From: "PierreGondois" <pierre.gondois@arm.com>
To: devel@edk2.groups.io, Sami Mujawar <sami.mujawar@arm.com>,
Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>,
Leif Lindholm <leif@nuviainc.com>,
Akanksha Jain <akanksha.jain2@arm.com>,
Alexandru Elisei <alexandru.elisei@arm.com>
Subject: [PATCH v1 0/5] Add ACPI support for Kvmtool
Date: Wed, 23 Jun 2021 15:06:35 +0100 [thread overview]
Message-ID: <20210623140640.16754-1-Pierre.Gondois@arm.com> (raw)
From: Pierre Gondois <Pierre.Gondois@arm.com>
Kvmtool dynamically generates a device tree describing the platform
to boot on. Using the patch-sets listed below, the DynamicTables
framework generates ACPI tables describing a similar platform.
This patch-set:
- adds a ConfigurationManager allowing to generate ACPI tables
for Kvmtool
- adds the acpiview command line utility to the ArmVirtPkg
- update ArmVirtPkg.ci.yaml to add new words and use the
DynamicTablesPkg
This patch sets also set the default platform description format
to ACPI instead of the device tree (c.f.: PcdForceNoAcpi is set
to FALSE).
The changes can be seen at: https://github.com/PierreARM/edk2/tree/1456_Add_ACPI_support_for_Kvmtool_v1
The results of the CI can be seen at: https://github.com/tianocore/edk2/pull/1753
This patch-set is dependent over the following patch-sets:
[PATCH v1 00/10] Various DynamicTablesPkg modifications
https://edk2.groups.io/g/devel/message/76929
and:
[PATCH v1 00/13] Create a SSDT CPU topology generator
https://edk2.groups.io/g/devel/message/76941
and:
[PATCH v1 0/7] Create a SSDT PCIe generator
https://edk2.groups.io/g/devel/message/76958
and:
[PATCH v1 00/14] Implement a FdtHwInfoParserLib
https://edk2.groups.io/g/devel/message/76967
and:
[PATCH v1 0/5] Add DynamicPlatRepoLib
https://edk2.groups.io/g/devel/message/76984
Pierre Gondois (1):
ArmVirtPkg: Add cspell exceptions
Sami Mujawar (4):
ArmVirtPkg: Add DSDT ACPI table for Kvmtool firmware
ArmVirtPkg: Add Configuration Manager for Kvmtool firmware
ArmVirtPkg: Enable ACPI support for Kvmtool
ArmVirtPkg: Enable Acpiview for ArmVirtPkg
ArmVirtPkg/ArmVirt.dsc.inc | 3 +-
ArmVirtPkg/ArmVirtKvmTool.dsc | 18 +-
ArmVirtPkg/ArmVirtKvmTool.fdf | 11 +
ArmVirtPkg/ArmVirtPkg.ci.yaml | 3 +
.../KvmtoolCfgMgrDxe/AslTables/Dsdt.asl | 19 +
.../KvmtoolCfgMgrDxe/ConfigurationManager.c | 948 ++++++++++++++++++
.../KvmtoolCfgMgrDxe/ConfigurationManager.h | 94 ++
.../ConfigurationManagerDxe.inf | 58 ++
8 files changed, 1151 insertions(+), 3 deletions(-)
create mode 100644 ArmVirtPkg/KvmtoolCfgMgrDxe/AslTables/Dsdt.asl
create mode 100644 ArmVirtPkg/KvmtoolCfgMgrDxe/ConfigurationManager.c
create mode 100644 ArmVirtPkg/KvmtoolCfgMgrDxe/ConfigurationManager.h
create mode 100644 ArmVirtPkg/KvmtoolCfgMgrDxe/ConfigurationManagerDxe.inf
--
2.17.1
next reply other threads:[~2021-06-23 14:06 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-23 14:06 PierreGondois [this message]
2021-06-23 14:06 ` [PATCH v1 1/5] ArmVirtPkg: Add cspell exceptions PierreGondois
2021-06-24 11:11 ` [edk2-devel] " Laszlo Ersek
2021-06-23 14:06 ` [PATCH v1 2/5] ArmVirtPkg: Add DSDT ACPI table for Kvmtool firmware PierreGondois
2021-06-24 11:13 ` [edk2-devel] " Laszlo Ersek
2021-06-23 14:06 ` [PATCH v1 3/5] ArmVirtPkg: Add Configuration Manager " PierreGondois
2021-06-24 12:30 ` [edk2-devel] " Laszlo Ersek
2021-06-24 12:35 ` Laszlo Ersek
2021-06-23 14:06 ` [PATCH v1 4/5] ArmVirtPkg: Enable ACPI support for Kvmtool PierreGondois
2021-06-24 12:50 ` [edk2-devel] " Laszlo Ersek
2021-06-23 14:06 ` [PATCH v1 5/5] ArmVirtPkg: Enable Acpiview for ArmVirtPkg PierreGondois
2021-06-24 12:59 ` [edk2-devel] " Laszlo Ersek
2021-06-24 13:07 ` Laszlo Ersek
2021-06-24 11:51 ` [edk2-devel] [PATCH v1 0/5] Add ACPI support for Kvmtool Laszlo Ersek
2021-06-24 13:02 ` Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210623140640.16754-1-Pierre.Gondois@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox