From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from NAM10-MW2-obe.outbound.protection.outlook.com (NAM10-MW2-obe.outbound.protection.outlook.com [40.107.94.103]) by mx.groups.io with SMTP id smtpd.web09.9885.1631721618065960246 for ; Wed, 15 Sep 2021 09:00:18 -0700 Authentication-Results: mx.groups.io; dkim=fail reason="body hash did not verify" header.i=@os.amperecomputing.com header.s=selector2 header.b=duHfDcmx; spf=pass (domain: os.amperecomputing.com, ip: 40.107.94.103, mailfrom: nhi@os.amperecomputing.com) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=RbQHR0PPw27wOFHyevr8dV3jOYEiCTXyitVNxzbEBgmo5T2p0tQ6o2V5WxPgtlpe/GgEtCA5KQebE3eXdBQOIAJiYPrdx/4J/4np970kF3ncbaOYRy4r6IaGD+49QljrbxPihnelHQye9lrQgMLOU7Uv7qp1z9HKBdNkIC7Y7J/MKy2fIaMg3qpmhFnQYj0SoBb1C/9yeUoSc6/f2DyrlTDbbQPHvMOuhgEIFRgR1nrhph0mCb8f5pMB/5HWCB6M+u2ggreM1JRNatpnj4ELM8r3S3Fxj81CX42X7vxvUhBadxLucfh3/Zen4OEY1NAKv1iExstIRGdyg/32c53W3Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version; bh=K1hwPhHx7Xbmim6fvEeu79FICzH2MwDINnAzX0Zto5Q=; b=hfNxMPqroHBy+u1/YLZbvStDocEYNTrpyBX3bjJj//T2WD1haKahI5m5iLaGl9ATvWdTCQZQd2F9Leuu/oPa1FsCp8jq+fIMx4BFhPYQpiap8F2l6f3l8CW4crz8NhftfC93CILveAkTedcfjB2KtMEF3JGw6uR3JTRqRYOIfJTdytEiQa07iAc4QJYHZwS51oWP/S1weWLfXRWUzgC6F727DVHjBgNJzmuAW02HkQexLFht0qpxAagOkxmQIPQ1w1iaML61X0qQu0IGbT3zeFBmL99gSM/3pubCVJCZ6aXVi14VEsRXFOSZVigeW9Jx9hJ7sQR1RbEbPJ+HV9/HRA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=os.amperecomputing.com; dmarc=pass action=none header.from=os.amperecomputing.com; dkim=pass header.d=os.amperecomputing.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=os.amperecomputing.com; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=K1hwPhHx7Xbmim6fvEeu79FICzH2MwDINnAzX0Zto5Q=; b=duHfDcmxCFv3eG14RBGevuSd9E8Rdmyaofq35+iUwhsIQo+4PkxcHxe/V6LVjF98puvixJdc8RWf9/+lmzyDegiKRDCZFm/GuXgiYB6GiCaul7N7jtzUuSoK8v4NkZJXjjVpXJG9Wth0YaWRFmPf/KLNTEaI7j6NevW3yETIubs= Authentication-Results: edk2.groups.io; dkim=none (message not signed) header.d=none;edk2.groups.io; dmarc=none action=none header.from=os.amperecomputing.com; Received: from DM6PR01MB5849.prod.exchangelabs.com (2603:10b6:5:205::20) by DM5PR0101MB3065.prod.exchangelabs.com (2603:10b6:4:33::16) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4500.15; Wed, 15 Sep 2021 16:00:08 +0000 Received: from DM6PR01MB5849.prod.exchangelabs.com ([fe80::8eb:704f:2ba7:9bc3]) by DM6PR01MB5849.prod.exchangelabs.com ([fe80::8eb:704f:2ba7:9bc3%4]) with mapi id 15.20.4523.014; Wed, 15 Sep 2021 16:00:08 +0000 From: "Nhi Pham" To: devel@edk2.groups.io CC: patches@amperecomputing.com, nhi@os.amperecomputing.com, vunguyen@os.amperecomputing.com, Thang Nguyen , Chuong Tran , Phong Vo , Leif Lindholm , Michael D Kinney , Ard Biesheuvel , Nate DeSimone Subject: [PATCH v3 15/28] Ampere: PCIe: Add PciSegmentLib library instance Date: Wed, 15 Sep 2021 22:55:14 +0700 Message-ID: <20210915155527.8176-16-nhi@os.amperecomputing.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20210915155527.8176-1-nhi@os.amperecomputing.com> References: <20210915155527.8176-1-nhi@os.amperecomputing.com> X-ClientProxiedBy: HK2PR0302CA0012.apcprd03.prod.outlook.com (2603:1096:202::22) To DM6PR01MB5849.prod.exchangelabs.com (2603:10b6:5:205::20) Return-Path: nhi@os.amperecomputing.com MIME-Version: 1.0 Received: from sw004.amperecomputing.com (118.69.219.201) by HK2PR0302CA0012.apcprd03.prod.outlook.com (2603:1096:202::22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4544.5 via Frontend Transport; Wed, 15 Sep 2021 16:00:04 +0000 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: 19c01780-46fe-4b0b-9680-08d97861e3a3 X-MS-TrafficTypeDiagnostic: DM5PR0101MB3065: X-MS-Exchange-Transport-Forked: True X-Microsoft-Antispam-PRVS: X-MS-Oob-TLC-OOBClassifiers: OLM:10000; X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:DM6PR01MB5849.prod.exchangelabs.com;PTR:;CAT:NONE;SFS:(4636009)(136003)(346002)(396003)(366004)(376002)(39850400004)(2616005)(38100700002)(38350700002)(2906002)(6666004)(6916009)(83380400001)(30864003)(6512007)(26005)(8676002)(4326008)(186003)(19627235002)(8936002)(478600001)(6506007)(5660300002)(52116002)(1076003)(86362001)(316002)(66556008)(54906003)(956004)(6486002)(66476007)(66946007)(579004);DIR:OUT;SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: =?us-ascii?Q?MeCnwBYYVqjegBZ5i6te9h5IMPpt0VgriP2SGh8Uq+C7sVMTSw177V9Qs1md?= =?us-ascii?Q?pFIq4J1ije2MGBqS3YmuNuNcTGG7FMhxMqOGQk+QzJrb93609MBPBxQ3Hp/G?= =?us-ascii?Q?J6WTRGTobYd0ly8ZxrHMcWjx0FIm9lAXu90YRa/tZbRfcB2a+FoBSNQ95yaB?= =?us-ascii?Q?Rte0FZ+LTaK2vMBD8PnU+HAXifddqwKaBMKBLibez6lzDYcm/yhpzYS+6R7f?= =?us-ascii?Q?9jgoSeNOOLzBgz4TnR2OVJPkcHKSP1vliiDPnhAY6C50+Tf95vTvFfOEcRgS?= =?us-ascii?Q?yFB2m34be+XqGXicKHm4hFb6Ys6Oo358UebEBgvQysx0ldi/J4FYmVGO6bQ3?= =?us-ascii?Q?WrajlFh5sjYZ0A7iLvuCQVreu5bsJU5yRKiCi4tn6E+u6NgWuDvmOQVBDK2U?= =?us-ascii?Q?DbhB6U8Gme707WXCmcs9T/00qyJH9ky8SxFSy/iIpR27lh5Us6OfkBGWlSFm?= =?us-ascii?Q?p5kv3/PGNknlkMYmpG7VU/F7POEI4ZuiHj2LCI5YphSOt8g+M8BWDM1gmVbH?= =?us-ascii?Q?Q+QN9kiHR7WGadvCw4mvEKFFnFAZyyPVhNPJzAf9LUrxQvLMAlJz46063crV?= =?us-ascii?Q?q3oO6nt5hpsGQNsKx1kWQ3B2JcgVTIwSM04XC/E4dQ3diqV0VllqrqV1I+/d?= =?us-ascii?Q?phHklyNhUlsy/k4mPeFwsFzSa86UEh07JABbNN+Fe/8N3tZJsXPiFWlwWr8A?= =?us-ascii?Q?lKyRfABunMKMfPIgeHK5mTcXEsUU0IQsAYxcN/hJJcU+ci3jmnmYsBOyifjq?= =?us-ascii?Q?66j3zQCzUp/NIPzApvrbTTXe3fMEw601V9Yu8uzOLrjzbD57mQCn0Rn73o47?= =?us-ascii?Q?TK8BAPhDjMsZAsv8Mq4KKRytgTB3JzxBghDomznGoZ4Nkert2NNQOP0J91dP?= =?us-ascii?Q?nsjSVyFSOZGLY8GY7uFh9SM3Qb8FRNozjzbCbb3weYWL7wmUGzbA6e6xBS2Q?= =?us-ascii?Q?xfrSThAXqT651jO3yOGi+PgrCY5dED5pMQH9G0WG+XUdINXELBXHR5tcc0gU?= =?us-ascii?Q?TNf35Kg8TDNYD2CuI+BLxnYnkaUAWhLIPaCRKJm02A4AQ0CcVYbqBENNNQE9?= =?us-ascii?Q?tRbEbgoXBxkoadhOzUr0lTD0ai8eBVo66iQmxOKa2JFaWRs0jSoG8hg7lsmq?= =?us-ascii?Q?XlakBBJ8QAHxNKuZo4fV6QTY7ueEp+rM/DuAonrMyccZPtV1fELNWhtSGw4d?= =?us-ascii?Q?x71meuJD0IK1/e0uKBs1PkM3In1/FNIUuqHO2zKa5zzm5Q0Yyit+aBRoS8Sq?= =?us-ascii?Q?99EtWktd/EPOduIIrVXgCUwBXPF0pjDKakRxYaNqlFFeUafWKAsnmqYIsVls?= =?us-ascii?Q?9fZHG6byQgtn+sD8vqGSvVUE?= X-OriginatorOrg: os.amperecomputing.com X-MS-Exchange-CrossTenant-Network-Message-Id: 19c01780-46fe-4b0b-9680-08d97861e3a3 X-MS-Exchange-CrossTenant-AuthSource: DM6PR01MB5849.prod.exchangelabs.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 15 Sep 2021 16:00:07.9783 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 3bc2b170-fd94-476d-b0ce-4229bdc904a7 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: d+pqZtw9vjQqvoGsxRPN9Fz1R9xZni+4KuzUFp0m7QBGKT5zBqHfCbUO8FW3yxxXBtxR3/1nsTFPxXNh4OpQL3t1ObntgfbropbgZTdW/20= X-MS-Exchange-Transport-CrossTenantHeadersStamped: DM5PR0101MB3065 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain From: Vu Nguyen Provides wrapper calls to the Ac01PcieLib to handle the PCIe access. As Ampere Altra processor supports upto 16 PCIe Root Complexs, the target Root Complex will depend on the segment number parsed from the input address. Cc: Thang Nguyen Cc: Chuong Tran Cc: Phong Vo Cc: Leif Lindholm Cc: Michael D Kinney Cc: Ard Biesheuvel Cc: Nate DeSimone Signed-off-by: Vu Nguyen --- Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dsc.inc = | 1 + Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLibPci.in= f | 28 + Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLib.c = | 1189 ++++++++++++++++++++ 3 files changed, 1218 insertions(+) diff --git a/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dsc.inc b/Silicon= /Ampere/AmpereAltraPkg/AmpereAltraPkg.dsc.inc index dc66b711aba8..dbcd1c9acaa2 100644 --- a/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dsc.inc +++ b/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dsc.inc @@ -229,6 +229,7 @@ [LibraryClasses.common.DXE_DRIVER] MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAll= ocationLib.inf FlashLib|Silicon/Ampere/AmpereAltraPkg/Library/FlashLib/FlashLib.inf PciHostBridgeLib|Silicon/Ampere/AmpereAltraPkg/Library/PciHostBridgeLib/= PciHostBridgeLib.inf + PciSegmentLib|Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/Pci= SegmentLibPci.inf =20 [LibraryClasses.common.UEFI_APPLICATION] UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiTianoCust= omDecompressLib.inf diff --git a/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegm= entLibPci.inf b/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciS= egmentLibPci.inf new file mode 100644 index 000000000000..64897653e126 --- /dev/null +++ b/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLibP= ci.inf @@ -0,0 +1,28 @@ +## @file +# +# Copyright (c) 2021, Ampere Computing LLC. All rights reserved.
+# +# SPDX-License-Identifier: BSD-2-Clause-Patent +# +## + +[Defines] + INF_VERSION =3D 0x0001001B + BASE_NAME =3D PciSegmentLibPci + FILE_GUID =3D 0AF5E76D-D31E-492B-AE69-A7B441FF62D9 + MODULE_TYPE =3D BASE + VERSION_STRING =3D 1.0 + LIBRARY_CLASS =3D PciSegmentLib + +[Sources] + PciSegmentLib.c + +[Packages] + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec + Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec + +[LibraryClasses] + Ac01PcieLib + BaseLib + DebugLib diff --git a/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegm= entLib.c b/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmen= tLib.c new file mode 100644 index 000000000000..c893c56dfadf --- /dev/null +++ b/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLib.= c @@ -0,0 +1,1189 @@ +/** @file + + Copyright (c) 2021, Ampere Computing LLC. All rights reserved.
+ + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#include + +#include +#include +#include +#include +#include +#include + +#include + +/** + Assert the validity of a PCI Segment address. + A valid PCI Segment address should not contain 1's in bits 28..31 and 48= ..63 + and the segment should be 0. + + @param A The address to validate. + @param M Additional bits to assert to be zero. + +**/ +#define ASSERT_INVALID_PCI_SEGMENT_ADDRESS(A,M) \ + ASSERT (((A) & (0xffff0000f0000000ULL | (M))) =3D=3D 0) + +/** + Convert the PCI Segment library address to PCI library address. + + @param A The address to convert. +**/ +#define PCI_SEGMENT_TO_PCI_ADDRESS(A) ((UINTN)(UINT32)A) + +/** + Register a PCI device so PCI configuration registers may be accessed aft= er + SetVirtualAddressMap(). + + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function a= nd + Register. + + @retval RETURN_SUCCESS The PCI device was registered for runti= me access. + @retval RETURN_UNSUPPORTED An attempt was made to call this functi= on + after ExitBootServices(). + @retval RETURN_UNSUPPORTED The resources required to access the PC= I device + at runtime could not be mapped. + @retval RETURN_OUT_OF_RESOURCES There are not enough resources availabl= e to + complete the registration. + +**/ +RETURN_STATUS +EFIAPI +PciSegmentRegisterForRuntimeAccess ( + IN UINTN Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0); + return PciRegisterForRuntimeAccess (PCI_SEGMENT_TO_PCI_ADDRESS (Address)= ); +} + +/** + Reads an 8-bit PCI configuration register. + + Reads and returns the 8-bit PCI configuration register specified by Addr= ess. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + + @return The 8-bit PCI configuration register specified by Address. + +**/ +UINT8 +EFIAPI +PciSegmentRead8 ( + IN UINT64 Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0); + + return PciRead8 (PCI_SEGMENT_TO_PCI_ADDRESS (Address)); +} + +/** + Writes an 8-bit PCI configuration register. + + Writes the 8-bit PCI configuration register specified by Address with th= e value specified by Value. + Value is returned. This function must guarantee that all PCI read and w= rite operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, F= unction, and Register. + @param Value The value to write. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentWrite8 ( + IN UINT64 Address, + IN UINT8 Value + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0); + + return PciWrite8 (PCI_SEGMENT_TO_PCI_ADDRESS (Address), Value); +} + +/** + Performs a bitwise OR of an 8-bit PCI configuration register with an 8-b= it value. + + Reads the 8-bit PCI configuration register specified by Address, + performs a bitwise OR between the read result and the value specified by= OrData, + and writes the result to the 8-bit PCI configuration register specified = by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentOr8 ( + IN UINT64 Address, + IN UINT8 OrData + ) +{ + return PciWrite8 (PCI_SEGMENT_TO_PCI_ADDRESS (Address), (UINT8)(PciSegme= ntRead8 (Address) | OrData)); +} + +/** + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-= bit value. + + Reads the 8-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + and writes the result to the 8-bit PCI configuration register specified = by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + If any reserved bits in Address are set, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentAnd8 ( + IN UINT64 Address, + IN UINT8 AndData + ) +{ + return PciSegmentWrite8 (Address, (UINT8)(PciSegmentRead8 (Address) & An= dData)); +} + +/** + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-= bit value, + followed a bitwise OR with another 8-bit value. + + Reads the 8-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + performs a bitwise OR between the result of the AND operation and the va= lue specified by OrData, + and writes the result to the 8-bit PCI configuration register specified = by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentAndThenOr8 ( + IN UINT64 Address, + IN UINT8 AndData, + IN UINT8 OrData + ) +{ + return PciSegmentWrite8 (Address, (UINT8)((PciSegmentRead8 (Address) & A= ndData) | OrData)); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in an 8-bit PCI configuration register. The bit fiel= d is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..7. + + @return The value of the bit field read from the PCI configuration regis= ter. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldRead8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead8 (PciSegmentRead8 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of t= he + 8-bit register is returned. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit an= d EndBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..7. + @param Value New value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldWrite8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 Value + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldWrite8 (PciSegmentRead8 (Address), StartBit, EndBit, Va= lue) + ); +} + +/** + Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, = and + writes the result back to the bit field in the 8-bit port. + + Reads the 8-bit PCI configuration register specified by Address, perform= s a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 8-bit PCI configuration register + specified by Address. The value written to the PCI configuration registe= r is + returned. This function must guarantee that all PCI read and write opera= tions + are serialized. Extra left bits in OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..7. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldOr8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 OrData + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldOr8 (PciSegmentRead8 (Address), StartBit, EndBit, OrDat= a) + ); +} + +/** + Reads a bit field in an 8-bit PCI configuration register, performs a bit= wise + AND, and writes the result back to the bit field in the 8-bit register. + + Reads the 8-bit PCI configuration register specified by Address, perform= s a + bitwise AND between the read result and the value specified by AndData, = and + writes the result to the 8-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned= . + This function must guarantee that all PCI read and write operations are + serialized. Extra left bits in AndData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..7. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldAnd8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldAnd8 (PciSegmentRead8 (Address), StartBit, EndBit, AndD= ata) + ); +} + +/** + Reads a bit field in an 8-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the 8-bit por= t. + + Reads the 8-bit PCI configuration register specified by Address, perform= s a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 8-bit PCI + configuration register specified by Address. The value written to the PC= I + configuration register is returned. This function must guarantee that al= l PCI + read and write operations are serialized. Extra left bits in both AndDat= a and + OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..7. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldAndThenOr8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData, + IN UINT8 OrData + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldAndThenOr8 (PciSegmentRead8 (Address), StartBit, EndBit= , AndData, OrData) + ); +} + +/** + Reads a 16-bit PCI configuration register. + + Reads and returns the 16-bit PCI configuration register specified by Add= ress. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + + @return The 16-bit PCI configuration register specified by Address. + +**/ +UINT16 +EFIAPI +PciSegmentRead16 ( + IN UINT64 Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1); + + return PciRead16 (PCI_SEGMENT_TO_PCI_ADDRESS (Address)); +} + +/** + Writes a 16-bit PCI configuration register. + + Writes the 16-bit PCI configuration register specified by Address with t= he value specified by Value. + Value is returned. This function must guarantee that all PCI read and w= rite operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, F= unction, and Register. + @param Value The value to write. + + @return The parameter of Value. + +**/ +UINT16 +EFIAPI +PciSegmentWrite16 ( + IN UINT64 Address, + IN UINT16 Value + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1); + + return PciWrite16 (PCI_SEGMENT_TO_PCI_ADDRESS (Address), Value); +} + +/** + Performs a bitwise OR of a 16-bit PCI configuration register with + a 16-bit value. + + Reads the 16-bit PCI configuration register specified by Address, perfor= ms a + bitwise OR between the read result and the value specified by OrData, an= d + writes the result to the 16-bit PCI configuration register specified by = Address. + The value written to the PCI configuration register is returned. This fu= nction + must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Funct= ion and + Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentOr16 ( + IN UINT64 Address, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) = | OrData)); +} + +/** + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-= bit value. + + Reads the 16-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + and writes the result to the 16-bit PCI configuration register specified= by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentAnd16 ( + IN UINT64 Address, + IN UINT16 AndData + ) +{ + return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) = & AndData)); +} + +/** + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-= bit value, + followed a bitwise OR with another 16-bit value. + + Reads the 16-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + performs a bitwise OR between the result of the AND operation and the va= lue specified by OrData, + and writes the result to the 16-bit PCI configuration register specified= by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentAndThenOr16 ( + IN UINT64 Address, + IN UINT16 AndData, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 (Address, (UINT16) ((PciSegmentRead16 (Address)= & AndData) | OrData)); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in a 16-bit PCI configuration register. The bit fiel= d is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..15. + + @return The value of the bit field read from the PCI configuration regis= ter. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldRead16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead16 (PciSegmentRead16 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of t= he + 16-bit register is returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit an= d EndBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..15. + @param Value New value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldWrite16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 Value + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldWrite16 (PciSegmentRead16 (Address), StartBit, EndBit, = Value) + ); +} + +/** + Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, = writes + the result back to the bit field in the 16-bit port. + + Reads the 16-bit PCI configuration register specified by Address, perfor= ms a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 16-bit PCI configuration register + specified by Address. The value written to the PCI configuration registe= r is + returned. This function must guarantee that all PCI read and write opera= tions + are serialized. Extra left bits in OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..15. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldOr16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldOr16 (PciSegmentRead16 (Address), StartBit, EndBit, OrD= ata) + ); +} + +/** + Reads a bit field in a 16-bit PCI configuration register, performs a bit= wise + AND, writes the result back to the bit field in the 16-bit register. + + Reads the 16-bit PCI configuration register specified by Address, perfor= ms a + bitwise AND between the read result and the value specified by AndData, = and + writes the result to the 16-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned= . + This function must guarantee that all PCI read and write operations are + serialized. Extra left bits in AndData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..15. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldAnd16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldAnd16 (PciSegmentRead16 (Address), StartBit, EndBit, An= dData) + ); +} + +/** + Reads a bit field in a 16-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the + 16-bit port. + + Reads the 16-bit PCI configuration register specified by Address, perfor= ms a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 16-bit PCI + configuration register specified by Address. The value written to the PC= I + configuration register is returned. This function must guarantee that al= l PCI + read and write operations are serialized. Extra left bits in both AndDat= a and + OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..15. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldAndThenOr16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldAndThenOr16 (PciSegmentRead16 (Address), StartBit, EndB= it, AndData, OrData) + ); +} + +/** + Reads a 32-bit PCI configuration register. + + Reads and returns the 32-bit PCI configuration register specified by Add= ress. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + + @return The 32-bit PCI configuration register specified by Address. + +**/ +UINT32 +EFIAPI +PciSegmentRead32 ( + IN UINT64 Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3); + + return PciRead32 (PCI_SEGMENT_TO_PCI_ADDRESS (Address)); +} + +/** + Writes a 32-bit PCI configuration register. + + Writes the 32-bit PCI configuration register specified by Address with t= he value specified by Value. + Value is returned. This function must guarantee that all PCI read and w= rite operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, F= unction, and Register. + @param Value The value to write. + + @return The parameter of Value. + +**/ +UINT32 +EFIAPI +PciSegmentWrite32 ( + IN UINT64 Address, + IN UINT32 Value + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3); + + return PciWrite32 (PCI_SEGMENT_TO_PCI_ADDRESS (Address), Value); +} + +/** + Performs a bitwise OR of a 32-bit PCI configuration register with a 32-b= it value. + + Reads the 32-bit PCI configuration register specified by Address, + performs a bitwise OR between the read result and the value specified by= OrData, + and writes the result to the 32-bit PCI configuration register specified= by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentOr32 ( + IN UINT64 Address, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) | OrData); +} + +/** + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-= bit value. + + Reads the 32-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + and writes the result to the 32-bit PCI configuration register specified= by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentAnd32 ( + IN UINT64 Address, + IN UINT32 AndData + ) +{ + return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) & AndData)= ; +} + +/** + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-= bit value, + followed a bitwise OR with another 32-bit value. + + Reads the 32-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + performs a bitwise OR between the result of the AND operation and the va= lue specified by OrData, + and writes the result to the 32-bit PCI configuration register specified= by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentAndThenOr32 ( + IN UINT64 Address, + IN UINT32 AndData, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 (Address, (PciSegmentRead32 (Address) & AndData= ) | OrData); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in a 32-bit PCI configuration register. The bit fiel= d is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..31. + + @return The value of the bit field read from the PCI configuration regis= ter. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldRead32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead32 (PciSegmentRead32 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of t= he + 32-bit register is returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit an= d EndBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..31. + @param Value New value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldWrite32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 Value + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldWrite32 (PciSegmentRead32 (Address), StartBit, EndBit, = Value) + ); +} + +/** + Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, = and + writes the result back to the bit field in the 32-bit port. + + Reads the 32-bit PCI configuration register specified by Address, perfor= ms a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 32-bit PCI configuration register + specified by Address. The value written to the PCI configuration registe= r is + returned. This function must guarantee that all PCI read and write opera= tions + are serialized. Extra left bits in OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..31. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldOr32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldOr32 (PciSegmentRead32 (Address), StartBit, EndBit, OrD= ata) + ); +} + +/** + Reads a bit field in a 32-bit PCI configuration register, performs a bit= wise + AND, and writes the result back to the bit field in the 32-bit register. + + + Reads the 32-bit PCI configuration register specified by Address, perfor= ms a bitwise + AND between the read result and the value specified by AndData, and writ= es the result + to the 32-bit PCI configuration register specified by Address. The value= written to + the PCI configuration register is returned. This function must guarante= e that all PCI + read and write operations are serialized. Extra left bits in AndData ar= e stripped. + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + + @param Address Address that encodes the PCI Segment, Bus, Device, Fun= ction, and Register. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..31. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldAnd32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldAnd32 (PciSegmentRead32 (Address), StartBit, EndBit, An= dData) + ); +} + +/** + Reads a bit field in a 32-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the + 32-bit port. + + Reads the 32-bit PCI configuration register specified by Address, perfor= ms a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 32-bit PCI + configuration register specified by Address. The value written to the PC= I + configuration register is returned. This function must guarantee that al= l PCI + read and write operations are serialized. Extra left bits in both AndDat= a and + OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..31. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldAndThenOr32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldAndThenOr32 (PciSegmentRead32 (Address), StartBit, EndB= it, AndData, OrData) + ); +} + +/** + Reads a range of PCI configuration registers into a caller supplied buff= er. + + Reads the range of PCI configuration registers specified by StartAddress= and + Size into the buffer specified by Buffer. This function only allows the = PCI + configuration registers from a single PCI function to be read. Size is + returned. When possible 32-bit PCI configuration read cycles are used to= read + from StartAddress to StartAddress + Size. Due to alignment restrictions,= 8-bit + and 16-bit PCI configuration read cycles may be used at the beginning an= d the + end of the range. + + If any reserved bits in StartAddress are set, then ASSERT(). + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). + If Size > 0 and Buffer is NULL, then ASSERT(). + + @param StartAddress Starting address that encodes the PCI Segment, Bus= , Device, + Function and Register. + @param Size Size in bytes of the transfer. + @param Buffer Pointer to a buffer receiving the data read. + + @return Size + +**/ +UINTN +EFIAPI +PciSegmentReadBuffer ( + IN UINT64 StartAddress, + IN UINTN Size, + OUT VOID *Buffer + ) +{ + EFI_STATUS Status; + + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0); + ASSERT (((StartAddress & 0xFFF) + Size) <=3D SIZE_4KB); + + if (Size =3D=3D 0) { + return Size; + } + + ASSERT (Buffer !=3D NULL); + + Status =3D Ac01PcieConfigRW (NULL, StartAddress, FALSE, Size, Buffer); + ASSERT_EFI_ERROR (Status); + + return Size; +} + +/** + Copies the data in a caller supplied buffer to a specified range of PCI + configuration space. + + Writes the range of PCI configuration registers specified by StartAddres= s and + Size from the buffer specified by Buffer. This function only allows the = PCI + configuration registers from a single PCI function to be written. Size i= s + returned. When possible 32-bit PCI configuration write cycles are used t= o + write from StartAddress to StartAddress + Size. Due to alignment restric= tions, + 8-bit and 16-bit PCI configuration write cycles may be used at the begin= ning + and the end of the range. + + If any reserved bits in StartAddress are set, then ASSERT(). + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). + If Size > 0 and Buffer is NULL, then ASSERT(). + + @param StartAddress Starting address that encodes the PCI Segment, Bus= , Device, + Function and Register. + @param Size Size in bytes of the transfer. + @param Buffer Pointer to a buffer containing the data to write. + + @return The parameter of Size. + +**/ +UINTN +EFIAPI +PciSegmentWriteBuffer ( + IN UINT64 StartAddress, + IN UINTN Size, + IN VOID *Buffer + ) +{ + EFI_STATUS Status; + + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0); + ASSERT (((StartAddress & 0xFFF) + Size) <=3D SIZE_4KB); + + if (Size =3D=3D 0) { + return Size; + } + + ASSERT (Buffer !=3D NULL); + + Status =3D Ac01PcieConfigRW (NULL, StartAddress, TRUE, Size, Buffer); + ASSERT_EFI_ERROR (Status); + + return Size; +} --=20 2.17.1