From: "Nhi Pham" <nhi@os.amperecomputing.com>
To: devel@edk2.groups.io
Cc: Vu Nguyen <vunguyen@os.amperecomputing.com>,
Thang Nguyen <thang@os.amperecomputing.com>,
Chuong Tran <chuong@os.amperecomputing.com>,
Phong Vo <phong@os.amperecomputing.com>,
Leif Lindholm <leif@nuviainc.com>,
Michael D Kinney <michael.d.kinney@intel.com>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Nate DeSimone <nathaniel.l.desimone@intel.com>
Subject: [edk2-platforms][PATCH v2 06/32] AmpereAltraPkg: Add DwGpioLib library
Date: Wed, 26 May 2021 17:06:58 +0700 [thread overview]
Message-ID: <20210526100724.5359-8-nhi@os.amperecomputing.com> (raw)
In-Reply-To: <20210526100724.5359-1-nhi@os.amperecomputing.com>
From: Vu Nguyen <vunguyen@os.amperecomputing.com>
The DwGpioLib library provides basic functions to control the GPIO
controller on Ampere Altra processor.
Cc: Thang Nguyen <thang@os.amperecomputing.com>
Cc: Chuong Tran <chuong@os.amperecomputing.com>
Cc: Phong Vo <phong@os.amperecomputing.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Vu Nguyen <vunguyen@os.amperecomputing.com>
---
Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec | 3 +
Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf | 33 ++
Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h | 76 +++++
Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c | 314 ++++++++++++++++++++
4 files changed, 426 insertions(+)
diff --git a/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec b/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
index 8be6a329bb26..be827dd19a96 100644
--- a/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
+++ b/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
@@ -31,6 +31,9 @@ [LibraryClasses]
## @libraryclass Defines a set of methods to read/write to I2C devices.
I2cLib|Silicon/Ampere/AmpereAltraPkg/Include/Library/I2cLib.h
+ ## @libraryclass Defines a set of methods to get/set GPIO.
+ GpioLib|Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h
+
## @libraryclass Defines a set of methods to communicate with secure parition over MM interface.
MmCommunicationLib|Silicon/Ampere/AmpereAltraPkg/Include/Library/MmCommunicationLib.h
diff --git a/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf
new file mode 100644
index 000000000000..36ce0c3be2c8
--- /dev/null
+++ b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf
@@ -0,0 +1,33 @@
+## @file
+# Component description for DwGpioLib library for the Designware GPIO controller.
+#
+# Copyright (c) 2020 - 2021, Ampere Computing LLC. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = DwGpioLib
+ FILE_GUID = E7D9CAE1-6930-46E3-BDF9-0027446E7DF2
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = GpioLib
+
+[Sources.common]
+ DwGpioLib.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ IoLib
+
+[Guids]
+ gEfiEventVirtualAddressChangeGuid
diff --git a/Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h b/Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h
new file mode 100755
index 000000000000..cb201bc98322
--- /dev/null
+++ b/Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h
@@ -0,0 +1,76 @@
+/** @file
+ Library implementation for the Designware GPIO controller.
+
+ Copyright (c) 2020 - 2021, Ampere Computing LLC. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef GPIO_LIB_H_
+#define GPIO_LIB_H_
+
+enum SocGpioConfigMode {
+ GPIO_CONFIG_OUT_LOW = 0,
+ GPIO_CONFIG_OUT_HI,
+ GPIO_CONFIG_OUT_LOW_TO_HIGH,
+ GPIO_CONFIG_OUT_HIGH_TO_LOW,
+ GPIO_CONFIG_IN,
+ MAX_GPIO_CONFIG_MODE
+};
+
+/*
+ * GpioWriteBit: Use to Set/Clear GPIOs
+ * Input:
+ * Pin : Pin Identification
+ * Val : 1 to Set, 0 to Clear
+ */
+VOID
+EFIAPI
+GpioWriteBit (
+ IN UINT32 Pin,
+ IN UINT32 Val
+ );
+
+/*
+ * GpioReadBit:
+ * Input:
+ * Pin : Pin Identification
+ * Return:
+ * 1 : On/High
+ * 0 : Off/Low
+ */
+UINTN
+EFIAPI
+GpioReadBit (
+ IN UINT32 Pin
+ );
+
+/*
+ * GpioModeConfig: Use to configure GPIOs as Input/Output
+ * Input:
+ * Pin : Pin Identification
+ * InOut : GPIO_OUT/1 as Output
+ * GPIO_IN/0 as Input
+ */
+EFI_STATUS
+EFIAPI
+GpioModeConfig (
+ UINT8 Pin,
+ UINTN Mode
+ );
+
+/*
+ * Setup a controller that to be used in runtime service.
+ * Input:
+ * Pin: Pin belongs to the controller.
+ * return: 0 for success.
+ * Otherwise, error code.
+ */
+EFI_STATUS
+EFIAPI
+GpioSetupRuntime (
+ IN UINT32 Pin
+ );
+
+#endif /* GPIO_LIB_H_ */
diff --git a/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c
new file mode 100644
index 000000000000..dbb53f7d57d2
--- /dev/null
+++ b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c
@@ -0,0 +1,314 @@
+/** @file
+
+ Copyright (c) 2020 - 2021, Ampere Computing LLC. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiDxe.h>
+#include <Uefi.h>
+
+#include <Library/DebugLib.h>
+#include <Library/GpioLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/IoLib.h>
+#include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeLib.h>
+#include <Platform/Ac01.h>
+
+/* Runtime needs to be 64K alignment */
+#define RUNTIME_ADDRESS_MASK (~(SIZE_64KB - 1))
+#define RUNTIME_ADDRESS_LENGTH SIZE_64KB
+
+#define GPIO_MUX_VAL(Gpio) (0x00000001 << (Gpio))
+#define GPIO_IN 0
+#define GPIO_OUT 1
+
+/* Address GPIO_REG Registers */
+#define GPIO_SWPORTA_DR_ADDR 0x00000000
+#define GPIO_SWPORTA_DDR_ADDR 0x00000004
+#define GPIO_EXT_PORTA_ADDR 0x00000050
+
+STATIC UINT64 GpioBaseAddr[] = { GPIO_DWAPB_BASE_ADDR };
+STATIC UINT64 GpiBaseAddr[] = { GPI_DWAPB_BASE_ADDR };
+STATIC BOOLEAN GpioRuntimeEnableArray[sizeof (GpioBaseAddr) / sizeof (GpioBaseAddr[0])] = { FALSE };
+STATIC EFI_EVENT mVirtualAddressChangeEvent = NULL;
+
+UINT64
+GetBaseAddr (
+ IN UINT32 Pin
+ )
+{
+ UINT32 NumberOfControllers = sizeof (GpioBaseAddr) / sizeof (GpioBaseAddr[0]);
+ UINT32 TotalPins = GPIO_DWAPB_PINS_PER_CONTROLLER * NumberOfControllers;
+
+ if (NumberOfControllers == 0 || Pin >= TotalPins) {
+ return 0;
+ }
+
+ return GpioBaseAddr[Pin / GPIO_DWAPB_PINS_PER_CONTROLLER];
+}
+
+VOID
+GpioWrite (
+ IN UINT64 Base,
+ IN UINT32 Val
+ )
+{
+ MmioWrite32 ((UINTN)Base, Val);
+}
+
+VOID
+GpioRead (
+ IN UINT64 Base,
+ OUT UINT32 *Val
+ )
+{
+ ASSERT (Val != NULL);
+ *Val = MmioRead32 (Base);
+}
+
+VOID
+EFIAPI
+GpioWriteBit (
+ IN UINT32 Pin,
+ IN UINT32 Val
+ )
+{
+ UINT64 Reg;
+ UINT32 GpioPin;
+ UINT32 ReadVal;
+
+ Reg = GetBaseAddr (Pin);
+ if (Reg == 0) {
+ return;
+ }
+
+ GpioPin = Pin % GPIO_DWAPB_PINS_PER_CONTROLLER;
+
+ Reg += GPIO_SWPORTA_DR_ADDR;
+ GpioRead (Reg, &ReadVal);
+
+ if (Val != 0) {
+ GpioWrite (Reg, ReadVal | GPIO_MUX_VAL (GpioPin));
+ } else {
+ GpioWrite (Reg, ReadVal & ~GPIO_MUX_VAL (GpioPin));
+ }
+}
+
+UINTN
+EFIAPI
+GpioReadBit (
+ IN UINT32 Pin
+ )
+{
+ UINT64 Reg;
+ UINT32 Val;
+ UINT32 GpioPin;
+ UINT8 Index;
+ UINT32 MaxIndex;
+
+ Reg = GetBaseAddr (Pin);
+ if (Reg == 0) {
+ return 0;
+ }
+
+ GpioPin = Pin % GPIO_DWAPB_PINS_PER_CONTROLLER;
+
+ /* Check if a base address is GPI */
+ MaxIndex = sizeof (GpiBaseAddr) / sizeof (GpiBaseAddr[0]);
+ for (Index = 0; Index < MaxIndex; Index++) {
+ if (Reg == GpiBaseAddr[Index]) {
+ break;
+ }
+ }
+ if (Index == MaxIndex) {
+ /* Only GPIO has GPIO_EXT_PORTA register, not for GPI */
+ Reg += GPIO_EXT_PORTA_ADDR;
+ }
+
+ GpioRead (Reg, &Val);
+
+ return Val & GPIO_MUX_VAL (GpioPin) ? 1 : 0;
+}
+
+EFI_STATUS
+GpioConfig (
+ IN UINT32 Pin,
+ IN UINT32 InOut
+ )
+{
+ INTN GpioPin;
+ UINT32 Val;
+ UINT64 Reg;
+
+ /*
+ * Caculate GPIO Pin Number for Direction Register
+ * GPIO_SWPORTA_DDR for GPIO[31...0]
+ * GPIO_SWPORTB_DDR for GPIO[51...32]
+ */
+
+ Reg = GetBaseAddr (Pin);
+ if (Reg == 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ Reg += GPIO_SWPORTA_DDR_ADDR;
+ GpioPin = Pin % GPIO_DWAPB_PINS_PER_CONTROLLER;
+ GpioRead (Reg, &Val);
+
+ if (InOut == GPIO_OUT) {
+ Val |= GPIO_MUX_VAL (GpioPin);
+ } else {
+ Val &= ~GPIO_MUX_VAL (GpioPin);
+ }
+ GpioWrite (Reg, Val);
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+GpioModeConfig (
+ UINT8 Pin,
+ UINTN Mode
+ )
+{
+ UINT32 NumberOfControllers = sizeof (GpioBaseAddr) / sizeof (UINT64);
+ UINT32 NumersOfPins = NumberOfControllers * GPIO_DWAPB_PINS_PER_CONTROLLER;
+ UINT32 Delay = 10;
+
+ if (Mode < GPIO_CONFIG_OUT_LOW
+ || Mode >= MAX_GPIO_CONFIG_MODE
+ || Pin > NumersOfPins - 1
+ || Pin < 0)
+ {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ switch (Mode) {
+ case GPIO_CONFIG_OUT_LOW:
+ GpioConfig (Pin, GPIO_OUT);
+ GpioWriteBit (Pin, 0);
+ DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output low\n", Pin));
+ break;
+
+ case GPIO_CONFIG_OUT_HI:
+ GpioConfig (Pin, GPIO_OUT);
+ GpioWriteBit (Pin, 1);
+ DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output high\n", Pin));
+ break;
+
+ case GPIO_CONFIG_OUT_LOW_TO_HIGH:
+ GpioConfig (Pin, GPIO_OUT);
+ GpioWriteBit (Pin, 0);
+ MicroSecondDelay (1000 * Delay);
+ GpioWriteBit (Pin, 1);
+ DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output low->high\n", Pin));
+ break;
+
+ case GPIO_CONFIG_OUT_HIGH_TO_LOW:
+ GpioConfig (Pin, GPIO_OUT);
+ GpioWriteBit (Pin, 1);
+ MicroSecondDelay (1000 * Delay);
+ GpioWriteBit (Pin, 0);
+ DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output high->low\n", Pin));
+ break;
+
+ case GPIO_CONFIG_IN:
+ GpioConfig (Pin, GPIO_IN);
+ DEBUG ((DEBUG_INFO, "GPIO pin %d configured as input\n", Pin));
+ break;
+
+ default:
+ break;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ * Notification function of EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE.
+ *
+ * This is a notification function registered on EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event.
+ * It convers pointer to new virtual address.
+ *
+ * @param Event Event whose notification function is being invoked.
+ * @param Context Pointer to the notification function's context.
+ */
+VOID
+EFIAPI
+GpioVirtualAddressChangeEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ UINTN Count;
+
+ EfiConvertPointer (0x0, (VOID **)&GpioBaseAddr);
+ for (Count = 0; Count < sizeof (GpioBaseAddr) / sizeof (GpioBaseAddr[0]); Count++) {
+ if (!GpioRuntimeEnableArray[Count]) {
+ continue;
+ }
+ EfiConvertPointer (0x0, (VOID **)&GpioBaseAddr[Count]);
+ }
+}
+
+/**
+ Setup a controller that to be used in runtime service.
+
+ @Bus: Bus ID.
+ @return: 0 for success.
+ Otherwise, error code.
+ **/
+EFI_STATUS
+EFIAPI
+GpioSetupRuntime (
+ IN UINT32 Pin
+ )
+{
+ EFI_STATUS Status;
+ EFI_GCD_MEMORY_SPACE_DESCRIPTOR Descriptor;
+
+ if (GetBaseAddr (Pin) == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (mVirtualAddressChangeEvent == NULL) {
+ /*
+ * Register for the virtual address change event
+ */
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ GpioVirtualAddressChangeEvent,
+ NULL,
+ &gEfiEventVirtualAddressChangeGuid,
+ &mVirtualAddressChangeEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+ }
+
+ Status = gDS->GetMemorySpaceDescriptor (
+ GetBaseAddr (Pin) & RUNTIME_ADDRESS_MASK,
+ &Descriptor
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gDS->SetMemorySpaceAttributes (
+ GetBaseAddr (Pin) & RUNTIME_ADDRESS_MASK,
+ RUNTIME_ADDRESS_LENGTH,
+ Descriptor.Attributes | EFI_MEMORY_RUNTIME
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ GpioRuntimeEnableArray[Pin / GPIO_DWAPB_PINS_PER_CONTROLLER] = TRUE;
+
+ return Status;
+}
--
2.17.1
next prev parent reply other threads:[~2021-05-26 10:11 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-26 10:06 [edk2-platforms][PATCH v2 00/32] Add new Ampere Mt. Jade platform Nhi Pham
2021-05-26 10:06 ` [edk2-platforms][PATCH v2 01/32] Ampere: Initial support for Ampere Altra processor and " Nhi Pham
2021-06-04 23:04 ` Leif Lindholm
2021-06-09 4:50 ` Nhi Pham
2021-06-09 12:40 ` Leif Lindholm
2021-06-15 16:46 ` Nhi Pham
2021-05-26 10:06 ` [PATCH 1/1] UsbCdcNetDxe: Remove reading connection status in SNP GetStatus Nhi Pham
2021-05-26 10:23 ` [edk2-devel] " Nhi Pham
2021-05-26 10:06 ` [edk2-platforms][PATCH v2 02/32] AmpereAltraPkg: Add MmCommunication modules Nhi Pham
2021-06-04 23:05 ` Leif Lindholm
2021-05-26 10:06 ` [edk2-platforms][PATCH v2 03/32] AmperePlatformPkg: Implement FailSafe library Nhi Pham
2021-06-04 23:07 ` Leif Lindholm
2021-05-26 10:06 ` [edk2-platforms][PATCH v2 04/32] AmperePlatformPkg: Add FailSafe and WDT support Nhi Pham
2021-06-04 23:12 ` Leif Lindholm
2021-06-15 16:47 ` Nhi Pham
2021-05-26 10:06 ` [edk2-platforms][PATCH v2 05/32] AmpereAltraPkg: Add DwI2cLib library Nhi Pham
2021-06-04 23:21 ` Leif Lindholm
2021-06-15 16:47 ` Nhi Pham
2021-05-26 10:06 ` Nhi Pham [this message]
2021-06-04 23:22 ` [edk2-platforms][PATCH v2 06/32] AmpereAltraPkg: Add DwGpioLib library Leif Lindholm
2021-05-26 10:06 ` [edk2-platforms][PATCH v2 07/32] JadePkg: Implement RealTimeClockLib for PCF85063 Nhi Pham
2021-06-04 23:26 ` Leif Lindholm
2021-06-15 16:48 ` Nhi Pham
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 08/32] AmpereAltraPkg: Add BootProgress support Nhi Pham
2021-06-04 23:27 ` Leif Lindholm
2021-06-15 16:48 ` Nhi Pham
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 09/32] AmpereAltraPkg: Support non-volatile variables Nhi Pham
2021-06-04 23:36 ` Leif Lindholm
2021-06-15 16:48 ` Nhi Pham
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 10/32] AmpereSiliconPkg: Add PlatformManagerUiLib library instance Nhi Pham
2021-06-04 23:37 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 11/32] AmperePlatformPkg: Add AcpiPccLib to support ACPI PCCT Table Nhi Pham
2021-06-04 23:44 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 12/32] AmperePlatformPkg: Add AcpiHelperLib to update ACPI DSDT table Nhi Pham
2021-06-04 23:47 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 13/32] AmpereAltraPkg, JadePkg: Add ACPI support Nhi Pham
2021-06-04 23:50 ` Leif Lindholm
2021-06-15 16:49 ` Nhi Pham
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 14/32] AmpereAltraPkg: Add PcieCoreLib library instance Nhi Pham
2021-06-05 0:05 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 15/32] JadePkg: Add PcieBoardLib " Nhi Pham
2021-06-07 22:45 ` Leif Lindholm
2021-06-15 16:50 ` Nhi Pham
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 16/32] AmpereAltraPkg: Add PciHostBridge driver Nhi Pham
2021-06-08 22:26 ` Leif Lindholm
2021-06-09 5:29 ` Ard Biesheuvel
2021-06-15 15:54 ` Nhi Pham
2021-06-16 14:20 ` Ard Biesheuvel
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 17/32] JadePkg: Enable PCIe-related libraries and device drivers Nhi Pham
2021-06-07 22:51 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 18/32] JadePkg: Add ASpeed GOP driver Nhi Pham
2021-06-07 22:51 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 19/32] AmpereAltraPkg: Add Random Number Generator Support Nhi Pham
2021-06-08 11:13 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 20/32] JadePkg: Add SMBIOS tables support Nhi Pham
2021-06-07 23:00 ` Leif Lindholm
2021-06-15 16:51 ` Nhi Pham
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 21/32] AmpereAltraPkg: Add DebugInfoPei module Nhi Pham
2021-06-07 23:08 ` Leif Lindholm
2021-06-15 16:51 ` Nhi Pham
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 22/32] AmpereAltraPkg: Add platform info screen Nhi Pham
2021-06-07 23:10 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 23/32] AmpereAltraPkg: Add configuration screen for memory Nhi Pham
2021-06-07 23:14 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 24/32] AmpereAltraPkg: Add configuration screen for CPU Nhi Pham
2021-06-07 23:15 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 25/32] AmpereAltraPkg: Add configuration screen for ACPI Nhi Pham
2021-06-07 23:20 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 26/32] AmpereAltraPkg: Add configuration screen for RAS Nhi Pham
2021-06-07 23:22 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 27/32] AmpereAltraPkg: Add configuration screen for Watchdog timer Nhi Pham
2021-06-07 23:24 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 28/32] AmpereAltraPkg: Add configuration screen for Pcie Devices Nhi Pham
2021-06-07 23:34 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 29/32] JadePkg: Recover boot options when NVRAM cleared Nhi Pham
2021-06-07 23:46 ` Leif Lindholm
2021-06-15 16:52 ` Nhi Pham
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 30/32] AmpereSiliconPkg: Implement PlatformBootManagerLib for LinuxBoot Nhi Pham
2021-06-07 23:50 ` Leif Lindholm
2021-06-09 15:21 ` Nhi Pham
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 31/32] Platform/Ampere: Introduce the LinuxBootPkg Nhi Pham
2021-06-07 23:51 ` Leif Lindholm
2021-05-26 10:07 ` [edk2-platforms][PATCH v2 32/32] AmpereAltraPkg,JadePkg: Support LinuxBoot DSC/FDF build for Jade platform Nhi Pham
2021-06-07 23:58 ` Leif Lindholm
2021-06-09 15:20 ` Nhi Pham
2021-05-27 12:56 ` [edk2-platforms][PATCH v2 00/32] Add new Ampere Mt. " Leif Lindholm
2021-06-04 13:54 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210526100724.5359-8-nhi@os.amperecomputing.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox