: 0</b>
+ **/
+ UINT16 DetectTimeoutMs;
+ UINT8 FormFactor; // Please check PCIE_FORM_FACTOR for supported values
+ UINT8 Reserved;
+} PCIE_ROOT_PORT_COMMON_CONFIG;
+
+/**
+ PCIe Common Config
+ @note This structure will be expanded to hold all common PCIe policies between SA and PCH
+**/
+typedef struct {
+ ///
+ /// This member describes whether Peer Memory Writes are enabled on the platform. <b>0: Disable</b>; 1: Enable.
+ ///
+ UINT32 EnablePeerMemoryWrite : 1;
+ /**
+ RpFunctionSwap allows BIOS to use root port function number swapping when root port of function 0 is disabled.
+ A PCIE device can have higher functions only when Function0 exists. To satisfy this requirement,
+ BIOS will always enable Function0 of a device that contains more than 0 enabled root ports.
+ - <b>Enabled: One of enabled root ports get assigned to Function0.</b>
+ This offers no guarantee that any particular root port will be available at a specific DevNr:FuncNr location
+ - Disabled: Root port that corresponds to Function0 will be kept visible even though it might be not used.
+ That way rootport - to - DevNr:FuncNr assignment is constant. This option will impact ports 1, 9, 17.
+ NOTE: This option will not work if ports 1, 9, 17 are fused or configured for RST PCIe storage or disabled through policy
+ In other words, it only affects ports that would become hidden because they have no device connected.
+ NOTE: Disabling function swap may have adverse impact on power management. This option should ONLY
+ be used when each one of root ports 1, 9, 17:
+ - is configured as PCIe and has correctly configured ClkReq signal, or
+ - does not own any mPhy lanes (they are configured as SATA or USB)
+ **/
+ UINT32 RpFunctionSwap : 1;
+ /**
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ <b>0: Disable</b>, 1: Enable
+ **/
+ UINT32 ComplianceTestMode : 1;
+ UINT32 RsvdBits0 : 29; ///< Reserved bits
+ ///
+ /// List of coefficients used during equalization (applicable to both software and hardware EQ)
+ /// Deprecated Policy
+ ///
+ PCIE_EQ_PARAM HwEqGen3CoeffList[PCIE_HWEQ_COEFFS_MAX];
+} PCIE_COMMON_CONFIG;
+
+typedef struct {
+ PCIE_EQ_PARAM HwEqGen3CoeffList[CPU_PCIE_MAX_ROOT_PORTS][PCIE_HWEQ_COEFFS_MAX];
+ PCIE_EQ_PARAM HwEqGen4CoeffList[CPU_PCIE_MAX_ROOT_PORTS][PCIE_HWEQ_COEFFS_MAX];
+} PCIE_COMMON_CONFIG2;
+
+#pragma pack (pop)
+#endif // _PCIE_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h
new file mode 100644
index 0000000000..5c7811823d
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h
@@ -0,0 +1,86 @@
+/** @file
+ ADR policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _ADR_CONFIG_H_
+#define _ADR_CONFIG_H_
+
+#include <ConfigBlock.h>
+
+#define ADR_CONFIG_REVISION 1
+extern EFI_GUID gAdrConfigGuid;
+
+#pragma pack (push,1)
+
+typedef enum {
+ AdrScale1us,
+ AdrScale10us,
+ AdrScale100us,
+ AdrScale1ms,
+ AdrScale10ms,
+ AdrScale100ms,
+ AdrScale1s,
+ AdrScale10s
+} ADR_TIMER_SCALE;
+
+/**
+ ADR Source Enable
+**/
+typedef union {
+ struct {
+ UINT32 Reserved1 : 1;
+ UINT32 AdrSrcPbo : 1;
+ UINT32 AdrSrcPmcUncErr : 1;
+ UINT32 AdrSrcPchThrm : 1;
+ UINT32 AdrSrcMePbo : 1;
+ UINT32 AdrSrcCpuThrm : 1;
+ UINT32 AdrSrcMegbl : 1;
+ UINT32 AdrSrcLtReset : 1;
+ UINT32 AdrSrcPmcWdt : 1;
+ UINT32 AdrSrcMeWdt : 1;
+ UINT32 AdrSrcPmcFw : 1;
+ UINT32 AdrSrcPchpwrFlr : 1;
+ UINT32 AdrSrcSyspwrFlr : 1;
+ UINT32 Reserved2 : 1;
+ UINT32 AdrSrcMiaUxsErr : 1;
+ UINT32 AdrSrcMiaUxErr : 1;
+ UINT32 AdrSrcCpuThrmWdt : 1;
+ UINT32 AdrSrcMeUncErr : 1;
+ UINT32 AdrSrcAdrGpio : 1;
+ UINT32 AdrSrcOcwdtNoicc : 1;
+ UINT32 AdrSrcOcwdtIcc : 1;
+ UINT32 AdrSrcCseHecUncErr : 1;
+ UINT32 AdrSrcPmcSramUncErr : 1;
+ UINT32 AdrSrcPmcIromParity : 1;
+ UINT32 AdrSrcPmcRfFusaErr : 1;
+ UINT32 Reserved3 : 4;
+ UINT32 AdrSrcPpbrParityErr : 1;
+ UINT32 Reserved4 : 2;
+ } Field;
+ UINT32 Value;
+} ADR_SOURCE_ENABLE;
+
+/**
+ ADR Configuration
+ <b>Revision 1</b>: - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ UINT32 AdrEn : 2; ///< Determine if Adr is enabled - 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE
+ UINT32 AdrTimerEn : 2; ///< Determine if Adr timer options are enabled - 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE
+ UINT32 AdrTimer1Val : 2; ///< Determines the Timeout value used for the ADR timer 1. A value of zero bypasses the timer
+ UINT32 AdrMultiplier1Val : 8; ///< Specifies the tick frequency upon which the timer 1 will increment. ADR_TIMER_SCALE should be used to encode values
+ UINT32 AdrTimer2Val : 8; ///< Determines the Timeout value used for the ADR timer 2. A value of zero bypasses the timer
+ UINT32 AdrMultiplier2Val : 8; ///< Specifies the tick frequency upon which the timer 2 will increment. ADR_TIMER_SCALE should be used to encode values
+ UINT32 AdrHostPartitionReset : 2; ///< Determine if Host Partition Reset is enabled - 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE
+ UINT32 AdrSrcOverride : 1; ///< Check if default ADR sources will be overriten with custom 0: Not overwritten, 1: Overwritten
+ UINT32 ReservedBits : 31;
+ ADR_SOURCE_ENABLE AdrSrcSel; ///< Determine which ADR sources are enabled - 0: Enabled, 1: Disabled
+} ADR_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _ADR_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h
new file mode 100644
index 0000000000..2f8e19b50b
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h
@@ -0,0 +1,391 @@
+/** @file
+ Power Management policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _PM_CONFIG_H_
+#define _PM_CONFIG_H_
+
+#include <ConfigBlock.h>
+
+#define PM_CONFIG_REVISION 2
+extern EFI_GUID gPmConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This structure allows to customize PCH wake up capability from S5 or DeepSx by WOL, LAN, PCIE wake events.
+**/
+typedef struct {
+ /**
+ Corresponds to the PME_B0_S5_DIS bit in the General PM Configuration B (GEN_PMCON_B) register.
+ When set to 1, this bit blocks wake events from PME_B0_STS in S5, regardless of the state of PME_B0_EN.
+ When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. <b>0: Disable</b>; 1: Enable.
+ **/
+ UINT32 PmeB0S5Dis : 1;
+ UINT32 WolEnableOverride : 1; ///< Corresponds to the "WOL Enable Override" bit in the General PM Configuration B (GEN_PMCON_B) register. 0: Disable; <b>1: Enable</b>.
+ UINT32 PcieWakeFromDeepSx : 1; ///< Determine if enable PCIe to wake from deep Sx. <b>0: Disable</b>; 1: Enable.
+ UINT32 WoWlanEnable : 1; ///< Determine if WLAN wake from Sx, corresponds to the "HOST_WLAN_PP_EN" bit in the PWRM_CFG3 register. <b>0: Disable</b>; 1: Enable.
+ UINT32 WoWlanDeepSxEnable : 1; ///< Determine if WLAN wake from DeepSx, corresponds to the "DSX_WLAN_PP_EN" bit in the PWRM_CFG3 register. <b>0: Disable</b>; 1: Enable.
+ UINT32 LanWakeFromDeepSx : 1; ///< Determine if enable LAN to wake from deep Sx. 0: Disable; <b>1: Enable</b>.
+ UINT32 RsvdBits0 : 26;
+} PCH_WAKE_CONFIG;
+
+typedef enum {
+ PchDeepSxPolDisable,
+ PchDpS5BatteryEn,
+ PchDpS5AlwaysEn,
+ PchDpS4S5BatteryEn,
+ PchDpS4S5AlwaysEn,
+ PchDpS3S4S5BatteryEn,
+ PchDpS3S4S5AlwaysEn
+} PCH_DEEP_SX_CONFIG;
+
+typedef enum {
+ PchSlpS360us = 1,
+ PchSlpS31ms,
+ PchSlpS350ms,
+ PchSlpS32s
+} PCH_SLP_S3_MIN_ASSERT;
+
+typedef enum {
+ PchSlpS4PchTime, ///< The time defined in PCH EDS Power Sequencing and Reset Signal Timings table
+ PchSlpS41s,
+ PchSlpS42s,
+ PchSlpS43s,
+ PchSlpS44s
+} PCH_SLP_S4_MIN_ASSERT;
+
+typedef enum {
+ PchSlpSus0ms = 1,
+ PchSlpSus500ms,
+ PchSlpSus1s,
+ PchSlpSus4s,
+} PCH_SLP_SUS_MIN_ASSERT;
+
+typedef enum {
+ PchSlpA0ms = 1,
+ PchSlpA4s,
+ PchSlpA98ms,
+ PchSlpA2s,
+} PCH_SLP_A_MIN_ASSERT;
+
+typedef enum {
+ S0ixDisQNoChange,
+ S0ixDisQDciOob,
+ S0ixDisQUsb2Dbc,
+ S0ixDisQMax,
+} S0IX_DISQ_PROBE_TYPE;
+
+/**
+ Low Power Mode Enable config.
+ Used to configure if respective S0i2/3 sub-states are to be supported
+ by the platform. Each bit corresponds to one LPM state - LPMx->BITx.
+ Some sub-states will require external FETs controlled by EXT_PWR_GATE#/EXT_PWR_GATE2# pins
+ to gate v1p05-PHY or v1p05-IS supplies
+**/
+typedef union {
+ struct {
+ UINT32 S0i2p0En : 1; ///< LPM0 - S0i2.0 Enable
+ UINT32 S0i2p1En : 1; ///< LPM1 - S0i2.1 Enable
+ /**
+ LPM2 - S0i2.2 Enable.
+ Requires EXT_PWR_GATE# controlled FET to gate v1p05 PHY.
+ Refer to V1p05PhyExtFetControlEn.
+ **/
+ UINT32 S0i2p2En : 1;
+ UINT32 S0i3p0En : 1; ///< LPM3 - S0i3.0 Enable
+ UINT32 S0i3p1En : 1; ///< LPM4 - S0i3.1 Enable
+ UINT32 S0i3p2En : 1; ///< LPM5 - S0i3.2 Enable
+ /**
+ LPM5 - S0i3.3 Enable.
+ Requires EXT_PWR_GATE# controlled FET to gate v1p05 PHY.
+ Refer to V1p05PhyExtFetControlEn.
+ **/
+ UINT32 S0i3p3En : 1;
+ /**
+ LPM7 - S0i3.4 Enable.
+ Requires EXT_PWR_GATE2# controlled FET to gate v1p05-SRAM/ISCLK.
+ Refer to V1p05IsExtFetControlEn.
+ **/
+ UINT32 S0i3p4En : 1;
+ UINT32 Reserved : 24; ///< Reserved
+ } Field;
+ UINT32 Val;
+} PMC_LPM_S0IX_SUB_STATE_EN;
+
+/**
+ Description of Global Reset Trigger/Event Mask register
+**/
+typedef union {
+ struct {
+ UINT32 Reserved1 : 1;
+ UINT32 Pbo : 1;
+ UINT32 PmcUncErr : 1;
+ UINT32 PchThrm : 1;
+ UINT32 MePbo : 1;
+ UINT32 CpuThrm : 1;
+ UINT32 Megbl : 1;
+ UINT32 LtReset : 1;
+ UINT32 PmcWdt : 1;
+ UINT32 MeWdt : 1;
+ UINT32 PmcFw : 1;
+ UINT32 PchpwrFlr : 1;
+ UINT32 SyspwrFlr : 1;
+ UINT32 Reserved2 : 1;
+ UINT32 MiaUxsErr : 1;
+ UINT32 MiaUxErr : 1;
+ UINT32 CpuThrmWdt : 1;
+ UINT32 MeUncErr : 1;
+ UINT32 AdrGpio : 1;
+ UINT32 OcwdtNoicc : 1;
+ UINT32 OcwdtIcc : 1;
+ UINT32 CseHecUncErr : 1;
+ UINT32 PmcSramUncErr : 1;
+ UINT32 PmcIromParity : 1;
+ UINT32 PmcRfFusaErr : 1;
+ UINT32 Reserved3 : 4;
+ UINT32 PpbrParityErr : 1;
+ UINT32 Reserved4 : 2;
+ } Field;
+ UINT32 Value;
+} PMC_GLOBAL_RESET_MASK;
+
+/**
+ The PCH_PM_CONFIG block describes expected miscellaneous power management settings.
+ The PowerResetStatusClear field would clear the Power/Reset status bits, please
+ set the bits if you want PCH Init driver to clear it, if you want to check the
+ status later then clear the bits.
+
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>
+ - Added C10DynamicThresholdAdjustment
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+
+ PCH_WAKE_CONFIG WakeConfig; ///< Specify Wake Policy
+ UINT32 PchDeepSxPol : 4; ///< Deep Sx Policy. Refer to PCH_DEEP_SX_CONFIG for each value. Default is <b>PchDeepSxPolDisable</b>.
+ UINT32 PchSlpS3MinAssert : 4; ///< SLP_S3 Minimum Assertion Width Policy. Refer to PCH_SLP_S3_MIN_ASSERT for each value. Default is <b>PchSlpS350ms</b>.
+ UINT32 PchSlpS4MinAssert : 4; ///< SLP_S4 Minimum Assertion Width Policy. Refer to PCH_SLP_S4_MIN_ASSERT for each value. Default is <b>PchSlpS44s</b>.
+ UINT32 PchSlpSusMinAssert : 4; ///< SLP_SUS Minimum Assertion Width Policy. Refer to PCH_SLP_SUS_MIN_ASSERT for each value. Default is <b>PchSlpSus4s</b>.
+ UINT32 PchSlpAMinAssert : 4; ///< SLP_A Minimum Assertion Width Policy. Refer to PCH_SLP_A_MIN_ASSERT for each value. Default is <b>PchSlpA2s</b>.
+ UINT32 RsvdBits0 : 12;
+ /**
+ This member describes whether or not the LPC ClockRun feature of PCH should
+ be enabled. <b>0: Disable</b>; 1: Enable
+ **/
+ UINT32 SlpStrchSusUp : 1; ///< <b>0: Disable</b>; 1: Enable SLP_X Stretching After SUS Well Power Up
+ /**
+ Enable/Disable SLP_LAN# Low on DC Power. 0: Disable; <b>1: Enable</b>.
+ Configure On DC PHY Power Diable according to policy SlpLanLowDc.
+ When this is enabled, SLP_LAN# will be driven low when ACPRESENT is low.
+ This indicates that LAN PHY should be powered off on battery mode.
+ This will override the DC_PP_DIS setting by WolEnableOverride.
+ **/
+ UINT32 SlpLanLowDc : 1;
+ /**
+ PCH power button override period.
+ 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s
+ <b>Default is 0: 4s</b>
+ **/
+ UINT32 PwrBtnOverridePeriod : 3;
+ /**
+ <b>(Test)</b>
+ Disable/Enable PCH to CPU enery report feature. <b>0: Disable</b>; 1: Enable.
+ Enery Report is must have feature. Wihtout Energy Report, the performance report
+ by workloads/benchmarks will be unrealistic because PCH's energy is not being accounted
+ in power/performance management algorithm.
+ If for some reason PCH energy report is too high, which forces CPU to try to reduce
+ its power by throttling, then it could try to disable Energy Report to do first debug.
+ This might be due to energy scaling factors are not correct or the LPM settings are not
+ kicking in.
+ **/
+ UINT32 DisableEnergyReport : 1;
+ /**
+ When set to Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit.
+ When set to Enable, PCH will not pull down AC_PRESENT.
+ This setting is ignored when DeepSx is not supported.
+ Default is <b>0:Disable</b>
+ **/
+ UINT32 DisableDsxAcPresentPulldown : 1;
+ /**
+ Power button native mode disable.
+ While FALSE, the PMC's power button logic will act upon the input value from the GPIO unit, as normal.
+ While TRUE, this will result in the PMC logic constantly seeing the power button as de-asserted.
+ <b>Default is FALSE.</b>
+ **/
+ UINT32 DisableNativePowerButton : 1;
+ UINT32 MeWakeSts : 1; ///< Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. 0: Disable; <b>1: Enable</b>.
+ UINT32 WolOvrWkSts : 1; ///< Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. 0: Disable; <b>1: Enable</b>.
+ /*
+ Set true to enable TCO timer.
+ When FALSE, it disables PCH ACPI timer, and stops TCO timer.
+ @note: This will have significant power impact when it's enabled.
+ If TCO timer is disabled, uCode ACPI timer emulation must be enabled,
+ and WDAT table must not be exposed to the OS.
+ <b>0: Disable</b>, 1: Enable
+ */
+ UINT32 EnableTcoTimer : 1;
+ /*
+ When VRAlert# feature pin is enabled and its state is '0',
+ the PMC requests throttling to a T3 Tstate to the PCH throttling unit.
+ <b>0: Disable</b>; 1: Enable.
+ */
+ UINT32 VrAlert : 1;
+ /**
+ Decide if PS_ON is to be enabled. This is available on desktop only.
+ PS_ON is a new C10 state from the CPU on desktop SKUs that enables a
+ lower power target that will be required by the California Energy
+ Commission (CEC). When FALSE, PS_ON is to be disabled.}
+ <b>0: Disable</b>; 1: Enable.
+ **/
+ UINT32 PsOnEnable : 1;
+ /**
+ Enable/Disable platform support for CPU_C10_GATE# pin to control gating
+ of CPU VccIO and VccSTG rails instead of SLP_S0# pin. This policy needs
+ to be set if board design includes support for CPU_C10_GATE# pin.
+ 0: Disable; <b>1: Enable</b>
+ **/
+ UINT32 CpuC10GatePinEnable : 1;
+ /**
+ Control whether to enable PMC debug messages to Trace Hub.
+ When Enabled, PMC HW will send debug messages to trace hub;
+ When Disabled, PMC HW will never send debug meesages to trace hub.
+ @note: When enabled, system may not enter S0ix
+ <b>0: Disable</b>; 1: Enable.
+ **/
+ UINT32 PmcDbgMsgEn : 1;
+ /**
+ Enable/Disable ModPHY SUS Power Domain Dynamic Gating.
+ EXT_PWR_GATE# signal (if supported on platform) can be used to
+ control external FET for power gating ModPHY
+ @note: This setting is not supported and ignored on PCH-H
+ 0: Disable; <b>1: Enable</b>.
+ **/
+ UINT32 ModPhySusPgEnable : 1;
+ /**
+ <b>(Test)</b>
+ This policy option enables USB2 PHY SUS Well Power Gating functionality.
+ @note: This setting is not supported and ignored on PCH-H
+ 0: disable USB2 PHY SUS Well Power Gating
+ <b>1: enable USB2 PHY SUS Well Power Gating</b>
+ **/
+ UINT32 Usb2PhySusPgEnable : 1;
+ /**
+ Enable Os Idle Mode.
+ 0: Disable; <b>1: Enable</b>.
+ **/
+ UINT32 OsIdleEnable : 1;
+ /**
+ Enable control using EXT_PWR_GATE# pin of external FET
+ to power gate v1p05-PHY
+ <b>0: Disable</b>; 1: Enable.
+ **/
+ UINT32 V1p05PhyExtFetControlEn : 1;
+ /**
+ Enable control using EXT_PWR_GATE2# pin of external FET
+ to power gate v1p05-IS supply
+ <b>0: Disable</b>; 1: Enable.
+ **/
+ UINT32 V1p05IsExtFetControlEn : 1;
+ /**
+ Enable/Disable the Low Power Mode Host S0ix Auto-Demotion
+ feature. This feature enables the PMC to autonomously manage
+ the deepest allowed S0ix substate to combat thrashing between
+ power management states.
+ 0: Disable; <b>1: Enable</b>.
+ **/
+ UINT32 S0ixAutoDemotion : 1;
+ /**
+ Enable/Disable Latch Events C10 Exit. When this bit is set to 1,
+ SLP_S0# entry events in SLP_S0_DEBUG_REGx registers are captured
+ on C10 exit (instead of C10 entry which is default)
+ <b>0: Disable</b>; 1: Enable.
+ **/
+ UINT32 LatchEventsC10Exit : 1;
+ UINT32 RsvdBits1 : 10;
+ /*
+ Power button debounce configuration
+ Debounce time can be specified in microseconds. Only certain values according
+ to below formula are supported:
+ DebounceTime = (2 ^ PADCFG_DW2.DEBOUNCE)*(glitch filter clock period).
+ RTC clock with f = 32 KHz is used for glitch filter.
+ DebounceTime = (2 ^ PADCFG_DW2.DEBOUNCE)*(31.25 us).
+ Supported DebounceTime values are following:
+ DebounceTime = 0 -> Debounce feature disabled
+ DebounceTime > 0 && < 250us -> Not supported
+ DebounceTime = 250us - 1024000us -> Supported range (DebounceTime = 250us * 2^n)
+ For values not supported by HW, they will be rounded down to closest supported one
+ <b>Default is 0</b>
+ */
+ UINT32 PowerButtonDebounce;
+ /**
+ Reset Power Cycle Duration could be customized in the unit of second. Please refer to EDS
+ for all support settings. PCH HW default is 4 seconds, and range is 1~4 seconds, where
+ <b>0 is default</b>, 1 is 1 second, 2 is 2 seconds, ... 4 is 4 seconds.
+ And make sure the setting correct, which never less than the following register.
+ - GEN_PMCON_B.SLP_S3_MIN_ASST_WDTH
+ - GEN_PMCON_B.SLP_S4_MIN_ASST_WDTH
+ - PWRM_CFG.SLP_A_MIN_ASST_WDTH
+ - PWRM_CFG.SLP_LAN_MIN_ASST_WDTH
+ **/
+ UINT8 PchPwrCycDur;
+ /**
+ Specifies the Pcie Pll Spread Spectrum Percentage
+ The value of this policy is in 1/10th percent units.
+ Valid spread range is 0-20. A value of 0xFF is reserved for AUTO.
+ A value of 0 is SSC of 0.0%. A value of 20 is SSC of 2.0%
+ The default is <b>0xFF: AUTO - No BIOS override</b>.
+ **/
+ UINT8 PciePllSsc;
+ /**
+ Tells BIOS to enable C10 dynamic threshold adjustment mode.
+ BIOS will only attemt to enable it on PCH SKUs which support it.
+ **/
+ UINT8 C10DynamicThresholdAdjustment;
+ UINT8 Rsvd0[1]; ///< Reserved bytes
+ /**
+ <b>(Test)</b>
+ Low Power Mode Enable/Disable config.
+ Configure if respective S0i2/3 sub-states are to be supported
+ by the platform. By default all sub-states are enabled but
+ for test purpose respective states can be disabled.
+ <b>Default is 0xFF</b>
+ **/
+ PMC_LPM_S0IX_SUB_STATE_EN LpmS0ixSubStateEnable;
+ /*
+ Set true to enable Timed GPIO 0 timer.
+ <b>0: Disable</b>, 1: Enable
+ */
+ UINT32 EnableTimedGpio0 : 1;
+ /*
+ Set true to enable Timed GPIO 1 timer.
+ <b>0: Disable</b>, 1: Enable
+ */
+ UINT32 EnableTimedGpio1 : 1;
+ UINT32 Rsvdbits : 30;
+
+ /**
+ Set true to enable override of Global Reset Event/Trigger masks.
+ Values from GlobalResetTriggerMask and GlobalResetEventMask will
+ be used as override value.
+ <b>0: Disable</b>, 1: Enable
+ **/
+ UINT8 GlobalResetMasksOverride;
+ UINT8 Rsvd1[3]; ///< Reserved bytes
+ /*
+ Mask for enabling Global Reset Trigger prevention
+ */
+ PMC_GLOBAL_RESET_MASK GlobalResetTriggerMask;
+ /*
+ Mask for enabling Global Reset Event prevention
+ */
+ PMC_GLOBAL_RESET_MASK GlobalResetEventMask;
+} PCH_PM_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _PM_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Psf/PsfConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Psf/PsfConfig.h
new file mode 100644
index 0000000000..033e416b83
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Psf/PsfConfig.h
@@ -0,0 +1,32 @@
+/** @file
+ Primary Sideband Fabric policy.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _PSF_CONFIG_H_
+#define _PSF_CONFIG_H_
+
+#define PSF_CONFIG_REVISION 1
+extern EFI_GUID gPsfConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ The PSF_CONFIG block describes the expected configuration of the Primary
+ Sideband Fabric.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ Psf Tcc (Time Coordinated Computing) Enable will decrease psf transaction latency by disable
+ some psf power management features. <b>0: Disable</b>; 1: Enable.
+ **/
+ UINT32 TccEnable : 1;
+ UINT32 RsvdBits0 : 31; ///< Reserved bits
+} PSF_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _PSF_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Rst/RstConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Rst/RstConfig.h
new file mode 100644
index 0000000000..469d46a205
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Rst/RstConfig.h
@@ -0,0 +1,82 @@
+/** @file
+ Rst policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _RST_CONFIG_H_
+#define _RST_CONFIG_H_
+#include <PchLimits.h>
+#include <ConfigBlock.h>
+
+#define RST_CONFIG_REVISION 1
+extern EFI_GUID gRstConfigGuid;
+
+#pragma pack (push,1)
+
+typedef enum {
+ SataOromDelay2sec,
+ SataOromDelay4sec,
+ SataOromDelay6sec,
+ SataOromDelay8sec
+} SATA_OROM_DELAY;
+
+/**
+ This structure describes the details of Intel RST for PCIe Storage remapping
+ Note: In order to use this feature, Intel RST Driver is required
+**/
+typedef struct {
+ /**
+ This member describes whether or not the Intel RST for PCIe Storage remapping should be enabled. <b>0: Disable</b>; 1: Enable.
+ Note 1: If Sata Controller is disabled, PCIe Storage Remapping should be disabled as well
+ Note 2: If PCIe Storage remapping is enabled, the PCH integrated AHCI controllers Class Code is configured as RAID
+ **/
+ UINT32 Enable : 1;
+ /**
+ Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, <b>0 = autodetect</b>)
+ The supported ports for PCIe Storage remapping is different depend on the platform and cycle router
+ **/
+ UINT32 RstPcieStoragePort : 5;
+ /**
+ PCIe Storage Device Reset Delay in milliseconds (ms), which it guarantees such delay gap is fulfilled
+ before PCIe Storage Device configuration space is accessed after an reset caused by the link disable and enable step.
+ Default value is <b>100ms</b>.
+ **/
+ UINT32 DeviceResetDelay : 8;
+ UINT32 RsvdBits0 : 18; ///< Reserved bits
+
+} RST_HARDWARE_REMAPPED_STORAGE_CONFIG;
+
+/**
+ Rapid Storage Technology settings.
+
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+
+ UINT32 Raid0 : 1; ///< 0 : Disable; <b>1 : Enable</b> RAID0
+ UINT32 Raid1 : 1; ///< 0 : Disable; <b>1 : Enable</b> RAID1
+ UINT32 Raid10 : 1; ///< 0 : Disable; <b>1 : Enable</b> RAID10
+ UINT32 Raid5 : 1; ///< 0 : Disable; <b>1 : Enable</b> RAID5
+ UINT32 Irrt : 1; ///< 0 : Disable; <b>1 : Enable</b> Intel Rapid Recovery Technology
+ UINT32 OromUiBanner : 1; ///< 0 : Disable; <b>1 : Enable</b> OROM UI and BANNER
+ UINT32 OromUiDelay : 2; ///< <b>00b : 2 secs</b>; 01b : 4 secs; 10b : 6 secs; 11 : 8 secs (see : SATA_OROM_DELAY)
+ UINT32 HddUnlock : 1; ///< 0 : Disable; <b>1 : Enable</b>. Indicates that the HDD password unlock in the OS is enabled
+ UINT32 LedLocate : 1; ///< 0 : Disable; <b>1 : Enable</b>. Indicates that the LED/SGPIO hardware is attached and ping to locate feature is enabled on the OS
+ UINT32 IrrtOnly : 1; ///< 0 : Disable; <b>1 : Enable</b>. Allow only IRRT drives to span internal and external ports
+ UINT32 SmartStorage : 1; ///< 0 : Disable; <b>1 : Enable</b> RST Smart Storage caching Bit
+ UINT32 LegacyOrom : 1; ///< <b>0 : Disable</b>; 1 : Enable RST Legacy OROM
+ UINT32 OptaneMemory : 1; ///< 0: Disable; <b>1: Enable</b> RST Optane(TM) Memory
+ UINT32 CpuAttachedStorage : 1; ///< 0: Disable; <b>1: Enable</b> CPU Attached Storage
+ UINT32 RsvdBits0 : 17; ///< Reserved Bits
+ /**
+ This member describes the details of implementation of Intel RST for PCIe Storage remapping (Intel RST Driver is required)
+ Note: RST for PCIe Sorage remapping is supported only for first SATA controller if more controllers are available
+ **/
+ RST_HARDWARE_REMAPPED_STORAGE_CONFIG HardwareRemappedStorageConfig[PCH_MAX_RST_PCIE_STORAGE_CR];
+} RST_CONFIG;
+
+#pragma pack (pop)
+#endif
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h
new file mode 100644
index 0000000000..1f354c10ae
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h
@@ -0,0 +1,38 @@
+/** @file
+ RTC policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _RTC_CONFIG_H_
+#define _RTC_CONFIG_H_
+
+#define RTC_CONFIG_REVISION 1
+extern EFI_GUID gRtcConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ The RTC_CONFIG block describes the expected configuration of RTC configuration.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ When set, prevents RTC TS (BUC.TS) from being changed.
+ This BILD bit has different function compared to LPC/eSPI, SPI.
+ 0: Disabled; <b>1: Enabled</b>
+ **/
+ UINT32 BiosInterfaceLock : 1;
+ /**
+ When set, bytes 38h-3Fh in the upper 128bytes bank of RTC RAM are locked
+ and cannot be accessed.
+ Writes will be droipped and reads will not return any guaranteed data.
+ 0: Disabled; <b>1: Enabled</b>
+ **/
+ UINT32 MemoryLock : 1;
+ UINT32 RsvdBits0 : 30;
+} RTC_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _RTC_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Sata/SataConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Sata/SataConfig.h
new file mode 100644
index 0000000000..c560fdd3ab
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Sata/SataConfig.h
@@ -0,0 +1,168 @@
+/** @file
+ Sata policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _SATA_CONFIG_H_
+#define _SATA_CONFIG_H_
+
+#include <PchLimits.h>
+
+#define SATA_CONFIG_REVISION 1
+extern EFI_GUID gSataConfigGuid;
+
+#pragma pack (push,1)
+
+typedef enum {
+ SataModeAhci,
+ SataModeRaid,
+ SataModeMax
+} SATA_MODE;
+
+typedef enum {
+ SataSpeedDefault,
+ SataSpeedGen1,
+ SataSpeedGen2,
+ SataSpeedGen3
+} SATA_SPEED;
+
+typedef enum {
+ SataRstMsix,
+ SataRstMsi,
+ SataRstLegacy
+} SATA_RST_INTERRUPT;
+
+typedef enum {
+ SataRaidClient,
+ SataRaidAlternate,
+ SataRaidServer
+} SATA_RAID_DEV_ID;
+
+/**
+ This structure configures the features, property, and capability for each SATA port.
+**/
+typedef struct {
+ /**
+ Enable SATA port.
+ It is highly recommended to disable unused ports for power savings
+ **/
+ UINT32 Enable : 1; ///< 0: Disable; <b>1: Enable</b>
+ UINT32 HotPlug : 1; ///< <b>0: Disable</b>; 1: Enable
+ UINT32 InterlockSw : 1; ///< <b>0: Disable</b>; 1: Enable
+ UINT32 External : 1; ///< <b>0: Disable</b>; 1: Enable
+ UINT32 SpinUp : 1; ///< <b>0: Disable</b>; 1: Enable the COMRESET initialization Sequence to the device
+ UINT32 SolidStateDrive : 1; ///< <b>0: HDD</b>; 1: SSD
+ UINT32 DevSlp : 1; ///< <b>0: Disable</b>; 1: Enable DEVSLP on the port
+ UINT32 EnableDitoConfig : 1; ///< <b>0: Disable</b>; 1: Enable DEVSLP Idle Timeout settings (DmVal, DitoVal)
+ UINT32 DmVal : 4; ///< DITO multiplier. Default is <b>15</b>.
+ UINT32 DitoVal : 10; ///< DEVSLP Idle Timeout (DITO), Default is <b>625</b>.
+ /**
+ Support zero power ODD <b>0: Disable</b>, 1: Enable.
+ This is also used to disable ModPHY dynamic power gate.
+ **/
+ UINT32 ZpOdd : 1;
+ UINT32 DevSlpResetConfig : 4; ///< 0: Hardware default; <b>0x01: GpioResumeReset</b>; 0x03: GpioHostDeepReset; 0x05: GpioPlatformReset; 0x07: GpioDswReset
+ UINT32 SataPmPtm : 1; ///< Deprecated
+ UINT32 RxPolarity : 1; ///< <b>0: Disable</b>; 1: Enable; Rx Polarity
+ UINT32 RsvdBits0 : 3; ///< Reserved fields for future expansion w/o protocol change
+} PCH_SATA_PORT_CONFIG;
+
+/**
+ This structure lists PCH supported SATA thermal throttling register setting for customization.
+ The settings is programmed through SATA Index/Data registers.
+ When the SuggestedSetting is enabled, the customized values are ignored.
+**/
+typedef struct {
+ UINT32 P0T1M : 2; ///< Port 0 T1 Multipler
+ UINT32 P0T2M : 2; ///< Port 0 T2 Multipler
+ UINT32 P0T3M : 2; ///< Port 0 T3 Multipler
+ UINT32 P0TDisp : 2; ///< Port 0 Tdispatch
+
+ UINT32 P1T1M : 2; ///< Port 1 T1 Multipler
+ UINT32 P1T2M : 2; ///< Port 1 T2 Multipler
+ UINT32 P1T3M : 2; ///< Port 1 T3 Multipler
+ UINT32 P1TDisp : 2; ///< Port 1 Tdispatch
+
+ UINT32 P0Tinact : 2; ///< Port 0 Tinactive
+ UINT32 P0TDispFinit : 1; ///< Port 0 Alternate Fast Init Tdispatch
+ UINT32 P1Tinact : 2; ///< Port 1 Tinactive
+ UINT32 P1TDispFinit : 1; ///< Port 1 Alternate Fast Init Tdispatch
+ UINT32 SuggestedSetting : 1; ///< 0: Disable; <b>1: Enable</b> suggested representative values
+ UINT32 RsvdBits0 : 9; ///< Reserved bits
+} SATA_THERMAL_THROTTLING;
+
+/**
+ The SATA_CONFIG block describes the expected configuration of the SATA controllers.
+
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ ///
+ /// This member describes whether or not the SATA controllers should be enabled. 0: Disable; <b>1: Enable</b>.
+ ///
+ UINT8 Enable;
+ UINT8 TestMode; ///< <b>(Test)</b> <b>0: Disable</b>; 1: Allow entrance to the PCH SATA test modes
+ UINT8 SalpSupport; ///< 0: Disable; <b>1: Enable</b> Aggressive Link Power Management
+ UINT8 PwrOptEnable; ///< 0: Disable; <b>1: Enable</b> SATA Power Optimizer on PCH side.
+ /**
+ EsataSpeedLimit
+ When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed.
+ Please be noted, this setting could be cleared by HBA reset, which might be issued
+ by EFI AHCI driver when POST time, or by SATA inbox driver/RST driver after POST.
+ To support the Speed Limitation when POST, the EFI AHCI driver should preserve the
+ setting before and after initialization. For support it after POST, it's dependent on
+ driver's behavior.
+ <b>0: Disable</b>; 1: Enable
+ **/
+ UINT8 EsataSpeedLimit;
+ UINT8 LedEnable; ///< SATA LED indicates SATA controller activity. 0: Disable; <b>1: Enable</b> SATA LED.
+ /**
+ This option allows to configure SATA controller device ID while in RAID mode.
+ Refer to SATA_RAID_DEV_ID enumeration for supported options.
+ Choosing Client will allow RST driver loading, RSTe driver will not be able to load
+ Choosing Alternate will not allow RST inbox driver loading in Windows
+ Choosing Server will allow RSTe driver loading, RST driver will not load
+ <b>0: Client</b>; 1: Alternate; 2: Server
+ **/
+ UINT8 RaidDeviceId;
+ /**
+ Controlls which interrupts will be linked to SATA controller CAP list
+ This option will take effect only if SATA controller is in RAID mode
+ Default: <b>PchSataMsix</b>
+ **/
+ UINT8 SataRstInterrupt;
+
+ /**
+ Determines the system will be configured to which SATA mode.
+ Refer to SATA_MODE enumeration for supported options. Default is <b>SataModeAhci</b>.
+ **/
+ UINT8 SataMode;
+ /**
+ Indicates the maximum speed the SATA controller can support.
+ Refer to SATA_SPEED enumeration for supported options.
+ <b>0h: SataSpeedDefault</b>; 1h: 1.5 Gb/s (Gen 1); 2h: 3 Gb/s(Gen 2); 3h: 6 Gb/s (Gen 1)
+ **/
+ UINT8 SpeedLimit;
+ UINT8 EnclosureSupport; ///< Enclosure Management Support. 0: Disable; 1: Enable
+ /**
+ Controlls whenever Serial GPIO support is enabled for controller
+ <b>0: Disable</b>; 1: Enable
+ **/
+ UINT8 SgpioSupport;
+ /**
+ This member configures the features, property, and capability for each SATA port.
+ **/
+ PCH_SATA_PORT_CONFIG PortSettings[PCH_MAX_SATA_PORTS];
+ /**
+ This field decides the settings of Sata thermal throttling. When the Suggested Setting
+ is enabled, PCH RC will use the suggested representative values.
+ **/
+ SATA_THERMAL_THROTTLING ThermalThrottling;
+} SATA_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _SATA_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Scs/ScsConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Scs/ScsConfig.h
new file mode 100644
index 0000000000..2ebc901896
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Scs/ScsConfig.h
@@ -0,0 +1,139 @@
+/** @file
+ Scs policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _SCS_CONFIG_H_
+#define _SCS_CONFIG_H_
+
+#include <ConfigBlock.h>
+#include <PchLimits.h>
+
+#define SCS_SDCARD_CONFIG_REVISION 1
+#define SCS_EMMC_CONFIG_REVISION 1
+#define SCS_EMMC_DXE_CONFIG_REVISION 1
+#define SCS_SDCARD_MAX_DATA_GPIOS 4
+#define SCS_EMMC_MAX_DATA_GPIOS 8
+extern EFI_GUID gSdCardConfigGuid;
+extern EFI_GUID gEmmcConfigGuid;
+extern EFI_GUID gUfsConfigGuid;
+extern EFI_GUID gEmmcDxeConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This structre holds the DLL configuration
+ register values that will be programmed by RC
+ if EnableCustomDlls field is set to TRUE. Those
+ policies should be used by platform if default values
+ provided by RC are not sufficient to provide stable operation
+ at all supported spped modes. RC will blindly set the DLL values
+ as provided in this structre.
+
+ For help with obtaining valid DLL values for your platform please
+ contact enabling support.
+**/
+typedef struct {
+ UINT32 TxCmdDelayControl; // Offset 820h: Tx CMD Delay Control
+ UINT32 TxDataDelayControl1; // Offset 824h: Tx Data Delay Control 1
+ UINT32 TxDataDelayControl2; // Offset 828h: Tx Data Delay Control 2
+ UINT32 RxCmdDataDelayControl1; // Offset 82Ch: Rx CMD + Data Delay Control 1
+ UINT32 RxCmdDataDelayControl2; // Offset 834h: Rx CMD + Data Delay Control 2
+ UINT32 RxStrobeDelayControl; // Offset 830h: Rx Strobe Delay Control, valid only for eMMC
+} SCS_SD_DLL;
+
+/**
+ SD GPIO settings
+**/
+typedef struct {
+ /**
+ GPIO signals pin muxing settings. If signal can be enable only on a single pin
+ then this parameter should be set to 0. Refer to GPIO_*_MUXING_SDCARD_*x_* in GpioPins*.h
+ for supported settings on a given platform
+ **/
+ UINT32 PinMux;
+ /**
+ GPIO Pads Internal Termination.
+ For more information please see Platform Design Guide.
+ Check GPIO_ELECTRICAL_CONFIG for reference
+ **/
+ UINT32 PadTermination;
+} MUX_GPIO_PARAM;
+
+typedef struct {
+ MUX_GPIO_PARAM PowerEnable;
+ MUX_GPIO_PARAM Cmd;
+ MUX_GPIO_PARAM Data[SCS_SDCARD_MAX_DATA_GPIOS];
+ MUX_GPIO_PARAM Cdb;
+ MUX_GPIO_PARAM Clk;
+ MUX_GPIO_PARAM Wp;
+} SCS_SDCARD_GPIO_CONFIG;
+
+typedef struct {
+ MUX_GPIO_PARAM Cmd;
+ MUX_GPIO_PARAM Data[SCS_EMMC_MAX_DATA_GPIOS];
+ MUX_GPIO_PARAM Rclk;
+ MUX_GPIO_PARAM Clk;
+ MUX_GPIO_PARAM Resetb;
+} SCS_EMMC_GPIO_CONFIG;
+
+typedef struct {
+ CONFIG_BLOCK_HEADER Header;
+
+ UINT32 Enable : 1; ///< Enable/Disable SdCard 0: Disabled, <b>1: Enabled</b>
+ UINT32 PowerEnableActiveHigh : 1; ///< Determine SD_PWREN# polarity 0: Active low, <b>1: Active high</b>
+ UINT32 UseCustomDlls : 1; ///< Use tuned DLL values from policy <b>0: Use default DLL</b>, 1: Use values from TunedDllValues field
+ UINT32 Reserved : 29;
+ SCS_SD_DLL CustomDllValues; ///< Structure containing custom DLL values for SD card
+ SCS_SDCARD_GPIO_CONFIG GpioConfig;
+} SCS_SDCARD_CONFIG;
+
+typedef struct {
+ UINT32 Hs400RxValue : 7; ///< Value of the tuned HS400 Rx value
+ UINT32 Hs400TxValue : 7; ///< Value of the tuned HS400 Tx value
+ UINT32 Reserved : 18;
+} SCS_EMMC_TUNED_DLL;
+
+typedef struct {
+ CONFIG_BLOCK_HEADER Header;
+
+ UINT32 Enable : 1; ///< Enable/Disable eMMC 0: Disabled, <b>1: Enabled</b>
+ UINT32 Hs400Supported : 1; ///< Enable/Disable eMMC HS400 support 0: Disabled, <b>1: Enabled</b>
+ UINT32 UseCustomDlls : 1; ///< Use custom DLL values from policy <b>0: Use default DLL</b>, 1: Use values from TunedDllValues field
+ UINT32 Reserved : 29;
+ SCS_SD_DLL CustomDllValues; ///< Structure containing custom DLL values for eMMC ///< Structure containing tuned DLL settings for eMMC
+ SCS_EMMC_GPIO_CONFIG GpioConfig;
+} SCS_EMMC_CONFIG;
+
+typedef enum {
+ DriverStrength33Ohm = 0,
+ DriverStrength40Ohm,
+ DriverStrength50Ohm
+} SCS_EMMC_DRIVER_STRENGTH;
+
+typedef struct {
+ UINT32 TuningSuccessful : 1; ///< Informs software tuning module about previous software tuning status.
+ UINT32 Hs400RxValue : 7; ///< Value of the tuned HS400 Rx value returned from software tuning module
+ UINT32 Hs400TxValue : 7; ///< Value of the tuned HS400 Tx value returned from software tuning module
+ UINT32 Reserved : 17;
+} SCS_EMMC_SOFTWARE_TUNING_RESULTS;
+
+typedef struct {
+ CONFIG_BLOCK_HEADER Header;
+
+ UINT32 EnableSoftwareHs400Tuning : 1; ///< Enable/Disable software eMMC HS400 tuning: <b>0 - Disable</b>, 1 - Enable
+ UINT32 DriverStrength : 2; ///< I/O driver strength: 0 - 33 Ohm, <b>1 - 40 Ohm</b>, 2 - 50 Ohm
+ UINT32 Reserved : 29;
+ EFI_LBA TuningLba; ///< Specifies LBA which will be used during software tuning process.
+ SCS_EMMC_SOFTWARE_TUNING_RESULTS PreviousTuningResults; ///< Informes software tuning module about previous software tuning results.} SCS_EMMC_DXE_CONFIG;
+} SCS_EMMC_DXE_CONFIG;
+
+typedef struct {
+ UINT32 Enable : 1; ///< Enable/Disable UFS controller 0: Disabled, <b>1: Enabled</b>
+ UINT32 Reserved : 31;
+} SCS_UFS_CONTROLLER_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _SCS_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h
new file mode 100644
index 0000000000..d76937cf59
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h
@@ -0,0 +1,32 @@
+/** @file
+ Serial IO policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _SERIAL_IO_CONFIG_H_
+#define _SERIAL_IO_CONFIG_H_
+
+#define SERIAL_IO_CONFIG_REVISION 1
+extern EFI_GUID gSerialIoConfigGuid;
+
+#include <SerialIoDevices.h>
+
+#pragma pack (push,1)
+
+/**
+ The SERIAL_IO_CONFIG block provides the configurations to set the Serial IO controllers
+
+ <b>Revision 1:</b>
+ - Inital version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ SERIAL_IO_SPI_CONFIG SpiDeviceConfig[PCH_MAX_SERIALIO_SPI_CONTROLLERS]; ///< SPI Configuration
+ SERIAL_IO_I2C_CONFIG I2cDeviceConfig[PCH_MAX_SERIALIO_I2C_CONTROLLERS]; ///< I2C Configuration
+ SERIAL_IO_UART_CONFIG UartDeviceConfig[PCH_MAX_SERIALIO_UART_CONTROLLERS]; ///< UART Configuration
+} SERIAL_IO_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _SERIAL_IO_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SiConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SiConfig.h
new file mode 100644
index 0000000000..7ee4554b1d
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SiConfig.h
@@ -0,0 +1,152 @@
+/** @file
+ Si Config Block
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _SI_CONFIG_H_
+#define _SI_CONFIG_H_
+
+#define SI_CONFIG_REVISION 2
+
+extern EFI_GUID gSiConfigGuid;
+
+
+#pragma pack (push,1)
+
+/**
+ The Silicon Policy allows the platform code to publish a set of configuration
+ information that the RC drivers will use to configure the silicon hardware.
+
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Added TraceHubMemBase
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0 - 27 Config Block Header
+ //
+ // Platform specific common policies that used by several silicon components.
+ //
+ UINT8 CsmFlag; ///< CSM status flag.
+ /**
+ This is used to skip the SSID programming in silicon code.
+ When set to TRUE, silicon code will not do any SSID programming and platform code
+ needs to handle that by itself properly.
+ <b>0: FALSE</b>, 1: TRUE
+ **/
+ UINT8 SkipSsidProgramming;
+ UINT8 RsvdBytes0[2];
+ /**
+ When SkipSsidProgramming is FALSE, silicon code will use this as default value
+ to program the SVID for all internal devices.
+ <b>0: use silicon default SVID 0x8086 </b>, Non-zero: use customized SVID.
+ **/
+ UINT16 CustomizedSvid;
+ /**
+ When SkipSsidProgramming is FALSE, silicon code will use this as default value
+ to program the Sid for all internal devices.
+ <b>0: use silicon default SSID 0x7270 </b>, Non-zero: use customized SSID.
+ **/
+ UINT16 CustomizedSsid;
+ /**
+ SsidTablePtr contains the SVID_SID_INIT_ENTRY table.
+ This is valid when SkipSsidProgramming is FALSE;
+ It doesn't need to contain entries for all Intel internal devices.
+ It can only contains the SVID_SID_INIT_ENTRY entries for those Dev# Func# which needs
+ to be overridden.
+ In the enties, only Dev, Function, SubSystemVendorId, and SubSystemId are required.
+ <b>Default is NULL.</b>
+
+ E.g. Platform only needs to override BDF 0:31:5 to AAAA:BBBB and BDF 0:31:3 to CCCC:DDDD,
+ it can be done in platform like this:
+ STATIC SVID_SID_INIT_ENTRY mSsidTablePtr[SI_MAX_DEVICE_COUNT] = {0};
+
+ VOID SiPolicyUpdate () {
+ UINT32 EntryCount = 0;
+ SiPolicy->SkipSsidProgramming = FALSE;
+ SiPolicy->SsidTablePtr = mSsidTablePtr;
+
+ mSsidTablePtr[EntryCount].Address.Bits.Device = SpiDeviceNumber ();
+ mSsidTablePtr[EntryCount].Address.Bits.Function = SpiFunctionNumber ();
+ mSsidTablePtr[EntryCount].SvidSidValue.SubSystemVendorId = 0xAAAA;
+ mSsidTablePtr[EntryCount].SvidSidValue.SubSystemId = 0xBBBB;
+ EntryCount ++;
+ mSsidTablePtr[EntryCount].Address.Bits.Device = HdaDevNumber ();
+ mSsidTablePtr[EntryCount].Address.Bits.Function = HdaFuncNumber ();
+ mSsidTablePtr[EntryCount].SvidSidValue.SubSystemVendorId = 0xCCCC;
+ mSsidTablePtr[EntryCount].SvidSidValue.SubSystemId = 0xDDDD;
+ EntryCount ++;
+ ASSERT (EntryCount < SI_MAX_DEVICE_COUNT);
+ SiPolicy->NumberOfSsidTableEntry = EntryCount;
+ }
+ **/
+ UINT32 *SsidTablePtr;
+ /**
+ Number of valid enties in SsidTablePtr.
+ This is valid when SkipSsidProgramming is FALSE;
+ <b>Default is 0.</b>
+ **/
+ UINT16 NumberOfSsidTableEntry;
+ UINT8 RsvdBytes1[2];
+ /**
+ If Trace Hub is enabled and trace to memory is desired, Platform code or BootLoader needs to allocate trace hub memory
+ as reserved, and save allocated memory base to TraceHubMemBase to ensure Trace Hub memory is configured properly.
+ To get total trace hub memory size please refer to TraceHubCalculateTotalBufferSize ()
+
+ Noted: If EDKII memory service is used to allocate memory, it will require double memory size to support size-aligned memory allocation,
+ so Platform code or FSP Wrapper code should ensure enough memory available for size-aligned TraceHub memory allocation.
+ **/
+ UINT32 TraceHubMemBase; // Offset 58
+ /**
+ This is used to skip setting BIOS_DONE MSR during firmware update boot mode.
+ When set to TRUE and boot mode is BOOT_ON_FLASH_UPDATE,
+ skip setting BIOS_DONE MSR at EndofPei.
+ <b>0: FALSE</b>, 1: TRUE
+ **/
+ UINT8 SkipBiosDoneWhenFwUpdate;
+ UINT8 RsvdBytes2[3];
+} SI_CONFIG;
+
+#pragma pack (pop)
+
+#define DEFAULT_SSVID 0x8086
+#define DEFAULT_SSDID 0x7270
+#define SI_MAX_DEVICE_COUNT 70
+
+///
+/// Subsystem Vendor ID / Subsystem ID
+///
+typedef struct {
+ UINT16 SubSystemVendorId;
+ UINT16 SubSystemId;
+} SVID_SID_VALUE;
+
+//
+// Below is to match PCI_SEGMENT_LIB_ADDRESS () which can directly send to PciSegmentRead/Write functions.
+//
+typedef struct {
+ union {
+ struct {
+ UINT32 Register:12;
+ UINT32 Function:3;
+ UINT32 Device:5;
+ UINT32 Bus:8;
+ UINT32 Reserved1:4;
+ UINT32 Segment:16;
+ UINT32 Reserved2:16;
+ } Bits;
+ UINT64 SegBusDevFuncRegister;
+ } Address;
+ SVID_SID_VALUE SvidSidValue;
+ UINT32 Reserved;
+} SVID_SID_INIT_ENTRY;
+
+
+typedef struct {
+ UINT32 SkipBus;
+ UINT32 SkipDevice;
+ UINT32 SkipFunction;
+} SVID_SID_SKIP_TABLE;
+
+#endif // _SI_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h
new file mode 100644
index 0000000000..4bf014e9ba
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h
@@ -0,0 +1,67 @@
+/** @file
+ Si Config Block PreMem
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _SI_PREMEM_CONFIG_H_
+#define _SI_PREMEM_CONFIG_H_
+
+#define SI_PREMEM_CONFIG_REVISION 1
+
+extern EFI_GUID gSiPreMemConfigGuid;
+
+typedef enum {
+ ProbeTypeDisabled = 0x00,
+ ProbeTypeDciOob = 0x02,
+ ProbeTypeUsb3Dbc = 0x03,
+ ProbeTypeXdp3 = 0x04,
+ ProbeTypeUsb2Dbc = 0x05,
+ ProbeType2WireDciOob = 0x06,
+ ProbeTypeManual = 0x07,
+ ProbeTypeMax
+} PLATFORM_DEBUG_CONSENT_PROBE_TYPE;
+
+#pragma pack (push,1)
+/**
+ The Silicon PreMem Policy allows the platform code to publish a set of configuration
+ information that the RC drivers will use to configure the silicon hardware.
+
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0 - 27 Config Block Header
+ /**
+ Platform Debug Consent
+ As a master switch to enable platform debug capability and relevant settings with specified probe type.
+ Manual: Do not use Platform Debug Consent to override other debug-relevant policies, but the user must set each debug option manually, aimed at advanced users.
+
+ PDC-dependent policies are listed:
+ DciPreMemConfig->DciEn
+ DciPreMemConfig->DciDbcMode
+ CpuTraceHubConfig->EnableMode
+ CpuTraceHubConfig->CpuTraceHubMemReg0Size
+ CpuTraceHubConfig->CpuTraceHubMemReg1Size
+ PchTraceHubPreMemConfig->EnableMode
+ PchTraceHubPreMemConfig->MemReg0Size
+ PchTraceHubPreMemConfig->MemReg1Size
+
+ Note: DCI OOB (aka BSSB) uses CCA probe.
+ Refer to definition of PLATFORM_DEBUG_CONSENT_PROBE_TYPE
+ <b>0:Disabled</b>; 2:DCI OOB; 3:USB3 DbC; 4:XDP3/MIPI60 5:USB2 DbC; 6:2-wire DCI OOB; 7:Manual
+ **/
+ UINT32 PlatformDebugConsent : 4;
+ UINT32 RsvdBits : 28;
+ /**
+ This is used to skip override boot mode during firmware update boot mode.
+ When set to TRUE and boot mode is BOOT_ON_FLASH_UPDATE,
+ skip setting boot mode to BOOT_WITH_FULL_CONFIGURATION in PEI memory init.
+ <b>0: FALSE</b>, 1: TRUE
+ **/
+ UINT8 SkipOverrideBootModeWhenFwUpdate;
+ UINT8 RsvdBytes[3];
+} SI_PREMEM_CONFIG;
+
+#pragma pack (pop)
+#endif // _SI_PREMEM_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h
new file mode 100644
index 0000000000..36f96a4f32
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h
@@ -0,0 +1,50 @@
+/** @file
+ Smbus policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _SMBUS_CONFIG_H_
+#define _SMBUS_CONFIG_H_
+
+#define SMBUS_PREMEM_CONFIG_REVISION 1
+extern EFI_GUID gSmbusPreMemConfigGuid;
+
+#pragma pack (push,1)
+
+#define PCH_MAX_SMBUS_RESERVED_ADDRESS 128
+
+///
+/// The SMBUS_CONFIG block lists the reserved addresses for non-ARP capable devices in the platform.
+///
+typedef struct {
+ /**
+ Revision 1: Init version
+ **/
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ This member describes whether or not the SMBus controller of PCH should be enabled.
+ 0: Disable; <b>1: Enable</b>.
+ **/
+ UINT32 Enable : 1;
+ UINT32 ArpEnable : 1; ///< Enable SMBus ARP support, <b>0: Disable</b>; 1: Enable.
+ UINT32 DynamicPowerGating : 1; ///< <b>(Test)</b> <b>Disable</b> or Enable Smbus dynamic power gating.
+ ///
+ /// <b>(Test)</b> SPD Write Disable, 0: leave SPD Write Disable bit; <b>1: set SPD Write Disable bit.</b>
+ /// For security recommendations, SPD write disable bit must be set.
+ ///
+ UINT32 SpdWriteDisable : 1;
+ UINT32 SmbAlertEnable : 1; ///< Enable SMBus Alert pin (SMBALERT#). 0: <b>Disabled<b>, 1: Enabled.
+ UINT32 RsvdBits0 : 27; ///< Reserved bits
+ UINT16 SmbusIoBase; ///< SMBUS Base Address (IO space). Default is <b>0xEFA0</b>.
+ UINT8 Rsvd0; ///< Reserved bytes
+ UINT8 NumRsvdSmbusAddresses; ///< The number of elements in the RsvdSmbusAddressTable.
+ /**
+ Array of addresses reserved for non-ARP-capable SMBus devices.
+ **/
+ UINT8 RsvdSmbusAddressTable[PCH_MAX_SMBUS_RESERVED_ADDRESS];
+} PCH_SMBUS_PREMEM_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _SMBUS_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Spi/SpiConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Spi/SpiConfig.h
new file mode 100644
index 0000000000..f3e52ff453
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Spi/SpiConfig.h
@@ -0,0 +1,43 @@
+/** @file
+ PCH SPI Flash Controller config block
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SPI_CONFIG_H_
+#define _SPI_CONFIG_H_
+
+#define SPI_CONFIG_REVISION 1
+extern EFI_GUID gSpiConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ Basic configuration for option features of PCH SPI Flash controller
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ Enable extended BIOS Direct Read Region feature
+ Enabling this will make all memory accesses in a decode range to be translated
+ to BIOS region reads from SPI flash
+ <b>0: Disabled</b>, 1: Enabled
+ **/
+ UINT32 ExtendedBiosDecodeRangeEnable : 1;
+ UINT32 RsvdBits0 : 31; ///< Reserved bits
+ /**
+ Base address that will be used for Extended Decode Range.
+ This will be ignored when ExtendedBiosDecodeRangeEnable is set to 0.
+ **/
+ UINT32 ExtendedBiosDecodeRangeBase;
+ /**
+ Limit address that will be used for Extended Decode Range.
+ This will be ignored when ExtendedBiosDecodeRangeEnable is set to 0.
+ **/
+ UINT32 ExtendedBiosDecodeRangeLimit;
+} SPI_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _SPI_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h
new file mode 100644
index 0000000000..53af4ccd45
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h
@@ -0,0 +1,145 @@
+/** @file
+ TCSS PEI policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _TCSS_PEI_CONFIG_H_
+#define _TCSS_PEI_CONFIG_H_
+
+#include <ConfigBlock.h>
+#include <UsbConfig.h>
+#include <TcssInfo.h>
+
+#define TCSS_PEI_CONFIG_REVISION 2
+extern EFI_GUID gTcssPeiConfigGuid;
+
+#pragma pack (push,1)
+
+
+#define MAX_IOM_AUX_BIAS_COUNT 4
+
+///
+/// The IOM_AUX_ORI_PAD_CONFIG describes IOM TypeC port map GPIO pin.
+/// Those GPIO setting for DP Aux Orientation Bias Control when the TypeC port didn't have re-timer.
+/// IOM needs know Pull-Up and Pull-Down pin for Bias control
+///
+typedef struct {
+ UINT32 GpioPullN; ///< GPIO Pull Up Ping number that is for IOM indecate the pull up pin from TypeC port.
+ UINT32 GpioPullP; ///< GPIO Pull Down Ping number that is for IOM indecate the pull down pin from TypeC port.
+} IOM_AUX_ORI_PAD_CONFIG;
+
+///
+/// The IOM_EC_INTERFACE_CONFIG block describes interaction between BIOS and IOM-EC.
+///
+
+typedef struct {
+ UINT32 VccSt; ///< IOM VCCST request. (Not equal to actual VCCST value)
+ UINT32 UsbOverride; ///< IOM to override USB connection.
+ UINT32 D3ColdEnable; ///< Enable/disable D3 Cold support in TCSS
+ UINT32 D3HotEnable; ///< Enable/disable D3 Hot support in TCSS
+} IOM_INTERFACE_CONFIG;
+
+///
+/// The PMC_INTERFACE_CONFIG block describes interaction between BIOS and PMC
+///
+typedef struct {
+ UINT8 PmcPdEnable; ///< PMC PD Solution Enable
+ UINT8 Rsvd[3];
+} PMC_INTERFACE_CONFIG;
+
+///
+/// The SA XDCI INT Pin and IRQ number
+///
+typedef struct {
+ UINT8 IntPing; ///< Int Pin Number
+ UINT8 Irq; ///< Irq Number
+ UINT16 Rsvd;
+} SA_XDCI_IRQ_INT_CONFIG;
+
+///
+/// The TCSS_PCIE_PORT_POLICY block describes PCIe settings for TCSS.
+///
+typedef struct {
+ UINT8 AcsEnabled; ///< Indicate whether the ACS is enabled. 0: Disable; <b>1: Enable</b>.
+ UINT8 DpcEnabled; ///< Downstream Port Containment. 0: Disable; <b>1: Enable</b>
+ UINT8 RpDpcExtensionsEnabled; ///< RP Extensions for Downstream Port Containment. 0: Disable; <b>1: Enable</b>
+ UINT8 LtrEnable; ///< Latency Tolerance Reporting Mechanism. <b>0: Disable</b>; 1: Enable.
+ UINT8 PtmEnabled; ///< Enables PTM capability
+
+ UINT8 Aspm; ///< The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is <b>
+ UINT8 SlotNumber; ///< Indicates the slot number for the root port. Default is the value as root port index.
+ UINT8 SlotPowerLimitScale; ///< <b>(Test)</b> Specifies scale used for slot power limit value. Leave as 0 to set to default. Default is <b>zero</b>.
+ UINT16 SlotPowerLimitValue; ///< <b>(Test)</b> Specifies upper limit on power supplies by slot. Leave as 0 to set to default. Default is <b>zero</b>.
+
+ UINT8 AdvancedErrorReporting; ///< Indicate whether the Advanced Error Reporting is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT8 UnsupportedRequestReport; ///< Indicate whether the Unsupported Request Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT8 FatalErrorReport; ///< Indicate whether the Fatal Error Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT8 NoFatalErrorReport; ///< Indicate whether the No Fatal Error Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT8 CorrectableErrorReport; ///< Indicate whether the Correctable Error Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT8 SystemErrorOnFatalError; ///< Indicate whether the System Error on Fatal Error is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT8 SystemErrorOnNonFatalError; ///< Indicate whether the System Error on Non Fatal Error is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT8 SystemErrorOnCorrectableError; ///< Indicate whether the System Error on Correctable Error is enabled. <b>0: Disable</b>; 1: Enable.
+
+ UINT16 LtrMaxSnoopLatency; ///< Latency Tolerance Reporting, Max Snoop Latency.
+ UINT16 LtrMaxNoSnoopLatency; ///< Latency Tolerance Reporting, Max Non-Snoop Latency.
+ UINT8 SnoopLatencyOverrideMode; ///< Latency Tolerance Reporting, Snoop Latency Override Mode.
+ UINT8 SnoopLatencyOverrideMultiplier; ///< Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+ UINT16 SnoopLatencyOverrideValue; ///< Latency Tolerance Reporting, Snoop Latency Override Value.
+ UINT8 NonSnoopLatencyOverrideMode; ///< Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+ UINT8 NonSnoopLatencyOverrideMultiplier; ///< Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+ UINT16 NonSnoopLatencyOverrideValue; ///< Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+ UINT8 ForceLtrOverride; ///< <b>0: Disable</b>; 1: Enable.
+ UINT8 LtrConfigLock; ///< <b>0: Disable</b>; 1: Enable.
+} TCSS_PCIE_PORT_POLICY;
+
+///
+/// TCSS_PCIE_PEI_POLICY describes PCIe port settings for TCSS.
+///
+typedef struct {
+ TCSS_PCIE_PORT_POLICY PciePortPolicy[MAX_ITBT_PCIE_PORT];
+} TCSS_PCIE_PEI_POLICY;
+
+///
+/// The TCSS_IOM_PEI_CONFIG block describes IOM Aux/HSL override settings for TCSS.
+///
+typedef struct {
+ UINT16 AuxOri; ///< Bits defining value for IOM Aux Orientation Register
+ UINT16 HslOri; ///< Bits defining value for IOM HSL Orientation Register
+} TCSS_IOM_ORI_OVERRIDE;
+
+///
+/// The TCSS_IOM_PEI_CONFIG block describes IOM settings for TCSS.
+///
+typedef struct {
+ IOM_AUX_ORI_PAD_CONFIG IomAuxPortPad[MAX_IOM_AUX_BIAS_COUNT]; ///< The IOM_AUX_ORI_BIAS_CTRL port config setting.
+ TCSS_IOM_ORI_OVERRIDE IomOverrides;
+ IOM_INTERFACE_CONFIG IomInterface; ///< Config settings are BIOS <-> IOM interface.
+ PMC_INTERFACE_CONFIG PmcInterface; ///< Config settings for BIOS <-> PMC interface
+ UINT8 TcStateLimit; ///< Tcss C-State deep stage
+ UINT8 Usb3ComplModeEnable;
+ UINT8 Reserved[2]; ///< Reserved bytes for future use
+} TCSS_IOM_PEI_CONFIG;
+
+///
+/// The TCSS_MISC_PEI_CONFIG block describes MISC settings for TCSS.
+///
+typedef struct {
+ SA_XDCI_IRQ_INT_CONFIG SaXdci; ///< System Agent Xdci Int Pin and Irq setting
+ UINT32 Rsvd; ///< Reserved bytes for future use, align to multiple 4
+} TCSS_MISC_PEI_CONFIG;
+
+///
+/// The TCSS_PEI_CONFIG block describes TCSS settings for SA.
+///
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ TCSS_PCIE_PEI_POLICY PciePolicy; ///< The PCIe Config
+ USB_CONFIG UsbConfig; ///< USB config is shared between PCH and SA.
+ TCSS_IOM_PEI_CONFIG IomConfig; ///< The Iom Config
+ TCSS_MISC_PEI_CONFIG MiscConfig; ///< The MISC Config
+} TCSS_PEI_CONFIG;
+
+#pragma pack (pop)
+
+#endif /* _TCSS_PEI_CONFIG_H_ */
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Thc/ThcConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Thc/ThcConfig.h
new file mode 100644
index 0000000000..23c3750216
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Thc/ThcConfig.h
@@ -0,0 +1,73 @@
+/** @file
+ Touch Host Controller policy.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _THC_CONFIG_H_
+#define _THC_CONFIG_H_
+
+#define THC_CONFIG_REVISION 1
+extern EFI_GUID gThcConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ Available Port Assignments
+
+**/
+typedef enum {
+ ThcAssignmentNone, ///< None of the avaialbe controllers assigned
+ ThcAssignmentThc0, ///< Port assigned to THC0
+ ThcAssignmentThc1 ///< Port assigned to THC1
+} THC_PORT_ASSIGNMENT;
+
+
+/**
+ Port Configuration structure required for each Port that THC might use.
+
+**/
+typedef struct {
+ UINT32 Assignment; ///< Sets THCx assignment see THC_PORT_ASSIGNMENT
+ UINT32 InterruptPinMuxing; ///< Each GPIO PORTx/SPIx INTB Pin has different muxing options refer to GPIO_*_MUXING_THC_SPIx_*
+} THC_PORT;
+
+/**
+ THC_CONFIG block provides the configurations forTouch Host Controllers
+
+ Assignment field in each THC port controlls the THC behavior.
+
+ Available scenarios:
+ 1: Single Port 0 used by THC0
+ - THC0 Enabled
+ - Port0 assigned to THC0
+ - Port1 unassigned
+ - THC1 will be automatically Disabled.
+ 2: Both ports used by THC0
+ - THC0 Enabled
+ - Port0 assigned to THC0
+ - Port1 assigned to THC0
+ - THC1 will be automatically Disabled.
+ 3: Port 0 used by THC0 and Port 1 used by THC1
+ - THC0 Enabled
+ - Port0 assigned to THC0
+ - THC1 Enabled
+ - Port1 assigned to THC1.
+<b>4: Both Ports unassigned.</b>
+ Both THC Controllers will be disabled in that case.
+
+ @note
+ Invalid scenario that will cause ASSERT.
+ 1. Same port Number assigned to THC0 or THC1.
+ 2. Two Ports assigned to THC1.
+
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ THC_PORT ThcPort[2]; ///< Port Configuration
+} THC_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _THC_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Thermal/ThermalConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Thermal/ThermalConfig.h
new file mode 100644
index 0000000000..a952f74238
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Thermal/ThermalConfig.h
@@ -0,0 +1,153 @@
+/** @file
+ Thermal policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _THERMAL_CONFIG_H_
+#define _THERMAL_CONFIG_H_
+
+#define THERMAL_CONFIG_REVISION 1
+extern EFI_GUID gThermalConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This structure lists PCH supported throttling register setting for custimization.
+ When the SuggestedSetting is enabled, the customized values are ignored.
+**/
+typedef struct {
+ UINT32 T0Level : 9; ///< Custimized T0Level value. If SuggestedSetting is used, this setting is ignored.
+ UINT32 T1Level : 9; ///< Custimized T1Level value. If SuggestedSetting is used, this setting is ignored.
+ UINT32 T2Level : 9; ///< Custimized T2Level value. If SuggestedSetting is used, this setting is ignored.
+ UINT32 TTEnable : 1; ///< Enable the thermal throttle function. If SuggestedSetting is used, this settings is ignored.
+ /**
+ When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force at least T2 state.
+ If SuggestedSetting is used, this setting is ignored.
+ **/
+ UINT32 TTState13Enable : 1;
+ /**
+ When set to 1, this entire register (TL) is locked and remains locked until the next platform reset.
+ If SuggestedSetting is used, this setting is ignored.
+ **/
+ UINT32 TTLock : 1;
+ UINT32 SuggestedSetting : 1; ///< 0: Disable; <b>1: Enable</b> suggested representative values.
+ /**
+ ULT processors support thermal management and cross thermal throttling between the processor package
+ and LP PCH. The PMSYNC message from PCH to CPU includes specific bit fields to update the PCH
+ thermal status to the processor which is factored into the processor throttling.
+ Enable/Disable PCH Cross Throttling; 0: Disabled, 1: <b>Enabled</b>.
+ **/
+ UINT32 PchCrossThrottling : 1;
+ UINT32 Rsvd0; ///< Reserved bytes
+} THERMAL_THROTTLE_LEVELS;
+
+//
+// Supported Thermal Sensor Target Width
+//
+typedef enum {
+ DmiThermSensWidthX1 = 0,
+ DmiThermSensWidthX2 = 1,
+ DmiThermSensWidthX4 = 2,
+ DmiThermSensWidthX8 = 3,
+ DmiThermSensWidthX16 = 4
+} DMI_THERMAL_SENSOR_TARGET_WIDTH;
+
+/**
+ This structure allows to customize DMI HW Autonomous Width Control for Thermal and Mechanical spec design.
+ When the SuggestedSetting is enabled, the customized values are ignored.
+ Look at DMI_THERMAL_SENSOR_TARGET_WIDTH for possible values
+**/
+typedef struct {
+ UINT32 DmiTsawEn : 1; ///< DMI Thermal Sensor Autonomous Width Enable
+ UINT32 SuggestedSetting : 1; ///< 0: Disable; <b>1: Enable</b> suggested representative values
+ UINT32 RsvdBits0 : 6; ///< Reserved bits
+ UINT32 TS0TW : 3; ///< Thermal Sensor 0 Target Width (<b>DmiThermSensWidthx8</b>)
+ UINT32 TS1TW : 3; ///< Thermal Sensor 1 Target Width (<b>DmiThermSensWidthx4</b>)
+ UINT32 TS2TW : 3; ///< Thermal Sensor 2 Target Width (<b>DmiThermSensWidthx2</b>)
+ UINT32 TS3TW : 3; ///< Thermal Sensor 3 Target Width (<b>DmiThermSensWidthx1</b>)
+ UINT32 RsvdBits1 : 12; ///< Reserved bits
+} DMI_HW_WIDTH_CONTROL;
+
+/**
+ This structure configures PCH memory throttling thermal sensor GPIO PIN settings
+**/
+typedef struct {
+ /**
+ GPIO PM_SYNC enable, 0:Diabled, 1:<b>Enabled</b>
+ When enabled, RC will overrides the selected GPIO native mode.
+ For GPIO_C, PinSelection 0: CPU_GP_0 (default) or 1: CPU_GP_1
+ For GPIO_D, PinSelection 0: CPU_GP_3 (default) or 1: CPU_GP_2
+ For CNL: CPU_GP_0 is GPP_E3, CPU_GP_1 is GPP_E7, CPU_GP_2 is GPP_B3, CPU_GP_3 is GPP_B4.
+ **/
+ UINT32 PmsyncEnable : 1;
+ UINT32 C0TransmitEnable : 1; ///< GPIO Transmit enable in C0 state, 0:Disabled, 1:<b>Enabled</b>
+ UINT32 PinSelection : 1; ///< GPIO Pin assignment selection, <b>0: default</b>, 1: secondary
+ UINT32 RsvdBits0 : 29;
+} TS_GPIO_PIN_SETTING;
+
+enum PCH_PMSYNC_GPIO_X_SELECTION {
+ TsGpioC,
+ TsGpioD,
+ MaxTsGpioPin
+};
+
+/**
+ This structure supports an external memory thermal sensor (TS-on-DIMM or TS-on-Board).
+**/
+typedef struct {
+ /**
+ This will enable PCH memory throttling.
+ While this policy is enabled, must also enable EnableExtts in SA policy.
+ <b>0: Disable</b>; 1: Enable
+ **/
+ UINT32 Enable : 1;
+ UINT32 RsvdBits0 : 31;
+ /**
+ GPIO_C and GPIO_D selection for memory throttling.
+ It's strongly recommended to choose GPIO_C and GPIO_D for memory throttling feature,
+ and route EXTTS# accordingly.
+ **/
+ TS_GPIO_PIN_SETTING TsGpioPinSetting[2];
+} PCH_MEMORY_THROTTLING;
+
+/**
+ The THERMAL_CONFIG block describes the expected configuration of the Thermal IP block.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ UINT32 PchHotEnable : 1; ///< Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: <b>Disabled<b>, 1: Enabled.
+ UINT32 RsvdBits0 : 31;
+ /**
+ This field decides the settings of Thermal throttling. When the Suggested Setting
+ is enabled, PCH RC will use the suggested representative values.
+ **/
+ THERMAL_THROTTLE_LEVELS TTLevels;
+ /**
+ This field decides the settings of DMI throttling. When the Suggested Setting
+ is enabled, PCH RC will use the suggested representative values.
+ **/
+ DMI_HW_WIDTH_CONTROL DmiHaAWC;
+ /**
+ Memory Thermal Management settings
+ **/
+ PCH_MEMORY_THROTTLING MemoryThrottling;
+ /**
+ The recommendation is the same as Cat Trip point.
+ This field decides the temperature, default is <b>120</b>.
+ Temperature value used for PCHHOT# pin assertion based on 2s complement format
+ - 0x001 positive 1'C
+ - 0x000 0'C
+ - 0x1FF negative 1'C
+ - 0x1D8 negative 40'C
+ - and so on
+ **/
+ UINT16 PchHotLevel;
+ UINT8 Rsvd0[6];
+
+
+} THERMAL_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _THERMAL_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/TraceHub/TraceHubConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/TraceHub/TraceHubConfig.h
new file mode 100644
index 0000000000..9c315fb4a4
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/TraceHub/TraceHubConfig.h
@@ -0,0 +1,101 @@
+/** @file
+ Configurations for CPU and PCH trace hub
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _TRACE_HUB_CONFIG_H_
+#define _TRACE_HUB_CONFIG_H_
+
+#include <ConfigBlock.h>
+
+#define CPU_TRACEHUB_PREMEM_CONFIG_REVISION 1
+#define PCH_TRACEHUB_PREMEM_CONFIG_REVISION 1
+
+extern EFI_GUID gPchTraceHubPreMemConfigGuid;
+extern EFI_GUID gCpuTraceHubPreMemConfigGuid;
+
+typedef enum {
+ CpuTraceHub,
+ PchTraceHub
+} TRACE_HUB_DEVICE;
+///
+/// The TRACE_HUB_ENABLE_MODE describes TraceHub mode of operation
+///
+typedef enum {
+ TraceHubModeDisabled = 0,
+ TraceHubModeTargetDebugger = 1,
+ TraceHubModeHostDebugger = 2,
+ TraceHubModeMax
+} TRACE_HUB_ENABLE_MODE;
+
+///
+/// The TRACE_BUFFER_SIZE describes the desired TraceHub buffer size
+///
+typedef enum {
+ TraceBufferNone,
+ TraceBuffer1M,
+ TraceBuffer8M,
+ TraceBuffer64M,
+ TraceBuffer128M,
+ TraceBuffer256M,
+ TraceBuffer512M,
+ TraceBufferMax
+} TRACE_BUFFER_SIZE;
+
+#pragma pack (push,1)
+///
+/// TRACE_HUB_CONFIG block describes TraceHub settings
+///
+typedef struct {
+ /**
+ Trace hub mode. Default is disabled.
+ Target Debugger mode refers to debug tool running on target device itself and it works as a conventional PCI device;
+ Host Debugger mode refers to SUT debugged via probe on host, configured as ACPI device with PCI configuration sapce hidden.
+ <b>0 = Disable</b>; 1 = Target Debugger mode; 2 = Host Debugger mode
+ Refer to TRACE_HUB_ENABLE_MODE
+ **/
+ UINT8 EnableMode;
+ /**
+ Trace hub memory buffer region size policy.
+ The avaliable memory size options are: 0:0MB (none), 1:1MB, <b>2:8MB</b>, 3:64MB, 4:128MB, 5:256MB, 6:512MB.
+ Note : Limitation of total buffer size (CPU + PCH) is 512MB. If iTbt is enabled, the total size limits to 256 MB.
+ Refer to TRACE_BUFFER_SIZE
+ **/
+ UINT8 MemReg0Size;
+ UINT8 MemReg1Size;
+ /**
+ AET Trace. AET base address can be set to FW Base either from CPU trace hub or PCH one.
+ AetEnabled must be exclusive, if AetEnabled = 1 for CPU trace hub, must AetEnabled = 0 for PCH one.
+ The default is set to PCH.
+ CPU Trace Hub
+ <b>0 = Disabled</b>; 1 = Enabled
+ PCH Trace Hub
+ 0 = Disabled; <b>1 = Enabled</b>
+ **/
+ UINT8 AetEnabled;
+} TRACE_HUB_CONFIG;
+
+/**
+ CPU Trace Hub PreMem Configuration
+ Contains Trace Hub settings for CPU side tracing
+ <b>Revision 1</b>: - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ TRACE_HUB_CONFIG TraceHub; ///< Trace Hub Config
+} CPU_TRACE_HUB_PREMEM_CONFIG;
+
+/**
+ PCH Trace Hub PreMem Configuration
+ Contains Trace Hub settings for PCH side tracing
+ <b>Revision 1</b>: - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ TRACE_HUB_CONFIG TraceHub; ///< Trace Hub Config
+} PCH_TRACE_HUB_PREMEM_CONFIG;
+
+#pragma pack (pop)
+
+#endif
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/Usb2PhyConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/Usb2PhyConfig.h
new file mode 100644
index 0000000000..99063103c3
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/Usb2PhyConfig.h
@@ -0,0 +1,81 @@
+/** @file
+ USB2 PHY configuration policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _USB2_PHY_CONFIG_H_
+#define _USB2_PHY_CONFIG_H_
+
+#include <UsbConfig.h>
+
+#define USB2_PHY_CONFIG_REVISION 1
+extern EFI_GUID gUsb2PhyConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This structure configures per USB2 AFE settings.
+ It allows to setup the port electrical parameters.
+**/
+typedef struct {
+/** Per Port HS Preemphasis Bias (PERPORTPETXISET)
+ 000b - 0mV
+ 001b - 11.25mV
+ 010b - 16.9mV
+ 011b - 28.15mV
+ 100b - 28.15mV
+ 101b - 39.35mV
+ 110b - 45mV
+ 111b - 56.3mV
+**/
+ UINT8 Petxiset;
+/** Per Port HS Transmitter Bias (PERPORTTXISET)
+ 000b - 0mV
+ 001b - 11.25mV
+ 010b - 16.9mV
+ 011b - 28.15mV
+ 100b - 28.15mV
+ 101b - 39.35mV
+ 110b - 45mV
+ 111b - 56.3mV
+**/
+ UINT8 Txiset;
+/**
+ Per Port HS Transmitter Emphasis (IUSBTXEMPHASISEN)
+ 00b - Emphasis OFF
+ 01b - De-emphasis ON
+ 10b - Pre-emphasis ON
+ 11b - Pre-emphasis & De-emphasis ON
+**/
+ UINT8 Predeemp;
+/**
+ Per Port Half Bit Pre-emphasis (PERPORTTXPEHALF)
+ 1b - half-bit pre-emphasis
+ 0b - full-bit pre-emphasis
+**/
+ UINT8 Pehalfbit;
+} USB2_PHY_PARAMETERS;
+
+/**
+ This structure holds info on how to tune electrical parameters of USB2 ports based on board layout
+
+ <b>Revision 1</b>:
+ - Initial version.
+
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ This structure configures per USB2 port physical settings.
+ It allows to setup the port location and port length, and configures the port strength accordingly.
+ Changing this policy values from default ones may require disabling USB2 PHY Sus Well Power Gating
+ through Usb2PhySusPgEnable on PCH-LP
+ **/
+ USB2_PHY_PARAMETERS Port[MAX_USB2_PORTS];
+} USB2_PHY_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _USB2_PHY_CONFIG_H_
+
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/Usb3HsioConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/Usb3HsioConfig.h
new file mode 100644
index 0000000000..da816b1378
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/Usb3HsioConfig.h
@@ -0,0 +1,138 @@
+/** @file
+ USB3 Mod PHY configuration policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _USB3_HSIO_CONFIG_H_
+#define _USB3_HSIO_CONFIG_H_
+
+#include <UsbConfig.h>
+
+#define USB3_HSIO_CONFIG_REVISION 2
+extern EFI_GUID gUsb3HsioConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This structure describes USB3 Port N configuration parameters
+**/
+typedef struct {
+ /**
+ USB 3.0 TX Output Downscale Amplitude Adjustment (orate01margin)
+ HSIO_TX_DWORD8[21:16]
+ <b>Default = 00h</b>
+ **/
+ UINT8 HsioTxDownscaleAmp;
+ /**
+ USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting (ow2tapgen2deemph3p5)
+ HSIO_TX_DWORD5[21:16]
+ <b>Default = 29h</b> (approximately -3.5dB De-Emphasis)
+ **/
+ UINT8 HsioTxDeEmph;
+ /**
+ Signed Magnatude number added to the CTLE code.(ctle_adapt_offset_cfg_4_0)
+ HSIO_RX_DWORD25 [20:16]
+ Ex: -1 -- 1_0001. +1: 0_0001
+ <b>Default = 0h</b>
+ **/
+ UINT8 HsioCtrlAdaptOffsetCfg;
+ /**
+ LFPS filter select for n (filter_sel_n_2_0)
+ HSIO_RX_DWORD51 [29:27]
+ 0h:1.6ns
+ 1h:2.4ns
+ 2h:3.2ns
+ 3h:4.0ns
+ 4h:4.8ns
+ 5h:5.6ns
+ 6h:6.4ns
+ <b>Default = 0h</b>
+ **/
+ UINT8 HsioFilterSelN;
+ /**
+ LFPS filter select for p (filter_sel_p_2_0)
+ HSIO_RX_DWORD51 [26:24]
+ 0h:1.6ns
+ 1h:2.4ns
+ 2h:3.2ns
+ 3h:4.0ns
+ 4h:4.8ns
+ 5h:5.6ns
+ 6h:6.4ns
+ <b>Default = 0h</b>
+ **/
+ UINT8 HsioFilterSelP;
+ /**
+ Controls the input offset (olfpscfgpullupdwnres_sus_usb_2_0)
+ HSIO_RX_DWORD51 [2:0]
+ 000 Prohibited
+ 001 45K
+ 010 Prohibited
+ 011 31K
+ 100 36K
+ 101 36K
+ 110 36K
+ 111 36K
+ <b>Default = 3h</b>
+ **/
+ UINT8 HsioOlfpsCfgPullUpDwnRes;
+
+ UINT8 HsioTxDeEmphEnable; ///< Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment, <b>0: Disable</b>; 1: Enable.
+ UINT8 HsioTxDownscaleAmpEnable; ///< Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, <b>0: Disable</b>; 1: Enable.
+ UINT8 HsioCtrlAdaptOffsetCfgEnable; ///< Enable the write to Signed Magnatude number added to the CTLE code, <b>0: Disable</b>; 1: Enable.
+ UINT8 HsioFilterSelNEnable; ///< Enable the write to LFPS filter select for n, <b>0: Disable</b>; 1: Enable.
+ UINT8 HsioFilterSelPEnable; ///< Enable the write to LFPS filter select for p, <b>0: Disable</b>; 1: Enable.
+ UINT8 HsioOlfpsCfgPullUpDwnResEnable; ///< Enable the write to olfpscfgpullupdwnres, <b>0: Disable</b>; 1: Enable.
+ /**
+ USB 3.0 TX Output - Unique Transition Bit Scale for rate 3 (rate3UniqTranScale)
+ HSIO_TX_DWORD9[6:0]
+ <b>Default = 4Ch</b>
+ **/
+ UINT8 HsioTxRate3UniqTran;
+ /**
+ USB 3.0 TX Output -Unique Transition Bit Scale for rate 2 (rate2UniqTranScale)
+ HSIO_TX_DWORD9[14:8]
+ <b>Default = 4Ch</b>
+ **/
+ UINT8 HsioTxRate2UniqTran;
+ /**
+ USB 3.0 TX Output - Unique Transition Bit Scale for rate 1 (rate1UniqTranScale)
+ HSIO_TX_DWORD9[22:16]
+ <b>Default = 4Ch</b>
+ **/
+ UINT8 HsioTxRate1UniqTran;
+ /**
+ USB 3.0 TX Output - Unique Transition Bit Scale for rate 0 (rate0UniqTranScale)
+ HSIO_TX_DWORD9[30:24]
+ <b>Default = 4Ch</b>
+ **/
+ UINT8 HsioTxRate0UniqTran;
+
+ UINT8 HsioTxRate3UniqTranEnable; ///< Enable the write to USB 3.0 TX Unique Transition Bit Mode for rate 3, <b>0: Disable</b>; 1: Enable.
+ UINT8 HsioTxRate2UniqTranEnable; ///< Enable the write to USB 3.0 TX Unique Transition Bit Mode for rate 2, <b>0: Disable</b>; 1: Enable.
+ UINT8 HsioTxRate1UniqTranEnable; ///< Enable the write to USB 3.0 TX Unique Transition Bit Mode for rate 1, <b>0: Disable</b>; 1: Enable.
+ UINT8 HsioTxRate0UniqTranEnable; ///< Enable the write to USB 3.0 TX Unique Transition Bit Mode for rate 0, <b>0: Disable</b>; 1: Enable.
+} HSIO_PARAMETERS;
+
+/**
+ Structure for holding USB3 tuning parameters
+
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - USB 3.0 TX Output Unique Transition Bit Scale policies added
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ These members describe whether the USB3 Port N of PCH is enabled by platform modules.
+ **/
+ HSIO_PARAMETERS Port[MAX_USB3_PORTS];
+} USB3_HSIO_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _USB3_HSIO_CONFIG_H_
+
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/UsbConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/UsbConfig.h
new file mode 100644
index 0000000000..a1c7f0bb04
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Usb/UsbConfig.h
@@ -0,0 +1,149 @@
+/** @file
+ Common USB policy shared between PCH and CPU
+ Contains general features settings for xHCI and xDCI
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _USB_CONFIG_H_
+#define _USB_CONFIG_H_
+
+#define USB_CONFIG_REVISION 2
+extern EFI_GUID gUsbConfigGuid;
+
+#define MAX_USB2_PORTS 16
+#define MAX_USB3_PORTS 10
+
+#pragma pack (push,1)
+
+typedef UINT8 USB_OVERCURRENT_PIN;
+#define USB_OC_SKIP 0xFF
+#define USB_OC_MAX_PINS 16 ///< Total OC pins number (both physical and virtual)
+
+/**
+ This structure configures per USB2.0 port settings like enabling and overcurrent protection
+**/
+typedef struct {
+ /**
+ These members describe the specific over current pin number of USB 2.0 Port N.
+ It is SW's responsibility to ensure that a given port's bit map is set only for
+ one OC pin Description. USB2 and USB3 on the same combo Port must use the same OC pin.
+ **/
+ UINT32 OverCurrentPin : 8;
+ UINT32 Enable : 1; ///< 0: Disable; <b>1: Enable</b>.
+ UINT32 PortResetMessageEnable : 1; ///< 0: Disable USB2 Port Reset Message; 1: Enable USB2 Port Reset Message
+ UINT32 RsvdBits0 : 22; ///< Reserved bits
+} USB2_PORT_CONFIG;
+
+/**
+ This structure configures per USB3.x port settings like enabling and overcurrent protection
+**/
+typedef struct {
+ /**
+ These members describe the specific over current pin number of USB 3.x Port N.
+ It is SW's responsibility to ensure that a given port's bit map is set only for
+ one OC pin Description. USB2 and USB3 on the same combo Port must use the same OC pin.
+ **/
+ UINT32 OverCurrentPin : 8;
+ UINT32 Enable : 1; ///< 0: Disable; <b>1: Enable</b>.
+ UINT32 RsvdBits0 : 23; ///< Reserved bits
+} USB3_PORT_CONFIG;
+
+/**
+ The XDCI_CONFIG block describes the configurations
+ of the xDCI Usb Device controller.
+**/
+typedef struct {
+ /**
+ This member describes whether or not the xDCI controller should be enabled.
+ 0: Disable; <b>1: Enable</b>.
+ **/
+ UINT32 Enable : 1;
+ UINT32 RsvdBits0 : 31; ///< Reserved bits
+} XDCI_CONFIG;
+
+
+/**
+ This member describes the expected configuration of the USB controller,
+ Platform modules may need to refer Setup options, schematic, BIOS specification to update this field.
+ The Usb20OverCurrentPins and Usb30OverCurrentPins field must be updated by referring the schematic.
+
+ <b>Revision 1</b>: - Initial version.
+ <b>Revision 2</b>: - Add USB3LinkSpeed
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ This policy option when set will make BIOS program Port Disable Override register during PEI phase.
+ When disabled BIOS will not program the PDO during PEI phase and leave PDO register unlocked for later programming.
+ If this is disabled, platform code MUST set it before booting into OS.
+ <b>1: Enable</b>
+ 0: Disable
+ **/
+ UINT32 PdoProgramming : 1;
+ /**
+ This option allows for control whether USB should program the Overcurrent Pins mapping into xHCI.
+ Disabling this feature will disable overcurrent detection functionality.
+ Overcurrent Pin mapping data is contained in respective port structures (i.e. USB30_PORT_CONFIG) in OverCurrentPin field.
+ By default this Overcurrent functionality should be enabled and disabled only for OBS debug usage.
+ <b>1: Will program USB OC pin mapping in respective xHCI controller registers</b>
+ 0: Will clear OC pin mapping allow for OBS usage of OC pins
+ **/
+ UINT32 OverCurrentEnable : 1;
+ /**
+ <b>(Test)</b>
+ If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning that OC mapping data will be
+ consumed by xHCI and OC mapping registers will be locked. OverCurrent mapping data is taken from respective port data
+ structure from OverCurrentPin field.
+ If EnableOverCurrent policy is enabled this also should be enabled, otherwise xHCI won't consume OC mapping data.
+ <b>1: Program OCCFDONE bit and make xHCI consume OverCurrent mapping data</b>
+ 0: Do not program OCCFDONE bit making it possible to use OBS debug on OC pins.
+ **/
+ UINT32 XhciOcLock : 1;
+ /**
+ Enabling this feature will allow for overriding LTR values for xHCI controller.
+ Values used for programming will be taken from this config block and BIOS will disregard recommended ones.
+ <b>0: disable - do not override recommended LTR values</b>
+ 1: enable - override recommended LTR values
+ **/
+ UINT32 LtrOverrideEnable : 1;
+ /**
+ This setting enable LBPM GEN1 speed
+ 0: GEN2;
+ 1: GEN1;
+ **/
+ UINT32 USB3LinkSpeed : 1;
+ UINT32 RsvdBits0 : 27; ///< Reserved bits
+ /**
+ High Idle Time Control override value
+ This setting is used only if LtrOverrideEnable is enabled
+ **/
+ UINT32 LtrHighIdleTimeOverride;
+ /**
+ Medium Idle Time Control override value
+ This setting is used only if LtrOverrideEnable is enabled
+ **/
+ UINT32 LtrMediumIdleTimeOverride;
+ /**
+ Low Idle Time Control override value
+ This setting is used only if LtrOverrideEnable is enabled
+ **/
+ UINT32 LtrLowIdleTimeOverride;
+ /**
+ These members describe whether the USB2 Port N of PCH is enabled by platform modules.
+ **/
+ USB2_PORT_CONFIG PortUsb20[MAX_USB2_PORTS];
+ /**
+ These members describe whether the USB3 Port N of PCH is enabled by platform modules.
+ **/
+ USB3_PORT_CONFIG PortUsb30[MAX_USB3_PORTS];
+ /**
+ This member describes whether or not the xDCI controller should be enabled.
+ **/
+ XDCI_CONFIG XdciConfig;
+
+} USB_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _USB_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/VoltageRegulator/CpuPowerMgmtVrConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/VoltageRegulator/CpuPowerMgmtVrConfig.h
new file mode 100644
index 0000000000..8b01ecd262
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/VoltageRegulator/CpuPowerMgmtVrConfig.h
@@ -0,0 +1,114 @@
+/** @file
+ CPU Power Management VR Config Block.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _CPU_POWER_MGMT_VR_CONFIG_H_
+#define _CPU_POWER_MGMT_VR_CONFIG_H_
+
+#define CPU_POWER_MGMT_VR_CONFIG_REVISION 7
+
+extern EFI_GUID gCpuPowerMgmtVrConfigGuid;
+
+#pragma pack (push,1)
+
+///
+/// Defines the maximum number of VR domains supported.
+/// @warning: Changing this define would cause DWORD alignment issues in policy structures.
+///
+#define MAX_NUM_VRS 5
+
+/**
+ CPU Power Management VR Configuration Structure.
+
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Updated Acoustic Noise Mitigation.
+ <b>Revision 3</b>:
+ - Deprecate PsysOffset and added PsysOffset1 for Psys Offset Correction
+ <b>Revision 4</b>:
+ - Deprecate TdcTimeWindow and added TdcTimeWindow1 for TDC Time
+ Added Irms support.
+ <b>Revision 5</b>:
+ - Add RfiMitigation.
+ <b>Revision 6</b>:
+ - Added an option to Enable/Disable FIVR Spread Spectrum
+ <b>Revision 7</b>:
+ - Add Dynamic Periodicity Alteration (DPA) tuning feature
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ UINT32 AcousticNoiseMitigation : 1; ///< Enable or Disable Acoustic Noise Mitigation feature. <b>0: Disabled</b>; 1: Enabled
+ /**
+ VR specific mailbox commands.
+ <b>00b - no VR specific command sent.</b>
+ 01b - A VR mailbox command specifically for the MPS IMPV8 VR will be sent.
+ 10b - VR specific command sent for PS4 exit issue.
+ 11b - Reserved.
+ **/
+ UINT32 SendVrMbxCmd : 2;
+ UINT32 EnableMinVoltageOverride : 1; ///< Enable or disable Minimum Voltage override for minimum voltage runtime and minimum voltage C8. <b>0: Disabled</b> 1: Enabled.
+ UINT32 RfiMitigation : 1; ///< Enable or Disable RFI Mitigation. <b>0: Disable - DCM is the IO_N default</b>; 1: Enable - Enable IO_N DCM/CCM switching as RFI mitigation.
+ UINT32 RsvdBits : 27; ///< Reserved for future use.
+ UINT8 PsysSlope; ///< PCODE MMIO Mailbox: Platform Psys slope correction. <b>0: Auto</b> Specified in 1/100 increment values. Range is 0-200. 125 = 1.25.
+ UINT8 PsysOffset; ///< PCODE MMIO Mailbox: Platform Psys offset correction. <b>0: Auto</b> Units 1/4, Range 0-255. Value of 100 = 100/4 = 25 offset. Deprecated
+ UINT8 FivrSpreadSpectrum; ///< Set the Spread Spectrum Range. <b>1.5%</b>, Range: 0.5%, 1%, 1.5%, 2%, 3%, 4%, 5%, 6%. Each Range is translated to internally encoded values. 0.5% = 0, 1% = 3, 1.5% = 8, 2% = 18, 3% = 28, 4% = 34, 5% = 39, 6% = 44.
+ UINT8 RsvdBytes0;
+ /**
+ PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz.
+ <b>0: Auto</b>
+ Range varies based on XTAL clock:
+ - 0-1918 (Up to 191.8HMz) for 24MHz clock.
+ - 0-1535 (Up to 153.5MHz) for 19MHz clock.
+ **/
+ UINT16 FivrRfiFrequency;
+ UINT8 RsvdBytes1[2];
+ /** @name VR Settings
+ The VR related settings are sorted in an array where each index maps to the VR domain as defined below:
+ - 0 = System Agent VR
+ - 1 = IA Core VR
+ - 2 = Ring Vr
+ - 3 = GT VR
+ - 4 = FIVR VR
+
+ The VR settings for a given domain must be populated in the appropriate index.
+ **/
+ ///@{
+ UINT16 TdcCurrentLimit[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. Range is 0-4095. 1000 = 125A. <b>0: 0 Amps</b>
+ UINT16 AcLoadline[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is 0-6249. <b>Intel Recommended Defaults vary by domain and SKU.</b>
+ UINT16 DcLoadline[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b>
+ UINT16 Psi1Threshold[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A.
+ UINT16 Psi2Threshold[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A.
+ UINT16 Psi3Threshold[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A.
+ INT16 ImonOffset[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b>
+ UINT16 IccMax[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A. <b>Default: 0 - Auto, no override</b>
+ UINT16 VrVoltageLimit[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV.
+ UINT16 ImonSlope[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. Range is 0-200. 125 = 1.25. <b>0: Auto</b>
+ UINT8 Psi3Enable[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>.
+ UINT8 Psi4Enable[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.
+ UINT8 VrConfigEnable[MAX_NUM_VRS]; ///< Enable/Disable BIOS configuration of VR; 0: Disable; <b>1: Enable.</b>
+ UINT8 TdcEnable[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable; </b>1: Enable
+ UINT8 TdcTimeWindow[MAX_NUM_VRS]; ///< @deprecated. PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. <b>1ms default</b>
+ UINT8 TdcLock[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.
+ UINT8 FastPkgCRampDisable[MAX_NUM_VRS]; ///< Disable Fast Slew Rate for Deep Package C States for VR IA,GT,SA,VLCC,FIVR domain based on Acoustic Noise Mitigation feature enabled. <b>0: False</b>; 1: True
+ UINT8 SlowSlewRate[MAX_NUM_VRS]; ///< Slew Rate configuration for Deep Package C States for VR VR IA,GT,SA,VLCC,FIVR domain based on Acoustic Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ ///@}
+ UINT16 MinVoltageRuntime; ///< PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride = 1 .Range 0 to 1999mV. <b> 0: 0mV </b>
+ UINT16 MinVoltageC8; ///< PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride = 1. Range 0 to 1999mV. <b> 0: 0mV </b>
+ UINT16 PsysOffset1; ///< PCODE MMIO Mailbox: Platform Psys offset correction. <b>0: Auto</b> Units 1/1000, Range 0-63999. For an offset of 25.348, enter 25348.
+ UINT8 RsvdBytes2[2];
+ UINT32 TdcTimeWindow1[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. <b>1ms default</b>
+ UINT8 Irms[MAX_NUM_VRS]; ///< PCODE MMIO Mailbox: Current root mean square. <b>0: Disable</b>; 1: Enable.
+ UINT8 FivrSpectrumEnable; ///< Enable or Disable FIVR Spread Spectrum 0: Disable; <b> 1: Enable.</b>
+ UINT8 Rsvd1[2];
+ UINT8 PreWake; ///< PCODE MMIO Mailbox: Acoustic Noise Mitigation Range. This can be programmed only if AcousticNoiseMitigation is enabled.<b>Default Value = 0 micro ticks</b> Defines the max pre-wake randomization time in micro ticks. Range is 0-255.
+ UINT8 RampUp; ///< PCODE MMIO Mailbox: Acoustic Noise Mitigation Range. This can be programmed only if AcousticNoiseMitigation is enabled.<b>Default Value = 0 micro ticks</b> Defines the max ramp up randomization time in micro ticks. Range is 0-255.
+ UINT8 RampDown; ///< PCODE MMIO Mailbox: Acoustic Noise Mitigation Range. This can be programmed only if AcousticNoiseMitigation is enabled.<b>Default Value = 0 micro ticks</b> Defines the max ramp down randomization time in micro ticks. Range is 0-255.
+ UINT8 Rsvd2[1];
+} CPU_POWER_MGMT_VR_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _CPU_POWER_MGMT_VR_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Vtd/VtdConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Vtd/VtdConfig.h
new file mode 100644
index 0000000000..74ca983a5d
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Vtd/VtdConfig.h
@@ -0,0 +1,64 @@
+/** @file
+ VT-d policy definitions.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _VTD_CONFIG_H_
+#define _VTD_CONFIG_H_
+
+#include <Library/VtdInfoLib.h>
+#pragma pack(push, 1)
+
+#define VTD_CONFIG_REVISION 1
+#define VTD_DXE_CONFIG_REVISION 2
+
+/**
+ The data elements should be initialized by a Platform Module.
+ The data structure is for VT-d driver initialization\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28:
+ VT-D Support can be verified by reading CAP ID register as expalined in BIOS Spec.
+ This policy is for debug purpose only.
+ If VT-D is not supported, all other policies in this config block will be ignored.
+ <b>0 = To use Vt-d</b>;
+ 1 = Avoids programming Vtd bars, Vtd overrides and DMAR table.
+ **/
+ UINT8 VtdDisable;
+ UINT8 X2ApicOptOut; ///< Offset 29 :This field is used to enable the X2APIC_OPT_OUT bit in the DMAR table. 1=Enable/Set and <b>0=Disable/Clear</b>
+ UINT8 DmaControlGuarantee; ///< Offset 30 :This field is used to enable the DMA_CONTROL_GUARANTEE bit in the DMAR table. 1=Enable/Set and <b>0=Disable/Clear</b>
+ UINT8 VtdIgdEnable; ///< Offset 31 :This field is used to enable the VtdIgdEnable Policy. 1=Enable/Set and <b>0=Disable/Clear</b>
+ UINT8 VtdIpuEnable; ///< Offset 32 :This field is used to enable the VtdIpuEnable Policy. 1=Enable/Set and <b>0=Disable/Clear</b>
+ UINT8 VtdIopEnable; ///< Offset 33 :This field is used to enable the VtdIopEnable Policy. 1=Enable/Set and <b>0=Disable/Clear</b>
+ UINT8 VtdItbtEnable; ///< Offset 34 :This field is used to enable the VtdItbtEnable Policy. 1=Enable/Set and <b>0=Disable/Clear</b>
+ UINT8 PreBootDmaMask; ///< Offset 35 :Convey PcdVTdPolicyPropertyMask value from EDK2 IntelSiliconPkg
+ /**
+ Offset 36:
+ This field is used to describe the base addresses for VT-d function:\n
+ VTD BAR for Gfx if IGfx is supported : <b>BaseAddress[0]=0xFED90000,\n
+ VTD BAR for IPU if IPU is supporrted : BaseAddress[1]=0xFED92000,\n
+ VTD BAR for other DMA Agents (except Igfx and IPU) : BaseAddress[2]=0xFED91000,\n
+ VTD BAR for iTBT if iTBT is supported : BaseAddress[3]=0xFED84000, BaseAddress[4]=0xFED85000, BaseAddress[5]=0xFED86000,BaseAddress[6]=0xFED87000</b>
+ **/
+ UINT32 BaseAddress[VTD_ENGINE_NUMBER];
+ UINT32 DmaBufferSize; ///< Offset 64 :Protect Memory Region (PMR) DMA buffer size
+
+
+} VTD_CONFIG;
+
+/**
+ The data structure is for VT-d driver initialization in DXE\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+} VTD_DXE_CONFIG;
+#pragma pack(pop)
+
+#endif // _VTD_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h
new file mode 100644
index 0000000000..8766762580
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h
@@ -0,0 +1,31 @@
+/** @file
+ WatchDog policy
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _WATCH_DOG_CONFIG_H_
+#define _WATCH_DOG_CONFIG_H_
+
+#define WATCH_DOG_PREMEM_CONFIG_REVISION 1
+extern EFI_GUID gWatchDogPreMemConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This policy clears status bits and disable watchdog, then lock the
+ WDT registers.
+ while WDT is designed to be disabled and locked by Policy,
+ bios should not enable WDT by WDT PPI. In such case, bios shows the
+ warning message but not disable and lock WDT register to make sure
+ WDT event trigger correctly.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ UINT32 DisableAndLock : 1; ///< <b>(Test)</b> Set 1 to clear WDT status, then disable and lock WDT registers. <b>0: Disable</b>; 1: Enable.
+ UINT32 RsvdBits : 31;
+} PCH_WDT_PREMEM_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _WATCH_DOG_CONFIG_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/SiPkg.dec b/Silicon/Intel/TigerlakeSiliconPkg/SiPkg.dec
new file mode 100644
index 0000000000..0c0f2db104
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/SiPkg.dec
@@ -0,0 +1,1207 @@
+## @file
+# Component description file for the Silicon Reference Code.
+#
+# Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+
+[Defines]
+DEC_SPECIFICATION = 0x00010017
+PACKAGE_NAME = SiPkg
+PACKAGE_VERSION = 0.1
+PACKAGE_GUID = F245E276-44A0-46b3-AEB5-9898BBCF008D
+
+[Includes.Common.Private]
+
+#
+# TigerLake Fru
+#
+Fru/TglCpu/IncludePrivate
+Fru/TglPch/IncludePrivate
+
+##
+# IpBlock IncludePrivate
+#
+IpBlock/Psf/IncludePrivate
+IpBlock/Pmc/IncludePrivate
+IpBlock/Smbus/IncludePrivate
+IpBlock/Graphics/IncludePrivate
+IpBlock/CpuPcieRp/IncludePrivate
+IpBlock/Hda/IncludePrivate
+IpBlock/PchDmi/IncludePrivate
+IpBlock/P2sb/IncludePrivate
+IpBlock/Spi/IncludePrivate
+IpBlock/Gpio/IncludePrivate
+IpBlock/Cnvi/IncludePrivate
+IpBlock/Gbe/IncludePrivate
+IpBlock/PcieRp/IncludePrivate
+IpBlock/Vtd/IncludePrivate
+IpBlock/HostBridge/IncludePrivate
+IpBlock/SerialIo/IncludePrivate
+
+SystemAgent/IncludePrivate
+
+Pch/IncludePrivate
+
+[Includes]
+#
+# TigerLake
+#
+Fru/TglCpu/Include
+Fru/TglPch/Include
+
+# CPU PCIe
+IpBlock/CpuPcieRp/Include
+
+IpBlock/Gpio/Include
+
+
+##
+#
+# This section is for IP ConfigBlock versions control
+#
+# - Memory
+Include/ConfigBlock/Memory/Ver2
+#
+# - Graphics
+Include/ConfigBlock/Graphics/Gen12
+#
+# - CPU PCIe
+Include/ConfigBlock/CpuPcieRp/Gen4
+Include/ConfigBlock/CpuDmi
+
+# - Hybrid Graphics
+Include/ConfigBlock/HybridGraphics
+
+Include
+#
+# SystemAgent
+#
+SystemAgent/Include
+SystemAgent/AcpiTables
+SystemAgent/AcpiTables/SaSsdt
+Include/ConfigBlock/Vtd
+Include/ConfigBlock/PcieRp
+Include/ConfigBlock/Gna
+Include/ConfigBlock/CpuPcieRp/Gen4
+Include/ConfigBlock/CpuDmi
+Include/ConfigBlock/HybridGraphics
+Include/ConfigBlock/HostBridge
+#
+# Cpu
+#
+Cpu/Include
+Include/ConfigBlock/Overclocking
+Include/ConfigBlock/VoltageRegulator
+
+#
+# Pch
+#
+Pch/Include
+Include/ConfigBlock/Thermal
+Include/ConfigBlock/P2sb
+Include/ConfigBlock/Ish
+Include/ConfigBlock/Usb
+Include/ConfigBlock/Espi
+Include/ConfigBlock/Fivr
+Include/ConfigBlock/Rtc
+Include/ConfigBlock/Smbus
+Include/ConfigBlock/Pmc
+Include/ConfigBlock/Itss
+Include/ConfigBlock/Scs
+Include/ConfigBlock/Hda
+Include/ConfigBlock/Sata
+Include/ConfigBlock/Rst
+Include/ConfigBlock/Ieh
+Include/ConfigBlock/Me
+Include/ConfigBlock/PchDmi
+Include/ConfigBlock/Gpio
+Include/ConfigBlock/Dci
+Include/ConfigBlock/Cnvi
+Include/ConfigBlock/Gbe
+Include/ConfigBlock/TraceHub
+Include/ConfigBlock/Thc
+Include/ConfigBlock/Wdt
+Include/ConfigBlock/PcieRp/PchPcieRp
+Include/ConfigBlock/PcieRp
+Include/ConfigBlock/Psf
+Include/ConfigBlock/SerialIo
+Include/ConfigBlock/HybridStorage
+Include/ConfigBlock/Spi
+
+
+#
+# - Tcss
+Include/ConfigBlock/Tcss
+[Guids.common.Private]
+#
+# PCH
+#
+gPchDeviceTableHobGuid = { 0xb3e123d0, 0x7a1e, 0x4db4, { 0xaf, 0x66, 0xbe, 0xd4, 0x1e, 0x9c, 0x66, 0x38 }}
+gWdtHobGuid = { 0x65675786, 0xacca, 0x4b11, { 0x8a, 0xb7, 0xf8, 0x43, 0xaa, 0x2a, 0x8b, 0xea }}
+gPchConfigHobGuid = { 0x524ed3ca, 0xb250, 0x49f5, { 0x94, 0xd9, 0xa2, 0xba, 0xff, 0xc7, 0x0e, 0x14 }}
+gGpioLibUnlockHobGuid = { 0xA7892E49, 0x0F9F, 0x4166, { 0xB8, 0xD6, 0x8A, 0x9B, 0xD9, 0x8B, 0x17, 0x38 }}
+gSiScheduleResetHobGuid = { 0xEA0597FF, 0x8858, 0x41CA, { 0xBB, 0xC1, 0xFE, 0x18, 0xFC, 0xD2, 0x8E, 0x22 }}
+gCnviConfigHobGuid = { 0xa8d6e4d9, 0x94b7, 0x4fc9, { 0x94, 0x3f, 0x7a, 0x9c, 0xb2, 0x31, 0x57, 0xce }}
+
+#
+# CPU
+#
+gPeiAcpiCpuDataGuid = { 0x7682bbef, 0xb0b6, 0x4939, { 0xae, 0x66, 0x1b, 0x3d, 0xf2, 0xf6, 0xaa, 0xf3 }}
+gCpuStatusCodeDataTypeExceptionHandlerGuid = { 0x3BC2BD12, 0xAD2E, 0x11D5, { 0x87, 0xDD, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
+
+#
+# SA
+#
+gSchemaListGuid = { 0x3047C2AC, 0x5E8E, 0x4C55, { 0xA1, 0xCB, 0xEA, 0xAD, 0x0A, 0x88, 0x86, 0x1B }}
+gEqPhase3SchemaGuid = { 0x145AC084, 0x340E, 0x4777, { 0xBC, 0x75, 0xF8, 0x50, 0x5F, 0xFD, 0x50, 0x9D }}
+gScoreSchemaGuid = { 0x8233A1BB, 0x58D5, 0x4F66, { 0xA1, 0x3F, 0x8A, 0xA3, 0xED, 0x6A, 0xF5, 0xA0 }}
+gPortMarginGuid = { 0xD7154D12, 0x03B2, 0x4054, { 0x8C, 0xD2, 0x9F, 0x4B, 0x20, 0x90, 0xBE, 0xF7 }}
+gJitterTolerenceGuid = { 0xB52A2E04, 0x45FF, 0x484E, { 0xB5, 0xFE, 0xEE, 0x47, 0x8F, 0x5F, 0x6C, 0x9B }}
+gLaneMarginGuid = { 0x7AC0996D, 0xA601, 0x4210, { 0x94, 0x4E, 0x93, 0x4E, 0x51, 0x7B, 0x6C, 0x57 }}
+gVocMarginGuid = { 0x3578349A, 0x9E98, 0x4F70, { 0x91, 0xCB, 0xE2, 0x5B, 0x98, 0x99, 0xBC, 0x16 }}
+
+[Guids]
+gSmbiosProcessorInfoHobGuid = {0xe6d73d92, 0xff56, 0x4146, {0xaf, 0xac, 0x1c, 0x18, 0x81, 0x7d, 0x68, 0x71}}
+gSmbiosCacheInfoHobGuid = {0xd805b74e, 0x1460, 0x4755, {0xbb, 0x36, 0x1e, 0x8c, 0x8a, 0xd6, 0x78, 0xd7}}
+
+##
+## IntelFrameworkPkg
+##
+# MsegSmramPei.inf
+gEfiSmmPeiSmramMemoryReserveGuid = {0x6dadf1d1, 0xd4cc, 0x4910, {0xbb, 0x6e, 0x82, 0xb1, 0xfd, 0x80, 0xff, 0x3d}}
+##
+## MdeModulePkg
+##
+gEfiMemoryTypeInformationGuid = {0x4c19049f, 0x4137, 0x4dd3, {0x9c, 0x10, 0x8b, 0x97, 0xa8, 0x3f, 0xfd, 0xfa}}
+gEfiCapsuleVendorGuid = {0x711c703f, 0xc285, 0x4b10, {0xa3, 0xb0, 0x36, 0xec, 0xbd, 0x3c, 0x8b, 0xe2}}
+gEfiConsoleOutDeviceGuid = { 0xd3b36f2c, 0xd551, 0x11d4, { 0x9a, 0x46, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d}}
+##
+## Common
+##
+## Include/ConfigBlock/SiConfig.h
+gSiConfigGuid = {0x4ed6d282, 0x22f3, 0x4fe1, {0xa6, 0x61, 0x6, 0x1a, 0x97, 0x38, 0x59, 0xd8}}
+##
+gSiPreMemConfigGuid = {0xb94c004c, 0xa0ab, 0x40f0, {0x9b, 0x61, 0x0b, 0x25, 0x88, 0xbe, 0xfd, 0xc6}}
+##
+##
+gPciePreMemConfigGuid = {0xd0f9c2a9, 0x7332, 0x4733, {0x8d, 0xb1, 0x98, 0x79, 0x27, 0x60, 0xda, 0xe6}}
+##
+gSiPkgTokenSpaceGuid = {0x977c97c1, 0x47e1, 0x4b6b, {0x96, 0x69, 0x43, 0x66, 0x99, 0xcb, 0xe4, 0x5b}}
+## Include/SiConfigHob.h
+gSiConfigHobGuid = {0xb3903068, 0x7482, 0x4424, {0xba, 0x4b, 0x40, 0x5f, 0x8f, 0xd7, 0x65, 0x4e}}
+gBootMediaHobGuid = {0x8c7340ea, 0xde8b, 0x4e06, {0xa4, 0x78, 0xec, 0x8b, 0x62, 0xd7, 0xa, 0x8b}}
+gEfiPramConfGuid = { 0xecb54cd9, 0xe5ae, 0x4fdc, { 0xa9, 0x71, 0xe8, 0x77, 0x75, 0x60, 0x68, 0xf7}}
+##
+##
+## IPU's GUIDs
+##
+gIpuDataHobGuid = {0x61dd66, 0x212b, 0x4dae, {0x9b, 0xc0, 0x30, 0xe0, 0x2e, 0x3f, 0x40, 0xfd}}
+gIpuConfigHobGuid = {0x446268e5, 0x8c30, 0x4e0a, {0x9b, 0x28, 0xa3, 0xe7, 0xf0, 0x4, 0x31, 0xd0}}
+
+## Include/FspErrorInfo.h
+gFspErrorInfoHobGuid = {0x611e6a88, 0xadb7, 0x4301, {0x93, 0xff, 0xe4, 0x73, 0x04, 0xb4, 0x3d, 0xa6}}
+gStatusCodeDataTypeFspErrorGuid = {0x611e6a88, 0xadb7, 0x4301, {0x93, 0xff, 0xe4, 0x73, 0x04, 0xb4, 0x3d, 0xa6}}
+
+##
+##
+## SystemAgent
+##
+gSaOverclockingPreMemConfigGuid = { 0x09ecc29d, 0xdbbe, 0x49fb, { 0xa6, 0x49, 0x4b, 0xf6, 0x40, 0xe2, 0xeb, 0xd6}}
+gSaAcpiTableStorageGuid = {0x3c0ed5e2, 0x91ea, 0x4b94, { 0x82, 0xd, 0x9d, 0xaf, 0x9a, 0x3b, 0xb4, 0xa2}}
+gSaDataHobGuid = {0xe07d0bda, 0xbf90, 0x46a9, { 0xb0, 0x0e, 0xb2, 0xc4, 0x4a, 0x0e, 0xd6, 0xd0}}
+gPsmiDataHobGuid = {0xa9652bd, 0x6acd, 0x47e5, { 0x80, 0x3a, 0x9, 0x53, 0x7b, 0xd2, 0xa8, 0x48 }}
+gSaConfigHobGuid = {0x762fa2e6, 0xea3b, 0x41c8, { 0x8c, 0x52, 0x63, 0x76, 0x6d, 0x70, 0x39, 0xe0}}
+gCpuPcieHobGuid = {0x440ab2e5, 0xa3ea, 0x466f, { 0x84, 0x96, 0xdf, 0xb1, 0x3b, 0x75, 0x29, 0x95}}
+gSaPegHobGuid = {0x5807c388, 0xfa06, 0x4683, { 0xab, 0xd3, 0x1b, 0x31, 0xbb, 0x81, 0x2d, 0x23}}
+gHgAcpiTableStorageGuid = {0x8de8964f, 0x2939, 0x4b49, { 0xa3, 0x48, 0xf6, 0xb2, 0xb2, 0xde, 0x4a, 0x42}}
+gSaSsdtAcpiTableStorageGuid = {0xca89914d, 0x2317, 0x452e, { 0xb2, 0x45, 0x36, 0xc6, 0xfb, 0x77, 0xa9, 0xc6}}
+gSegSsdtAcpiTableStorageGuid = {0x10c3800d, 0xe225, 0x480e, { 0x85, 0xda, 0xbe, 0xed, 0xdb, 0x88, 0xe1, 0xc6}}
+gHgAcpiTablePchStorageGuid = {0xe3164526, 0x690a, 0x4e0d, { 0xb0, 0x28, 0xae, 0xa1, 0x6f, 0xe2, 0xbc, 0xf3}}
+gSaMiscPeiPreMemConfigGuid = {0x4a525577, 0x3469, 0x4f11, { 0x99, 0xcf, 0xfb, 0xcd, 0x5e, 0xf1, 0x84, 0xe4}}
+gSaMiscPeiConfigGuid = {0x1def8e6, 0xe998, 0x4e27, { 0x89, 0x98, 0x9c, 0xfa, 0xb2, 0x92, 0xbc, 0x50}}
+gCpuPciePeiPreMemConfigGuid = { 0x81baf3c9, 0xf295, 0x4572, { 0x8b, 0x21, 0x79, 0x3f, 0xa3, 0x1b, 0xa5, 0xdb}}
+gCpuDmiPreMemConfigGuid = { 0x30d12ad5, 0xa3c6, 0x49c7, { 0xa2, 0xfd, 0x35, 0x5c, 0xcb, 0x61, 0xcb, 0xcf}}
+gVmdPeiConfigGuid = { 0x79b52c74, 0xb9ba, 0x4f36, {0xa2, 0x40, 0xf2, 0x41, 0x0d, 0x20, 0x84, 0x8a}}
+gVmdInfoHobGuid = { 0xccd0306e, 0x7fa1, 0x4df5, {0x99, 0x99, 0xc1, 0xf8, 0x9a, 0x1d, 0x1b, 0xa9}}
+gEfiVmdFeatureVariableGuid = { 0x61a14fe8, 0x4dab, 0x4a19, {0xb1, 0xe3, 0x97, 0xfb, 0x23, 0xd0, 0x92, 0x12}}
+gPramPreMemConfigGuid = { 0xcf0b9b31, 0xa1a6, 0x46d9, { 0x8d, 0x14, 0xe3, 0xac, 0x69, 0x0f, 0x52, 0x3a}}
+gHybridGraphicsConfigGuid = { 0xc7956998, 0xc065, 0x46c4, { 0x8e, 0x2f, 0x58, 0x2b, 0x67, 0xeb, 0xbe, 0x2f}}
+gHybridGraphicsInfoHobGuid = { 0x46cbed07, 0x717a, 0x4a75, { 0x85, 0xb3, 0xf4, 0xb6, 0xc4, 0xe2, 0x3a, 0x75}}
+gMemoryConfigGuid = { 0x26cf084c, 0xc9db, 0x41bb, { 0x92, 0xc6, 0xd1, 0x97, 0xb8, 0xa1, 0xe4, 0xbf}}
+gMemoryConfigNoCrcGuid = { 0xc56c73d0, 0x1cdb, 0x4c0c, { 0xa9, 0x57, 0xea, 0x62, 0xa9, 0xe6, 0xf5, 0x0c}}
+gGnaConfigGuid = { 0x53e0ef18, 0xb8a8, 0x4795, { 0xa6, 0x6d, 0xe4, 0x77, 0x2c, 0xc3, 0xae, 0x82}}
+gVtdDxeConfigGuid = {0xcbbf1996, 0x4a4c, 0x4dd9, {0xab, 0xbe, 0x83, 0x89, 0x73, 0xd, 0x48, 0xb0}}
+gPcieDxeConfigGuid = {0x1ed2d6f1, 0xa9d2, 0x476e, {0x8e, 0x74, 0xad, 0xd9, 0x5b, 0x5, 0x10, 0x82}}
+gMemoryDxeConfigGuid = {0xa5c7dda8, 0x686b, 0x404f, {0x86, 0x40, 0xf8, 0x2, 0xd, 0x84, 0x4c, 0x94}}
+gFspReservedMemoryResourceHobTsegGuid = { 0xd038747c, 0xd00c, 0x4980, { 0xb3, 0x19, 0x49, 0x01, 0x99, 0xa4, 0x7d, 0x55}}
+gCpuPcieRpPrememConfigGuid = { 0x41aef892, 0xc800, 0x4ac0, {0xa9, 0x30, 0x84, 0xac, 0x47, 0xca, 0xca, 0x7e}}
+gCpuPcieRpConfigGuid = { 0x9749a5fb, 0x9130, 0x44f0, {0x8f, 0x61, 0xdb, 0xff, 0x8e, 0xf2, 0xca, 0xc7}}
+## Include/Guid/AcpiS3Context.h
+gEfiAcpiVariableGuid = {0xaf9ffd67, 0xec10, 0x488a, {0x9d, 0xfc, 0x6c, 0xbf, 0x5e, 0xe2, 0x2c, 0x2e}}
+## IntelFsp2Pkg/IntelFsp2Pkg.dec gSiMemoryS3DataGuid is the same as gFspNonVolatileStorageHobGuid
+gSiMemoryS3DataGuid = { 0x721acf02, 0x4d77, 0x4c2a, { 0xb3, 0xdc, 0x27, 0x0b, 0x7b, 0xa9, 0xe4, 0xb0 } }
+gSiMemoryInfoDataGuid = { 0x9b2071d4, 0xb054, 0x4e0c, { 0x8d, 0x09, 0x11, 0xcf, 0x8b, 0x9f, 0x03, 0x23 } }
+gSiMemoryPlatformDataGuid = { 0x6210d62f, 0x418d, 0x4999, { 0xa2, 0x45, 0x22, 0x10, 0x0a, 0x5d, 0xea, 0x44 } }
+## Include/MrcRmtData.h
+gEfiMemorySchemaGuid = { 0xCE3F6794, 0x4883, 0x492C, { 0x8D, 0xBA, 0x2F, 0xC0, 0x98, 0x44, 0x77, 0x10}}
+gMrcSchemaListHobGuid = { 0x3047C2AC, 0x5E8E, 0x4C55, { 0xA1, 0xCB, 0xEA, 0xAD, 0x0A, 0x88, 0x86, 0x1B}}
+gRmtResultMetadataGuid = { 0x02CB1552, 0xD659, 0x4232, { 0xB5, 0x1F, 0xCA, 0xB1, 0xE1, 0x1F, 0xCA, 0x87}}
+gRmtResultColumnsGuid = { 0x0E60A1EB, 0x331F, 0x42A1, { 0x9D, 0xE7, 0x45, 0x3E, 0x84, 0x76, 0x11, 0x54}}
+gMargin2DResultMetadataGuid = { 0x48265582, 0x8E49, 0x4AC7, { 0xAA, 0x06, 0xE1, 0xB9, 0xA7, 0x4C, 0x97, 0x16}}
+gMargin2DResultColumnsGuid = { 0x91A449EC, 0x8A4A, 0x4736, { 0xAD, 0x71, 0xA3, 0xF6, 0xF6, 0xD7, 0x52, 0xD9}}
+gSaFspErrorTypePeiGopInit = { 0x8106a5cc, 0x30ba, 0x41cf, { 0xa1, 0x78, 0x63, 0x38, 0x91, 0x11, 0xae, 0xb2}}
+gSaFspErrorTypePeiGopGetMode = { 0x348cc7fe, 0x1e9a, 0x4c7a, { 0x86, 0x28, 0xae, 0x48, 0x5b, 0x42, 0x10, 0xf0}}
+gSaFspErrorTypeCallerId = { 0x98230916, 0xe632, 0x49ff, { 0x81, 0x81, 0x55, 0xce, 0xe5, 0x10, 0x36, 0x89}}
+gMrcFspErrorTypeCallerId = { 0x5a47c211, 0x642f, 0x4f92, { 0x9c, 0xb3, 0x7f, 0xeb, 0x93, 0xda, 0xdd, 0xba}}
+gMrcFspErrorTypeMemoryInit = { 0x5de1c071, 0x2c9c, 0x4a53, { 0x80, 0x21, 0x4e, 0x80, 0xd2, 0x5d, 0x44, 0xa8}}
+gSaPciePeiConfigGuid = { 0xdaa929a9, 0x5ec9, 0x486a, { 0xb0, 0xf7, 0x82, 0x3a, 0x55, 0xc7, 0xb5, 0xb3}}
+gSaPciePeiPreMemConfigGuid = { 0xfc5e01a3, 0x69f6, 0x4e35, { 0x9f, 0xcf, 0x6, 0x68, 0x7b, 0xab, 0x31, 0xd7}}
+
+
+#
+# Host Bridge
+#
+gHostBridgePeiPreMemConfigGuid = {0xbdef6805, 0x2080, 0x44ad, { 0x93, 0x2e, 0x00, 0x04, 0xf5, 0x2c, 0xb7, 0xa1}}
+gHostBridgePeiConfigGuid = {0x3b6d998e, 0x8b6e, 0x4f53, { 0xbe, 0x41, 0x7, 0x41, 0x95, 0x53, 0x8a, 0xaf}}
+gHostBridgeDataHobGuid = {0x3b682d57, 0xd402, 0x40a6, { 0xb1, 0x34, 0xa0, 0xc4, 0xf6, 0x31, 0x1d, 0x9}}
+
+#
+# Graphics
+#
+gGraphicsPeiPreMemConfigGuid = {0x0319c56b, 0xc43a, 0x42f1, { 0x80, 0xbe, 0xca, 0x5b, 0xd1, 0xd5, 0xc9, 0x28}}
+gGraphicsPeiConfigGuid = {0x04249ac0, 0x0088, 0x439f, { 0xa7, 0x4e, 0xa7, 0x04, 0x2a, 0x06, 0x2f, 0x5d}}
+gGraphicsDxeConfigGuid = {0x34d93161, 0xf78e, 0x4915, {0xad, 0xc4, 0xdb, 0x67, 0x16, 0x42, 0x39, 0x24}}
+gGraphicsAcpiTableStorageGuid = {0xce9caa0e, 0x8248, 0x442c, { 0x9e, 0x57, 0x50, 0xf2, 0x12, 0xe2, 0xba, 0xed}}
+## IpBlock/Graphics/IncludePrivate/GraphicsDataHob.h
+gGraphicsDataHobGuid = { 0x48e6e20a, 0x9110, 0x4332, { 0x8c, 0x9f, 0x5f, 0x7c, 0xae, 0x76, 0xfc, 0xf3}}
+
+#
+# IPU
+#
+gIpuPreMemConfigGuid = { 0x830a222b, 0x3ff5, 0x432e, { 0x9d, 0xd5, 0x4e, 0xe3, 0xfc, 0xa2, 0xaa, 0xa2}}
+gIpuAcpiTableStorageGuid = {0x9b25dba6, 0x45b3, 0x4190, { 0x99, 0x8d, 0xaf, 0x31, 0xdc, 0x21, 0x78, 0x21}}
+
+## Include/SsaCommonConfig.h
+gSsaPostcodeHookGuid = {0xADF0A27B, 0x61A6, 0x4F18, {0x9E, 0xAC, 0x46, 0x87, 0xE7, 0x9E, 0x6F, 0xBB}}
+gSsaBiosVariablesGuid = {0x43eeffe8, 0xa978, 0x41dc, {0x9d, 0xb6, 0x54, 0xc4, 0x27, 0xf2, 0x7e, 0x2a}}
+gSsaBiosResultsGuid = {0x8f4e928, 0xf5f, 0x46d4, {0x84, 0x10, 0x47, 0x9f, 0xda, 0x27, 0x9d, 0xb6}}
+gHobUsageDataGuid = {0xc764a821, 0xec41, 0x450d, { 0x9c, 0x99, 0x27, 0x20, 0xfc, 0x7c, 0xe1, 0xf6 }}
+##
+## TBT
+##
+gPeiITbtConfigGuid = {0xd7e7e1e6, 0xcbec, 0x4f5f, {0xae, 0xd3, 0xfd, 0xc0, 0xa8, 0xb0, 0x7e, 0x25}}
+gDxeITbtConfigGuid = {0x196bf9e3, 0x20d7, 0x4b7b, {0x89, 0xf9, 0x31, 0xc2, 0x72, 0x08, 0xc9, 0xb9}}
+gITbtInfoHobGuid = {0x74a81eaa, 0x033c, 0x4783, {0xbe, 0x2b, 0x84, 0x85, 0x74, 0xa6, 0x97, 0xb7}}
+
+##
+## TCSS
+##
+gTcssHobGuid = { 0x455702ce, 0x4adb, 0x45d9, { 0x8b, 0x27, 0xf7, 0xb0, 0xd9, 0x79, 0x8a, 0xe0}}
+gTcssSsdtAcpiTableStorageGuid = { 0xbd53572c, 0x6486, 0x45e2, { 0x90, 0xe, 0xb9, 0x8a, 0xc1, 0xa8, 0x25, 0x45}}
+gTcssPeiConfigGuid = { 0xfb631590, 0x79c9, 0x4f0d, { 0xa9, 0x96, 0xee, 0xe2, 0x98, 0x66, 0xfa, 0xfd}}
+gTcssPeiPreMemConfigGuid = { 0x514ed829, 0xb2bb, 0x46be, { 0xa9, 0x78, 0x6d, 0xc, 0x91, 0xc1, 0xeb, 0xe4}}
+gTcssSsidHobGuid = { 0x8903d47a, 0x8f82, 0x4063, { 0xa8, 0x40, 0x31, 0x68, 0x9c, 0x9e, 0x78, 0x20}}
+##
+## Telemetry
+##
+gTelemetryPeiConfigGuid = { 0x8ebf9fee, 0x7496, 0x42b4, { 0xa6, 0xf6, 0xcf, 0x2b, 0x33, 0x99, 0x30, 0xd6}}
+gTelemetryPeiPreMemConfigGuid = { 0x422de269, 0xb2ef, 0x4829, { 0x93, 0x36, 0x0b, 0xe4, 0x98, 0xb5, 0x53, 0xb2}}
+
+##
+## VTD
+##
+gVtdDataHobGuid = {0x1d60dce8, 0x503a, 0x44a8, { 0xb3, 0x2d, 0x56, 0xb3, 0x88, 0xf3, 0x4c, 0x55}}
+gVtdConfigGuid = {0x03e5cf63, 0xbebb, 0x4041, { 0xb7, 0xe7, 0xbf, 0x54, 0x61, 0x20, 0xf1, 0xc5}}
+
+#
+# TRACEHUB
+#
+gCpuTraceHubPreMemConfigGuid = { 0xf2e17477, 0x93f3, 0x430d, { 0x9e, 0x08, 0x3c, 0xcc, 0x6e, 0x2f, 0x6c, 0x4b}}
+gTraceHubDataHobGuid = { 0xf1187e54, 0x995f, 0x49d9, { 0xac, 0xee, 0xc5, 0x34, 0xf4, 0x5a, 0x18, 0xc7}}
+
+##
+## Cpu
+##
+gSmramCpuDataHeaderGuid = {0x5848fd2d, 0xd6af, 0x474b, {0x82, 0x75, 0x95, 0xdd, 0xe7, 0x0a, 0xe8, 0x23}}
+gCpuAcpiTableStorageGuid = {0xc38fb0e2, 0x0c43, 0x49c9, {0xb5, 0x44, 0x9b, 0x17, 0xaa, 0x4d, 0xcb, 0xa3}}
+gTxtInfoHobGuid = {0x2986883f, 0x88e0, 0x48d0, {0x4b, 0x82, 0x20, 0xc2, 0x69, 0x48, 0xdd, 0xac}}
+gHtBistHobGuid = {0xbe644001, 0xe7d4, 0x48b1, {0xb0, 0x96, 0x8b, 0xa0, 0x47, 0xbc, 0x7a, 0xe7}}
+gProcessorProducerGuid = {0x1bf06aea, 0x5bec, 0x4a8d, {0x95, 0x76, 0x74, 0x9b, 0x09, 0x56, 0x2d, 0x30}}
+gCpuInitDataHobGuid = {0x266e31cc, 0x13c5, 0x4807, {0xb9, 0xdc, 0x39, 0xa6, 0xba, 0x88, 0xff, 0x1a}}
+gBiosGuardHobGuid = {0x66f0c42d, 0x0d0e, 0x4c23, {0x93, 0xc0, 0x2d, 0x52, 0x95, 0xdc, 0x5e, 0x21}}
+gCpuSecurityPreMemConfigGuid = {0xfd5c346, 0x8260, 0x4067, {0x94, 0x69, 0xcf, 0x91, 0x68, 0xa3, 0x42, 0x90}}
+gCpuConfigLibPreMemConfigGuid = {0xfc1c0ec2, 0xc6b4, 0x4f05, {0xbb, 0x85, 0xc8, 0x0, 0x8d, 0x5b, 0x4a, 0xb7}}
+gCpuTxtPreMemConfigGuid = {0x20b4db03, 0xd160, 0x4f83, {0xa4, 0x1, 0x9a, 0x8a, 0xa8, 0x88, 0x68, 0x14}}
+gCpuTestConfigGuid = {0xd4dba957, 0xd9c, 0x4af2, {0x9d, 0x40, 0x35, 0xa8, 0x44, 0xe4, 0x93, 0xad}}
+gBiosGuardConfigGuid = {0x762f9ddb, 0x1c89, 0x4612, {0x84, 0x6b, 0xee, 0xdc, 0x8f, 0x62, 0x25, 0x45}}
+gCpuConfigGuid = {0x48c3aac9, 0xd66c, 0x42e4, {0x9b, 0x1d, 0x39, 0x4, 0x5f, 0x46, 0x53, 0x41}}
+gCpuPidTestConfigGuid = {0x2511095f, 0xd49e, 0x4537, {0xa6, 0x60, 0x88, 0x71, 0x31, 0xd1, 0x53, 0xda}}
+gCpuPowerMgmtBasicConfigGuid = {0xa021e31d, 0x7c14, 0x47da, {0xb5, 0xec, 0xca, 0xbb, 0x4d, 0x76, 0xed, 0xc8}}
+gCpuPowerMgmtCustomConfigGuid = {0x562fa1c8, 0x55ee, 0x4e2f, {0x91, 0xca, 0x8d, 0x84, 0x50, 0x3, 0x2f, 0xe}}
+gCpuPowerMgmtPsysConfigGuid = {0x4e7f850, 0x19b5, 0x47ba, {0x9d, 0x28, 0xb1, 0xe7, 0x5e, 0x1f, 0x48, 0x53}}
+gCpuPowerMgmtTestConfigGuid = {0x5161ed3d, 0x90bf, 0x436f, {0xb8, 0x33, 0xd7, 0x17, 0x89, 0xb3, 0x48, 0xc1}}
+gCpuPowerMgmtVrConfigGuid = {0x254766c9, 0x929d, 0x4eac, {0x9e, 0xec, 0xdf, 0xa2, 0x2, 0x44, 0xb5, 0xea}}
+gTxtPrivateBaseHobGuid = {0x651EBDB4, 0x4E1D, 0x422A, {0x82, 0xFB, 0x1E, 0xDA, 0x66, 0x71, 0x6C, 0x0B}}
+gTxtAcmInfoTableGuid = {0x7FC03AAA, 0x46A7, 0x18DB, {0x2E, 0xAC, 0x69, 0x8F, 0x8D, 0x41, 0x7F, 0x5A}}
+gOverclockingPreMemConfigGuid = {0xad151bbc, 0xd5a0, 0x481e, {0x9d, 0x19, 0xf6, 0x7b, 0x79, 0xe9, 0x8f, 0x68}}
+gCpuDataHobGuid = {0x1eec629f, 0xf3cf, 0x4b02, { 0xa9, 0xa5, 0x27, 0xa2, 0x33, 0x20, 0xbe, 0x5d}}
+
+##
+## Me
+##
+gMePlatformReadyToBootGuid = {0x03fdf171, 0x1d67, 0x4ace, {0xa9, 0x04, 0x3e, 0x36, 0xd3, 0x38, 0xfa, 0x74}}
+gMeSsdtAcpiTableStorageGuid = {0x9a8f82d5, 0x39b1, 0x48da, {0x92, 0xdc, 0xa2, 0x2d, 0xa8, 0x83, 0x4d, 0xf6}}
+gMeDataHobGuid = {0x1e94f097, 0x5acd, 0x4089, {0xb2, 0xe3, 0xb9, 0xa5, 0xc8, 0x79, 0xa7, 0x0c}}
+gMeEDebugHobGuid = {0x5f672ec1, 0xa8f6, 0x47d3, {0x9c, 0xd0, 0x92, 0xe9, 0xe9, 0xe0, 0xb3, 0x84}}
+gPciImrHobGuid = {0x49b1eac3, 0x0cd6, 0x451e, {0x96, 0x30, 0x92, 0x4b, 0xc2, 0x69, 0x35, 0x86}}
+gTpm2AcpiTableStorageGuid = {0x7d279373, 0xeecc, 0x4d4f, {0xae, 0x2f, 0xce, 0xc4, 0xb7, 0x06, 0xb0, 0x6a}}
+gMeBiosPayloadHobGuid = {0x992c52c8, 0xbc01, 0x4ecd, {0x20, 0xbf, 0xf9, 0x57, 0x16, 0x0e, 0x9e, 0xf7}}
+gEfiTouchPanelGuid = {0x91b1d27b, 0xe126, 0x48d1, {0x82, 0x34, 0xd2, 0x8b, 0x81, 0xc8, 0x83, 0x62}}
+gMeFwHobGuid = {0x52885e62, 0x4c4d, 0x9546, {0x2d, 0xba, 0x2a, 0x84, 0x89, 0xee, 0xa8, 0xa3 }}
+gMePeiPreMemConfigGuid = {0x67ed113b, 0xd4ab, 0x43f5, {0x9c, 0x3c, 0x35, 0x44, 0x15, 0xaa, 0x47, 0x5c}}
+gMePeiConfigGuid = {0x9bad5628, 0x657b, 0x48e3, {0xb1, 0x11, 0xc3, 0xb9, 0xeb, 0xea, 0xee, 0x17}}
+gMeDxeConfigGuid = {0xad08bacc, 0x4906, 0x4d9b, {0xbe, 0xd1, 0x81, 0xa5, 0x2c, 0x13, 0xdb, 0xf8}}
+gIvmProtocolGuid = {0x3C4852D6, 0xD47B, 0x4F46, {0xB0, 0x5E, 0xB5, 0xED, 0xC1, 0xAA, 0x44, 0x0E}}
+gSdmProtocolGuid = {0xDBA4D603, 0xD7ED, 0x4931, {0x88, 0x23, 0x17, 0xAD, 0x58, 0x57, 0x05, 0xD5}}
+gRtmProtocolGuid = {0x5565A099, 0x7FE2, 0x45C1, {0xA2, 0x2B, 0xD7, 0xE9, 0xDF, 0xEA, 0x9A, 0x2E}}
+gSvmProtocolGuid = {0xF47ACC04, 0xD94B, 0x49CA, {0x87, 0xA6, 0x7F, 0x7D, 0xC0, 0x3F, 0xBA, 0xF3}}
+gMeEopDoneHobGuid = {0x247323af, 0xc8f1, 0x4b8c, {0x90, 0x87, 0xaa, 0x4b, 0xa7, 0xb7, 0x6d, 0x6a}}
+gMePreMemPolicyHobGuid = {0xe6de74a5, 0x21b, 0x4f78, {0xa3, 0xcd, 0x34, 0xd6, 0x7e, 0xe4, 0x82, 0xbf}}
+gMePolicyHobGuid = {0x0341cf17, 0xbc8f, 0x4a20, {0xac, 0x28, 0x6c, 0x3c, 0x32, 0x4c, 0xd4, 0x17}}
+gMeFspErrorTypeEop = {0x948585c4, 0x76a4, 0x45bb, {0xbe, 0x6c, 0x39, 0x61, 0xc3, 0xab, 0xde, 0x15}}
+gMeFspErrorTypeCallerId = {0x1f4dc7e9, 0x26ca, 0x4336, { 0x8c, 0xe3, 0x39, 0x31, 0x3, 0xb5, 0xf3, 0xd7}}
+gMeConfigSpaceGuid = {0xcb405fd3, 0x4404, 0x4ccd, {0x85, 0x18, 0x0d, 0x03, 0x07, 0x48, 0xd0, 0xa6}}
+gMeDidSentHobGuid = {0x4c3d3af1, 0x1720, 0x4c3f, {0xab, 0x7c, 0x36, 0x50, 0xbb, 0x5b, 0x85, 0x7e}}
+gMeDisabledEventHobGuid = {0x1500b6a7, 0xb82f, 0x456b, {0xba, 0x2b, 0x4, 0x72, 0x41, 0x6, 0xf, 0x7}}
+gMeSavedPmconHobGuid = {0xb8baee93, 0xea15, 0x4ddc, {0x90, 0xb8, 0x44, 0x12, 0xd2, 0xea, 0xcf, 0x4f}}
+
+##
+## Amt
+##
+gAmtForcePushPetPolicyGuid = {0xacc8e1e4, 0x9f9f, 0x4e40, {0xa5, 0x7e, 0xf9, 0x9e, 0x52, 0xf3, 0x4c, 0xa5}}
+gAmtForcePushPetVariableGuid = {0xd7ac94af, 0xa498, 0x45ec, {0xbf, 0xa2, 0xa5, 0x6e, 0x95, 0x34, 0x61, 0x8b}}
+gMeBiosExtensionSetupGuid = {0xaf013532, 0xc828, 0x4fbd, {0x20, 0xae, 0xfe, 0xe6, 0xaf, 0xbe, 0xdd, 0x4e}}
+gAmtPetQueueHobGuid = {0xca0801d3, 0xafb1, 0x4dec, {0x9b, 0x65, 0x93, 0x65, 0xec, 0xc7, 0x93, 0x6b}}
+gAmtForcePushPetHobGuid = {0x4efa0db6, 0x26dc, 0x4bb1, {0xa7, 0x6f, 0x14, 0xbc, 0x63, 0x0c, 0x7b, 0x3c}}
+gAmtPeiConfigGuid = {0x7254546a, 0xace3, 0x4a32, {0x9a, 0xc2, 0xf0, 0xcc, 0x28, 0x4e, 0x1e, 0x4d}}
+gAmtDxeConfigGuid = {0x3f12ab6b, 0xb04d, 0x4824, {0xbf, 0xb6, 0x3e, 0xe7, 0x5d, 0x02, 0x0b, 0x84}}
+gAmtPolicyHobGuid = {0x703eb2cd, 0x5ca8, 0x4233, {0x9d, 0xa3, 0x0d, 0x2d, 0x57, 0xe6, 0x73, 0x34}}
+gAmtMebxDataGuid = { 0x912e1538, 0x371d, 0x4ea6, { 0xa8, 0x41, 0xd7, 0x6a, 0x8, 0x93, 0x3a, 0x70}}
+
+##
+## PCH
+##
+gEfiSmbusArpMapGuid = {0x707be83e, 0x0bf6, 0x40a5, {0xbe, 0x64, 0x34, 0xc0, 0x3a, 0xa0, 0xb8, 0xe2}}
+gIrmtAcpiTableStorageGuid = {0x6684d675, 0xee06, 0x49b2, {0x87, 0x6f, 0x79, 0xc5, 0x8f, 0xdd, 0xa5, 0xb7}}
+gPchGlobalResetGuid = { 0x9db31b4c, 0xf5ef, 0x48bb, { 0x94, 0x2b, 0x18, 0x1f, 0x7e, 0x3a, 0x3e, 0x40 }}
+gI2c0MasterGuid = {0xa121a5db, 0xb0cb, 0x46ec, {0xa0, 0xcb, 0x27, 0xf8, 0xda, 0x72, 0xd4, 0x0e}}
+gI2c1MasterGuid = {0x55e3d0f9, 0xc954, 0x422d, {0x9c, 0x4c, 0xcc, 0x46, 0x12, 0x7c, 0x5b, 0xa8}}
+gI2c2MasterGuid = {0x9289aa40, 0xdf32, 0x474e, {0xb0, 0x3a, 0xc7, 0x7f, 0x76, 0xd3, 0x45, 0x21}}
+gI2c3MasterGuid = {0xd8b2c17f, 0x4117, 0x4166, {0x90, 0x17, 0x01, 0x68, 0xb4, 0x81, 0xac, 0x18}}
+gI2c4MasterGuid = {0x513d943d, 0x15d9, 0x4bd0, {0xb1, 0x41, 0x14, 0x50, 0x2b, 0xbf, 0xa9, 0xf2}}
+gI2c5MasterGuid = {0x50df382a, 0xb6bf, 0x4435, {0xae, 0xe6, 0x21, 0xf4, 0x85, 0x7c, 0xa8, 0xb4}}
+gChipsetInitHobGuid = {0xc1392859, 0x1f75, 0x446e, {0xb3, 0xf5, 0x83, 0x35, 0xfc, 0xc8, 0xd1, 0xc4}}
+
+gPchGeneralPreMemConfigGuid = {0xC65F62FA, 0x52B9, 0x4837, {0x86, 0xEB, 0x1A, 0xFB, 0xD4, 0xAD, 0xBB, 0x3E}}
+gDciPreMemConfigGuid = {0xAB4AF366, 0x2250, 0x40C3, {0x92, 0xDB, 0x36, 0x61, 0xC6, 0x71, 0x3C, 0x5A}}
+gWatchDogPreMemConfigGuid = {0xFBCE08CC, 0x60F2, 0x4BDF, {0xB7, 0x88, 0x09, 0xBB, 0x81, 0x65, 0x52, 0x2B}}
+gPchTraceHubPreMemConfigGuid = {0x8456c11, 0xdb85, 0x4914, {0x8d, 0x1a, 0xe5, 0xac, 0x64, 0x37, 0xe8, 0x96}}
+gPcieRpPreMemConfigGuid = {0x8377AB38, 0xF8B0, 0x476A, { 0x9C, 0xA1, 0x68, 0xEA, 0x78, 0x57, 0xD8, 0x2A}}
+gSmbusPreMemConfigGuid = {0x77A6E62C, 0x716B, 0x4386, {0x9E, 0x9C, 0x23, 0xA0, 0x2E, 0x13, 0x7B, 0x3A}}
+gLpcPreMemConfigGuid = {0xA6E6032F, 0x1E58, 0x407E, {0x9A, 0xB8, 0xC6, 0x30, 0xC6, 0xC4, 0x11, 0x8E}}
+gHsioPciePreMemConfigGuid = {0xE8FB0C12, 0x0DA1, 0x4A20, {0xB3, 0x36, 0xFB, 0x75, 0x93, 0x8C, 0xE0, 0x14}}
+gHsioSataPreMemConfigGuid = {0x732260D0, 0xA5C1, 0x4119, {0xAA, 0x0C, 0x93, 0xDC, 0xAC, 0x67, 0x0A, 0x31}}
+
+gPchGeneralConfigGuid = {0x6ED94C8C, 0x25F7, 0x4686, {0xB2, 0x46, 0xCA, 0x4D, 0xE2, 0x95, 0x4B, 0x5D}}
+gPchPcieConfigGuid = {0x0A53B507, 0x988B, 0x475C, {0xBF, 0x76, 0x33, 0xDE, 0x10, 0x6D, 0x94, 0x84}}
+gPchPcieRpDxeConfigGuid = {0x475530EA, 0xBD72, 0x416F, {0x98, 0x9F,0x48, 0x70, 0x5F, 0x14, 0x4E, 0xD9}}
+gSataConfigGuid = {0xF5F87B4F, 0xCC3C, 0x408D, {0x89, 0xE3, 0x61, 0xC5, 0x9C, 0x54, 0x07, 0xC4}}
+gRstConfigGuid = {0x43B6F112, 0x3851, 0x4DDC, {0x81, 0xB9, 0xE4, 0x5A, 0x2B, 0xE, 0xB3, 0x25}}
+gIoApicConfigGuid = {0x2873D0F1, 0x00F6, 0x40AB, {0xAC, 0x36, 0x9A, 0x68, 0xBA, 0x87, 0x3E, 0x6C}}
+gPchDmiConfigGuid = {0xB3A61210, 0x1CD3, 0x4797, {0x8E, 0xE6, 0xD3, 0x42, 0x9C, 0x4F, 0x17, 0xBD}}
+gFlashProtectionConfigGuid = {0xD0F71512, 0x9E32, 0x4CC9, {0xA5, 0xA3, 0xAD, 0x67, 0x9A, 0x06, 0x67, 0xB8}}
+gHdAudioPreMemConfigGuid = {0xD38F1E2B, 0x21B3, 0x43D1, {0x9F, 0xA8, 0xA5, 0xE1, 0x78, 0x73, 0x1E, 0x88}}
+gHdAudioConfigGuid = {0x7EB3CE7E, 0x82E0, 0x4CD7, {0xBD, 0xE5, 0xB2, 0xBF, 0x4E, 0x91, 0xC3, 0x4C}}
+gHdAudioDxeConfigGuid = {0x22EFC2DE, 0x66EB, 0x412D, {0x97, 0x17, 0xE7, 0x7A, 0xA1, 0x4E, 0x87, 0x76}}
+gInterruptConfigGuid = {0x09A2B815, 0xBE29, 0x45EF, {0xBF, 0xBF, 0x58, 0xEA, 0xAC, 0x5E, 0x29, 0x78}}
+gIshPreMemConfigGuid = {0x7C24E649, 0xC1F0, 0x4CF9, {0x87, 0x96, 0xE7, 0xA0, 0xEE, 0x34, 0x43, 0xF8}}
+gIshConfigGuid = {0x433AE2AA, 0xC5A6, 0x46ED, {0x94, 0x19, 0x1E, 0x5D, 0xB8, 0x1C, 0x57, 0x40}}
+gGbeConfigGuid = {0x4B2DE99E, 0x7517, 0x4D04, {0x8C, 0x02, 0xF1, 0x1A, 0x59, 0x2B, 0x14, 0x2F}}
+gTsnConfigGuid = {0x9E9A93CB, 0x0F4E, 0x4E56, {0x90, 0x2D, 0x6C, 0x76, 0xDE, 0x90, 0xF7, 0x71}}
+gLockDownConfigGuid = {0x8A838E0A, 0xA639, 0x46F0, {0xA9, 0xCE, 0x70, 0xC4, 0x85, 0xFB, 0xA8, 0x0D}}
+gP2sbConfigGuid = {0x2474DCB8, 0x4BB4, 0x49DA, {0x87, 0x83, 0x7C, 0xD3, 0xD3, 0x85, 0xFF, 0x07}}
+gPmConfigGuid = {0x93826157, 0xDC85, 0x4E34, {0xAE, 0xD9, 0x6E, 0xA1, 0x0D, 0xF9, 0xE3, 0xA7}}
+gScsConfigGuid = {0xF4DE6D52, 0xB5C9, 0x48C0, {0xA0, 0x4A, 0x68, 0x54, 0x20, 0x94, 0x05, 0xD0}}
+gScsInfoHobGuid = {0x94C5E85B, 0xAA6D, 0x481D, {0x8B, 0xBD, 0x54, 0xAA, 0xE2, 0x99, 0x78, 0xB2}}
+gSdCardConfigGuid = {0xD6A3038E, 0x50AE, 0x44B0, {0x93, 0xE2, 0xF7, 0x93, 0xF5, 0x90, 0x50, 0x27}}
+gEmmcConfigGuid = {0xE0C6FB5D, 0x5696, 0x47F3, {0x84, 0xE8, 0xCC, 0x6C, 0x68, 0xA4, 0xB2, 0x1D}}
+gUfsConfigGuid = {0x3AF25C55, 0x76B4, 0x4367, {0x85, 0xEF, 0x9D, 0x51, 0x2F, 0x2F, 0x8F, 0xA7}}
+gEmmcDxeConfigGuid = {0x59440AA6, 0xEB45, 0x4E36, {0xBC, 0x90, 0xBE, 0xF9, 0x0C, 0xB0, 0xC8, 0x18}}
+gSerialIoConfigGuid = {0x6CC06EBF, 0x0D34, 0x4340, {0xBC, 0x16, 0xDA, 0x09, 0xE5, 0x78, 0x3A, 0xDB}}
+gSerialIrqConfigGuid = {0x251701E7, 0xE266, 0x4623, {0x99, 0x68, 0x73, 0x8C, 0xD2, 0x23, 0x10, 0x96}}
+gSpiConfigGuid = {0x150360EF, 0x99BE, 0x4E43, {0x94, 0xBB, 0xBD, 0x40, 0x26, 0xCA, 0x34, 0x57}}
+gEspiConfigGuid = {0x60FBF3B8, 0x96D4, 0x4187, {0x84, 0x9E, 0xAA, 0xF7, 0x5C, 0x4B, 0xE1, 0xE3}}
+gThermalConfigGuid = {0x4416506D, 0x1197, 0x4722, {0xA5, 0xB4, 0x46, 0x11, 0xF9, 0x23, 0x9E, 0xAE}}
+gUsbConfigGuid = {0xB2DA9CCD, 0x6A8C, 0x4BB6, {0xB3, 0xE6, 0xCD, 0xFB, 0xB7, 0x66, 0x8B, 0xDE}}
+gUsb2PhyConfigGuid = {0x576C1134, 0x2E0C, 0xCB7D, {0xCD, 0x3F, 0xAC, 0x68, 0x2D, 0xAE, 0xD3, 0xF2}}
+gUsb3HsioConfigGuid = {0xF8AFC238, 0xF176, 0x12CE, {0xBE, 0xF4, 0x69, 0xF9, 0xB1, 0xAC, 0x40, 0xD5}}
+gPchPcieStorageDetectHobGuid = {0xC682F3F4, 0x2F46, 0x495E, {0x98, 0xAA, 0x43, 0x14, 0x4B, 0xA5, 0xA4, 0x85}}
+gCnviConfigGuid = {0xE53EBEF7, 0x103D, 0x4A70, {0x9B, 0x6A, 0x73, 0xEE, 0x5F, 0x4C, 0x8D, 0xF5}}
+gHsioConfigGuid = {0xE53EBEE7, 0x103D, 0x4A71, {0x9B, 0x6A, 0x74, 0xEE, 0x5F, 0x4C, 0x8D, 0xF5}}
+gPchRstHobGuid = {0x4ECA680C, 0x660D, 0x48F8, {0xAA, 0xD8, 0x94, 0xD6, 0x56, 0x10, 0xF9, 0x86}}
+gPchInfoHobGuid = {0x99FD5E18, 0xE262, 0x4E6A, {0x82, 0x66, 0x77, 0xD0, 0x36, 0x5F, 0xD6, 0x3E}}
+gGpioDxeConfigGuid = {0x06985984, 0xAFA3, 0x429C, {0x80, 0xCD, 0x69, 0x43, 0xF3, 0x38, 0x31, 0x4D}}
+gFivrConfigGuid = {0x68EE8BD4, 0x05F2, 0x4656, {0xAE, 0xE4, 0xAD, 0x10, 0xC7, 0x22, 0xC3, 0x4F}}
+gThcConfigGuid = {0x1B318AD1, 0xAA0D, 0x4764, {0x99, 0xFD, 0xBB, 0x2B, 0xF4, 0x7F, 0x7E, 0xD6}}
+gIehConfigGuid = {0x42C4D7F3, 0x981D, 0x4475, {0xA2, 0xAE, 0xAD, 0xCD, 0xD5, 0xCE, 0x87, 0x1E}}
+gRtcConfigGuid = {0x0E9259B8, 0x3DDE, 0x40C7, {0xAA, 0x5F, 0x94, 0x82, 0x9A, 0x86, 0x8F, 0xAF}}
+gCnviConfigGuid = {0xa660970e, 0x511b, 0x46bb, {0xa7, 0xb8, 0xec, 0xdd, 0xf5, 0xe2, 0x2d, 0x73}}
+gGpioCheckConflictHobGuid = {0x5603f872, 0xefac, 0x40ae, {0xb9, 0x7e, 0x13, 0xb2, 0xf8, 0x07, 0x80, 0x21}}
+gPsfConfigGuid = {0x49B12CF6, 0x0A56, 0x4B9F, {0xA8, 0x4C, 0xF5, 0x7D, 0x21, 0x23, 0x8C, 0x77}}
+gHybridStorageConfigGuid = {0x265CE069, 0xD8CF, 0x48BE, {0xAE, 0x12, 0x02, 0x4C, 0x25, 0x12, 0xFA, 0xF8}}
+gHybridStorageHobGuid = {0xFF91F620, 0x069E, 0x4191, {0x83, 0x73, 0x11, 0x60, 0x9F, 0x24, 0x90, 0xEB}}
+gAdrConfigGuid = {0x5B36A07C, 0x3BBF, 0x4D53, {0x8A, 0x2D, 0xE1, 0xCF, 0x97, 0x39, 0x0C, 0x65}}
+gSpiConfigGuid = {0xD61A6A07, 0xAD25, 0xBFC2, {0x8C, 0x60, 0xD0, 0xD1, 0xF4, 0x13, 0x14, 0xBC}}
+
+##
+## Fusa
+##
+gFusaConfigGuid = {0xF9225896, 0xA9C8, 0x4543, {0xBA, 0x9E, 0x53, 0x32, 0xD7, 0xBF, 0x8C, 0x2B}}
+gSiFusaInfoGuid = {0xcc7876ba, 0xee7b, 0x4bd4, {0x99, 0x4b, 0x7e, 0xc9, 0x74, 0xc9, 0xd8, 0x43}}
+
+##
+## SecurityPkg
+##
+## GUID used to "Tcg2PhysicalPresence" variable and "Tcg2PhysicalPresenceFlags" variable for TPM2 request and response.
+# Include/Guid/Tcg2PhysicalPresenceData.h
+gEfiTcg2PhysicalPresenceGuid = { 0xaeb9c5c1, 0x94f1, 0x4d02, { 0xbf, 0xd9, 0x46, 0x2, 0xdb, 0x2d, 0x3c, 0x54 }}
+gEfiTrEEPhysicalPresenceGuid = {0xf24643c2, 0xc622, 0x494e, {0x8a, 0x0d, 0x46, 0x32, 0x57, 0x9c, 0x2d, 0x5b}}
+gTcoWdtHobGuid = { 0x3e405418, 0x0d8c, 0x4f1a, { 0xb0, 0x55, 0xbe, 0xf9, 0x08, 0x41, 0x46, 0x8d }}
+
+##
+## UEFI Variable Support (Direct SPI and UFS)
+##
+gCseVariableStoragePpiInstanceGuid = { 0x9513730d, 0x06ce, 0x4cf6, { 0x9d, 0x95, 0xb0, 0x76, 0x31, 0xbc, 0xd5, 0xa9}}
+gFvbVariableStoragePpiInstanceGuid = { 0x5067b88a, 0xaa37, 0x414d, { 0xa3, 0xca, 0xc8, 0x37, 0xfc, 0xec, 0xd6, 0xf3}}
+gCseVariableStorageProtocolInstanceGuid = { 0x5d5ede0b, 0x5d93, 0x4aae, { 0xa8, 0xec, 0x08, 0x41, 0xd0, 0x53, 0x85, 0xc4}}
+gFvbVariableStorageProtocolInstanceGuid = { 0xe98252e8, 0xf209, 0x4ef5, { 0xab, 0x7e, 0x12, 0x69, 0x45, 0x14, 0x47, 0xbe}}
+gPeiVariableCacheHobGuid = { 0x35212b29, 0x128a, 0x4754, { 0xb9, 0x96, 0x62, 0x45, 0xcc, 0xa8, 0xa0, 0x66}}
+gCseVariableStorageSecurePreMemoryDataGuid = { 0xa1749e1e, 0x8ce1, 0x4310, { 0xbd, 0x3f, 0x64, 0xc9, 0x01, 0xc6, 0x13, 0xc2}}
+gCseVariableStorageGeneralDataAreaGuid = { 0x6d7a6128, 0x685b, 0x4f75, { 0x87, 0x87, 0xba, 0x93, 0x08, 0x60, 0x75, 0x0c}}
+gCseVariableStorageFileSystemGuid = { 0xdb798aca, 0x3533, 0x41c7, { 0x9a, 0x98, 0x00, 0x31, 0x1b, 0x66, 0x0a, 0x15}}
+gBugCheckVariableGuid = { 0xba57e015, 0x65b3, 0x4c3c, { 0xb2, 0x74, 0x65, 0x91, 0x92, 0xf6, 0x99, 0xe3}}
+
+##
+## PreMem Performance
+##
+gPerfPchPrePolicyGuid = {0x3112356F, 0xCC77, 0x4E82, {0x86, 0xD5, 0x3E, 0x25, 0xEE, 0x81, 0x92, 0xA4}}
+gPerfSiValidateGuid = {0x681F96E6, 0xF9CF, 0x464D, {0x97, 0x9A, 0xB1, 0x11, 0x33, 0xDE, 0x37, 0xA9}}
+gPerfPchValidateGuid = {0xD0FF37D6, 0xA569, 0x4058, {0xB3, 0xDA, 0x29, 0x0B, 0x38, 0xC5, 0x32, 0x25}}
+gPerfAmtValidateGuid = {0x9E949422, 0x4A7A, 0x4E41, {0xB0, 0xAB, 0x3C, 0x0D, 0x88, 0x0A, 0x00, 0xFF}}
+gPerfCpuValidateGuid = {0xB760CFCC, 0xDEEF, 0x4C7E, {0x99, 0x5B, 0xED, 0xFE, 0xF2, 0x23, 0xB2, 0x09}}
+gPerfMeValidateGuid = {0x8CF7A498, 0x588D, 0x4D39, {0xBD, 0xAC, 0x51, 0x0C, 0x31, 0xAF, 0x45, 0xD0}}
+gPerfSaValidateGuid = {0xA73B382B, 0x62D4, 0x4A19, {0xBB, 0xF9, 0x09, 0x3E, 0xC5, 0xA5, 0x93, 0x11}}
+gPerfHeciPreMemGuid = {0xD815D922, 0x4994, 0x40B3, {0x97, 0xCC, 0x07, 0xF3, 0x7D, 0x42, 0xE7, 0x97}}
+gPerfPchPreMemGuid = {0xBB73E2B1, 0xB9FD, 0x4A80, {0xB8, 0x1A, 0x52, 0x39, 0xE9, 0x4D, 0x06, 0x2E}}
+gPerfCpuPreMemGuid = {0xAC5FCBC6, 0x084D, 0x445D, {0xB3, 0xF3, 0xCA, 0x16, 0xDE, 0xE9, 0xBB, 0x47}}
+gPerfMePreMemGuid = {0x6051338E, 0x0FFA, 0x40F7, {0xAF, 0xEF, 0xAB, 0x86, 0x7A, 0x38, 0xCC, 0xF3}}
+gPerfAmtPreMemGuid = {0xDB732D50, 0x9BB8, 0x489A, {0xA1, 0xD1, 0xDD, 0xD2, 0x16, 0x1D, 0x72, 0xB8}}
+gPerfAmtPostMemGuid = {0x0329D610, 0x4269, 0xD28F, {0x61, 0xBF, 0xB9, 0xA2, 0xD9, 0xFA, 0x96, 0x93}}
+gPerfSaPreMemGuid = {0x76F18BDA, 0x2195, 0x4FB6, {0x9A, 0x94, 0x0E, 0x0B, 0xAC, 0xDE, 0xEC, 0xAB}}
+gPerfEvlGuid = {0x8221518B, 0xAC19, 0x4E32, {0xAB, 0x5F, 0x00, 0x47, 0x0A, 0x50, 0x69, 0x40}}
+gPerfMemGuid = {0x2B57B316, 0x5CF7, 0x4847, {0xB0, 0x76, 0x6B, 0x5D, 0x23, 0xC3, 0xAA, 0x3E}}
+
+##
+## PostMem Performance
+##
+gPerfPchPostMemGuid = {0x70B67A99, 0x5556, 0x4315, {0xB3, 0x05, 0xD5, 0xDC, 0x4A, 0x35, 0x63, 0x70}}
+gPerfSaPostMemGuid = {0x9FF0CE92, 0x883F, 0x43DC, {0x8A, 0x07, 0xE0, 0xCB, 0x6D, 0x56, 0x7D, 0xE0}}
+gPerfS3CpuInitPostMemGuid = {0x976262C2, 0xD202, 0x4D12, {0x82, 0xAD, 0xF4, 0xA9, 0x8F, 0x9B, 0x96, 0x01}}
+gPerfSaSecLockPostMemGuid = {0x272AC110, 0x0B60, 0x4D07, {0xA5, 0x58, 0x6D, 0x73, 0xE2, 0x43, 0x85, 0x95}}
+gPerfCpuStrapPostMemGuid = {0x8EF4372B, 0x68F0, 0x4957, {0xBC, 0x4D, 0x7E, 0x5C, 0xFE, 0xDA, 0xB6, 0x3E}}
+gPerfMpPostMemGuid = {0xA59BAC5B, 0xC6A4, 0x4AEB, {0x84, 0x32, 0x7A, 0x8B, 0x6B, 0x68, 0x5F, 0x37}}
+gPerfCpuPostMemGuid = {0xE2FE5ED3, 0x1417, 0x451A, {0x95, 0xC9, 0xD0, 0xB2, 0xB9, 0x7B, 0xE0, 0x54}}
+gPerfSaResetPostMemGuid = {0xBE152BEE, 0xFD19, 0x4274, {0xA8, 0xBA, 0xFB, 0x31, 0x42, 0xB5, 0xB5, 0xC3}}
+gPerfCpuPowerMgmtGuid = {0x9ED307D6, 0x4AEB, 0x44A9, {0x9B, 0x11, 0xD8, 0x21, 0x84, 0x9A, 0xCB, 0xF7}}
+gPerfMePostMemGuid = {0x2CC8626D, 0x3387, 0x4817, {0xAB, 0xF6, 0x86, 0x9A, 0xF5, 0xF0, 0x51, 0xAA}}
+gPerfHdaPostMemGuid = {0xB31883B7, 0x5A05, 0x4040, {0x40, 0x80, 0x66, 0x8D, 0x29, 0x13, 0xD7, 0x84}}
+
+##
+## Dp-In Guid
+##
+## Include/DpInDataHob.h
+gDpInHobGuid = {0x3e110a83, 0xb94b, 0x4648, {0xa2, 0x26, 0x50, 0x9b, 0xd5, 0x55, 0xe3, 0x6b}}
+## Include/ConfigBlock/Tcss/DpInPreMemConfig.h
+gDpInPreMemConfigGuid = {0x80c14ba, 0xcc84, 0x4746, {0xbf, 0x6b, 0xd1, 0xf1, 0x8e, 0xaa, 0xe8, 0x35}}
+
+[Protocols.common.Private]
+##
+## SA
+##
+gSaIotrapSmiProtocolGuid = { 0x1861e089, 0xcaa3, 0x473e, { 0x84, 0x32, 0xdc, 0x1f, 0x94, 0xc6, 0xc1, 0xa6 }}
+gCpuPcieIoTrapProtocolGuid = { 0xda904080, 0x33ab, 0x48ca, { 0x97, 0x5b, 0x5f, 0x2f, 0x23, 0x8a, 0x41, 0xb4 }}
+
+gPchPcieIoTrapProtocolGuid = { 0xd66a1cf, 0x79ad, 0x494b, { 0x97, 0x8b, 0xb2, 0x59, 0x81, 0x68, 0x93, 0x34 }}
+
+[Protocols]
+##
+## MdeModulePkg
+##
+gEfiSmmVariableProtocolGuid = {0xed32d533, 0x99e6, 0x4209, {0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7}}
+gEdkiiPlatformSpecificResetFilterProtocolGuid = { 0x695d7835, 0x8d47, 0x4c11, { 0xab, 0x22, 0xfa, 0x8a, 0xcc, 0xe7, 0xae, 0x7a } }
+gEdkiiPlatformSpecificResetHandlerProtocolGuid = { 0x2df6ba0b, 0x7092, 0x440d, { 0xbd, 0x4, 0xfb, 0x9, 0x1e, 0xc3, 0xf3, 0xc1 } }
+
+##
+## SystemAgent
+##
+gBdatAccessGuid = {0x9477482c, 0x8717, 0x4725, {0x98, 0x28, 0x7b, 0xd8, 0xc9, 0xa3, 0x75, 0x6a}}
+gIgdOpRegionProtocolGuid = {0x9e67aecf, 0x4fbb, 0x4c84, {0x99, 0xa5, 0x10, 0x73, 0x40, 0x7, 0x6d, 0xb4}}
+gMemInfoProtocolGuid = {0xd4d2f201, 0x50e8, 0x4d45, {0x8e, 0x5, 0xfd, 0x49, 0xa8, 0x2a, 0x15, 0x69}}
+gSaPolicyProtocolGuid = {0xc6aa1f27, 0x5597, 0x4802, {0x9f, 0x63, 0xd6, 0x28, 0x36, 0x59, 0x86, 0x35}}
+gSaNvsAreaProtocolGuid = {0x149a10a5, 0x9d06, 0x4c6b, {0xbe, 0x44, 0x08, 0x92, 0xce, 0x20, 0x61, 0xac}}
+gGopPolicyProtocolGuid = {0xec2e931b, 0x3281, 0x48a5, {0x81, 0x07, 0xdf, 0x8a, 0x8b, 0xed, 0x3c, 0x5d}}
+gGen12PolicyProtocolGuid = {0x40f60ea0, 0x6c96, 0x4ed3, {0x96, 0xe5, 0xba, 0x6f, 0x6d, 0x66, 0x28, 0x9f}}
+gGen9PolicyProtocolGuid = {0xeaaed1ba, 0xf15c, 0x4112, {0xb5, 0x82, 0x90, 0x63, 0xac, 0xa0, 0x7f, 0x06}}
+gGopComponentName2ProtocolGuid = {0x651b7ebd, 0xce13, 0x41d0, {0x82, 0xe5, 0xa0, 0x63, 0xab, 0xbe, 0x9b, 0xb6}}
+gGopOverrideProtocolGuid = {0x4a89a16e, 0x67b8, 0x4429, {0x8c, 0x47, 0x43, 0x67, 0x90, 0xf2, 0xf2, 0x69}}
+gMemoryAddressEncodeDecodeProtocolGuid = {0x603df7ca, 0x1ba8, 0x4c12, {0xa9, 0x8a, 0x49, 0x6d, 0xfe, 0x77, 0xeb, 0xdf}}
+
+##
+## TBT
+##
+gITbtPolicyProtocolGuid = {0xb0563c42, 0x28ea, 0x40e6, {0x99, 0x84, 0xd5, 0xbf, 0xf8, 0xb0, 0x40, 0x56}}
+gITbtNvsAreaProtocolGuid = {0xdabf85bd, 0xfbdc, 0x4ed2, {0xb1, 0x0d, 0xc9, 0x08, 0xd0, 0x8c, 0xee, 0xe8}}
+gDisableITbtBmeProtocolGuid = {0x89a9adc3, 0x9b7c, 0x4b53, {0x82, 0xbf, 0x78, 0x72, 0x6b, 0x91, 0x4f, 0x9f}}
+
+##
+## Cpu
+##
+gCpuInfoProtocolGuid = {0xe223cf65, 0xf6ce, 0x4122, {0xb3, 0xaf, 0x4b, 0xd1, 0x8a, 0xff, 0x40, 0xa1}}
+gSmmBiosGuardProtocolGuid = {0x17565311, 0x4b71, 0x4340, {0x88, 0xaa, 0xdc, 0x9f, 0x44, 0x22, 0xe5, 0x3a}}
+gCpuNvsAreaProtocolGuid = {0xb9cf3f43, 0xbe3e, 0x4e45, {0xa0, 0xbe, 0x1a, 0x4, 0x89, 0xdf, 0x1a, 0xc9}}
+gDxeCpuPolicyProtocolGuid = {0x8282b977, 0x22f9, 0x4134, {0x99, 0x43, 0x7b, 0xcc, 0x5f, 0x40, 0x33, 0x52}}
+gBiosGuardNvsAreaProtocolGuid = {0x5df588da, 0x991e, 0x4a7f, {0x80, 0x51, 0x70, 0xc7, 0x12, 0xb7, 0xba, 0xb0}}
+gSmmResourceConfigProtocolGuid = {0xA37FC2D2, 0x822D, 0x4A63, {0x9C, 0x42, 0xBE, 0xB1, 0xD6, 0xEE, 0x85, 0x39}}
+
+##
+## Me
+##
+gActiveManagementProtocolGuid = {0xd25dc167, 0xeb6a, 0x432d, {0x65, 0x91, 0xbf, 0x80, 0x29, 0xb0, 0x05, 0xbb}}
+gAlertStandardFormatProtocolGuid = {0x45de9920, 0xcd54, 0x446a, {0xa0, 0x3c, 0x22, 0xe6, 0xfb, 0xb4, 0x51, 0xe4}}
+gHeciProtocolGuid = {0x3c7bc880, 0x41f8, 0x4869, {0xae, 0xfc, 0x87, 0x0a, 0x3e, 0xd2, 0x82, 0x99}}
+gHeciFlowProtocolGuid = {0x1498d127, 0x123c, 0x4e52, {0x84, 0x00, 0xcc, 0x3c, 0x9f, 0x79, 0xc4, 0x0e}}
+gMebxProtocolGuid = {0x01ab1829, 0xcecd, 0x4cfa, {0xa1, 0x8c, 0xea, 0x75, 0xd6, 0x6f, 0x3e, 0x74}}
+gDxeMePolicyGuid = {0xa0b5dc52, 0x4f34, 0x3990, {0xd4, 0x91, 0x10, 0x8b, 0xe8, 0xba, 0x75, 0x42}}
+gMeInfoProtocolGuid = {0x7523c8e4, 0x4fbe, 0x9661, {0x29, 0x96, 0x14, 0x97, 0xff, 0x36, 0x2f, 0x3b}}
+gPlatformMeHookProtocolGuid = {0xbc52476e, 0xf67e, 0x4301, {0xb2, 0x62, 0x36, 0x9c, 0x48, 0x78, 0xaa, 0xc2}}
+gMeNvsAreaProtocolGuid = {0x3bffecfd, 0xd75f, 0x4975, {0xb8, 0x88, 0x39, 0x02, 0xbd, 0x69, 0x00, 0x2b}}
+gJhiProtocolGuid = {0xccba3051, 0xa574, 0x4f9d, {0x96, 0xf4, 0xec, 0x0d, 0x4a, 0x87, 0xbc, 0x5a}}
+gIntegratedTouchHidProtocolGuid = {0x3d0479c1, 0x6b19, 0x4191, {0xb8, 0x09, 0x60, 0x08, 0xdd, 0x07, 0x97, 0x55}}
+gIntegratedTouchProtocolGuid = {0x2b12e46f, 0x3c24, 0x47ff, {0x8b, 0x89, 0xc0, 0x60, 0x2c, 0x1c, 0x61, 0x42}}
+gMeEopDoneProtocolGuid = {0x8d9b3387, 0x73db, 0x456f, {0x88, 0x9d, 0x6f, 0xfe, 0x90, 0x82, 0x64, 0x09}}
+gMeSendEopInFspProtocolGuid = {0xcecdba92, 0x76c6, 0x4063, {0xaa, 0x6b, 0x19, 0xfc, 0x60, 0x5c, 0x70, 0xff}}
+
+gHeciAccessProtocolGuid = {0x3a5aab32, 0xd5a7, 0x4ce8, {0x88, 0xe2, 0xed, 0x8f, 0x7b, 0x43, 0x23, 0x9d}}
+gHeciTransportProtocolGuid = {0x9fc932b9, 0x8851, 0x43f7, {0x8a, 0x58, 0xa8, 0xd9, 0x04, 0x01, 0xcd, 0x78}}
+gHeciControlProtocolGuid = {0xd86381d8, 0xff7e, 0x462e, {0x9b, 0x55, 0x02, 0x0a, 0x64, 0x1b, 0xe3, 0x4f}}
+gHeciAccessSmmProtocolGuid = {0x5da6182c, 0xf679, 0x49eb, {0x96, 0xf5, 0xe6, 0x24, 0x9b, 0x54, 0x0b, 0x96}}
+gHeciTransportSmmProtocolGuid = {0xf5f7b292, 0xbb38, 0x4e59, {0xa1, 0x6e, 0x0f, 0x27, 0x15, 0xd4, 0xb7, 0xf4}}
+gHeciControlSmmProtocolGuid = {0x7e1e508d, 0x7def, 0x4d69, {0xa9, 0xb3, 0xa5, 0x23, 0xe8, 0x48, 0xc6, 0x98}}
+
+##
+## Amt
+##
+gAmtSaveMebxProtocolGuid = {0x86682c04, 0xea42, 0x49e5, {0x96, 0x81, 0xe3, 0x32, 0xaa, 0xb0, 0x9e, 0xd7}}
+gDxeAmtPolicyGuid = {0x6725e645, 0x4a7f, 0x9969, {0x82, 0xec, 0xd1, 0x87, 0x21, 0xde, 0x5a, 0x57}}
+gAmtReadyToBootProtocolGuid = {0xcc9d5c0b, 0x9010, 0x45f1, {0x99, 0x3c, 0x83, 0x27, 0x67, 0xf1, 0x67, 0x77}}
+gMeSmbiosTablesUpdateProtocolGuid = {0x5054ee06, 0x4ce0, 0x4acc, {0x9a, 0x80, 0xdf, 0x73, 0xbf, 0xa5, 0x38, 0xdd}}
+gOneClickRecoveryProtocolGuid = {0x93598eac, 0xc62b, 0x4dbb, {0x96, 0x76, 0xe0, 0x5e, 0x8c, 0xc3, 0x84, 0x44}}
+
+##
+## PCH
+##
+gThcProtocolGuid = {0x00860921, 0x7B9B, 0x4EA8, {0xAD, 0x23, 0x3C, 0xCA, 0x33, 0x9E, 0x7D, 0xFE}}
+gPchSpiProtocolGuid = {0xc7d289, 0x1347, 0x4de0, {0xbf, 0x42, 0xe, 0x26, 0x9d, 0xe, 0xf3, 0x4a}}
+gWdtProtocolGuid = {0xb42b8d12, 0x2acb, 0x499a, {0xa9, 0x20, 0xdd, 0x5b, 0xe6, 0xcf, 0x09, 0xb1}}
+gPchSerialIoUartDebugInfoProtocolGuid = {0x2fd2b1bd, 0x0387, 0x4ec6, {0x94, 0x1f, 0xf1, 0x4b, 0x7f, 0x1c, 0x94, 0xb6}}
+gEfiSmmSmbusProtocolGuid = {0x72e40094, 0x2ee1, 0x497a, {0x8f, 0x33, 0x4c, 0x93, 0x4a, 0x9e, 0x9c, 0x0c}}
+gPchSmmSpiProtocolGuid = {0x56521f06, 0xa62, 0x4822, {0x99, 0x63, 0xdf, 0x1, 0x9d, 0x72, 0xc7, 0xe1}}
+gPchSmmIoTrapControlGuid = {0x514d2afd, 0x2096, 0x4283, {0x9d, 0xa6, 0x70, 0x0c, 0xd2, 0x7d, 0xc7, 0xa5}}
+gPchTcoSmiDispatchProtocolGuid = {0x9e71d609, 0x6d24, 0x47fd, {0xb5, 0x72, 0x61, 0x40, 0xf8, 0xd9, 0xc2, 0xa4}}
+gPchPcieSmiDispatchProtocolGuid = {0x3e7d2b56, 0x3f47, 0x42aa, {0x8f, 0x6b, 0x22, 0xf5, 0x19, 0x81, 0x8d, 0xab}}
+gPchAcpiSmiDispatchProtocolGuid = {0xd52bb262, 0xf022, 0x49ec, {0x86, 0xd2, 0x7a, 0x29, 0x3a, 0x7a, 0x05, 0x4b}}
+gPchSmiDispatchProtocolGuid = {0xE6A81BBF, 0x873D, 0x47FD, {0xB6, 0xBE, 0x61, 0xB3, 0xE5, 0x72, 0x09, 0x93}}
+gPchNvsAreaProtocolGuid = {0x2e058b2b, 0xedc1, 0x4431, {0x87, 0xd9, 0xc6, 0xc4, 0xea, 0x10, 0x2b, 0xe3}}
+gPchEspiSmiDispatchProtocolGuid = {0xB3C14FF3, 0xBAE8, 0x456C, {0x86, 0x31, 0x27, 0xFE, 0x0C, 0xEB, 0x34, 0x0C}}
+gPchSmmPeriodicTimerControlGuid = {0x6906E93B, 0x603B, 0x4A0F, {0x86, 0x92, 0x83, 0x20, 0x04, 0xAA, 0xF2, 0xDB}}
+gIoTrapExDispatchProtocolGuid = {0x5B48E913, 0x707B, 0x4F9D, {0xAF, 0x2E, 0xEE, 0x03, 0x5B, 0xCE, 0x39, 0x5D}}
+gPchPolicyProtocolGuid = {0x543d5c93, 0x6a28, 0x4513, {0x85, 0x9a, 0x82, 0xa7, 0xb9, 0x12, 0xcb, 0xbe}}
+gScsEmmcSoftwareTuningProtocolGuid = {0x972215b2, 0x9616, 0x4de4, {0xa9, 0x75, 0xb0, 0x74, 0x3e, 0xe1, 0x78, 0x54}}
+
+##
+## Hsti
+##
+## HstiSiliconDxe Driver Entry Point
+gHstiProtocolGuid = { 0x1b05de41, 0xc93b, 0x4bb4, { 0xad, 0x47, 0x2a, 0x78, 0xac, 0xf, 0xc9, 0xe4 }}
+## Handler to gather and publish HSTI results on ReadyToBootEvent
+gHstiPublishCompleteProtocolGuid = {0x0f500be6, 0xece4, 0x4ed8, { 0x90, 0x81, 0x9a, 0xa9, 0xa5, 0x23, 0xfb, 0x7b}}
+gEfiAdapterInformationProtocolGuid = { 0xE5DD1403, 0xD622, 0xC24E, {0x84, 0x88, 0xC7, 0x1B, 0x17, 0xF5, 0xE8, 0x02 }}
+
+##
+## Silicon Policy
+##
+## Include/Protocol/SiPolicyProtocol.h
+gDxeSiPolicyProtocolGuid = { 0xeca27516, 0x306c, 0x4e28, { 0x8c, 0x94, 0x4e, 0x52, 0x10, 0x96, 0x69, 0x5e }}
+
+##
+## DGR
+##
+gEfiSpaLogOutputProtocolGuid = { 0x1d10d46b, 0x0306, 0x454a, { 0x90, 0x8c, 0x93, 0x65, 0xb3, 0x8a, 0x90, 0x26 }}
+
+[Ppis.common.Private]
+gPchHsioChipsetInitSusTblDataPpiGuid = { 0x97ed4e5d, 0x01a5, 0x4a3c, { 0xb7, 0xe9, 0x1a, 0x4e, 0xa3, 0xdd, 0x23, 0xce }}
+gHybridStorageCfgPpiGuid = {0x8557e481, 0xc00e, 0x4929, {0xb4, 0x53, 0xf6, 0xc2, 0x53, 0x79, 0xb0, 0x13}}
+
+[Ppis]
+##
+## MdeModulePkg
+##
+gPeiCapsulePpiGuid = {0x3acf33ee, 0xd892, 0x40f4, {0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d}}
+gPeiSmmControlPpiGuid = {0x61c68702, 0x4d7e, 0x4f43, {0x8d, 0xef, 0xa7, 0x43, 0x05, 0xce, 0x74, 0xc5}}
+gEdkiiPlatformSpecificResetFilterPpiGuid = { 0x8c9f4de3, 0x7b90, 0x47ef, { 0x93, 0x8, 0x28, 0x7c, 0xec, 0xd6, 0x6d, 0xe8 } }
+gEdkiiPlatformSpecificResetNotificationPpiGuid = { 0xe09f355d, 0xdae8, 0x4910, { 0xb1, 0x4a, 0x92, 0x78, 0xf, 0xdc, 0xf7, 0xcb } }
+gEdkiiPlatformSpecificResetHandlerPpiGuid = { 0x75cf14ae, 0x3441, 0x49dc, { 0xaa, 0x10, 0xbb, 0x35, 0xa7, 0xba, 0x8b, 0xab } }
+
+##
+## SecurityPkg
+##
+gPeiTpmInitializedPpiGuid = {0xe9db0d58, 0xd48d, 0x47f6, {0x9c, 0x6e, 0x6f, 0x40, 0xe8, 0x6c, 0x7b, 0x41}}
+gPeiTpmInitializationDonePpiGuid = {0xa030d115, 0x54dd, 0x447b, { 0x90, 0x64, 0xf2, 0x6, 0x88, 0x3d, 0x7c, 0xcc}}
+##
+## Common
+##
+## Include/Ppi/SiPolicy.h
+gSiPolicyPpiGuid = {0xaebffa01, 0x7edc, 0x49ff, {0x8d, 0x88, 0xcb, 0x84, 0x8c, 0x5e, 0x86, 0x70}}
+## Include/Ppi/SiPolicy.h
+gSiPreMemPolicyPpiGuid = {0xc133fe57, 0x17c7, 0x4b09, {0x8b, 0x3c, 0x97, 0xc1, 0x89, 0xd0, 0xab, 0x8d}}
+gFspApiModePpiGuid = {0xa1eeab87, 0xc859, 0x479d, {0x89, 0xb5, 0x14, 0x61, 0xf4, 0x06, 0x1a, 0x3e}}
+## Silicon Initialization PPI is used to export End of Silicon init.
+gEndOfSiInitPpiGuid = {0xE2E3D5D1, 0x8356, 0x4F96, {0x9C, 0x9E, 0x2E, 0xC3, 0x48, 0x1D, 0xEA, 0x88}}
+gEfiEndOfPeiSignal2PpiGuid = {0x22918381, 0xd018, 0x4d7c, {0x9d, 0x62, 0xf5, 0xa5, 0x70, 0x1c, 0x66, 0x80}}
+gFspTempRamExitPpiGuid = {0xbc1cfbdb, 0x7e50, 0x42be, {0xb4, 0x87, 0x22, 0xe0, 0xa9, 0x0c, 0xb0, 0x52}}
+gFspmArchConfigPpiGuid = {0x824d5a3a, 0xaf92, 0x4c0c, {0x9f, 0x19, 0x19, 0x52, 0x6d, 0xca, 0x4a, 0xbb}}
+gSiPreMemDefaultPolicyInitPpiGuid = {0xfec36242, 0xf8d8, 0x4b43, {0x87, 0x94, 0x4f, 0x1f, 0x9f, 0x63, 0x8d, 0xdc}}
+gSiPreMemPolicyReadyPpiGuid = {0x85270bef, 0x6984, 0x4375, {0xa6, 0xea, 0xb5, 0xaa, 0x90, 0x6e, 0xdd, 0x4a}}
+gSiDefaultPolicyInitPpiGuid = {0xf69abf86, 0x4048, 0x44ef, { 0xa8, 0xef, 0x6c, 0x7f, 0x20, 0x4a, 0xc8, 0xda}}
+gSiPolicyReadyPpiGuid = {0xd570de8c, 0xb9c4, 0x4ffa, {0xad, 0xee, 0xa5, 0x82, 0x7c, 0xe3, 0x17, 0x79}}
+
+##
+## UEFI Variable Support (Override Until BP1.5)
+##
+gEdkiiVariableStoragePpiGuid = { 0x90d915c5, 0xe4c1, 0x4da8, {0xa7, 0x6f, 0x9, 0xe5, 0x78, 0x91, 0x65, 0x48}}
+gEdkiiVariableStorageSelectorPpiGuid = { 0x782546d1, 0x03ab, 0x41e4, {0xa0, 0x1d, 0x7a, 0x9b, 0x22, 0xba, 0x2e, 0x1e}}
+gReadOnlyVariablePreMemoryDescriptorPpiGuid = { 0xbe136fc9, 0xc277, 0x4dd1, {0xbe, 0x42, 0xce, 0xf0, 0x9f, 0xf4, 0x3f, 0x55}}
+gEfiReadyToInstallEndOfPei2PpiGuid = {0xeef72924, 0x2db2, 0x4569, { 0x86, 0x3f, 0xd4, 0x86, 0xae, 0x7a, 0xe4, 0x12}}
+
+##
+## SystemAgent
+##
+gSsaBiosCallBacksPpiGuid = {0x99b56126, 0xe16c, 0x4d9b, {0xbb, 0x71, 0xaa, 0x35, 0x46, 0x1a, 0x70, 0x2f}}
+gSsaBiosServicesPpiGuid = {0x55750d10, 0x6d3d, 0x4bf5, {0x89, 0xd8, 0xe3, 0x5e, 0xf0, 0xb0, 0x90, 0xf4}}
+gEnablePeiGraphicsPpiGuid = {0x8e3bb474, 0x545, 0x4902, {0x86, 0xb0, 0x6c, 0xb5, 0xe2, 0x64, 0xb4, 0xa5}}
+gPeiGraphicsFramebufferReadyPpiGuid = {0x590ad868, 0xb0b1, 0x4d20, {0x91, 0xff, 0xc2, 0xa9, 0xd6, 0x88, 0x81, 0x94}}
+gMrcMemoryInitDonePpiGuid = {0x0ff07255, 0x67c2, 0x456d, {0x9a, 0x95, 0xc9, 0x16, 0x2c, 0x23, 0x86, 0x8d}}
+## X Compatibility support PPI
+gCompatibleMemoryInitPpiGuid = {0xca311f82, 0xf490, 0x4b12, {0x9e, 0xe1, 0x2b, 0x66, 0xa3, 0x6c, 0x3e, 0xa}}
+gVmdInitDonePpiGuid = {0x42a187c8, 0xca0a, 0x4750, {0x82, 0xfd, 0xc9, 0xa0, 0xd5, 0x9, 0xfe, 0xd1}}
+
+##
+## TwoLm
+##
+gMrcMemoryInitDonePpiGuid = { 0x598907f5, 0xd5fc, 0x435c, { 0x8a, 0x7f, 0x53, 0xc5, 0xa4, 0xb5, 0x31, 0xc4}}
+
+##
+## Nvdimm Cache Info
+##
+gNvdimmCachePpiGuid = { 0x1bbc5601, 0xe571, 0x4ae0, { 0xbc, 0x38, 0xb8, 0x65, 0x0d, 0x50, 0x6f, 0x5b}}
+
+##
+## Cpu
+##
+gPeiCachePpiGuid = {0x09be4bc2, 0x790e, 0x4dea, {0x8b, 0xdc, 0x38, 0x05, 0x16, 0x98, 0x39, 0x44}}
+gPeiTxtMemoryUnlockedPpiGuid = {0x38cdd10b, 0x767d, 0x4f6e, {0xa7, 0x44, 0x67, 0xee, 0x1d, 0xfe, 0x2f, 0xa5}}
+gPeiTxtReadyToRunMemoryInitPpiGuid = {0x9ecafd30, 0x29e2, 0x42f6, {0xba, 0xf3, 0x8b, 0x7d, 0xb8, 0xfe, 0x1f, 0x22}}
+gPeiReadyToInstallMpPpiGuid = { 0x1a266768, 0xfd43, 0x4e18, { 0xa8, 0x8a, 0x35, 0xc7, 0x94, 0xc3, 0x91, 0x0e }}
+##
+## Me
+##
+gHeciPpiGuid = {0xd14319e2, 0x407a, 0x9580, {0x8d, 0xe5, 0x51, 0xa8, 0xff, 0xc6, 0xd7, 0xd7}}
+gMbpSensitivePpiGuid = {0xed7c9ce9, 0x5912, 0x4807, {0xec, 0x90, 0x22, 0x18, 0xbc, 0x7b, 0xfc, 0x6c}}
+gHeci3IntegratedTouchControllerGuid = {0x3e8d0870, 0x271a, 0x4208, {0x8e, 0xb5, 0x9a, 0xcb, 0x94, 0x02, 0xae, 0x04}}
+gSiNvmOwnershipAcquiredPpiGuid = {0xe5db3d8c, 0xefa4, 0x4308, {0x9a, 0xab, 0x6b, 0x97, 0x81, 0x09, 0x98, 0xa0}}
+gHeciAccessPpiGuid = {0x3a5aab32, 0xd5a7, 0x4ce8, {0x88, 0xe2, 0xed, 0x8f, 0x7b, 0x43, 0x23, 0x9d}}
+gHeciTransportPpiGuid = {0x9fc932b9, 0x8851, 0x43f7, {0x8a, 0x58, 0xa8, 0xd9, 0x04, 0x01, 0xcd, 0x78}}
+gHeciControlPpiGuid = {0xd86381d8, 0xff7e, 0x462e, {0x9b, 0x55, 0x02, 0x0a, 0x64, 0x1b, 0xe3, 0x4f}}
+gMeBeforeDidSentPpiGuid = {0xd497b143, 0xf3ef, 0x4192, {0xa8, 0xc5, 0x5e, 0xf6, 0xcd, 0x6e, 0x4c, 0x87}}
+
+##
+## PCH
+##
+gWdtPpiGuid = {0xf38d1338, 0xaf7a, 0x4fb6, {0x91, 0xdb, 0x1a, 0x9c, 0x21, 0x83, 0x57, 0x0d}}
+gPchSpiPpiGuid = {0xdade7ce3, 0x6971, 0x4b75, {0x82, 0x5e, 0xe, 0xe0, 0xeb, 0x17, 0x72, 0x2d}}
+gPeiSmbusPolicyPpiGuid = {0x63b6e435, 0x32bc, 0x49c6, {0x81, 0xbd, 0xb7, 0xa1, 0xa0, 0xfe, 0x1a, 0x6c}}
+
+##
+## TCSS
+##
+gTcssPeiInitDonePpiGuid = {0x5ad291b8, 0xace4, 0x416a, {0xb7, 0x50, 0x7, 0x63, 0x59, 0xfc, 0xc1, 0x5b}}
+
+[LibraryClasses]
+## @libraryclass
+## Common
+##
+MmPciLib|Include/Library/MmPciLib.h
+
+## @libraryclass
+## SampleCode
+##
+## CPU
+##
+CpuPolicyLib|Cpu/Include/Library/CpuPolicyLib.h
+
+## @libraryclass
+## Me
+##
+
+MeChipsetLib|Me/Include/Library/MeChipsetLib.h
+
+PeiMePolicyLib|Me/Include/Library/PeiMePolicyLib.h
+PttHciLib|Me/Include/Library/PttHciLib.h
+PttHeciLib|Me/Include/Library/PttHeciLib.h
+## @libraryclass
+## Pch
+##
+GpioLib|Include/Library/GpioLib.h
+GpioLib|Include/Library/GpioNativeLib.h
+PchCycleDecodingLib|Pch/Include/Library/PchCycleDecodingLib.h
+EspiLib|Include/Library/PchEspiLib.h
+GbeLib|Include/Library/GbeLib.h
+GbeMdiLib|IpBlock/Gbe/IncludePrivate/Library/GbeMdiLib.h
+PchHsioLib|Pch/IncludePrivate/PchHsio.h
+PchInfoLib|Pch/Include/Library/PchInfoLib.h
+PchP2sbLib|Pch/Include/Library/PchP2sbLib.h
+PchPcieRpLib|Pch/Include/Library/PchPcieRpLib.h
+PchPcrLib|Pch/Include/Library/PchPcrLib.h
+PchPolicyLib|Pch/Include/Library/PchPolicyLib.h
+PchSbiAccessLib|Pch/IncludePrivate/Library/PchSbiAccessLib.h
+SerialIoAccessLib|Include/Library/SerialIoAccessLib.h
+DxePchPolicyLib|Pch/Include/Library/DxePchPolicyLib.h
+
+## @libraryclass
+## Sa
+##
+DxeSaPolicyLib|SystemAgent/Include/Library/DxeSaPolicyLib.h
+SaPlatformLib|SystemAgent/Include/Library/SaPlatformLib.h
+Include/Library/VoltageRegulatorCommands.h
+
+[PcdsFixedAtBuild]
+## From MdeModulePkg.dec
+## Progress Code for S3 Suspend start.
+## PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000
+gSiPkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
+## Progress Code for S3 Suspend end.
+## PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001
+gSiPkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
+##
+## PcdNemCodeCacheBase is usally the same as PEI FV Base address,
+## FLASH_BASE+FLASH_REGION_FV_RECOVERY_OFFSET from PlatformPkg.fdf.
+##
+## Restriction:
+## 1) PcdNemCodeCacheBase - (PcdTemporaryRamBase + PcdTemporaryRamSize) >= 4K
+## 2) PcdTemporaryRamBase >= 4G - 64M
+##
+gSiPkgTokenSpaceGuid.PcdNemCodeCacheBase|0xFFF80000|UINT32|0x20000009
+##
+## NemCodeCacheSize is usally the same as PEI FV Size,
+## FLASH_REGION_FV_RECOVERY_SIZE from PlatformPkg.fdf.
+##
+## Restriction:
+## 1) PcdNemTotalCacheSize = NemCodeCacheSize + PcdTemporaryRamSize
+## <= Maximun CPU NEM total size (Code + Data)
+## = LLC size - 0.5M
+## 2) PcdTemporaryRamSize <= Maximum CPU NEM data size
+## = MLC size
+## NOTE: The size restriction may be changed in next generation processor.
+## Please refer to Processor BWG for detail.
+##
+gSiPkgTokenSpaceGuid.PcdBiosAreaBaseAddress|0xFF800000|UINT32|0x10000001
+gSiPkgTokenSpaceGuid.PcdBiosSize|0x00800000|UINT32|0x10000002
+gSiPkgTokenSpaceGuid.PcdTemporaryRamBase|0xfef00000|UINT32|0x00010028
+gSiPkgTokenSpaceGuid.PcdTemporaryRamSize|0x2000|UINT32|0x00010029
+gSiPkgTokenSpaceGuid.PcdTopMemoryCacheSize|0x0|UINT32|0x0001002A
+gSiPkgTokenSpaceGuid.PcdFlashMicrocodeFvBase|0xFFE60000|UINT32|0x30000004
+gSiPkgTokenSpaceGuid.PcdFlashMicrocodeFvSize|0x000A0000|UINT32|0x30000005
+gSiPkgTokenSpaceGuid.PcdFlashMicrocodeOffset|0x00000060|UINT32|0x30000013
+gSiPkgTokenSpaceGuid.PcdFlashMicrocodeFvOffset|0x00660000|UINT32|0x30000006
+##
+## The CPU Trace Hub's BARs base and size
+##
+gSiPkgTokenSpaceGuid.PcdCpuTraceHubMtbBarBase|0xfad00000|UINT32|0x30000007
+gSiPkgTokenSpaceGuid.PcdCpuTraceHubMtbBarSize|0x100000|UINT32|0x30000008
+gSiPkgTokenSpaceGuid.PcdCpuTraceHubSwBarBase|0xfc000000|UINT32|0x30000009
+gSiPkgTokenSpaceGuid.PcdCpuTraceHubSwBarSize|0x800000|UINT32|0x3000000A
+gSiPkgTokenSpaceGuid.PcdCpuTraceHubRtitBarBase|0xfacfc000|UINT32|0x3000000B
+gSiPkgTokenSpaceGuid.PcdCpuTraceHubRtitBarSize|0x4000|UINT32|0x3000000C
+gSiPkgTokenSpaceGuid.PcdCpuTraceHubFwBarBase|0xfae00000|UINT32|0x3000000D
+gSiPkgTokenSpaceGuid.PcdCpuTraceHubFwBarSize|0x200000|UINT32|0x3000000E
+
+gSiPkgTokenSpaceGuid.PcdFspWrapperEnable |FALSE|BOOLEAN|0x3000000F
+gSiPkgTokenSpaceGuid.PcdFspBinaryEnable|FALSE|BOOLEAN|0x30000010
+gSiPkgTokenSpaceGuid.PcdEmbeddedEnable|0x0|UINT8|0x30000012
+
+##
+## PcdEfiGcdAllocateType is using for EFI_GCD_ALLOCATE_TYPE selection
+## value of the struct
+## 0x00 EfiGcdAllocateAnySearchBottomUp
+## 0x01 EfiGcdAllocateMaxAddressSearchBottomUp
+## 0x03 EfiGcdAllocateAnySearchTopDown
+## 0x04 EfiGcdAllocateMaxAddressSearchTopDown
+##
+## below value should not using in this situation
+## 0x05 EfiGcdMaxAllocateType : design for max value of struct
+## 0x02 EfiGcdAllocateAddress : design for speccification address allocate
+##
+gSiPkgTokenSpaceGuid.PcdEfiGcdAllocateType|0x01|UINT8|0x40000000
+
+##
+## Handshake register value driven to DMA controller PCIE venodr specific configuration register from FW
+## (LC/CM to host)
+##
+gSiPkgTokenSpaceGuid.PcdITbtToPcieRegister|0xEC|UINT8|0x40000003
+##
+## Handshake register value driven from DMA controller PCIE venodr specific configuration register to FW
+## (HOST to LC/CM)
+##
+gSiPkgTokenSpaceGuid.PcdPcieToITbtRegister|0xF0|UINT8|0x40000004
+
+gSiPkgTokenSpaceGuid.PcdAbove4GBMmioBase|0x0000004000000000|UINT64|0x40000005
+gSiPkgTokenSpaceGuid.PcdAbove4GBMmioSize|0x0000004000000000|UINT64|0x40000006
+
+gSiPkgTokenSpaceGuid.PcdSmmEntryPointBinFile|{ 0x52, 0xce, 0xc8, 0xe0, 0x51, 0x2b, 0xc2, 0x4c, 0xb3, 0xc7, 0xd2, 0x11, 0xa6, 0x25, 0xc1, 0xba }|VOID*|0x40000007
+gSiPkgTokenSpaceGuid.PcdSpsBinFile|{ 0xEE, 0xE3, 0x34, 0x71, 0xA6, 0x7F, 0x89, 0x44, 0x87, 0xA7, 0xAE, 0x38, 0x98, 0x4E, 0xAE, 0xD8 }|VOID*|0x40000008
+gSiPkgTokenSpaceGuid.PcdSpsSmmEntryPointBinFile|{ 0x5B, 0x63, 0x7D, 0x7C, 0x9C, 0x8B, 0x3C, 0x46, 0x9F, 0x7F, 0x91, 0xF6, 0x09, 0x06, 0x84, 0x8F }|VOID*|0x40000009
+gSiPkgTokenSpaceGuid.PcdSpaBinFile|{ 0xE1, 0x19, 0xB7, 0x7B, 0x2A, 0x53, 0x40, 0x7B, 0xA3, 0x4C, 0xC4, 0xF9, 0xE2, 0x6C, 0x27, 0x74 }|VOID*|0x4000000A
+gSiPkgTokenSpaceGuid.PcdSpaSmmEntryPointBinFile|{ 0xD7, 0xAD, 0xB2, 0x9F, 0x4D, 0x53, 0x4B, 0xA6, 0x8D, 0x55, 0x5D, 0x28, 0x91, 0x60, 0x10, 0x19 }|VOID*|0x4000000B
+
+##
+## - DpIn Silicon Feature
+##
+# Note: PcdDpInEnable is Default Disable. Override it based on Platform/ CPU
+gSiPkgTokenSpaceGuid.PcdDpInEnable|FALSE|BOOLEAN|0x4000000C
+# Note: For PcdMaxDpInExtPortSupported, we can have Maximum value of 0x08.
+# Please Don't exceed beyond that. As it will cause boundary overflow.
+# Currently hadrware wise maximum Dp-In External Port supported is 4.
+# And it will never exceed the value of 0x08. That's why we don't support
+# PcdMaxDpInExtPortSupported value more than 0x08
+gSiPkgTokenSpaceGuid.PcdMaxDpInExtPortSupported|0x4|UINT8|0x4000000D
+
+gSiPkgTokenSpaceGuid.VtdEngine1BaseAddeess|0xFED90000|UINT32|0x50000001
+gSiPkgTokenSpaceGuid.VtdEngine2BaseAddeess|0xFED92000|UINT32|0x50000002
+gSiPkgTokenSpaceGuid.VtdEngine3BaseAddeess|0xFED91000|UINT32|0x50000003
+gSiPkgTokenSpaceGuid.VtdEngine4BaseAddeess|0xFED84000|UINT32|0x50000004
+gSiPkgTokenSpaceGuid.VtdEngine5BaseAddeess|0xFED85000|UINT32|0x50000005
+gSiPkgTokenSpaceGuid.VtdEngine6BaseAddeess|0xFED86000|UINT32|0x50000006
+gSiPkgTokenSpaceGuid.VtdEngine7BaseAddeess|0xFED87000|UINT32|0x50000007
+##
+## Those PCDs are used to control build process.
+##
+gSiPkgTokenSpaceGuid.PcdTraceHubEnable |FALSE|BOOLEAN|0xF0000001
+gSiPkgTokenSpaceGuid.PcdSmmVariableEnable |FALSE|BOOLEAN|0xF0000002
+gSiPkgTokenSpaceGuid.PcdAtaEnable |FALSE|BOOLEAN|0xF0000004
+gSiPkgTokenSpaceGuid.PcdAcpiEnable |TRUE |BOOLEAN|0xF0000009
+gSiPkgTokenSpaceGuid.PcdSourceDebugEnable |FALSE|BOOLEAN|0xF000000B
+gSiPkgTokenSpaceGuid.PcdPpmEnable |TRUE |BOOLEAN|0xF000000C
+gSiPkgTokenSpaceGuid.PcdIntegratedTouchEnable |FALSE|BOOLEAN|0xF000000F
+gSiPkgTokenSpaceGuid.PcdPttEnable |FALSE|BOOLEAN|0xF0000011
+gSiPkgTokenSpaceGuid.PcdJhiEnable |FALSE|BOOLEAN|0xF0000012
+gSiPkgTokenSpaceGuid.PcdSoftwareGuardEnable |FALSE|BOOLEAN|0xF0000013
+gSiPkgTokenSpaceGuid.PcdSmbiosEnable |TRUE |BOOLEAN|0xF0000014
+gSiPkgTokenSpaceGuid.PcdS3Enable |TRUE |BOOLEAN|0xF0000015
+gSiPkgTokenSpaceGuid.PcdOverclockEnable |FALSE|BOOLEAN|0xF0000016
+gSiPkgTokenSpaceGuid.PcdCpuPowerOnConfigEnable |FALSE|BOOLEAN|0xF0000017
+gSiPkgTokenSpaceGuid.PcdSsaFlagEnable |FALSE|BOOLEAN|0xF0000018
+gSiPkgTokenSpaceGuid.PcdEvLoaderEnable |FALSE|BOOLEAN|0xF0000019
+gSiPkgTokenSpaceGuid.PcdIgdEnable |TRUE |BOOLEAN|0xF000001A
+gSiPkgTokenSpaceGuid.PcdPegEnable |TRUE |BOOLEAN|0xF000001B
+gSiPkgTokenSpaceGuid.PcdSaDmiEnable |TRUE |BOOLEAN|0xF000001C
+gSiPkgTokenSpaceGuid.PcdGnaEnable |FALSE |BOOLEAN|0xF000001E
+gSiPkgTokenSpaceGuid.PcdVtdEnable |TRUE |BOOLEAN|0xF0000020
+gSiPkgTokenSpaceGuid.PcdBiosGuardEnable |FALSE|BOOLEAN|0xF0000021
+gSiPkgTokenSpaceGuid.PcdSimicsEnable |FALSE|BOOLEAN|0xF0000022
+gSiPkgTokenSpaceGuid.PcdBdatEnable |FALSE|BOOLEAN|0xF0000023
+gSiPkgTokenSpaceGuid.PcdOptimizeCompilerEnable |TRUE |BOOLEAN|0xF0000024
+gSiPkgTokenSpaceGuid.PcdPeiDisplayEnable |TRUE |BOOLEAN|0xF0000025
+gSiPkgTokenSpaceGuid.PcdOcWdtEnable |FALSE|BOOLEAN|0xF0000029
+gSiPkgTokenSpaceGuid.PcdMinTreeEnable |FALSE|BOOLEAN|0xF000002A # To separate modules used in mininal source tree and advanced features
+gSiPkgTokenSpaceGuid.PcdBootGuardEnable |FALSE|BOOLEAN|0xF0000030
+gSiPkgTokenSpaceGuid.PcdSerialIoUartEnable |FALSE|BOOLEAN|0xF0000033
+gSiPkgTokenSpaceGuid.PcdSiCatalogDebugEnable |FALSE|BOOLEAN|0xF0000037
+gSiPkgTokenSpaceGuid.PcdBfxEnable |FALSE|BOOLEAN|0xF000003A
+gSiPkgTokenSpaceGuid.PcdThcEnable |FALSE|BOOLEAN|0xF000003B
+
+gSiPkgTokenSpaceGuid.PcdPpamEnable |FALSE|BOOLEAN|0xF000003F
+gSiPkgTokenSpaceGuid.PcdPsmiEnable |FALSE|BOOLEAN|0xF0000042
+gSiPkgTokenSpaceGuid.PcdCpuPcieEnable |TRUE |BOOLEAN|0xF0000043
+gSiPkgTokenSpaceGuid.PcdHybridStorageSupport |FALSE|BOOLEAN|0xF0000044
+gSiPkgTokenSpaceGuid.PcdMrcTraceMessageSupported |TRUE |BOOLEAN|0xF0000045
+gSiPkgTokenSpaceGuid.PcdTmeLibSupported |FALSE|BOOLEAN|0xF0000046
+gSiPkgTokenSpaceGuid.PcdAdlLpSupport |FALSE|BOOLEAN|0xF0000047
+gSiPkgTokenSpaceGuid.PcdSpsStateSaveEnable |FALSE|BOOLEAN|0xF0000048
+gSiPkgTokenSpaceGuid.PcdSpaEnable |FALSE|BOOLEAN|0xF0000049
+
+## PCD for TraceHub
+[PcdsDynamic, PcdsPatchableInModule]
+## From MdeModulePkg.dec
+## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
+gSiPkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
+## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
+gSiPkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
+## Default OEM Revision for ACPI table creation.
+gSiPkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
+## Default Creator ID for ACPI table creation.
+gSiPkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
+## Default Creator Revision for ACPI table creation.
+gSiPkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
+## ME HECI interface configuration
+gMeConfigSpaceGuid.PcdHeciDumpsEnabled|TRUE|BOOLEAN|0x50000001
+gMeConfigSpaceGuid.PcdHeciTimeoutsEnabled|TRUE|BOOLEAN|0x50000002
+
+
+[PcdsFixedAtBuild, PcdsPatchableInModule]
+## This value is used to set the base address of PCH devices
+gSiPkgTokenSpaceGuid.PcdSmbusBaseAddress|0x0000EFA0|UINT16|0x00010031
+gSiPkgTokenSpaceGuid.PcdTcoBaseAddress|0x0400|UINT16|0x00010033
+gSiPkgTokenSpaceGuid.PcdAcpiBaseAddress|0x1800|UINT16|0x00010035
+
+
+## Stack size in the temporary RAM.
+## 0 means half of TemporaryRamSize.
+gSiPkgTokenSpaceGuid.PcdPeiTemporaryRamStackSize|0|UINT32|0x00010036
+##
+## PcdFviSmbiosType determines the SMBIOS OEM type (0x80 to 0xFF) defined in SMBIOS,
+## values 0-0x7F will be treated as disable FVI reporting.
+## FVI structure uses it as SMBIOS OEM type to provide version information.
+##
+gSiPkgTokenSpaceGuid.PcdFviSmbiosType|0xDD|UINT8|0x00010037
+gSiPkgTokenSpaceGuid.PcdSaPciPrint|FALSE|BOOLEAN|0x00010039
+##
+## SMBIOS defaults
+##
+gSiPkgTokenSpaceGuid.PcdSmbiosDefaultSocketDesignation|"U3E1"|VOID*|0x0001003a
+gSiPkgTokenSpaceGuid.PcdSmbiosDefaultSerialNumber|"To Be Filled By O.E.M."|VOID*|0x0001003b
+gSiPkgTokenSpaceGuid.PcdSmbiosDefaultAssetTag|"To Be Filled By O.E.M."|VOID*|0x0001003c
+gSiPkgTokenSpaceGuid.PcdSmbiosDefaultPartNumber|"To Be Filled By O.E.M."|VOID*|0x0001003d
+
+##
+## Allocate 56 KB [0x2000..0xFFFF] of I/O space for Pci Devices
+## If PcdPciReservedMemLimit =0 Pci Reserved default MMIO Limit is 0xE0000000 else use PcdPciReservedMemLimit .
+##
+gSiPkgTokenSpaceGuid.PcdPciReservedIobase |0x2000 |UINT16|0x00010041
+gSiPkgTokenSpaceGuid.PcdPciReservedIoLimit |0xFFFF |UINT16|0x00010042
+gSiPkgTokenSpaceGuid.PcdPciReservedMemLimit |0x0000 |UINT32|0x00010043
+gSiPkgTokenSpaceGuid.PcdPciDmaAbove4G |FALSE |BOOLEAN|0x00010044
+gSiPkgTokenSpaceGuid.PcdPciNoExtendedConfigSpace|FALSE |BOOLEAN|0x00010045
+
+##
+## Default 8MB TSEG for Release build BIOS when IED disabled (Also a default)
+##
+gSiPkgTokenSpaceGuid.PcdTsegSize|0x00800000|UINT32|0x00010046
+##
+## gSiPkgTokenSpaceGuid.PcdFwStsSmbiosType determines the SMBIOS OEM type (0x80 to 0xFF) defined
+## in SMBIOS, values 0-0x7F will be treated as disable FWSTS SMBIOS reporting.
+## FWSTS structure uses it as SMBIOS OEM type to provide FWSTS information.
+##
+gSiPkgTokenSpaceGuid.PcdFwStsSmbiosType|0xDB|UINT8|0x00010047
+
+##
+## Maximum Address the AP Wakeup Buffer can start.
+##
+gSiPkgTokenSpaceGuid.PcdCpuApWakeupBufferMaxAddr|0x58000|UINT32|0x00010048
+
+##
+## Silicon Reference Code versions
+##
+##Revision:Weekly build number
+gSiPkgTokenSpaceGuid.PcdSiliconInitVersionRevision|0x33|UINT8|0x00010051
+
+##Build[7:4]:Daily build number.
+##Build[3:0]:Patch build number.
+
+##
+## Temp MEM IO resource
+##
+gSiPkgTokenSpaceGuid.PcdSiliconInitTempPciBusMin |2 |UINT8 |0x00010053
+gSiPkgTokenSpaceGuid.PcdSiliconInitTempPciBusMax |10 |UINT8 |0x00010054
+gSiPkgTokenSpaceGuid.PcdSiliconInitTempMemBaseAddr |0xFE600000|UINT32|0x00010055
+gSiPkgTokenSpaceGuid.PcdSiliconInitTempMemSize |0x00200000|UINT32|0x00010056
+
+##
+## This PCD specifies the base address of the HPET timer.
+## The acceptable values are 0xFED00000, 0xFED01000, 0xFED02000, and 0xFED03000
+##
+gSiPkgTokenSpaceGuid.PcdSiHpetBaseAddress |0xFED00000|UINT32|0x00010057
+##
+## This PCD specifies the base address of the IO APIC.
+## The acceptable values are 0xFECxx000.
+##
+gSiPkgTokenSpaceGuid.PcdSiIoApicBaseAddress |0xFEC00000|UINT32|0x00010058
+
+
+##
+## VTD Base Addresses
+##
+
+## Null-terminated string of the Version of Physical Presence interface supported by platform.
+# @Prompt Version of Physical Presence interface supported by platform.
+gSiPkgTokenSpaceGuid.PcdTcgPhysicalPresenceInterfaceVer|"1.3"|VOID*|0x00000008
+
+## This PCD specifies Master of TraceHub device
+gSiPkgTokenSpaceGuid.PcdTraceHubDebugLibMaster|0x0|UINT32|0x00011000
+## This PCD specifies Channel of TraceHub device
+gSiPkgTokenSpaceGuid.PcdTraceHubDebugLibChannel|0x0|UINT32|0x00011001
+
+
+[PcdsPatchableInModule, PcdsFixedAtBuild]
+## This value is used to set the base address of MCH
+gSiPkgTokenSpaceGuid.PcdMchBaseAddress|0xFEDC0000|UINT64|0x00010030
+## 128KB window
+gSiPkgTokenSpaceGuid.PcdMchMmioSize|0x20000|UINT32|0x50000000
+gSiPkgTokenSpaceGuid.PcdSiliconInitVersionMajor |0x0A|UINT8|0x00010049
+gSiPkgTokenSpaceGuid.PcdSiliconInitVersionValue |0x0000000800260020|UINT64|0x00010077
+
+##Minor:the program that supported by same core generation.
+gSiPkgTokenSpaceGuid.PcdSiliconInitVersionMinor |0x00|UINT8|0x00010050
+
+gSiPkgTokenSpaceGuid.PcdSiliconInitVersionBuild |0x10|UINT8|0x00010052
+gSiPkgTokenSpaceGuid.PcdRegBarBaseAddress|0xFB000000|UINT32|0x00010059
+[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
+##
+## SerialIo Uart Configuration
+##
+gSiPkgTokenSpaceGuid.PcdSerialIoUartDebugEnable |0 |UINT8 |0x00210001 # 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing
+gSiPkgTokenSpaceGuid.PcdSerialIoUartNumber |2 |UINT8 |0x00210002
+gSiPkgTokenSpaceGuid.PcdSerialIoUartMode |2 |UINT8 |0x00210003 # 0:Disabled, 1:Enabled, 2:Hidden, 3:COM, 4:SkipInit
+gSiPkgTokenSpaceGuid.PcdSerialIoUartBaudRate |115200 |UINT32|0x00210004 # 0:Default, Max:6000000
+gSiPkgTokenSpaceGuid.PcdSerialIoUartParity |1 |UINT8 |0x00210008 # 0:DefaultParity, 1:NoParity, 2:EvenParity, 3:OddParity
+gSiPkgTokenSpaceGuid.PcdSerialIoUartDataBits |8 |UINT8 |0x00210009 # 0:Default, 5,6,7,8
+gSiPkgTokenSpaceGuid.PcdSerialIoUartStopBits |1 |UINT8 |0x0021000A # 0:DefaultStopBits, 1:OneStopBit, 2:OneFiveStopBits, 3:TwoStopBits
+gSiPkgTokenSpaceGuid.PcdSerialIoUartAutoFlow |0 |UINT8 |0x0021000B # 0:No HW flow control, Only RX/TX Enabled; 1:HW Flow Control On, Rts/Cts lines enabled;
+gSiPkgTokenSpaceGuid.PcdSerialIoUartRxPinMux |0x0 |UINT32|0x0021000C # Pin muxing config for UART Rx pin
+gSiPkgTokenSpaceGuid.PcdSerialIoUartTxPinMux |0x0 |UINT32|0x00210010 # Pin muxing config for UART Tx pin
+gSiPkgTokenSpaceGuid.PcdSerialIoUartRtsPinMux |0x0 |UINT32|0x00210014 # Pin muxing config for UART Rts pin
+gSiPkgTokenSpaceGuid.PcdSerialIoUartCtsPinMux |0x0 |UINT32|0x00210018 # Pin muxing config for UART Cts pin
+gSiPkgTokenSpaceGuid.PcdSerialIoUartDebugMmioBase |0xFE036000 |UINT32|0x0021001C # PcdSerialIoUartMode = Enabled, need to assign MMIO Resource in SEC/PEI Phase
+
+gSiPkgTokenSpaceGuid.PcdLpcUartDebugEnable |0x1 |UINT8 |0x00210026 # 0:Disable, 1:Enable
+gSiPkgTokenSpaceGuid.PcdDebugInterfaceFlags |0x12 |UINT8 |0x00210027 # BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, BIT2 - Not used.
+gSiPkgTokenSpaceGuid.PcdSerialDebugLevel |0x3 |UINT8 |0x00210028 # {0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load Error Warnings and Info, 5:Load Error Warnings Info and Verbose
+gSiPkgTokenSpaceGuid.PcdIsaSerialUartBase |0x0 |UINT8 |0x00210029 # 0:0x3F8, 1:0x2F8
+
+## UART Lib TimeOut
+gSiPkgTokenSpaceGuid.PcdSerialIoUartTimeOut |1000000 |UINT32 |0x00210020 # Write TimeOut in Micro Seconds - 0 = disabbled, default 1 second,
+gSiPkgTokenSpaceGuid.PcdSerialIoUartLibSkipMmioCheck |FALSE |BOOLEAN|0x00210024 # If TRUE MMIO sanity checks are skipped
+
+## UART Dxe Driver IgnoreBaudRateSet
+## TRUE - Blocks changing BaudRate, so that driver will not override UART's initial configuration.
+## Required to support redirection on higher BaudRates.
+## FALSE - Allows for UART settings to be changed through the Serial Io Protocol
+##
+gSiPkgTokenSpaceGuid.PcdSerialIoUartDriverIgnoreBaudRateSet|FALSE|BOOLEAN|0x00210025
+
+##
+## SerialIo 2nd Uart Configuration
+##
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartEnable |0 |UINT8 |0x0021002A # 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartNumber |2 |UINT8 |0x0021002B
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartMode |2 |UINT8 |0x0021002C # 0:Disabled, 1:Enabled, 2:Hidden, 3:COM, 4:SkipInit
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartBaudRate |115200 |UINT32|0x0021002D # 0:Default, Max:6000000
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartParity |1 |UINT8 |0x00210031 # 0:DefaultParity, 1:NoParity, 2:EvenParity, 3:OddParity
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartDataBits |8 |UINT8 |0x00210032 # 0:Default, 5,6,7,8
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartStopBits |1 |UINT8 |0x00210033 # 0:DefaultStopBits, 1:OneStopBit, 2:OneFiveStopBits, 3:TwoStopBits
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartAutoFlow |0 |UINT8 |0x00210034 # 0:No HW flow control, Only RX/TX Enabled; 1:HW Flow Control On, Rts/Cts lines enabled;
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartRxPinMux |0x0 |UINT32|0x00210035 # Pin muxing config for UART Rx pin
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartTxPinMux |0x0 |UINT32|0x00210039 # Pin muxing config for UART Tx pin
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartRtsPinMux |0x0 |UINT32|0x0021003D # Pin muxing config for UART Rts pin
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartCtsPinMux |0x0 |UINT32|0x00210041 # Pin muxing config for UART Cts pin
+gSiPkgTokenSpaceGuid.PcdSerialIo2ndUartMmioBase |0xFE034000 |UINT32|0x00210045 # PcdSerialIoUartMode = Enabled, need to assign MMIO Resource in SEC/PEI Phase
+
+##
+## PCI Express MMIO region length
+## Valid settings: 0x20000000/512MB, 0x10000000/256MB, 0x8000000/128MB, 0x4000000/64MB
+##
+gSiPkgTokenSpaceGuid.PcdPciExpressRegionLength|0x10000000|UINT32|0x00200001
+##
+## Typically this should be the same with gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress.
+## This PCD is added for supporting different PCD type in different phases.
+##
+gSiPkgTokenSpaceGuid.PcdSiPciExpressBaseAddress |0xC0000000|UINT64|0x00200002
+##
+## PCI Express MMIO temporary region length in SEC phase.
+## Valid settings: 0x20000000/512MB, 0x10000000/256MB, 0x8000000/128MB, 0x4000000/64MB
+##
+gSiPkgTokenSpaceGuid.PcdTemporaryPciExpressRegionLength|0x10000000|UINT32|0x00200005
+
+## Specifies the SMRR2 base address.<BR><BR>
+# @Prompt SMRR2 base address.
+# @Expression 0x80000001 | (gSiPkgTokenSpaceGuid.PcdCpuSmmSmrr2Base & 0xfff) == 0
+gSiPkgTokenSpaceGuid.PcdCpuSmmSmrr2Base|0|UINT32|0x20000002
+
+## Specifies the SMRR2 range size.<BR><BR>
+# @Prompt SMRR2 range size.
+# @Expression 0x80000001 | (gSiPkgTokenSpaceGuid.PcdCpuSmmSmrr2Size & 0xfff) == 0
+gSiPkgTokenSpaceGuid.PcdCpuSmmSmrr2Size|0|UINT32|0x20000003
+
+## Specifies the SMRR2 range cache type.
+# If SMRR2 is used to map a flash/ROM based handler, it would be configured as WP.<BR><BR>
+# 5: WP(Write Protect).<BR>
+# 6: WB(Write Back).<BR>
+# @Prompt SMRR2 range cache type.
+gSiPkgTokenSpaceGuid.PcdCpuSmmSmrr2CacheType|5|UINT8|0x20000004
+
+## Indidates if SMM PROT MODE feature is supported.<BR><BR>
+# TRUE - SMM PROT MODE feature is supported.<BR>
+# FALSE - SMM PROT MODE feature is not supported.<BR>
+# @Prompt SMM PROT MODE feature.
+gSiPkgTokenSpaceGuid.PcdCpuSmmProtectedModeEnable|FALSE|BOOLEAN|0x20000008
+
+## Specifies the a size of memory region to reserve in SMM for testing only.
+# One can look in BIOS serial log for PCD to get region base address.
+# Note: A different region may be allocated in release build than debug build.
+# @Prompt SMM test region size.\r
+gSiPkgTokenSpaceGuid.PcdSmmTestRsvMemorySize|0x0|UINT32|0x2000000E
+
+[PcdsDynamic]
+
+## Indidates if SMM Code Access Check feature is supported.<BR><BR>
+# TRUE - SMM Code Access Check feature is supported.<BR>
+# FALSE - SMM Code Access Check feature is not supported.<BR>
+# @Prompt SMM Code Access Check feature.
+gSiPkgTokenSpaceGuid.PcdCpuSmmCodeAccessCheckEnable|TRUE|BOOLEAN|0x001000D
+
+## Causes all UEFI variables to be treated as volatile and hence never written to non-volatile
+## storage.
+## This is useful in cases such as a simulation environment that does not emulate a non-volatile
+## storage device or in recovery scenarios where system errors prevent non-volatile storage from being accessed
+gSiPkgTokenSpaceGuid.PcdNvVariableEmulationMode|FALSE|BOOLEAN|0x0010000E
+
+## Enables or disables storage of UEFI variables using the CSE Variable Storage drivers
+## If disabled at runtime, it must be set before the CSE Variable Storage driver loads.
+gSiPkgTokenSpaceGuid.PcdEnableCseVariableStorage|FALSE|BOOLEAN|0x0010000F
+
+## Enables or disables storage of UEFI variables using the FVB Variable Storage drivers
+## If disabled at runtime, it must be set before the FVB Variable Storage driver loads.
+gSiPkgTokenSpaceGuid.PcdEnableFvbVariableStorage|TRUE|BOOLEAN|0x00100010
+
--
2.24.0.windows.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-02-05 1:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-02-05 0:38 [Patch V2 40/40] Maintainers.txt: Add TigerlakeSiliconPkg maintainers Heng Luo
2021-02-05 1:08 ` Chaganty, Rangasai V
-- strict thread matches above, loose matches on Subject: below --
2021-02-04 8:48 [Patch V2 01/40] TigerlakeSiliconPkg: Add package and Include/ConfigBlock headers Heng Luo
[not found] ` <20210204084919.3603-40-heng.luo@intel.com>
2021-02-04 20:09 ` [Patch V2 40/40] Maintainers.txt: Add TigerlakeSiliconPkg maintainers Nate DeSimone
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox