From: "Etienne Carriere" <etienne.carriere@linaro.org>
To: devel@edk2.groups.io
Cc: Achin Gupta <achin.gupta@arm.com>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Jiewen Yao <jiewen.yao@intel.com>,
Leif Lindholm <leif@nuviainc.com>,
Sami Mujawar <sami.mujawar@arm.com>,
Sughosh Ganu <sughosh.ganu@linaro.org>,
Liming Gao <gaoliming@byosoft.com.cn>,
Etienne Carriere <etienne.carriere@linaro.org>
Subject: [PATCH v5 4/5] StandaloneMmPkg: fix pointer/int casts against 32bit architectures
Date: Mon, 9 Aug 2021 17:19:45 +0200 [thread overview]
Message-ID: <20210809151946.27600-4-etienne.carriere@linaro.org> (raw)
In-Reply-To: <20210809151946.27600-1-etienne.carriere@linaro.org>
Use intermediate (UINTN) cast when casting int from/to pointer. This
is needed as UINT64 values cast from/to 32bit pointer for 32bit
architectures.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
---
No change since v4
Changes since v3:
- Remove Cc tags and apply review tags.
No change since v2
No change since v1
---
StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.c | 8 ++++----
StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/CreateHobList.c | 14 +++++++-------
StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/StandaloneMmCoreEntryPoint.c | 2 +-
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.c b/StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.c
index 6884095c49..d4590bcd19 100644
--- a/StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.c
+++ b/StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.c
@@ -164,8 +164,8 @@ StandaloneMmCpuInitialize (
// Share the entry point of the CPU driver
DEBUG ((DEBUG_INFO, "Sharing Cpu Driver EP *0x%lx = 0x%lx\n",
- (UINT64) CpuDriverEntryPointDesc->ArmTfCpuDriverEpPtr,
- (UINT64) PiMmStandaloneArmTfCpuDriverEntry));
+ (UINTN) CpuDriverEntryPointDesc->ArmTfCpuDriverEpPtr,
+ (UINTN) PiMmStandaloneArmTfCpuDriverEntry));
*(CpuDriverEntryPointDesc->ArmTfCpuDriverEpPtr) = PiMmStandaloneArmTfCpuDriverEntry;
// Find the descriptor that contains the whereabouts of the buffer for
@@ -180,8 +180,8 @@ StandaloneMmCpuInitialize (
return Status;
}
- DEBUG ((DEBUG_INFO, "mNsCommBuffer.PhysicalStart - 0x%lx\n", (UINT64) NsCommBufMmramRange->PhysicalStart));
- DEBUG ((DEBUG_INFO, "mNsCommBuffer.PhysicalSize - 0x%lx\n", (UINT64) NsCommBufMmramRange->PhysicalSize));
+ DEBUG ((DEBUG_INFO, "mNsCommBuffer.PhysicalStart - 0x%lx\n", (UINTN) NsCommBufMmramRange->PhysicalStart));
+ DEBUG ((DEBUG_INFO, "mNsCommBuffer.PhysicalSize - 0x%lx\n", (UINTN) NsCommBufMmramRange->PhysicalSize));
CopyMem (&mNsCommBuffer, NsCommBufMmramRange, sizeof(EFI_MMRAM_DESCRIPTOR));
DEBUG ((DEBUG_INFO, "mNsCommBuffer: 0x%016lx - 0x%lx\n", mNsCommBuffer.CpuStart, mNsCommBuffer.PhysicalSize));
diff --git a/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/CreateHobList.c b/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/CreateHobList.c
index e8fb96bd6e..4d4cf3d5ff 100644
--- a/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/CreateHobList.c
+++ b/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/CreateHobList.c
@@ -72,14 +72,14 @@ CreateHobListFromBootInfo (
// Create a hoblist with a PHIT and EOH
HobStart = HobConstructor (
- (VOID *) PayloadBootInfo->SpMemBase,
+ (VOID *) (UINTN) PayloadBootInfo->SpMemBase,
(UINTN) PayloadBootInfo->SpMemLimit - PayloadBootInfo->SpMemBase,
- (VOID *) PayloadBootInfo->SpHeapBase,
- (VOID *) (PayloadBootInfo->SpHeapBase + PayloadBootInfo->SpHeapSize)
+ (VOID *) (UINTN) PayloadBootInfo->SpHeapBase,
+ (VOID *) (UINTN) (PayloadBootInfo->SpHeapBase + PayloadBootInfo->SpHeapSize)
);
// Check that the Hoblist starts at the bottom of the Heap
- ASSERT (HobStart == (VOID *) PayloadBootInfo->SpHeapBase);
+ ASSERT (HobStart == (VOID *) (UINTN) PayloadBootInfo->SpHeapBase);
// Build a Boot Firmware Volume HOB
BuildFvHob (PayloadBootInfo->SpImageBase, PayloadBootInfo->SpImageSize);
@@ -190,9 +190,9 @@ CreateHobListFromBootInfo (
MmramRanges[3].RegionState = EFI_CACHEABLE | EFI_ALLOCATED;
// Base and size of heap memory shared by all cpus
- MmramRanges[4].PhysicalStart = (EFI_PHYSICAL_ADDRESS) HobStart;
- MmramRanges[4].CpuStart = (EFI_PHYSICAL_ADDRESS) HobStart;
- MmramRanges[4].PhysicalSize = HobStart->EfiFreeMemoryBottom - (EFI_PHYSICAL_ADDRESS) HobStart;
+ MmramRanges[4].PhysicalStart = (EFI_PHYSICAL_ADDRESS) (UINTN) HobStart;
+ MmramRanges[4].CpuStart = (EFI_PHYSICAL_ADDRESS) (UINTN) HobStart;
+ MmramRanges[4].PhysicalSize = HobStart->EfiFreeMemoryBottom - (EFI_PHYSICAL_ADDRESS) (UINTN) HobStart;
MmramRanges[4].RegionState = EFI_CACHEABLE | EFI_ALLOCATED;
// Base and size of heap memory shared by all cpus
diff --git a/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/StandaloneMmCoreEntryPoint.c b/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/StandaloneMmCoreEntryPoint.c
index 6c50f470aa..b445d6942e 100644
--- a/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/StandaloneMmCoreEntryPoint.c
+++ b/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/StandaloneMmCoreEntryPoint.c
@@ -328,7 +328,7 @@ _ModuleEntryPoint (
// Locate PE/COFF File information for the Standalone MM core module
Status = LocateStandaloneMmCorePeCoffData (
- (EFI_FIRMWARE_VOLUME_HEADER *) PayloadBootInfo->SpImageBase,
+ (EFI_FIRMWARE_VOLUME_HEADER *) (UINTN) PayloadBootInfo->SpImageBase,
&TeData,
&TeDataSize
);
--
2.17.1
next prev parent reply other threads:[~2021-08-09 15:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-09 15:19 [PATCH v5 1/5] ArmPkg/IndustryStandard: 32b/64b agnostic FF-A, Mm SVC and Std SMC IDs Etienne Carriere
2021-08-09 15:19 ` [PATCH v5 2/5] ArmPkg: prepare 32bit ARM build of StandaloneMmPkg Etienne Carriere
2021-08-11 1:51 ` 回复: " gaoliming
2021-08-11 10:46 ` [edk2-devel] " Ard Biesheuvel
2021-08-11 11:37 ` Ard Biesheuvel
2021-08-11 12:12 ` Etienne Carriere
2021-08-11 12:21 ` Ard Biesheuvel
2021-08-09 15:19 ` [PATCH v5 3/5] GenFv: Arm: support images entered in Thumb mode Etienne Carriere
2021-08-09 15:19 ` Etienne Carriere [this message]
2021-08-09 15:19 ` [PATCH v5 5/5] StandaloneMmPkg: build for 32bit arm machines Etienne Carriere
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210809151946.27600-4-etienne.carriere@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox