* [edk2-non-osi PATCH 2/4] Marvell/Armada7k8k: Move device tree sources from edk2-platforms
2021-03-18 19:57 [edk2-non-osi/edk2-platforms PATCH 0/4] Marvell SoCs device tree update Marcin Wojtas
@ 2021-03-18 19:57 ` Marcin Wojtas
2021-03-18 19:57 ` [edk2-platforms PATCH 1/4] Marvell/Armada7k8k: Remove " Marcin Wojtas
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Marcin Wojtas @ 2021-03-18 19:57 UTC (permalink / raw)
To: devel; +Cc: leif, ard.biesheuvel, mw, jaz, kostap, upstream, jon
edk2-non-osi project is a more proper place for keeping
the device tree sources, so keep it here from now on.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Silicon/Marvell/Armada7k8k/DeviceTree/Armada70x0Db.inf | 22 +
Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0Db.inf | 22 +
Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf | 22 +
Silicon/Marvell/Armada7k8k/DeviceTree/armada-7020.dtsi | 16 +
Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts | 267 ++++++++++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi | 16 +
Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi | 64 +++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8020.dtsi | 26 +
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts | 336 ++++++++++++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts | 377 +++++++++++++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi | 25 +
Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi | 108 ++++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi | 31 ++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi | 43 ++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi | 264 +++++++++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi | 10 +
Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi | 560 ++++++++++++++++++++
17 files changed, 2209 insertions(+)
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/Armada70x0Db.inf
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0Db.inf
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-7020.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-8020.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/Armada70x0Db.inf b/Silicon/Marvell/Armada7k8k/DeviceTree/Armada70x0Db.inf
new file mode 100644
index 0000000..b533578
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/Armada70x0Db.inf
@@ -0,0 +1,22 @@
+## @file
+#
+# Device tree description of the Marvell Armada 7040 DB platform
+#
+# Copyright (c) 2018, Marvell International Ltd. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = Armada70x0DbDeviceTree
+ FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
+ MODULE_TYPE = USER_DEFINED
+ VERSION_STRING = 1.0
+
+[Sources]
+ armada-7040-db.dts
+
+[Packages]
+ MdePkg/MdePkg.dec
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0Db.inf b/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0Db.inf
new file mode 100644
index 0000000..378fad2
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0Db.inf
@@ -0,0 +1,22 @@
+## @file
+#
+# Device tree description of the Marvell Armada 8040 DB platform
+#
+# Copyright (c) 2018, Marvell International Ltd. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = Armada80x0DbDeviceTree
+ FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
+ MODULE_TYPE = USER_DEFINED
+ VERSION_STRING = 1.0
+
+[Sources]
+ armada-8040-db.dts
+
+[Packages]
+ MdePkg/MdePkg.dec
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf b/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf
new file mode 100644
index 0000000..540e1a7
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf
@@ -0,0 +1,22 @@
+## @file
+#
+# Device tree description of the Marvell Armada 8040 MacchiatoBin platform
+#
+# Copyright (c) 2018, Marvell International Ltd. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = Armada80x0McBinDeviceTree
+ FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
+ MODULE_TYPE = USER_DEFINED
+ VERSION_STRING = 1.0
+
+[Sources]
+ armada-8040-mcbin.dts
+
+[Packages]
+ MdePkg/MdePkg.dec
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7020.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7020.dtsi
new file mode 100644
index 0000000..e2edc26
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7020.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 7020 SoC, made of an AP806 Dual and
+ * one CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+#include "armada-70x0.dtsi"
+
+/ {
+ model = "Marvell Armada 7020";
+ compatible = "marvell,armada7020", "marvell,armada-ap806-dual",
+ "marvell,armada-ap806";
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts
new file mode 100644
index 0000000..f5878ef
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada 7040 Development board platform
+ */
+
+#include "armada-7040.dtsi"
+
+#define GPIO_ACTIVE_HIGH 0
+#define GPIO_ACTIVE_LOW 1
+
+/ {
+ model = "Marvell Armada 7040 DB board";
+ compatible = "marvell,armada7040-db", "marvell,armada7040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ aliases {
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ };
+
+ cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3h0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3h1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp0_usb3_0_phy: cp0-usb3-0-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp0_reg_usb3_0_vbus>;
+ };
+
+ cp0_usb3_1_phy: cp0-usb3-1-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp0_reg_usb3_1_vbus>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xce0000>;
+ };
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+
+&cp0_pcie2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ expander0: pca9555@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ /*
+ * IO0_0: USB3_PWR_EN0 IO1_0: USB_3_1_Dev_Detect
+ * IO0_1: USB3_PWR_EN1 IO1_1: USB2_1_current_limit
+ * IO0_2: DDR3_4_Detect IO1_2: Hcon_IO_RstN
+ * IO0_3: USB2_DEVICE_DETECT
+ * IO0_4: GPIO_0 IO1_4: SD_Status
+ * IO0_5: GPIO_1 IO1_5: LDO_5V_Enable
+ * IO0_6: IHB_5V_Enable IO1_6: PWR_EN_eMMC
+ * IO0_7: IO1_7: SDIO_Vcntrl
+ */
+ };
+};
+
+&cp0_nand_controller {
+ /*
+ * SPI on CPM and NAND have common pins on this board. We can
+ * use only one at a time. To enable the NAND (which will
+ * disable the SPI), the "status = "okay";" line have to be
+ * added here.
+ */
+ pinctrl-0 = <&nand_pins>, <&nand_rb>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+
+ partition@200000 {
+ label = "Linux";
+ reg = <0x200000 0xe00000>;
+ };
+
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+
+ };
+ };
+};
+
+&cp0_spi1 {
+ status = "disabled";
+
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x200000>;
+ };
+
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xe00000>;
+ };
+ };
+ };
+};
+
+&cp0_sata0 {
+ status = "okay";
+};
+
+&cp0_usb3_0 {
+ usb-phy = <&cp0_usb3_0_phy>;
+ status = "okay";
+};
+
+&cp0_usb3_1 {
+ usb-phy = <&cp0_usb3_1_phy>;
+ status = "okay";
+};
+
+&ap_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
+
+&cp0_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>;
+};
+
+&cp0_mdio {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+&cp0_eth0 {
+ status = "okay";
+ /* Network PHY */
+ phy-mode = "10gbase-kr";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy2 0>;
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
+};
+
+&cp0_eth1 {
+ status = "okay";
+ /* Network PHY */
+ phy = <&phy0>;
+ phy-mode = "sgmii";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy0 1>;
+};
+
+&cp0_eth2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi
new file mode 100644
index 0000000..03109b2
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and
+ * one CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+#include "armada-70x0.dtsi"
+
+/ {
+ model = "Marvell Armada 7040";
+ compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
+ "marvell,armada-ap806";
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi
new file mode 100644
index 0000000..78f9d87
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 70x0 SoC
+ */
+
+/ {
+ aliases {
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ spi1 = &cp0_spi0;
+ spi2 = &cp0_spi1;
+ };
+};
+
+/*
+ * Instantiate the CP110
+ */
+#define CP110_NAME cp0
+#define CP110_BASE f2000000
+#define CP110_PCIE_IO_BASE 0xf9000000
+#define CP110_PCIE_MEM_BASE 0xf6000000
+#define CP110_PCIE0_BASE f2600000
+#define CP110_PCIE1_BASE f2620000
+#define CP110_PCIE2_BASE f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,armada-7k-pinctrl";
+
+ nand_pins: nand-pins {
+ marvell,pins =
+ "mpp15", "mpp16", "mpp17", "mpp18",
+ "mpp19", "mpp20", "mpp21", "mpp22",
+ "mpp23", "mpp24", "mpp25", "mpp26",
+ "mpp27";
+ marvell,function = "dev";
+ };
+
+ nand_rb: nand-rb {
+ marvell,pins = "mpp13";
+ marvell,function = "nf";
+ };
+ };
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8020.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8020.dtsi
new file mode 100644
index 0000000..5d76345
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8020.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and
+ * two CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+#include "armada-80x0.dtsi"
+
+/ {
+ model = "Marvell Armada 8020";
+ compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
+ "marvell,armada-ap806";
+};
+
+/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
+ * in CP master is not connected (by package) to the oscillator. So
+ * disable it. However, the RTC clock in CP slave is connected to the
+ * oscillator so this one is let enabled.
+ */
+
+&cp0_rtc {
+ status = "disabled";
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts
new file mode 100644
index 0000000..e813922
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada 8040 Development board platform
+ */
+
+#include "armada-8040.dtsi"
+
+#define GPIO_ACTIVE_HIGH 0
+#define GPIO_ACTIVE_LOW 1
+
+/ {
+ model = "Marvell Armada 8040 DB board";
+ compatible = "marvell,armada8040-db", "marvell,armada8040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ aliases {
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth2;
+ ethernet2 = &cp1_eth0;
+ ethernet3 = &cp1_eth1;
+ };
+
+ cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "cp0-usb3h0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "cp0-usb3h1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp0_usb3_0_phy: cp0-usb3-0-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp0_reg_usb3_0_vbus>;
+ };
+
+ cp0_usb3_1_phy: cp0-usb3-1-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp0_reg_usb3_1_vbus>;
+ };
+
+ cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "cp1-usb3h0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp1_usb3_0_phy: cp1-usb3-0-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp1_reg_usb3_0_vbus>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xce0000>;
+ };
+ };
+ };
+};
+
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+ status = "okay";
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+/* CON6 on CP0 expansion */
+&cp0_pcie0 {
+ status = "okay";
+};
+
+/* CON5 on CP0 expansion */
+&cp0_pcie2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* U31 */
+ expander0: pca9555@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ };
+
+ /* U25 */
+ expander1: pca9555@25 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x25>;
+ };
+
+};
+
+/* CON4 on CP0 expansion */
+&cp0_sata0 {
+ status = "okay";
+};
+
+/* CON9 on CP0 expansion */
+&cp0_usb3_0 {
+ usb-phy = <&cp0_usb3_0_phy>;
+ status = "okay";
+};
+
+/* CON10 on CP0 expansion */
+&cp0_usb3_1 {
+ usb-phy = <&cp0_usb3_1_phy>;
+ status = "okay";
+};
+
+&cp0_mdio {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
+};
+
+&cp0_eth2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+};
+
+/* CON6 on CP1 expansion */
+&cp1_pcie0 {
+ status = "okay";
+};
+
+/* CON7 on CP1 expansion */
+&cp1_pcie1 {
+ status = "okay";
+};
+
+/* CON5 on CP1 expansion */
+&cp1_pcie2 {
+ status = "okay";
+};
+
+&cp1_i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&cp1_spi1 {
+ status = "disabled";
+
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Boot";
+ reg = <0x0 0x200000>;
+ };
+ partition@200000 {
+ label = "Filesystem";
+ reg = <0x200000 0xd00000>;
+ };
+ partition@f00000 {
+ label = "Boot_2nd";
+ reg = <0xf00000 0x100000>;
+ };
+ };
+ };
+};
+
+/*
+ * Proper NAND usage will require DPR-76 to be in position 1-2, which disables
+ * MDIO signal of CP1.
+ */
+&cp1_nand_controller {
+ pinctrl-0 = <&nand_pins>, <&nand_rb>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ nand-rb = <0>;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition@200000 {
+ label = "Linux";
+ reg = <0x200000 0xe00000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
+
+/* CON4 on CP1 expansion */
+&cp1_sata0 {
+ status = "okay";
+};
+
+/* CON9 on CP1 expansion */
+&cp1_usb3_0 {
+ usb-phy = <&cp1_usb3_0_phy>;
+ status = "okay";
+};
+
+/* CON10 on CP1 expansion */
+&cp1_usb3_1 {
+ status = "okay";
+};
+
+&cp1_mdio {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+&cp1_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
+};
+
+&cp1_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&ap_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+};
+
+&cp0_sdhci0 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
new file mode 100644
index 0000000..d9c9348
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040.dtsi"
+
+#define GPIO_ACTIVE_HIGH 0
+#define GPIO_ACTIVE_LOW 1
+
+/ {
+ model = "Marvell 8040 MACCHIATOBin";
+ compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ aliases {
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp1_eth0;
+ ethernet2 = &cp1_eth1;
+ ethernet3 = &cp1_eth2;
+ };
+
+ /* Regulator labels correspond with schematics */
+ v_3_3: regulator-3-3v {
+ compatible = "regulator-fixed";
+ regulator-name = "v_3_3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ v_vddo_h: regulator-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "v_vddo_h";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
+ regulator-name = "v_5v0_usb3_hst_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ status = "okay";
+ };
+
+ usb3h0_phy: usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&v_5v0_usb3_hst_vbus>;
+ };
+
+ sfp_eth0: sfp-eth0 {
+ /* CON15,16 - CPM lane 4 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpp0_i2c>;
+ los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_sfpp0_pins>;
+ };
+
+ sfp_eth1: sfp-eth1 {
+ /* CON17,18 - CPS lane 4 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpp1_i2c>;
+ los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+ };
+
+ sfp_eth3: sfp-eth3 {
+ /* CON3,4 - CPS lane 5 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp_1g_i2c>;
+ los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+ bus-width = <8>;
+ /*
+ * Not stable in HS modes - phy needs "more calibration", so add
+ * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+ */
+ marvell,xenon-phy-slow-mode;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+ vqmmc-supply = <&v_vddo_h>;
+};
+
+&cp0_i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+};
+
+&cp0_i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ sfpp0_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ sfpp1_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ sfp_1g_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ };
+};
+
+/* J25 UART header */
+&cp0_uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_uart1_pins>;
+ status = "okay";
+};
+
+&cp0_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_ge_mdio_pins>;
+ status = "okay";
+
+ ge_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cp0_pcie0 {
+ compatible = "marvell,armada8k-pcie-ecam", "snps,dw-pcie-ecam";
+ reg = <0 0xe0000000 0 0xff00000>;
+ bus-range = <0 0xfe>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_pcie_pins>;
+ num-lanes = <4>;
+ num-viewport = <8>;
+ reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
+ ranges = <0x1000000 0x0 0x00000000 0x0 0xeff00000 0x0 0x00010000>,
+ <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>,
+ <0x3000000 0x8 0x00000000 0x8 0x00000000 0x1 0x00000000>;
+ status = "okay";
+};
+
+&cp0_pinctrl {
+ cp0_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp32", "mpp34";
+ marvell,function = "ge";
+ };
+ cp0_i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_uart1_pins: uart1-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "uart1";
+ };
+ cp0_xhci_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ cp0_sfp_1g_pins: sfp-1g-pins {
+ marvell,pins = "mpp51", "mpp53", "mpp54";
+ marvell,function = "gpio";
+ };
+ cp0_pcie_pins: pcie-pins {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
+ cp0_sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+ "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+ cp0_sfpp1_pins: sfpp1-pins {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+};
+
+&cp0_xmdio {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ sfp = <&sfp_eth0>;
+ };
+
+ phy8: ethernet-phy@8 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ sfp = <&sfp_eth1>;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+&cp0_eth0 {
+ status = "okay";
+ /* Network PHY */
+ phy = <&phy0>;
+ phy-mode = "10gbase-kr";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy4 0>;
+};
+
+&cp0_sata0 {
+ /* CPM Lane 0 - U29 */
+ status = "okay";
+};
+
+&cp0_sdhci0 {
+ /* U6 */
+ broken-cd;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sdhci_pins>;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_usb3_0 {
+ /* J38? - USB2.0 only */
+ status = "okay";
+};
+
+&cp0_usb3_1 {
+ /* J38? - USB2.0 only */
+ status = "okay";
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+&cp1_eth0 {
+ status = "okay";
+ /* Network PHY */
+ phy = <&phy8>;
+ phy-mode = "10gbase-kr";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy4 0>;
+};
+
+&cp1_eth1 {
+ /* CPS Lane 0 - J5 (Gigabit RJ45) */
+ status = "okay";
+ /* Network PHY */
+ phy = <&ge_phy>;
+ phy-mode = "sgmii";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy0 1>;
+};
+
+&cp1_eth2 {
+ /* CPS Lane 5 */
+ status = "okay";
+ /* Network PHY */
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy5 2>;
+ sfp = <&sfp_eth3>;
+};
+
+&cp1_pinctrl {
+ cp1_sfpp1_pins: sfpp1-pins {
+ marvell,pins = "mpp8", "mpp10", "mpp11";
+ marvell,function = "gpio";
+ };
+ cp1_spi1_pins: spi1-pins {
+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ cp1_uart0_pins: uart0-pins {
+ marvell,pins = "mpp6", "mpp7";
+ marvell,function = "uart0";
+ };
+ cp1_sfp_1g_pins: sfp-1g-pins {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ cp1_sfpp0_pins: sfpp0-pins {
+ marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
+ marvell,function = "gpio";
+ };
+};
+
+/* J27 UART header */
+&cp1_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_uart0_pins>;
+ status = "okay";
+};
+
+&cp1_sata0 {
+ /* CPS Lane 1 - U32 */
+ /* CPS Lane 3 - U31 */
+ status = "okay";
+};
+
+&cp1_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_spi1_pins>;
+ status = "disabled";
+
+ spi-flash@0 {
+ compatible = "st,w25q32";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&cp1_usb3_0 {
+ /* CPS Lane 2 - CON7 */
+ usb-phy = <&usb3h0_phy>;
+ status = "okay";
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi
new file mode 100644
index 0000000..784ef3f
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and
+ * two CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+#include "armada-80x0.dtsi"
+
+/ {
+ model = "Marvell Armada 8040";
+ compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
+ "marvell,armada-ap806";
+};
+
+/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
+ * in CP master is not connected (by package) to the oscillator. So
+ * disable it. However, the RTC clock in CP slave is connected to the
+ * oscillator so this one is let enabled.
+ */
+&cp0_rtc {
+ status = "disabled";
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi
new file mode 100644
index 0000000..81967e2
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 80x0 SoC family
+ */
+
+/ {
+ aliases {
+ gpio1 = &cp1_gpio1;
+ gpio2 = &cp0_gpio2;
+ spi1 = &cp0_spi0;
+ spi2 = &cp0_spi1;
+ spi3 = &cp1_spi0;
+ spi4 = &cp1_spi1;
+ };
+};
+
+/*
+ * Instantiate the master CP110
+ */
+#define CP110_NAME cp0
+#define CP110_BASE f2000000
+#define CP110_PCIE_IO_BASE 0xf9000000
+#define CP110_PCIE_MEM_BASE 0xf6000000
+#define CP110_PCIE0_BASE f2600000
+#define CP110_PCIE1_BASE f2620000
+#define CP110_PCIE2_BASE f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
+/*
+ * Instantiate the slave CP110
+ */
+#define CP110_NAME cp1
+#define CP110_BASE f4000000
+#define CP110_PCIE_IO_BASE 0xfd000000
+#define CP110_PCIE_MEM_BASE 0xfa000000
+#define CP110_PCIE0_BASE f4600000
+#define CP110_PCIE1_BASE f4620000
+#define CP110_PCIE2_BASE f4640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
+/* The 80x0 has two CP blocks, but uses only one block from each. */
+&cp1_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,armada-8k-cpm-pinctrl";
+ };
+};
+
+&cp1_syscon0 {
+ cp1_pinctrl: pinctrl {
+ compatible = "marvell,armada-8k-cps-pinctrl";
+
+ nand_pins: nand-pins {
+ marvell,pins =
+ "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10", "mpp11",
+ "mpp15", "mpp16", "mpp17", "mpp18",
+ "mpp19", "mpp20", "mpp21", "mpp22",
+ "mpp23", "mpp24", "mpp25", "mpp26",
+ "mpp27";
+ marvell,function = "dev";
+ };
+
+ nand_rb: nand-rb {
+ marvell,pins = "mpp13", "mpp12";
+ marvell,function = "nf";
+ };
+ };
+};
+
+&cp1_crypto {
+ /*
+ * The cryptographic engine found on the cp110
+ * master is enabled by default at the SoC
+ * level. Because it is not possible as of now
+ * to enable two cryptographic engines in
+ * parallel, disable this one by default.
+ */
+ status = "disabled";
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi
new file mode 100644
index 0000000..5985843
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+ model = "Marvell Armada AP806 Dual";
+ compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x000>;
+ enable-method = "psci";
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x001>;
+ enable-method = "psci";
+ };
+ };
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi
new file mode 100644
index 0000000..bae0ed9
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+ model = "Marvell Armada AP806 Quad";
+ compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x000>;
+ enable-method = "psci";
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x001>;
+ enable-method = "psci";
+ };
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x100>;
+ enable-method = "psci";
+ };
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x101>;
+ enable-method = "psci";
+ };
+ };
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi
new file mode 100644
index 0000000..66124bf
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#define IRQ_TYPE_LEVEL_HIGH (1 << 2)
+#define IRQ_TYPE_LEVEL_LOW (1 << 3)
+
+#define GIC_SPI 0
+#define GIC_PPI 1
+
+#define GIC_CPU_MASK_RAW(x) ((x) << 8)
+#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
+
+/dts-v1/;
+
+/ {
+ model = "Marvell Armada AP806";
+ compatible = "marvell,armada-ap806";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ gpio0 = &ap_gpio;
+ spi0 = &spi0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ ap806 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ config-space@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+ gic: interrupt-controller@210000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x210000 0x10000>,
+ <0x220000 0x20000>,
+ <0x240000 0x20000>,
+ <0x260000 0x20000>;
+
+ gic_v2m0: v2m@280000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x280000 0x1000>;
+ arm,msi-base-spi = <160>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m1: v2m@290000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x290000 0x1000>;
+ arm,msi-base-spi = <192>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m2: v2m@2a0000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x2a0000 0x1000>;
+ arm,msi-base-spi = <224>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m3: v2m@2b0000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x2b0000 0x1000>;
+ arm,msi-base-spi = <256>;
+ arm,msi-num-spis = <32>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a72-pmu";
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+
+ odmi: odmi@300000 {
+ compatible = "marvell,odmi-controller";
+ interrupt-controller;
+ msi-controller;
+ marvell,odmi-frames = <4>;
+ reg = <0x300000 0x4000>,
+ <0x304000 0x4000>,
+ <0x308000 0x4000>,
+ <0x30C000 0x4000>;
+ marvell,spi-base = <128>, <136>, <144>, <152>;
+ };
+
+ gicp: gicp@3f0040 {
+ compatible = "marvell,ap806-gicp";
+ reg = <0x3f0040 0x10>;
+ marvell,spi-ranges = <64 64>, <288 64>;
+ msi-controller;
+ };
+
+ pic: interrupt-controller@3f0100 {
+ compatible = "marvell,armada-8k-pic";
+ reg = <0x3f0100 0x10>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ xor@400000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x400000 0x1000>,
+ <0x410000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ xor@420000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x420000 0x1000>,
+ <0x430000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ xor@440000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x440000 0x1000>,
+ <0x450000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ xor@460000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x460000 0x1000>,
+ <0x470000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ spi0: spi@510600 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x510600 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@511000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x511000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+ };
+
+ uart0: serial@512000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x512000 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+ };
+
+ uart1: serial@512100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x512100 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+
+ };
+
+ watchdog: watchdog@610000 {
+ compatible = "arm,sbsa-gwdt";
+ reg = <0x610000 0x1000>, <0x600000 0x1000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ap_sdhci0: sdhci@6e0000 {
+ compatible = "marvell,armada-ap806-sdhci";
+ reg = <0x6e0000 0x300>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core";
+ clocks = <&ap_clk 4>;
+ dma-coherent;
+ marvell,xenon-phy-slow-mode;
+ status = "disabled";
+ };
+
+ ap_syscon: system-controller@6f4000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x6f4000 0x2000>;
+
+ ap_clk: clock {
+ compatible = "marvell,ap806-clock";
+ #clock-cells = <1>;
+ };
+
+ ap_pinctrl: pinctrl {
+ compatible = "marvell,ap806-pinctrl";
+
+ uart0_pins: uart0-pins {
+ marvell,pins = "mpp11", "mpp19";
+ marvell,function = "uart0";
+ };
+ };
+
+ ap_gpio: gpio@1040 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x1040>;
+ ngpios = <20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&ap_pinctrl 0 0 20>;
+ };
+ };
+
+ ap_thermal: thermal@6f808c {
+ compatible = "marvell,armada-ap806-thermal";
+ reg = <0x6f808c 0x4>,
+ <0x6f8084 0x8>;
+ };
+ };
+ };
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi
new file mode 100644
index 0000000..8b610fd
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ */
+
+/* Common definitions used by Armada 7K/8K DTs */
+#define PASTER(x, y) x ## y
+#define EVALUATOR(x, y) PASTER(x, y)
+#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
+#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi
new file mode 100644
index 0000000..5e8e524
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi
@@ -0,0 +1,560 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP110.
+ */
+
+#include "armada-common.dtsi"
+
+#define ICU_GRP_NSR 0x0
+#define ICU_GRP_SR 0x1
+#define ICU_GRP_SEI 0x4
+#define ICU_GRP_REI 0x5
+
+#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000))
+#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000))
+#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
+
+/ {
+ /*
+ * The contents of the node are defined below, in order to
+ * save one indentation level
+ */
+ CP110_NAME: CP110_NAME { };
+};
+
+&CP110_NAME {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&CP110_LABEL(icu)>;
+ ranges;
+
+ config-space@CP110_BASE {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
+
+ CP110_LABEL(ethernet): ethernet@0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>;
+ clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
+ <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(core_clk)>,
+ <&CP110_LABEL(core_clk)>;
+ clock-names = "pp_clk", "gop_clk",
+ "mg_clk", "mg_core_clk", "axi_clk";
+ marvell,system-controller = <&CP110_LABEL(syscon0)>;
+ status = "disabled";
+ dma-coherent;
+
+ CP110_LABEL(eth0): eth0 {
+ interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared", "link";
+ port-id = <0>;
+ gop-port-id = <0>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(eth1): eth1 {
+ interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared", "link";
+ port-id = <1>;
+ gop-port-id = <2>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(eth2): eth2 {
+ interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared", "link";
+ port-id = <2>;
+ gop-port-id = <3>;
+ status = "disabled";
+ };
+ };
+
+ CP110_LABEL(comphy): phy@120000 {
+ compatible = "marvell,comphy-cp110";
+ reg = <0x120000 0x6000>;
+ marvell,system-controller = <&CP110_LABEL(syscon0)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CP110_LABEL(comphy0): phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ CP110_LABEL(comphy1): phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ CP110_LABEL(comphy2): phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+
+ CP110_LABEL(comphy3): phy@3 {
+ reg = <3>;
+ #phy-cells = <1>;
+ };
+
+ CP110_LABEL(comphy4): phy@4 {
+ reg = <4>;
+ #phy-cells = <1>;
+ };
+
+ CP110_LABEL(comphy5): phy@5 {
+ reg = <5>;
+ #phy-cells = <1>;
+ };
+ };
+
+ CP110_LABEL(mdio): mdio@12a200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x12a200 0x10>;
+ clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
+ <&CP110_LABEL(core_clk)>, <&CP110_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(xmdio): mdio@12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x10>;
+ clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
+ <&CP110_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(icu): interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x440>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
+
+ CP110_LABEL(rtc): rtc@284000 {
+ compatible = "marvell,armada-8k-rtc";
+ reg = <0x284000 0x20>, <0x284080 0x24>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(thermal): thermal@400078 {
+ compatible = "marvell,armada-cp110-thermal";
+ reg = <0x400078 0x4>,
+ <0x400070 0x8>;
+ };
+
+ CP110_LABEL(syscon0): system-controller@440000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x440000 0x2000>;
+
+ CP110_LABEL(clk): clock {
+ compatible = "marvell,cp110-clock";
+ status = "disabled";
+ #clock-cells = <2>;
+ };
+
+ CP110_LABEL(gpio1): gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(gpio2): gpio@140 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x140>;
+ ngpios = <31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ CP110_LABEL(usb3_0): usb3@500000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x500000 0x4000>;
+ dma-coherent;
+ interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(core_clk)>,
+ <&CP110_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(usb3_1): usb3@510000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x510000 0x4000>;
+ dma-coherent;
+ interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(core_clk)>,
+ <&CP110_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(sata0): sata@540000 {
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
+ reg = <0x540000 0x30000>;
+ dma-coherent;
+ interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(core_clk)>,
+ <&CP110_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(xor0): xor@6a0000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(core_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ };
+
+ CP110_LABEL(xor1): xor@6c0000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(core_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ };
+
+ CP110_LABEL(spi0): spi@700600 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700600 0x50>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clock-names = "core", "axi";
+ clocks = <&CP110_LABEL(slow_io_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(spi1): spi@700680 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700680 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "core", "axi";
+ clocks = <&CP110_LABEL(slow_io_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(i2c0): i2c@701000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(slow_io_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(i2c1): i2c@701100 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(slow_io_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(uart0): serial@702000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702000 0x100>;
+ reg-shift = <2>;
+ interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP110_LABEL(slow_io_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(uart1): serial@702100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702100 0x100>;
+ reg-shift = <2>;
+ interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP110_LABEL(slow_io_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(uart2): serial@702200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702200 0x100>;
+ reg-shift = <2>;
+ interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP110_LABEL(slow_io_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(uart3): serial@702300 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702300 0x100>;
+ reg-shift = <2>;
+ interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP110_LABEL(slow_io_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(nand_controller): nand@720000 {
+ /*
+ * Due to the limitation of the pins available
+ * this controller is only usable on the CPM
+ * for A7K and on the CPS for A8K.
+ */
+ compatible = "marvell,armada-8k-nand-controller",
+ "marvell,armada370-nand-controller";
+ reg = <0x720000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(nand_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ marvell,system-controller = <&CP110_LABEL(syscon0)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(trng): trng@760000 {
+ compatible = "marvell,armada-8k-rng",
+ "inside-secure,safexcel-eip76";
+ reg = <0x760000 0x7d>;
+ interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(x2core_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ status = "okay";
+ };
+
+ CP110_LABEL(sdhci0): sdhci@780000 {
+ compatible = "marvell,armada-cp110-sdhci";
+ reg = <0x780000 0x300>;
+ interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "axi";
+ clocks = <&CP110_LABEL(sdio_clk)>, <&CP110_LABEL(core_clk)>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ CP110_LABEL(crypto): crypto@800000 {
+ compatible = "inside-secure,safexcel-eip197";
+ reg = <0x800000 0x200000>;
+ interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mem", "ring0", "ring1",
+ "ring2", "ring3", "eip";
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(x2core_clk)>,
+ <&CP110_LABEL(x2core_clk)>;
+ dma-coherent;
+ };
+ };
+
+ CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
+ <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* downstream I/O */
+ <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000
+ /* non-prefetchable memory */
+ 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
+ <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* downstream I/O */
+ <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000
+ /* non-prefetchable memory */
+ 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
+ <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* downstream I/O */
+ <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000
+ /* non-prefetchable memory */
+ 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ /* 1 GHz fixed main PLL */
+ CP110_LABEL(mainpll): CP110_LABEL(mainpll) {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ CP110_LABEL(x2core_clk): CP110_LABEL(x2core_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP110_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ CP110_LABEL(core_clk): CP110_LABEL(core_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP110_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ CP110_LABEL(sdio_clk): CP110_LABEL(sdio_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP110_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <2>;
+ clock-div = <5>;
+ };
+
+ CP110_LABEL(nand_clk): CP110_LABEL(nand_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP110_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <2>;
+ clock-div = <5>;
+ };
+
+ CP110_LABEL(ppv2_clk): CP110_LABEL(ppv2_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP110_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <3>;
+ };
+
+ CP110_LABEL(slow_io_clk): CP110_LABEL(slow_io_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP110_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+};
--
2.29.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [edk2-platforms PATCH 1/4] Marvell/Armada7k8k: Remove device tree sources from edk2-platforms
2021-03-18 19:57 [edk2-non-osi/edk2-platforms PATCH 0/4] Marvell SoCs device tree update Marcin Wojtas
2021-03-18 19:57 ` [edk2-non-osi PATCH 2/4] Marvell/Armada7k8k: Move device tree sources from edk2-platforms Marcin Wojtas
@ 2021-03-18 19:57 ` Marcin Wojtas
2021-03-18 19:57 ` [edk2-non-osi PATCH 3/4] Marvell/Armada7k8k: Update device trees Marcin Wojtas
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Marcin Wojtas @ 2021-03-18 19:57 UTC (permalink / raw)
To: devel; +Cc: leif, ard.biesheuvel, mw, jaz, kostap, upstream, jon
edk2-non-osi project is a more proper place for keeping
the device tree sources, so move it there. It is a preparation
for the DT upgrade for the Armada 7k8k SoC family.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Silicon/Marvell/Armada7k8k/DeviceTree/Armada70x0Db.inf | 22 -
Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0Db.inf | 22 -
Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf | 22 -
Silicon/Marvell/Armada7k8k/DeviceTree/armada-7020.dtsi | 16 -
Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts | 267 ----------
Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi | 16 -
Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi | 64 ---
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8020.dtsi | 26 -
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts | 336 ------------
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts | 377 -------------
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi | 25 -
Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi | 108 ----
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi | 31 --
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi | 43 --
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi | 264 ---------
Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi | 10 -
Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi | 560 --------------------
17 files changed, 2209 deletions(-)
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/Armada70x0Db.inf
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0Db.inf
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-7020.dtsi
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-8020.dtsi
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi
delete mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/Armada70x0Db.inf b/Silicon/Marvell/Armada7k8k/DeviceTree/Armada70x0Db.inf
deleted file mode 100644
index b533578a89..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/Armada70x0Db.inf
+++ /dev/null
@@ -1,22 +0,0 @@
-## @file
-#
-# Device tree description of the Marvell Armada 7040 DB platform
-#
-# Copyright (c) 2018, Marvell International Ltd. All rights reserved.
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-##
-
-[Defines]
- INF_VERSION = 0x0001001A
- BASE_NAME = Armada70x0DbDeviceTree
- FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
- MODULE_TYPE = USER_DEFINED
- VERSION_STRING = 1.0
-
-[Sources]
- armada-7040-db.dts
-
-[Packages]
- MdePkg/MdePkg.dec
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0Db.inf b/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0Db.inf
deleted file mode 100644
index 378fad240b..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0Db.inf
+++ /dev/null
@@ -1,22 +0,0 @@
-## @file
-#
-# Device tree description of the Marvell Armada 8040 DB platform
-#
-# Copyright (c) 2018, Marvell International Ltd. All rights reserved.
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-##
-
-[Defines]
- INF_VERSION = 0x0001001A
- BASE_NAME = Armada80x0DbDeviceTree
- FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
- MODULE_TYPE = USER_DEFINED
- VERSION_STRING = 1.0
-
-[Sources]
- armada-8040-db.dts
-
-[Packages]
- MdePkg/MdePkg.dec
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf b/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf
deleted file mode 100644
index 540e1a79f3..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf
+++ /dev/null
@@ -1,22 +0,0 @@
-## @file
-#
-# Device tree description of the Marvell Armada 8040 MacchiatoBin platform
-#
-# Copyright (c) 2018, Marvell International Ltd. All rights reserved.
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-##
-
-[Defines]
- INF_VERSION = 0x0001001A
- BASE_NAME = Armada80x0McBinDeviceTree
- FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
- MODULE_TYPE = USER_DEFINED
- VERSION_STRING = 1.0
-
-[Sources]
- armada-8040-mcbin.dts
-
-[Packages]
- MdePkg/MdePkg.dec
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7020.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7020.dtsi
deleted file mode 100644
index e2edc26271..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7020.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for the Armada 7020 SoC, made of an AP806 Dual and
- * one CP110.
- */
-
-#include "armada-ap806-dual.dtsi"
-#include "armada-70x0.dtsi"
-
-/ {
- model = "Marvell Armada 7020";
- compatible = "marvell,armada7020", "marvell,armada-ap806-dual",
- "marvell,armada-ap806";
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts
deleted file mode 100644
index f5878efc06..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts
+++ /dev/null
@@ -1,267 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for Marvell Armada 7040 Development board platform
- */
-
-#include "armada-7040.dtsi"
-
-#define GPIO_ACTIVE_HIGH 0
-#define GPIO_ACTIVE_LOW 1
-
-/ {
- model = "Marvell Armada 7040 DB board";
- compatible = "marvell,armada7040-db", "marvell,armada7040",
- "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- aliases {
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- };
-
- cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb3h0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
- };
-
- cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb3h1-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
- };
-
- cp0_usb3_0_phy: cp0-usb3-0-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_0_vbus>;
- };
-
- cp0_usb3_1_phy: cp0-usb3-1-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_1_vbus>;
- };
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&spi0 {
- status = "okay";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@400000 {
- label = "Filesystem";
- reg = <0x200000 0xce0000>;
- };
- };
- };
-};
-
-&uart0 {
- status = "okay";
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-
-&cp0_pcie2 {
- status = "okay";
-};
-
-&cp0_i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-
- expander0: pca9555@21 {
- compatible = "nxp,pca9555";
- pinctrl-names = "default";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x21>;
- /*
- * IO0_0: USB3_PWR_EN0 IO1_0: USB_3_1_Dev_Detect
- * IO0_1: USB3_PWR_EN1 IO1_1: USB2_1_current_limit
- * IO0_2: DDR3_4_Detect IO1_2: Hcon_IO_RstN
- * IO0_3: USB2_DEVICE_DETECT
- * IO0_4: GPIO_0 IO1_4: SD_Status
- * IO0_5: GPIO_1 IO1_5: LDO_5V_Enable
- * IO0_6: IHB_5V_Enable IO1_6: PWR_EN_eMMC
- * IO0_7: IO1_7: SDIO_Vcntrl
- */
- };
-};
-
-&cp0_nand_controller {
- /*
- * SPI on CPM and NAND have common pins on this board. We can
- * use only one at a time. To enable the NAND (which will
- * disable the SPI), the "status = "okay";" line have to be
- * added here.
- */
- pinctrl-0 = <&nand_pins>, <&nand_rb>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
-
- partition@200000 {
- label = "Linux";
- reg = <0x200000 0xe00000>;
- };
-
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
-
- };
- };
-};
-
-&cp0_spi1 {
- status = "disabled";
-
- spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-max-frequency = <20000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x200000>;
- };
-
- partition@400000 {
- label = "Filesystem";
- reg = <0x200000 0xe00000>;
- };
- };
- };
-};
-
-&cp0_sata0 {
- status = "okay";
-};
-
-&cp0_usb3_0 {
- usb-phy = <&cp0_usb3_0_phy>;
- status = "okay";
-};
-
-&cp0_usb3_1 {
- usb-phy = <&cp0_usb3_1_phy>;
- status = "okay";
-};
-
-&ap_sdhci0 {
- status = "okay";
- bus-width = <4>;
- no-1-8-v;
- non-removable;
-};
-
-&cp0_sdhci0 {
- status = "okay";
- bus-width = <4>;
- no-1-8-v;
- cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>;
-};
-
-&cp0_mdio {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-&cp0_eth0 {
- status = "okay";
- /* Network PHY */
- phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp0_comphy2 0>;
-
- fixed-link {
- speed = <10000>;
- full-duplex;
- };
-};
-
-&cp0_eth1 {
- status = "okay";
- /* Network PHY */
- phy = <&phy0>;
- phy-mode = "sgmii";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp0_comphy0 1>;
-};
-
-&cp0_eth2 {
- status = "okay";
- phy = <&phy1>;
- phy-mode = "rgmii-id";
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi
deleted file mode 100644
index 03109b2bb7..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and
- * one CP110.
- */
-
-#include "armada-ap806-quad.dtsi"
-#include "armada-70x0.dtsi"
-
-/ {
- model = "Marvell Armada 7040";
- compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
- "marvell,armada-ap806";
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi
deleted file mode 100644
index 78f9d874c6..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2017 Marvell Technology Group Ltd.
- *
- * Device Tree file for the Armada 70x0 SoC
- */
-
-/ {
- aliases {
- gpio1 = &cp0_gpio1;
- gpio2 = &cp0_gpio2;
- spi1 = &cp0_spi0;
- spi2 = &cp0_spi1;
- };
-};
-
-/*
- * Instantiate the CP110
- */
-#define CP110_NAME cp0
-#define CP110_BASE f2000000
-#define CP110_PCIE_IO_BASE 0xf9000000
-#define CP110_PCIE_MEM_BASE 0xf6000000
-#define CP110_PCIE0_BASE f2600000
-#define CP110_PCIE1_BASE f2620000
-#define CP110_PCIE2_BASE f2640000
-
-#include "armada-cp110.dtsi"
-
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
-
-&cp0_gpio1 {
- status = "okay";
-};
-
-&cp0_gpio2 {
- status = "okay";
-};
-
-&cp0_syscon0 {
- cp0_pinctrl: pinctrl {
- compatible = "marvell,armada-7k-pinctrl";
-
- nand_pins: nand-pins {
- marvell,pins =
- "mpp15", "mpp16", "mpp17", "mpp18",
- "mpp19", "mpp20", "mpp21", "mpp22",
- "mpp23", "mpp24", "mpp25", "mpp26",
- "mpp27";
- marvell,function = "dev";
- };
-
- nand_rb: nand-rb {
- marvell,pins = "mpp13";
- marvell,function = "nf";
- };
- };
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8020.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8020.dtsi
deleted file mode 100644
index 5d763450c5..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8020.dtsi
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and
- * two CP110.
- */
-
-#include "armada-ap806-dual.dtsi"
-#include "armada-80x0.dtsi"
-
-/ {
- model = "Marvell Armada 8020";
- compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
- "marvell,armada-ap806";
-};
-
-/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
- * in CP master is not connected (by package) to the oscillator. So
- * disable it. However, the RTC clock in CP slave is connected to the
- * oscillator so this one is let enabled.
- */
-
-&cp0_rtc {
- status = "disabled";
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts
deleted file mode 100644
index e81392241c..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts
+++ /dev/null
@@ -1,336 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for Marvell Armada 8040 Development board platform
- */
-
-#include "armada-8040.dtsi"
-
-#define GPIO_ACTIVE_HIGH 0
-#define GPIO_ACTIVE_LOW 1
-
-/ {
- model = "Marvell Armada 8040 DB board";
- compatible = "marvell,armada8040-db", "marvell,armada8040",
- "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- aliases {
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth2;
- ethernet2 = &cp1_eth0;
- ethernet3 = &cp1_eth1;
- };
-
- cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
- compatible = "regulator-fixed";
- regulator-name = "cp0-usb3h0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
- };
-
- cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
- compatible = "regulator-fixed";
- regulator-name = "cp0-usb3h1-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
- };
-
- cp0_usb3_0_phy: cp0-usb3-0-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_0_vbus>;
- };
-
- cp0_usb3_1_phy: cp0-usb3-1-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_1_vbus>;
- };
-
- cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
- compatible = "regulator-fixed";
- regulator-name = "cp1-usb3h0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
- };
-
- cp1_usb3_0_phy: cp1-usb3-0-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp1_reg_usb3_0_vbus>;
- };
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&spi0 {
- status = "okay";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@400000 {
- label = "Filesystem";
- reg = <0x200000 0xce0000>;
- };
- };
- };
-};
-
-/* Accessible over the mini-USB CON9 connector on the main board */
-&uart0 {
- status = "okay";
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-/* CON6 on CP0 expansion */
-&cp0_pcie0 {
- status = "okay";
-};
-
-/* CON5 on CP0 expansion */
-&cp0_pcie2 {
- status = "okay";
-};
-
-&cp0_i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-
- /* U31 */
- expander0: pca9555@21 {
- compatible = "nxp,pca9555";
- pinctrl-names = "default";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x21>;
- };
-
- /* U25 */
- expander1: pca9555@25 {
- compatible = "nxp,pca9555";
- pinctrl-names = "default";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x25>;
- };
-
-};
-
-/* CON4 on CP0 expansion */
-&cp0_sata0 {
- status = "okay";
-};
-
-/* CON9 on CP0 expansion */
-&cp0_usb3_0 {
- usb-phy = <&cp0_usb3_0_phy>;
- status = "okay";
-};
-
-/* CON10 on CP0 expansion */
-&cp0_usb3_1 {
- usb-phy = <&cp0_usb3_1_phy>;
- status = "okay";
-};
-
-&cp0_mdio {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-&cp0_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
-
- fixed-link {
- speed = <10000>;
- full-duplex;
- };
-};
-
-&cp0_eth2 {
- status = "okay";
- phy = <&phy1>;
- phy-mode = "rgmii-id";
-};
-
-/* CON6 on CP1 expansion */
-&cp1_pcie0 {
- status = "okay";
-};
-
-/* CON7 on CP1 expansion */
-&cp1_pcie1 {
- status = "okay";
-};
-
-/* CON5 on CP1 expansion */
-&cp1_pcie2 {
- status = "okay";
-};
-
-&cp1_i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&cp1_spi1 {
- status = "disabled";
-
- spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-max-frequency = <20000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "Boot";
- reg = <0x0 0x200000>;
- };
- partition@200000 {
- label = "Filesystem";
- reg = <0x200000 0xd00000>;
- };
- partition@f00000 {
- label = "Boot_2nd";
- reg = <0xf00000 0x100000>;
- };
- };
- };
-};
-
-/*
- * Proper NAND usage will require DPR-76 to be in position 1-2, which disables
- * MDIO signal of CP1.
- */
-&cp1_nand_controller {
- pinctrl-0 = <&nand_pins>, <&nand_rb>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- nand-rb = <0>;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@200000 {
- label = "Linux";
- reg = <0x200000 0xe00000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
- };
-};
-
-/* CON4 on CP1 expansion */
-&cp1_sata0 {
- status = "okay";
-};
-
-/* CON9 on CP1 expansion */
-&cp1_usb3_0 {
- usb-phy = <&cp1_usb3_0_phy>;
- status = "okay";
-};
-
-/* CON10 on CP1 expansion */
-&cp1_usb3_1 {
- status = "okay";
-};
-
-&cp1_mdio {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&cp1_ethernet {
- status = "okay";
-};
-
-&cp1_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
-
- fixed-link {
- speed = <10000>;
- full-duplex;
- };
-};
-
-&cp1_eth1 {
- status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
-};
-
-&ap_sdhci0 {
- status = "okay";
- bus-width = <4>;
- non-removable;
-};
-
-&cp0_sdhci0 {
- status = "okay";
- bus-width = <8>;
- non-removable;
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
deleted file mode 100644
index d9c9348b53..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
+++ /dev/null
@@ -1,377 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for MACCHIATOBin Armada 8040 community board platform
- */
-
-#include "armada-8040.dtsi"
-
-#define GPIO_ACTIVE_HIGH 0
-#define GPIO_ACTIVE_LOW 1
-
-/ {
- model = "Marvell 8040 MACCHIATOBin";
- compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
- "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- aliases {
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp1_eth0;
- ethernet2 = &cp1_eth1;
- ethernet3 = &cp1_eth2;
- };
-
- /* Regulator labels correspond with schematics */
- v_3_3: regulator-3-3v {
- compatible = "regulator-fixed";
- regulator-name = "v_3_3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- status = "okay";
- };
-
- v_vddo_h: regulator-1-8v {
- compatible = "regulator-fixed";
- regulator-name = "v_vddo_h";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- status = "okay";
- };
-
- v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_xhci_vbus_pins>;
- regulator-name = "v_5v0_usb3_hst_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- status = "okay";
- };
-
- usb3h0_phy: usb3_phy0 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&v_5v0_usb3_hst_vbus>;
- };
-
- sfp_eth0: sfp-eth0 {
- /* CON15,16 - CPM lane 4 */
- compatible = "sff,sfp";
- i2c-bus = <&sfpp0_i2c>;
- los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_sfpp0_pins>;
- };
-
- sfp_eth1: sfp-eth1 {
- /* CON17,18 - CPS lane 4 */
- compatible = "sff,sfp";
- i2c-bus = <&sfpp1_i2c>;
- los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
- };
-
- sfp_eth3: sfp-eth3 {
- /* CON3,4 - CPS lane 5 */
- compatible = "sff,sfp";
- i2c-bus = <&sfp_1g_i2c>;
- los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
- };
-};
-
-&uart0 {
- status = "okay";
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-&ap_sdhci0 {
- bus-width = <8>;
- /*
- * Not stable in HS modes - phy needs "more calibration", so add
- * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
- */
- marvell,xenon-phy-slow-mode;
- no-1-8-v;
- no-sd;
- no-sdio;
- non-removable;
- status = "okay";
- vqmmc-supply = <&v_vddo_h>;
-};
-
-&cp0_i2c0 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- status = "okay";
-};
-
-&cp0_i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c1_pins>;
- status = "okay";
-
- i2c-switch@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
-
- sfpp0_i2c: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
- sfpp1_i2c: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
- sfp_1g_i2c: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
- };
-};
-
-/* J25 UART header */
-&cp0_uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_uart1_pins>;
- status = "okay";
-};
-
-&cp0_mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_ge_mdio_pins>;
- status = "okay";
-
- ge_phy: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&cp0_pcie0 {
- compatible = "marvell,armada8k-pcie-ecam", "snps,dw-pcie-ecam";
- reg = <0 0xe0000000 0 0xff00000>;
- bus-range = <0 0xfe>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_pcie_pins>;
- num-lanes = <4>;
- num-viewport = <8>;
- reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
- ranges = <0x1000000 0x0 0x00000000 0x0 0xeff00000 0x0 0x00010000>,
- <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>,
- <0x3000000 0x8 0x00000000 0x8 0x00000000 0x1 0x00000000>;
- status = "okay";
-};
-
-&cp0_pinctrl {
- cp0_ge_mdio_pins: ge-mdio-pins {
- marvell,pins = "mpp32", "mpp34";
- marvell,function = "ge";
- };
- cp0_i2c1_pins: i2c1-pins {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
- cp0_i2c0_pins: i2c0-pins {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp0_uart1_pins: uart1-pins {
- marvell,pins = "mpp40", "mpp41";
- marvell,function = "uart1";
- };
- cp0_xhci_vbus_pins: xhci0-vbus-pins {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- cp0_sfp_1g_pins: sfp-1g-pins {
- marvell,pins = "mpp51", "mpp53", "mpp54";
- marvell,function = "gpio";
- };
- cp0_pcie_pins: pcie-pins {
- marvell,pins = "mpp52";
- marvell,function = "gpio";
- };
- cp0_sdhci_pins: sdhci-pins {
- marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
- "mpp60", "mpp61";
- marvell,function = "sdio";
- };
- cp0_sfpp1_pins: sfpp1-pins {
- marvell,pins = "mpp62";
- marvell,function = "gpio";
- };
-};
-
-&cp0_xmdio {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- sfp = <&sfp_eth0>;
- };
-
- phy8: ethernet-phy@8 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <8>;
- sfp = <&sfp_eth1>;
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-&cp0_eth0 {
- status = "okay";
- /* Network PHY */
- phy = <&phy0>;
- phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp0_comphy4 0>;
-};
-
-&cp0_sata0 {
- /* CPM Lane 0 - U29 */
- status = "okay";
-};
-
-&cp0_sdhci0 {
- /* U6 */
- broken-cd;
- bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_sdhci_pins>;
- status = "okay";
- vqmmc-supply = <&v_3_3>;
-};
-
-&cp0_usb3_0 {
- /* J38? - USB2.0 only */
- status = "okay";
-};
-
-&cp0_usb3_1 {
- /* J38? - USB2.0 only */
- status = "okay";
-};
-
-&cp1_ethernet {
- status = "okay";
-};
-
-&cp1_eth0 {
- status = "okay";
- /* Network PHY */
- phy = <&phy8>;
- phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy4 0>;
-};
-
-&cp1_eth1 {
- /* CPS Lane 0 - J5 (Gigabit RJ45) */
- status = "okay";
- /* Network PHY */
- phy = <&ge_phy>;
- phy-mode = "sgmii";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy0 1>;
-};
-
-&cp1_eth2 {
- /* CPS Lane 5 */
- status = "okay";
- /* Network PHY */
- phy-mode = "2500base-x";
- managed = "in-band-status";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy5 2>;
- sfp = <&sfp_eth3>;
-};
-
-&cp1_pinctrl {
- cp1_sfpp1_pins: sfpp1-pins {
- marvell,pins = "mpp8", "mpp10", "mpp11";
- marvell,function = "gpio";
- };
- cp1_spi1_pins: spi1-pins {
- marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- cp1_uart0_pins: uart0-pins {
- marvell,pins = "mpp6", "mpp7";
- marvell,function = "uart0";
- };
- cp1_sfp_1g_pins: sfp-1g-pins {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
- cp1_sfpp0_pins: sfpp0-pins {
- marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
- marvell,function = "gpio";
- };
-};
-
-/* J27 UART header */
-&cp1_uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_uart0_pins>;
- status = "okay";
-};
-
-&cp1_sata0 {
- /* CPS Lane 1 - U32 */
- /* CPS Lane 3 - U31 */
- status = "okay";
-};
-
-&cp1_spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_spi1_pins>;
- status = "disabled";
-
- spi-flash@0 {
- compatible = "st,w25q32";
- spi-max-frequency = <50000000>;
- reg = <0>;
- };
-};
-
-&cp1_usb3_0 {
- /* CPS Lane 2 - CON7 */
- usb-phy = <&usb3h0_phy>;
- status = "okay";
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi
deleted file mode 100644
index 784ef3f311..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and
- * two CP110.
- */
-
-#include "armada-ap806-quad.dtsi"
-#include "armada-80x0.dtsi"
-
-/ {
- model = "Marvell Armada 8040";
- compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
- "marvell,armada-ap806";
-};
-
-/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
- * in CP master is not connected (by package) to the oscillator. So
- * disable it. However, the RTC clock in CP slave is connected to the
- * oscillator so this one is let enabled.
- */
-&cp0_rtc {
- status = "disabled";
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi
deleted file mode 100644
index 81967e20d3..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2017 Marvell Technology Group Ltd.
- *
- * Device Tree file for the Armada 80x0 SoC family
- */
-
-/ {
- aliases {
- gpio1 = &cp1_gpio1;
- gpio2 = &cp0_gpio2;
- spi1 = &cp0_spi0;
- spi2 = &cp0_spi1;
- spi3 = &cp1_spi0;
- spi4 = &cp1_spi1;
- };
-};
-
-/*
- * Instantiate the master CP110
- */
-#define CP110_NAME cp0
-#define CP110_BASE f2000000
-#define CP110_PCIE_IO_BASE 0xf9000000
-#define CP110_PCIE_MEM_BASE 0xf6000000
-#define CP110_PCIE0_BASE f2600000
-#define CP110_PCIE1_BASE f2620000
-#define CP110_PCIE2_BASE f2640000
-
-#include "armada-cp110.dtsi"
-
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
-
-/*
- * Instantiate the slave CP110
- */
-#define CP110_NAME cp1
-#define CP110_BASE f4000000
-#define CP110_PCIE_IO_BASE 0xfd000000
-#define CP110_PCIE_MEM_BASE 0xfa000000
-#define CP110_PCIE0_BASE f4600000
-#define CP110_PCIE1_BASE f4620000
-#define CP110_PCIE2_BASE f4640000
-
-#include "armada-cp110.dtsi"
-
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
-
-/* The 80x0 has two CP blocks, but uses only one block from each. */
-&cp1_gpio1 {
- status = "okay";
-};
-
-&cp0_gpio2 {
- status = "okay";
-};
-
-&cp0_syscon0 {
- cp0_pinctrl: pinctrl {
- compatible = "marvell,armada-8k-cpm-pinctrl";
- };
-};
-
-&cp1_syscon0 {
- cp1_pinctrl: pinctrl {
- compatible = "marvell,armada-8k-cps-pinctrl";
-
- nand_pins: nand-pins {
- marvell,pins =
- "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp6", "mpp7",
- "mpp8", "mpp9", "mpp10", "mpp11",
- "mpp15", "mpp16", "mpp17", "mpp18",
- "mpp19", "mpp20", "mpp21", "mpp22",
- "mpp23", "mpp24", "mpp25", "mpp26",
- "mpp27";
- marvell,function = "dev";
- };
-
- nand_rb: nand-rb {
- marvell,pins = "mpp13", "mpp12";
- marvell,function = "nf";
- };
- };
-};
-
-&cp1_crypto {
- /*
- * The cryptographic engine found on the cp110
- * master is enabled by default at the SoC
- * level. Because it is not possible as of now
- * to enable two cryptographic engines in
- * parallel, disable this one by default.
- */
- status = "disabled";
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi
deleted file mode 100644
index 5985843fcc..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for Marvell Armada AP806.
- */
-
-#include "armada-ap806.dtsi"
-
-/ {
- model = "Marvell Armada AP806 Dual";
- compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x000>;
- enable-method = "psci";
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x001>;
- enable-method = "psci";
- };
- };
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi
deleted file mode 100644
index bae0ed9ca7..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for Marvell Armada AP806.
- */
-
-#include "armada-ap806.dtsi"
-
-/ {
- model = "Marvell Armada AP806 Quad";
- compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x000>;
- enable-method = "psci";
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x001>;
- enable-method = "psci";
- };
- cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x100>;
- enable-method = "psci";
- };
- cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x101>;
- enable-method = "psci";
- };
- };
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi
deleted file mode 100644
index 66124bf483..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for Marvell Armada AP806.
- */
-
-#define IRQ_TYPE_LEVEL_HIGH (1 << 2)
-#define IRQ_TYPE_LEVEL_LOW (1 << 3)
-
-#define GIC_SPI 0
-#define GIC_PPI 1
-
-#define GIC_CPU_MASK_RAW(x) ((x) << 8)
-#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
-
-/dts-v1/;
-
-/ {
- model = "Marvell Armada AP806";
- compatible = "marvell,armada-ap806";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- gpio0 = &ap_gpio;
- spi0 = &spi0;
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- ap806 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- config-space@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x0 0xf0000000 0x1000000>;
-
- gic: interrupt-controller@210000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x210000 0x10000>,
- <0x220000 0x20000>,
- <0x240000 0x20000>,
- <0x260000 0x20000>;
-
- gic_v2m0: v2m@280000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x280000 0x1000>;
- arm,msi-base-spi = <160>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m1: v2m@290000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x290000 0x1000>;
- arm,msi-base-spi = <192>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m2: v2m@2a0000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x2a0000 0x1000>;
- arm,msi-base-spi = <224>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m3: v2m@2b0000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x2b0000 0x1000>;
- arm,msi-base-spi = <256>;
- arm,msi-num-spis = <32>;
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu {
- compatible = "arm,cortex-a72-pmu";
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
-
- odmi: odmi@300000 {
- compatible = "marvell,odmi-controller";
- interrupt-controller;
- msi-controller;
- marvell,odmi-frames = <4>;
- reg = <0x300000 0x4000>,
- <0x304000 0x4000>,
- <0x308000 0x4000>,
- <0x30C000 0x4000>;
- marvell,spi-base = <128>, <136>, <144>, <152>;
- };
-
- gicp: gicp@3f0040 {
- compatible = "marvell,ap806-gicp";
- reg = <0x3f0040 0x10>;
- marvell,spi-ranges = <64 64>, <288 64>;
- msi-controller;
- };
-
- pic: interrupt-controller@3f0100 {
- compatible = "marvell,armada-8k-pic";
- reg = <0x3f0100 0x10>;
- #interrupt-cells = <1>;
- interrupt-controller;
- interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- xor@400000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x400000 0x1000>,
- <0x410000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- xor@420000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x420000 0x1000>,
- <0x430000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- xor@440000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x440000 0x1000>,
- <0x450000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- xor@460000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x460000 0x1000>,
- <0x470000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- spi0: spi@510600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x510600 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ap_clk 3>;
- status = "disabled";
- };
-
- i2c0: i2c@511000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x511000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- timeout-ms = <1000>;
- clocks = <&ap_clk 3>;
- status = "disabled";
- };
-
- uart0: serial@512000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x512000 0x100>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clocks = <&ap_clk 3>;
- status = "disabled";
- };
-
- uart1: serial@512100 {
- compatible = "snps,dw-apb-uart";
- reg = <0x512100 0x100>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clocks = <&ap_clk 3>;
- status = "disabled";
-
- };
-
- watchdog: watchdog@610000 {
- compatible = "arm,sbsa-gwdt";
- reg = <0x610000 0x1000>, <0x600000 0x1000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- ap_sdhci0: sdhci@6e0000 {
- compatible = "marvell,armada-ap806-sdhci";
- reg = <0x6e0000 0x300>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core";
- clocks = <&ap_clk 4>;
- dma-coherent;
- marvell,xenon-phy-slow-mode;
- status = "disabled";
- };
-
- ap_syscon: system-controller@6f4000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x6f4000 0x2000>;
-
- ap_clk: clock {
- compatible = "marvell,ap806-clock";
- #clock-cells = <1>;
- };
-
- ap_pinctrl: pinctrl {
- compatible = "marvell,ap806-pinctrl";
-
- uart0_pins: uart0-pins {
- marvell,pins = "mpp11", "mpp19";
- marvell,function = "uart0";
- };
- };
-
- ap_gpio: gpio@1040 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x1040>;
- ngpios = <20>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&ap_pinctrl 0 0 20>;
- };
- };
-
- ap_thermal: thermal@6f808c {
- compatible = "marvell,armada-ap806-thermal";
- reg = <0x6f808c 0x4>,
- <0x6f8084 0x8>;
- };
- };
- };
-};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi
deleted file mode 100644
index 8b610fd2b3..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi
+++ /dev/null
@@ -1,10 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- */
-
-/* Common definitions used by Armada 7K/8K DTs */
-#define PASTER(x, y) x ## y
-#define EVALUATOR(x, y) PASTER(x, y)
-#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
-#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi
deleted file mode 100644
index 5e8e524cf7..0000000000
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi
+++ /dev/null
@@ -1,560 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for Marvell Armada CP110.
- */
-
-#include "armada-common.dtsi"
-
-#define ICU_GRP_NSR 0x0
-#define ICU_GRP_SR 0x1
-#define ICU_GRP_SEI 0x4
-#define ICU_GRP_REI 0x5
-
-#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000))
-#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000))
-#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
-
-/ {
- /*
- * The contents of the node are defined below, in order to
- * save one indentation level
- */
- CP110_NAME: CP110_NAME { };
-};
-
-&CP110_NAME {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&CP110_LABEL(icu)>;
- ranges;
-
- config-space@CP110_BASE {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
-
- CP110_LABEL(ethernet): ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
- <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- clock-names = "pp_clk", "gop_clk",
- "mg_clk", "mg_core_clk", "axi_clk";
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- status = "disabled";
- dma-coherent;
-
- CP110_LABEL(eth0): eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <0>;
- gop-port-id = <0>;
- status = "disabled";
- };
-
- CP110_LABEL(eth1): eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <1>;
- gop-port-id = <2>;
- status = "disabled";
- };
-
- CP110_LABEL(eth2): eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <2>;
- gop-port-id = <3>;
- status = "disabled";
- };
- };
-
- CP110_LABEL(comphy): phy@120000 {
- compatible = "marvell,comphy-cp110";
- reg = <0x120000 0x6000>;
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- CP110_LABEL(comphy0): phy@0 {
- reg = <0>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy1): phy@1 {
- reg = <1>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy2): phy@2 {
- reg = <2>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy3): phy@3 {
- reg = <3>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy4): phy@4 {
- reg = <4>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy5): phy@5 {
- reg = <5>;
- #phy-cells = <1>;
- };
- };
-
- CP110_LABEL(mdio): mdio@12a200 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
- reg = <0x12a200 0x10>;
- clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
- <&CP110_LABEL(core_clk)>, <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(xmdio): mdio@12a600 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,xmdio";
- reg = <0x12a600 0x10>;
- clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(icu): interrupt-controller@1e0000 {
- compatible = "marvell,cp110-icu";
- reg = <0x1e0000 0x440>;
- #interrupt-cells = <3>;
- interrupt-controller;
- msi-parent = <&gicp>;
- };
-
- CP110_LABEL(rtc): rtc@284000 {
- compatible = "marvell,armada-8k-rtc";
- reg = <0x284000 0x20>, <0x284080 0x24>;
- reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- CP110_LABEL(thermal): thermal@400078 {
- compatible = "marvell,armada-cp110-thermal";
- reg = <0x400078 0x4>,
- <0x400070 0x8>;
- };
-
- CP110_LABEL(syscon0): system-controller@440000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x440000 0x2000>;
-
- CP110_LABEL(clk): clock {
- compatible = "marvell,cp110-clock";
- status = "disabled";
- #clock-cells = <2>;
- };
-
- CP110_LABEL(gpio1): gpio@100 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x100>;
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
- interrupt-controller;
- interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- CP110_LABEL(gpio2): gpio@140 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x140>;
- ngpios = <31>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
- interrupt-controller;
- interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
- };
-
- CP110_LABEL(usb3_0): usb3@500000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x500000 0x4000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(usb3_1): usb3@510000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x510000 0x4000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(sata0): sata@540000 {
- compatible = "marvell,armada-8k-ahci",
- "generic-ahci";
- reg = <0x540000 0x30000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(xor0): xor@6a0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- };
-
- CP110_LABEL(xor1): xor@6c0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- };
-
- CP110_LABEL(spi0): spi@700600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700600 0x50>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(spi1): spi@700680 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700680 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(i2c0): i2c@701000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(i2c1): i2c@701100 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701100 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart0): serial@702000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702000 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart1): serial@702100 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702100 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart2): serial@702200 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702200 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart3): serial@702300 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702300 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(nand_controller): nand@720000 {
- /*
- * Due to the limitation of the pins available
- * this controller is only usable on the CPM
- * for A7K and on the CPS for A8K.
- */
- compatible = "marvell,armada-8k-nand-controller",
- "marvell,armada370-nand-controller";
- reg = <0x720000 0x54>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(nand_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- status = "disabled";
- };
-
- CP110_LABEL(trng): trng@760000 {
- compatible = "marvell,armada-8k-rng",
- "inside-secure,safexcel-eip76";
- reg = <0x760000 0x7d>;
- interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(x2core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "okay";
- };
-
- CP110_LABEL(sdhci0): sdhci@780000 {
- compatible = "marvell,armada-cp110-sdhci";
- reg = <0x780000 0x300>;
- interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(sdio_clk)>, <&CP110_LABEL(core_clk)>;
- dma-coherent;
- status = "disabled";
- };
-
- CP110_LABEL(crypto): crypto@800000 {
- compatible = "inside-secure,safexcel-eip197";
- reg = <0x800000 0x200000>;
- interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mem", "ring0", "ring1",
- "ring2", "ring3", "eip";
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(x2core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- dma-coherent;
- };
- };
-
- CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- /* 1 GHz fixed main PLL */
- CP110_LABEL(mainpll): CP110_LABEL(mainpll) {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000000>;
- };
-
- CP110_LABEL(x2core_clk): CP110_LABEL(x2core_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <2>;
- };
-
- CP110_LABEL(core_clk): CP110_LABEL(core_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <2>;
- };
-
- CP110_LABEL(sdio_clk): CP110_LABEL(sdio_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <2>;
- clock-div = <5>;
- };
-
- CP110_LABEL(nand_clk): CP110_LABEL(nand_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <2>;
- clock-div = <5>;
- };
-
- CP110_LABEL(ppv2_clk): CP110_LABEL(ppv2_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <3>;
- };
-
- CP110_LABEL(slow_io_clk): CP110_LABEL(slow_io_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <4>;
- };
-};
--
2.29.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [edk2-non-osi PATCH 3/4] Marvell/Armada7k8k: Update device trees
2021-03-18 19:57 [edk2-non-osi/edk2-platforms PATCH 0/4] Marvell SoCs device tree update Marcin Wojtas
2021-03-18 19:57 ` [edk2-non-osi PATCH 2/4] Marvell/Armada7k8k: Move device tree sources from edk2-platforms Marcin Wojtas
2021-03-18 19:57 ` [edk2-platforms PATCH 1/4] Marvell/Armada7k8k: Remove " Marcin Wojtas
@ 2021-03-18 19:57 ` Marcin Wojtas
2021-03-18 19:57 ` [edk2-non-osi PATCH 4/4] Marvell/OcteonTx: " Marcin Wojtas
2021-04-15 19:00 ` [edk2-devel] [edk2-non-osi/edk2-platforms PATCH 0/4] Marvell SoCs device tree update Ard Biesheuvel
4 siblings, 0 replies; 7+ messages in thread
From: Marcin Wojtas @ 2021-03-18 19:57 UTC (permalink / raw)
To: devel; +Cc: leif, ard.biesheuvel, mw, jaz, kostap, upstream, jon
This patch updates the Armada7k8k device trees to the version
found in Linux v5.11. All previous modifications, compared
to vanilla files, are kept, i.e. disabled SPI flashes & RTC,
fixed clock tree and generic PCIE for MacchiatoBin board.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts | 72 ++-
Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi | 24 +
Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi | 28 +-
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts | 57 +-
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts | 344 +----------
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dtsi | 374 ++++++++++++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi | 36 ++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi | 56 +-
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi | 38 +-
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi | 66 ++-
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi | 262 +-------
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap807-quad.dtsi | 93 +++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap807.dtsi | 33 ++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap80x.dtsi | 470 +++++++++++++++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi | 3 +-
Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi | 556 +----------------
Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp115.dtsi | 12 +
Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp11x.dtsi | 627 ++++++++++++++++++++
18 files changed, 1921 insertions(+), 1230 deletions(-)
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap807-quad.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap807.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap80x.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp115.dtsi
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp11x.dtsi
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts
index f5878ef..a578b5a 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040-db.dts
@@ -7,9 +7,6 @@
#include "armada-7040.dtsi"
-#define GPIO_ACTIVE_HIGH 0
-#define GPIO_ACTIVE_LOW 1
-
/ {
model = "Marvell Armada 7040 DB board";
compatible = "marvell,armada7040-db", "marvell,armada7040",
@@ -30,6 +27,32 @@
ethernet2 = &cp0_eth2;
};
+ cp0_exp_usb3_0_current_regulator: gpio-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "cp0-usb3-0-current-regulator";
+ regulator-type = "current";
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <900000>;
+ gpios = <&expander0 4 GPIO_ACTIVE_HIGH>;
+ states = <500000 0x0
+ 900000 0x1>;
+ enable-active-high;
+ gpios-states = <0>;
+ };
+
+ cp0_exp_usb3_1_current_regulator: gpio-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "cp0-usb3-1-current-regulator";
+ regulator-type = "current";
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <900000>;
+ gpios = <&expander0 5 GPIO_ACTIVE_HIGH>;
+ states = <500000 0x0
+ 900000 0x1>;
+ enable-active-high;
+ gpios-states = <0>;
+ };
+
cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3h0-vbus";
@@ -37,6 +60,7 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&cp0_exp_usb3_0_current_regulator>;
};
cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
@@ -46,16 +70,7 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
- };
-
- cp0_usb3_0_phy: cp0-usb3-0-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_0_vbus>;
- };
-
- cp0_usb3_1_phy: cp0-usb3-1-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_1_vbus>;
+ vin-supply = <&cp0_exp_usb3_1_current_regulator>;
};
};
@@ -68,8 +83,6 @@
status = "okay";
spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
@@ -100,6 +113,8 @@
&cp0_pcie2 {
status = "okay";
+ phys = <&cp0_comphy5 2>;
+ phy-names = "cp0-pcie2-x1-phy";
};
&cp0_i2c0 {
@@ -171,8 +186,6 @@
status = "disabled";
spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <20000000>;
@@ -197,15 +210,36 @@
&cp0_sata0 {
status = "okay";
+
+ sata-port@1 {
+ phys = <&cp0_comphy3 1>;
+ phy-names = "cp0-sata0-1-phy";
+ };
+};
+
+&cp0_comphy1 {
+ cp0_usbh0_con: connector {
+ compatible = "usb-a-connector";
+ phy-supply = <&cp0_reg_usb3_0_vbus>;
+ };
};
&cp0_usb3_0 {
- usb-phy = <&cp0_usb3_0_phy>;
+ phys = <&cp0_comphy1 0>;
+ phy-names = "cp0-usb3h0-comphy";
status = "okay";
};
+&cp0_comphy4 {
+ cp0_usbh1_con: connector {
+ compatible = "usb-a-connector";
+ phy-supply = <&cp0_reg_usb3_1_vbus>;
+ };
+};
+
&cp0_usb3_1 {
- usb-phy = <&cp0_usb3_1_phy>;
+ phys = <&cp0_comphy4 1>;
+ phy-names = "cp0-usb3h1-comphy";
status = "okay";
};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi
index 03109b2..30c2e4e 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-7040.dtsi
@@ -14,3 +14,27 @@
compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
"marvell,armada-ap806";
};
+
+&cp0_pcie0 {
+ iommu-map =
+ <0x0 &smmu 0x480 0x20>,
+ <0x100 &smmu 0x4a0 0x20>,
+ <0x200 &smmu 0x4c0 0x20>;
+ iommu-map-mask = <0x031f>;
+};
+
+&cp0_sata0 {
+ iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+ iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+ iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+ iommus = <&smmu 0x441>;
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi
index 78f9d87..0fdcb35 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-70x0.dtsi
@@ -17,23 +17,23 @@
/*
* Instantiate the CP110
*/
-#define CP110_NAME cp0
-#define CP110_BASE f2000000
-#define CP110_PCIE_IO_BASE 0xf9000000
-#define CP110_PCIE_MEM_BASE 0xf6000000
-#define CP110_PCIE0_BASE f2600000
-#define CP110_PCIE1_BASE f2620000
-#define CP110_PCIE2_BASE f2640000
+#define CP11X_NAME cp0
+#define CP11X_BASE f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f2600000
+#define CP11X_PCIE1_BASE f2620000
+#define CP11X_PCIE2_BASE f2640000
#include "armada-cp110.dtsi"
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
&cp0_gpio1 {
status = "okay";
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts
index e813922..9fea84f 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts
@@ -7,9 +7,6 @@
#include "armada-8040.dtsi"
-#define GPIO_ACTIVE_HIGH 0
-#define GPIO_ACTIVE_LOW 1
-
/ {
model = "Marvell Armada 8040 DB board";
compatible = "marvell,armada8040-db", "marvell,armada8040",
@@ -29,6 +26,8 @@
ethernet1 = &cp0_eth2;
ethernet2 = &cp1_eth0;
ethernet3 = &cp1_eth1;
+ i2c1 = &cp0_i2c0;
+ i2c2 = &cp1_i2c0;
};
cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
@@ -54,11 +53,6 @@
vcc-supply = <&cp0_reg_usb3_0_vbus>;
};
- cp0_usb3_1_phy: cp0-usb3-1-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_1_vbus>;
- };
-
cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "cp1-usb3h0-vbus";
@@ -74,17 +68,10 @@
};
};
-&i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
&spi0 {
status = "okay";
spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
@@ -115,11 +102,15 @@
/* CON6 on CP0 expansion */
&cp0_pcie0 {
+ phys = <&cp0_comphy0 0>;
+ phy-names = "cp0-pcie0-x1-phy";
status = "okay";
};
/* CON5 on CP0 expansion */
&cp0_pcie2 {
+ phys = <&cp0_comphy5 2>;
+ phy-names = "cp0-pcie2-x1-phy";
status = "okay";
};
@@ -150,6 +141,15 @@
/* CON4 on CP0 expansion */
&cp0_sata0 {
status = "okay";
+
+ sata-port@0 {
+ phys = <&cp0_comphy1 0>;
+ phy-names = "cp0-sata0-0-phy";
+ };
+ sata-port@1 {
+ phys = <&cp0_comphy3 1>;
+ phy-names = "cp0-sata0-1-phy";
+ };
};
/* CON9 on CP0 expansion */
@@ -158,9 +158,17 @@
status = "okay";
};
+&cp0_comphy4 {
+ cp0_usbh1_con: connector {
+ compatible = "usb-a-connector";
+ phy-supply = <&cp0_reg_usb3_1_vbus>;
+ };
+};
+
/* CON10 on CP0 expansion */
&cp0_usb3_1 {
- usb-phy = <&cp0_usb3_1_phy>;
+ phys = <&cp0_comphy4 1>;
+ phy-names = "cp0-usb3h1-comphy";
status = "okay";
};
@@ -194,16 +202,22 @@
/* CON6 on CP1 expansion */
&cp1_pcie0 {
+ phys = <&cp1_comphy0 0>;
+ phy-names = "cp1-pcie0-x1-phy";
status = "okay";
};
/* CON7 on CP1 expansion */
&cp1_pcie1 {
+ phys = <&cp1_comphy4 1>;
+ phy-names = "cp1-pcie1-x1-phy";
status = "okay";
};
/* CON5 on CP1 expansion */
&cp1_pcie2 {
+ phys = <&cp1_comphy5 2>;
+ phy-names = "cp1-pcie2-x1-phy";
status = "okay";
};
@@ -216,8 +230,6 @@
status = "disabled";
spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <20000000>;
@@ -282,6 +294,15 @@
/* CON4 on CP1 expansion */
&cp1_sata0 {
status = "okay";
+
+ sata-port@0 {
+ phys = <&cp1_comphy1 0>;
+ phy-names = "cp1-sata0-0-phy";
+ };
+ sata-port@1 {
+ phys = <&cp1_comphy3 1>;
+ phy-names = "cp1-sata0-1-phy";
+ };
};
/* CON9 on CP1 expansion */
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
index d9c9348..740bdaf 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
@@ -5,233 +5,13 @@
* Device Tree file for MACCHIATOBin Armada 8040 community board platform
*/
-#include "armada-8040.dtsi"
-
-#define GPIO_ACTIVE_HIGH 0
-#define GPIO_ACTIVE_LOW 1
+#include "armada-8040-mcbin.dtsi"
/ {
- model = "Marvell 8040 MACCHIATOBin";
- compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+ model = "Marvell 8040 MACCHIATOBin Double-shot";
+ compatible = "marvell,armada8040-mcbin-doubleshot",
+ "marvell,armada8040-mcbin", "marvell,armada8040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- aliases {
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp1_eth0;
- ethernet2 = &cp1_eth1;
- ethernet3 = &cp1_eth2;
- };
-
- /* Regulator labels correspond with schematics */
- v_3_3: regulator-3-3v {
- compatible = "regulator-fixed";
- regulator-name = "v_3_3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- status = "okay";
- };
-
- v_vddo_h: regulator-1-8v {
- compatible = "regulator-fixed";
- regulator-name = "v_vddo_h";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- status = "okay";
- };
-
- v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_xhci_vbus_pins>;
- regulator-name = "v_5v0_usb3_hst_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- status = "okay";
- };
-
- usb3h0_phy: usb3_phy0 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&v_5v0_usb3_hst_vbus>;
- };
-
- sfp_eth0: sfp-eth0 {
- /* CON15,16 - CPM lane 4 */
- compatible = "sff,sfp";
- i2c-bus = <&sfpp0_i2c>;
- los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_sfpp0_pins>;
- };
-
- sfp_eth1: sfp-eth1 {
- /* CON17,18 - CPS lane 4 */
- compatible = "sff,sfp";
- i2c-bus = <&sfpp1_i2c>;
- los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
- };
-
- sfp_eth3: sfp-eth3 {
- /* CON3,4 - CPS lane 5 */
- compatible = "sff,sfp";
- i2c-bus = <&sfp_1g_i2c>;
- los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
- };
-};
-
-&uart0 {
- status = "okay";
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-&ap_sdhci0 {
- bus-width = <8>;
- /*
- * Not stable in HS modes - phy needs "more calibration", so add
- * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
- */
- marvell,xenon-phy-slow-mode;
- no-1-8-v;
- no-sd;
- no-sdio;
- non-removable;
- status = "okay";
- vqmmc-supply = <&v_vddo_h>;
-};
-
-&cp0_i2c0 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- status = "okay";
-};
-
-&cp0_i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c1_pins>;
- status = "okay";
-
- i2c-switch@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
-
- sfpp0_i2c: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
- sfpp1_i2c: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
- sfp_1g_i2c: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
- };
-};
-
-/* J25 UART header */
-&cp0_uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_uart1_pins>;
- status = "okay";
-};
-
-&cp0_mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_ge_mdio_pins>;
- status = "okay";
-
- ge_phy: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&cp0_pcie0 {
- compatible = "marvell,armada8k-pcie-ecam", "snps,dw-pcie-ecam";
- reg = <0 0xe0000000 0 0xff00000>;
- bus-range = <0 0xfe>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_pcie_pins>;
- num-lanes = <4>;
- num-viewport = <8>;
- reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
- ranges = <0x1000000 0x0 0x00000000 0x0 0xeff00000 0x0 0x00010000>,
- <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>,
- <0x3000000 0x8 0x00000000 0x8 0x00000000 0x1 0x00000000>;
- status = "okay";
-};
-
-&cp0_pinctrl {
- cp0_ge_mdio_pins: ge-mdio-pins {
- marvell,pins = "mpp32", "mpp34";
- marvell,function = "ge";
- };
- cp0_i2c1_pins: i2c1-pins {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
- cp0_i2c0_pins: i2c0-pins {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp0_uart1_pins: uart1-pins {
- marvell,pins = "mpp40", "mpp41";
- marvell,function = "uart1";
- };
- cp0_xhci_vbus_pins: xhci0-vbus-pins {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- cp0_sfp_1g_pins: sfp-1g-pins {
- marvell,pins = "mpp51", "mpp53", "mpp54";
- marvell,function = "gpio";
- };
- cp0_pcie_pins: pcie-pins {
- marvell,pins = "mpp52";
- marvell,function = "gpio";
- };
- cp0_sdhci_pins: sdhci-pins {
- marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
- "mpp60", "mpp61";
- marvell,function = "sdio";
- };
- cp0_sfpp1_pins: sfpp1-pins {
- marvell,pins = "mpp62";
- marvell,function = "gpio";
- };
};
&cp0_xmdio {
@@ -250,128 +30,16 @@
};
};
-&cp0_ethernet {
- status = "okay";
-};
-
&cp0_eth0 {
status = "okay";
/* Network PHY */
phy = <&phy0>;
- phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp0_comphy4 0>;
-};
-
-&cp0_sata0 {
- /* CPM Lane 0 - U29 */
- status = "okay";
-};
-
-&cp0_sdhci0 {
- /* U6 */
- broken-cd;
- bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_sdhci_pins>;
- status = "okay";
- vqmmc-supply = <&v_3_3>;
-};
-
-&cp0_usb3_0 {
- /* J38? - USB2.0 only */
- status = "okay";
-};
-
-&cp0_usb3_1 {
- /* J38? - USB2.0 only */
- status = "okay";
-};
-
-&cp1_ethernet {
- status = "okay";
+ phy-mode = "10gbase-r";
};
&cp1_eth0 {
status = "okay";
/* Network PHY */
phy = <&phy8>;
- phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy4 0>;
-};
-
-&cp1_eth1 {
- /* CPS Lane 0 - J5 (Gigabit RJ45) */
- status = "okay";
- /* Network PHY */
- phy = <&ge_phy>;
- phy-mode = "sgmii";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy0 1>;
-};
-
-&cp1_eth2 {
- /* CPS Lane 5 */
- status = "okay";
- /* Network PHY */
- phy-mode = "2500base-x";
- managed = "in-band-status";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy5 2>;
- sfp = <&sfp_eth3>;
-};
-
-&cp1_pinctrl {
- cp1_sfpp1_pins: sfpp1-pins {
- marvell,pins = "mpp8", "mpp10", "mpp11";
- marvell,function = "gpio";
- };
- cp1_spi1_pins: spi1-pins {
- marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- cp1_uart0_pins: uart0-pins {
- marvell,pins = "mpp6", "mpp7";
- marvell,function = "uart0";
- };
- cp1_sfp_1g_pins: sfp-1g-pins {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
- cp1_sfpp0_pins: sfpp0-pins {
- marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
- marvell,function = "gpio";
- };
-};
-
-/* J27 UART header */
-&cp1_uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_uart0_pins>;
- status = "okay";
-};
-
-&cp1_sata0 {
- /* CPS Lane 1 - U32 */
- /* CPS Lane 3 - U31 */
- status = "okay";
-};
-
-&cp1_spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_spi1_pins>;
- status = "disabled";
-
- spi-flash@0 {
- compatible = "st,w25q32";
- spi-max-frequency = <50000000>;
- reg = <0>;
- };
-};
-
-&cp1_usb3_0 {
- /* CPS Lane 2 - CON7 */
- usb-phy = <&usb3h0_phy>;
- status = "okay";
+ phy-mode = "10gbase-r";
};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dtsi
new file mode 100644
index 0000000..970e875
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dtsi
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040.dtsi"
+
+/ {
+ model = "Marvell 8040 MACCHIATOBin";
+ compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ aliases {
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp1_eth0;
+ ethernet2 = &cp1_eth1;
+ ethernet3 = &cp1_eth2;
+ };
+
+ /* Regulator labels correspond with schematics */
+ v_3_3: regulator-3-3v {
+ compatible = "regulator-fixed";
+ regulator-name = "v_3_3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ v_vddo_h: regulator-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "v_vddo_h";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
+ regulator-name = "v_5v0_usb3_hst_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ status = "okay";
+ };
+
+ sfp_eth0: sfp-eth0 {
+ /* CON15,16 - CPM lane 4 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpp0_i2c>;
+ los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_sfpp0_pins>;
+ maximum-power-milliwatt = <2000>;
+ };
+
+ sfp_eth1: sfp-eth1 {
+ /* CON17,18 - CPS lane 4 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpp1_i2c>;
+ los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+ maximum-power-milliwatt = <2000>;
+ };
+
+ sfp_eth3: sfp-eth3 {
+ /* CON13,14 - CPS lane 5 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp_1g_i2c>;
+ los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+ maximum-power-milliwatt = <2000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+ bus-width = <8>;
+ /*
+ * Not stable in HS modes - phy needs "more calibration", so add
+ * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+ */
+ marvell,xenon-phy-slow-mode;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+ vqmmc-supply = <&v_vddo_h>;
+};
+
+&cp0_i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+};
+
+&cp0_i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ sfpp0_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ sfpp1_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ sfp_1g_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ };
+};
+
+/* J25 UART header */
+&cp0_uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_uart1_pins>;
+ status = "okay";
+};
+
+&cp0_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_ge_mdio_pins>;
+ status = "okay";
+
+ ge_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cp0_pcie0 {
+ compatible = "marvell,armada8k-pcie-ecam", "pci-host-ecam-generic";
+ reg = <0 0xe0000000 0 0xff00000>;
+ bus-range = <0 0xfe>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_pcie_pins>;
+ num-lanes = <4>;
+ num-viewport = <8>;
+ reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
+ ranges = <0x1000000 0x0 0x00000000 0x0 0xeff00000 0x0 0x00010000>,
+ <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>,
+ <0x3000000 0x8 0x00000000 0x8 0x00000000 0x1 0x00000000>;
+ phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
+ <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+ phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
+ "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy";
+ status = "okay";
+};
+
+&cp0_pinctrl {
+ cp0_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp32", "mpp34";
+ marvell,function = "ge";
+ };
+ cp0_i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_uart1_pins: uart1-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "uart1";
+ };
+ cp0_xhci_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ cp0_sfp_1g_pins: sfp-1g-pins {
+ marvell,pins = "mpp51", "mpp53", "mpp54";
+ marvell,function = "gpio";
+ };
+ cp0_pcie_pins: pcie-pins {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
+ cp0_sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+ "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+ cp0_sfpp1_pins: sfpp1-pins {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+&cp0_eth0 {
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy4 0>;
+};
+
+&cp0_sata0 {
+ status = "okay";
+
+ /* CPM Lane 5 - U29 */
+ sata-port@1 {
+ phys = <&cp0_comphy5 1>;
+ phy-names = "cp0-sata0-1-phy";
+ };
+};
+
+&cp0_sdhci0 {
+ /* U6 */
+ broken-cd;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sdhci_pins>;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_usb3_0 {
+ /* J38? - USB2.0 only */
+ status = "okay";
+};
+
+&cp0_usb3_1 {
+ /* J38? - USB2.0 only */
+ status = "okay";
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+&cp1_eth0 {
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy4 0>;
+};
+
+&cp1_eth1 {
+ /* CPS Lane 0 - J5 (Gigabit RJ45) */
+ status = "okay";
+ /* Network PHY */
+ phy = <&ge_phy>;
+ phy-mode = "sgmii";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy0 1>;
+};
+
+&cp1_eth2 {
+ /* CPS Lane 5 */
+ status = "okay";
+ /* Network PHY */
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy5 2>;
+ sfp = <&sfp_eth3>;
+};
+
+&cp1_pinctrl {
+ cp1_sfpp1_pins: sfpp1-pins {
+ marvell,pins = "mpp8", "mpp10", "mpp11";
+ marvell,function = "gpio";
+ };
+ cp1_spi1_pins: spi1-pins {
+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ cp1_uart0_pins: uart0-pins {
+ marvell,pins = "mpp6", "mpp7";
+ marvell,function = "uart0";
+ };
+ cp1_sfp_1g_pins: sfp-1g-pins {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ cp1_sfpp0_pins: sfpp0-pins {
+ marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
+ marvell,function = "gpio";
+ };
+};
+
+/* J27 UART header */
+&cp1_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_uart0_pins>;
+ status = "okay";
+};
+
+&cp1_sata0 {
+ status = "okay";
+
+ /* CPS Lane 1 - U32 */
+ sata-port@0 {
+ phys = <&cp1_comphy1 0>;
+ phy-names = "cp1-sata0-0-phy";
+ };
+
+ /* CPS Lane 3 - U31 */
+ sata-port@1 {
+ phys = <&cp1_comphy3 1>;
+ phy-names = "cp1-sata0-1-phy";
+ };
+};
+
+&cp1_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_spi1_pins>;
+
+ spi-flash@0 {
+ compatible = "st,w25q32";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&cp1_comphy2 {
+ cp1_usbh0_con: connector {
+ compatible = "usb-a-connector";
+ phy-supply = <&v_5v0_usb3_hst_vbus>;
+ };
+};
+
+&cp1_usb3_0 {
+ /* CPS Lane 2 - CON7 */
+ phys = <&cp1_comphy2 0>;
+ phy-names = "cp1-usb3h0-comphy";
+ status = "okay";
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi
index 784ef3f..0a676df 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040.dtsi
@@ -15,6 +15,14 @@
"marvell,armada-ap806";
};
+&cp0_pcie0 {
+ iommu-map =
+ <0x0 &smmu 0x480 0x20>,
+ <0x100 &smmu 0x4a0 0x20>,
+ <0x200 &smmu 0x4c0 0x20>;
+ iommu-map-mask = <0x031f>;
+};
+
/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
* in CP master is not connected (by package) to the oscillator. So
* disable it. However, the RTC clock in CP slave is connected to the
@@ -23,3 +31,31 @@
&cp0_rtc {
status = "disabled";
};
+
+&cp0_sata0 {
+ iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+ iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+ iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+ iommus = <&smmu 0x441>;
+};
+
+&cp1_sata0 {
+ iommus = <&smmu 0x454>;
+};
+
+&cp1_usb3_0 {
+ iommus = <&smmu 0x450>;
+};
+
+&cp1_usb3_1 {
+ iommus = <&smmu 0x451>;
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi
index 81967e2..2ee35fa 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-80x0.dtsi
@@ -19,44 +19,44 @@
/*
* Instantiate the master CP110
*/
-#define CP110_NAME cp0
-#define CP110_BASE f2000000
-#define CP110_PCIE_IO_BASE 0xf9000000
-#define CP110_PCIE_MEM_BASE 0xf6000000
-#define CP110_PCIE0_BASE f2600000
-#define CP110_PCIE1_BASE f2620000
-#define CP110_PCIE2_BASE f2640000
+#define CP11X_NAME cp0
+#define CP11X_BASE f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f2600000
+#define CP11X_PCIE1_BASE f2620000
+#define CP11X_PCIE2_BASE f2640000
#include "armada-cp110.dtsi"
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
/*
* Instantiate the slave CP110
*/
-#define CP110_NAME cp1
-#define CP110_BASE f4000000
-#define CP110_PCIE_IO_BASE 0xfd000000
-#define CP110_PCIE_MEM_BASE 0xfa000000
-#define CP110_PCIE0_BASE f4600000
-#define CP110_PCIE1_BASE f4620000
-#define CP110_PCIE2_BASE f4640000
+#define CP11X_NAME cp1
+#define CP11X_BASE f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f4600000
+#define CP11X_PCIE1_BASE f4620000
+#define CP11X_PCIE2_BASE f4640000
#include "armada-cp110.dtsi"
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
/* The 80x0 has two CP blocks, but uses only one block from each. */
&cp1_gpio1 {
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi
index 5985843..0cd8e7e 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-dual.dtsi
@@ -15,17 +15,47 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
+ compatible = "arm,cortex-a72";
reg = <0x000>;
enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
+ compatible = "arm,cortex-a72";
reg = <0x001>;
enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2>;
};
+
+ l2: l2-cache {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+ };
+
+ thermal-zones {
+ /delete-node/ ap-thermal-cpu2;
+ /delete-node/ ap-thermal-cpu3;
};
};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi
index bae0ed9..3b48a13 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806-quad.dtsi
@@ -15,29 +15,79 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
+ compatible = "arm,cortex-a72";
reg = <0x000>;
enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
+ compatible = "arm,cortex-a72";
reg = <0x001>;
enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_0>;
};
- cpu@100 {
+ cpu2: cpu@100 {
device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
+ compatible = "arm,cortex-a72";
reg = <0x100>;
enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 1>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_1>;
};
- cpu@101 {
+ cpu3: cpu@101 {
device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
+ compatible = "arm,cortex-a72";
reg = <0x101>;
enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 1>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_1>;
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi
index 66124bf..59641de 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap806.dtsi
@@ -5,260 +5,26 @@
* Device Tree file for Marvell Armada AP806.
*/
-#define IRQ_TYPE_LEVEL_HIGH (1 << 2)
-#define IRQ_TYPE_LEVEL_LOW (1 << 3)
-
-#define GIC_SPI 0
-#define GIC_PPI 1
-
-#define GIC_CPU_MASK_RAW(x) ((x) << 8)
-#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
-
-/dts-v1/;
+#define AP_NAME ap806
+#include "armada-ap80x.dtsi"
/ {
model = "Marvell Armada AP806";
compatible = "marvell,armada-ap806";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- gpio0 = &ap_gpio;
- spi0 = &spi0;
- };
+};
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
+&ap_syscon0 {
+ ap_clk: clock {
+ compatible = "marvell,ap806-clock";
+ #clock-cells = <1>;
};
+};
- ap806 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- config-space@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x0 0xf0000000 0x1000000>;
-
- gic: interrupt-controller@210000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x210000 0x10000>,
- <0x220000 0x20000>,
- <0x240000 0x20000>,
- <0x260000 0x20000>;
-
- gic_v2m0: v2m@280000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x280000 0x1000>;
- arm,msi-base-spi = <160>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m1: v2m@290000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x290000 0x1000>;
- arm,msi-base-spi = <192>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m2: v2m@2a0000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x2a0000 0x1000>;
- arm,msi-base-spi = <224>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m3: v2m@2b0000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x2b0000 0x1000>;
- arm,msi-base-spi = <256>;
- arm,msi-num-spis = <32>;
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu {
- compatible = "arm,cortex-a72-pmu";
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
-
- odmi: odmi@300000 {
- compatible = "marvell,odmi-controller";
- interrupt-controller;
- msi-controller;
- marvell,odmi-frames = <4>;
- reg = <0x300000 0x4000>,
- <0x304000 0x4000>,
- <0x308000 0x4000>,
- <0x30C000 0x4000>;
- marvell,spi-base = <128>, <136>, <144>, <152>;
- };
-
- gicp: gicp@3f0040 {
- compatible = "marvell,ap806-gicp";
- reg = <0x3f0040 0x10>;
- marvell,spi-ranges = <64 64>, <288 64>;
- msi-controller;
- };
-
- pic: interrupt-controller@3f0100 {
- compatible = "marvell,armada-8k-pic";
- reg = <0x3f0100 0x10>;
- #interrupt-cells = <1>;
- interrupt-controller;
- interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- xor@400000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x400000 0x1000>,
- <0x410000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- xor@420000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x420000 0x1000>,
- <0x430000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- xor@440000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x440000 0x1000>,
- <0x450000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- xor@460000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x460000 0x1000>,
- <0x470000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- spi0: spi@510600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x510600 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ap_clk 3>;
- status = "disabled";
- };
-
- i2c0: i2c@511000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x511000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- timeout-ms = <1000>;
- clocks = <&ap_clk 3>;
- status = "disabled";
- };
-
- uart0: serial@512000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x512000 0x100>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clocks = <&ap_clk 3>;
- status = "disabled";
- };
-
- uart1: serial@512100 {
- compatible = "snps,dw-apb-uart";
- reg = <0x512100 0x100>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clocks = <&ap_clk 3>;
- status = "disabled";
-
- };
-
- watchdog: watchdog@610000 {
- compatible = "arm,sbsa-gwdt";
- reg = <0x610000 0x1000>, <0x600000 0x1000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- ap_sdhci0: sdhci@6e0000 {
- compatible = "marvell,armada-ap806-sdhci";
- reg = <0x6e0000 0x300>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core";
- clocks = <&ap_clk 4>;
- dma-coherent;
- marvell,xenon-phy-slow-mode;
- status = "disabled";
- };
-
- ap_syscon: system-controller@6f4000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x6f4000 0x2000>;
-
- ap_clk: clock {
- compatible = "marvell,ap806-clock";
- #clock-cells = <1>;
- };
-
- ap_pinctrl: pinctrl {
- compatible = "marvell,ap806-pinctrl";
-
- uart0_pins: uart0-pins {
- marvell,pins = "mpp11", "mpp19";
- marvell,function = "uart0";
- };
- };
-
- ap_gpio: gpio@1040 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x1040>;
- ngpios = <20>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&ap_pinctrl 0 0 20>;
- };
- };
-
- ap_thermal: thermal@6f808c {
- compatible = "marvell,armada-ap806-thermal";
- reg = <0x6f808c 0x4>,
- <0x6f8084 0x8>;
- };
- };
+&ap_syscon1 {
+ cpu_clk: clock-cpu@278 {
+ compatible = "marvell,ap806-cpu-clock";
+ clocks = <&ap_clk 0>, <&ap_clk 1>;
+ #clock-cells = <1>;
+ reg = <0x278 0xa30>;
};
};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap807-quad.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap807-quad.dtsi
new file mode 100644
index 0000000..6222569
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap807-quad.dtsi
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807 Quad
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#include "armada-ap807.dtsi"
+
+/ {
+ model = "Marvell Armada AP807 Quad";
+ compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x000>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_0>;
+ };
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x001>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_0>;
+ };
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x100>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 1>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_1>;
+ };
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x101>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 1>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_1>;
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+ };
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap807.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap807.dtsi
new file mode 100644
index 0000000..b42dc3a
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap807.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#define AP_NAME ap807
+#include "armada-ap80x.dtsi"
+
+/ {
+ model = "Marvell Armada AP807";
+ compatible = "marvell,armada-ap807";
+};
+
+&ap_syscon0 {
+ ap_clk: clock {
+ compatible = "marvell,ap807-clock";
+ #clock-cells = <1>;
+ };
+};
+
+&ap_syscon1 {
+ cpu_clk: clock-cpu {
+ compatible = "marvell,ap807-cpu-clock";
+ clocks = <&ap_clk 0>, <&ap_clk 1>;
+ #clock-cells = <1>;
+ };
+};
+
+&ap_sdhci0 {
+ compatible = "marvell,armada-ap807-sdhci";
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap80x.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap80x.dtsi
new file mode 100644
index 0000000..c2a7cef
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-ap80x.dtsi
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP80x.
+ */
+
+#define IRQ_TYPE_LEVEL_HIGH (1 << 2)
+#define IRQ_TYPE_LEVEL_LOW (1 << 3)
+
+#define GIC_SPI 0
+#define GIC_PPI 1
+
+#define GIC_CPU_MASK_RAW(x) ((x) << 8)
+#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
+
+#define GPIO_ACTIVE_HIGH 0
+#define GPIO_ACTIVE_LOW 1
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ gpio0 = &ap_gpio;
+ spi0 = &spi0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /*
+ * This area matches the mapping done with a
+ * mainline U-Boot, and should be updated by the
+ * bootloader.
+ */
+
+ psci-area@4000000 {
+ reg = <0x0 0x4000000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ AP_NAME {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ config-space@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+ smmu: iommu@5000000 {
+ compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
+ reg = <0x100000 0x100000>;
+ dma-coherent;
+ #iommu-cells = <1>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@210000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x210000 0x10000>,
+ <0x220000 0x20000>,
+ <0x240000 0x20000>,
+ <0x260000 0x20000>;
+
+ gic_v2m0: v2m@280000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x280000 0x1000>;
+ arm,msi-base-spi = <160>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m1: v2m@290000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x290000 0x1000>;
+ arm,msi-base-spi = <192>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m2: v2m@2a0000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x2a0000 0x1000>;
+ arm,msi-base-spi = <224>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m3: v2m@2b0000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x2b0000 0x1000>;
+ arm,msi-base-spi = <256>;
+ arm,msi-num-spis = <32>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a72-pmu";
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+
+ odmi: odmi@300000 {
+ compatible = "marvell,odmi-controller";
+ interrupt-controller;
+ msi-controller;
+ marvell,odmi-frames = <4>;
+ reg = <0x300000 0x4000>,
+ <0x304000 0x4000>,
+ <0x308000 0x4000>,
+ <0x30C000 0x4000>;
+ marvell,spi-base = <128>, <136>, <144>, <152>;
+ };
+
+ gicp: gicp@3f0040 {
+ compatible = "marvell,ap806-gicp";
+ reg = <0x3f0040 0x10>;
+ marvell,spi-ranges = <64 64>, <288 64>;
+ msi-controller;
+ };
+
+ pic: interrupt-controller@3f0100 {
+ compatible = "marvell,armada-8k-pic";
+ reg = <0x3f0100 0x10>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sei: interrupt-controller@3f0200 {
+ compatible = "marvell,ap806-sei";
+ reg = <0x3f0200 0x40>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ };
+
+ xor@400000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x400000 0x1000>,
+ <0x410000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ xor@420000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x420000 0x1000>,
+ <0x430000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ xor@440000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x440000 0x1000>,
+ <0x450000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ xor@460000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x460000 0x1000>,
+ <0x470000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ spi0: spi@510600 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x510600 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@511000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x511000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+ };
+
+ uart0: serial@512000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x512000 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+ };
+
+ uart1: serial@512100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x512100 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+
+ };
+
+ watchdog: watchdog@610000 {
+ compatible = "arm,sbsa-gwdt";
+ reg = <0x610000 0x1000>, <0x600000 0x1000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ap_sdhci0: sdhci@6e0000 {
+ compatible = "marvell,armada-ap806-sdhci";
+ reg = <0x6e0000 0x300>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core";
+ clocks = <&ap_clk 4>;
+ dma-coherent;
+ marvell,xenon-phy-slow-mode;
+ status = "disabled";
+ };
+
+ ap_syscon0: system-controller@6f4000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x6f4000 0x2000>;
+
+ ap_pinctrl: pinctrl {
+ compatible = "marvell,ap806-pinctrl";
+
+ uart0_pins: uart0-pins {
+ marvell,pins = "mpp11", "mpp19";
+ marvell,function = "uart0";
+ };
+ };
+
+ ap_gpio: gpio@1040 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x1040>;
+ ngpios = <20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&ap_pinctrl 0 0 20>;
+ };
+ };
+
+ ap_syscon1: system-controller@6f8000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x6f8000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ap_thermal: thermal-sensor@80 {
+ compatible = "marvell,armada-ap806-thermal";
+ reg = <0x80 0x10>;
+ interrupt-parent = <&sei>;
+ interrupts = <18>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+ };
+ };
+
+ /*
+ * The thermal IP features one internal sensor plus, if applicable, one
+ * remote channel wired to one sensor per CPU.
+ *
+ * Only one thermal zone per AP/CP may trigger interrupts at a time, the
+ * first one that will have a critical trip point will be chosen.
+ */
+ thermal-zones {
+ ap_thermal_ic: ap-thermal-ic {
+ polling-delay-passive = <0>; /* Interrupt driven */
+ polling-delay = <0>; /* Interrupt driven */
+
+ thermal-sensors = <&ap_thermal 0>;
+
+ trips {
+ ap_crit: ap-crit {
+ temperature = <100000>; /* mC degrees */
+ hysteresis = <2000>; /* mC degrees */
+ type = "critical";
+ };
+ };
+
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu0: ap-thermal-cpu0 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 1>;
+
+ trips {
+ cpu0_hot: cpu0-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu0_emerg: cpu0-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0_hot: map0-hot {
+ trip = <&cpu0_hot>;
+ cooling-device = <&cpu0 1 2>,
+ <&cpu1 1 2>;
+ };
+ map0_emerg: map0-ermerg {
+ trip = <&cpu0_emerg>;
+ cooling-device = <&cpu0 3 3>,
+ <&cpu1 3 3>;
+ };
+ };
+ };
+
+ ap_thermal_cpu1: ap-thermal-cpu1 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 2>;
+
+ trips {
+ cpu1_hot: cpu1-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu1_emerg: cpu1-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map1_hot: map1-hot {
+ trip = <&cpu1_hot>;
+ cooling-device = <&cpu0 1 2>,
+ <&cpu1 1 2>;
+ };
+ map1_emerg: map1-emerg {
+ trip = <&cpu1_emerg>;
+ cooling-device = <&cpu0 3 3>,
+ <&cpu1 3 3>;
+ };
+ };
+ };
+
+ ap_thermal_cpu2: ap-thermal-cpu2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 3>;
+
+ trips {
+ cpu2_hot: cpu2-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu2_emerg: cpu2-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map2_hot: map2-hot {
+ trip = <&cpu2_hot>;
+ cooling-device = <&cpu2 1 2>,
+ <&cpu3 1 2>;
+ };
+ map2_emerg: map2-emerg {
+ trip = <&cpu2_emerg>;
+ cooling-device = <&cpu2 3 3>,
+ <&cpu3 3 3>;
+ };
+ };
+ };
+
+ ap_thermal_cpu3: ap-thermal-cpu3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 4>;
+
+ trips {
+ cpu3_hot: cpu3-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu3_emerg: cpu3-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map3_hot: map3-bhot {
+ trip = <&cpu3_hot>;
+ cooling-device = <&cpu2 1 2>,
+ <&cpu3 1 2>;
+ };
+ map3_emerg: map3-emerg {
+ trip = <&cpu3_emerg>;
+ cooling-device = <&cpu2 3 3>,
+ <&cpu3 3 3>;
+ };
+ };
+ };
+ };
+};
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi
index 8b610fd..f002499 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-common.dtsi
@@ -6,5 +6,6 @@
/* Common definitions used by Armada 7K/8K DTs */
#define PASTER(x, y) x ## y
#define EVALUATOR(x, y) PASTER(x, y)
-#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
+#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name))
+#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name))
#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi
index 5e8e524..5799e98 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp110.dtsi
@@ -1,560 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
*
* Device Tree file for Marvell Armada CP110.
*/
-#include "armada-common.dtsi"
+#define CP11X_TYPE cp110
-#define ICU_GRP_NSR 0x0
-#define ICU_GRP_SR 0x1
-#define ICU_GRP_SEI 0x4
-#define ICU_GRP_REI 0x5
+#include "armada-cp11x.dtsi"
-#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000))
-#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000))
-#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
-
-/ {
- /*
- * The contents of the node are defined below, in order to
- * save one indentation level
- */
- CP110_NAME: CP110_NAME { };
-};
-
-&CP110_NAME {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&CP110_LABEL(icu)>;
- ranges;
-
- config-space@CP110_BASE {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
-
- CP110_LABEL(ethernet): ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
- <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- clock-names = "pp_clk", "gop_clk",
- "mg_clk", "mg_core_clk", "axi_clk";
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- status = "disabled";
- dma-coherent;
-
- CP110_LABEL(eth0): eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <0>;
- gop-port-id = <0>;
- status = "disabled";
- };
-
- CP110_LABEL(eth1): eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <1>;
- gop-port-id = <2>;
- status = "disabled";
- };
-
- CP110_LABEL(eth2): eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <2>;
- gop-port-id = <3>;
- status = "disabled";
- };
- };
-
- CP110_LABEL(comphy): phy@120000 {
- compatible = "marvell,comphy-cp110";
- reg = <0x120000 0x6000>;
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- CP110_LABEL(comphy0): phy@0 {
- reg = <0>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy1): phy@1 {
- reg = <1>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy2): phy@2 {
- reg = <2>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy3): phy@3 {
- reg = <3>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy4): phy@4 {
- reg = <4>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy5): phy@5 {
- reg = <5>;
- #phy-cells = <1>;
- };
- };
-
- CP110_LABEL(mdio): mdio@12a200 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
- reg = <0x12a200 0x10>;
- clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
- <&CP110_LABEL(core_clk)>, <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(xmdio): mdio@12a600 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,xmdio";
- reg = <0x12a600 0x10>;
- clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(icu): interrupt-controller@1e0000 {
- compatible = "marvell,cp110-icu";
- reg = <0x1e0000 0x440>;
- #interrupt-cells = <3>;
- interrupt-controller;
- msi-parent = <&gicp>;
- };
-
- CP110_LABEL(rtc): rtc@284000 {
- compatible = "marvell,armada-8k-rtc";
- reg = <0x284000 0x20>, <0x284080 0x24>;
- reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- CP110_LABEL(thermal): thermal@400078 {
- compatible = "marvell,armada-cp110-thermal";
- reg = <0x400078 0x4>,
- <0x400070 0x8>;
- };
-
- CP110_LABEL(syscon0): system-controller@440000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x440000 0x2000>;
-
- CP110_LABEL(clk): clock {
- compatible = "marvell,cp110-clock";
- status = "disabled";
- #clock-cells = <2>;
- };
-
- CP110_LABEL(gpio1): gpio@100 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x100>;
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
- interrupt-controller;
- interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- CP110_LABEL(gpio2): gpio@140 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x140>;
- ngpios = <31>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
- interrupt-controller;
- interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
- };
-
- CP110_LABEL(usb3_0): usb3@500000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x500000 0x4000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(usb3_1): usb3@510000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x510000 0x4000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(sata0): sata@540000 {
- compatible = "marvell,armada-8k-ahci",
- "generic-ahci";
- reg = <0x540000 0x30000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(xor0): xor@6a0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- };
-
- CP110_LABEL(xor1): xor@6c0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- };
-
- CP110_LABEL(spi0): spi@700600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700600 0x50>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(spi1): spi@700680 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700680 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(i2c0): i2c@701000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(i2c1): i2c@701100 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701100 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart0): serial@702000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702000 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart1): serial@702100 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702100 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart2): serial@702200 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702200 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart3): serial@702300 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702300 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(nand_controller): nand@720000 {
- /*
- * Due to the limitation of the pins available
- * this controller is only usable on the CPM
- * for A7K and on the CPS for A8K.
- */
- compatible = "marvell,armada-8k-nand-controller",
- "marvell,armada370-nand-controller";
- reg = <0x720000 0x54>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(nand_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- status = "disabled";
- };
-
- CP110_LABEL(trng): trng@760000 {
- compatible = "marvell,armada-8k-rng",
- "inside-secure,safexcel-eip76";
- reg = <0x760000 0x7d>;
- interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(x2core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "okay";
- };
-
- CP110_LABEL(sdhci0): sdhci@780000 {
- compatible = "marvell,armada-cp110-sdhci";
- reg = <0x780000 0x300>;
- interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(sdio_clk)>, <&CP110_LABEL(core_clk)>;
- dma-coherent;
- status = "disabled";
- };
-
- CP110_LABEL(crypto): crypto@800000 {
- compatible = "inside-secure,safexcel-eip197";
- reg = <0x800000 0x200000>;
- interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mem", "ring0", "ring1",
- "ring2", "ring3", "eip";
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(x2core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- dma-coherent;
- };
- };
-
- CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- /* 1 GHz fixed main PLL */
- CP110_LABEL(mainpll): CP110_LABEL(mainpll) {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000000>;
- };
-
- CP110_LABEL(x2core_clk): CP110_LABEL(x2core_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <2>;
- };
-
- CP110_LABEL(core_clk): CP110_LABEL(core_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <2>;
- };
-
- CP110_LABEL(sdio_clk): CP110_LABEL(sdio_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <2>;
- clock-div = <5>;
- };
-
- CP110_LABEL(nand_clk): CP110_LABEL(nand_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <2>;
- clock-div = <5>;
- };
-
- CP110_LABEL(ppv2_clk): CP110_LABEL(ppv2_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <3>;
- };
-
- CP110_LABEL(slow_io_clk): CP110_LABEL(slow_io_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <4>;
- };
-};
+#undef CP11X_TYPE
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp115.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp115.dtsi
new file mode 100644
index 0000000..f57860f
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp115.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP115.
+ */
+
+#define CP11X_TYPE cp115
+
+#include "armada-cp11x.dtsi"
+
+#undef CP11X_TYPE
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp11x.dtsi b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp11x.dtsi
new file mode 100644
index 0000000..7f26842
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-cp11x.dtsi
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP11x.
+ */
+
+#define ICU_GRP_NSR 0x0
+#define ICU_GRP_SR 0x1
+#define ICU_GRP_SEI 0x4
+#define ICU_GRP_REI 0x5
+
+#include "armada-common.dtsi"
+
+#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface))
+
+/ {
+ /*
+ * The contents of the node are defined below, in order to
+ * save one indentation level
+ */
+ CP11X_NAME: CP11X_NAME { };
+
+ /*
+ * CPs only have one sensor in the thermal IC.
+ *
+ * The cooling maps are empty as there are no cooling devices.
+ */
+ thermal-zones {
+ CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
+ polling-delay-passive = <0>; /* Interrupt driven */
+ polling-delay = <0>; /* Interrupt driven */
+
+ thermal-sensors = <&CP11X_LABEL(thermal) 0>;
+
+ trips {
+ CP11X_LABEL(crit): crit {
+ temperature = <100000>; /* mC degrees */
+ hysteresis = <2000>; /* mC degrees */
+ type = "critical";
+ };
+ };
+
+ cooling-maps { };
+ };
+ };
+};
+
+&CP11X_NAME {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
+ ranges;
+
+ config-space@CP11X_BASE {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
+
+ CP11X_LABEL(ethernet): ethernet@0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>;
+ clocks = <&CP11X_LABEL(ppv2_clk)>, <&CP11X_LABEL(ppv2_clk)>,
+ <&CP11X_LABEL(ppv2_clk)>, <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ clock-names = "pp_clk", "gop_clk",
+ "mg_clk", "mg_core_clk", "axi_clk";
+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+ status = "disabled";
+ dma-coherent;
+
+ CP11X_LABEL(eth0): eth0 {
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
+ <43 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <51 IRQ_TYPE_LEVEL_HIGH>,
+ <55 IRQ_TYPE_LEVEL_HIGH>,
+ <59 IRQ_TYPE_LEVEL_HIGH>,
+ <63 IRQ_TYPE_LEVEL_HIGH>,
+ <67 IRQ_TYPE_LEVEL_HIGH>,
+ <71 IRQ_TYPE_LEVEL_HIGH>,
+ <129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
+ port-id = <0>;
+ gop-port-id = <0>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(eth1): eth1 {
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
+ <44 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>,
+ <52 IRQ_TYPE_LEVEL_HIGH>,
+ <56 IRQ_TYPE_LEVEL_HIGH>,
+ <60 IRQ_TYPE_LEVEL_HIGH>,
+ <64 IRQ_TYPE_LEVEL_HIGH>,
+ <68 IRQ_TYPE_LEVEL_HIGH>,
+ <72 IRQ_TYPE_LEVEL_HIGH>,
+ <128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
+ port-id = <1>;
+ gop-port-id = <2>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(eth2): eth2 {
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
+ <45 IRQ_TYPE_LEVEL_HIGH>,
+ <49 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>,
+ <57 IRQ_TYPE_LEVEL_HIGH>,
+ <61 IRQ_TYPE_LEVEL_HIGH>,
+ <65 IRQ_TYPE_LEVEL_HIGH>,
+ <69 IRQ_TYPE_LEVEL_HIGH>,
+ <73 IRQ_TYPE_LEVEL_HIGH>,
+ <127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
+ port-id = <2>;
+ gop-port-id = <3>;
+ status = "disabled";
+ };
+ };
+
+ CP11X_LABEL(comphy): phy@120000 {
+ compatible = "marvell,comphy-cp110";
+ reg = <0x120000 0x6000>;
+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+ clocks = <&CP11X_LABEL(ppv2_clk)>, <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ clock-names = "mg_clk", "mg_core_clk", "axi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CP11X_LABEL(comphy0): phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy1): phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy2): phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy3): phy@3 {
+ reg = <3>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy4): phy@4 {
+ reg = <4>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy5): phy@5 {
+ reg = <5>;
+ #phy-cells = <1>;
+ };
+ };
+
+ CP11X_LABEL(mdio): mdio@12a200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x12a200 0x10>;
+ clocks = <&CP11X_LABEL(ppv2_clk)>, <&CP11X_LABEL(ppv2_clk)>,
+ <&CP11X_LABEL(core_clk)>, <&CP11X_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(xmdio): mdio@12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x10>;
+ clocks = <&CP11X_LABEL(ppv2_clk)>, <&CP11X_LABEL(ppv2_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(icu): interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x440>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP11X_LABEL(icu_nsr): interrupt-controller@10 {
+ compatible = "marvell,cp110-icu-nsr";
+ reg = <0x10 0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
+
+ CP11X_LABEL(icu_sei): interrupt-controller@50 {
+ compatible = "marvell,cp110-icu-sei";
+ reg = <0x50 0x10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&sei>;
+ };
+ };
+
+ CP11X_LABEL(rtc): rtc@284000 {
+ compatible = "marvell,armada-8k-rtc";
+ reg = <0x284000 0x20>, <0x284080 0x24>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(syscon0): system-controller@440000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x440000 0x2000>;
+
+ CP11X_LABEL(clk): clock {
+ compatible = "marvell,cp110-clock";
+ status = "disabled";
+ #clock-cells = <2>;
+ };
+
+ CP11X_LABEL(gpio1): gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
+ interrupt-controller;
+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
+ <85 IRQ_TYPE_LEVEL_HIGH>,
+ <84 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(gpio2): gpio@140 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x140>;
+ ngpios = <31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
+ interrupt-controller;
+ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ CP11X_LABEL(syscon1): system-controller@400000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x400000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP11X_LABEL(thermal): thermal-sensor@70 {
+ compatible = "marvell,armada-cp110-thermal";
+ reg = <0x70 0x10>;
+ interrupts-extended =
+ <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ CP11X_LABEL(usb3_0): usb@500000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x500000 0x4000>;
+ dma-coherent;
+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(usb3_1): usb@510000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x510000 0x4000>;
+ dma-coherent;
+ interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(sata0): sata@540000 {
+ compatible = "marvell,armada-8k-ahci";
+ reg = <0x540000 0x30000>;
+ dma-coherent;
+ clocks = <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata-port@0 {
+ interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0>;
+ };
+
+ sata-port@1 {
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <1>;
+ };
+ };
+
+ CP11X_LABEL(xor0): xor@6a0000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ };
+
+ CP11X_LABEL(xor1): xor@6c0000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ };
+
+ CP11X_LABEL(spi0): spi@700600 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700600 0x50>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clock-names = "core", "axi";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(spi1): spi@700680 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700680 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "core", "axi";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(i2c0): i2c@701000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(i2c1): i2c@701100 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart0): serial@702000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702000 0x100>;
+ reg-shift = <2>;
+ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart1): serial@702100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702100 0x100>;
+ reg-shift = <2>;
+ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart2): serial@702200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702200 0x100>;
+ reg-shift = <2>;
+ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart3): serial@702300 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702300 0x100>;
+ reg-shift = <2>;
+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(nand_controller): nand@720000 {
+ /*
+ * Due to the limitation of the pins available
+ * this controller is only usable on the CPM
+ * for A7K and on the CPS for A8K.
+ */
+ compatible = "marvell,armada-8k-nand-controller",
+ "marvell,armada370-nand-controller";
+ reg = <0x720000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(nand_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(trng): trng@760000 {
+ compatible = "marvell,armada-8k-rng",
+ "inside-secure,safexcel-eip76";
+ reg = <0x760000 0x7d>;
+ interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(x2core_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "okay";
+ };
+
+ CP11X_LABEL(sdhci0): sdhci@780000 {
+ compatible = "marvell,armada-cp110-sdhci";
+ reg = <0x780000 0x300>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "axi";
+ clocks = <&CP11X_LABEL(sdio_clk)>, <&CP11X_LABEL(core_clk)>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(crypto): crypto@800000 {
+ compatible = "inside-secure,safexcel-eip197b";
+ reg = <0x800000 0x200000>;
+ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
+ <88 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <90 IRQ_TYPE_LEVEL_HIGH>,
+ <91 IRQ_TYPE_LEVEL_HIGH>,
+ <92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mem", "ring0", "ring1",
+ "ring2", "ring3", "eip";
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(x2core_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ dma-coherent;
+ };
+ };
+
+ CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>,
+ <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ /* non-prefetchable memory */
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>, <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>,
+ <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ /* non-prefetchable memory */
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>, <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>,
+ <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ /* non-prefetchable memory */
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>, <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ /* 1 GHz fixed main PLL */
+ CP11X_LABEL(mainpll): CP11X_LABEL(mainpll) {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ CP11X_LABEL(x2core_clk): CP11X_LABEL(x2core_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ CP11X_LABEL(core_clk): CP11X_LABEL(core_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ CP11X_LABEL(sdio_clk): CP11X_LABEL(sdio_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <2>;
+ clock-div = <5>;
+ };
+
+ CP11X_LABEL(nand_clk): CP11X_LABEL(nand_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <2>;
+ clock-div = <5>;
+ };
+
+ CP11X_LABEL(ppv2_clk): CP11X_LABEL(ppv2_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <3>;
+ };
+
+ CP11X_LABEL(slow_io_clk): CP11X_LABEL(slow_io_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+};
--
2.29.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [edk2-non-osi PATCH 4/4] Marvell/OcteonTx: Update device trees
2021-03-18 19:57 [edk2-non-osi/edk2-platforms PATCH 0/4] Marvell SoCs device tree update Marcin Wojtas
` (2 preceding siblings ...)
2021-03-18 19:57 ` [edk2-non-osi PATCH 3/4] Marvell/Armada7k8k: Update device trees Marcin Wojtas
@ 2021-03-18 19:57 ` Marcin Wojtas
2021-04-15 19:00 ` [edk2-devel] [edk2-non-osi/edk2-platforms PATCH 0/4] Marvell SoCs device tree update Ard Biesheuvel
4 siblings, 0 replies; 7+ messages in thread
From: Marcin Wojtas @ 2021-03-18 19:57 UTC (permalink / raw)
To: devel; +Cc: leif, ard.biesheuvel, mw, jaz, kostap, upstream, jon
This patch updates the OcteonTx device trees to the version
found in Linux v5.11. All previous modifications, compared
to vanilla files, are kept, i.e. disabled SPI flashes & RTC
and fixed-clock tree.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9130DbA.inf | 2 +-
Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9131DbA.inf | 2 +-
Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9132DbA.inf | 2 +-
Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap806-quad.dtsi | 43 --
Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap807-quad.dtsi | 93 +++
Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap807.dtsi | 33 ++
Silicon/Marvell/OcteonTx/DeviceTree/T91/{armada-ap806.dtsi => armada-ap80x.dtsi} | 238 +++++++-
Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-common.dtsi | 3 +-
Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp110.dtsi | 552 -----------------
Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp115.dtsi | 12 +
Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp11x.dtsi | 622 ++++++++++++++++++++
Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130-db-A.dts | 185 ------
Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130-db.dts | 402 +++++++++++++
Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130.dtsi | 143 +----
Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9131-db-A.dts | 29 -
Silicon/Marvell/OcteonTx/DeviceTree/T91/{cn9131-db.dtsi => cn9131-db.dts} | 93 +--
Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db-A.dts | 70 ---
Silicon/Marvell/OcteonTx/DeviceTree/T91/{cn9132-db.dtsi => cn9132-db.dts} | 126 +++-
18 files changed, 1570 insertions(+), 1080 deletions(-)
delete mode 100644 Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap806-quad.dtsi
create mode 100644 Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap807-quad.dtsi
create mode 100644 Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap807.dtsi
rename Silicon/Marvell/OcteonTx/DeviceTree/T91/{armada-ap806.dtsi => armada-ap80x.dtsi} (52%)
delete mode 100644 Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp110.dtsi
create mode 100644 Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp115.dtsi
create mode 100644 Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp11x.dtsi
delete mode 100644 Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130-db-A.dts
create mode 100644 Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130-db.dts
delete mode 100644 Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9131-db-A.dts
rename Silicon/Marvell/OcteonTx/DeviceTree/T91/{cn9131-db.dtsi => cn9131-db.dts} (66%)
delete mode 100644 Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db-A.dts
rename Silicon/Marvell/OcteonTx/DeviceTree/T91/{cn9132-db.dtsi => cn9132-db.dts} (54%)
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9130DbA.inf b/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9130DbA.inf
index 091a5b4..dfc6c32 100644
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9130DbA.inf
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9130DbA.inf
@@ -16,7 +16,7 @@
VERSION_STRING = 1.0
[Sources]
- cn9130-db-A.dts
+ cn9130-db.dts
[Packages]
MdePkg/MdePkg.dec
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9131DbA.inf b/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9131DbA.inf
index 8108197..f5c26a8 100644
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9131DbA.inf
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9131DbA.inf
@@ -16,7 +16,7 @@
VERSION_STRING = 1.0
[Sources]
- cn9131-db-A.dts
+ cn9131-db.dts
[Packages]
MdePkg/MdePkg.dec
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9132DbA.inf b/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9132DbA.inf
index c9e3b04..2796541 100644
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9132DbA.inf
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9132DbA.inf
@@ -16,7 +16,7 @@
VERSION_STRING = 1.0
[Sources]
- cn9132-db-A.dts
+ cn9132-db.dts
[Packages]
MdePkg/MdePkg.dec
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap806-quad.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap806-quad.dtsi
deleted file mode 100644
index bae0ed9..0000000
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap806-quad.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for Marvell Armada AP806.
- */
-
-#include "armada-ap806.dtsi"
-
-/ {
- model = "Marvell Armada AP806 Quad";
- compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x000>;
- enable-method = "psci";
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x001>;
- enable-method = "psci";
- };
- cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x100>;
- enable-method = "psci";
- };
- cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x101>;
- enable-method = "psci";
- };
- };
-};
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap807-quad.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap807-quad.dtsi
new file mode 100644
index 0000000..6222569
--- /dev/null
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap807-quad.dtsi
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807 Quad
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#include "armada-ap807.dtsi"
+
+/ {
+ model = "Marvell Armada AP807 Quad";
+ compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x000>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_0>;
+ };
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x001>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_0>;
+ };
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x100>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 1>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_1>;
+ };
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x101>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 1>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_1>;
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+ };
+};
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap807.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap807.dtsi
new file mode 100644
index 0000000..b42dc3a
--- /dev/null
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap807.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#define AP_NAME ap807
+#include "armada-ap80x.dtsi"
+
+/ {
+ model = "Marvell Armada AP807";
+ compatible = "marvell,armada-ap807";
+};
+
+&ap_syscon0 {
+ ap_clk: clock {
+ compatible = "marvell,ap807-clock";
+ #clock-cells = <1>;
+ };
+};
+
+&ap_syscon1 {
+ cpu_clk: clock-cpu {
+ compatible = "marvell,ap807-cpu-clock";
+ clocks = <&ap_clk 0>, <&ap_clk 1>;
+ #clock-cells = <1>;
+ };
+};
+
+&ap_sdhci0 {
+ compatible = "marvell,armada-ap807-sdhci";
+};
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap806.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap80x.dtsi
similarity index 52%
rename from Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap806.dtsi
rename to Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap80x.dtsi
index 66124bf..c2a7cef 100644
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap806.dtsi
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-ap80x.dtsi
@@ -1,8 +1,8 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
*
- * Device Tree file for Marvell Armada AP806.
+ * Device Tree file for Marvell Armada AP80x.
*/
#define IRQ_TYPE_LEVEL_HIGH (1 << 2)
@@ -14,11 +14,12 @@
#define GIC_CPU_MASK_RAW(x) ((x) << 8)
#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
+#define GPIO_ACTIVE_HIGH 0
+#define GPIO_ACTIVE_LOW 1
+
/dts-v1/;
/ {
- model = "Marvell Armada AP806";
- compatible = "marvell,armada-ap806";
#address-cells = <2>;
#size-cells = <2>;
@@ -34,7 +35,24 @@
method = "smc";
};
- ap806 {
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /*
+ * This area matches the mapping done with a
+ * mainline U-Boot, and should be updated by the
+ * bootloader.
+ */
+
+ psci-area@4000000 {
+ reg = <0x0 0x4000000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ AP_NAME {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
@@ -47,6 +65,24 @@
compatible = "simple-bus";
ranges = <0x0 0x0 0xf0000000 0x1000000>;
+ smmu: iommu@5000000 {
+ compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
+ reg = <0x100000 0x100000>;
+ dma-coherent;
+ #iommu-cells = <1>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@210000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -131,6 +167,15 @@
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
+ sei: interrupt-controller@3f0200 {
+ compatible = "marvell,ap806-sei";
+ reg = <0x3f0200 0x40>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ };
+
xor@400000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x400000 0x1000>,
@@ -183,7 +228,6 @@
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- timeout-ms = <1000>;
clocks = <&ap_clk 3>;
status = "disabled";
};
@@ -226,15 +270,10 @@
status = "disabled";
};
- ap_syscon: system-controller@6f4000 {
+ ap_syscon0: system-controller@6f4000 {
compatible = "syscon", "simple-mfd";
reg = <0x6f4000 0x2000>;
- ap_clk: clock {
- compatible = "marvell,ap806-clock";
- #clock-cells = <1>;
- };
-
ap_pinctrl: pinctrl {
compatible = "marvell,ap806-pinctrl";
@@ -254,10 +293,177 @@
};
};
- ap_thermal: thermal@6f808c {
- compatible = "marvell,armada-ap806-thermal";
- reg = <0x6f808c 0x4>,
- <0x6f8084 0x8>;
+ ap_syscon1: system-controller@6f8000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x6f8000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ap_thermal: thermal-sensor@80 {
+ compatible = "marvell,armada-ap806-thermal";
+ reg = <0x80 0x10>;
+ interrupt-parent = <&sei>;
+ interrupts = <18>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+ };
+ };
+
+ /*
+ * The thermal IP features one internal sensor plus, if applicable, one
+ * remote channel wired to one sensor per CPU.
+ *
+ * Only one thermal zone per AP/CP may trigger interrupts at a time, the
+ * first one that will have a critical trip point will be chosen.
+ */
+ thermal-zones {
+ ap_thermal_ic: ap-thermal-ic {
+ polling-delay-passive = <0>; /* Interrupt driven */
+ polling-delay = <0>; /* Interrupt driven */
+
+ thermal-sensors = <&ap_thermal 0>;
+
+ trips {
+ ap_crit: ap-crit {
+ temperature = <100000>; /* mC degrees */
+ hysteresis = <2000>; /* mC degrees */
+ type = "critical";
+ };
+ };
+
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu0: ap-thermal-cpu0 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 1>;
+
+ trips {
+ cpu0_hot: cpu0-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu0_emerg: cpu0-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0_hot: map0-hot {
+ trip = <&cpu0_hot>;
+ cooling-device = <&cpu0 1 2>,
+ <&cpu1 1 2>;
+ };
+ map0_emerg: map0-ermerg {
+ trip = <&cpu0_emerg>;
+ cooling-device = <&cpu0 3 3>,
+ <&cpu1 3 3>;
+ };
+ };
+ };
+
+ ap_thermal_cpu1: ap-thermal-cpu1 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 2>;
+
+ trips {
+ cpu1_hot: cpu1-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu1_emerg: cpu1-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map1_hot: map1-hot {
+ trip = <&cpu1_hot>;
+ cooling-device = <&cpu0 1 2>,
+ <&cpu1 1 2>;
+ };
+ map1_emerg: map1-emerg {
+ trip = <&cpu1_emerg>;
+ cooling-device = <&cpu0 3 3>,
+ <&cpu1 3 3>;
+ };
+ };
+ };
+
+ ap_thermal_cpu2: ap-thermal-cpu2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 3>;
+
+ trips {
+ cpu2_hot: cpu2-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu2_emerg: cpu2-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map2_hot: map2-hot {
+ trip = <&cpu2_hot>;
+ cooling-device = <&cpu2 1 2>,
+ <&cpu3 1 2>;
+ };
+ map2_emerg: map2-emerg {
+ trip = <&cpu2_emerg>;
+ cooling-device = <&cpu2 3 3>,
+ <&cpu3 3 3>;
+ };
+ };
+ };
+
+ ap_thermal_cpu3: ap-thermal-cpu3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 4>;
+
+ trips {
+ cpu3_hot: cpu3-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu3_emerg: cpu3-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map3_hot: map3-bhot {
+ trip = <&cpu3_hot>;
+ cooling-device = <&cpu2 1 2>,
+ <&cpu3 1 2>;
+ };
+ map3_emerg: map3-emerg {
+ trip = <&cpu3_emerg>;
+ cooling-device = <&cpu2 3 3>,
+ <&cpu3 3 3>;
+ };
};
};
};
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-common.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-common.dtsi
index 8b610fd..f002499 100644
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-common.dtsi
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-common.dtsi
@@ -6,5 +6,6 @@
/* Common definitions used by Armada 7K/8K DTs */
#define PASTER(x, y) x ## y
#define EVALUATOR(x, y) PASTER(x, y)
-#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
+#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name))
+#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name))
#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp110.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp110.dtsi
deleted file mode 100644
index b6e5ded..0000000
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp110.dtsi
+++ /dev/null
@@ -1,552 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for Marvell Armada CP110.
- */
-
-#include "armada-common.dtsi"
-
-#define ICU_GRP_NSR 0x0
-#define ICU_GRP_SR 0x1
-#define ICU_GRP_SEI 0x4
-#define ICU_GRP_REI 0x5
-
-#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
-
-/ {
- /*
- * The contents of the node are defined below, in order to
- * save one indentation level
- */
- CP110_NAME: CP110_NAME { };
-};
-
-&CP110_NAME {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&CP110_LABEL(icu)>;
- ranges;
-
- config-space@CP110_BASE {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
-
- CP110_LABEL(ethernet): ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
- <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- clock-names = "pp_clk", "gop_clk",
- "mg_clk", "mg_core_clk", "axi_clk";
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- status = "disabled";
- dma-coherent;
-
- CP110_LABEL(eth0): eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <0>;
- gop-port-id = <0>;
- status = "disabled";
- };
-
- CP110_LABEL(eth1): eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <1>;
- gop-port-id = <2>;
- status = "disabled";
- };
-
- CP110_LABEL(eth2): eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <2>;
- gop-port-id = <3>;
- status = "disabled";
- };
- };
-
- CP110_LABEL(comphy): phy@120000 {
- compatible = "marvell,comphy-cp110";
- reg = <0x120000 0x6000>;
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- CP110_LABEL(comphy0): phy@0 {
- reg = <0>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy1): phy@1 {
- reg = <1>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy2): phy@2 {
- reg = <2>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy3): phy@3 {
- reg = <3>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy4): phy@4 {
- reg = <4>;
- #phy-cells = <1>;
- };
-
- CP110_LABEL(comphy5): phy@5 {
- reg = <5>;
- #phy-cells = <1>;
- };
- };
-
- CP110_LABEL(mdio): mdio@12a200 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
- reg = <0x12a200 0x10>;
- clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
- <&CP110_LABEL(core_clk)>, <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(xmdio): mdio@12a600 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,xmdio";
- reg = <0x12a600 0x10>;
- clocks = <&CP110_LABEL(ppv2_clk)>, <&CP110_LABEL(ppv2_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(icu): interrupt-controller@1e0000 {
- compatible = "marvell,cp110-icu";
- reg = <0x1e0000 0x440>;
- #interrupt-cells = <3>;
- interrupt-controller;
- msi-parent = <&gicp>;
- };
-
- CP110_LABEL(rtc): rtc@284000 {
- compatible = "marvell,armada-8k-rtc";
- reg = <0x284000 0x20>, <0x284080 0x24>;
- reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- CP110_LABEL(thermal): thermal@400078 {
- compatible = "marvell,armada-cp110-thermal";
- reg = <0x400078 0x4>,
- <0x400070 0x8>;
- };
-
- CP110_LABEL(syscon0): system-controller@440000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x440000 0x2000>;
-
- CP110_LABEL(clk): clock {
- compatible = "marvell,cp110-clock";
- status = "disabled";
- #clock-cells = <2>;
- };
-
- CP110_LABEL(gpio1): gpio@100 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x100>;
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
- interrupt-controller;
- interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- CP110_LABEL(gpio2): gpio@140 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x140>;
- ngpios = <31>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
- interrupt-controller;
- interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
- };
-
- CP110_LABEL(usb3_0): usb3@500000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x500000 0x4000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(usb3_1): usb3@510000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x510000 0x4000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(sata0): sata@540000 {
- compatible = "marvell,armada-8k-ahci",
- "generic-ahci";
- reg = <0x540000 0x30000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(xor0): xor@6a0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- };
-
- CP110_LABEL(xor1): xor@6c0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- };
-
- CP110_LABEL(spi0): spi@700600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700600 0x50>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(spi1): spi@700680 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700680 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(i2c0): i2c@701000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(i2c1): i2c@701100 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701100 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart0): serial@702000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702000 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart1): serial@702100 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702100 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart2): serial@702200 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702200 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(uart3): serial@702300 {
- compatible = "snps,dw-apb-uart";
- reg = <0x702300 0x100>;
- reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clock-names = "baudclk", "apb_pclk";
- clocks = <&CP110_LABEL(slow_io_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(nand_controller): nand@720000 {
- /*
- * Due to the limitation of the pins available
- * this controller is only usable on the CPM
- * for A7K and on the CPS for A8K.
- */
- compatible = "marvell,armada-8k-nand-controller",
- "marvell,armada370-nand-controller";
- reg = <0x720000 0x54>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(nand_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- marvell,system-controller = <&CP110_LABEL(syscon0)>;
- status = "disabled";
- };
-
- CP110_LABEL(trng): trng@760000 {
- compatible = "marvell,armada-8k-rng",
- "inside-secure,safexcel-eip76";
- reg = <0x760000 0x7d>;
- interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(x2core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- status = "okay";
- };
-
- CP110_LABEL(sdhci0): sdhci@780000 {
- compatible = "marvell,armada-cp110-sdhci";
- reg = <0x780000 0x300>;
- interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "axi";
- clocks = <&CP110_LABEL(sdio_clk)>, <&CP110_LABEL(core_clk)>;
- dma-coherent;
- status = "disabled";
- };
-
- CP110_LABEL(crypto): crypto@800000 {
- compatible = "inside-secure,safexcel-eip197";
- reg = <0x800000 0x200000>;
- interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mem", "ring0", "ring1",
- "ring2", "ring3", "eip";
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(x2core_clk)>,
- <&CP110_LABEL(x2core_clk)>;
- dma-coherent;
- };
- };
-
- CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* non-prefetchable memory */
- <0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* non-prefetchable memory */
- <0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
- <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* non-prefetchable memory */
- <0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clock-names = "core", "reg";
- clocks = <&CP110_LABEL(core_clk)>, <&CP110_LABEL(x2core_clk)>;
- status = "disabled";
- };
-
- /* 1 GHz fixed main PLL */
- CP110_LABEL(mainpll): CP110_LABEL(mainpll) {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000000>;
- };
-
- CP110_LABEL(x2core_clk): CP110_LABEL(x2core_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <2>;
- };
-
- CP110_LABEL(core_clk): CP110_LABEL(core_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <2>;
- };
-
- CP110_LABEL(sdio_clk): CP110_LABEL(sdio_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <2>;
- clock-div = <5>;
- };
-
- CP110_LABEL(nand_clk): CP110_LABEL(nand_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <2>;
- clock-div = <5>;
- };
-
- CP110_LABEL(ppv2_clk): CP110_LABEL(ppv2_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <3>;
- };
-
- CP110_LABEL(slow_io_clk): CP110_LABEL(slow_io_clk) {
- compatible = "fixed-factor-clock";
- clocks = <&CP110_LABEL(mainpll)>;
- #clock-cells = <0>;
- clock-mult = <1>;
- clock-div = <4>;
- };
-};
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp115.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp115.dtsi
new file mode 100644
index 0000000..f57860f
--- /dev/null
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp115.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP115.
+ */
+
+#define CP11X_TYPE cp115
+
+#include "armada-cp11x.dtsi"
+
+#undef CP11X_TYPE
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp11x.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp11x.dtsi
new file mode 100644
index 0000000..05b7627
--- /dev/null
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/armada-cp11x.dtsi
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP11x.
+ */
+
+#include "armada-common.dtsi"
+
+#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface))
+
+/ {
+ /*
+ * The contents of the node are defined below, in order to
+ * save one indentation level
+ */
+ CP11X_NAME: CP11X_NAME { };
+
+ /*
+ * CPs only have one sensor in the thermal IC.
+ *
+ * The cooling maps are empty as there are no cooling devices.
+ */
+ thermal-zones {
+ CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
+ polling-delay-passive = <0>; /* Interrupt driven */
+ polling-delay = <0>; /* Interrupt driven */
+
+ thermal-sensors = <&CP11X_LABEL(thermal) 0>;
+
+ trips {
+ CP11X_LABEL(crit): crit {
+ temperature = <100000>; /* mC degrees */
+ hysteresis = <2000>; /* mC degrees */
+ type = "critical";
+ };
+ };
+
+ cooling-maps { };
+ };
+ };
+};
+
+&CP11X_NAME {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
+ ranges;
+
+ config-space@CP11X_BASE {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
+
+ CP11X_LABEL(ethernet): ethernet@0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>;
+ clocks = <&CP11X_LABEL(ppv2_clk)>, <&CP11X_LABEL(ppv2_clk)>,
+ <&CP11X_LABEL(ppv2_clk)>, <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ clock-names = "pp_clk", "gop_clk",
+ "mg_clk", "mg_core_clk", "axi_clk";
+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+ status = "disabled";
+ dma-coherent;
+
+ CP11X_LABEL(eth0): eth0 {
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
+ <43 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <51 IRQ_TYPE_LEVEL_HIGH>,
+ <55 IRQ_TYPE_LEVEL_HIGH>,
+ <59 IRQ_TYPE_LEVEL_HIGH>,
+ <63 IRQ_TYPE_LEVEL_HIGH>,
+ <67 IRQ_TYPE_LEVEL_HIGH>,
+ <71 IRQ_TYPE_LEVEL_HIGH>,
+ <129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
+ port-id = <0>;
+ gop-port-id = <0>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(eth1): eth1 {
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
+ <44 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>,
+ <52 IRQ_TYPE_LEVEL_HIGH>,
+ <56 IRQ_TYPE_LEVEL_HIGH>,
+ <60 IRQ_TYPE_LEVEL_HIGH>,
+ <64 IRQ_TYPE_LEVEL_HIGH>,
+ <68 IRQ_TYPE_LEVEL_HIGH>,
+ <72 IRQ_TYPE_LEVEL_HIGH>,
+ <128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
+ port-id = <1>;
+ gop-port-id = <2>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(eth2): eth2 {
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
+ <45 IRQ_TYPE_LEVEL_HIGH>,
+ <49 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>,
+ <57 IRQ_TYPE_LEVEL_HIGH>,
+ <61 IRQ_TYPE_LEVEL_HIGH>,
+ <65 IRQ_TYPE_LEVEL_HIGH>,
+ <69 IRQ_TYPE_LEVEL_HIGH>,
+ <73 IRQ_TYPE_LEVEL_HIGH>,
+ <127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
+ port-id = <2>;
+ gop-port-id = <3>;
+ status = "disabled";
+ };
+ };
+
+ CP11X_LABEL(comphy): phy@120000 {
+ compatible = "marvell,comphy-cp110";
+ reg = <0x120000 0x6000>;
+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+ clocks = <&CP11X_LABEL(ppv2_clk)>, <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ clock-names = "mg_clk", "mg_core_clk", "axi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CP11X_LABEL(comphy0): phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy1): phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy2): phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy3): phy@3 {
+ reg = <3>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy4): phy@4 {
+ reg = <4>;
+ #phy-cells = <1>;
+ };
+
+ CP11X_LABEL(comphy5): phy@5 {
+ reg = <5>;
+ #phy-cells = <1>;
+ };
+ };
+
+ CP11X_LABEL(mdio): mdio@12a200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x12a200 0x10>;
+ clocks = <&CP11X_LABEL(ppv2_clk)>, <&CP11X_LABEL(ppv2_clk)>,
+ <&CP11X_LABEL(core_clk)>, <&CP11X_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(xmdio): mdio@12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x10>;
+ clocks = <&CP11X_LABEL(ppv2_clk)>, <&CP11X_LABEL(ppv2_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(icu): interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x440>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP11X_LABEL(icu_nsr): interrupt-controller@10 {
+ compatible = "marvell,cp110-icu-nsr";
+ reg = <0x10 0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
+
+ CP11X_LABEL(icu_sei): interrupt-controller@50 {
+ compatible = "marvell,cp110-icu-sei";
+ reg = <0x50 0x10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&sei>;
+ };
+ };
+
+ CP11X_LABEL(rtc): rtc@284000 {
+ compatible = "marvell,armada-8k-rtc";
+ reg = <0x284000 0x20>, <0x284080 0x24>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(syscon0): system-controller@440000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x440000 0x2000>;
+
+ CP11X_LABEL(clk): clock {
+ compatible = "marvell,cp110-clock";
+ status = "disabled";
+ #clock-cells = <2>;
+ };
+
+ CP11X_LABEL(gpio1): gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
+ interrupt-controller;
+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
+ <85 IRQ_TYPE_LEVEL_HIGH>,
+ <84 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(gpio2): gpio@140 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x140>;
+ ngpios = <31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
+ interrupt-controller;
+ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ CP11X_LABEL(syscon1): system-controller@400000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x400000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP11X_LABEL(thermal): thermal-sensor@70 {
+ compatible = "marvell,armada-cp110-thermal";
+ reg = <0x70 0x10>;
+ interrupts-extended =
+ <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ CP11X_LABEL(usb3_0): usb@500000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x500000 0x4000>;
+ dma-coherent;
+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(usb3_1): usb@510000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x510000 0x4000>;
+ dma-coherent;
+ interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(sata0): sata@540000 {
+ compatible = "marvell,armada-8k-ahci";
+ reg = <0x540000 0x30000>;
+ dma-coherent;
+ clocks = <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(core_clk)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata-port@0 {
+ interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0>;
+ };
+
+ sata-port@1 {
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <1>;
+ };
+ };
+
+ CP11X_LABEL(xor0): xor@6a0000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ };
+
+ CP11X_LABEL(xor1): xor@6c0000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ };
+
+ CP11X_LABEL(spi0): spi@700600 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700600 0x50>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clock-names = "core", "axi";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(spi1): spi@700680 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700680 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "core", "axi";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(i2c0): i2c@701000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(i2c1): i2c@701100 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart0): serial@702000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702000 0x100>;
+ reg-shift = <2>;
+ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart1): serial@702100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702100 0x100>;
+ reg-shift = <2>;
+ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart2): serial@702200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702200 0x100>;
+ reg-shift = <2>;
+ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(uart3): serial@702300 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x702300 0x100>;
+ reg-shift = <2>;
+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&CP11X_LABEL(slow_io_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(nand_controller): nand@720000 {
+ /*
+ * Due to the limitation of the pins available
+ * this controller is only usable on the CPM
+ * for A7K and on the CPS for A8K.
+ */
+ compatible = "marvell,armada-8k-nand-controller",
+ "marvell,armada370-nand-controller";
+ reg = <0x720000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(nand_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(trng): trng@760000 {
+ compatible = "marvell,armada-8k-rng",
+ "inside-secure,safexcel-eip76";
+ reg = <0x760000 0x7d>;
+ interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(x2core_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ status = "okay";
+ };
+
+ CP11X_LABEL(sdhci0): sdhci@780000 {
+ compatible = "marvell,armada-cp110-sdhci";
+ reg = <0x780000 0x300>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "axi";
+ clocks = <&CP11X_LABEL(sdio_clk)>, <&CP11X_LABEL(core_clk)>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(crypto): crypto@800000 {
+ compatible = "inside-secure,safexcel-eip197b";
+ reg = <0x800000 0x200000>;
+ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
+ <88 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <90 IRQ_TYPE_LEVEL_HIGH>,
+ <91 IRQ_TYPE_LEVEL_HIGH>,
+ <92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mem", "ring0", "ring1",
+ "ring2", "ring3", "eip";
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(x2core_clk)>,
+ <&CP11X_LABEL(x2core_clk)>;
+ dma-coherent;
+ };
+ };
+
+ CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>,
+ <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ /* non-prefetchable memory */
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>, <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>,
+ <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ /* non-prefetchable memory */
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>, <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>,
+ <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ /* non-prefetchable memory */
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clock-names = "core", "reg";
+ clocks = <&CP11X_LABEL(core_clk)>, <&CP11X_LABEL(x2core_clk)>;
+ status = "disabled";
+ };
+
+ /* 1 GHz fixed main PLL */
+ CP11X_LABEL(mainpll): CP11X_LABEL(mainpll) {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ CP11X_LABEL(x2core_clk): CP11X_LABEL(x2core_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ CP11X_LABEL(core_clk): CP11X_LABEL(core_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ CP11X_LABEL(sdio_clk): CP11X_LABEL(sdio_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <2>;
+ clock-div = <5>;
+ };
+
+ CP11X_LABEL(nand_clk): CP11X_LABEL(nand_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <2>;
+ clock-div = <5>;
+ };
+
+ CP11X_LABEL(ppv2_clk): CP11X_LABEL(ppv2_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <3>;
+ };
+
+ CP11X_LABEL(slow_io_clk): CP11X_LABEL(slow_io_clk) {
+ compatible = "fixed-factor-clock";
+ clocks = <&CP11X_LABEL(mainpll)>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+};
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130-db-A.dts b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130-db-A.dts
deleted file mode 100644
index 9e4aa51..0000000
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130-db-A.dts
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Copyright (C) 2018 Marvell International Ltd.
- *
- * SPDX-License-Identifier: GPL-2.0
- * https://spdx.org/licenses
- */
-
-#include "cn9130-db.dtsi"
-
-/ {
- model = "Model: Marvell CN9130 development board (CP NOR) setup(A)";
- compatible = "marvell,cn9130-db-A", "marvell,armada-ap807-quad",
- "marvell,armada-ap807";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- i2c0 = &cp0_i2c0;
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- };
-
- memory@00000000 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-/* on-board eMMC - U9 */
-&ap_sdhci0 {
- pinctrl-names = "default";
- bus-width = <8>;
- status = "okay";
- vqmmc-supply = <&ap0_reg_sd_vccq>;
-};
-
-/*
- * CP related configuration
- */
-&cp0_i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&cp0_i2c1 {
- status = "okay";
-};
-
-/* CON 28 */
-&cp0_sdhci0 {
- status = "okay";
-};
-
-/* U54 */
-&cp0_nand_controller {
- pinctrl-names = "default";
- pinctrl-0 = <&nand_pins>;
-
- nand@0 {
- reg = <0>;
- label = "main-storage";
- nand-rb = <0>;
- nand-ecc-mode = "hw";
- nand-on-flash-bbt;
- nand-ecc-strength = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@200000 {
- label = "Linux";
- reg = <0x200000 0xd00000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
- };
-};
-
-/* U55 */
-&cp0_spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi0_pins>;
- reg = <0x700680 0x50>, /* control */
- <0x2000000 0x1000000>; /* CS0 */
- status = "disabled";
-
- spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- /* On-board MUX does not allow higher frequencies */
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x200000>;
- };
-
- partition@400000 {
- label = "Filesystem";
- reg = <0x200000 0xe00000>;
- };
- };
- };
-};
-
-/* SLM-1521-V2, CON6 */
-&cp0_pcie0 {
- status = "okay";
- num-lanes = <4>;
- num-viewport = <8>;
- /* Generic PHY, providing serdes lanes */
- phys = <&cp0_comphy0 0
- &cp0_comphy1 0
- &cp0_comphy2 0
- &cp0_comphy3 0>;
-};
-
-&cp0_sata0 {
- status = "okay";
- /* SLM-1521-V2, CON2 */
-};
-
-&cp0_mdio {
- status = "okay";
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-/* SLM-1521-V2, CON9 */
-&cp0_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp0_comphy4 0>;
- managed = "in-band-status";
- sfp = <&cp0_sfp_eth0>;
-};
-
-/* CON56 */
-&cp0_eth1 {
- status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
-};
-
-/* CON57 */
-&cp0_eth2 {
- status = "okay";
- phy = <&phy1>;
- phy-mode = "rgmii-id";
-};
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130-db.dts b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130-db.dts
new file mode 100644
index 0000000..747bf88
--- /dev/null
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130-db.dts
@@ -0,0 +1,402 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB board.
+ */
+
+#include "cn9130.dtsi"
+
+/ {
+ model = "Marvell Armada CN9130-DB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ i2c0 = &cp0_i2c0;
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ spi1 = &cp0_spi0;
+ spi2 = &cp0_spi1;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ ap0_reg_sd_vccq: ap0_sd_vccq@0 {
+ compatible = "regulator-gpio";
+ regulator-name = "ap0_sd_vccq";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1 3300000 0x0>;
+ };
+
+ cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp0-xhci0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp0_usb3_0_phy0: cp0_usb3_phy@0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp0_reg_usb3_vbus0>;
+ };
+
+ cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp0-xhci1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp0_reg_usb3_vbus1>;
+ };
+
+ cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+ compatible = "regulator-gpio";
+ regulator-name = "cp0_sd_vccq";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ };
+
+ cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp0_sd_vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ cp0_sfp_eth0: sfp-eth@0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp0_sfpp0_i2c>;
+ los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
+ /*
+ * SFP cages are unconnected on early PCBs because of an the I2C
+ * lanes not being connected. Prevent the port for being
+ * unusable by disabling the SFP node.
+ */
+ status = "disabled";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ vqmmc-supply = <&ap0_reg_sd_vccq>;
+ status = "okay";
+};
+
+&cp0_crypto {
+ status = "disabled";
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+ status = "disabled";
+ phy-mode = "10gbase-kr";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy4 0>;
+ managed = "in-band-status";
+ sfp = <&cp0_sfp_eth0>;
+};
+
+/* CON56 */
+&cp0_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+/* CON57 */
+&cp0_eth2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+};
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ clock-frequency = <100000>;
+
+ /* U36 */
+ expander0: pca953x@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ status = "okay";
+ };
+
+ /* U42 */
+ eeprom0: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <0x20>;
+ };
+
+ /* U38 */
+ eeprom1: eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <0x20>;
+ };
+};
+
+&cp0_i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* SLM-1521-V2 - U3 */
+ i2c-mux@72 { /* verify address - depends on dpr */
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ cp0_sfpp0_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* U12 */
+ cp0_module_expander1: pca9555@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ };
+
+ };
+ };
+};
+
+&cp0_mdio {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+/* U54 */
+&cp0_nand_controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins &nand_rb>;
+
+ nand@0 {
+ reg = <0>;
+ label = "main-storage";
+ nand-rb = <0>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition@200000 {
+ label = "Linux";
+ reg = <0x200000 0xd00000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+ status = "okay";
+ num-lanes = <4>;
+ num-viewport = <8>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy0 0
+ &cp0_comphy1 0
+ &cp0_comphy2 0
+ &cp0_comphy3 0>;
+};
+
+&cp0_sata0 {
+ status = "okay";
+
+ /* SLM-1521-V2, CON2 */
+ sata-port@1 {
+ status = "okay";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy5 1>;
+ };
+};
+
+/* CON 28 */
+&cp0_sdhci0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sdhci_pins
+ &cp0_sdhci_cd_pins>;
+ bus-width = <4>;
+ cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ vqmmc-supply = <&cp0_reg_sd_vccq>;
+ vmmc-supply = <&cp0_reg_sd_vcc>;
+};
+
+/* U55 */
+&cp0_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi0_pins>;
+ reg = <0x700680 0x50>;
+
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ /* On-board MUX does not allow higher frequencies */
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot-0";
+ reg = <0x0 0x200000>;
+ };
+
+ partition@400000 {
+ label = "Filesystem-0";
+ reg = <0x200000 0xe00000>;
+ };
+ };
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = "mpp0", "mpp1", "mpp2",
+ "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = "mpp44", "mpp45", "mpp46",
+ "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52",
+ "mpp53", "mpp54", "mpp55";
+ marvell,function = "ge1";
+ };
+ cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ cp0_sdhci_pins: cp0-sdhi-pins-0 {
+ marvell,pins = "mpp56", "mpp57", "mpp58",
+ "mpp59", "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ nand_pins: nand-pins {
+ marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18",
+ "mpp19", "mpp20", "mpp21", "mpp22",
+ "mpp23", "mpp24", "mpp25", "mpp26",
+ "mpp27";
+ marvell,function = "dev";
+ };
+ nand_rb: nand-rb {
+ marvell,pins = "mpp13";
+ marvell,function = "nf";
+ };
+ };
+};
+
+&cp0_usb3_0 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy0>;
+ phy-names = "usb";
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy1>;
+ phy-names = "usb";
+};
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130.dtsi
index 97ea923..6187a34 100644
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130.dtsi
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9130.dtsi
@@ -1,126 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (C) 2018 Marvell International Ltd.
+ * Copyright (C) 2019 Marvell International Ltd.
*
- * SPDX-License-Identifier: GPL-2.0
- * https://spdx.org/licenses
+ * Device tree for the CN9130 SoC.
*/
-/*
- * Device Tree file for the CN 9130 SoC, made of an AP807 Quad and
- * three CP110.
- */
-
-#include "armada-ap806-quad.dtsi"
-
-/ {
- aliases {
- gpio1 = &cp0_gpio1;
- gpio2 = &cp0_gpio2;
- spi1 = &cp0_spi0;
- spi2 = &cp0_spi1;
- };
-};
-
-/* This defines used to calculate the base address of each CP */
-#define CP110_PCIE_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000)
-#define CP110_PCIE_BUS_MEM_CFG (0x82000000)
-
-/* CP110-0 Settings */
-#define CP110_NAME cp0
-#define CP110_NUM 0
-#define CP110_BASE f2000000
-#define CP110_PCIE0_BASE f2600000
-#define CP110_PCIE1_BASE f2620000
-#define CP110_PCIE2_BASE f2640000
-#define CP110_PCIEx_CPU_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \
- (0xe0000000 + (iface - 1) * 0x1000000))
-#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIEx_CPU_MEM_BASE(iface))
-
-#include "armada-cp110.dtsi"
-
-#undef CP110_NUM
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#include "armada-ap807-quad.dtsi"
/ {
- model = "Marvell CN 9130";
+ model = "Marvell Armada CN9130 SoC";
compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
- "marvell,armada-ap806";
+ "marvell,armada-ap807";
};
-&cp0_crypto {
- status = "okay";
-};
-
-&cp0_gpio1 {
- status = "okay";
-};
-
-&cp0_gpio2 {
- status = "okay";
-};
-
-&cp0_syscon0 {
- cp0_pinctrl: pinctrl {
- compatible = "marvell,armada-7k-pinctrl";
-
- cp0_devbus_pins: cp0-devbus-pins {
- marvell,pins = "mpp15", "mpp16", "mpp17",
- "mpp18", "mpp19", "mpp20",
- "mpp21", "mpp22", "mpp23",
- "mpp24", "mpp25", "mpp26",
- "mpp27";
- marvell,function = "dev";
- };
+/*
+ * Instantiate the internal CP115
+ */
- cp0_i2c0_pins: cp0-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp0_i2c1_pins: cp0-i2c-pins-1 {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
- cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
- marvell,pins = "mpp0", "mpp1", "mpp2",
- "mpp3", "mpp4", "mpp5",
- "mpp6", "mpp7", "mpp8",
- "mpp9", "mpp10", "mpp11";
- marvell,function = "ge0";
- };
- cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
- marvell,pins = "mpp44", "mpp45", "mpp46",
- "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52",
- "mpp53", "mpp54", "mpp55";
- marvell,function = "ge1";
- };
- cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 {
- marvell,pins = "mpp43";
- marvell,function = "gpio";
- };
- cp0_sdhci_pins: cp0-sdhi-pins-0 {
- marvell,pins = "mpp56", "mpp57", "mpp58",
- "mpp59", "mpp60", "mpp61";
- marvell,function = "sdio";
- };
- cp0_spi0_pins: cp0-spi-pins-0 {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- nand_pins: nand-pins {
- marvell,pins =
- "mpp15", "mpp16", "mpp17", "mpp18", "mpp19",
- "mpp20", "mpp21", "mpp22", "mpp23", "mpp24",
- "mpp25", "mpp26", "mpp27";
- marvell,function = "dev";
- };
- nand_rb: nand-rb {
- marvell,pins = "mpp13";
- marvell,function = "nf";
- };
- };
-};
+#define CP11X_NAME cp0
+#define CP11X_BASE f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \
+ 0xe0000000 + ((iface - 1) * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000)
+#define CP11X_PCIE0_BASE f2600000
+#define CP11X_PCIE1_BASE f2620000
+#define CP11X_PCIE2_BASE f2640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9131-db-A.dts b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9131-db-A.dts
deleted file mode 100644
index f08a748..0000000
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9131-db-A.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2018 Marvell International Ltd.
- *
- * SPDX-License-Identifier: GPL-2.0
- * https://spdx.org/licenses
- */
-
-#include "cn9130-db-A.dts"
-#include "cn9131-db.dtsi"
-
-/ {
- model = "Marvell CN9131 development board (CP NOR) setup(A)";
- compatible = "marvell,cn9131-db-A", "marvell,armada-ap807-quad",
- "marvell,armada-ap807";
-};
-
-&cp1_ethernet {
- status = "okay";
-};
-
-/* CON50 */
-&cp1_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy4 0>;
- managed = "in-band-status";
- sfp = <&cp1_sfp_eth1>;
-};
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9131-db.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9131-db.dts
similarity index 66%
rename from Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9131-db.dtsi
rename to Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9131-db.dts
index 9c9dfb6..a321810 100644
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9131-db.dtsi
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9131-db.dts
@@ -1,35 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (C) 2018 Marvell International Ltd.
+ * Copyright (C) 2019 Marvell International Ltd.
*
- * SPDX-License-Identifier: GPL-2.0
- * https://spdx.org/licenses
+ * Device tree for the CN9131-DB board.
*/
-#undef CP110_NUM
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
-#undef CP110_PCIEx_CPU_MEM_BASE
-#undef CP110_PCIEx_MEM_BASE
-
-/* CP110-1 Settings */
-#define CP110_NAME cp1
-#define CP110_NUM 1
-#define CP110_BASE f4000000
-#define CP110_PCIE0_BASE f4600000
-#define CP110_PCIE1_BASE f4620000
-#define CP110_PCIE2_BASE f4640000
-#define CP110_PCIEx_CPU_MEM_BASE(iface) (0xe2000000 + (iface) * 0x1000000)
-#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIEx_CPU_MEM_BASE(iface))
-
-#include "armada-cp110.dtsi"
+#include "cn9130-db.dts"
/ {
- model = "Marvell CN9131 development board";
- compatible = "marvell,cn9131-db", "marvell,armada-ap807-quad",
- "marvell,armada-ap807";
+ model = "Marvell Armada CN9131-DB";
+ compatible = "marvell,cn9131", "marvell,cn9130",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
aliases {
gpio3 = &cp1_gpio1;
@@ -63,14 +44,55 @@
tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_sfp_pins>;
+ /*
+ * SFP cages are unconnected on early PCBs because of an the I2C
+ * lanes not being connected. Prevent the port for being
+ * unusable by disabling the SFP node.
+ */
status = "disabled";
};
};
+/*
+ * Instantiate the first slave CP115
+ */
+
+#define CP11X_NAME cp1
+#define CP11X_BASE f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f4600000
+#define CP11X_PCIE1_BASE f4620000
+#define CP11X_PCIE2_BASE f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
&cp1_crypto {
+ status = "disabled";
+};
+
+&cp1_ethernet {
status = "okay";
};
+/* CON50 */
+&cp1_eth0 {
+ status = "disabled";
+ phy-mode = "10gbase-kr";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy4 0>;
+ managed = "in-band-status";
+ sfp = <&cp1_sfp_eth1>;
+};
+
&cp1_gpio1 {
status = "okay";
};
@@ -80,9 +102,9 @@
};
&cp1_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&cp1_i2c0_pins>;
- status = "okay";
clock-frequency = <100000>;
};
@@ -101,15 +123,20 @@
&cp1_sata0 {
status = "okay";
+
+ /* CON32 */
+ sata-port@1 {
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy5 1>;
+ };
};
/* U24 */
&cp1_spi1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&cp1_spi0_pins>;
- reg = <0x700680 0x50>, /* control */
- <0x2000000 0x1000000>; /* CS0 */
- status = "okay";
+ reg = <0x700680 0x50>;
spi-flash@0 {
#address-cells = <0x1>;
@@ -125,12 +152,12 @@
#size-cells = <1>;
partition@0 {
- label = "U-Boot";
+ label = "U-Boot-1";
reg = <0x0 0x200000>;
};
partition@400000 {
- label = "Filesystem";
+ label = "Filesystem-1";
reg = <0x200000 0xe00000>;
};
};
@@ -140,7 +167,7 @@
&cp1_syscon0 {
cp1_pinctrl: pinctrl {
- compatible = "marvell,armada-7k-pinctrl";
+ compatible = "marvell,cp115-standalone-pinctrl";
cp1_i2c0_pins: cp1-i2c-pins-0 {
marvell,pins = "mpp37", "mpp38";
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db-A.dts b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db-A.dts
deleted file mode 100644
index 724d7dc..0000000
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db-A.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * copyright (c) 2019 marvell international ltd.
- *
- * spdx-license-identifier: gpl-2.0
- * https://spdx.org/licenses
- */
-
-#include "cn9131-db-A.dts"
-#include "cn9132-db.dtsi"
-
-/ {
- model = "Model: Marvell CN9132 development board (CP NOR) setup(A)";
- compatible = "marvell,cn9132-db-A", "marvell,armada-ap807-quad",
- "marvell,armada-ap807";
-
- aliases {
- gpio5 = &cp2_gpio1;
- gpio6 = &cp2_gpio2;
- ethernet5 = &cp2_eth0;
- };
-};
-
-&cp2_ethernet {
- status = "okay";
-};
-
-/* SLM-1521-V2, CON9 */
-&cp2_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp2_comphy4 0>;
- managed = "in-band-status";
- sfp = <&cp2_sfp_eth0>;
-};
-
-/* SLM-1521-V2, CON6 */
-&cp2_pcie0 {
- status = "okay";
- num-lanes = <2>;
- num-viewport = <8>;
- /* Generic PHY, providing serdes lanes */
- phys = <&cp2_comphy0 0
- &cp2_comphy1 0>;
-};
-
-/* SLM-1521-V2, CON8 */
-&cp2_pcie2 {
- status = "okay";
- num-lanes = <1>;
- num-viewport = <8>;
- /* Generic PHY, providing serdes lanes */
- phys = <&cp2_comphy5 2>;
-};
-
-&cp2_sata0 {
- status = "okay";
-};
-
-/* CON 2 on SLM-1683 - microSD */
-&cp2_sdhci0 {
- status = "okay";
-};
-
-/* SLM-1521-V2, CON11 */
-&cp2_usb3_1 {
- status = "okay";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp2_comphy3 1>;
-};
diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db.dts
similarity index 54%
rename from Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db.dtsi
rename to Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db.dts
index 7dc6c6e..8cb08ca 100644
--- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db.dtsi
+++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db.dts
@@ -1,35 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * copyright (c) 2019 marvell international ltd.
+ * Copyright (C) 2019 Marvell International Ltd.
*
- * spdx-license-identifier: gpl-2.0
- * https://spdx.org/licenses
+ * Device tree for the CN9132-DB board.
*/
-#undef CP110_NUM
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
-#undef CP110_PCIEx_CPU_MEM_BASE
-#undef CP110_PCIEx_MEM_BASE
-
-/* CP110-1 Settings */
-#define CP110_NAME cp2
-#define CP110_NUM 2
-#define CP110_BASE f6000000
-#define CP110_PCIE0_BASE f6600000
-#define CP110_PCIE1_BASE f6620000
-#define CP110_PCIE2_BASE f6640000
-#define CP110_PCIEx_CPU_MEM_BASE(iface) (0xe5000000 + (iface) * 0x1000000)
-#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIEx_CPU_MEM_BASE(iface))
-
-#include "armada-cp110.dtsi"
+#include "cn9131-db.dts"
/ {
- model = "DB-CN-9132";
- compatible = "marvell,cn9132", "marvell,armada-ap807-quad",
- "marvell,armada-ap807";
+ model = "Marvell Armada CN9132-DB";
+ compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ aliases {
+ gpio5 = &cp2_gpio1;
+ gpio6 = &cp2_gpio2;
+ ethernet5 = &cp2_eth0;
+ };
cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
compatible = "regulator-fixed";
@@ -71,18 +58,59 @@
cp2_sfp_eth0: sfp-eth0 {
compatible = "sff,sfp";
i2c-bus = <&cp2_sfpp0_i2c>;
- los-gpio = <&cp2_moudle_expander1 11 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp2_moudle_expander1 10 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp2_moudle_expander1 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp2_moudle_expander1 8 GPIO_ACTIVE_HIGH>;
+ los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+ /*
+ * SFP cages are unconnected on early PCBs because of an the I2C
+ * lanes not being connected. Prevent the port for being
+ * unusable by disabling the SFP node.
+ */
status = "disabled";
};
};
+/*
+ * Instantiate the second slave CP115
+ */
+
+#define CP11X_NAME cp2
+#define CP11X_BASE f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f6600000
+#define CP11X_PCIE1_BASE f6620000
+#define CP11X_PCIE2_BASE f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
&cp2_crypto {
+ status = "disabled";
+};
+
+&cp2_ethernet {
status = "okay";
};
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+ status = "disabled";
+ phy-mode = "10gbase-kr";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp2_comphy4 0>;
+ managed = "in-band-status";
+ sfp = <&cp2_sfp_eth0>;
+};
+
&cp2_gpio1 {
status = "okay";
};
@@ -111,7 +139,7 @@
#size-cells = <0>;
reg = <1>;
/* U12 */
- cp2_moudle_expander1: pca9555@21 {
+ cp2_module_expander1: pca9555@21 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
@@ -122,7 +150,38 @@
};
};
+/* SLM-1521-V2, CON6 */
+&cp2_pcie0 {
+ status = "okay";
+ num-lanes = <2>;
+ num-viewport = <8>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp2_comphy0 0
+ &cp2_comphy1 0>;
+};
+
+/* SLM-1521-V2, CON8 */
+&cp2_pcie2 {
+ status = "okay";
+ num-lanes = <1>;
+ num-viewport = <8>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp2_comphy5 2>;
+};
+
+&cp2_sata0 {
+ status = "okay";
+
+ /* SLM-1521-V2, CON4 */
+ sata-port@0 {
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp2_comphy2 0>;
+ };
+};
+
+/* CON 2 on SLM-1683 - microSD */
&cp2_sdhci0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&cp2_sdhci_pins>;
bus-width = <4>;
@@ -132,7 +191,7 @@
&cp2_syscon0 {
cp2_pinctrl: pinctrl {
- compatible = "marvell,armada-7k-pinctrl";
+ compatible = "marvell,cp115-standalone-pinctrl";
cp2_i2c0_pins: cp2-i2c-pins-0 {
marvell,pins = "mpp37", "mpp38";
@@ -152,8 +211,11 @@
phy-names = "usb";
};
+/* SLM-1521-V2, CON11 */
&cp2_usb3_1 {
status = "okay";
usb-phy = <&cp2_usb3_0_phy1>;
phy-names = "usb";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp2_comphy3 1>;
};
--
2.29.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [edk2-devel] [edk2-non-osi/edk2-platforms PATCH 0/4] Marvell SoCs device tree update
2021-03-18 19:57 [edk2-non-osi/edk2-platforms PATCH 0/4] Marvell SoCs device tree update Marcin Wojtas
` (3 preceding siblings ...)
2021-03-18 19:57 ` [edk2-non-osi PATCH 4/4] Marvell/OcteonTx: " Marcin Wojtas
@ 2021-04-15 19:00 ` Ard Biesheuvel
2021-04-15 20:30 ` Marcin Wojtas
4 siblings, 1 reply; 7+ messages in thread
From: Ard Biesheuvel @ 2021-04-15 19:00 UTC (permalink / raw)
To: edk2-devel-groups-io, Marcin Wojtas
Cc: Leif Lindholm, Ard Biesheuvel, Grzegorz Jaszczyk,
Kostya Porotchkin, upstream, Jon Nettleton
On Thu, 18 Mar 2021 at 20:58, Marcin Wojtas <mw@semihalf.com> wrote:
>
> Hi,
>
> This patchset updates the device tree sources for Marvell Armada 7k8k
> and Octeon TX2 SoC families. The hardware description files
> are based on Linux v5.11 with the necessary EDK2 adjustments,
> i.e.
> * disabled SPI flash devices
> * fixed-clock tree
> * disabled RTC nodes
> * generic ECAM PCIE description for MacchiatoBin platform
>
> Armada 7k8k files are moved to edk2-non-osi. Moreover the diff
> for Octeon Tx2 is much more significant, as the original version
> was a custom tree (at the time of merge the mainline Linux reference
> version was non-existent).
>
> First patch should be merged to edk2-platforms and the remaining
> ones to the edk2-non-osi. The changes had to be sent together
> due to their strict dependency.
>
> The patches are also available in public branches:
> https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/dt-upstream-r20210318
> https://github.com/semihalf-wojtas-marcin/edk2-non-osi/commits/dt-upstream-r20210318
>
> Any comments would be welcome.
>
> Best regards,
> Marcin
>
> Marcin Wojtas (4):
> [edk2-platforms]
> Marvell/Armada7k8k: Remove device tree sources from edk2-platforms
> [edk2-non-osi]
> Marvell/Armada7k8k: Move device tree sources from edk2-platforms
> Marvell/Armada7k8k: Update device trees
> Marvell/OcteonTx: Update device trees
>
For the series,
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Pushed as
04744d2432ba..fdd2ef2b3edb
efdc159ef7c9..4b53da6b12a8
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [edk2-devel] [edk2-non-osi/edk2-platforms PATCH 0/4] Marvell SoCs device tree update
2021-04-15 19:00 ` [edk2-devel] [edk2-non-osi/edk2-platforms PATCH 0/4] Marvell SoCs device tree update Ard Biesheuvel
@ 2021-04-15 20:30 ` Marcin Wojtas
0 siblings, 0 replies; 7+ messages in thread
From: Marcin Wojtas @ 2021-04-15 20:30 UTC (permalink / raw)
To: Ard Biesheuvel
Cc: edk2-devel-groups-io, Leif Lindholm, Ard Biesheuvel,
Grzegorz Jaszczyk, Kostya Porotchkin, upstream, Jon Nettleton
czw., 15 kwi 2021 o 21:00 Ard Biesheuvel <ardb@kernel.org> napisał(a):
>
> On Thu, 18 Mar 2021 at 20:58, Marcin Wojtas <mw@semihalf.com> wrote:
> >
> > Hi,
> >
> > This patchset updates the device tree sources for Marvell Armada 7k8k
> > and Octeon TX2 SoC families. The hardware description files
> > are based on Linux v5.11 with the necessary EDK2 adjustments,
> > i.e.
> > * disabled SPI flash devices
> > * fixed-clock tree
> > * disabled RTC nodes
> > * generic ECAM PCIE description for MacchiatoBin platform
> >
> > Armada 7k8k files are moved to edk2-non-osi. Moreover the diff
> > for Octeon Tx2 is much more significant, as the original version
> > was a custom tree (at the time of merge the mainline Linux reference
> > version was non-existent).
> >
> > First patch should be merged to edk2-platforms and the remaining
> > ones to the edk2-non-osi. The changes had to be sent together
> > due to their strict dependency.
> >
> > The patches are also available in public branches:
> > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/dt-upstream-r20210318
> > https://github.com/semihalf-wojtas-marcin/edk2-non-osi/commits/dt-upstream-r20210318
> >
> > Any comments would be welcome.
> >
> > Best regards,
> > Marcin
> >
> > Marcin Wojtas (4):
> > [edk2-platforms]
> > Marvell/Armada7k8k: Remove device tree sources from edk2-platforms
> > [edk2-non-osi]
> > Marvell/Armada7k8k: Move device tree sources from edk2-platforms
> > Marvell/Armada7k8k: Update device trees
> > Marvell/OcteonTx: Update device trees
> >
>
> For the series,
>
> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
>
> Pushed as
>
> 04744d2432ba..fdd2ef2b3edb
> efdc159ef7c9..4b53da6b12a8
Thanks!
Marcin
^ permalink raw reply [flat|nested] 7+ messages in thread