From: "Brijesh Singh" <brijesh.singh@amd.com>
To: devel@edk2.groups.io
Cc: James Bottomley <jejb@linux.ibm.com>, Min Xu <min.m.xu@intel.com>,
Jiewen Yao <jiewen.yao@intel.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
Jordan Justen <jordan.l.justen@intel.com>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Erdem Aktas <erdemaktas@google.com>,
Michael Roth <Michael.Roth@amd.com>,
Gerd Hoffmann <kraxel@redhat.com>,
Brijesh Singh <brijesh.singh@amd.com>,
Michael Roth <michael.roth@amd.com>
Subject: [PATCH v6 26/29] OvmfPkg/MemEncryptSevLib: skip page state change for Mmio address
Date: Wed, 1 Sep 2021 11:16:43 -0500 [thread overview]
Message-ID: <20210901161646.24763-27-brijesh.singh@amd.com> (raw)
In-Reply-To: <20210901161646.24763-1-brijesh.singh@amd.com>
The SetMemoryEncDec() is used by the higher level routines to set or clear
the page encryption mask for system RAM and Mmio address. When SEV-SNP is
active, in addition to set/clear page mask it also updates the RMP table.
The RMP table updates are required for the system RAM address and not
the Mmio address.
Add a new parameter in SetMemoryEncDec() to tell whether the specified
address is Mmio. If its Mmio then skip the page state change in the RMP
table.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
---
.../X64/PeiDxeVirtualMemory.c | 20 ++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/OvmfPkg/Library/BaseMemEncryptSevLib/X64/PeiDxeVirtualMemory.c b/OvmfPkg/Library/BaseMemEncryptSevLib/X64/PeiDxeVirtualMemory.c
index 56db1e4b6ecf..0bb86d768017 100644
--- a/OvmfPkg/Library/BaseMemEncryptSevLib/X64/PeiDxeVirtualMemory.c
+++ b/OvmfPkg/Library/BaseMemEncryptSevLib/X64/PeiDxeVirtualMemory.c
@@ -673,6 +673,7 @@ InternalMemEncryptSevCreateIdentityMap1G (
@param[in] Mode Set or Clear mode
@param[in] CacheFlush Flush the caches before applying the
encryption mask
+ @param[in] Mmio The physical address specified is Mmio
@retval RETURN_SUCCESS The attributes were cleared for the
memory region.
@@ -688,7 +689,8 @@ SetMemoryEncDec (
IN PHYSICAL_ADDRESS PhysicalAddress,
IN UINTN Length,
IN MAP_RANGE_MODE Mode,
- IN BOOLEAN CacheFlush
+ IN BOOLEAN CacheFlush,
+ IN BOOLEAN Mmio
)
{
PAGE_MAP_AND_DIRECTORY_POINTER *PageMapLevel4Entry;
@@ -711,14 +713,15 @@ SetMemoryEncDec (
DEBUG ((
DEBUG_VERBOSE,
- "%a:%a: Cr3Base=0x%Lx Physical=0x%Lx Length=0x%Lx Mode=%a CacheFlush=%u\n",
+ "%a:%a: Cr3Base=0x%Lx Physical=0x%Lx Length=0x%Lx Mode=%a CacheFlush=%u Mmio=%u\n",
gEfiCallerBaseName,
__FUNCTION__,
Cr3BaseAddress,
PhysicalAddress,
(UINT64)Length,
(Mode == SetCBit) ? "Encrypt" : "Decrypt",
- (UINT32)CacheFlush
+ (UINT32)CacheFlush,
+ (UINT32)Mmio
));
//
@@ -760,7 +763,7 @@ SetMemoryEncDec (
//
// The InternalSetPageState() is used for setting the page state in the RMP table.
//
- if ((Mode == ClearCBit) && MemEncryptSevSnpIsEnabled ()) {
+ if (!Mmio && (Mode == ClearCBit) && MemEncryptSevSnpIsEnabled ()) {
InternalSetPageState (PhysicalAddress, EFI_SIZE_TO_PAGES (Length), SevSnpPageShared, FALSE);
}
@@ -998,7 +1001,8 @@ InternalMemEncryptSevSetMemoryDecrypted (
PhysicalAddress,
Length,
ClearCBit,
- TRUE
+ TRUE,
+ FALSE
);
}
@@ -1031,7 +1035,8 @@ InternalMemEncryptSevSetMemoryEncrypted (
PhysicalAddress,
Length,
SetCBit,
- TRUE
+ TRUE,
+ FALSE
);
}
@@ -1064,6 +1069,7 @@ InternalMemEncryptSevClearMmioPageEncMask (
PhysicalAddress,
Length,
ClearCBit,
- FALSE
+ FALSE,
+ TRUE
);
}
--
2.17.1
next prev parent reply other threads:[~2021-09-01 16:17 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-01 16:16 [PATCH v6 00/29] Add AMD Secure Nested Paging (SEV-SNP) support Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 01/29] OvmfPkg: reserve SNP secrets page Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 02/29] OvmfPkg: reserve CPUID page for SEV-SNP Brijesh Singh
2021-09-02 8:04 ` Gerd Hoffmann
2021-09-02 12:28 ` Brijesh Singh
2021-09-02 21:17 ` Brijesh Singh
2021-09-03 6:28 ` Gerd Hoffmann
2021-09-03 11:56 ` [edk2-devel] " Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 03/29] OvmfPkg/ResetVector: introduce SEV-SNP boot block GUID Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 04/29] OvmfPkg/ResetVector: invalidate the GHCB page Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 05/29] OvmfPkg/ResetVector: check the vmpl level Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 06/29] OvmfPkg/ResetVector: pre-validate the data pages used in SEC phase Brijesh Singh
2021-09-02 8:20 ` Gerd Hoffmann
2021-09-06 1:10 ` [edk2-devel] " Min Xu
2021-09-06 12:16 ` Gerd Hoffmann
2021-09-06 13:19 ` Min Xu
2021-09-07 7:07 ` Gerd Hoffmann
2021-09-07 13:27 ` Brijesh Singh
2021-09-08 6:36 ` Min Xu
2021-09-14 3:49 ` Yao, Jiewen
2021-09-16 7:42 ` Gerd Hoffmann
2021-09-01 16:16 ` [PATCH v6 07/29] OvmfPkg/ResetVector: use SEV-SNP-validated CPUID values Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 08/29] UefiCpuPkg: Define the SEV-SNP specific dynamic PCDs Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 09/29] OvmfPkg/MemEncryptSevLib: add MemEncryptSevSnpEnabled() Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 10/29] OvmfPkg/SecMain: move SEV specific routines in AmdSev.c Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 11/29] OvmfPkg/SecMain: register GHCB gpa for the SEV-SNP guest Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 12/29] OvmfPkg/VmgExitLib: use SEV-SNP-validated CPUID values Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 13/29] OvmfPkg/PlatformPei: register GHCB gpa for the SEV-SNP guest Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 14/29] OvmfPkg/AmdSevDxe: do not use extended PCI config space Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 15/29] OvmfPkg/MemEncryptSevLib: add support to validate system RAM Brijesh Singh
2021-09-02 9:50 ` Gerd Hoffmann
2021-09-02 13:34 ` Brijesh Singh
2021-09-03 7:04 ` Gerd Hoffmann
2021-09-01 16:16 ` [PATCH v6 16/29] OvmfPkg/BaseMemEncryptSevLib: skip the pre-validated " Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 17/29] OvmfPkg/MemEncryptSevLib: add support to validate > 4GB memory in PEI phase Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 18/29] OvmfPkg/SecMain: pre-validate the memory used for decompressing Fv Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 19/29] OvmfPkg/PlatformPei: validate the system RAM when SNP is active Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 20/29] OvmfPkg/PlatformPei: set the SEV-SNP enabled PCD Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 21/29] OvmfPkg/PlatformPei: set the Hypervisor Features PCD Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 22/29] MdePkg/GHCB: increase the GHCB protocol max version Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 23/29] UefiCpuPkg/MpLib: add support to register GHCB GPA when SEV-SNP is enabled Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 24/29] UefiCpuPkg/MpInitLib: use BSP to do extended topology check Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 25/29] OvmfPkg/MemEncryptSevLib: change the page state in the RMP table Brijesh Singh
2021-09-01 16:16 ` Brijesh Singh [this message]
2021-09-01 16:16 ` [PATCH v6 27/29] OvmfPkg/PlatformPei: mark cpuid and secrets memory reserved in EFI map Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 28/29] OvmfPkg/AmdSev: expose the SNP reserved pages through configuration table Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 29/29] UefiCpuPkg/MpInitLib: Use SEV-SNP AP Creation NAE event to launch APs Brijesh Singh
2021-09-07 2:36 ` [PATCH v6 00/29] Add AMD Secure Nested Paging (SEV-SNP) support Yao, Jiewen
2021-09-08 2:29 ` Min Xu
2021-09-08 6:03 ` Yao, Jiewen
2021-09-08 19:45 ` Brijesh Singh
2021-09-09 0:31 ` Min Xu
2021-09-09 10:51 ` Brijesh Singh
2021-09-09 11:22 ` Gerd Hoffmann
2021-09-09 11:40 ` Brijesh Singh
2021-09-09 11:45 ` [edk2-devel] " Min Xu
2021-09-09 11:55 ` Yao, Jiewen
2021-09-12 22:55 ` Brijesh Singh
2021-09-13 0:33 ` Yao, Jiewen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210901161646.24763-27-brijesh.singh@amd.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox