[PATCH v2 1/5] OvmfPkg/OvmfXen: set PcdAcpiS3Enable at initialization

["Lin, Gary (HPS OE-Linux)" <gary.lin@hpe.com>]

There are several functions in OvmfPkg/Library using
QemuFwCfgS3Enabled() to detect the S3 support status. However, in
MdeModulePkg, PcdAcpiS3Enable is used to check S3 support. Since
InitializeXenPlatform() didn't set PcdAcpiS3Enable as
InitializePlatform() did, this made the inconsistency between
drivers/functions.

For example, S3SaveStateDxe checked PcdAcpiS3Enable and skipped
S3BootScript because the default value is FALSE. On the other hand,
PlatformBootManagerBeforeConsole() from OvmfPkg/Library called
QemuFwCfgS3Enabled() and found it returned TRUE, so it invoked
SaveS3BootScript(). However, S3SaveStateDxe skipped S3BootScript, so
SaveS3BootScript() asserted due to EFI_NOT_FOUND.

This issue mainly affects "HVM Direct Kernel Boot". If "acpi_s3" is
set as "True" in xl.cfg, then the S3 Support bit is set and passed
with fw_cfg.

v2:
  - Amend the description and address "HVM Direct Kernel Boot"
  - Add the comment for the conditional test of QemuFwCfgS3Enabled()
  - Remove unused QemuFwCfgLib

Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Joey Li <jlee@suse.com>
Signed-off-by: Gary Lin <gary.lin@hpe.com>
---
 OvmfPkg/XenPlatformPei/XenPlatformPei.inf |  2 ++
 OvmfPkg/XenPlatformPei/Platform.c         | 13 +++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/OvmfPkg/XenPlatformPei/XenPlatformPei.inf b/OvmfPkg/XenPlatformPei/XenPlatformPei.inf
index 597cb6fcd7ff..20c27ff34b6c 100644
--- a/OvmfPkg/XenPlatformPei/XenPlatformPei.inf
+++ b/OvmfPkg/XenPlatformPei/XenPlatformPei.inf
@@ -57,6 +57,7 @@ [LibraryClasses]
   ResourcePublicationLib
   PeiServicesLib
   PeimEntryPoint
+  QemuFwCfgS3Lib
   MtrrLib
   MemEncryptSevLib
   PcdLib
@@ -79,6 +80,7 @@ [Pcd]
   gUefiOvmfPkgTokenSpaceGuid.PcdPciMmio64Base
   gUefiOvmfPkgTokenSpaceGuid.PcdPciMmio64Size
   gUefiOvmfPkgTokenSpaceGuid.PcdQ35TsegMbytes
+  gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable
   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
   gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved
   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode
diff --git a/OvmfPkg/XenPlatformPei/Platform.c b/OvmfPkg/XenPlatformPei/Platform.c
index a811e72ee301..e60478fdb493 100644
--- a/OvmfPkg/XenPlatformPei/Platform.c
+++ b/OvmfPkg/XenPlatformPei/Platform.c
@@ -26,6 +26,7 @@
 #include <Library/PciLib.h>
 #include <Library/PeimEntryPoint.h>
 #include <Library/PeiServicesLib.h>
+#include <Library/QemuFwCfgS3Lib.h>
 #include <Library/ResourcePublicationLib.h>
 #include <Guid/MemoryTypeInformation.h>
 #include <Ppi/MasterBootMode.h>
@@ -423,6 +424,8 @@ InitializeXenPlatform (
   IN CONST EFI_PEI_SERVICES     **PeiServices
   )
 {
+  EFI_STATUS    Status;
+
   DEBUG ((DEBUG_INFO, "Platform PEIM Loaded\n"));
 
   DebugDumpCmos ();
@@ -433,6 +436,16 @@ InitializeXenPlatform (
     CpuDeadLoop ();
   }
 
+  //
+  // This S3 conditional test is mainly for HVM Direct Kernel Boot since
+  // QEMU fwcfg isn't really supported other than that.
+  //
+  if (QemuFwCfgS3Enabled ()) {
+    DEBUG ((DEBUG_INFO, "S3 support was detected on QEMU\n"));
+    Status = PcdSetBoolS (PcdAcpiS3Enable, TRUE);
+    ASSERT_EFI_ERROR (Status);
+  }
+
   XenConnect ();
 
   BootModeInitialization ();
-- 
2.31.1