[PATCH 3/5] GenGv: Arm: support images entered in Thumb mode

["Etienne Carriere" <etienne.carriere@linaro.org>]

Change GenFv for Arm architecture to generate a specific jump
instruction as image entry instruction, when the target entry label
is assembled with Thumb instruction set. This is possible since
SecCoreEntryAddress value fetched from the PE32 as its LSBit set when
the entry instruction executes in Thumb mode.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Achin Gupta <achin.gupta@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
---
 BaseTools/Source/C/GenFv/GenFvInternalLib.c | 38 +++++++++++++++-----
 1 file changed, 29 insertions(+), 9 deletions(-)

diff --git a/BaseTools/Source/C/GenFv/GenFvInternalLib.c b/BaseTools/Source/C/GenFv/GenFvInternalLib.c
index 6e296b8ad6..3af65146f6 100644
--- a/BaseTools/Source/C/GenFv/GenFvInternalLib.c
+++ b/BaseTools/Source/C/GenFv/GenFvInternalLib.c
@@ -34,9 +34,27 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
 #include "FvLib.h"
 #include "PeCoffLib.h"
 
-#define ARMT_UNCONDITIONAL_JUMP_INSTRUCTION       0xEB000000
 #define ARM64_UNCONDITIONAL_JUMP_INSTRUCTION      0x14000000
 
+/*
+ * Arm instruction to jump to Fv enry instruction in Arm or Thumb mode.
+ * From ARM Arch Ref Manual versions b/c/d, section A8.8.25 BL, BLX (immediate)
+ * BLX (encoding A2) branches to offset in Thumb instruction set mode.
+ * BL (encoding A1) branches to offset in Arm instruction set mode.
+ */
+#define ARM_JUMP_OFFSET_MAX        0xffffff
+#define ARM_JUMP_TO_ARM(Offset)    (0xeb000000 | ((Offset - 8) >> 2))
+
+#define _ARM_JUMP_TO_THUMB(Imm32)  (0xfa000000 | \
+                                    (((Imm32) & (1 << 1)) << (24 - 1)) | \
+                                    (((Imm32) >> 2) & 0x7fffff))
+#define ARM_JUMP_TO_THUMB(Offset)  _ARM_JUMP_TO_THUMB((Offset) - 8)
+
+/*
+ * Arm instruction to retrun from exception (MOVS PC, LR)
+ */
+#define ARM_RETURN_FROM_EXCEPTION  0xE1B0F07E
+
 BOOLEAN mArm = FALSE;
 BOOLEAN mRiscV = FALSE;
 STATIC UINT32   MaxFfsAlignment = 0;
@@ -2203,23 +2221,25 @@ Returns:
     // if we found an SEC core entry point then generate a branch instruction
     // to it and populate a debugger SWI entry as well
     if (UpdateVectorSec) {
+      UINT32                    EntryOffset;
 
       VerboseMsg("UpdateArmResetVectorIfNeeded updating ARM SEC vector");
 
-      // B SecEntryPoint - signed_immed_24 part +/-32MB offset
-      // on ARM, the PC is always 8 ahead, so we're not really jumping from the base address, but from base address + 8
-      ResetVector[0] = (INT32)(SecCoreEntryAddress - FvInfo->BaseAddress - 8) >> 2;
+      EntryOffset = (INT32)(SecCoreEntryAddress - FvInfo->BaseAddress);
 
-      if (ResetVector[0] > 0x00FFFFFF) {
-        Error(NULL, 0, 3000, "Invalid", "SEC Entry point must be within 32MB of the start of the FV");
+      if (EntryOffset > ARM_JUMP_OFFSET_MAX) {
+          Error(NULL, 0, 3000, "Invalid", "SEC Entry point offset above 1MB of the start of the FV");
         return EFI_ABORTED;
       }
 
-      // Add opcode for an unconditional branch with no link. i.e.: " B SecEntryPoint"
-      ResetVector[0] |= ARMT_UNCONDITIONAL_JUMP_INSTRUCTION;
+      if (SecCoreEntryAddress & 1) {
+        ResetVector[0] = ARM_JUMP_TO_THUMB(EntryOffset);
+      } else {
+        ResetVector[0] = ARM_JUMP_TO_ARM(EntryOffset);
+      }
 
       // SWI handler movs   pc,lr. Just in case a debugger uses SWI
-      ResetVector[2] = 0xE1B0F07E;
+      ResetVector[2] = ARM_RETURN_FROM_EXCEPTION;
 
       // Place holder to support a common interrupt handler from ROM.
       // Currently not supported. For this to be used the reset vector would not be in this FV
-- 
2.17.1