From: "Sunny Wang" <Sunny.Wang@arm.com>
To: devel@edk2.groups.io
Cc: Sunny Wang <Sunny.Wang@arm.com>,
Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com>,
Sami Mujawar <sami.mujawar@arm.com>,
Jeremy Linton <jeremy.linton@arm.com>, Pete Batard <pete@akeo.ie>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Sunny Wang <sunny.wang@arm.com>
Subject: [PATCH v2 1/2] Platform/RaspberryPi: Dynamically build UARTs info in ACPI
Date: Wed, 24 Mar 2021 17:45:23 +0800 [thread overview]
Message-ID: <20210324094524.184-1-Sunny.Wang@arm.com> (raw)
Changes:
1. Add code to ConfigDxe driver and AcpiTables module to dynamically
build either Mini UART or PL011 UART info in ACPI. This fixes the
issue discussed in https://github.com/pftf/RPi4/issues/118.
2. Cleanup by moving duplicate Debug Port 2 table related defines and
structures to a newly created header file (RpiDebugPort2Table.h).
Testing Done:
- Booted to UEFI shell and use acpiview command to check the result of
the different UART settings in config.txt (enabling either Mini UART
or PL011) and SPCR, DBG2 tables and device BTH0 are dynamically
changed as expected.
Cc: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Pete Batard <pete@akeo.ie>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Sunny Wang <sunny.wang@arm.com>
---
.../RaspberryPi/AcpiTables/AcpiTables.inf | 9 +-
.../RaspberryPi/AcpiTables/Dbg2MiniUart.aslc | 82 ++++++++
.../AcpiTables/{Dbg2.aslc => Dbg2Pl011.aslc} | 187 ++++++++---------
.../RaspberryPi/AcpiTables/SpcrMiniUart.aslc | 92 +++++++++
.../AcpiTables/{Spcr.aslc => SpcrPl011.aslc} | 188 +++++++++---------
Platform/RaspberryPi/AcpiTables/Uart.asl | 10 +-
.../RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 107 +++++++++-
.../IndustryStandard/RpiDebugPort2Table.h | 34 ++++
8 files changed, 497 insertions(+), 212 deletions(-)
create mode 100644 Platform/RaspberryPi/AcpiTables/Dbg2MiniUart.aslc
rename Platform/RaspberryPi/AcpiTables/{Dbg2.aslc => Dbg2Pl011.aslc} (72%)
create mode 100644 Platform/RaspberryPi/AcpiTables/SpcrMiniUart.aslc
rename Platform/RaspberryPi/AcpiTables/{Spcr.aslc => SpcrPl011.aslc} (87%)
create mode 100644 Platform/RaspberryPi/Include/IndustryStandard/RpiDebugPort2Table.h
diff --git a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
index d3363a76a1..fc8e927138 100644
--- a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
+++ b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
@@ -2,7 +2,7 @@
#
# ACPI table data and ASL sources required to boot the platform.
#
-# Copyright (c) 2019, ARM Limited. All rights reserved.
+# Copyright (c) 2019-2021, ARM Limited. All rights reserved.
# Copyright (c) 2017, Andrey Warkentin <andrey.warkentin@gmail.com>
# Copyright (c) Microsoft Corporation. All rights reserved.
#
@@ -28,12 +28,14 @@
Emmc.asl
Madt.aslc
Fadt.aslc
- Dbg2.aslc
+ Dbg2MiniUart.aslc
+ Dbg2Pl011.aslc
Gtdt.aslc
Iort.aslc
Dsdt.asl
Csrt.aslc
- Spcr.aslc
+ SpcrMiniUart.aslc
+ SpcrPl011.aslc
Pptt.aslc
SsdtThermal.asl
@@ -71,3 +73,4 @@
[BuildOptions]
GCC:*_*_*_ASL_FLAGS = -vw3133 -vw3150
+
diff --git a/Platform/RaspberryPi/AcpiTables/Dbg2MiniUart.aslc b/Platform/RaspberryPi/AcpiTables/Dbg2MiniUart.aslc
new file mode 100644
index 0000000000..c83b978731
--- /dev/null
+++ b/Platform/RaspberryPi/AcpiTables/Dbg2MiniUart.aslc
@@ -0,0 +1,82 @@
+/** @file
+ *
+ * Debug Port Table (DBG2)
+ *
+ * Copyright (c) 2019, Pete Batard <pete@akeo.ie>
+ * Copyright (c) 2012-2021, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-2-Clause-Patent
+ *
+ **/
+
+#include <IndustryStandard/Acpi.h>
+#include <IndustryStandard/Bcm2836.h>
+#include <IndustryStandard/RpiDebugPort2Table.h>
+#include <Library/AcpiLib.h>
+#include <Library/PcdLib.h>
+
+#include "AcpiTables.h"
+
+#pragma pack(1)
+
+#define RPI_UART_INTERFACE_TYPE EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART
+#define RPI_UART_BASE_ADDRESS BCM2836_MINI_UART_BASE_ADDRESS
+#define RPI_UART_LENGTH BCM2836_MINI_UART_LENGTH
+//
+// RPI_UART_STR should match the value used Uart.asl
+//
+#define RPI_UART_STR { '\\', '_', 'S', 'B', '.', 'G', 'D', 'V', '0', '.', 'U', 'R', 'T', 'M', 0x00 }
+
+#define DBG2_DEBUG_PORT_DDI(NumReg, SubType, UartBase, UartAddrLen, UartNameStr) { \
+ { \
+ EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION, /* UINT8 Revision */ \
+ sizeof (DBG2_DEBUG_DEVICE_INFORMATION), /* UINT16 Length */ \
+ NumReg, /* UINT8 NumberofGenericAddressRegisters */ \
+ RPI_DBG2_NAMESPACESTRING_FIELD_SIZE, /* UINT16 NameSpaceStringLength */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, NameSpaceString), /* UINT16 NameSpaceStringOffset */ \
+ 0, /* UINT16 OemDataLength */ \
+ 0, /* UINT16 OemDataOffset */ \
+ EFI_ACPI_DBG2_PORT_TYPE_SERIAL, /* UINT16 Port Type */ \
+ SubType, /* UINT16 Port Subtype */ \
+ {EFI_ACPI_RESERVED_BYTE, EFI_ACPI_RESERVED_BYTE}, /* UINT8 Reserved[2] */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, BaseAddressRegister), /* UINT16 BaseAddressRegister Offset */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, AddressSize) /* UINT16 AddressSize Offset */ \
+ }, \
+ ARM_GAS32 (UartBase), /* EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister */ \
+ UartAddrLen, /* UINT32 AddressSize */ \
+ UartNameStr /* UINT8 NameSpaceString[MAX_DBG2_NAME_LEN] */ \
+ }
+
+
+STATIC DBG2_TABLE Dbg2 = {
+ {
+ ACPI_HEADER (
+ EFI_ACPI_6_3_DEBUG_PORT_2_TABLE_SIGNATURE,
+ DBG2_TABLE,
+ EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION
+ ),
+ OFFSET_OF (DBG2_TABLE, Dbg2DeviceInfo),
+ RPI_DBG2_NUM_DEBUG_PORTS /* UINT32 NumberDbgDeviceInfo */
+ },
+ {
+ /*
+ * Kernel Debug Port
+ */
+ DBG2_DEBUG_PORT_DDI (
+ RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS,
+ RPI_UART_INTERFACE_TYPE,
+ RPI_UART_BASE_ADDRESS,
+ RPI_UART_LENGTH,
+ RPI_UART_STR
+ ),
+ }
+};
+
+#pragma pack()
+
+//
+// Reference the table being generated to prevent the optimizer from removing
+// the data structure from the executable
+//
+VOID* CONST ReferenceAcpiTable = &Dbg2;
+
diff --git a/Platform/RaspberryPi/AcpiTables/Dbg2.aslc b/Platform/RaspberryPi/AcpiTables/Dbg2Pl011.aslc
similarity index 72%
rename from Platform/RaspberryPi/AcpiTables/Dbg2.aslc
rename to Platform/RaspberryPi/AcpiTables/Dbg2Pl011.aslc
index e3f2adae7e..dccfa24601 100644
--- a/Platform/RaspberryPi/AcpiTables/Dbg2.aslc
+++ b/Platform/RaspberryPi/AcpiTables/Dbg2Pl011.aslc
@@ -1,105 +1,82 @@
-/** @file
- *
- * Debug Port Table (DBG2)
- *
- * Copyright (c) 2019, Pete Batard <pete@akeo.ie>
- * Copyright (c) 2012-2020, ARM Limited. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-2-Clause-Patent
- *
- **/
-
-#include <IndustryStandard/Acpi.h>
-#include <IndustryStandard/Bcm2836.h>
-#include <IndustryStandard/DebugPort2Table.h>
-#include <Library/AcpiLib.h>
-#include <Library/PcdLib.h>
-
-#include "AcpiTables.h"
-
-#pragma pack(1)
-
-#define RPI_DBG2_NUM_DEBUG_PORTS 1
-#define RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS 1
-#define RPI_DBG2_NAMESPACESTRING_FIELD_SIZE 15
-
-#if (RPI_MODEL == 4)
-#define RPI_UART_INTERFACE_TYPE EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_PL011_UART
-#define RPI_UART_BASE_ADDRESS BCM2836_PL011_UART_BASE_ADDRESS
-#define RPI_UART_LENGTH BCM2836_PL011_UART_LENGTH
-#define RPI_UART_STR { '\\', '_', 'S', 'B', '.', 'G', 'D', 'V', '0', '.', 'U', 'R', 'T', '0', 0x00 }
-#else
-#define RPI_UART_INTERFACE_TYPE EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART
-#define RPI_UART_BASE_ADDRESS BCM2836_MINI_UART_BASE_ADDRESS
-#define RPI_UART_LENGTH BCM2836_MINI_UART_LENGTH
-//
-// RPI_UART_STR should match the value used Uart.asl
-//
-#define RPI_UART_STR { '\\', '_', 'S', 'B', '.', 'G', 'D', 'V', '0', '.', 'U', 'R', 'T', 'M', 0x00 }
-#endif
-
-typedef struct {
- EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT Dbg2Device;
- EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister;
- UINT32 AddressSize;
- UINT8 NameSpaceString[RPI_DBG2_NAMESPACESTRING_FIELD_SIZE];
-} DBG2_DEBUG_DEVICE_INFORMATION;
-
-typedef struct {
- EFI_ACPI_DEBUG_PORT_2_DESCRIPTION_TABLE Description;
- DBG2_DEBUG_DEVICE_INFORMATION Dbg2DeviceInfo[RPI_DBG2_NUM_DEBUG_PORTS];
-} DBG2_TABLE;
-
-
-#define DBG2_DEBUG_PORT_DDI(NumReg, SubType, UartBase, UartAddrLen, UartNameStr) { \
- { \
- EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION, /* UINT8 Revision */ \
- sizeof (DBG2_DEBUG_DEVICE_INFORMATION), /* UINT16 Length */ \
- NumReg, /* UINT8 NumberofGenericAddressRegisters */ \
- RPI_DBG2_NAMESPACESTRING_FIELD_SIZE, /* UINT16 NameSpaceStringLength */ \
- OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, NameSpaceString), /* UINT16 NameSpaceStringOffset */ \
- 0, /* UINT16 OemDataLength */ \
- 0, /* UINT16 OemDataOffset */ \
- EFI_ACPI_DBG2_PORT_TYPE_SERIAL, /* UINT16 Port Type */ \
- SubType, /* UINT16 Port Subtype */ \
- {EFI_ACPI_RESERVED_BYTE, EFI_ACPI_RESERVED_BYTE}, /* UINT8 Reserved[2] */ \
- OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, BaseAddressRegister), /* UINT16 BaseAddressRegister Offset */ \
- OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, AddressSize) /* UINT16 AddressSize Offset */ \
- }, \
- ARM_GAS32 (UartBase), /* EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister */ \
- UartAddrLen, /* UINT32 AddressSize */ \
- UartNameStr /* UINT8 NameSpaceString[MAX_DBG2_NAME_LEN] */ \
- }
-
-
-STATIC DBG2_TABLE Dbg2 = {
- {
- ACPI_HEADER (
- EFI_ACPI_6_3_DEBUG_PORT_2_TABLE_SIGNATURE,
- DBG2_TABLE,
- EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION
- ),
- OFFSET_OF (DBG2_TABLE, Dbg2DeviceInfo),
- RPI_DBG2_NUM_DEBUG_PORTS /* UINT32 NumberDbgDeviceInfo */
- },
- {
- /*
- * Kernel Debug Port
- */
- DBG2_DEBUG_PORT_DDI (
- RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS,
- RPI_UART_INTERFACE_TYPE,
- RPI_UART_BASE_ADDRESS,
- RPI_UART_LENGTH,
- RPI_UART_STR
- ),
- }
-};
-
-#pragma pack()
-
-//
-// Reference the table being generated to prevent the optimizer from removing
-// the data structure from the executable
-//
-VOID* CONST ReferenceAcpiTable = &Dbg2;
+/** @file
+ *
+ * Debug Port Table (DBG2)
+ *
+ * Copyright (c) 2019, Pete Batard <pete@akeo.ie>
+ * Copyright (c) 2012-2021, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-2-Clause-Patent
+ *
+ **/
+
+#include <IndustryStandard/Acpi.h>
+#include <IndustryStandard/Bcm2836.h>
+#include <IndustryStandard/RpiDebugPort2Table.h>
+#include <Library/AcpiLib.h>
+#include <Library/PcdLib.h>
+
+#include "AcpiTables.h"
+
+#pragma pack(1)
+
+#define RPI_UART_INTERFACE_TYPE EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_PL011_UART
+#define RPI_UART_BASE_ADDRESS BCM2836_PL011_UART_BASE_ADDRESS
+#define RPI_UART_LENGTH BCM2836_PL011_UART_LENGTH
+//
+// RPI_UART_STR should match the value used Uart.asl
+//
+#define RPI_UART_STR { '\\', '_', 'S', 'B', '.', 'G', 'D', 'V', '0', '.', 'U', 'R', 'T', '0', 0x00 }
+
+#define DBG2_DEBUG_PORT_DDI(NumReg, SubType, UartBase, UartAddrLen, UartNameStr) { \
+ { \
+ EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION, /* UINT8 Revision */ \
+ sizeof (DBG2_DEBUG_DEVICE_INFORMATION), /* UINT16 Length */ \
+ NumReg, /* UINT8 NumberofGenericAddressRegisters */ \
+ RPI_DBG2_NAMESPACESTRING_FIELD_SIZE, /* UINT16 NameSpaceStringLength */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, NameSpaceString), /* UINT16 NameSpaceStringOffset */ \
+ 0, /* UINT16 OemDataLength */ \
+ 0, /* UINT16 OemDataOffset */ \
+ EFI_ACPI_DBG2_PORT_TYPE_SERIAL, /* UINT16 Port Type */ \
+ SubType, /* UINT16 Port Subtype */ \
+ {EFI_ACPI_RESERVED_BYTE, EFI_ACPI_RESERVED_BYTE}, /* UINT8 Reserved[2] */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, BaseAddressRegister), /* UINT16 BaseAddressRegister Offset */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, AddressSize) /* UINT16 AddressSize Offset */ \
+ }, \
+ ARM_GAS32 (UartBase), /* EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister */ \
+ UartAddrLen, /* UINT32 AddressSize */ \
+ UartNameStr /* UINT8 NameSpaceString[MAX_DBG2_NAME_LEN] */ \
+ }
+
+
+STATIC DBG2_TABLE Dbg2 = {
+ {
+ ACPI_HEADER (
+ EFI_ACPI_6_3_DEBUG_PORT_2_TABLE_SIGNATURE,
+ DBG2_TABLE,
+ EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION
+ ),
+ OFFSET_OF (DBG2_TABLE, Dbg2DeviceInfo),
+ RPI_DBG2_NUM_DEBUG_PORTS /* UINT32 NumberDbgDeviceInfo */
+ },
+ {
+ /*
+ * Kernel Debug Port
+ */
+ DBG2_DEBUG_PORT_DDI (
+ RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS,
+ RPI_UART_INTERFACE_TYPE,
+ RPI_UART_BASE_ADDRESS,
+ RPI_UART_LENGTH,
+ RPI_UART_STR
+ ),
+ }
+};
+
+#pragma pack()
+
+//
+// Reference the table being generated to prevent the optimizer from removing
+// the data structure from the executable
+//
+VOID* CONST ReferenceAcpiTable = &Dbg2;
+
diff --git a/Platform/RaspberryPi/AcpiTables/SpcrMiniUart.aslc b/Platform/RaspberryPi/AcpiTables/SpcrMiniUart.aslc
new file mode 100644
index 0000000000..aaf5c5317e
--- /dev/null
+++ b/Platform/RaspberryPi/AcpiTables/SpcrMiniUart.aslc
@@ -0,0 +1,92 @@
+/** @file
+* SPCR Table
+*
+* Copyright (c) 2019 Pete Batard <pete@akeo.ie>
+* Copyright (c) 2014-2021, ARM Limited. All rights reserved.
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+*
+**/
+
+#include <IndustryStandard/Acpi.h>
+#include <IndustryStandard/Bcm2836.h>
+#include <IndustryStandard/SerialPortConsoleRedirectionTable.h>
+#include <Library/AcpiLib.h>
+#include <Library/PcdLib.h>
+
+#include "AcpiTables.h"
+
+#define RPI_UART_FLOW_CONTROL_NONE 0
+
+#define RPI_UART_INTERFACE_TYPE EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_BCM2835_UART
+#define RPI_UART_BASE_ADDRESS BCM2836_MINI_UART_BASE_ADDRESS
+#define RPI_UART_INTERRUPT BCM2836_MINI_UART_INTERRUPT
+
+STATIC EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE Spcr = {
+ ACPI_HEADER (
+ EFI_ACPI_6_3_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE,
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE,
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_REVISION
+ ),
+ // UINT8 InterfaceType;
+ RPI_UART_INTERFACE_TYPE,
+ // UINT8 Reserved1[3];
+ {
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE
+ },
+ // EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddress;
+ ARM_GAS32 (RPI_UART_BASE_ADDRESS),
+ // UINT8 InterruptType;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERRUPT_TYPE_GIC,
+ // UINT8 Irq;
+ 0, // Not used on ARM
+ // UINT32 GlobalSystemInterrupt;
+ RPI_UART_INTERRUPT,
+ // UINT8 BaudRate;
+#if (FixedPcdGet64 (PcdUartDefaultBaudRate) == 9600)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_9600,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 19200)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_19200,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 57600)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_57600,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 115200)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_115200,
+#else
+#error Unsupported SPCR Baud Rate
+#endif
+ // UINT8 Parity;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_PARITY_NO_PARITY,
+ // UINT8 StopBits;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_STOP_BITS_1,
+ // UINT8 FlowControl;
+ RPI_UART_FLOW_CONTROL_NONE,
+ // UINT8 TerminalType;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_TERMINAL_TYPE_VT_UTF8,
+ // UINT8 Reserved2;
+ EFI_ACPI_RESERVED_BYTE,
+ // UINT16 PciDeviceId;
+ 0xFFFF,
+ // UINT16 PciVendorId;
+ 0xFFFF,
+ // UINT8 PciBusNumber;
+ 0x00,
+ // UINT8 PciDeviceNumber;
+ 0x00,
+ // UINT8 PciFunctionNumber;
+ 0x00,
+ // UINT32 PciFlags;
+ 0x00000000,
+ // UINT8 PciSegment;
+ 0x00,
+ // UINT32 Reserved3;
+ EFI_ACPI_RESERVED_DWORD
+};
+
+//
+// Reference the table being generated to prevent the optimizer from removing the
+// data structure from the executable
+//
+VOID* CONST ReferenceAcpiTable = &Spcr;
+
diff --git a/Platform/RaspberryPi/AcpiTables/Spcr.aslc b/Platform/RaspberryPi/AcpiTables/SpcrPl011.aslc
similarity index 87%
rename from Platform/RaspberryPi/AcpiTables/Spcr.aslc
rename to Platform/RaspberryPi/AcpiTables/SpcrPl011.aslc
index 07df3a718d..5a540adf08 100644
--- a/Platform/RaspberryPi/AcpiTables/Spcr.aslc
+++ b/Platform/RaspberryPi/AcpiTables/SpcrPl011.aslc
@@ -1,97 +1,91 @@
-/** @file
-* SPCR Table
-*
-* Copyright (c) 2019 Pete Batard <pete@akeo.ie>
-* Copyright (c) 2014-2016, ARM Limited. All rights reserved.
-*
-* SPDX-License-Identifier: BSD-2-Clause-Patent
-*
-**/
-
-#include <IndustryStandard/Acpi.h>
-#include <IndustryStandard/Bcm2836.h>
-#include <IndustryStandard/SerialPortConsoleRedirectionTable.h>
-#include <Library/AcpiLib.h>
-#include <Library/PcdLib.h>
-
-#include "AcpiTables.h"
-
-#define RPI_UART_FLOW_CONTROL_NONE 0
-
-// Prefer PL011 serial output on the Raspberry Pi 4
-#if (RPI_MODEL == 4)
-#define RPI_UART_INTERFACE_TYPE EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_ARM_PL011_UART
-#define RPI_UART_BASE_ADDRESS BCM2836_PL011_UART_BASE_ADDRESS
-#define RPI_UART_INTERRUPT BCM2836_PL011_UART_INTERRUPT
-#else
-#define RPI_UART_INTERFACE_TYPE EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_BCM2835_UART
-#define RPI_UART_BASE_ADDRESS BCM2836_MINI_UART_BASE_ADDRESS
-#define RPI_UART_INTERRUPT BCM2836_MINI_UART_INTERRUPT
-#endif
-STATIC EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE Spcr = {
- ACPI_HEADER (
- EFI_ACPI_6_3_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE,
- EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE,
- EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_REVISION
- ),
- // UINT8 InterfaceType;
- RPI_UART_INTERFACE_TYPE,
- // UINT8 Reserved1[3];
- {
- EFI_ACPI_RESERVED_BYTE,
- EFI_ACPI_RESERVED_BYTE,
- EFI_ACPI_RESERVED_BYTE
- },
- // EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddress;
- ARM_GAS32 (RPI_UART_BASE_ADDRESS),
- // UINT8 InterruptType;
- EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERRUPT_TYPE_GIC,
- // UINT8 Irq;
- 0, // Not used on ARM
- // UINT32 GlobalSystemInterrupt;
- RPI_UART_INTERRUPT,
- // UINT8 BaudRate;
-#if (FixedPcdGet64 (PcdUartDefaultBaudRate) == 9600)
- EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_9600,
-#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 19200)
- EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_19200,
-#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 57600)
- EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_57600,
-#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 115200)
- EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_115200,
-#else
-#error Unsupported SPCR Baud Rate
-#endif
- // UINT8 Parity;
- EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_PARITY_NO_PARITY,
- // UINT8 StopBits;
- EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_STOP_BITS_1,
- // UINT8 FlowControl;
- RPI_UART_FLOW_CONTROL_NONE,
- // UINT8 TerminalType;
- EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_TERMINAL_TYPE_VT_UTF8,
- // UINT8 Reserved2;
- EFI_ACPI_RESERVED_BYTE,
- // UINT16 PciDeviceId;
- 0xFFFF,
- // UINT16 PciVendorId;
- 0xFFFF,
- // UINT8 PciBusNumber;
- 0x00,
- // UINT8 PciDeviceNumber;
- 0x00,
- // UINT8 PciFunctionNumber;
- 0x00,
- // UINT32 PciFlags;
- 0x00000000,
- // UINT8 PciSegment;
- 0x00,
- // UINT32 Reserved3;
- EFI_ACPI_RESERVED_DWORD
-};
-
-//
-// Reference the table being generated to prevent the optimizer from removing the
-// data structure from the executable
-//
-VOID* CONST ReferenceAcpiTable = &Spcr;
+/** @file
+* SPCR Table
+*
+* Copyright (c) 2019 Pete Batard <pete@akeo.ie>
+* Copyright (c) 2014-2021, ARM Limited. All rights reserved.
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+*
+**/
+
+#include <IndustryStandard/Acpi.h>
+#include <IndustryStandard/Bcm2836.h>
+#include <IndustryStandard/SerialPortConsoleRedirectionTable.h>
+#include <Library/AcpiLib.h>
+#include <Library/PcdLib.h>
+
+#include "AcpiTables.h"
+
+#define RPI_UART_FLOW_CONTROL_NONE 0
+
+#define RPI_UART_INTERFACE_TYPE EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_ARM_PL011_UART
+#define RPI_UART_BASE_ADDRESS BCM2836_PL011_UART_BASE_ADDRESS
+#define RPI_UART_INTERRUPT BCM2836_PL011_UART_INTERRUPT
+
+STATIC EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE Spcr = {
+ ACPI_HEADER (
+ EFI_ACPI_6_3_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE,
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE,
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_REVISION
+ ),
+ // UINT8 InterfaceType;
+ RPI_UART_INTERFACE_TYPE,
+ // UINT8 Reserved1[3];
+ {
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE
+ },
+ // EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddress;
+ ARM_GAS32 (RPI_UART_BASE_ADDRESS),
+ // UINT8 InterruptType;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERRUPT_TYPE_GIC,
+ // UINT8 Irq;
+ 0, // Not used on ARM
+ // UINT32 GlobalSystemInterrupt;
+ RPI_UART_INTERRUPT,
+ // UINT8 BaudRate;
+#if (FixedPcdGet64 (PcdUartDefaultBaudRate) == 9600)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_9600,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 19200)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_19200,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 57600)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_57600,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 115200)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_115200,
+#else
+#error Unsupported SPCR Baud Rate
+#endif
+ // UINT8 Parity;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_PARITY_NO_PARITY,
+ // UINT8 StopBits;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_STOP_BITS_1,
+ // UINT8 FlowControl;
+ RPI_UART_FLOW_CONTROL_NONE,
+ // UINT8 TerminalType;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_TERMINAL_TYPE_VT_UTF8,
+ // UINT8 Reserved2;
+ EFI_ACPI_RESERVED_BYTE,
+ // UINT16 PciDeviceId;
+ 0xFFFF,
+ // UINT16 PciVendorId;
+ 0xFFFF,
+ // UINT8 PciBusNumber;
+ 0x00,
+ // UINT8 PciDeviceNumber;
+ 0x00,
+ // UINT8 PciFunctionNumber;
+ 0x00,
+ // UINT32 PciFlags;
+ 0x00000000,
+ // UINT8 PciSegment;
+ 0x00,
+ // UINT32 Reserved3;
+ EFI_ACPI_RESERVED_DWORD
+};
+
+//
+// Reference the table being generated to prevent the optimizer from removing the
+// data structure from the executable
+//
+VOID* CONST ReferenceAcpiTable = &Spcr;
diff --git a/Platform/RaspberryPi/AcpiTables/Uart.asl b/Platform/RaspberryPi/AcpiTables/Uart.asl
index 81ae6711af..8ce297078d 100644
--- a/Platform/RaspberryPi/AcpiTables/Uart.asl
+++ b/Platform/RaspberryPi/AcpiTables/Uart.asl
@@ -2,6 +2,7 @@
*
* [DSDT] Serial devices (UART).
*
+ * Copyright (c) 2021, ARM Limited. All rights reserved.
* Copyright (c) 2020, Pete Batard <pete@akeo.ie>
* Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
* Copyright (c) Microsoft Corporation. All rights reserved.
@@ -101,7 +102,10 @@ Device(BTH0)
{
Name (RBUF, ResourceTemplate ()
{
- // BT UART: URT0 (PL011) or URTM (miniUART)
+ //
+ // BT UART: ResourceSource will be dynamically updated to
+ // either URT0 (PL011) or URTM (miniUART) during boot
+ //
UARTSerialBus(
115200, // InitialBaudRate: in BPS
, // BitsPerByte: default to 8 bits
@@ -126,11 +130,7 @@ Device(BTH0)
// no flow control.
16, // ReceiveBufferSize
16, // TransmitBufferSize
-#if (RPI_MODEL == 4)
- "\\_SB.GDV0.URTM", // ResourceSource:
-#else
"\\_SB.GDV0.URT0", // ResourceSource:
-#endif
// UART bus controller name
, // ResourceSourceIndex: assumed to be 0
, // ResourceUsage: assumed to be
diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
index 22f86d4d44..68ba14c846 100644
--- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
+++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
@@ -1,6 +1,6 @@
/** @file
*
- * Copyright (c) 2019 - 2020, ARM Limited. All rights reserved.
+ * Copyright (c) 2019 - 2021, ARM Limited. All rights reserved.
* Copyright (c) 2018 - 2020, Andrei Warkentin <andrey.warkentin@gmail.com>
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -12,6 +12,9 @@
#include <IndustryStandard/Bcm2836.h>
#include <IndustryStandard/Bcm2836Gpio.h>
#include <IndustryStandard/RpiMbox.h>
+#include <IndustryStandard/SerialPortConsoleRedirectionTable.h>
+#include <IndustryStandard/RpiDebugPort2Table.h>
+
#include <Library/AcpiLib.h>
#include <Library/DebugLib.h>
#include <Library/DevicePathLib.h>
@@ -40,6 +43,8 @@ STATIC UINT32 mModelFamily = 0;
STATIC UINT32 mModelInstalledMB = 0;
STATIC EFI_MAC_ADDRESS mMacAddress;
+BOOLEAN mUsePl011Uart;
+BOOLEAN mUseMiniUart;
/*
* The GUID inside Platform/RaspberryPi/RPi3/AcpiTables/AcpiTables.inf and
@@ -699,6 +704,71 @@ UpdateSdtNameOps (
}
}
+//
+// BTH0._HID.BCM2EA6
+//
+#define BTH0_HID_PATTERN_LEN 17
+
+//
+// \_SB.GDV0.URT
+//
+#define RESOURCE_SOURCE_PATTERN_LEN 13
+
+//
+// Scan the given namespace table (DSDT/SSDT) for AML NameOps
+// listed in the NameOpReplace structure. If one is found then
+// update the value in the table from the specified Pcd
+//
+// This allows us to have conditionals in AML controlled
+// by options in the BDS or detected during firmware bootstrap.
+// We could extend this concept for strings/etc but due to len
+// variations its probably easier to encode the strings
+// in the ASL and pick the correct one based off a variable.
+//
+STATIC
+VOID
+UpdateDevBth0 (
+ EFI_ACPI_DESCRIPTION_HEADER *AcpiTable
+ )
+{
+ UINTN Index;
+ CHAR8 Bth0HidPattern[BTH0_HID_PATTERN_LEN] = {0x42, 0x54, 0x48, 0x30, 0x08, 0x5F, 0X48, 0x49, 0x44, 0x0D, 0x42, 0x43, 0x4D, 0x32, 0x45, 0x41, 0x36};
+ CHAR8 ResourceSourcePattern[BTH0_HID_PATTERN_LEN] = {0x5C, 0x5F, 0x53, 0x42, 0x2E, 0x47, 0X44, 0x56, 0x30, 0x2E, 0x55, 0x52, 0x54};
+ BOOLEAN FoundBth0HidPattern;
+ UINT8 *SdtPtr;
+ UINT32 SdtSize;
+
+ FoundBth0HidPattern = FALSE;
+ SdtSize = AcpiTable->Length;
+
+ if (SdtSize > 0) {
+ SdtPtr = (UINT8 *)AcpiTable;
+ for (Index = 0; Index < (SdtSize - BTH0_HID_PATTERN_LEN); Index++) {
+ if (!FoundBth0HidPattern) {
+ if (CompareMem (SdtPtr + Index, Bth0HidPattern, BTH0_HID_PATTERN_LEN) == 0) {
+ FoundBth0HidPattern = TRUE;
+ }
+ } else {
+ if (CompareMem (SdtPtr + Index, ResourceSourcePattern, RESOURCE_SOURCE_PATTERN_LEN) == 0) {
+ if (mUsePl011Uart) {
+ //
+ // Since PL011 has been set as Primary UART, set the last char in
+ // ResourceSource string to 'M' (0x4D) so that Mini UART can be used as Secondary UART for BlueTooth.
+ //
+ SdtPtr[Index + RESOURCE_SOURCE_PATTERN_LEN] = 0x4D;
+ } else if (mUseMiniUart) {
+ //
+ // Since Mini UART has been set as Primary UART, set the last char in
+ // ResourceSource string to '0' (0x30) so that PL011 can be used as Secondary UART for BlueTooth.
+ //
+ SdtPtr[Index + RESOURCE_SOURCE_PATTERN_LEN] = 0x30;
+ }
+ break;
+ }
+ }
+ }
+ }
+}
STATIC
BOOLEAN
@@ -770,8 +840,14 @@ HandleDynamicNamespace (
{
UINTN Tables;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE *SpcrTable;
+ DBG2_TABLE *Dbg2Table;
+
switch (AcpiHeader->Signature) {
case SIGNATURE_32 ('D', 'S', 'D', 'T'):
+ UpdateDevBth0 (AcpiHeader);
+ return TRUE;
+
case SIGNATURE_32 ('S', 'S', 'D', 'T'):
for (Tables = 0; SdtTables[Tables].OemTableId; Tables++) {
if (AcpiHeader->OemTableId == SdtTables[Tables].OemTableId) {
@@ -779,14 +855,37 @@ HandleDynamicNamespace (
}
}
DEBUG ((DEBUG_ERROR, "Found namespace table not in table list.\n"));
-
return FALSE;
+
case SIGNATURE_32 ('I', 'O', 'R', 'T'):
// only enable the IORT on machines with >3G and no limit
// to avoid problems with rhel/centos and other older OSs
if (PcdGet32 (PcdRamLimitTo3GB) || !PcdGet32 (PcdRamMoreThan3GB)) {
return FALSE;
}
+ return TRUE;
+
+ case SIGNATURE_32 ('S', 'P', 'C', 'R'):
+ SpcrTable = (EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE *)AcpiHeader;
+ if (mUsePl011Uart && (SpcrTable->InterfaceType == EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_ARM_PL011_UART)) {
+ return TRUE;
+ } else if (mUseMiniUart && (SpcrTable->InterfaceType == EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_BCM2835_UART)) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+ return TRUE;
+
+ case SIGNATURE_32 ('D', 'B', 'G', '2'):
+ Dbg2Table = (DBG2_TABLE *)AcpiHeader;
+ if (mUsePl011Uart && (Dbg2Table->Dbg2DeviceInfo[0].Dbg2Device.PortSubtype == EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_PL011_UART)) {
+ return TRUE;
+ } else if (mUseMiniUart && (Dbg2Table->Dbg2DeviceInfo[0].Dbg2Device.PortSubtype == EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART)) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+ return TRUE;
}
return TRUE;
@@ -803,6 +902,9 @@ ConfigInitialize (
EFI_STATUS Status;
EFI_EVENT EndOfDxeEvent;
+ mUsePl011Uart = ((MmioRead32(GPIO_BASE_ADDRESS + 4) & 0x0003F000) == 0x00024000);
+ mUseMiniUart = ((MmioRead32(GPIO_BASE_ADDRESS + 4) & 0x0003F000) == 0x00012000);
+
Status = gBS->LocateProtocol (&gRaspberryPiFirmwareProtocolGuid,
NULL, (VOID**)&mFwProtocol);
ASSERT_EFI_ERROR (Status);
@@ -859,3 +961,4 @@ ConfigInitialize (
return EFI_SUCCESS;
}
+
diff --git a/Platform/RaspberryPi/Include/IndustryStandard/RpiDebugPort2Table.h b/Platform/RaspberryPi/Include/IndustryStandard/RpiDebugPort2Table.h
new file mode 100644
index 0000000000..8f7452f97a
--- /dev/null
+++ b/Platform/RaspberryPi/Include/IndustryStandard/RpiDebugPort2Table.h
@@ -0,0 +1,34 @@
+/** @file
+
+ Copyright (c) 2021, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ **/
+#ifndef __RPI_DEBUG_PORT_2_H__
+#define __RPI_DEBUG_PORT_2_H__
+
+#include <IndustryStandard/DebugPort2Table.h>
+
+#define RPI_DBG2_NUM_DEBUG_PORTS 1
+#define RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS 1
+#define RPI_DBG2_NAMESPACESTRING_FIELD_SIZE 15
+
+#pragma pack(1)
+
+
+typedef struct {
+ EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT Dbg2Device;
+ EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister;
+ UINT32 AddressSize;
+ UINT8 NameSpaceString[RPI_DBG2_NAMESPACESTRING_FIELD_SIZE];
+} DBG2_DEBUG_DEVICE_INFORMATION;
+
+typedef struct {
+ EFI_ACPI_DEBUG_PORT_2_DESCRIPTION_TABLE Description;
+ DBG2_DEBUG_DEVICE_INFORMATION Dbg2DeviceInfo[RPI_DBG2_NUM_DEBUG_PORTS];
+} DBG2_TABLE;
+
+#pragma pack()
+#endif //__RPI_DEBUG_PORT_2_H__
+
--
2.31.0.windows.1
next reply other threads:[~2021-03-24 9:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-24 9:45 Sunny Wang [this message]
2021-03-24 9:45 ` [PATCH v2 2/2] Platform/RaspberryPi: Enable Bluetooth and UART in Windows OS Sunny Wang
2021-03-24 19:50 ` Jeremy Linton
2021-03-26 14:33 ` [edk2-devel] " Mario Bălănică
2021-03-24 12:44 ` [PATCH v2 1/2] Platform/RaspberryPi: Dynamically build UARTs info in ACPI Pete Batard
2021-03-24 19:40 ` Jeremy Linton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210324094524.184-1-Sunny.Wang@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox