[edk2-platforms][PATCH v1 07/35] IntelSiliconPkg: Add PCH SPI Protocol

["Michael Kubacki" <mikuback@linux.microsoft.com>]

From: Michael Kubacki <michael.kubacki@microsoft.com>

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3307

These SPI Protocol definitions are intended to serve as the single
definitions for Intel platform and silicon packages.

1. gPchSpiProtocolGuid
2. gPchSmmSpiProtocolGuid

Cc: Ray Ni <ray.ni@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
---
 Silicon/Intel/IntelSiliconPkg/Include/Protocol/Spi.h | 301 ++++++++++++++++++++
 Silicon/Intel/IntelSiliconPkg/IntelSiliconPkg.dec    |   5 +
 2 files changed, 306 insertions(+)

diff --git a/Silicon/Intel/IntelSiliconPkg/Include/Protocol/Spi.h b/Silicon/Intel/IntelSiliconPkg/Include/Protocol/Spi.h
new file mode 100644
index 000000000000..c13dc5a5f5f5
--- /dev/null
+++ b/Silicon/Intel/IntelSiliconPkg/Include/Protocol/Spi.h
@@ -0,0 +1,301 @@
+/** @file
+  This file defines the PCH SPI Protocol which implements the
+  Intel(R) PCH SPI Host Controller Compatibility Interface.
+
+  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _PCH_SPI_PROTOCOL_H_
+#define _PCH_SPI_PROTOCOL_H_
+
+//
+// Extern the GUID for protocol users.
+//
+extern EFI_GUID                   gPchSpiProtocolGuid;
+extern EFI_GUID                   gPchSmmSpiProtocolGuid;
+
+//
+// Forward reference for ANSI C compatibility
+//
+typedef struct _PCH_SPI_PROTOCOL  PCH_SPI_PROTOCOL;
+
+//
+// SPI protocol data structures and definitions
+//
+
+/**
+  Flash Region Type
+**/
+typedef enum {
+  FlashRegionDescriptor,
+  FlashRegionBios,
+  FlashRegionMe,
+  FlashRegionGbE,
+  FlashRegionPlatformData,
+  FlashRegionDer,
+  FlashRegionSecondaryBios,
+  FlashRegionuCodePatch,
+  FlashRegionEC,
+  FlashRegionDeviceExpansion2,
+  FlashRegionIE,
+  FlashRegion10Gbe_A,
+  FlashRegion10Gbe_B,
+  FlashRegion13,
+  FlashRegion14,
+  FlashRegion15,
+  FlashRegionAll,
+  FlashRegionMax
+} FLASH_REGION_TYPE;
+//
+// Protocol member functions
+//
+
+/**
+  Read data from the flash part.
+
+  @param[in] This                 Pointer to the PCH_SPI_PROTOCOL instance.
+  @param[in] FlashRegionType      The Flash Region type for flash cycle which is listed in the Descriptor.
+  @param[in] Address              The Flash Linear Address must fall within a region for which BIOS has access permissions.
+  @param[in] ByteCount            Number of bytes in the data portion of the SPI cycle.
+  @param[out] Buffer              The Pointer to caller-allocated buffer containing the dada received.
+                                  It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+  @retval EFI_SUCCESS             Command succeed.
+  @retval EFI_INVALID_PARAMETER   The parameters specified are not valid.
+  @retval EFI_DEVICE_ERROR        Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_READ) (
+  IN     PCH_SPI_PROTOCOL   *This,
+  IN     FLASH_REGION_TYPE  FlashRegionType,
+  IN     UINT32             Address,
+  IN     UINT32             ByteCount,
+  OUT    UINT8              *Buffer
+  );
+
+/**
+  Write data to the flash part. Remark: Erase may be needed before write to the flash part.
+
+  @param[in] This                 Pointer to the PCH_SPI_PROTOCOL instance.
+  @param[in] FlashRegionType      The Flash Region type for flash cycle which is listed in the Descriptor.
+  @param[in] Address              The Flash Linear Address must fall within a region for which BIOS has access permissions.
+  @param[in] ByteCount            Number of bytes in the data portion of the SPI cycle.
+  @param[in] Buffer               Pointer to caller-allocated buffer containing the data sent during the SPI cycle.
+
+  @retval EFI_SUCCESS             Command succeed.
+  @retval EFI_INVALID_PARAMETER   The parameters specified are not valid.
+  @retval EFI_DEVICE_ERROR        Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_WRITE) (
+  IN     PCH_SPI_PROTOCOL   *This,
+  IN     FLASH_REGION_TYPE  FlashRegionType,
+  IN     UINT32             Address,
+  IN     UINT32             ByteCount,
+  IN     UINT8              *Buffer
+  );
+
+/**
+  Erase some area on the flash part.
+
+  @param[in] This                 Pointer to the PCH_SPI_PROTOCOL instance.
+  @param[in] FlashRegionType      The Flash Region type for flash cycle which is listed in the Descriptor.
+  @param[in] Address              The Flash Linear Address must fall within a region for which BIOS has access permissions.
+  @param[in] ByteCount            Number of bytes in the data portion of the SPI cycle.
+
+  @retval EFI_SUCCESS             Command succeed.
+  @retval EFI_INVALID_PARAMETER   The parameters specified are not valid.
+  @retval EFI_DEVICE_ERROR        Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_ERASE) (
+  IN     PCH_SPI_PROTOCOL   *This,
+  IN     FLASH_REGION_TYPE  FlashRegionType,
+  IN     UINT32             Address,
+  IN     UINT32             ByteCount
+  );
+
+/**
+  Read SFDP data from the flash part.
+
+  @param[in] This                 Pointer to the PCH_SPI_PROTOCOL instance.
+  @param[in] ComponentNumber      The Componen Number for chip select
+  @param[in] Address              The starting byte address for SFDP data read.
+  @param[in] ByteCount            Number of bytes in SFDP data portion of the SPI cycle
+  @param[out] SfdpData            The Pointer to caller-allocated buffer containing the SFDP data received
+                                  It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read
+
+  @retval EFI_SUCCESS             Command succeed.
+  @retval EFI_INVALID_PARAMETER   The parameters specified are not valid.
+  @retval EFI_DEVICE_ERROR        Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_READ_SFDP) (
+  IN     PCH_SPI_PROTOCOL   *This,
+  IN     UINT8              ComponentNumber,
+  IN     UINT32             Address,
+  IN     UINT32             ByteCount,
+  OUT    UINT8              *SfdpData
+  );
+
+/**
+  Read Jedec Id from the flash part.
+
+  @param[in] This                 Pointer to the PCH_SPI_PROTOCOL instance.
+  @param[in] ComponentNumber      The Componen Number for chip select
+  @param[in] ByteCount            Number of bytes in JedecId data portion of the SPI cycle, the data size is 3 typically
+  @param[out] JedecId             The Pointer to caller-allocated buffer containing JEDEC ID received
+                                  It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+  @retval EFI_SUCCESS             Command succeed.
+  @retval EFI_INVALID_PARAMETER   The parameters specified are not valid.
+  @retval EFI_DEVICE_ERROR        Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_READ_JEDEC_ID) (
+  IN     PCH_SPI_PROTOCOL   *This,
+  IN     UINT8              ComponentNumber,
+  IN     UINT32             ByteCount,
+  OUT    UINT8              *JedecId
+  );
+
+/**
+  Write the status register in the flash part.
+
+  @param[in] This                 Pointer to the PCH_SPI_PROTOCOL instance.
+  @param[in] ByteCount            Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
+  @param[in] StatusValue          The Pointer to caller-allocated buffer containing the value of Status register writing
+
+  @retval EFI_SUCCESS             Command succeed.
+  @retval EFI_INVALID_PARAMETER   The parameters specified are not valid.
+  @retval EFI_DEVICE_ERROR        Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_WRITE_STATUS) (
+  IN     PCH_SPI_PROTOCOL   *This,
+  IN     UINT32             ByteCount,
+  IN     UINT8              *StatusValue
+  );
+
+/**
+  Read status register in the flash part.
+
+  @param[in] This                 Pointer to the PCH_SPI_PROTOCOL instance.
+  @param[in] ByteCount            Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
+  @param[out] StatusValue         The Pointer to caller-allocated buffer containing the value of Status register received.
+
+  @retval EFI_SUCCESS             Command succeed.
+  @retval EFI_INVALID_PARAMETER   The parameters specified are not valid.
+  @retval EFI_DEVICE_ERROR        Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_READ_STATUS) (
+  IN     PCH_SPI_PROTOCOL   *This,
+  IN     UINT32             ByteCount,
+  OUT    UINT8              *StatusValue
+  );
+
+/**
+  Get the SPI region base and size, based on the enum type
+
+  @param[in] This                 Pointer to the PCH_SPI_PROTOCOL instance.
+  @param[in] FlashRegionType      The Flash Region type for for the base address which is listed in the Descriptor.
+  @param[out] BaseAddress         The Flash Linear Address for the Region 'n' Base
+  @param[out] RegionSize          The size for the Region 'n'
+
+  @retval EFI_SUCCESS             Read success
+  @retval EFI_INVALID_PARAMETER   Invalid region type given
+  @retval EFI_DEVICE_ERROR        The region is not used
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_GET_REGION_ADDRESS) (
+  IN     PCH_SPI_PROTOCOL   *This,
+  IN     FLASH_REGION_TYPE  FlashRegionType,
+  OUT    UINT32             *BaseAddress,
+  OUT    UINT32             *RegionSize
+  );
+
+/**
+  Read PCH Soft Strap Values
+
+  @param[in] This                 Pointer to the PCH_SPI_PROTOCOL instance.
+  @param[in] SoftStrapAddr        PCH Soft Strap address offset from FPSBA.
+  @param[in] ByteCount            Number of bytes in SoftStrap data portion of the SPI cycle
+  @param[out] SoftStrapValue      The Pointer to caller-allocated buffer containing PCH Soft Strap Value.
+                                  If the value of ByteCount is 0, the data type of SoftStrapValue should be UINT16 and SoftStrapValue will be PCH Soft Strap Length
+                                  It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+  @retval EFI_SUCCESS             Command succeed.
+  @retval EFI_INVALID_PARAMETER   The parameters specified are not valid.
+  @retval EFI_DEVICE_ERROR        Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_READ_PCH_SOFTSTRAP) (
+  IN     PCH_SPI_PROTOCOL   *This,
+  IN     UINT32             SoftStrapAddr,
+  IN     UINT32             ByteCount,
+  OUT    VOID               *SoftStrapValue
+  );
+
+/**
+  Read CPU Soft Strap Values
+
+  @param[in] This                 Pointer to the PCH_SPI_PROTOCOL instance.
+  @param[in] SoftStrapAddr        CPU Soft Strap address offset from FCPUSBA.
+  @param[in] ByteCount            Number of bytes in SoftStrap data portion of the SPI cycle.
+  @param[out] SoftStrapValue      The Pointer to caller-allocated buffer containing CPU Soft Strap Value.
+                                  If the value of ByteCount is 0, the data type of SoftStrapValue should be UINT16 and SoftStrapValue will be PCH Soft Strap Length
+                                  It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+  @retval EFI_SUCCESS             Command succeed.
+  @retval EFI_INVALID_PARAMETER   The parameters specified are not valid.
+  @retval EFI_DEVICE_ERROR        Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_READ_CPU_SOFTSTRAP) (
+  IN     PCH_SPI_PROTOCOL   *This,
+  IN     UINT32             SoftStrapAddr,
+  IN     UINT32             ByteCount,
+  OUT    VOID               *SoftStrapValue
+  );
+
+/**
+  These protocols/PPI allows a platform module to perform SPI operations through the
+  Intel PCH SPI Host Controller Interface.
+**/
+struct _PCH_SPI_PROTOCOL {
+  /**
+    This member specifies the revision of this structure. This field is used to
+    indicate backwards compatible changes to the protocol.
+  **/
+  UINT8                             Revision;
+  PCH_SPI_FLASH_READ                FlashRead;          ///< Read data from the flash part.
+  PCH_SPI_FLASH_WRITE               FlashWrite;         ///< Write data to the flash part. Remark: Erase may be needed before write to the flash part.
+  PCH_SPI_FLASH_ERASE               FlashErase;         ///< Erase some area on the flash part.
+  PCH_SPI_FLASH_READ_SFDP           FlashReadSfdp;      ///< Read SFDP data from the flash part.
+  PCH_SPI_FLASH_READ_JEDEC_ID       FlashReadJedecId;   ///< Read Jedec Id from the flash part.
+  PCH_SPI_FLASH_WRITE_STATUS        FlashWriteStatus;   ///< Write the status register in the flash part.
+  PCH_SPI_FLASH_READ_STATUS         FlashReadStatus;    ///< Read status register in the flash part.
+  PCH_SPI_GET_REGION_ADDRESS        GetRegionAddress;   ///< Get the SPI region base and size
+  PCH_SPI_READ_PCH_SOFTSTRAP        ReadPchSoftStrap;   ///< Read PCH Soft Strap Values
+  PCH_SPI_READ_CPU_SOFTSTRAP        ReadCpuSoftStrap;   ///< Read CPU Soft Strap Values
+};
+
+/**
+  PCH SPI PPI/PROTOCOL revision number
+
+  Revision 1:   Initial version
+**/
+#define PCH_SPI_SERVICES_REVISION       1
+
+#endif
diff --git a/Silicon/Intel/IntelSiliconPkg/IntelSiliconPkg.dec b/Silicon/Intel/IntelSiliconPkg/IntelSiliconPkg.dec
index 4a1eee3a5077..a2958b7eca23 100644
--- a/Silicon/Intel/IntelSiliconPkg/IntelSiliconPkg.dec
+++ b/Silicon/Intel/IntelSiliconPkg/IntelSiliconPkg.dec
@@ -74,6 +74,11 @@ [Ppis]
   gEdkiiVTdNullRootEntryTableGuid = { 0x3de0593f, 0x6e3e, 0x4542, { 0xa1, 0xcb, 0xcb, 0xb2, 0xdb, 0xeb, 0xd8, 0xff } }
 
 [Protocols]
+  ## Protocols that provide services for the Intel(R) PCH SPI Host Controller Compatibility Interface
+  # Include/Protocol/Spi.h
+  gPchSpiProtocolGuid  =  {0xc7d289, 0x1347, 0x4de0, {0xbf, 0x42, 0xe, 0x26, 0x9d, 0xe, 0xf3, 0x4a}}
+  gPchSmmSpiProtocolGuid = {0x56521f06, 0xa62, 0x4822, {0x99, 0x63, 0xdf, 0x1, 0x9d, 0x72, 0xc7, 0xe1}}
+
   gEdkiiPlatformVTdPolicyProtocolGuid = { 0x3d17e448, 0x466, 0x4e20, { 0x99, 0x9f, 0xb2, 0xe1, 0x34, 0x88, 0xee, 0x22 }}
 
   ## Protocol for device security policy.
-- 
2.28.0.windows.1