[Patch V3 16/40] TigerlakeSiliconPkg/IpBlock: Add Gbe component

["Heng Luo" <heng.luo@intel.com>]

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3171

Adds the following files:
  * IpBlock/Gbe/IncludePrivate
  * IpBlock/Gbe/Library
  * IpBlock/Gbe/LibraryPrivate

Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
---
 Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/IncludePrivate/Library/GbeMdiLib.h                       | 324 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/IncludePrivate/Register/GbeRegs.h                        |  68 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/Library/PeiDxeSmmGbeLib/GbeLib.c                         | 121 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/Library/PeiDxeSmmGbeLib/PeiDxeSmmGbeLib.inf              |  43 +++++++++++++++++++++++++++++++++++++++++++
 Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/LibraryPrivate/PeiDxeSmmGbeMdiLib/GbeMdiLib.c            | 388 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/LibraryPrivate/PeiDxeSmmGbeMdiLib/PeiDxeSmmGbeMdiLib.inf |  34 ++++++++++++++++++++++++++++++++++
 6 files changed, 978 insertions(+)

diff --git a/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/IncludePrivate/Library/GbeMdiLib.h b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/IncludePrivate/Library/GbeMdiLib.h
new file mode 100644
index 0000000000..b8274ed3dc
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/IncludePrivate/Library/GbeMdiLib.h
@@ -0,0 +1,324 @@
+/** @file
+  Header file for GbeMdiLib.
+
+  Conventions:
+
+  - Prefixes:
+    Definitions beginning with "R_" are registers
+    Definitions beginning with "B_" are bits within registers
+    Definitions beginning with "V_" are meaningful values within the bits
+    Definitions beginning with "S_" are register sizes
+    Definitions beginning with "N_" are the bit position
+  - In general, PCH registers are denoted by "_PCH_" in register names
+  - Registers / bits that are different between PCH generations are denoted by
+    "_PCH_[generation_name]_" in register/bit names.
+  - Registers / bits that are specific to PCH-H denoted by "_H_" in register/bit names.
+    Registers / bits that are specific to PCH-LP denoted by "_LP_" in register/bit names.
+    e.g., "_PCH_LP_"
+    Registers / bits names without or _LP_ apply for LP.
+  - Registers / bits that are different between SKUs are denoted by "_[SKU_name]"
+    at the end of the register/bit names
+  - Registers / bits of new devices introduced in a PCH generation will be just named
+    as "_PCH_" without [generation_name] inserted.
+
+  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _GBE_MDI_LIB_H_
+#define _GBE_MDI_LIB_H_
+
+//
+// Maximum loop time for GbE status check
+// 4000 * 50 = 200 mSec in total
+//
+#define GBE_MAX_LOOP_TIME       4000
+#define GBE_ACQUIRE_MDIO_DELAY  50
+#define GBE_MDI_SET_PAGE_DELAY  4000 // 4 mSec delay after setting page
+
+//
+// LAN PHY MDI settings
+//
+// MDI Control Register Bits
+// 31:30 Reserved
+//       This field is reserved and returns 0.
+// 29    Interrupt Enable.
+//       When this bit is set to 1 by software, it causes the device to assert
+//       an interrupt indicating the end of an MDI cycle.
+// 28    Ready.
+//       Set to 1 by the device at the end of MDI transaction (i.e., indicates a Read or
+//       Write has been completed. It should be reset to 0 by software at the same time the
+//       command is written.
+// 27:26 Opcode
+//       For an MDI write, the opcode equals 01b, and for MDI read, 10b. 00b and
+//       11b are reserved and should not be used.
+// 25:21 PHYAdd
+//       PHY Address
+// 20:16 RegAdd
+//       PHY Register Address
+// 15:0  Data
+
+#define B_PHY_MDI_READY                BIT28
+#define B_PHY_MDI_READ                 BIT27
+#define B_PHY_MDI_WRITE                BIT26
+//
+//      PHY SPECIFIC registers
+//
+#define B_PHY_MDI_PHY_ADDRESS_02       BIT22
+//
+//      PHY GENERAL registers
+//      Registers 0 to 15 are defined by the specification
+//      Registers 16 to 31 are left available to the vendor
+//
+#define B_PHY_MDI_PHY_ADDRESS_01       BIT21
+#define B_PHY_MDI_PHY_ADDRESS_MASK    (BIT25 | BIT24 | BIT23 | BIT22 | BIT21)
+//
+//  PHY Identifier Register 2
+//  Bits [15:10] - PHY ID Number   - The PHY identifier composed of bits 3 through 18
+//                                   of the Organizationally Unique Identifier (OUI)
+//  Bits [9:4]   - Device Model Number
+//  Bits [3:0]   - Device Revision Number
+//
+#define R_PHY_MDI_GENEREAL_REGISTER_03_PHY_IDENTIFIER_2  0x00030000
+
+#define MDI_REG_SHIFT(x)                              (x << 16)
+#define B_PHY_MDI_PHY_REGISTER_MASK                   (BIT20 | BIT19 | BIT18 | BIT17 | BIT16)
+#define R_PHY_MDI_PHY_REG_SET_ADDRESS                 0x00110000 // Used after new page setting
+#define R_PHY_MDI_PHY_REG_DATA_READ_WRITE             0x00120000
+#define R_PHY_MDI_PHY_REG_SET_PAGE                    0x001F0000
+
+//
+// LAN PHY MDI registers and bits
+//
+
+//
+// Page 769 Port Control Registers
+// 6020h (769 * 32)
+//
+#define PHY_MDI_PAGE_769_PORT_CONTROL_REGISTERS        769
+//
+// Custom Mode Control PHY Address 01, Page 769, Register 16
+//
+#define R_PHY_MDI_PAGE_769_REGISETER_16_CMC            0x0010
+//
+// Custom Mode Control
+// Page 769, Register 16, BIT 10
+// 0 - normal MDIO frequency access
+// 1 - reduced MDIO frequency access (slow mdio)
+//     required for read during cable disconnect
+//
+#define B_PHY_MDI_PAGE_769_REGISETER_16_CMC_MDIO_FREQ_ACCESS        BIT10
+//
+//  Port General Configuration PHY Address 01, Page 769, Register 17
+//
+#define R_PHY_MDI_PAGE_769_REGISETER_17_PGC            0x0011
+//
+// Page 769, Register 17, BIT 4
+// Enables host wake up
+//
+#define B_PHY_MDI_PAGE_769_REGISETER_17_PGC_HOST_WAKE_UP            BIT4
+//
+// Page 769, Register 17, BIT 2
+// Globally enable the MAC power down feature while the
+// GbE supports WoL. When set to 1b,
+// pages 800 and 801 are enabled for
+// configuration and Host_WU_Active is not blocked for writes.
+//
+#define B_PHY_MDI_PAGE_769_REGISETER_17_PGC_MACPD_ENABLE            BIT2
+
+//
+// Page 800 Wake Up Registers
+// 6400h (800 * 32)
+//
+#define PHY_MDI_PAGE_800_WAKE_UP_REGISTERS             800
+//
+// Wake Up Control - WUC PHY Address 01, Page 800, Register 1
+// 1h (Register 1)
+//
+#define R_PHY_MDI_PAGE_800_REGISETER_1_WUC             0x0001
+//
+// Wake Up Control - (WUC)
+// Page 800, Register 1, BIT 0
+// Advance Power Management Enable (APME)
+// If set to 1b, APM wake up is enabled.
+//
+#define B_PHY_MDI_PAGE_800_REGISETER_1_WUC_APME                     BIT0
+//
+// Receive Address Low - RAL PHY Address 01, Page 800, Register 16
+// 10h (Register 16)
+//
+#define R_PHY_MDI_PAGE_800_REGISETER_16_RAL0           0x0010
+//
+// Receive Address Low - RAL PHY Address 01, Page 800, Register 17
+// 11h (Register 17)
+//
+#define R_PHY_MDI_PAGE_800_REGISETER_17_RAL1           0x0011
+//
+// Receive Address High - RAH PHY Address 01, Page 800, Register 18
+// 12h (Register 18)
+//
+#define R_PHY_MDI_PAGE_800_REGISETER_18_RAH0           0x0012
+//
+// Receive Address High - RAH PHY Address 01, Page 800, Register 19
+// 13h (Register 19)
+//
+#define R_PHY_MDI_PAGE_800_REGISETER_19_RAH1           0x0013
+//
+// Setting AV (BIT15 RAH is divided on two registers)
+// RAH Register 19, Page 800, BIT 31
+//
+// Address valid (AV)
+// When this bit is set, the relevant RAL and RAH are valid
+//
+#define B_PHY_MDI_PAGE_800_REGISETER_19_RAH1_ADDRESS_VALID          BIT15
+//
+// Page 803 Host WoL Packet
+// 6460h (803 * 32)
+//
+#define PHY_MDI_PAGE_803_HOST_WOL_PACKET               803
+//
+// Host WoL Packet Clear - HWPC PHY Address 01, Page 803, Register 66
+//
+#define R_PHY_MDI_PAGE_803_REGISETER_66_HWPC           0x0042
+
+
+/**
+  Change Extended Device Control Register BIT 11 to 1 which
+  forces the interface between the MAC and the Phy to be on SMBus.
+  Cleared on the assertion of PCI reset.
+
+  @param [in]  GbeBar   GbE MMIO space
+
+**/
+VOID
+GbeMdiForceMACtoSMB (
+  IN      UINT32  GbeBar
+  );
+
+/**
+  Test for MDIO operation complete.
+
+  @param [in]  GbeBar   GbE MMIO space
+
+  @retval EFI_SUCCESS
+  @retval EFI_TIMEOUT
+**/
+EFI_STATUS
+GbeMdiWaitReady (
+  IN      UINT32  GbeBar
+  );
+
+/**
+  Acquire MDIO software semaphore.
+
+  1. Ensure that MBARA offset F00h [5] = 1b
+  2. Poll MBARA offset F00h [5] up to 200ms
+
+  @param [in] GbeBar   GbE MMIO space
+
+  @retval EFI_SUCCESS
+  @retval EFI_TIMEOUT
+**/
+EFI_STATUS
+GbeMdiAcquireMdio (
+  IN      UINT32  GbeBar
+  );
+
+/**
+  Release MDIO software semaphore by clearing MBARA offset F00h [5]
+
+  @param [in]  GbeBar   GbE MMIO space
+**/
+VOID
+GbeMdiReleaseMdio (
+  IN      UINT32  GbeBar
+  );
+
+/**
+  Sets page on MDI
+  Page setting is attempted twice.
+  If first attempt failes MAC and the Phy are force to be on SMBus
+
+  @param [in]  GbeBar  GbE MMIO space
+  @param [in]  Data    Value to write in lower 16bits.
+
+  @retval EFI_SUCCESS       Page setting was successfull
+  @retval EFI_DEVICE_ERROR  Returned if both attermps of setting page failed
+**/
+EFI_STATUS
+GbeMdiSetPage (
+  IN      UINT32  GbeBar,
+  IN      UINT32  Page
+  );
+
+/**
+  Sets Register in current page.
+
+  @param [in]  GbeBar      GbE MMIO space
+  @param [in]  register    Register number
+
+  @return EFI_STATUS
+**/
+EFI_STATUS
+GbeMdiSetRegister (
+  IN      UINT32  GbeBar,
+  IN      UINT32  Register
+  );
+
+
+/**
+  Perform MDI read.
+
+  @param [in]  GbeBar       GbE MMIO space
+  @param [in]  PhyAddress   Phy Address General - 02 or Specific - 01
+  @param [in]  PhyRegister  Phy Register
+  @param [out] ReadData     Return Value
+
+  @retval EFI_SUCCESS            Based on response from GbeMdiWaitReady
+  @retval EFI_TIMEOUT            Based on response from GbeMdiWaitReady
+  @retval EFI_INVALID_PARAMETER  If Phy Address or Register validaton failed
+**/
+EFI_STATUS
+GbeMdiRead (
+  IN      UINT32  GbeBar,
+  IN      UINT32  PhyAddress,
+  IN      UINT32  PhyRegister,
+  OUT     UINT16  *ReadData
+  );
+
+/**
+  Perform MDI write.
+
+  @param [in]  GbeBar       GbE MMIO space
+  @param [in]  PhyAddress   Phy Address General - 02 or Specific - 01
+  @param [in]  PhyRegister  Phy Register
+  @param [in]  WriteData    Value to write in lower 16bits.
+
+  @retval EFI_SUCCESS            Based on response from GbeMdiWaitReady
+  @retval EFI_TIMEOUT            Based on response from GbeMdiWaitReady
+  @retval EFI_INVALID_PARAMETER  If Phy Address or Register validaton failed
+**/
+EFI_STATUS
+GbeMdiWrite (
+  IN      UINT32  GbeBar,
+  IN      UINT32  PhyAddress,
+  IN      UINT32  PhyRegister,
+  IN      UINT32  WriteData
+  );
+
+/**
+  Gets Phy Revision and Model Number
+  from PHY IDENTIFIER register 2 (offset 3)
+
+  @param [in]  GbeBar           GbE MMIO space
+  @param [out] LanPhyRevision   Return Value
+
+  @return EFI_STATUS
+  @return EFI_INVALID_PARAMETER When GbeBar is incorrect
+**/
+EFI_STATUS
+GbeMdiGetLanPhyRevision (
+  IN      UINT32  GbeBar,
+  OUT     UINT16  *LanPhyRevision
+  );
+
+#endif // _GBE_MDI_LIB_H_
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/IncludePrivate/Register/GbeRegs.h b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/IncludePrivate/Register/GbeRegs.h
new file mode 100644
index 0000000000..307f1e159e
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/IncludePrivate/Register/GbeRegs.h
@@ -0,0 +1,68 @@
+/** @file
+  Register names for GbE device
+
+  Conventions:
+
+  - Register definition format:
+    Prefix_[GenerationName]_[ComponentName]_SubsystemName_RegisterSpace_RegisterName
+  - Prefix:
+    Definitions beginning with "R_" are registers
+    Definitions beginning with "B_" are bits within registers
+    Definitions beginning with "V_" are meaningful values within the bits
+    Definitions beginning with "S_" are register size
+    Definitions beginning with "N_" are the bit position
+  - [GenerationName]:
+    Three letter acronym of the generation is used (e.g. SKL,KBL,CNL etc.).
+    Register name without GenerationName applies to all generations.
+  - [ComponentName]:
+    This field indicates the component name that the register belongs to (e.g. PCH, SA etc.)
+    Register name without ComponentName applies to all components.
+    Register that is specific to -LP denoted by "_PCH_LP_" in component name.
+  - SubsystemName:
+    This field indicates the subsystem name of the component that the register belongs to
+    (e.g. PCIE, USB, SATA, GPIO, PMC etc.).
+  - RegisterSpace:
+    MEM - MMIO space register of subsystem.
+    IO  - IO space register of subsystem.
+    PCR - Private configuration register of subsystem.
+    CFG - PCI configuration space register of subsystem.
+  - RegisterName:
+    Full register name.
+
+  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _GBE_REGS_H_
+#define _GBE_REGS_H_
+
+#define R_GBE_CFG_MBARA               0x10
+#define N_GBE_CFG_MBARA_ALIGN         17
+#define R_GBE_CFG_PMCS                0xCC
+#define B_GBE_CFG_PMCS_PS             (BIT1 | BIT0)
+#define V_GBE_CFG_PMCS_PS0            0x00
+//
+// Gigabit Ethernet LAN Capabilities and Status Registers (Memory space)
+//
+#define R_GBE_MEM_CSR_CTRL                    0
+//
+// LANPHYPC:
+// Connects to the LCD DEVICE_OFF# signal in the
+// LAN Connected Device
+//
+#define B_GBE_MEM_CSR_CTRL_LANPHYPC_OVERRIDE  BIT16 // When set to 1 SW driver has the ability to control the LANPHYPC pin value.
+#define B_GBE_MEM_CSR_CTRL_LANPHYPC_VAL       BIT17 // When set to 1 this bit will define the value of the LANPHYPC pin.
+#define R_GBE_MEM_CSR_CTRL_EXT             0x0018
+#define B_GBE_MEM_CSR_CTRL_EXT_LPCD        BIT2  //LCD Power Cycle Done (LPCD). This bit indicates whether LCD power cycle is done
+                                                 //- the bit is set 50/100mSec after LANPHYPC pin assertion.
+#define B_GBE_MEM_CSR_CTRL_EXT_FORCE_SMB   BIT11
+#define R_GBE_MEM_CSR_MDIC                 0x0020
+#define B_GBE_MEM_CSR_MDIC_RB              BIT28
+#define R_GBE_MEM_CSR_EXTCNF_CTRL          0x0F00
+#define B_GBE_MEM_CSR_EXTCNF_CTRL_SWFLAG   BIT5
+#define R_GBE_MEM_CSR_RAL                  0x5400
+#define R_GBE_MEM_CSR_RAH                  0x5404
+#define B_GBE_MEM_CSR_RAH_RAH              0x0000FFFF
+#define R_GBE_MEM_CSR_WUC                  0x5800
+#define B_GBE_MEM_CSR_WUC_APME             BIT0
+
+#endif
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/Library/PeiDxeSmmGbeLib/GbeLib.c b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/Library/PeiDxeSmmGbeLib/GbeLib.c
new file mode 100644
index 0000000000..3b51b9eb62
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/Library/PeiDxeSmmGbeLib/GbeLib.c
@@ -0,0 +1,121 @@
+/** @file
+  Gbe Library.
+  All function in this library is available for PEI, DXE, and SMM,
+  But do not support UEFI RUNTIME environment call.
+
+  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Base.h>
+#include <Uefi/UefiBaseType.h>
+#include <Library/IoLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseLib.h>
+#include <Library/PciSegmentLib.h>
+#include <Library/PchInfoLib.h>
+#include <Library/PchPcrLib.h>
+#include <Library/PchCycleDecodingLib.h>
+#include <Library/PmcPrivateLib.h>
+#include <Library/SpiAccessLib.h>
+#include <Library/GbeMdiLib.h>
+#include <IndustryStandard/Pci30.h>
+#include <Register/PchRegs.h>
+#include <Register/GbeRegs.h>
+#include <Library/PchPciBdfLib.h>
+
+/**
+  Check whether GbE region is valid
+  Check SPI region directly since GbE might be disabled in SW.
+
+  @retval TRUE                    Gbe Region is valid
+  @retval FALSE                   Gbe Region is invalid
+**/
+BOOLEAN
+IsGbeRegionValid (
+  VOID
+  )
+{
+  return SpiIsGbeRegionValid ();
+}
+
+/**
+  Check whether GBE controller is enabled in the platform.
+
+  @retval TRUE                    GbE is enabled
+  @retval FALSE                   GbE is disabled
+**/
+BOOLEAN
+IsGbePresent (
+  VOID
+  )
+{
+  //
+  // Check PCH Support
+  //
+  if (!PchIsGbeSupported ()) {
+    return FALSE;
+  }
+  //
+  // Check PMC strap/fuse
+  //
+  if (!PmcIsGbeSupported ()) {
+    return FALSE;
+  }
+  //
+  // Check GbE NVM
+  //
+  if (IsGbeRegionValid () == FALSE) {
+    return FALSE;
+  }
+  return TRUE;
+}
+
+/**
+  Verifies Gigabit Ethernet PCI Class Code
+
+  @param [in]  GbePciCfgBase      GbE PCI Config Space Address
+
+  @retval TRUE                    GbE Class Code match
+  @retval FALSE                   GbE Class Code does not match
+**/
+BOOLEAN
+STATIC
+GbeCheckClassCode (
+  UINT64 GbePciCfgBase
+  )
+{
+  UINT8 BaseCode;
+  UINT8 SubClassCode;
+
+  SubClassCode  = PciSegmentRead8 (GbePciCfgBase + PCI_CLASSCODE_OFFSET + 1);
+  BaseCode      = PciSegmentRead8 (GbePciCfgBase + PCI_CLASSCODE_OFFSET + 2);
+
+  if ((BaseCode != PCI_CLASS_NETWORK) || (SubClassCode != PCI_CLASS_NETWORK_ETHERNET)) {
+    DEBUG ((DEBUG_ERROR, "GbeCheckClassCode : BaseCode(0x%x) or ClassCode(0x%x) is not supported\n", BaseCode, SubClassCode));
+    ASSERT (FALSE);
+    return FALSE;
+  }
+  return TRUE;
+}
+
+/**
+  Checks if Gbe is Enabled or Disabled
+
+  @retval  BOOLEAN    TRUE if device is enabled, FALSE otherwise.
+**/
+BOOLEAN
+IsGbeEnabled (
+  VOID
+  )
+{
+  UINT64  GbePciBase;
+
+  GbePciBase = GbePciCfgBase ();
+
+  if (PciSegmentRead32 (GbePciBase) != 0xFFFFFFFF) {
+    return GbeCheckClassCode (GbePciBase);
+  }
+
+  return FALSE;
+}
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/Library/PeiDxeSmmGbeLib/PeiDxeSmmGbeLib.inf b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/Library/PeiDxeSmmGbeLib/PeiDxeSmmGbeLib.inf
new file mode 100644
index 0000000000..4fef1288af
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/Library/PeiDxeSmmGbeLib/PeiDxeSmmGbeLib.inf
@@ -0,0 +1,43 @@
+## @file
+# Gbe Library.
+#
+# All function in this library is available for PEI, DXE, and SMM,
+# But do not support UEFI RUNTIME environment call.
+#
+#  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#  SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+
+[Defines]
+INF_VERSION = 0x00010017
+BASE_NAME = PeiDxeSmmGbeLib
+FILE_GUID = FC022ED0-6EB3-43E1-A740-0BA27CBBD010
+VERSION_STRING = 1.0
+MODULE_TYPE = BASE
+LIBRARY_CLASS = GbeLib
+
+
+[LibraryClasses]
+BaseLib
+IoLib
+DebugLib
+PciSegmentLib
+PchInfoLib
+PchPcrLib
+PchCycleDecodingLib
+PmcPrivateLib
+SpiAccessLib
+GbeMdiLib
+PchPciBdfLib
+
+
+[Packages]
+MdePkg/MdePkg.dec
+TigerlakeSiliconPkg/SiPkg.dec
+
+
+[Sources]
+GbeLib.c
+
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/LibraryPrivate/PeiDxeSmmGbeMdiLib/GbeMdiLib.c b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/LibraryPrivate/PeiDxeSmmGbeMdiLib/GbeMdiLib.c
new file mode 100644
index 0000000000..7917474406
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/LibraryPrivate/PeiDxeSmmGbeMdiLib/GbeMdiLib.c
@@ -0,0 +1,388 @@
+/** @file
+  Gbe MDI Library.
+  All function in this library is available for PEI, DXE, and SMM,
+  But do not support UEFI RUNTIME environment call.
+
+  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Base.h>
+#include <Uefi/UefiBaseType.h>
+#include <Library/TimerLib.h>
+#include <Library/IoLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseLib.h>
+#include <Library/GbeMdiLib.h>
+#include <Register/GbeRegs.h>
+
+
+/**
+  Validates both Phy Address and Regster.
+
+  @param [in]  PhyAddress
+  @param [in]  PhyRegister
+
+  @retval BOOLEAN   TRUE  Validation passed
+                    FALSE If the data is not within its range
+
+**/
+BOOLEAN
+IsPhyAddressRegisterValid (
+  IN      UINT32  PhyAddress,
+  IN      UINT32  PhyRegister
+  )
+{
+  if (((PhyAddress & (~B_PHY_MDI_PHY_ADDRESS_MASK)) != 0) || ((PhyRegister & (~B_PHY_MDI_PHY_REGISTER_MASK)) != 0)) {
+    DEBUG ((DEBUG_ERROR, "IsPhyAddressRegisterValid validation failed! PhyAddress: 0x%08X PhyRegister: 0x%08X \n", PhyAddress, PhyRegister));
+    return FALSE;
+  }
+  return TRUE;
+}
+
+/**
+  Change Extended Device Control Register BIT 11 to 1 which
+  forces the interface between the MAC and the Phy to be on SMBus.
+  Cleared on the assertion of PCI reset.
+
+  @param [in]  GbeBar   GbE MMIO space
+
+**/
+VOID
+GbeMdiForceMacToSmb (
+  IN      UINT32  GbeBar
+  )
+{
+  MmioOr32 (GbeBar + R_GBE_MEM_CSR_CTRL_EXT, B_GBE_MEM_CSR_CTRL_EXT_FORCE_SMB);
+}
+
+/**
+  Test for MDIO operation complete.
+
+  @param [in]  GbeBar   GbE MMIO space
+
+  @retval EFI_SUCCESS
+  @retval EFI_TIMEOUT
+**/
+EFI_STATUS
+GbeMdiWaitReady (
+  IN      UINT32  GbeBar
+  )
+{
+  UINT32  Count;
+
+  for (Count = 0; Count < GBE_MAX_LOOP_TIME; ++Count) {
+    if (MmioRead32 (GbeBar + R_GBE_MEM_CSR_MDIC) & B_GBE_MEM_CSR_MDIC_RB) {
+      return EFI_SUCCESS;
+    }
+    MicroSecondDelay (GBE_ACQUIRE_MDIO_DELAY);
+  }
+  DEBUG ((DEBUG_ERROR, "GbeMdiWaitReady Timeout reached. MDIO operation failed to complete in %d micro seconds\n", GBE_MAX_LOOP_TIME * GBE_ACQUIRE_MDIO_DELAY));
+  return EFI_TIMEOUT;
+}
+
+/**
+  Acquire MDIO software semaphore.
+
+  1. Ensure that MBARA offset F00h [5] = 1b
+  2. Poll MBARA offset F00h [5] up to 200ms
+
+  @param [in] GbeBar   GbE MMIO space
+
+  @retval EFI_SUCCESS
+  @retval EFI_TIMEOUT
+**/
+EFI_STATUS
+GbeMdiAcquireMdio (
+  IN      UINT32  GbeBar
+  )
+{
+  UINT32  ExtCnfCtrl;
+  UINT32  Count;
+
+  MmioOr32 (GbeBar + R_GBE_MEM_CSR_EXTCNF_CTRL, B_GBE_MEM_CSR_EXTCNF_CTRL_SWFLAG);
+  for (Count = 0; Count < GBE_MAX_LOOP_TIME; ++Count) {
+    ExtCnfCtrl = MmioRead32 (GbeBar + R_GBE_MEM_CSR_EXTCNF_CTRL);
+    if (ExtCnfCtrl & B_GBE_MEM_CSR_EXTCNF_CTRL_SWFLAG) {
+      return EFI_SUCCESS;
+    }
+    MicroSecondDelay (GBE_ACQUIRE_MDIO_DELAY);
+  }
+  DEBUG ((DEBUG_ERROR, "GbeMdiAcquireMdio Timeout. Unable to acquire MDIO Semaphore in %d micro seconds\n", GBE_MAX_LOOP_TIME * GBE_ACQUIRE_MDIO_DELAY));
+  return EFI_TIMEOUT;
+}
+
+/**
+  Release MDIO software semaphore by clearing MBARA offset F00h [5]
+
+  @param [in]  GbeBar   GbE MMIO space
+**/
+VOID
+GbeMdiReleaseMdio (
+  IN      UINT32  GbeBar
+  )
+{
+  ASSERT (MmioRead32 (GbeBar + R_GBE_MEM_CSR_EXTCNF_CTRL) & B_GBE_MEM_CSR_EXTCNF_CTRL_SWFLAG);
+  MmioAnd32 (GbeBar + R_GBE_MEM_CSR_EXTCNF_CTRL, (UINT32) ~B_GBE_MEM_CSR_EXTCNF_CTRL_SWFLAG);
+  ASSERT ((MmioRead32 (GbeBar + R_GBE_MEM_CSR_EXTCNF_CTRL) & B_GBE_MEM_CSR_EXTCNF_CTRL_SWFLAG) == 0);
+}
+
+/**
+  Sets page on MDI
+  Page setting is attempted twice.
+  If first attempt failes MAC and the Phy are force to be on SMBus.
+
+  Waits 4 mSec after page setting
+
+  @param [in]  GbeBar  GbE MMIO space
+  @param [in]  Data    Value to write in lower 16bits.
+
+  @retval EFI_SUCCESS       Page setting was successfull
+  @retval EFI_DEVICE_ERROR  Returned if both attermps of setting page failed
+**/
+EFI_STATUS
+GbeMdiSetPage (
+  IN      UINT32  GbeBar,
+  IN      UINT32  Page
+  )
+{
+  EFI_STATUS  Status;
+
+  MmioWrite32 (GbeBar + R_GBE_MEM_CSR_MDIC, (~B_PHY_MDI_READY) & (B_PHY_MDI_WRITE | B_PHY_MDI_PHY_ADDRESS_01 | R_PHY_MDI_PHY_REG_SET_PAGE | ((Page * 32) & 0xFFFF)));
+
+  Status = GbeMdiWaitReady (GbeBar);
+
+  if (Status == EFI_TIMEOUT) {
+    DEBUG ((DEBUG_INFO, "GbeMdiSetPage Timeout reached. Forcing the interface between the MAC and the Phy to be on SMBus\n"));
+    GbeMdiForceMacToSmb (GbeBar);
+    //
+    // Retry page setting
+    //
+    MmioWrite32 (GbeBar + R_GBE_MEM_CSR_MDIC, (~B_PHY_MDI_READY) & (B_PHY_MDI_WRITE | B_PHY_MDI_PHY_ADDRESS_01 | R_PHY_MDI_PHY_REG_SET_PAGE | ((Page * 32) & 0xFFFF)));
+    Status = GbeMdiWaitReady (GbeBar);
+    if (Status == EFI_TIMEOUT) {
+      DEBUG ((DEBUG_ERROR, "GbeMdiSetPage retry page setting failed!\n"));
+      return EFI_DEVICE_ERROR;
+    }
+  }
+
+  //
+  // Delay required for page to set properly
+  //
+  MicroSecondDelay (GBE_MDI_SET_PAGE_DELAY);
+
+  return Status;
+}
+
+/**
+  Sets Register in current page.
+
+  @param [in]  GbeBar      GbE MMIO space
+  @param [in]  register    Register number valid only in lower 16 Bits
+
+  @return EFI_STATUS
+**/
+EFI_STATUS
+GbeMdiSetRegister (
+  IN      UINT32  GbeBar,
+  IN      UINT32  Register
+  )
+{
+  MmioWrite32 (GbeBar + R_GBE_MEM_CSR_MDIC, (~B_PHY_MDI_READY) & (B_PHY_MDI_WRITE | B_PHY_MDI_PHY_ADDRESS_01 | R_PHY_MDI_PHY_REG_SET_ADDRESS | (Register & 0xFFFF)));
+  return GbeMdiWaitReady (GbeBar);
+}
+
+/**
+  Perform MDI write.
+
+  @param [in]  GbeBar       GbE MMIO space
+  @param [in]  PhyAddress   Phy Address General - 02 or Specific - 01
+  @param [in]  PhyRegister  Phy Register
+  @param [in]  WriteData    Value to write in lower 16bits.
+
+  @retval EFI_SUCCESS            Based on response from GbeMdiWaitReady
+  @retval EFI_TIMEOUT            Based on response from GbeMdiWaitReady
+  @retval EFI_INVALID_PARAMETER  If Phy Address or Register validaton failed
+**/
+EFI_STATUS
+GbeMdiWrite (
+  IN      UINT32  GbeBar,
+  IN      UINT32  PhyAddress,
+  IN      UINT32  PhyRegister,
+  IN      UINT32  WriteData
+  )
+{
+  if(!IsPhyAddressRegisterValid (PhyAddress, PhyRegister)) {
+    DEBUG ((DEBUG_ERROR, "GbeMdiWrite PhyAddressRegister validaton failed!\n"));
+    return EFI_INVALID_PARAMETER;
+  }
+
+  MmioWrite32 (GbeBar + R_GBE_MEM_CSR_MDIC, (~B_PHY_MDI_READY) & (B_PHY_MDI_WRITE | PhyAddress | PhyRegister | (WriteData & 0xFFFF)));
+  return GbeMdiWaitReady (GbeBar);
+}
+
+/**
+  Perform MDI read.
+
+  @param [in]  GbeBar       GbE MMIO space
+  @param [in]  PhyAddress   Phy Address General - 02 or Specific - 01
+  @param [in]  PhyRegister  Phy Register
+  @param [out] ReadData     Return Value
+
+  @retval EFI_SUCCESS            Based on response from GbeMdiWaitReady
+  @retval EFI_TIMEOUT            Based on response from GbeMdiWaitReady
+  @retval EFI_INVALID_PARAMETER  If Phy Address or Register validaton failed
+**/
+EFI_STATUS
+GbeMdiRead (
+  IN      UINT32  GbeBar,
+  IN      UINT32  PhyAddress,
+  IN      UINT32  PhyRegister,
+  OUT     UINT16  *ReadData
+  )
+{
+  EFI_STATUS    Status;
+
+  if(!IsPhyAddressRegisterValid (PhyAddress, PhyRegister)) {
+    DEBUG ((DEBUG_ERROR, "GbeMdiRead PhyAddressRegister validaton failed!\n"));
+    return EFI_INVALID_PARAMETER;
+  }
+
+  MmioWrite32 (GbeBar + R_GBE_MEM_CSR_MDIC, (~B_PHY_MDI_READY) & (B_PHY_MDI_READ | PhyAddress | PhyRegister));
+  Status = GbeMdiWaitReady (GbeBar);
+  if (EFI_SUCCESS == Status) {
+    *ReadData = (UINT16) MmioRead32 (GbeBar + R_GBE_MEM_CSR_MDIC);
+  }
+  return Status;
+}
+
+/**
+  Gets Phy Revision and Model Number
+  from PHY IDENTIFIER register 2 (offset 3)
+
+  @param [in]  GbeBar           GbE MMIO space
+  @param [out] LanPhyRevision   Return Value
+
+  @return EFI_STATUS
+  @return EFI_INVALID_PARAMETER When GbeBar is incorrect
+                                When Phy register or address is out of bounds
+**/
+EFI_STATUS
+GbeMdiGetLanPhyRevision (
+  IN      UINT32  GbeBar,
+  OUT     UINT16  *LanPhyRevision
+  )
+{
+  EFI_STATUS    Status;
+  UINT8         LpcdLoop;
+  UINT8         Delay;
+
+  if (!((GbeBar & 0xFFFFF000) > 0)) {
+    DEBUG ((DEBUG_ERROR, "GbeMdiGetLanPhyRevision GbeBar validation failed! Bar: 0x%08X \n", GbeBar));
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Status = GbeMdiAcquireMdio (GbeBar);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "GbeMdiGetLanPhyRevision failed to aquire MDIO semaphore. Status: %r\n", Status));
+    return Status;
+  }
+
+  Status = GbeMdiSetPage (GbeBar, PHY_MDI_PAGE_769_PORT_CONTROL_REGISTERS);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "GbeMdiGetLanPhyRevision failed to Set Page 769. Status: %r\n", Status));
+    GbeMdiReleaseMdio (GbeBar);
+    return Status;
+  }
+
+  //
+  //  Set register to: Custom Mode Control
+  //   Reduced MDIO frequency access (slow mdio)
+  //   BIT 10 set to 1
+  //
+  Status = GbeMdiWrite (GbeBar, B_PHY_MDI_PHY_ADDRESS_01, MDI_REG_SHIFT (R_PHY_MDI_PAGE_769_REGISETER_16_CMC), BIT13 | B_PHY_MDI_PAGE_769_REGISETER_16_CMC_MDIO_FREQ_ACCESS | BIT8 | BIT7);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "GbeMdiGetLanPhyRevision failed to enable slow MDIO mode. Status: %r\n", Status));
+    GbeMdiReleaseMdio (GbeBar);
+    return Status;
+  }
+
+  //
+  // Read register PHY Version from PHY IDENTIFIER 2 (offset 0x3)
+  //  Bits [9:4]   - Device Model Number
+  //  Bits [3:0]   - Device Revision Number
+  //
+  Status = GbeMdiRead (GbeBar, B_PHY_MDI_PHY_ADDRESS_02, R_PHY_MDI_GENEREAL_REGISTER_03_PHY_IDENTIFIER_2, LanPhyRevision);
+
+  //
+  // Failed to obtain PHY REV
+  //
+  if (*LanPhyRevision == 0x0) {
+    if ((MmioRead32 (GbeBar + R_GBE_MEM_CSR_CTRL) & (B_GBE_MEM_CSR_CTRL_LANPHYPC_OVERRIDE | B_GBE_MEM_CSR_CTRL_LANPHYPC_VAL))) {
+      DEBUG ((DEBUG_ERROR, "GbeMdiGetLanPhyRevision failed to read Phy Revision. Other component tried to initialize GbE and failed.\n"));
+      Status = EFI_DEVICE_ERROR;
+      goto phy_exit;
+    }
+    DEBUG ((DEBUG_INFO, "GbeMdiGetLanPhyRevision failed to read Revision. Overriding LANPHYPC\n", Status));
+    //
+    // Taking over LANPHYPC
+    // 1. SW signal override - 1st cycle.
+    // 2. Turn LCD on - 2nd cycle.
+    //
+    MmioOr32 (GbeBar + R_GBE_MEM_CSR_CTRL, B_GBE_MEM_CSR_CTRL_LANPHYPC_OVERRIDE);
+    MmioOr32 (GbeBar + R_GBE_MEM_CSR_CTRL, B_GBE_MEM_CSR_CTRL_LANPHYPC_VAL);
+
+    //
+    // Poll on LPCD for 100mSec
+    //
+    LpcdLoop = 101;
+    while (LpcdLoop > 0) {
+      if (MmioRead32 (GbeBar + R_GBE_MEM_CSR_CTRL_EXT) & B_GBE_MEM_CSR_CTRL_EXT_LPCD) {
+        break;
+      } else {
+        LpcdLoop--;
+        MicroSecondDelay (1000);
+      }
+    }
+
+    if (LpcdLoop > 0) {
+      Delay = 100;
+      Status = GbeMdiRead (GbeBar, B_PHY_MDI_PHY_ADDRESS_02, R_PHY_MDI_GENEREAL_REGISTER_03_PHY_IDENTIFIER_2, LanPhyRevision);
+      while (*LanPhyRevision == 0 && Delay > 0) {
+        Status = GbeMdiRead (GbeBar, B_PHY_MDI_PHY_ADDRESS_02, R_PHY_MDI_GENEREAL_REGISTER_03_PHY_IDENTIFIER_2, LanPhyRevision);
+        if (EFI_ERROR(Status)) {
+          break;
+        }
+        MicroSecondDelay (1000);
+        Delay --;
+      }
+    }
+    //
+    // Restore LANPHYPC
+    // 1. Turn LCD off - 1st cycle.
+    // 2. Remove SW signal override - 2nd cycle.
+    //
+    MmioAnd32 (GbeBar + R_GBE_MEM_CSR_CTRL, (UINT32) ~B_GBE_MEM_CSR_CTRL_LANPHYPC_VAL);
+    MmioAnd32 (GbeBar + R_GBE_MEM_CSR_CTRL, (UINT32) ~B_GBE_MEM_CSR_CTRL_LANPHYPC_OVERRIDE);
+  }
+
+phy_exit:
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "GbeMdiGetLanPhyRevision failed to read Revision and Model Number from PHY Identifier 2. Status: %r\n", Status));
+    GbeMdiReleaseMdio (GbeBar);
+    return Status;
+  }
+
+  //
+  //  Switch back to normal MDIO frequency access
+  //
+  Status = GbeMdiWrite (GbeBar, B_PHY_MDI_PHY_ADDRESS_01,  MDI_REG_SHIFT (R_PHY_MDI_PAGE_769_REGISETER_16_CMC), (~B_PHY_MDI_PAGE_769_REGISETER_16_CMC_MDIO_FREQ_ACCESS) & (BIT13 | BIT8 | BIT7));
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "GbeMdiGetLanPhyRevision failed to disable slow MDIO mode. Status: %r\n", Status));
+  }
+
+  GbeMdiReleaseMdio (GbeBar);
+
+  return Status;
+}
+
diff --git a/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/LibraryPrivate/PeiDxeSmmGbeMdiLib/PeiDxeSmmGbeMdiLib.inf b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/LibraryPrivate/PeiDxeSmmGbeMdiLib/PeiDxeSmmGbeMdiLib.inf
new file mode 100644
index 0000000000..99a01177f6
--- /dev/null
+++ b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/Gbe/LibraryPrivate/PeiDxeSmmGbeMdiLib/PeiDxeSmmGbeMdiLib.inf
@@ -0,0 +1,34 @@
+## @file
+# Gbe MDI Library.
+#
+# All function in this library is available for PEI, DXE, and SMM,
+# But do not support UEFI RUNTIME environment call.
+#
+#  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#  SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+
+[Defines]
+INF_VERSION = 0x00010017
+BASE_NAME = PeiDxeSmmGbeMdiLib
+FILE_GUID = 0360E6F6-892A-4852-BF98-15C0D30D8A48
+VERSION_STRING = 1.0
+MODULE_TYPE = BASE
+LIBRARY_CLASS = GbeMdiLib
+
+
+[LibraryClasses]
+BaseLib
+IoLib
+DebugLib
+TimerLib
+
+[Packages]
+MdePkg/MdePkg.dec
+TigerlakeSiliconPkg/SiPkg.dec
+
+
+[Sources]
+GbeMdiLib.c
-- 
2.24.0.windows.2