From: "Brijesh Singh" <brijesh.singh@amd.com>
To: devel@edk2.groups.io
Cc: Brijesh Singh <brijesh.singh@amd.com>,
James Bottomley <jejb@linux.ibm.com>, Min Xu <min.m.xu@intel.com>,
Jiewen Yao <jiewen.yao@intel.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
Jordan Justen <jordan.l.justen@intel.com>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Laszlo Ersek <lersek@redhat.com>,
Erdem Aktas <erdemaktas@google.com>
Subject: [PATCH v2 2/3] OvmfPkg/ResetVector: add the macro to invoke MSR protocol based VMGEXIT
Date: Tue, 27 Jul 2021 13:10:23 -0500 [thread overview]
Message-ID: <20210727181024.28770-3-brijesh.singh@amd.com> (raw)
In-Reply-To: <20210727181024.28770-1-brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The upcoming SEV-SNP support will need to make a few additional MSR
protocol based VMGEXIT's. Add a macro that wraps the common setup and
response validation logic in one place to keep the code readable.
While at it, define SEV_STATUS_MSR that will be used to get the SEV STATUS
MSR instead of open coding it.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb+tianocore@kernel.org>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
---
OvmfPkg/ResetVector/Ia32/AmdSev.asm | 71 +++++++++++++++++++----------
1 file changed, 47 insertions(+), 24 deletions(-)
diff --git a/OvmfPkg/ResetVector/Ia32/AmdSev.asm b/OvmfPkg/ResetVector/Ia32/AmdSev.asm
index 2c9d990af55f..93ba917f36d2 100644
--- a/OvmfPkg/ResetVector/Ia32/AmdSev.asm
+++ b/OvmfPkg/ResetVector/Ia32/AmdSev.asm
@@ -35,6 +35,44 @@ BITS 32
%define CPUID_INSN_LEN 2
+%define SEV_GHCB_MSR 0xc0010130
+%define SEV_STATUS_MSR 0xc0010131
+
+; Macro is used to issue the MSR protocol based VMGEXIT. The caller is
+; responsible to populate values in the EDX:EAX registers. After the vmmcall
+; returns, it verifies that the response code matches with the expected
+; code. If it does not match then terminate the guest. The result of request
+; is returned in the EDX:EAX.
+;
+; args 1:Request code, 2: Response code
+%macro VmgExit 2
+ ;
+ ; Add request code:
+ ; GHCB_MSR[11:0] = Request code
+ or eax, %1
+
+ mov ecx, SEV_GHCB_MSR
+ wrmsr
+
+ ; Issue VMGEXIT - NASM doesn't support the vmmcall instruction in 32-bit
+ ; mode, so work around this by temporarily switching to 64-bit mode.
+ ;
+BITS 64
+ rep vmmcall
+BITS 32
+
+ mov ecx, SEV_GHCB_MSR
+ rdmsr
+
+ ;
+ ; Verify the reponse code, if it does not match then request to terminate
+ ; GHCB_MSR[11:0] = Response code
+ mov ecx, eax
+ and ecx, 0xfff
+ cmp ecx, %2
+ jne SevEsUnexpectedRespTerminate
+%endmacro
+
; Check if Secure Encrypted Virtualization (SEV) features are enabled.
;
; Register usage is tight in this routine, so multiple calls for the
@@ -84,7 +122,7 @@ CheckSevFeatures:
; Check if SEV memory encryption is enabled
; MSR_0xC0010131 - Bit 0 (SEV enabled)
- mov ecx, 0xc0010131
+ mov ecx, SEV_STATUS_MSR
rdmsr
bt eax, 0
jnc NoSev
@@ -99,7 +137,7 @@ CheckSevFeatures:
; Check if SEV-ES is enabled
; MSR_0xC0010131 - Bit 1 (SEV-ES enabled)
- mov ecx, 0xc0010131
+ mov ecx, SEV_STATUS_MSR
rdmsr
bt eax, 1
jnc GetSevEncBit
@@ -196,10 +234,10 @@ SevEsIdtNotCpuid:
mov eax, 1
jmp SevEsIdtTerminate
-SevEsIdtNoCpuidResponse:
+SevEsUnexpectedRespTerminate:
;
; Use VMGEXIT to request termination.
- ; 2 - GHCB_CPUID_RESPONSE not received
+ ; 2 - Unexpected Response is received
;
mov eax, 2
@@ -215,7 +253,7 @@ SevEsIdtTerminate:
shl eax, 16
or eax, 0x1100
xor edx, edx
- mov ecx, 0xc0010130
+ mov ecx, SEV_GHCB_MSR
wrmsr
;
; Issue VMGEXIT - NASM doesn't support the vmmcall instruction in 32-bit
@@ -275,7 +313,7 @@ SevEsIdtVmmComm:
mov [esp + VC_CPUID_REQUEST_REGISTER], eax
; Save current GHCB MSR value
- mov ecx, 0xc0010130
+ mov ecx, SEV_GHCB_MSR
rdmsr
mov [esp + VC_GHCB_MSR_EAX], eax
mov [esp + VC_GHCB_MSR_EDX], edx
@@ -292,31 +330,16 @@ NextReg:
jge VmmDone
shl eax, GHCB_CPUID_REGISTER_SHIFT
- or eax, GHCB_CPUID_REQUEST
mov edx, [esp + VC_CPUID_FUNCTION]
- mov ecx, 0xc0010130
- wrmsr
- ;
- ; Issue VMGEXIT - NASM doesn't support the vmmcall instruction in 32-bit
- ; mode, so work around this by temporarily switching to 64-bit mode.
- ;
-BITS 64
- rep vmmcall
-BITS 32
+ VmgExit GHCB_CPUID_REQUEST, GHCB_CPUID_RESPONSE
;
- ; Read GHCB MSR
+ ; Response GHCB MSR
; GHCB_MSR[63:32] = CPUID register value
; GHCB_MSR[31:30] = CPUID register
; GHCB_MSR[11:0] = CPUID response protocol
;
- mov ecx, 0xc0010130
- rdmsr
- mov ecx, eax
- and ecx, 0xfff
- cmp ecx, GHCB_CPUID_RESPONSE
- jne SevEsIdtNoCpuidResponse
; Save returned value
shr eax, GHCB_CPUID_REGISTER_SHIFT
@@ -334,7 +357,7 @@ VmmDone:
;
mov eax, [esp + VC_GHCB_MSR_EAX]
mov edx, [esp + VC_GHCB_MSR_EDX]
- mov ecx, 0xc0010130
+ mov ecx, SEV_GHCB_MSR
wrmsr
mov eax, [esp + VC_CPUID_RESULT_EAX]
--
2.17.1
next prev parent reply other threads:[~2021-07-27 18:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-27 18:10 [PATCH v2 0/3] Move the SEV specific changes in ResetVector in separate file Brijesh Singh
2021-07-27 18:10 ` [PATCH v2 1/3] OvmfPkg/ResetVector: move SEV specific code in a " Brijesh Singh
2021-07-27 18:10 ` Brijesh Singh [this message]
2021-07-27 18:10 ` [PATCH v2 3/3] OvmfPkg/ResetVector: add the macro to request guest termination Brijesh Singh
2021-07-29 1:08 ` [PATCH v2 0/3] Move the SEV specific changes in ResetVector in separate file Yao, Jiewen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210727181024.28770-3-brijesh.singh@amd.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox