public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Gerd Hoffmann" <kraxel@redhat.com>
To: devel@edk2.groups.io
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [PATCH 2/2] OvmfPkg/VirtioMmioDeviceLib: Add virtio 1.0 support.
Date: Wed,  9 Jun 2021 07:06:01 +0200	[thread overview]
Message-ID: <20210609050601.2754389-3-kraxel@redhat.com> (raw)
In-Reply-To: <20210609050601.2754389-1-kraxel@redhat.com>

Add support for virtio 1.0 to the mmio transport.  virtio 0.9.5 uses
page size, page frame number and a fixed layout for the ring.  virtio
1.0 uses the physical addresses for base address, used bits and
available bits instead.

The ring layout is not changed, so a 0.9.5 compatible layout is used in
both 0.9.5 and 1.0 mode to to keep the code differences as small as
possible.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 .../VirtioMmioDeviceLib/VirtioMmioDevice.h    |  1 +
 .../VirtioMmioDeviceLib/VirtioMmioDevice.c    | 17 +++++++---
 .../VirtioMmioDeviceFunctions.c               | 31 +++++++++++++++++--
 3 files changed, 42 insertions(+), 7 deletions(-)

diff --git a/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.h b/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.h
index ab53b90d51c9..8b19996b716f 100644
--- a/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.h
+++ b/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.h
@@ -26,6 +26,7 @@
 
 typedef struct {
   UINT32                 Signature;
+  UINT32                 Version;
   VIRTIO_DEVICE_PROTOCOL VirtioDevice;
   PHYSICAL_ADDRESS       BaseAddress;
 } VIRTIO_MMIO_DEVICE;
diff --git a/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.c b/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.c
index 6dbbba008c75..a8f78a50861b 100644
--- a/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.c
+++ b/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.c
@@ -58,7 +58,6 @@ VirtioMmioInit (
   )
 {
   UINT32     MagicValue;
-  UINT32     Version;
 
   //
   // Initialize VirtIo Mmio Device
@@ -66,7 +65,6 @@ VirtioMmioInit (
   CopyMem (&Device->VirtioDevice, &mMmioDeviceProtocolTemplate,
         sizeof (VIRTIO_DEVICE_PROTOCOL));
   Device->BaseAddress = BaseAddress;
-  Device->VirtioDevice.Revision = VIRTIO_SPEC_REVISION (0, 9, 5);
   Device->VirtioDevice.SubSystemDeviceId =
           MmioRead32 (BaseAddress + VIRTIO_MMIO_OFFSET_DEVICE_ID);
 
@@ -78,8 +76,19 @@ VirtioMmioInit (
     return EFI_UNSUPPORTED;
   }
 
-  Version = VIRTIO_CFG_READ (Device, VIRTIO_MMIO_OFFSET_VERSION);
-  if (Version != 1) {
+  Device->Version = VIRTIO_CFG_READ (Device, VIRTIO_MMIO_OFFSET_VERSION);
+  switch (Device->Version) {
+  case 1:
+    DEBUG ((DEBUG_INFO, "%a virtio 0.9.5, id %d\n", __FUNCTION__,
+            Device->VirtioDevice.SubSystemDeviceId));
+    Device->VirtioDevice.Revision = VIRTIO_SPEC_REVISION (0, 9, 5);
+    break;
+  case 2:
+    DEBUG ((DEBUG_INFO, "%a virtio 1.0, id %d\n", __FUNCTION__,
+            Device->VirtioDevice.SubSystemDeviceId));
+    Device->VirtioDevice.Revision = VIRTIO_SPEC_REVISION (1, 0, 0);
+    break;
+  default:
     return EFI_UNSUPPORTED;
   }
 
diff --git a/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceFunctions.c b/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceFunctions.c
index b0d75fb1dd24..bf8523a6fb3b 100644
--- a/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceFunctions.c
+++ b/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceFunctions.c
@@ -151,7 +151,9 @@ VirtioMmioSetPageSize (
 
   Device = VIRTIO_MMIO_DEVICE_FROM_VIRTIO_DEVICE (This);
 
-  VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_GUEST_PAGE_SIZE, PageSize);
+  if (Device->Version == 1) {
+    VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_GUEST_PAGE_SIZE, PageSize);
+  }
 
   return EFI_SUCCESS;
 }
@@ -181,13 +183,36 @@ VirtioMmioSetQueueAddress (
   )
 {
   VIRTIO_MMIO_DEVICE *Device;
+  UINT64 Address;
 
   ASSERT (RingBaseShift == 0);
 
   Device = VIRTIO_MMIO_DEVICE_FROM_VIRTIO_DEVICE (This);
 
-  VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_QUEUE_PFN,
-    (UINT32)((UINTN)Ring->Base >> EFI_PAGE_SHIFT));
+  if (Device->Version == 1) {
+    VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_QUEUE_PFN,
+      (UINT32)((UINTN)Ring->Base >> EFI_PAGE_SHIFT));
+  } else {
+    Address = (UINT64)Ring->Base;
+    VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_QUEUE_DESC_LO,
+                      (UINT32)Address);
+    VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_QUEUE_DESC_HI,
+                      (UINT32)RShiftU64(Address, 32));
+
+    Address = (UINT64)Ring->Avail.Flags;
+    VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_QUEUE_AVAIL_LO,
+                      (UINT32)Address);
+    VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_QUEUE_AVAIL_HI,
+                      (UINT32)RShiftU64(Address, 32));
+
+    Address = (UINT64)Ring->Used.Flags;
+    VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_QUEUE_USED_LO,
+                      (UINT32)Address);
+    VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_QUEUE_USED_HI,
+                      (UINT32)RShiftU64(Address, 32));
+
+    VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_QUEUE_READY, 1);
+  }
 
   return EFI_SUCCESS;
 }
-- 
2.31.1


  parent reply	other threads:[~2021-06-09  5:06 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-09  5:05 [PATCH 0/2] Quo vadis virtio-mmio? Gerd Hoffmann
2021-06-09  5:06 ` [PATCH 1/2] OvmfPkg/Virtio10: Add virtio-mmio 1.0 defines Gerd Hoffmann
2021-06-09  5:06 ` Gerd Hoffmann [this message]
2021-06-09 10:34 ` [edk2-devel] [PATCH 0/2] Quo vadis virtio-mmio? Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210609050601.2754389-3-kraxel@redhat.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox