[edk2-platforms PATCH 1/4] BeagleBoardPkg: Remove the configuration and image headers from flash

["Rebecca Cran" <rebecca@bsdio.com>]

Remove the configuration and image headers from the flash image.
This was likely intended for the UEFI firmware to be loaded by the ROM
code, but the BeagleBoard only has 64KB SRAM and so EDK2 needs to be
executed as a second stage loader.

Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
---
 Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf b/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf
index a2cfeb3bc27b..dbae015ff382 100644
--- a/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf
+++ b/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf
@@ -23,7 +23,7 @@
 
 
 [FD.BeagleBoard_EFI]
-BaseAddress   = 0x80007DF8|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of the FLASH Device.
+BaseAddress   = 0x80008000|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of the FLASH Device.
 Size          = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize         #The size in bytes of the FLASH Device
 ErasePolarity = 1
 BlockSize     = 0x1
@@ -44,16 +44,7 @@ NumBlocks     = 0xB0000
 # RegionType <FV, DATA, or FILE>
 #
 ################################################################################
-0x00000000|0x00000200
-FILE = Platform/BeagleBoard/BeagleBoardPkg/ConfigurationHeader.bin
-
-0x00000200|0x00000008
-DATA = {
-  0xF8, 0xFD, 0x0A, 0x00,   # image size:   0xB0000 - 0x208 == 0xAFDF8
-  0x00, 0x80, 0x00, 0x80    # entry point:  0x80008000
-}
-
-0x00000208|0x000AFDF8
+0x00000000|0x000B0000
 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
 FV = FVMAIN_COMPACT
 
-- 
2.31.1