From: "Sheng Wei" <w.sheng@intel.com>
To: devel@edk2.groups.io
Cc: Eric Dong <eric.dong@intel.com>, Ray Ni <ray.ni@intel.com>,
Laszlo Ersek <lersek@redhat.com>,
Rahul Kumar <rahul1.kumar@intel.com>,
Jiewen Yao <jiewen.yao@intel.com>,
Roger Feng <roger.feng@intel.com>
Subject: [PATCH v6 2/3] UefiCpuPkg/CpuExceptionHandlerLib: Clear CET shadow stack token busy bit
Date: Fri, 26 Feb 2021 16:03:15 +0800 [thread overview]
Message-ID: <20210226080316.13724-3-w.sheng@intel.com> (raw)
In-Reply-To: <20210226080316.13724-1-w.sheng@intel.com>
If CET shadows stack feature enabled in SMM and stack switch is enabled.
When code execute from SMM handler to SMM exception, CPU will check SMM
exception shadow stack token busy bit if it is cleared or not.
If it is set, it will trigger #DF exception.
If it is not set, CPU will set the busy bit when enter SMM exception.
So, the busy bit should be cleared when return back form SMM exception to
SMM handler. Otherwise, keeping busy bit 1 will cause to trigger #DF
exception when enter SMM exception next time.
So, we use instruction SAVEPREVSSP, CLRSSBSY and RSTORSSP to clear the
shadow stack token busy bit before RETF instruction in SMM exception.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3192
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Roger Feng <roger.feng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
---
.../DxeCpuExceptionHandlerLib.inf | 3 ++
.../PeiCpuExceptionHandlerLib.inf | 3 ++
.../SecPeiCpuExceptionHandlerLib.inf | 4 ++
.../SmmCpuExceptionHandlerLib.inf | 3 ++
.../X64/Xcode5ExceptionHandlerAsm.nasm | 46 +++++++++++++++++++++-
.../Xcode5SecPeiCpuExceptionHandlerLib.inf | 4 ++
UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c | 15 ++++++-
7 files changed, 75 insertions(+), 3 deletions(-)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf b/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
index 07b34c92a8..e7a81bebdb 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
@@ -43,6 +43,9 @@
gUefiCpuPkgTokenSpaceGuid.PcdCpuStackSwitchExceptionList
gUefiCpuPkgTokenSpaceGuid.PcdCpuKnownGoodStackSize
+[FeaturePcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmStackGuard ## CONSUMES
+
[Packages]
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiCpuExceptionHandlerLib.inf b/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiCpuExceptionHandlerLib.inf
index feae7b3e06..cf5bfe4083 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiCpuExceptionHandlerLib.inf
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiCpuExceptionHandlerLib.inf
@@ -57,3 +57,6 @@
[Pcd]
gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard # CONSUMES
+[FeaturePcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmStackGuard ## CONSUMES
+
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf b/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
index 967cb61ba6..8ae4feae62 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
@@ -49,3 +49,7 @@
LocalApicLib
PeCoffGetEntryPointLib
VmgExitLib
+
+[FeaturePcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmStackGuard ## CONSUMES
+
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/SmmCpuExceptionHandlerLib.inf b/UefiCpuPkg/Library/CpuExceptionHandlerLib/SmmCpuExceptionHandlerLib.inf
index ea5b10b5c8..c9f20da058 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/SmmCpuExceptionHandlerLib.inf
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/SmmCpuExceptionHandlerLib.inf
@@ -53,3 +53,6 @@
DebugLib
VmgExitLib
+[FeaturePcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmStackGuard ## CONSUMES
+
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/Xcode5ExceptionHandlerAsm.nasm b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/Xcode5ExceptionHandlerAsm.nasm
index 26cae56cc5..ebe0eec874 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/Xcode5ExceptionHandlerAsm.nasm
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/Xcode5ExceptionHandlerAsm.nasm
@@ -13,6 +13,7 @@
; Notes:
;
;------------------------------------------------------------------------------
+%include "Nasm.inc"
;
; CommonExceptionHandler()
@@ -23,6 +24,7 @@
extern ASM_PFX(mErrorCodeFlag) ; Error code flags for exceptions
extern ASM_PFX(mDoFarReturnFlag) ; Do far return flag
extern ASM_PFX(CommonExceptionHandler)
+extern ASM_PFX(FeaturePcdGet (PcdCpuSmmStackGuard))
SECTION .data
@@ -371,8 +373,48 @@ DoReturn:
push qword [rax + 0x18] ; save EFLAGS in new location
mov rax, [rax] ; restore rax
popfq ; restore EFLAGS
- DB 0x48 ; prefix to composite "retq" with next "retf"
- retf ; far return
+
+ ; The follow algorithm is used for clear shadow stack token busy bit.
+ ; The comment is based on the sample shadow stack.
+ ; The sample shadow stack layout :
+ ; Address | Context
+ ; +-------------------------+
+ ; 0xFD0 | FREE | it is 0xFD8|0x02|(LMA & CS.L), after SAVEPREVSSP.
+ ; +-------------------------+
+ ; 0xFD8 | Prev SSP |
+ ; +-------------------------+
+ ; 0xFE0 | RIP |
+ ; +-------------------------+
+ ; 0xFE8 | CS |
+ ; +-------------------------+
+ ; 0xFF0 | 0xFF0 | BUSY | BUSY flag cleared after CLRSSBSY
+ ; +-------------------------+
+ ; 0xFF8 | 0xFD8|0x02|(LMA & CS.L) |
+ ; +-------------------------+
+ ; Instructions for Intel Control Flow Enforcement Technology (CET) are supported since NASM version 2.15.01.
+ push rax ; SSP should be 0xFD8 at this point
+ cmp byte [dword ASM_PFX(FeaturePcdGet (PcdCpuSmmStackGuard))], 0
+ jz CetDone
+ mov rax, cr4
+ and rax, 0x800000 ; check if CET is enabled
+ jz CetDone
+ mov rax, 0x04 ; advance past cs:lip:prevssp;supervisor shadow stack token
+ INCSSP_RAX ; After this SSP should be 0xFF8
+ SAVEPREVSSP ; now the shadow stack restore token will be created at 0xFD0
+ READSSP_RAX ; Read new SSP, SSP should be 0x1000
+ push rax
+ sub rax, 0x10
+ CLRSSBSY_RAX ; Clear token at 0xFF0, SSP should be 0 after this
+ sub rax, 0x20
+ RSTORSSP_RAX ; Restore to token at 0xFD0, new SSP will be 0xFD0
+ pop rax
+ mov rax, 0x01 ; Pop off the new save token created
+ INCSSP_RAX ; SSP should be 0xFD8 now
+CetDone:
+ pop rax ; restore rax
+
+ DB 0x48 ; prefix to composite "retq" with next "retf"
+ retf ; far return
DoIret:
iretq
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/Xcode5SecPeiCpuExceptionHandlerLib.inf b/UefiCpuPkg/Library/CpuExceptionHandlerLib/Xcode5SecPeiCpuExceptionHandlerLib.inf
index 743c2aa766..a15f125d5b 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/Xcode5SecPeiCpuExceptionHandlerLib.inf
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/Xcode5SecPeiCpuExceptionHandlerLib.inf
@@ -54,3 +54,7 @@
LocalApicLib
PeCoffGetEntryPointLib
VmgExitLib
+
+[FeaturePcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmStackGuard ## CONSUMES
+
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c b/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c
index 28f8e8e133..7ef3b1d488 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c
@@ -173,6 +173,7 @@ InitShadowStack (
{
UINTN SmmShadowStackSize;
UINT64 *InterruptSspTable;
+ UINT32 InterruptSsp;
if ((PcdGet32 (PcdControlFlowEnforcementPropertyMask) != 0) && mCetSupported) {
SmmShadowStackSize = EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (PcdGet32 (PcdCpuSmmShadowStackSize)));
@@ -191,7 +192,19 @@ InitShadowStack (
ASSERT (mSmmInterruptSspTables != 0);
DEBUG ((DEBUG_INFO, "mSmmInterruptSspTables - 0x%x\n", mSmmInterruptSspTables));
}
- mCetInterruptSsp = (UINT32)((UINTN)ShadowStack + EFI_PAGES_TO_SIZE(1) - sizeof(UINT64));
+
+ //
+ // The highest address on the stack (0xFF8) is a save-previous-ssp token pointing to a location that is 40 bytes away - 0xFD0.
+ // The supervisor shadow stack token is just above it at address 0xFF0. This is where the interrupt SSP table points.
+ // So when an interrupt of exception occurs, we can use SAVESSP/RESTORESSP/CLEARSSBUSY for the supervisor shadow stack,
+ // due to the reason the RETF in SMM exception handler cannot clear the BUSY flag with same CPL.
+ // (only IRET or RETF with different CPL can clear BUSY flag)
+ // Please refer to UefiCpuPkg/Library/CpuExceptionHandlerLib/X64 for the full stack frame at runtime.
+ //
+ InterruptSsp = (UINT32)((UINTN)ShadowStack + EFI_PAGES_TO_SIZE(1) - sizeof(UINT64));
+ *(UINT32 *)(UINTN)InterruptSsp = (InterruptSsp - sizeof(UINT64) * 4) | 0x2;
+ mCetInterruptSsp = InterruptSsp - sizeof(UINT64);
+
mCetInterruptSspTable = (UINT32)(UINTN)(mSmmInterruptSspTables + sizeof(UINT64) * 8 * CpuIndex);
InterruptSspTable = (UINT64 *)(UINTN)mCetInterruptSspTable;
InterruptSspTable[1] = mCetInterruptSsp;
--
2.16.2.windows.1
next prev parent reply other threads:[~2021-02-26 8:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-26 8:03 [PATCH v6 0/3] Fix CET shadow stack token busy bit clear issue Sheng Wei
2021-02-26 8:03 ` [PATCH v6 1/3] MdePkg/Include: Add CET instructions to Nasm.inc Sheng Wei
2021-02-26 8:03 ` Sheng Wei [this message]
2021-03-01 6:54 ` [PATCH v6 2/3] UefiCpuPkg/CpuExceptionHandlerLib: Clear CET shadow stack token busy bit Ni, Ray
2021-02-26 8:03 ` [PATCH v6 3/3] UefiCpuPkg/PiSmmCpuDxeSmm: Fix SMM stack offset is not correct Sheng Wei
2021-02-26 12:21 ` Yao, Jiewen
2021-03-01 5:01 ` Ni, Ray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210226080316.13724-3-w.sheng@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox