From: "Sunny Wang" <Sunny.Wang@arm.com>
To: devel@edk2.groups.io
Cc: "Sunny Wang" <Sunny.Wang@arm.com>,
"Samer El-Haj-Mahmoud" <samer.el-haj-mahmoud@arm.com>,
"Sami Mujawar" <sami.mujawar@arm.com>,
"Jeremy Linton" <jeremy.linton@arm.com>,
"Pete Batard" <pete@akeo.ie>,
"Ard Biesheuvel" <ardb+tianocore@kernel.org>,
"Mario Bălănică" <mariobalanica02@gmail.com>,
"Sunny Wang" <sunny.wang@arm.com>
Subject: [PATCH v4 1/3] Platform/RaspberryPi: Dynamically build UARTs info in ACPI
Date: Mon, 7 Jun 2021 15:53:37 +0800 [thread overview]
Message-ID: <20210607075339.342-2-Sunny.Wang@arm.com> (raw)
In-Reply-To: <20210607075339.342-1-Sunny.Wang@arm.com>
Changes:
1. Add code to ConfigDxe driver and AcpiTables module to dynamically
build either Mini UART or PL011 UART info in ACPI. This also fixes
the issue discussed in https://github.com/pftf/RPi4/issues/118.
2. Cleanup by moving duplicate Debug Port 2 table related defines and
structures to a newly created header file (RpiDebugPort2Table.h).
Testing Done:
- Booted to UEFI shell and use acpiview command to check the result of
the different UART settings in config.txt (enabling either Mini UART
or PL011) and SPCR, DBG2 tables and device BTH0 are dynamically
changed as expected.
Cc: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Pete Batard <pete@akeo.ie>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Mario Bălănică <mariobalanica02@gmail.com>
Signed-off-by: Sunny Wang <sunny.wang@arm.com>
---
.../RaspberryPi/AcpiTables/AcpiTables.inf | 8 +-
.../RaspberryPi/AcpiTables/Dbg2MiniUart.aslc | 81 +++++++++
.../AcpiTables/{Dbg2.aslc => Dbg2Pl011.aslc} | 30 +---
.../RaspberryPi/AcpiTables/SpcrMiniUart.aslc | 91 ++++++++++
.../AcpiTables/{Spcr.aslc => SpcrPl011.aslc} | 10 +-
Platform/RaspberryPi/AcpiTables/Uart.asl | 155 +++++++++++++-----
.../RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 48 +++++-
.../Drivers/ConfigDxe/ConfigDxe.inf | 1 +
.../IndustryStandard/RpiDebugPort2Table.h | 33 ++++
Platform/RaspberryPi/Include/UartSelection.h | 20 +++
Platform/RaspberryPi/RPi3/RPi3.dsc | 8 +
Platform/RaspberryPi/RPi4/RPi4.dsc | 8 +
Platform/RaspberryPi/RaspberryPi.dec | 1 +
13 files changed, 410 insertions(+), 84 deletions(-)
create mode 100644 Platform/RaspberryPi/AcpiTables/Dbg2MiniUart.aslc
rename Platform/RaspberryPi/AcpiTables/{Dbg2.aslc => Dbg2Pl011.aslc} (72%)
create mode 100644 Platform/RaspberryPi/AcpiTables/SpcrMiniUart.aslc
rename Platform/RaspberryPi/AcpiTables/{Spcr.aslc => SpcrPl011.aslc} (87%)
create mode 100644 Platform/RaspberryPi/Include/IndustryStandard/RpiDebugPort2Table.h
create mode 100644 Platform/RaspberryPi/Include/UartSelection.h
diff --git a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
index d3363a76a1..1ddc9ca5fe 100644
--- a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
+++ b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
@@ -2,7 +2,7 @@
#
# ACPI table data and ASL sources required to boot the platform.
#
-# Copyright (c) 2019, ARM Limited. All rights reserved.
+# Copyright (c) 2019-2021, ARM Limited. All rights reserved.
# Copyright (c) 2017, Andrey Warkentin <andrey.warkentin@gmail.com>
# Copyright (c) Microsoft Corporation. All rights reserved.
#
@@ -28,12 +28,14 @@
Emmc.asl
Madt.aslc
Fadt.aslc
- Dbg2.aslc
+ Dbg2MiniUart.aslc
+ Dbg2Pl011.aslc
Gtdt.aslc
Iort.aslc
Dsdt.asl
Csrt.aslc
- Spcr.aslc
+ SpcrMiniUart.aslc
+ SpcrPl011.aslc
Pptt.aslc
SsdtThermal.asl
diff --git a/Platform/RaspberryPi/AcpiTables/Dbg2MiniUart.aslc b/Platform/RaspberryPi/AcpiTables/Dbg2MiniUart.aslc
new file mode 100644
index 0000000000..be7d96c179
--- /dev/null
+++ b/Platform/RaspberryPi/AcpiTables/Dbg2MiniUart.aslc
@@ -0,0 +1,81 @@
+/** @file
+ *
+ * Debug Port Table (DBG2)
+ *
+ * Copyright (c) 2019, Pete Batard <pete@akeo.ie>
+ * Copyright (c) 2012-2021, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-2-Clause-Patent
+ *
+ **/
+
+#include <IndustryStandard/Acpi.h>
+#include <IndustryStandard/Bcm2836.h>
+#include <IndustryStandard/RpiDebugPort2Table.h>
+#include <Library/AcpiLib.h>
+#include <Library/PcdLib.h>
+
+#include "AcpiTables.h"
+
+#pragma pack(1)
+
+#define RPI_UART_INTERFACE_TYPE EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART
+#define RPI_UART_BASE_ADDRESS BCM2836_MINI_UART_BASE_ADDRESS
+#define RPI_UART_LENGTH BCM2836_MINI_UART_LENGTH
+//
+// RPI_UART_STR should match the value used Uart.asl
+//
+#define RPI_UART_STR { '\\', '_', 'S', 'B', '.', 'G', 'D', 'V', '0', '.', 'U', 'R', 'T', 'M', 0x00 }
+
+#define DBG2_DEBUG_PORT_DDI(NumReg, SubType, UartBase, UartAddrLen, UartNameStr) { \
+ { \
+ EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION, /* UINT8 Revision */ \
+ sizeof (DBG2_DEBUG_DEVICE_INFORMATION), /* UINT16 Length */ \
+ NumReg, /* UINT8 NumberofGenericAddressRegisters */ \
+ RPI_DBG2_NAMESPACESTRING_FIELD_SIZE, /* UINT16 NameSpaceStringLength */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, NameSpaceString), /* UINT16 NameSpaceStringOffset */ \
+ 0, /* UINT16 OemDataLength */ \
+ 0, /* UINT16 OemDataOffset */ \
+ EFI_ACPI_DBG2_PORT_TYPE_SERIAL, /* UINT16 Port Type */ \
+ SubType, /* UINT16 Port Subtype */ \
+ {EFI_ACPI_RESERVED_BYTE, EFI_ACPI_RESERVED_BYTE}, /* UINT8 Reserved[2] */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, BaseAddressRegister), /* UINT16 BaseAddressRegister Offset */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, AddressSize) /* UINT16 AddressSize Offset */ \
+ }, \
+ ARM_GAS32 (UartBase), /* EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister */ \
+ UartAddrLen, /* UINT32 AddressSize */ \
+ UartNameStr /* UINT8 NameSpaceString[MAX_DBG2_NAME_LEN] */ \
+ }
+
+
+STATIC DBG2_TABLE Dbg2 = {
+ {
+ ACPI_HEADER (
+ EFI_ACPI_6_3_DEBUG_PORT_2_TABLE_SIGNATURE,
+ DBG2_TABLE,
+ EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION
+ ),
+ OFFSET_OF (DBG2_TABLE, Dbg2DeviceInfo),
+ RPI_DBG2_NUM_DEBUG_PORTS /* UINT32 NumberDbgDeviceInfo */
+ },
+ {
+ /*
+ * Kernel Debug Port
+ */
+ DBG2_DEBUG_PORT_DDI (
+ RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS,
+ RPI_UART_INTERFACE_TYPE,
+ RPI_UART_BASE_ADDRESS,
+ RPI_UART_LENGTH,
+ RPI_UART_STR
+ ),
+ }
+};
+
+#pragma pack()
+
+//
+// Reference the table being generated to prevent the optimizer from removing
+// the data structure from the executable
+//
+VOID* CONST ReferenceAcpiTable = &Dbg2;
diff --git a/Platform/RaspberryPi/AcpiTables/Dbg2.aslc b/Platform/RaspberryPi/AcpiTables/Dbg2Pl011.aslc
similarity index 72%
rename from Platform/RaspberryPi/AcpiTables/Dbg2.aslc
rename to Platform/RaspberryPi/AcpiTables/Dbg2Pl011.aslc
index e3f2adae7e..e07869b027 100644
--- a/Platform/RaspberryPi/AcpiTables/Dbg2.aslc
+++ b/Platform/RaspberryPi/AcpiTables/Dbg2Pl011.aslc
@@ -3,7 +3,7 @@
* Debug Port Table (DBG2)
*
* Copyright (c) 2019, Pete Batard <pete@akeo.ie>
- * Copyright (c) 2012-2020, ARM Limited. All rights reserved.
+ * Copyright (c) 2012-2021, ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
@@ -11,7 +11,7 @@
#include <IndustryStandard/Acpi.h>
#include <IndustryStandard/Bcm2836.h>
-#include <IndustryStandard/DebugPort2Table.h>
+#include <IndustryStandard/RpiDebugPort2Table.h>
#include <Library/AcpiLib.h>
#include <Library/PcdLib.h>
@@ -19,37 +19,13 @@
#pragma pack(1)
-#define RPI_DBG2_NUM_DEBUG_PORTS 1
-#define RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS 1
-#define RPI_DBG2_NAMESPACESTRING_FIELD_SIZE 15
-
-#if (RPI_MODEL == 4)
#define RPI_UART_INTERFACE_TYPE EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_PL011_UART
#define RPI_UART_BASE_ADDRESS BCM2836_PL011_UART_BASE_ADDRESS
#define RPI_UART_LENGTH BCM2836_PL011_UART_LENGTH
-#define RPI_UART_STR { '\\', '_', 'S', 'B', '.', 'G', 'D', 'V', '0', '.', 'U', 'R', 'T', '0', 0x00 }
-#else
-#define RPI_UART_INTERFACE_TYPE EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART
-#define RPI_UART_BASE_ADDRESS BCM2836_MINI_UART_BASE_ADDRESS
-#define RPI_UART_LENGTH BCM2836_MINI_UART_LENGTH
//
// RPI_UART_STR should match the value used Uart.asl
//
-#define RPI_UART_STR { '\\', '_', 'S', 'B', '.', 'G', 'D', 'V', '0', '.', 'U', 'R', 'T', 'M', 0x00 }
-#endif
-
-typedef struct {
- EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT Dbg2Device;
- EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister;
- UINT32 AddressSize;
- UINT8 NameSpaceString[RPI_DBG2_NAMESPACESTRING_FIELD_SIZE];
-} DBG2_DEBUG_DEVICE_INFORMATION;
-
-typedef struct {
- EFI_ACPI_DEBUG_PORT_2_DESCRIPTION_TABLE Description;
- DBG2_DEBUG_DEVICE_INFORMATION Dbg2DeviceInfo[RPI_DBG2_NUM_DEBUG_PORTS];
-} DBG2_TABLE;
-
+#define RPI_UART_STR { '\\', '_', 'S', 'B', '.', 'G', 'D', 'V', '0', '.', 'U', 'R', 'T', '0', 0x00 }
#define DBG2_DEBUG_PORT_DDI(NumReg, SubType, UartBase, UartAddrLen, UartNameStr) { \
{ \
diff --git a/Platform/RaspberryPi/AcpiTables/SpcrMiniUart.aslc b/Platform/RaspberryPi/AcpiTables/SpcrMiniUart.aslc
new file mode 100644
index 0000000000..2f638c61a5
--- /dev/null
+++ b/Platform/RaspberryPi/AcpiTables/SpcrMiniUart.aslc
@@ -0,0 +1,91 @@
+/** @file
+* SPCR Table
+*
+* Copyright (c) 2019 Pete Batard <pete@akeo.ie>
+* Copyright (c) 2014-2021, ARM Limited. All rights reserved.
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+*
+**/
+
+#include <IndustryStandard/Acpi.h>
+#include <IndustryStandard/Bcm2836.h>
+#include <IndustryStandard/SerialPortConsoleRedirectionTable.h>
+#include <Library/AcpiLib.h>
+#include <Library/PcdLib.h>
+
+#include "AcpiTables.h"
+
+#define RPI_UART_FLOW_CONTROL_NONE 0
+
+#define RPI_UART_INTERFACE_TYPE EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_BCM2835_UART
+#define RPI_UART_BASE_ADDRESS BCM2836_MINI_UART_BASE_ADDRESS
+#define RPI_UART_INTERRUPT BCM2836_MINI_UART_INTERRUPT
+
+STATIC EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE Spcr = {
+ ACPI_HEADER (
+ EFI_ACPI_6_3_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE,
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE,
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_REVISION
+ ),
+ // UINT8 InterfaceType;
+ RPI_UART_INTERFACE_TYPE,
+ // UINT8 Reserved1[3];
+ {
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE
+ },
+ // EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddress;
+ ARM_GAS32 (RPI_UART_BASE_ADDRESS),
+ // UINT8 InterruptType;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERRUPT_TYPE_GIC,
+ // UINT8 Irq;
+ 0, // Not used on ARM
+ // UINT32 GlobalSystemInterrupt;
+ RPI_UART_INTERRUPT,
+ // UINT8 BaudRate;
+#if (FixedPcdGet64 (PcdUartDefaultBaudRate) == 9600)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_9600,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 19200)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_19200,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 57600)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_57600,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 115200)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_115200,
+#else
+#error Unsupported SPCR Baud Rate
+#endif
+ // UINT8 Parity;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_PARITY_NO_PARITY,
+ // UINT8 StopBits;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_STOP_BITS_1,
+ // UINT8 FlowControl;
+ RPI_UART_FLOW_CONTROL_NONE,
+ // UINT8 TerminalType;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_TERMINAL_TYPE_VT_UTF8,
+ // UINT8 Reserved2;
+ EFI_ACPI_RESERVED_BYTE,
+ // UINT16 PciDeviceId;
+ 0xFFFF,
+ // UINT16 PciVendorId;
+ 0xFFFF,
+ // UINT8 PciBusNumber;
+ 0x00,
+ // UINT8 PciDeviceNumber;
+ 0x00,
+ // UINT8 PciFunctionNumber;
+ 0x00,
+ // UINT32 PciFlags;
+ 0x00000000,
+ // UINT8 PciSegment;
+ 0x00,
+ // UINT32 Reserved3;
+ EFI_ACPI_RESERVED_DWORD
+};
+
+//
+// Reference the table being generated to prevent the optimizer from removing the
+// data structure from the executable
+//
+VOID* CONST ReferenceAcpiTable = &Spcr;
diff --git a/Platform/RaspberryPi/AcpiTables/Spcr.aslc b/Platform/RaspberryPi/AcpiTables/SpcrPl011.aslc
similarity index 87%
rename from Platform/RaspberryPi/AcpiTables/Spcr.aslc
rename to Platform/RaspberryPi/AcpiTables/SpcrPl011.aslc
index 07df3a718d..06e19c1245 100644
--- a/Platform/RaspberryPi/AcpiTables/Spcr.aslc
+++ b/Platform/RaspberryPi/AcpiTables/SpcrPl011.aslc
@@ -2,7 +2,7 @@
* SPCR Table
*
* Copyright (c) 2019 Pete Batard <pete@akeo.ie>
-* Copyright (c) 2014-2016, ARM Limited. All rights reserved.
+* Copyright (c) 2014-2021, ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
@@ -18,16 +18,10 @@
#define RPI_UART_FLOW_CONTROL_NONE 0
-// Prefer PL011 serial output on the Raspberry Pi 4
-#if (RPI_MODEL == 4)
#define RPI_UART_INTERFACE_TYPE EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_ARM_PL011_UART
#define RPI_UART_BASE_ADDRESS BCM2836_PL011_UART_BASE_ADDRESS
#define RPI_UART_INTERRUPT BCM2836_PL011_UART_INTERRUPT
-#else
-#define RPI_UART_INTERFACE_TYPE EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_BCM2835_UART
-#define RPI_UART_BASE_ADDRESS BCM2836_MINI_UART_BASE_ADDRESS
-#define RPI_UART_INTERRUPT BCM2836_MINI_UART_INTERRUPT
-#endif
+
STATIC EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE Spcr = {
ACPI_HEADER (
EFI_ACPI_6_3_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE,
diff --git a/Platform/RaspberryPi/AcpiTables/Uart.asl b/Platform/RaspberryPi/AcpiTables/Uart.asl
index 81ae6711af..bac9d791eb 100644
--- a/Platform/RaspberryPi/AcpiTables/Uart.asl
+++ b/Platform/RaspberryPi/AcpiTables/Uart.asl
@@ -2,6 +2,7 @@
*
* [DSDT] Serial devices (UART).
*
+ * Copyright (c) 2021, ARM Limited. All rights reserved.
* Copyright (c) 2020, Pete Batard <pete@akeo.ie>
* Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
* Copyright (c) Microsoft Corporation. All rights reserved.
@@ -93,57 +94,125 @@ Device(BTH0)
{
Name (_HID, "BCM2EA6")
Name (_CID, "BCM2EA6")
+
+ //
+ // UART In Use will be dynamically updated during boot
+ // 0x55 0x52 0x49 0x55 0xA 0x2 (Value must > 1)
+ //
+ Name (URIU, 0x2)
+
Method (_STA)
{
Return (0xf)
}
+
+ //
+ // Resource for URT0 (PL011)
+ //
+ Name (BTPL, ResourceTemplate ()
+ {
+ UARTSerialBus(
+ 115200, // InitialBaudRate: in BPS
+ , // BitsPerByte: default to 8 bits
+ , // StopBits: Defaults to one bit
+ 0x00, // LinesInUse: 8 1-bit flags to
+ // declare enabled control lines.
+ // Raspberry Pi does not exposed
+ // HW control signals -> not supported.
+ // Optional bits:
+ // - Bit 7 (0x80) Request To Send (RTS)
+ // - Bit 6 (0x40) Clear To Send (CTS)
+ // - Bit 5 (0x20) Data Terminal Ready (DTR)
+ // - Bit 4 (0x10) Data Set Ready (DSR)
+ // - Bit 3 (0x08) Ring Indicator (RI)
+ // - Bit 2 (0x04) Data Carrier Detect (DTD)
+ // - Bit 1 (0x02) Reserved. Must be 0.
+ // - Bit 0 (0x01) Reserved. Must be 0.
+ , // IsBigEndian:
+ // default to LittleEndian.
+ , // Parity: Defaults to no parity
+ , // FlowControl: Defaults to
+ // no flow control.
+ 16, // ReceiveBufferSize
+ 16, // TransmitBufferSize
+ "\\_SB.GDV0.URT0", // ResourceSource:
+ // UART bus controller name
+ , // ResourceSourceIndex: assumed to be 0
+ , // ResourceUsage: assumed to be
+ // ResourceConsumer
+ UAR0, // DescriptorName: creates name
+ // for offset of resource descriptor
+ ) // Vendor data
+ //
+ // RPIQ connection for BT_ON/OFF
+ //
+ GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GDV0.RPIQ", 0, ResourceConsumer, , ) { 128 }
+ })
+
+ //
+ // Resource for URTM (miniUART)
+ //
+ Name (BTMN, ResourceTemplate ()
+ {
+ //
+ // BT UART: ResourceSource will be dynamically updated to
+ // either URT0 (PL011) or URTM (miniUART) during boot
+ //
+ UARTSerialBus(
+ 115200, // InitialBaudRate: in BPS
+ , // BitsPerByte: default to 8 bits
+ , // StopBits: Defaults to one bit
+ 0x00, // LinesInUse: 8 1-bit flags to
+ // declare enabled control lines.
+ // Raspberry Pi does not exposed
+ // HW control signals -> not supported.
+ // Optional bits:
+ // - Bit 7 (0x80) Request To Send (RTS)
+ // - Bit 6 (0x40) Clear To Send (CTS)
+ // - Bit 5 (0x20) Data Terminal Ready (DTR)
+ // - Bit 4 (0x10) Data Set Ready (DSR)
+ // - Bit 3 (0x08) Ring Indicator (RI)
+ // - Bit 2 (0x04) Data Carrier Detect (DTD)
+ // - Bit 1 (0x02) Reserved. Must be 0.
+ // - Bit 0 (0x01) Reserved. Must be 0.
+ , // IsBigEndian:
+ // default to LittleEndian.
+ , // Parity: Defaults to no parity
+ , // FlowControl: Defaults to
+ // no flow control.
+ 16, // ReceiveBufferSize
+ 16, // TransmitBufferSize
+ "\\_SB.GDV0.URTM", // ResourceSource:
+ // UART bus controller name
+ , // ResourceSourceIndex: assumed to be 0
+ , // ResourceUsage: assumed to be
+ // ResourceConsumer
+ UARM, // DescriptorName: creates name
+ // for offset of resource descriptor
+ ) // Vendor data
+ //
+ // RPIQ connection for BT_ON/OFF
+ //
+ GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GDV0.RPIQ", 0, ResourceConsumer, , ) { 128 }
+ })
+
Method (_CRS, 0x0, Serialized)
{
- Name (RBUF, ResourceTemplate ()
+ if (URIU == 0)
{
- // BT UART: URT0 (PL011) or URTM (miniUART)
- UARTSerialBus(
- 115200, // InitialBaudRate: in BPS
- , // BitsPerByte: default to 8 bits
- , // StopBits: Defaults to one bit
- 0x00, // LinesInUse: 8 1-bit flags to
- // declare enabled control lines.
- // Raspberry Pi does not exposed
- // HW control signals -> not supported.
- // Optional bits:
- // - Bit 7 (0x80) Request To Send (RTS)
- // - Bit 6 (0x40) Clear To Send (CTS)
- // - Bit 5 (0x20) Data Terminal Ready (DTR)
- // - Bit 4 (0x10) Data Set Ready (DSR)
- // - Bit 3 (0x08) Ring Indicator (RI)
- // - Bit 2 (0x04) Data Carrier Detect (DTD)
- // - Bit 1 (0x02) Reserved. Must be 0.
- // - Bit 0 (0x01) Reserved. Must be 0.
- , // IsBigEndian:
- // default to LittleEndian.
- , // Parity: Defaults to no parity
- , // FlowControl: Defaults to
- // no flow control.
- 16, // ReceiveBufferSize
- 16, // TransmitBufferSize
-#if (RPI_MODEL == 4)
- "\\_SB.GDV0.URTM", // ResourceSource:
-#else
- "\\_SB.GDV0.URT0", // ResourceSource:
-#endif
- // UART bus controller name
- , // ResourceSourceIndex: assumed to be 0
- , // ResourceUsage: assumed to be
- // ResourceConsumer
- UAR0, // DescriptorName: creates name
- // for offset of resource descriptor
- ) // Vendor data
-
//
- // RPIQ connection for BT_ON/OFF
+ // PL011 UART is configured for console output
+ // Return Mini UART for Bluetooth
//
- GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GDV0.RPIQ", 0, ResourceConsumer, , ) { 128 }
- })
- Return (RBUF)
+ return (^BTMN)
+ }
+ else
+ {
+ //
+ // Mini UART is configured for console output
+ // Return PL011 UART for Bluetooth
+ //
+ return (^BTPL)
+ }
}
}
diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
index d3c5869949..d6efb59793 100644
--- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
+++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
@@ -12,6 +12,10 @@
#include <IndustryStandard/Bcm2836.h>
#include <IndustryStandard/Bcm2836Gpio.h>
#include <IndustryStandard/RpiMbox.h>
+#include <IndustryStandard/SerialPortConsoleRedirectionTable.h>
+#include <IndustryStandard/RpiDebugPort2Table.h>
+#include <UartSelection.h>
+
#include <Library/AcpiLib.h>
#include <Library/DebugLib.h>
#include <Library/DevicePathLib.h>
@@ -23,6 +27,7 @@
#include <Library/NetLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiRuntimeServicesTableLib.h>
+#include <Library/PcdLib.h>
#include <Protocol/AcpiTable.h>
#include <Protocol/BcmGenetPlatformDevice.h>
#include <Protocol/RpiFirmware.h>
@@ -743,6 +748,11 @@ STATIC CONST AML_NAME_OP_REPLACE SsdtEmmcNameOpReplace[] = {
{ }
};
+STATIC CONST AML_NAME_OP_REPLACE DsdtNameOpReplace[] = {
+ { "URIU", PcdToken (PcdUartInUse) },
+ { }
+};
+
STATIC CONST NAMESPACE_TABLES SdtTables[] = {
{
SIGNATURE_64 ('R', 'P', 'I', 'T', 'H', 'F', 'A', 'N'),
@@ -756,11 +766,11 @@ STATIC CONST NAMESPACE_TABLES SdtTables[] = {
PcdToken(PcdSdIsArasan),
SsdtEmmcNameOpReplace
},
- {
+ { // DSDT
SIGNATURE_64 ('R', 'P', 'I', 0, 0, 0, 0, 0),
0,
0,
- NULL
+ DsdtNameOpReplace
},
{ }
};
@@ -779,6 +789,9 @@ HandleDynamicNamespace (
{
UINTN Tables;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE *SpcrTable;
+ DBG2_TABLE *Dbg2Table;
+
switch (AcpiHeader->Signature) {
case SIGNATURE_32 ('D', 'S', 'D', 'T'):
case SIGNATURE_32 ('S', 'S', 'D', 'T'):
@@ -788,14 +801,37 @@ HandleDynamicNamespace (
}
}
DEBUG ((DEBUG_ERROR, "Found namespace table not in table list.\n"));
-
return FALSE;
+
case SIGNATURE_32 ('I', 'O', 'R', 'T'):
// only enable the IORT on machines with >3G and no limit
// to avoid problems with rhel/centos and other older OSs
if (PcdGet32 (PcdRamLimitTo3GB) || !PcdGet32 (PcdRamMoreThan3GB)) {
return FALSE;
}
+ return TRUE;
+
+ case SIGNATURE_32 ('S', 'P', 'C', 'R'):
+ SpcrTable = (EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE *)AcpiHeader;
+ if ((PcdGet32 (PcdUartInUse) == PL011_UART_IN_USE) &&
+ (SpcrTable->InterfaceType == EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_ARM_PL011_UART)) {
+ return TRUE;
+ } else if ((PcdGet32 (PcdUartInUse) == MINI_UART_IN_USE) &&
+ (SpcrTable->InterfaceType == EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_BCM2835_UART)) {
+ return TRUE;
+ }
+ return FALSE;
+
+ case SIGNATURE_32 ('D', 'B', 'G', '2'):
+ Dbg2Table = (DBG2_TABLE *)AcpiHeader;
+ if ((PcdGet32 (PcdUartInUse) == PL011_UART_IN_USE) &&
+ (Dbg2Table->Dbg2DeviceInfo[0].Dbg2Device.PortSubtype == EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_PL011_UART)) {
+ return TRUE;
+ } else if ((PcdGet32 (PcdUartInUse) == MINI_UART_IN_USE) &&
+ (Dbg2Table->Dbg2DeviceInfo[0].Dbg2Device.PortSubtype == EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART)) {
+ return TRUE;
+ }
+ return FALSE;
}
return TRUE;
@@ -812,6 +848,12 @@ ConfigInitialize (
EFI_STATUS Status;
EFI_EVENT EndOfDxeEvent;
+ if ((MmioRead32(GPIO_GPFSEL1) & GPFSEL1_UART_MASK) == PL011_UART_IN_USE_REG_VALUE) {
+ PcdSet32S (PcdUartInUse, PL011_UART_IN_USE);
+ } else if ((MmioRead32(GPIO_GPFSEL1) & GPFSEL1_UART_MASK) == MINI_UART_IN_USE_REG_VALUE) {
+ PcdSet32S (PcdUartInUse, MINI_UART_IN_USE);
+ }
+
Status = gBS->LocateProtocol (&gRaspberryPiFirmwareProtocolGuid,
NULL, (VOID**)&mFwProtocol);
ASSERT_EFI_ERROR (Status);
diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf
index 032e40b0c3..597e1b4205 100644
--- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf
+++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf
@@ -94,6 +94,7 @@
gRaspberryPiTokenSpaceGuid.PcdFanOnGpio
gRaspberryPiTokenSpaceGuid.PcdFanTemp
gRaspberryPiTokenSpaceGuid.PcdBootPolicy
+ gRaspberryPiTokenSpaceGuid.PcdUartInUse
[Depex]
gPcdProtocolGuid AND gRaspberryPiFirmwareProtocolGuid
diff --git a/Platform/RaspberryPi/Include/IndustryStandard/RpiDebugPort2Table.h b/Platform/RaspberryPi/Include/IndustryStandard/RpiDebugPort2Table.h
new file mode 100644
index 0000000000..73134dfdc2
--- /dev/null
+++ b/Platform/RaspberryPi/Include/IndustryStandard/RpiDebugPort2Table.h
@@ -0,0 +1,33 @@
+/** @file
+
+ Copyright (c) 2021, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ **/
+#ifndef __RPI_DEBUG_PORT_2_H__
+#define __RPI_DEBUG_PORT_2_H__
+
+#include <IndustryStandard/DebugPort2Table.h>
+
+#define RPI_DBG2_NUM_DEBUG_PORTS 1
+#define RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS 1
+#define RPI_DBG2_NAMESPACESTRING_FIELD_SIZE 15
+
+#pragma pack(1)
+
+
+typedef struct {
+ EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT Dbg2Device;
+ EFI_ACPI_6_3_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister;
+ UINT32 AddressSize;
+ UINT8 NameSpaceString[RPI_DBG2_NAMESPACESTRING_FIELD_SIZE];
+} DBG2_DEBUG_DEVICE_INFORMATION;
+
+typedef struct {
+ EFI_ACPI_DEBUG_PORT_2_DESCRIPTION_TABLE Description;
+ DBG2_DEBUG_DEVICE_INFORMATION Dbg2DeviceInfo[RPI_DBG2_NUM_DEBUG_PORTS];
+} DBG2_TABLE;
+
+#pragma pack()
+#endif //__RPI_DEBUG_PORT_2_H__
diff --git a/Platform/RaspberryPi/Include/UartSelection.h b/Platform/RaspberryPi/Include/UartSelection.h
new file mode 100644
index 0000000000..803bf860bb
--- /dev/null
+++ b/Platform/RaspberryPi/Include/UartSelection.h
@@ -0,0 +1,20 @@
+/** @file
+ *
+ * Copyright (c) 2021, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-2-Clause-Patent
+ *
+ **/
+
+#ifndef UART_SELECTION_H
+#define UART_SELECTION_H
+
+#define GPFSEL1_UART_MASK (BIT17 | BIT16 | BIT15 | BIT14 | BIT13 | BIT12)
+
+#define PL011_UART_IN_USE_REG_VALUE (BIT17 | BIT14) // ALT0 - 0x24000
+#define MINI_UART_IN_USE_REG_VALUE (BIT16 | BIT13) // ALT5 - 0x12000
+
+#define PL011_UART_IN_USE 0
+#define MINI_UART_IN_USE 1
+
+#endif /* UART_SELECTION_H */
diff --git a/Platform/RaspberryPi/RPi3/RPi3.dsc b/Platform/RaspberryPi/RPi3/RPi3.dsc
index 425c7ff9ec..53825bcf62 100644
--- a/Platform/RaspberryPi/RPi3/RPi3.dsc
+++ b/Platform/RaspberryPi/RPi3/RPi3.dsc
@@ -552,6 +552,14 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0
+ #
+ # UART in use
+ # This value will be synchronized with the setting in config.txt
+ # 0 - PL011_UART_IN_USE
+ # 1 - MINI_UART_IN_USE
+ #
+ gRaspberryPiTokenSpaceGuid.PcdUartInUse|1
+
################################################################################
#
# Components Section - list of all EDK II Modules needed by this Platform
diff --git a/Platform/RaspberryPi/RPi4/RPi4.dsc b/Platform/RaspberryPi/RPi4/RPi4.dsc
index d8c6fdd4bd..fd73c4d14b 100644
--- a/Platform/RaspberryPi/RPi4/RPi4.dsc
+++ b/Platform/RaspberryPi/RPi4/RPi4.dsc
@@ -568,6 +568,14 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0
+ #
+ # UART in use
+ # This value will be synchronized with the setting in config.txt
+ # 0 - PL011_UART_IN_USE
+ # 1 - MINI_UART_IN_USE
+ #
+ gRaspberryPiTokenSpaceGuid.PcdUartInUse|0
+
################################################################################
#
# Components Section - list of all EDK II Modules needed by this Platform
diff --git a/Platform/RaspberryPi/RaspberryPi.dec b/Platform/RaspberryPi/RaspberryPi.dec
index 8eb1c2bac7..f1dd8ac0ed 100644
--- a/Platform/RaspberryPi/RaspberryPi.dec
+++ b/Platform/RaspberryPi/RaspberryPi.dec
@@ -72,3 +72,4 @@
gRaspberryPiTokenSpaceGuid.PcdPlatformResetDelay|0|UINT32|0x0000001E
gRaspberryPiTokenSpaceGuid.PcdMmcEnableDma|0|UINT32|0x0000001F
gRaspberryPiTokenSpaceGuid.PcdBootPolicy|0|UINT32|0x00000020
+ gRaspberryPiTokenSpaceGuid.PcdUartInUse|1|UINT32|0x00000021
--
2.31.0.windows.1
next prev parent reply other threads:[~2021-06-07 7:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-07 7:53 [PATCH v4 0/3] Dynamically build UARTs info in ACPI Sunny Wang
2021-06-07 7:53 ` Sunny Wang [this message]
2021-06-12 13:39 ` [PATCH v4 1/3] Platform/RaspberryPi: " Pete Batard
2021-06-12 20:08 ` Ard Biesheuvel
2021-06-07 7:53 ` [PATCH v4 2/3] Silicon/Broadcom/Bcm283x: Clean up GpioPinSet function Sunny Wang
2021-06-12 13:40 ` Pete Batard
2021-06-07 7:53 ` [PATCH v4 3/3] Platform/RaspberryPi: Enable Bluetooth and UART in Windows OS Sunny Wang
2021-06-07 15:04 ` Mario Bălănică
2021-06-12 13:40 ` Pete Batard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210607075339.342-2-Sunny.Wang@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox