From: "Pranav Madhu" <pranav.madhu@arm.com>
To: devel@edk2.groups.io
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>,
Sami Mujawar <sami.mujawar@arm.com>
Subject: [edk2-platforms][PATCH V1 10/17] Platform/Sgi: Macro definitions for ACPI CPPC
Date: Wed, 28 Apr 2021 18:05:53 +0530 [thread overview]
Message-ID: <20210428123600.2385-11-pranav.madhu@arm.com> (raw)
In-Reply-To: <20210428123600.2385-1-pranav.madhu@arm.com>
Add helper macros required for use with ACPI collaborative processor
performance control (CPPC). This patch adds macros for initializing ACPI
_CPC and _PSD control method. The CPC initializer macro initializes _CPC
control method with revision 3 as specified in Arm FFH specification
1.1. The CPC initilizer exposes the reference performance counter and
delivered perfrmance counter (AMU registers) as FFixedHW registers. The
initilizer also expose the fastchannel memories for performance level
set performance limit set protocols as desired performance register and
performance limited register respectively.
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
---
| 53 ++++++++++++++++++++
1 file changed, 53 insertions(+)
--git a/Platform/ARM/SgiPkg/Include/SgiAcpiHeader.h b/Platform/ARM/SgiPkg/Include/SgiAcpiHeader.h
index 4977d4d898aa..1b5305f15fb8 100644
--- a/Platform/ARM/SgiPkg/Include/SgiAcpiHeader.h
+++ b/Platform/ARM/SgiPkg/Include/SgiAcpiHeader.h
@@ -423,4 +423,57 @@ typedef struct {
LineSize /* Line size in bytes */ \
}
+// CPPC _CPC object initialization
+#define CPPC_PACKAGE_INIT(DesiredPerfReg, PerfLimitedReg, GranularityMHz, \
+ HighestPerf, NominalPerf, LowestNonlinearPerf, LowestPerf, RefPerf) \
+ { \
+ 23, /* NumEntries */ \
+ 3, /* Revision */ \
+ HighestPerf, /* Highest Performance */ \
+ NominalPerf, /* Nominal Performance */ \
+ LowestNonlinearPerf, /* Lowest Nonlinear Performance */ \
+ LowestPerf, /* Lowest Performance */ \
+ /* Guaranteed Performance Register */ \
+ ResourceTemplate () { Register (SystemMemory, 0, 0, 0, 0) }, \
+ /* Desired Performance Register */ \
+ ResourceTemplate () { Register (SystemMemory, 32, 0, DesiredPerfReg, 3) }, \
+ /* Minimum Performance Register */ \
+ ResourceTemplate () { Register (SystemMemory, 0, 0, 0, 0) }, \
+ /* Maximum Performance Register */ \
+ ResourceTemplate () { Register (SystemMemory, 0, 0, 0, 0) }, \
+ /* Performance Reduction Tolerance Register */ \
+ ResourceTemplate () { Register (SystemMemory, 0, 0, 0, 0) }, \
+ /* Time Window Register */ \
+ ResourceTemplate () { Register (SystemMemory, 0, 0, 0, 0) }, \
+ /* Counter Wraparound Time */ \
+ ResourceTemplate () { Register (SystemMemory, 0, 0, 0, 0) }, \
+ /* Reference Performance Counter Register */ \
+ ResourceTemplate () { Register (FFixedHW, 64, 0, 1, 4) }, \
+ /* Delivered Performance Counter Register */ \
+ ResourceTemplate () { Register (FFixedHW, 64, 0, 0, 4) }, \
+ /* Performance Limited Register */ \
+ ResourceTemplate () { Register (SystemMemory, 32, 0, PerfLimitedReg, 3) }, \
+ /* CPPC Enable Register */ \
+ ResourceTemplate () { Register (SystemMemory, 0, 0, 0, 0) }, \
+ /* Autonomous Selection Enable Register */ \
+ ResourceTemplate () { Register (SystemMemory, 0, 0, 0, 0) }, \
+ /* Autonomous Activity Window Register */ \
+ ResourceTemplate () { Register (SystemMemory, 0, 0, 0, 0) }, \
+ /* Energy Performance Preference Register */ \
+ ResourceTemplate () { Register (SystemMemory, 0, 0, 0, 0) }, \
+ RefPerf, /* Reference Performance */ \
+ (LowestPerf * GranularityMHz), /* Lowest Frequency */ \
+ (NominalPerf * GranularityMHz), /* Nominal Frequency */ \
+ }
+
+// Power state dependancy (_PSD) for CPPC
+#define PSD_INIT(Domain) \
+ { \
+ 5, /* Entries */ \
+ 0, /* Revision */ \
+ Domain, /* Domain */ \
+ 0xFD, /* Coord Type- SW_ANY */ \
+ 1 /* Processors */ \
+ }
+
#endif /* __SGI_ACPI_HEADER__ */
--
2.17.1
next prev parent reply other threads:[~2021-04-28 12:36 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-28 12:35 [edk2-platforms][PATCH V1 00/17] Enable idle state and CPPC support for RD platform Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 01/17] Platform/Sgi: Macro definitions for ACPI _OSC Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 02/17] Platform/Sgi: Add CPU container for SGI-575 Pranav Madhu
2021-05-10 9:12 ` Sami Mujawar
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 03/17] Platform/Sgi: Low Power Idle states " Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 04/17] Platform/Sgi: Add CPU container for RD-N1-Edge Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 05/17] Platform/Sgi: Low Power Idle states " Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 06/17] Platform/Sgi: Add DSDT ACPI table for RD-N1-Edge dual-chip platform Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 07/17] Platform/Sgi: Low Power Idle States for RD-N1-Edge dual-chip Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 08/17] Platform/Sgi: Add CPU container for RD-V1 platform Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 09/17] Platform/Sgi: Low Power Idle states " Pranav Madhu
2021-04-28 12:35 ` Pranav Madhu [this message]
2021-05-10 9:12 ` [edk2-platforms][PATCH V1 10/17] Platform/Sgi: Macro definitions for ACPI CPPC Sami Mujawar
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 11/17] Platform/Sgi: ACPI CPPC support for RD-V1 Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 12/17] Platform/Sgi: Add CPU container for RD-V1 quad-chip platform Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 13/17] Platform/Sgi: Low Power Idle States " Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 14/17] Platform/Sgi: ACPI CPPC support " Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 15/17] Platform/Sgi: Add CPU container for RD-N2 platform Pranav Madhu
2021-04-28 12:35 ` [edk2-platforms][PATCH V1 16/17] Platform/Sgi: Low Power Idle States for RD-N2 Pranav Madhu
2021-04-28 12:36 ` [edk2-platforms][PATCH V1 17/17] Platform/Sgi: ACPI CPPC support " Pranav Madhu
2021-05-03 14:29 ` [edk2-devel] [edk2-platforms][PATCH V1 00/17] Enable idle state and CPPC support for RD platform Thomas Abraham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210428123600.2385-11-pranav.madhu@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox