From: "Brijesh Singh" <brijesh.singh@amd.com>
To: devel@edk2.groups.io
Cc: James Bottomley <jejb@linux.ibm.com>, Min Xu <min.m.xu@intel.com>,
Jiewen Yao <jiewen.yao@intel.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
Jordan Justen <jordan.l.justen@intel.com>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Erdem Aktas <erdemaktas@google.com>,
Michael Roth <Michael.Roth@amd.com>,
Gerd Hoffmann <kraxel@redhat.com>,
Brijesh Singh <brijesh.singh@amd.com>,
Michael Roth <michael.roth@amd.com>
Subject: [PATCH v6 06/29] OvmfPkg/ResetVector: pre-validate the data pages used in SEC phase
Date: Wed, 1 Sep 2021 11:16:23 -0500 [thread overview]
Message-ID: <20210901161646.24763-7-brijesh.singh@amd.com> (raw)
In-Reply-To: <20210901161646.24763-1-brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
An SEV-SNP guest requires that private memory (aka pages mapped encrypted)
must be validated before being accessed.
The validation process consist of the following sequence:
1) Set the memory encryption attribute in the page table (aka C-bit).
Note: If the processor is in non-PAE mode, then all the memory accesses
are considered private.
2) Add the memory range as private in the RMP table. This can be performed
using the Page State Change VMGEXIT defined in the GHCB specification.
3) Use the PVALIDATE instruction to set the Validated Bit in the RMP table.
During the guest creation time, the VMM encrypts the OVMF_CODE.fd using
the SEV-SNP firmware provided LAUNCH_UPDATE_DATA command. In addition to
encrypting the content, the command also validates the memory region.
This allows us to execute the code without going through the validation
sequence.
During execution, the reset vector need to access some data pages
(such as page tables, SevESWorkarea, Sec stack). The data pages are
accessed as private memory. The data pages are not part of the
OVMF_CODE.fd, so they were not validated during the guest creation.
There are two approaches we can take to validate the data pages before
the access:
a) Enhance the OVMF reset vector code to validate the pages as described
above (go through step 2 - 3).
OR
b) Validate the pages during the guest creation time. The SEV firmware
provides a command which can be used by the VMM to validate the pages
without affecting the measurement of the launch.
Approach #b seems much simpler; it does not require any changes to the
OVMF reset vector code.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
---
OvmfPkg/OvmfPkg.dec | 5 +++++
OvmfPkg/OvmfPkgX64.fdf | 6 ++++--
OvmfPkg/ResetVector/ResetVector.inf | 2 ++
OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 5 +++++
OvmfPkg/ResetVector/ResetVector.nasmb | 2 ++
5 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
index afe9b7135560..41fffd6d3bd9 100644
--- a/OvmfPkg/OvmfPkg.dec
+++ b/OvmfPkg/OvmfPkg.dec
@@ -353,6 +353,11 @@ [PcdsFixedAtBuild]
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpCpuidBase|0|UINT32|0x54
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpCpuidSize|0|UINT32|0x55
+ ## The start and end of pre-validated memory region by the hypervisor
+ # through the SEV-SNP firmware.
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpHypervisorPreValidatedStart|0x0|UINT32|0x56
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpHypervisorPreValidatedEnd|0x0|UINT32|0x57
+
[PcdsDynamic, PcdsDynamicEx]
gUefiOvmfPkgTokenSpaceGuid.PcdEmuVariableEvent|0|UINT64|2
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashVariablesEnable|FALSE|BOOLEAN|0x10
diff --git a/OvmfPkg/OvmfPkgX64.fdf b/OvmfPkg/OvmfPkgX64.fdf
index 1e292d11ace3..10e8ba758a29 100644
--- a/OvmfPkg/OvmfPkgX64.fdf
+++ b/OvmfPkg/OvmfPkgX64.fdf
@@ -110,9 +110,11 @@ [FD.MEMFD]
#
SET gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase = $(MEMFD_BASE_ADDRESS) + gUefiOvmfPkgTokenSpaceGuid.PcdOvmfWorkAreaBase + gUefiOvmfPkgTokenSpaceGuid.PcdOvmfConfidentialComputingWorkAreaHeader
SET gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaSize = gUefiOvmfPkgTokenSpaceGuid.PcdOvmfWorkAreaSize - gUefiOvmfPkgTokenSpaceGuid.PcdOvmfConfidentialComputingWorkAreaHeader
-##########################################################################################
-################################################################################
+# The range of the pages pre-validated through the SEV-SNP firmware.
+SET gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpHypervisorPreValidatedStart = $(MEMFD_BASE_ADDRESS) + gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesBase
+SET gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpHypervisorPreValidatedEnd = $(MEMFD_BASE_ADDRESS) + gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvBase
+##########################################################################################
[FV.SECFV]
FvNameGuid = 763BED0D-DE9F-48F5-81F1-3E90E1B1A015
diff --git a/OvmfPkg/ResetVector/ResetVector.inf b/OvmfPkg/ResetVector/ResetVector.inf
index 34d843de62c4..307699d8bf22 100644
--- a/OvmfPkg/ResetVector/ResetVector.inf
+++ b/OvmfPkg/ResetVector/ResetVector.inf
@@ -54,3 +54,5 @@ [FixedPcd]
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpSecretsSize
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpCpuidBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpCpuidSize
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpHypervisorPreValidatedStart
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpHypervisorPreValidatedEnd
diff --git a/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
index 71e1484cf4e4..a45e828a04a5 100644
--- a/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
+++ b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
@@ -57,9 +57,14 @@ guidedStructureStart:
; SEV-SNP boot block GUID and provide the GPA to the PSP to populate
; the memory area with the required information..
;
+; In order to boot the SEV-SNP guest the hypervisor must pre-validated the
+; memory range from SNP_HV_VALIDATED_START to SNP_HV_VALIDATED_END.
+;
; GUID (SEV-SNP boot block): bd39c0c2-2f8e-4243-83e8-1b74cebcb7d9
;
sevSnpBootBlockStart:
+ DD SNP_HV_VALIDATED_START
+ DD SNP_HV_VALIDATED_END
DD SNP_SECRETS_BASE
DD SNP_SECRETS_SIZE
DD SNP_CPUID_BASE
diff --git a/OvmfPkg/ResetVector/ResetVector.nasmb b/OvmfPkg/ResetVector/ResetVector.nasmb
index 9be963206989..75a38697d5d8 100644
--- a/OvmfPkg/ResetVector/ResetVector.nasmb
+++ b/OvmfPkg/ResetVector/ResetVector.nasmb
@@ -81,6 +81,8 @@
%define SNP_CPUID_SIZE FixedPcdGet32 (PcdOvmfSnpCpuidSize)
%define SNP_SECRETS_BASE FixedPcdGet32 (PcdOvmfSnpSecretsBase)
%define SNP_SECRETS_SIZE FixedPcdGet32 (PcdOvmfSnpSecretsSize)
+ %define SNP_HV_VALIDATED_START FixedPcdGet32 (PcdOvmfSnpHypervisorPreValidatedStart)
+ %define SNP_HV_VALIDATED_END FixedPcdGet32 (PcdOvmfSnpHypervisorPreValidatedEnd)
%include "Ia32/Flat32ToFlat64.asm"
%include "Ia32/AmdSev.asm"
%include "Ia32/PageTables64.asm"
--
2.17.1
next prev parent reply other threads:[~2021-09-01 16:17 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-01 16:16 [PATCH v6 00/29] Add AMD Secure Nested Paging (SEV-SNP) support Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 01/29] OvmfPkg: reserve SNP secrets page Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 02/29] OvmfPkg: reserve CPUID page for SEV-SNP Brijesh Singh
2021-09-02 8:04 ` Gerd Hoffmann
2021-09-02 12:28 ` Brijesh Singh
2021-09-02 21:17 ` Brijesh Singh
2021-09-03 6:28 ` Gerd Hoffmann
2021-09-03 11:56 ` [edk2-devel] " Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 03/29] OvmfPkg/ResetVector: introduce SEV-SNP boot block GUID Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 04/29] OvmfPkg/ResetVector: invalidate the GHCB page Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 05/29] OvmfPkg/ResetVector: check the vmpl level Brijesh Singh
2021-09-01 16:16 ` Brijesh Singh [this message]
2021-09-02 8:20 ` [PATCH v6 06/29] OvmfPkg/ResetVector: pre-validate the data pages used in SEC phase Gerd Hoffmann
2021-09-06 1:10 ` [edk2-devel] " Min Xu
2021-09-06 12:16 ` Gerd Hoffmann
2021-09-06 13:19 ` Min Xu
2021-09-07 7:07 ` Gerd Hoffmann
2021-09-07 13:27 ` Brijesh Singh
2021-09-08 6:36 ` Min Xu
2021-09-14 3:49 ` Yao, Jiewen
2021-09-16 7:42 ` Gerd Hoffmann
2021-09-01 16:16 ` [PATCH v6 07/29] OvmfPkg/ResetVector: use SEV-SNP-validated CPUID values Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 08/29] UefiCpuPkg: Define the SEV-SNP specific dynamic PCDs Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 09/29] OvmfPkg/MemEncryptSevLib: add MemEncryptSevSnpEnabled() Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 10/29] OvmfPkg/SecMain: move SEV specific routines in AmdSev.c Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 11/29] OvmfPkg/SecMain: register GHCB gpa for the SEV-SNP guest Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 12/29] OvmfPkg/VmgExitLib: use SEV-SNP-validated CPUID values Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 13/29] OvmfPkg/PlatformPei: register GHCB gpa for the SEV-SNP guest Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 14/29] OvmfPkg/AmdSevDxe: do not use extended PCI config space Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 15/29] OvmfPkg/MemEncryptSevLib: add support to validate system RAM Brijesh Singh
2021-09-02 9:50 ` Gerd Hoffmann
2021-09-02 13:34 ` Brijesh Singh
2021-09-03 7:04 ` Gerd Hoffmann
2021-09-01 16:16 ` [PATCH v6 16/29] OvmfPkg/BaseMemEncryptSevLib: skip the pre-validated " Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 17/29] OvmfPkg/MemEncryptSevLib: add support to validate > 4GB memory in PEI phase Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 18/29] OvmfPkg/SecMain: pre-validate the memory used for decompressing Fv Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 19/29] OvmfPkg/PlatformPei: validate the system RAM when SNP is active Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 20/29] OvmfPkg/PlatformPei: set the SEV-SNP enabled PCD Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 21/29] OvmfPkg/PlatformPei: set the Hypervisor Features PCD Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 22/29] MdePkg/GHCB: increase the GHCB protocol max version Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 23/29] UefiCpuPkg/MpLib: add support to register GHCB GPA when SEV-SNP is enabled Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 24/29] UefiCpuPkg/MpInitLib: use BSP to do extended topology check Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 25/29] OvmfPkg/MemEncryptSevLib: change the page state in the RMP table Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 26/29] OvmfPkg/MemEncryptSevLib: skip page state change for Mmio address Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 27/29] OvmfPkg/PlatformPei: mark cpuid and secrets memory reserved in EFI map Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 28/29] OvmfPkg/AmdSev: expose the SNP reserved pages through configuration table Brijesh Singh
2021-09-01 16:16 ` [PATCH v6 29/29] UefiCpuPkg/MpInitLib: Use SEV-SNP AP Creation NAE event to launch APs Brijesh Singh
2021-09-07 2:36 ` [PATCH v6 00/29] Add AMD Secure Nested Paging (SEV-SNP) support Yao, Jiewen
2021-09-08 2:29 ` Min Xu
2021-09-08 6:03 ` Yao, Jiewen
2021-09-08 19:45 ` Brijesh Singh
2021-09-09 0:31 ` Min Xu
2021-09-09 10:51 ` Brijesh Singh
2021-09-09 11:22 ` Gerd Hoffmann
2021-09-09 11:40 ` Brijesh Singh
2021-09-09 11:45 ` [edk2-devel] " Min Xu
2021-09-09 11:55 ` Yao, Jiewen
2021-09-12 22:55 ` Brijesh Singh
2021-09-13 0:33 ` Yao, Jiewen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210901161646.24763-7-brijesh.singh@amd.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox