[PATCH edk2-platforms v2 1/4] SbsaQemu: Build infrastructure for StandaloneMm image

["Masahisa Kojima" <masahisa.kojima@linaro.org>]

Add the build infrastructure for compilation of StandaloneMm image.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
---
 .../Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc    | 132 ++++++++++++++++++
 Platform/Qemu/SbsaQemu/SbsaQemu.fdf           |   6 +-
 .../Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf    |  93 ++++++++++++
 3 files changed, 228 insertions(+), 3 deletions(-)
 create mode 100644 Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
 create mode 100644 Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf

diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
new file mode 100644
index 000000000000..87f5ee351eaa
--- /dev/null
+++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
@@ -0,0 +1,132 @@
+#
+#  Copyright (c) 2020, Linaro Limited. All rights reserved.
+#
+#  SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+  PLATFORM_NAME                  = SbsaQemuStandaloneMm
+  PLATFORM_GUID                  = A64CC0F5-7ACD-4975-BBE7-7EF6739C8668
+  PLATFORM_VERSION               = 1.0
+  DSC_SPECIFICATION              = 0x00010011
+  OUTPUT_DIRECTORY               = Build/$(PLATFORM_NAME)
+  SUPPORTED_ARCHITECTURES        = AARCH64
+  BUILD_TARGETS                  = DEBUG|RELEASE|NOOPT
+  SKUID_IDENTIFIER               = DEFAULT
+  FLASH_DEFINITION               = Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
+  DEFINE DEBUG_MESSAGE           = TRUE
+
+  # LzmaF86
+  DEFINE COMPRESSION_TOOL_GUID   = D42AE6BD-1352-4bfb-909A-CA72A6EAE889
+
+################################################################################
+#
+# Library Class section - list of all Library Classes needed by this Platform.
+#
+################################################################################
+[LibraryClasses]
+  #
+  # Basic
+  #
+  BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+  BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+  DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
+  DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
+  ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
+  FvLib|StandaloneMmPkg/Library/FvLib/FvLib.inf
+  HobLib|StandaloneMmPkg/Library/StandaloneMmCoreHobLib/StandaloneMmCoreHobLib.inf
+  IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+  MemLib|StandaloneMmPkg/Library/StandaloneMmMemLib/StandaloneMmMemLib.inf
+  MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationLib.inf
+  PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+  PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
+  PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+  ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
+
+  #
+  # Entry point
+  #
+  StandaloneMmDriverEntryPoint|MdePkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
+
+  ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
+  StandaloneMmMmuLib|ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.inf
+  ArmSvcLib|ArmPkg/Library/ArmSvcLib/ArmSvcLib.inf
+  CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
+  PeCoffExtraActionLib|StandaloneMmPkg/Library/StandaloneMmPeCoffExtraActionLib/StandaloneMmPeCoffExtraActionLib.inf
+
+  # ARM PL011 UART Driver
+  PL011UartClockLib|ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
+  PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
+  SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
+
+  StandaloneMmCoreEntryPoint|StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
+
+  #
+  # It is not possible to prevent the ARM compiler for generic intrinsic functions.
+  # This library provides the instrinsic functions generate by a given compiler.
+  # And NULL mean link this library into all ARM images.
+  #
+  NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
+
+[LibraryClasses.common.MM_STANDALONE]
+  HobLib|StandaloneMmPkg/Library/StandaloneMmHobLib/StandaloneMmHobLib.inf
+  MmServicesTableLib|MdePkg/Library/StandaloneMmServicesTableLib/StandaloneMmServicesTableLib.inf
+  MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmMemoryAllocationLib/StandaloneMmMemoryAllocationLib.inf
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+[PcdsFixedAtBuild]
+  gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800000CF
+  gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xff
+  gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x0f
+
+  ## PL011 - Serial Terminal
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x60040000
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
+
+  gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler|0x2
+
+###################################################################################################
+#
+# Components Section - list of the modules and components that will be processed by compilation
+#                      tools and the EDK II tools to generate PE32/PE32+/Coff image files.
+#
+# Note: The EDK II DSC file is not used to specify how compiled binary images get placed
+#       into firmware volume images. This section is just a list of modules to compile from
+#       source into UEFI-compliant binaries.
+#       It is the FDF file that contains information on combining binary files into firmware
+#       volume images, whose concept is beyond UEFI and is described in PI specification.
+#       Binary modules do not need to be listed in this section, as they should be
+#       specified in the FDF file. For example: Shell binary (Shell_Full.efi), FAT binary (Fat.efi),
+#       Logo (Logo.bmp), and etc.
+#       There may also be modules listed in this section that are not required in the FDF file,
+#       When a module listed here is excluded from FDF file, then UEFI-compliant binary will be
+#       generated for it, but the binary will not be put into any firmware volume.
+#
+###################################################################################################
+[Components.common]
+  #
+  # MM Core
+  #
+  StandaloneMmPkg/Core/StandaloneMmCore.inf
+  StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
+
+###################################################################################################
+#
+# BuildOptions Section - Define the module specific tool chain flags that should be used as
+#                        the default flags for a module. These flags are appended to any
+#                        standard flags that are defined by the build process. They can be
+#                        applied for any modules or only those modules with the specific
+#                        module style (EDK or EDKII) specified in [Components] section.
+#
+###################################################################################################
+[BuildOptions.AARCH64]
+  GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000 -march=armv8-a+nofp
diff --git a/Platform/Qemu/SbsaQemu/SbsaQemu.fdf b/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
index c35e3ed44054..b61ae1891233 100644
--- a/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
+++ b/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
@@ -21,10 +21,10 @@
 
 [FD.SBSA_FLASH0]
 BaseAddress   = 0x00000000
-Size          = 0x00200000
+Size          = 0x00400000
 ErasePolarity = 1
 BlockSize     = 0x00001000
-NumBlocks     = 0x200
+NumBlocks     = 0x400
 
 ################################################################################
 #
@@ -47,7 +47,7 @@ [FD.SBSA_FLASH0]
 FILE = Platform/Qemu/Sbsa/bl1.bin
 
 # and FIP (BL2 + BL31)
-0x00008000|0x00020000
+0x00008000|0x00300000
 FILE = Platform/Qemu/Sbsa/fip.bin
 
 ################################################################################
diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
new file mode 100644
index 000000000000..a1acefcfb0a7
--- /dev/null
+++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
@@ -0,0 +1,93 @@
+#
+#  Copyright (c) 2020, Linaro Limited. All rights reserved.
+#
+#  SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into  the Flash Device Image.  Each FD section
+# defines one flash "device" image.  A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash"  image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.STANDALONE_MM]
+BaseAddress   = 0x20001000|gArmTokenSpaceGuid.PcdFdBaseAddress
+Size          = 0x00e00000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the device (14MiB).
+ErasePolarity = 1
+
+BlockSize     = 0x00001000
+NumBlocks     = 0x0e00
+
+0x00000000|0x00280000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+[FV.FVMAIN_COMPACT]
+FvAlignment        = 16
+ERASE_POLARITY     = 1
+MEMORY_MAPPED      = TRUE
+STICKY_WRITE       = TRUE
+LOCK_CAP           = TRUE
+LOCK_STATUS        = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP  = TRUE
+WRITE_STATUS       = TRUE
+WRITE_LOCK_CAP     = TRUE
+WRITE_LOCK_STATUS  = TRUE
+READ_DISABLED_CAP  = TRUE
+READ_ENABLED_CAP   = TRUE
+READ_STATUS        = TRUE
+READ_LOCK_CAP      = TRUE
+READ_LOCK_STATUS   = TRUE
+
+  INF StandaloneMmPkg/Core/StandaloneMmCore.inf
+  INF StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
+
+################################################################################
+#
+# Rules are use with the [FV] section's module INF type to define
+# how an FFS file is created for a given INF file. The following Rule are the default
+# rules for the different module type. User can add the customized rules to define the
+# content of the FFS file.
+#
+################################################################################
+
+
+############################################################################
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
+############################################################################
+#
+#[Rule.Common.DXE_DRIVER]
+#  FILE DRIVER = $(NAMED_GUID) {
+#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+#    COMPRESS PI_STD {
+#      GUIDED {
+#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
+#        UI       STRING="$(MODULE_NAME)" Optional
+#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+#      }
+#    }
+#  }
+#
+############################################################################
+
+[Rule.Common.MM_CORE_STANDALONE]
+  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
+    PE32  PE32 Align = Auto             $(INF_OUTPUT)/$(MODULE_NAME).efi
+  }
+
+[Rule.Common.MM_STANDALONE]
+  FILE MM_STANDALONE = $(NAMED_GUID) {
+    SMM_DEPEX SMM_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
+    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI        STRING="$(MODULE_NAME)" Optional
+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+  }
-- 
2.17.1