From: "Daniel Schaefer" <daniel.schaefer@hpe.com>
To: <devel@edk2.groups.io>
Cc: Abner Chang <abner.chang@hpe.com>, Sunil V L <sunilvl@ventanamicro.com>
Subject: [edk2-platforms][PATCH v2 11/14] U5SeriesPkg: Switch to generic OpenSBI platform
Date: Wed, 6 Oct 2021 19:58:33 +0800 [thread overview]
Message-ID: <20211006115836.3641776-4-daniel.schaefer@hpe.com> (raw)
In-Reply-To: <20211006115836.3641776-1-daniel.schaefer@hpe.com>
New platform files require more space in SEC.
Behavior is determined not by source code but by device tree.
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Abner Chang <abner.chang@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Daniel Schaefer <daniel.schaefer@hpe.com>
---
Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.fdf.inc | 6 +-
Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/OpensbiPlatformLib.inf | 2 +
Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/Platform.c | 350 ++++++++++----------
Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/PlatformOverride.h | 27 ++
Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/SifiveFu540.c | 47 +++
Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/U540.fdf.inc | 6 +-
6 files changed, 261 insertions(+), 177 deletions(-)
diff --git a/Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.fdf.inc b/Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.fdf.inc
index 13c14a4a2c..e88aee8c02 100644
--- a/Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.fdf.inc
+++ b/Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.fdf.inc
@@ -23,10 +23,10 @@ DEFINE CODE_BLOCKS = 0x7E0
DEFINE VARS_BLOCKS = 0x20
DEFINE SECFV_OFFSET = 0x00000000
-DEFINE SECFV_SIZE = 0x00020000
-DEFINE PEIFV_OFFSET = 0x00020000
+DEFINE SECFV_SIZE = 0x00030000
+DEFINE PEIFV_OFFSET = 0x00030000
DEFINE PEIFV_SIZE = 0x00080000
-DEFINE SCRATCH_OFFSET = 0x000a0000
+DEFINE SCRATCH_OFFSET = 0x000b0000
DEFINE SCRATCH_SIZE = 0x00010000
DEFINE FVMAIN_OFFSET = 0x00100000 # Must be power of 2 for PMP setting
DEFINE FVMAIN_SIZE = 0x0018C000
diff --git a/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/OpensbiPlatformLib.inf b/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/OpensbiPlatformLib.inf
index 317aaceb25..f9f2073a5b 100644
--- a/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/OpensbiPlatformLib.inf
+++ b/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/OpensbiPlatformLib.inf
@@ -25,6 +25,8 @@
[Sources]
Platform.c
+ SifiveFu540.c
+ PlatformOverride.h
[Packages]
EmbeddedPkg/EmbeddedPkg.dec
diff --git a/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/Platform.c b/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/Platform.c
index aa6274be96..4deb048566 100644
--- a/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/Platform.c
+++ b/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/Platform.c
@@ -1,216 +1,224 @@
/*
- *
- * Copyright (c) 2020, Hewlett Packard Enterprise Development LP. All rights reserved.<BR>
- *
* SPDX-License-Identifier: BSD-2-Clause
*
- * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
*
* Authors:
- * Atish Patra <atish.patra@wdc.com>
+ * Anup Patel <anup.patel@wdc.com>
*/
#include <libfdt.h>
+#include <PlatformOverride.h>
#include <sbi/riscv_asm.h>
-#include <sbi/riscv_io.h>
-#include <sbi/riscv_encoding.h>
-#include <sbi/sbi_console.h>
-#include <sbi/sbi_const.h>
+#include <sbi/sbi_hartmask.h>
#include <sbi/sbi_platform.h>
+#include <sbi/sbi_string.h>
#include <sbi_utils/fdt/fdt_fixup.h>
-#include <sbi_utils/irqchip/plic.h>
-#include <sbi_utils/serial/sifive-uart.h>
-#include <sbi_utils/sys/clint.h>
-#include <U5Clint.h>
+#include <sbi_utils/fdt/fdt_helper.h>
+#include <sbi_utils/irqchip/fdt_irqchip.h>
+#include <sbi_utils/serial/fdt_serial.h>
+#include <sbi_utils/timer/fdt_timer.h>
+#include <sbi_utils/ipi/fdt_ipi.h>
+#include <sbi_utils/reset/fdt_reset.h>
-#define U540_HART_COUNT FixedPcdGet32(PcdHartCount)
-#define U540_BOOTABLE_HART_COUNT FixedPcdGet32(PcdBootableHartNumber)
-#define U540_HART_STACK_SIZE FixedPcdGet32(PcdOpenSbiStackSize)
-#define U540_BOOT_HART_ID FixedPcdGet32(PcdBootHartId)
+extern const struct platform_override sifive_fu540;
-#define U540_SYS_CLK FixedPcdGet32(PcdU5PlatformSystemClock)
+static const struct platform_override *special_platforms[] = {
+ &sifive_fu540,
+};
-#define U540_PLIC_ADDR 0xc000000
-#define U540_PLIC_NUM_SOURCES 0x35
-#define U540_PLIC_NUM_PRIORITIES 7
+static const struct platform_override *generic_plat = NULL;
+static const struct fdt_match *generic_plat_match = NULL;
-#define U540_UART_ADDR FixedPcdGet32(PcdU5UartBase)
+static void fw_platform_lookup_special(void *fdt, int root_offset)
+{
+ int pos, noff;
+ const struct platform_override *plat;
+ const struct fdt_match *match;
-#define U540_UART_BAUDRATE 115200
+ for (pos = 0; pos < array_size(special_platforms); pos++) {
+ plat = special_platforms[pos];
+ if (!plat->match_table)
+ continue;
-/* PRCI clock related macros */
-//TODO: Do we need a separate driver for this ?
-#define U540_PRCI_BASE_ADDR 0x10000000
-#define U540_PRCI_CLKMUXSTATUSREG 0x002C
-#define U540_PRCI_CLKMUX_STATUS_TLCLKSEL (0x1 << 1)
+ noff = fdt_find_match(fdt, -1, plat->match_table, &match);
+ if (noff < 0)
+ continue;
-/* Full tlb flush always */
-#define U540_TLB_RANGE_FLUSH_LIMIT 0
+ generic_plat = plat;
+ generic_plat_match = match;
+ break;
+ }
+}
-unsigned long log2roundup(unsigned long x);
+extern struct sbi_platform platform;
+static u32 generic_hart_index2id[SBI_HARTMASK_MAX_BITS] = { 0 };
-static struct plic_data plic = {
- .addr = U540_PLIC_ADDR,
- .num_src = U540_PLIC_NUM_SOURCES,
-};
+/*
+ * The fw_platform_init() function is called very early on the boot HART
+ * OpenSBI reference firmwares so that platform specific code get chance
+ * to update "platform" instance before it is used.
+ *
+ * The arguments passed to fw_platform_init() function are boot time state
+ * of A0 to A4 register. The "arg0" will be boot HART id and "arg1" will
+ * be address of FDT passed by previous booting stage.
+ *
+ * The return value of fw_platform_init() function is the FDT location. If
+ * FDT is unchanged (or FDT is modified in-place) then fw_platform_init()
+ * can always return the original FDT location (i.e. 'arg1') unmodified.
+ */
+unsigned long fw_platform_init(unsigned long arg0, unsigned long arg1,
+ unsigned long arg2, unsigned long arg3,
+ unsigned long arg4)
+{
+ const char *model, *mmu_type;
+ void *fdt = (void *)arg1;
+ u32 hartid, hart_count = 0;
+ int rc, root_offset, cpus_offset, cpu_offset, len;
-static struct clint_data clint = {
- .addr = CLINT_REG_BASE_ADDR,
- .first_hartid = 0,
- .hart_count = U540_HART_COUNT,
- .has_64bit_mmio = TRUE,
-};
+ root_offset = fdt_path_offset(fdt, "/");
+ if (root_offset < 0)
+ goto fail;
+
+ fw_platform_lookup_special(fdt, root_offset);
+
+ model = fdt_getprop(fdt, root_offset, "model", &len);
+ if (model)
+ sbi_strncpy(platform.name, model, sizeof(platform.name));
+
+ if (generic_plat && generic_plat->features)
+ platform.features = generic_plat->features(generic_plat_match);
+
+ cpus_offset = fdt_path_offset(fdt, "/cpus");
+ if (cpus_offset < 0)
+ goto fail;
+
+ fdt_for_each_subnode(cpu_offset, fdt, cpus_offset) {
+ rc = fdt_parse_hart_id(fdt, cpu_offset, &hartid);
+ if (rc)
+ continue;
+
+ if (SBI_HARTMASK_MAX_BITS <= hartid)
+ continue;
+
+ mmu_type = fdt_getprop(fdt, cpu_offset, "mmu-type", &len);
+ if (!mmu_type || !len)
+ hartid = -1U;
+
+ generic_hart_index2id[hart_count++] = hartid;
+ }
-static void U540_modify_dt(void *fdt)
+ platform.hart_count = hart_count;
+
+ /* Return original FDT pointer */
+ return arg1;
+
+fail:
+ while (1)
+ wfi();
+}
+
+static int generic_early_init(bool cold_boot)
+{
+ int rc;
+
+ if (generic_plat && generic_plat->early_init) {
+ rc = generic_plat->early_init(cold_boot, generic_plat_match);
+ if (rc)
+ return rc;
+ }
+
+ if (!cold_boot)
+ return 0;
+
+ return fdt_reset_init();
+}
+
+static int generic_final_init(bool cold_boot)
{
+ void *fdt;
+ int rc;
+
+ if (generic_plat && generic_plat->final_init) {
+ rc = generic_plat->final_init(cold_boot, generic_plat_match);
+ if (rc)
+ return rc;
+ }
+
+ if (!cold_boot)
+ return 0;
+
+ fdt = sbi_scratch_thishart_arg1_ptr();
+
fdt_cpu_fixup(fdt);
-
fdt_fixups(fdt);
- /*
- * SiFive Freedom U540 has an erratum that prevents S-mode software
- * to access a PMP protected region using 1GB page table mapping, so
- * always add the no-map attribute on this platform.
- */
- fdt_reserved_memory_nomap_fixup(fdt);
-}
-
-static int U540_final_init(bool cold_boot)
-{
- void *fdt;
- struct sbi_scratch *ThisScratch;
-
- if (!cold_boot)
- return 0;
-
- fdt = sbi_scratch_thishart_arg1_ptr();
- U540_modify_dt(fdt);
- //
- // Set PMP of firmware regions to R and X. We will lock this in the end of PEI.
- // This region only protects SEC, PEI and Scratch buffer.
- //
- ThisScratch = sbi_scratch_thishart_ptr ();
- pmp_set(0, PMP_R | PMP_X | PMP_W, ThisScratch->fw_start, log2roundup (ThisScratch->fw_size));
- return 0;
-}
-
-static u32 U540_pmp_region_count(u32 hartid)
-{
- return 1;
-}
-
-static int U540_pmp_region_info(u32 hartid, u32 index,
- ulong *prot, ulong *addr, ulong *log2size)
-{
- int ret = 0;
-
- switch (index) {
- case 0:
- *prot = PMP_R | PMP_W | PMP_X;
- *addr = 0;
- *log2size = __riscv_xlen;
- break;
- default:
- ret = -1;
- break;
- };
-
- return ret;
-}
-
-static int U540_console_init(void)
-{
- unsigned long peri_in_freq;
+ if (generic_plat && generic_plat->fdt_fixup) {
+ rc = generic_plat->fdt_fixup(fdt, generic_plat_match);
+ if (rc)
+ return rc;
+ }
- peri_in_freq = U540_SYS_CLK/2;
- return sifive_uart_init(U540_UART_ADDR, peri_in_freq, U540_UART_BAUDRATE);
+ return 0;
}
-static int U540_irqchip_init(bool cold_boot)
+static void generic_early_exit(void)
{
- int rc;
- u32 hartid = current_hartid();
-
- if (cold_boot) {
- rc = plic_cold_irqchip_init(&plic);
- if (rc)
- return rc;
- }
-
- return plic_warm_irqchip_init(&plic,
- (hartid) ? (2 * hartid - 1) : 0,
- (hartid) ? (2 * hartid) : -1);
+ if (generic_plat && generic_plat->early_exit)
+ generic_plat->early_exit(generic_plat_match);
}
-static int U540_ipi_init(bool cold_boot)
+static void generic_final_exit(void)
{
- int rc;
-
- if (cold_boot) {
- rc = clint_cold_ipi_init(&clint);
- if (rc)
- return rc;
-
- }
-
- return clint_warm_ipi_init();
-}
-
-static u64 U540_get_tlbr_flush_limit(void)
-{
- return U540_TLB_RANGE_FLUSH_LIMIT;
+ if (generic_plat && generic_plat->final_exit)
+ generic_plat->final_exit(generic_plat_match);
}
-static int U540_timer_init(bool cold_boot)
+static u64 generic_tlbr_flush_limit(void)
{
- int rc;
-
- if (cold_boot) {
- rc = clint_cold_timer_init(&clint, NULL);
- if (rc)
- return rc;
- }
-
- return clint_warm_timer_init();
+ if (generic_plat && generic_plat->tlbr_flush_limit)
+ return generic_plat->tlbr_flush_limit(generic_plat_match);
+ return SBI_PLATFORM_TLB_RANGE_FLUSH_LIMIT_DEFAULT;
}
-/**
- * The U540 SoC has 5 HARTs, Boot HART ID is determined by
- * PcdBootHartId.
- */
-static u32 U540_hart_index2id[U540_BOOTABLE_HART_COUNT] = {1, 2, 3, 4};
-static int U540_system_reset(u32 type)
+static int generic_system_reset(u32 reset_type)
{
- /* For now nothing to do. */
- return 0;
+ if (generic_plat && generic_plat->system_reset)
+ return generic_plat->system_reset(reset_type,
+ generic_plat_match);
+ return fdt_system_reset(reset_type);
}
const struct sbi_platform_operations platform_ops = {
- .pmp_region_count = U540_pmp_region_count,
- .pmp_region_info = U540_pmp_region_info,
- .final_init = U540_final_init,
- .console_putc = sifive_uart_putc,
- .console_getc = sifive_uart_getc,
- .console_init = U540_console_init,
- .irqchip_init = U540_irqchip_init,
- .ipi_send = clint_ipi_send,
- .ipi_clear = clint_ipi_clear,
- .ipi_init = U540_ipi_init,
- .get_tlbr_flush_limit = U540_get_tlbr_flush_limit,
- .timer_value = clint_timer_value,
- .timer_event_stop = clint_timer_event_stop,
- .timer_event_start = clint_timer_event_start,
- .timer_init = U540_timer_init,
- .system_reset = U540_system_reset
+ .early_init = generic_early_init,
+ .final_init = generic_final_init,
+ .early_exit = generic_early_exit,
+ .final_exit = generic_final_exit,
+ .console_putc = fdt_serial_putc,
+ .console_getc = fdt_serial_getc,
+ .console_init = fdt_serial_init,
+ .irqchip_init = fdt_irqchip_init,
+ .irqchip_exit = fdt_irqchip_exit,
+ .ipi_send = fdt_ipi_send,
+ .ipi_clear = fdt_ipi_clear,
+ .ipi_init = fdt_ipi_init,
+ .ipi_exit = fdt_ipi_exit,
+ .get_tlbr_flush_limit = generic_tlbr_flush_limit,
+ .timer_value = fdt_timer_value,
+ .timer_event_stop = fdt_timer_event_stop,
+ .timer_event_start = fdt_timer_event_start,
+ .timer_init = fdt_timer_init,
+ .timer_exit = fdt_timer_exit,
+ .system_reset = generic_system_reset,
};
-const struct sbi_platform platform = {
- .opensbi_version = OPENSBI_VERSION, // The OpenSBI version this platform table is built bassed on.
- .platform_version = SBI_PLATFORM_VERSION(0x0001, 0x0000), // SBI Platform version 1.0
- .name = "SiFive Freedom U540",
- .features = SBI_PLATFORM_DEFAULT_FEATURES,
- .hart_count = U540_BOOTABLE_HART_COUNT,
- .hart_index2id = U540_hart_index2id,
- .hart_stack_size = U540_HART_STACK_SIZE,
- .platform_ops_addr = (unsigned long)&platform_ops
+struct sbi_platform platform = {
+ .opensbi_version = OPENSBI_VERSION,
+ .platform_version = SBI_PLATFORM_VERSION(0x0, 0x01),
+ .name = "Generic",
+ .features = SBI_PLATFORM_DEFAULT_FEATURES,
+ .hart_count = SBI_HARTMASK_MAX_BITS,
+ .hart_index2id = generic_hart_index2id,
+ .hart_stack_size = SBI_PLATFORM_DEFAULT_HART_STACK_SIZE,
+ .platform_ops_addr = (unsigned long)&platform_ops
};
diff --git a/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/PlatformOverride.h b/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/PlatformOverride.h
new file mode 100644
index 0000000000..8a53cdf9ac
--- /dev/null
+++ b/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/PlatformOverride.h
@@ -0,0 +1,27 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ *
+ * Authors:
+ * Anup Patel <anup.patel@wdc.com>
+ */
+
+#ifndef __PLATFORM_OVERRIDE_H__
+#define __PLATFORM_OVERRIDE_H__
+
+#include <sbi/sbi_types.h>
+
+struct platform_override {
+ const struct fdt_match *match_table;
+ u64 (*features)(const struct fdt_match *match);
+ u64 (*tlbr_flush_limit)(const struct fdt_match *match);
+ int (*early_init)(bool cold_boot, const struct fdt_match *match);
+ int (*final_init)(bool cold_boot, const struct fdt_match *match);
+ void (*early_exit)(const struct fdt_match *match);
+ void (*final_exit)(const struct fdt_match *match);
+ int (*system_reset)(u32 reset_type, const struct fdt_match *match);
+ int (*fdt_fixup)(void *fdt, const struct fdt_match *match);
+};
+
+#endif
diff --git a/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/SifiveFu540.c b/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/SifiveFu540.c
new file mode 100644
index 0000000000..b7d935e95e
--- /dev/null
+++ b/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/Library/OpensbiPlatformLib/SifiveFu540.c
@@ -0,0 +1,47 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ *
+ * Authors:
+ * Anup Patel <anup.patel@wdc.com>
+ */
+
+#include <PlatformOverride.h>
+#include <sbi_utils/fdt/fdt_helper.h>
+#include <sbi_utils/fdt/fdt_fixup.h>
+
+static u64 sifive_fu540_tlbr_flush_limit(const struct fdt_match *match)
+{
+ /*
+ * The sfence.vma by virtual address does not work on
+ * SiFive FU540 so we return remote TLB flush limit as zero.
+ */
+ return 0;
+}
+
+static int sifive_fu540_fdt_fixup(void *fdt, const struct fdt_match *match)
+{
+ /*
+ * SiFive Freedom U540 has an erratum that prevents S-mode software
+ * to access a PMP protected region using 1GB page table mapping, so
+ * always add the no-map attribute on this platform.
+ */
+ fdt_reserved_memory_nomap_fixup(fdt);
+
+ return 0;
+}
+
+static const struct fdt_match sifive_fu540_match[] = {
+ { .compatible = "sifive,fu540" },
+ { .compatible = "sifive,fu540g" },
+ { .compatible = "sifive,fu540-c000" },
+ { .compatible = "sifive,hifive-unleashed-a00" },
+ { },
+};
+
+const struct platform_override sifive_fu540 = {
+ .match_table = sifive_fu540_match,
+ .tlbr_flush_limit = sifive_fu540_tlbr_flush_limit,
+ .fdt_fixup = sifive_fu540_fdt_fixup,
+};
diff --git a/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/U540.fdf.inc b/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/U540.fdf.inc
index 723632dc79..8e7afc2d82 100644
--- a/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/U540.fdf.inc
+++ b/Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/U540.fdf.inc
@@ -23,10 +23,10 @@ DEFINE CODE_BLOCKS = 0x7E0
DEFINE VARS_BLOCKS = 0x20
DEFINE SECFV_OFFSET = 0x00000000
-DEFINE SECFV_SIZE = 0x00020000
-DEFINE PEIFV_OFFSET = 0x00020000
+DEFINE SECFV_SIZE = 0x00030000
+DEFINE PEIFV_OFFSET = 0x00030000
DEFINE PEIFV_SIZE = 0x00080000
-DEFINE SCRATCH_OFFSET = 0x000a0000
+DEFINE SCRATCH_OFFSET = 0x000b0000
DEFINE SCRATCH_SIZE = 0x00010000
DEFINE FVMAIN_OFFSET = 0x00100000 # Must be power of 2 for PMP setting
DEFINE FVMAIN_SIZE = 0x0018C000
--
2.33.0
next prev parent reply other threads:[~2021-10-06 11:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-06 11:58 [edk2-platforms][PATCH v2 08/14] RISC-V/PlatformPkg: Build DeviceTree and use that in SEC Daniel Schaefer
2021-10-06 11:58 ` [edk2-platforms][PATCH v2 09/14] RISC-V/PlatformPkg: Add FdtPeim to pass DTB from PEI to DXE via HOB Daniel Schaefer
2021-10-06 11:58 ` [edk2-platforms][PATCH v2 10/14] RISC-V/PlatformPkg: Fixup FDT from HOB and install into config table Daniel Schaefer
2021-10-06 11:58 ` Daniel Schaefer [this message]
2021-10-06 11:58 ` [[edk2-platforms] PATCH v2 12/14] RISC-V: Switch to latest OpenSBI Daniel Schaefer
2021-10-06 11:58 ` [edk2-platforms][PATCH v2 13/14] RISC-V: Implement ResetSystem RT call Daniel Schaefer
2021-10-06 11:58 ` [edk2-platforms][PATCH v2 14/14] Move OpenSbiPlatformLib to RISC-V/PlatformPkg Daniel Schaefer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211006115836.3641776-4-daniel.schaefer@hpe.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox