From: "Michael Kubacki" <mikuback@linux.microsoft.com>
To: devel@edk2.groups.io
Cc: Agyeman Prince <prince.agyeman@intel.com>,
Nate DeSimone <nathaniel.l.desimone@intel.com>
Subject: [edk2-platforms][PATCH v4 40/41] SimicsIch10Pkg/BasePchSpiCommonLib: Identify flash regions by GUID
Date: Fri, 25 Jun 2021 18:49:52 -0400 [thread overview]
Message-ID: <20210625224953.469-1-mikuback@linux.microsoft.com> (raw)
From: Michael Kubacki <michael.kubacki@microsoft.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3307
Updates the library to identify flash regions by GUID and internally
map the GUID entries to values specific to SimicsIch10Pkg.
Cc: Agyeman Prince <prince.agyeman@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
---
Silicon/Intel/SimicsIch10Pkg/LibraryPrivate/BasePchSpiCommonLib/SpiCommon.c | 139 ++++++++++++++++----
Silicon/Intel/SimicsIch10Pkg/IncludePrivate/Library/PchSpiCommonLib.h | 20 +--
Silicon/Intel/SimicsIch10Pkg/LibraryPrivate/BasePchSpiCommonLib/BasePchSpiCommonLib.inf | 11 ++
3 files changed, 137 insertions(+), 33 deletions(-)
diff --git a/Silicon/Intel/SimicsIch10Pkg/LibraryPrivate/BasePchSpiCommonLib/SpiCommon.c b/Silicon/Intel/SimicsIch10Pkg/LibraryPrivate/BasePchSpiCommonLib/SpiCommon.c
index fc2a8be76b6a..04dbd921c091 100644
--- a/Silicon/Intel/SimicsIch10Pkg/LibraryPrivate/BasePchSpiCommonLib/SpiCommon.c
+++ b/Silicon/Intel/SimicsIch10Pkg/LibraryPrivate/BasePchSpiCommonLib/SpiCommon.c
@@ -2,11 +2,13 @@
PCH SPI Common Driver implements the SPI Host Controller Compatibility Interface.
Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+ Copyright (c) Microsoft Corporation.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#include <Uefi/UefiBaseType.h>
+#include <Guid/FlashRegion.h>
#include <Library/IoLib.h>
#include <Library/DebugLib.h>
#include <Library/BaseMemoryLib.h>
@@ -16,6 +18,90 @@
#include <IncludePrivate/Library/PchSpiCommonLib.h>
#include <Register/X58Ich10.h>
+typedef enum {
+ FlashRegionDescriptor,
+ FlashRegionBios,
+ FlashRegionMe,
+ FlashRegionGbe,
+ FlashRegionPlatformData,
+ FlashRegionDer,
+ FlashRegionAll,
+ FlashRegionMax
+} FLASH_REGION_TYPE;
+
+typedef struct {
+ EFI_GUID *Guid;
+ FLASH_REGION_TYPE Type;
+} FLASH_REGION_MAPPING;
+
+FLASH_REGION_MAPPING mFlashRegionTypes[] = {
+ {
+ &gFlashRegionDescriptorGuid,
+ FlashRegionDescriptor
+ },
+ {
+ &gFlashRegionBiosGuid,
+ FlashRegionBios
+ },
+ {
+ &gFlashRegionMeGuid,
+ FlashRegionMe
+ },
+ {
+ &gFlashRegionGbeGuid,
+ FlashRegionGbe
+ },
+ {
+ &gFlashRegionPlatformDataGuid,
+ FlashRegionPlatformData
+ },
+ {
+ &gFlashRegionDerGuid,
+ FlashRegionDer
+ },
+ {
+ &gFlashRegionAllGuid,
+ FlashRegionAll
+ },
+ {
+ &gFlashRegionMaxGuid,
+ FlashRegionMax
+ }
+};
+
+/**
+ Returns the type of a flash region given its GUID.
+
+ @param[in] FlashRegionGuid Pointer to the flash region GUID.
+ @param[out] FlashRegionType Pointer to a buffer that will be set to the flash region type value.
+
+ @retval EFI_SUCCESS The flash region type was found for the given flash region GUID.
+ @retval EFI_INVALID_PARAMETER A pointer argument passed to the function is NULL.
+ @retval EFI_NOT_FOUND The flash region type was not found for the given flash region GUID.
+
+**/
+EFI_STATUS
+GetFlashRegionType (
+ IN EFI_GUID *FlashRegionGuid,
+ OUT FLASH_REGION_TYPE *FlashRegionType
+ )
+{
+ UINTN Index;
+
+ if (FlashRegionGuid == NULL || FlashRegionType == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ for (Index = 0; Index < ARRAY_SIZE (mFlashRegionTypes); Index++) {
+ if (CompareGuid (mFlashRegionTypes[Index].Guid, FlashRegionGuid)) {
+ *FlashRegionType = mFlashRegionTypes[Index].Type;
+ return EFI_SUCCESS;
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
+
/**
Initialize an SPI protocol instance.
@@ -145,7 +231,7 @@ PchPmTimerStallRuntimeSafe (
Read data from the flash part.
@param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] FlashRegionGuid The Flash Region GUID for flash cycle which corresponds to the type in the descriptor.
@param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
@param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
@param[out] Buffer The Pointer to caller-allocated buffer containing the dada received.
@@ -159,7 +245,7 @@ EFI_STATUS
EFIAPI
SpiProtocolFlashRead (
IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
+ IN EFI_GUID *FlashRegionGuid,
IN UINT32 Address,
IN UINT32 ByteCount,
OUT UINT8 *Buffer
@@ -172,7 +258,7 @@ SpiProtocolFlashRead (
//
Status = SendSpiCmd (
This,
- FlashRegionType,
+ FlashRegionGuid,
FlashCycleRead,
Address,
ByteCount,
@@ -185,7 +271,7 @@ SpiProtocolFlashRead (
Write data to the flash part.
@param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] FlashRegionGuid The Flash Region GUID for flash cycle which corresponds to the type in the descriptor.
@param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
@param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
@param[in] Buffer Pointer to caller-allocated buffer containing the data sent during the SPI cycle.
@@ -198,7 +284,7 @@ EFI_STATUS
EFIAPI
SpiProtocolFlashWrite (
IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
+ IN EFI_GUID *FlashRegionGuid,
IN UINT32 Address,
IN UINT32 ByteCount,
IN UINT8 *Buffer
@@ -211,7 +297,7 @@ SpiProtocolFlashWrite (
//
Status = SendSpiCmd (
This,
- FlashRegionType,
+ FlashRegionGuid,
FlashCycleWrite,
Address,
ByteCount,
@@ -224,7 +310,7 @@ SpiProtocolFlashWrite (
Erase some area on the flash part.
@param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] FlashRegionGuid The Flash Region GUID for flash cycle which corresponds to the type in the descriptor.
@param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
@param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
@@ -236,7 +322,7 @@ EFI_STATUS
EFIAPI
SpiProtocolFlashErase (
IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
+ IN EFI_GUID *FlashRegionGuid,
IN UINT32 Address,
IN UINT32 ByteCount
)
@@ -248,7 +334,7 @@ SpiProtocolFlashErase (
//
Status = SendSpiCmd (
This,
- FlashRegionType,
+ FlashRegionGuid,
FlashCycleErase,
Address,
ByteCount,
@@ -303,7 +389,7 @@ SpiProtocolFlashReadSfdp (
//
Status = SendSpiCmd (
This,
- FlashRegionAll,
+ &gFlashRegionAllGuid,
FlashCycleReadSfdp,
FlashAddress,
ByteCount,
@@ -356,7 +442,7 @@ SpiProtocolFlashReadJedecId (
//
Status = SendSpiCmd (
This,
- FlashRegionAll,
+ &gFlashRegionAllGuid,
FlashCycleReadJedecId,
Address,
ByteCount,
@@ -391,7 +477,7 @@ SpiProtocolFlashWriteStatus (
//
Status = SendSpiCmd (
This,
- FlashRegionAll,
+ &gFlashRegionAllGuid,
FlashCycleWriteStatus,
0,
ByteCount,
@@ -426,7 +512,7 @@ SpiProtocolFlashReadStatus (
//
Status = SendSpiCmd (
This,
- FlashRegionAll,
+ &gFlashRegionAllGuid,
FlashCycleReadStatus,
0,
ByteCount,
@@ -439,7 +525,7 @@ SpiProtocolFlashReadStatus (
Get the SPI region base and size, based on the enum type
@param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for for the base address which is listed in the Descriptor.
+ @param[in] FlashRegionGuid The Flash Region GUID for the base address which corresponds to the type in the descriptor.
@param[out] BaseAddress The Flash Linear Address for the Region 'n' Base
@param[out] RegionSize The size for the Region 'n'
@@ -451,17 +537,24 @@ EFI_STATUS
EFIAPI
SpiProtocolGetRegionAddress (
IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
+ IN EFI_GUID *FlashRegionGuid,
OUT UINT32 *BaseAddress,
OUT UINT32 *RegionSize
)
{
- SPI_INSTANCE *SpiInstance;
- UINTN PchSpiBar0;
- UINT32 ReadValue;
+ EFI_STATUS Status;
+ FLASH_REGION_TYPE FlashRegionType;
+ SPI_INSTANCE *SpiInstance;
+ UINTN PchSpiBar0;
+ UINT32 ReadValue;
SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
+ Status = GetFlashRegionType (FlashRegionGuid, &FlashRegionType);
+ if (EFI_ERROR (Status)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
if (FlashRegionType >= FlashRegionMax) {
return EFI_INVALID_PARAMETER;
}
@@ -542,7 +635,7 @@ SpiProtocolReadPchSoftStrap (
//
Status = SendSpiCmd (
This,
- FlashRegionDescriptor,
+ &gFlashRegionDescriptorGuid,
FlashCycleRead,
StrapFlashAddr,
ByteCount,
@@ -600,7 +693,7 @@ SpiProtocolReadCpuSoftStrap (
//
Status = SendSpiCmd (
This,
- FlashRegionDescriptor,
+ &gFlashRegionDescriptorGuid,
FlashCycleRead,
StrapFlashAddr,
ByteCount,
@@ -613,7 +706,7 @@ SpiProtocolReadCpuSoftStrap (
This function sends the programmed SPI command to the slave device.
@param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] SpiRegionType The SPI Region type for flash cycle which is listed in the Descriptor
+ @param[in] FlashRegionGuid The Flash Region GUID for flash cycle which corresponds to the type in the descriptor.
@param[in] FlashCycleType The Flash SPI cycle type list in HSFC (Hardware Sequencing Flash Control Register) register
@param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
@param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
@@ -627,7 +720,7 @@ SpiProtocolReadCpuSoftStrap (
EFI_STATUS
SendSpiCmd (
IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
+ IN EFI_GUID *FlashRegionGuid,
IN FLASH_CYCLE_TYPE FlashCycleType,
IN UINT32 Address,
IN UINT32 ByteCount,
@@ -682,7 +775,7 @@ SendSpiCmd (
goto SendSpiCmdEnd;
}
- Status = SpiProtocolGetRegionAddress (This, FlashRegionType, &HardwareSpiAddr, &FlashRegionSize);
+ Status = SpiProtocolGetRegionAddress (This, FlashRegionGuid, &HardwareSpiAddr, &FlashRegionSize);
if (EFI_ERROR (Status)) {
goto SendSpiCmdEnd;
}
diff --git a/Silicon/Intel/SimicsIch10Pkg/IncludePrivate/Library/PchSpiCommonLib.h b/Silicon/Intel/SimicsIch10Pkg/IncludePrivate/Library/PchSpiCommonLib.h
index 2c8162ac8170..603e141e2058 100644
--- a/Silicon/Intel/SimicsIch10Pkg/IncludePrivate/Library/PchSpiCommonLib.h
+++ b/Silicon/Intel/SimicsIch10Pkg/IncludePrivate/Library/PchSpiCommonLib.h
@@ -135,7 +135,7 @@ ReleaseSpiBar0 (
Read data from the flash part.
@param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] FlashRegionGuid The Flash Region GUID for flash cycle which corresponds to the type in the descriptor.
@param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
@param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
@param[out] Buffer The Pointer to caller-allocated buffer containing the dada received.
@@ -149,7 +149,7 @@ EFI_STATUS
EFIAPI
SpiProtocolFlashRead (
IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
+ IN EFI_GUID *FlashRegionGuid,
IN UINT32 Address,
IN UINT32 ByteCount,
OUT UINT8 *Buffer
@@ -159,7 +159,7 @@ SpiProtocolFlashRead (
Write data to the flash part.
@param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] FlashRegionGuid The Flash Region GUID for flash cycle which corresponds to the type in the descriptor.
@param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
@param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
@param[in] Buffer Pointer to caller-allocated buffer containing the data sent during the SPI cycle.
@@ -172,7 +172,7 @@ EFI_STATUS
EFIAPI
SpiProtocolFlashWrite (
IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
+ IN EFI_GUID *FlashRegionGuid,
IN UINT32 Address,
IN UINT32 ByteCount,
IN UINT8 *Buffer
@@ -182,7 +182,7 @@ SpiProtocolFlashWrite (
Erase some area on the flash part.
@param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] FlashRegionGuid The Flash Region GUID for flash cycle which corresponds to the type in the descriptor.
@param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
@param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
@@ -194,7 +194,7 @@ EFI_STATUS
EFIAPI
SpiProtocolFlashErase (
IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
+ IN EFI_GUID *FlashRegionGuid,
IN UINT32 Address,
IN UINT32 ByteCount
);
@@ -287,7 +287,7 @@ SpiProtocolFlashReadStatus (
Get the SPI region base and size, based on the enum type
@param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for for the base address which is listed in the Descriptor.
+ @param[in] FlashRegionGuid The Flash Region GUID for the base address which corresponds to the type in the descriptor.
@param[out] BaseAddress The Flash Linear Address for the Region 'n' Base
@param[out] RegionSize The size for the Region 'n'
@@ -299,7 +299,7 @@ EFI_STATUS
EFIAPI
SpiProtocolGetRegionAddress (
IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
+ IN EFI_GUID *FlashRegionGuid,
OUT UINT32 *BaseAddress,
OUT UINT32 *RegionSize
);
@@ -354,7 +354,7 @@ SpiProtocolReadCpuSoftStrap (
This function sends the programmed SPI command to the slave device.
@param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] SpiRegionType The SPI Region type for flash cycle which is listed in the Descriptor
+ @param[in] FlashRegionGuid The Flash Region GUID for flash cycle which corresponds to the type in the descriptor.
@param[in] FlashCycleType The Flash SPI cycle type list in HSFC (Hardware Sequencing Flash Control Register) register
@param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
@param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
@@ -368,7 +368,7 @@ SpiProtocolReadCpuSoftStrap (
EFI_STATUS
SendSpiCmd (
IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
+ IN EFI_GUID *FlashRegionGuid,
IN FLASH_CYCLE_TYPE FlashCycleType,
IN UINT32 Address,
IN UINT32 ByteCount,
diff --git a/Silicon/Intel/SimicsIch10Pkg/LibraryPrivate/BasePchSpiCommonLib/BasePchSpiCommonLib.inf b/Silicon/Intel/SimicsIch10Pkg/LibraryPrivate/BasePchSpiCommonLib/BasePchSpiCommonLib.inf
index b5aa13c1c56d..3a64005b5690 100644
--- a/Silicon/Intel/SimicsIch10Pkg/LibraryPrivate/BasePchSpiCommonLib/BasePchSpiCommonLib.inf
+++ b/Silicon/Intel/SimicsIch10Pkg/LibraryPrivate/BasePchSpiCommonLib/BasePchSpiCommonLib.inf
@@ -2,6 +2,7 @@
# Component description file for the PchSpiCommonLib
#
# Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+# Copyright (c) Microsoft Corporation.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -30,3 +31,13 @@ [LibraryClasses]
[Pcd]
gIntelSiliconPkgTokenSpaceGuid.PcdBiosAreaBaseAddress ## CONSUMES
gIntelSiliconPkgTokenSpaceGuid.PcdBiosSize ## CONSUMES
+
+[Guids]
+ gFlashRegionDescriptorGuid
+ gFlashRegionBiosGuid
+ gFlashRegionMeGuid
+ gFlashRegionGbeGuid
+ gFlashRegionPlatformDataGuid
+ gFlashRegionDerGuid
+ gFlashRegionAllGuid
+ gFlashRegionMaxGuid
--
2.28.0.windows.1
next reply other threads:[~2021-06-25 22:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-25 22:49 Michael Kubacki [this message]
2021-06-25 22:49 ` [edk2-platforms][PATCH v4 41/41] TigerlakeSiliconPkg/BasePchSpiCommonLib: Identify flash regions by GUID Michael Kubacki
-- strict thread matches above, loose matches on Subject: below --
2021-06-25 21:20 [edk2-platforms][PATCH v4 00/41] Consolidate SpiFlashCommonLib instances Michael Kubacki
[not found] ` <20210625212120.235-41-mikuback@linux.microsoft.com>
2021-07-29 0:47 ` [edk2-platforms][PATCH v4 40/41] SimicsIch10Pkg/BasePchSpiCommonLib: Identify flash regions by GUID Nate DeSimone
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210625224953.469-1-mikuback@linux.microsoft.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox