From: "Jeremy Linton" <jeremy.linton@arm.com>
To: devel@edk2.groups.io
Cc: pete@akeo.ie, ardb+tianocore@kernel.org, awarkentin@vmware.com,
Sunny.Wang@arm.com, samer.el-haj-mahmoud@arm.com,
Jeremy Linton <jeremy.linton@arm.com>
Subject: [PATCH v3 6/7] Platform/RaspberryPi: Enable NVMe boot on CM4
Date: Thu, 19 Aug 2021 23:16:18 -0500 [thread overview]
Message-ID: <20210820041619.87248-7-jeremy.linton@arm.com> (raw)
In-Reply-To: <20210820041619.87248-1-jeremy.linton@arm.com>
The CM4 has a number of carrier boards with PCIe
slots. With the PCIe changes in place its quite
possible to utilize a NVMe root device. Lets allow
people to boot from it.
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
Platform/RaspberryPi/RPi4/RPi4.dsc | 5 +++++
Platform/RaspberryPi/RPi4/RPi4.fdf | 5 +++++
2 files changed, 10 insertions(+)
diff --git a/Platform/RaspberryPi/RPi4/RPi4.dsc b/Platform/RaspberryPi/RPi4/RPi4.dsc
index babcbb2f41..25c29a0fbf 100644
--- a/Platform/RaspberryPi/RPi4/RPi4.dsc
+++ b/Platform/RaspberryPi/RPi4/RPi4.dsc
@@ -754,6 +754,11 @@
}
#
+ # NVMe boot devices
+ #
+ MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf
+
+ #
# UEFI application (Shell Embedded Boot Loader)
#
ShellPkg/Application/Shell/Shell.inf {
diff --git a/Platform/RaspberryPi/RPi4/RPi4.fdf b/Platform/RaspberryPi/RPi4/RPi4.fdf
index 3534cd3dc3..0c782d2f35 100644
--- a/Platform/RaspberryPi/RPi4/RPi4.fdf
+++ b/Platform/RaspberryPi/RPi4/RPi4.fdf
@@ -283,6 +283,11 @@ READ_LOCK_STATUS = TRUE
INF EmbeddedPkg/Drivers/NonCoherentIoMmuDxe/NonCoherentIoMmuDxe.inf
#
+ # NVMe boot devices
+ #
+ INF MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf
+
+ #
# SCSI Bus and Disk Driver
#
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
--
2.13.7
next prev parent reply other threads:[~2021-08-20 4:16 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-20 4:16 [PATCH v3 0/7] RPi4: Enable ACPI PCIe conduit Jeremy Linton
2021-08-20 4:16 ` [PATCH v3 1/7] Platform/RaspberryPi: Add XHCI/PCI selection menu Jeremy Linton
2021-08-20 20:14 ` Andrei Warkentin
2021-08-20 20:31 ` Samer El-Haj-Mahmoud
2021-08-20 4:16 ` [PATCH v3 2/7] Platform/RaspberryPi: Break XHCI into its own SSDT Jeremy Linton
2021-08-20 20:15 ` Andrei Warkentin
2021-08-20 4:16 ` [PATCH v3 3/7] Platform/RaspberryPi: Add PCIe SSDT Jeremy Linton
2021-08-20 20:15 ` Andrei Warkentin
2021-08-20 4:16 ` [PATCH v3 4/7] Silicon/Broadcom/Bcm27xx: Relax PCIe device restriction Jeremy Linton
2021-08-20 20:16 ` Andrei Warkentin
2021-08-20 4:16 ` [PATCH v3 5/7] Silicon/Broadcom/Bcm27xx: Move linkup check into the cfg accessor Jeremy Linton
2021-08-20 20:16 ` Andrei Warkentin
2021-08-22 13:37 ` Ard Biesheuvel
2021-08-22 13:47 ` Ard Biesheuvel
2021-08-20 4:16 ` Jeremy Linton [this message]
2021-08-20 20:16 ` [PATCH v3 6/7] Platform/RaspberryPi: Enable NVMe boot on CM4 Andrei Warkentin
2021-08-20 20:37 ` Samer El-Haj-Mahmoud
2021-08-20 4:16 ` [PATCH v3 7/7] Platform/RaspberryPi: Add Linux quirk support Jeremy Linton
2021-08-20 20:15 ` Andrei Warkentin
2021-08-20 20:35 ` Samer El-Haj-Mahmoud
2021-08-20 20:27 ` [PATCH v3 0/7] RPi4: Enable ACPI PCIe conduit Samer El-Haj-Mahmoud
[not found] ` <7d39c23-6578-6bb9-ab5f-9d242d7ff42d@invisible.ca>
2021-08-22 13:55 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210820041619.87248-7-jeremy.linton@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox