public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Ming Huang" <huangming@linux.alibaba.com>
To: devel@edk2.groups.io, sami.mujawar@arm.com,
	ardb+tianocore@kernel.org, jiewen.yao@intel.com,
	supreeth.venkatesh@arm.com
Cc: ming.huang-@outlook.com, Ming Huang <huangming@linux.alibaba.com>
Subject: [PATCH edk2 v1 3/3] StandaloneMmPkg: Fix check buffer address failed issue from TF-A
Date: Fri, 15 Oct 2021 17:06:23 +0800	[thread overview]
Message-ID: <20211015090623.52511-4-huangming@linux.alibaba.com> (raw)
In-Reply-To: <20211015090623.52511-1-huangming@linux.alibaba.com>

There are two scene communicate with StandaloneMm(MM):
1 edk2 -> TF-A -> MM, communicate MM use non-secure buffer which
  specify by EFI_SECURE_PARTITION_BOOT_INFO.SpNsCommBufBase;
2 RAS scene: fiq -> TF-A -> MM, use secure buffer which
  specify by EFI_SECURE_PARTITION_BOOT_INFO.SpShareBufBase;

For now, the second scene will failed because check buffer address.
This patch add CheckBufferAddr() to support check address for secure
buffer.

Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
---
 StandaloneMmPkg/Drivers/StandaloneMmCpu/EventHandle.c     | 70 ++++++++++++++++----
 StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.c | 21 ++++++
 StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.h |  1 +
 3 files changed, 79 insertions(+), 13 deletions(-)

diff --git a/StandaloneMmPkg/Drivers/StandaloneMmCpu/EventHandle.c b/StandaloneMmPkg/Drivers/StandaloneMmCpu/EventHandle.c
index 5dfaf9d751..63fab1bd78 100644
--- a/StandaloneMmPkg/Drivers/StandaloneMmCpu/EventHandle.c
+++ b/StandaloneMmPkg/Drivers/StandaloneMmCpu/EventHandle.c
@@ -50,6 +50,7 @@ EFI_MM_COMMUNICATE_HEADER **PerCpuGuidedEventContext = NULL;
 
 // Descriptor with whereabouts of memory used for communication with the normal world
 EFI_MMRAM_DESCRIPTOR  mNsCommBuffer;
+EFI_MMRAM_DESCRIPTOR  mSCommBuffer;
 
 MP_INFORMATION_HOB_DATA *mMpInformationHobData;
 
@@ -60,6 +61,58 @@ EFI_MM_CONFIGURATION_PROTOCOL mMmConfig = {
 
 STATIC EFI_MM_ENTRY_POINT     mMmEntryPoint = NULL;
 
+STATIC
+EFI_STATUS
+CheckBufferAddr (
+  IN UINTN CommBufferAddr
+  )
+{
+  UINTN      CommBufferSize;
+  EFI_STATUS Status;
+
+  Status =  EFI_SUCCESS;
+  if (CommBufferAddr < mNsCommBuffer.PhysicalStart) {
+    Status = EFI_ACCESS_DENIED;
+  }
+
+  if ((CommBufferAddr + sizeof (EFI_MM_COMMUNICATE_HEADER)) >=
+      (mNsCommBuffer.PhysicalStart + mNsCommBuffer.PhysicalSize)) {
+    Status =  EFI_INVALID_PARAMETER;
+  }
+
+  // Find out the size of the buffer passed
+  CommBufferSize = ((EFI_MM_COMMUNICATE_HEADER *) CommBufferAddr)->MessageLength +
+    sizeof (EFI_MM_COMMUNICATE_HEADER);
+
+  // perform bounds check.
+  if (CommBufferAddr + CommBufferSize >=
+      mNsCommBuffer.PhysicalStart + mNsCommBuffer.PhysicalSize) {
+    Status =  EFI_ACCESS_DENIED;
+  }
+
+  if (!EFI_ERROR (Status)) {
+    return EFI_SUCCESS;
+  }
+
+  Status =  EFI_SUCCESS;
+  if (CommBufferAddr < mSCommBuffer.PhysicalStart) {
+    Status = EFI_ACCESS_DENIED;
+  }
+
+  if ((CommBufferAddr + sizeof (EFI_MM_COMMUNICATE_HEADER)) >=
+      (mSCommBuffer.PhysicalStart + mSCommBuffer.PhysicalSize)) {
+    Status =  EFI_INVALID_PARAMETER;
+  }
+
+  // perform bounds check.
+  if (CommBufferAddr + CommBufferSize >=
+      mSCommBuffer.PhysicalStart + mSCommBuffer.PhysicalSize) {
+    Status =  EFI_ACCESS_DENIED;
+  }
+
+  return Status;
+}
+
 /**
   The PI Standalone MM entry point for the TF-A CPU driver.
 
@@ -104,25 +157,16 @@ PiMmStandaloneArmTfCpuDriverEntry (
     return EFI_INVALID_PARAMETER;
   }
 
-  if (NsCommBufferAddr < mNsCommBuffer.PhysicalStart) {
-    return EFI_ACCESS_DENIED;
-  }
-
-  if ((NsCommBufferAddr + sizeof (EFI_MM_COMMUNICATE_HEADER)) >=
-      (mNsCommBuffer.PhysicalStart + mNsCommBuffer.PhysicalSize)) {
-    return EFI_INVALID_PARAMETER;
+  Status = CheckBufferAddr (NsCommBufferAddr);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "Check Buffer failed: %r\n", Status));
+    return Status;
   }
 
   // Find out the size of the buffer passed
   NsCommBufferSize = ((EFI_MM_COMMUNICATE_HEADER *) NsCommBufferAddr)->MessageLength +
     sizeof (EFI_MM_COMMUNICATE_HEADER);
 
-  // perform bounds check.
-  if (NsCommBufferAddr + NsCommBufferSize >=
-      mNsCommBuffer.PhysicalStart + mNsCommBuffer.PhysicalSize) {
-    return EFI_ACCESS_DENIED;
-  }
-
   GuidedEventContext = NULL;
   // Now that the secure world can see the normal world buffer, allocate
   // memory to copy the communication buffer to the secure world.
diff --git a/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.c b/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.c
index fd9c59b4da..96dad20dd1 100644
--- a/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.c
+++ b/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.c
@@ -107,6 +107,7 @@ StandaloneMmCpuInitialize (
   UINTN                            Index;
   UINTN                            ArraySize;
   VOID                            *HobStart;
+  EFI_MMRAM_HOB_DESCRIPTOR_BLOCK  *MmramRangesHob;
 
   ASSERT (SystemTable != NULL);
   mMmst = SystemTable;
@@ -186,6 +187,26 @@ StandaloneMmCpuInitialize (
   CopyMem (&mNsCommBuffer, NsCommBufMmramRange, sizeof(EFI_MMRAM_DESCRIPTOR));
   DEBUG ((DEBUG_INFO, "mNsCommBuffer: 0x%016lx - 0x%lx\n", mNsCommBuffer.CpuStart, mNsCommBuffer.PhysicalSize));
 
+  Status = GetGuidedHobData (
+             HobStart,
+             &gEfiMmPeiMmramMemoryReserveGuid,
+             (VOID **) &MmramRangesHob
+             );
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "MmramRangesHob data extraction failed - 0x%x\n", Status));
+    return Status;
+  }
+
+  //
+  // As CreateHobListFromBootInfo(), the base and size of buffer shared with
+  // privileged Secure world software is in second one.
+  //
+  CopyMem (
+    &mSCommBuffer,
+    &MmramRangesHob->Descriptor[0] + 1,
+    sizeof(EFI_MMRAM_DESCRIPTOR)
+  );
+
   //
   // Extract the MP information from the Hoblist
   //
diff --git a/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.h b/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.h
index 2c96439c15..2e03b20d85 100644
--- a/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.h
+++ b/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.h
@@ -30,6 +30,7 @@ extern EFI_MM_CPU_PROTOCOL mMmCpuState;
 //
 extern EFI_MM_COMMUNICATE_HEADER    **PerCpuGuidedEventContext;
 extern EFI_MMRAM_DESCRIPTOR          mNsCommBuffer;
+extern EFI_MMRAM_DESCRIPTOR          mSCommBuffer;
 extern MP_INFORMATION_HOB_DATA       *mMpInformationHobData;
 extern EFI_MM_CONFIGURATION_PROTOCOL mMmConfig;
 
-- 
2.17.1


  parent reply	other threads:[~2021-10-15  9:07 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-15  9:06 [PATCH edk2 v1 0/3] Fix several issues in StanaloneMmPkg Ming Huang
2021-10-15  9:06 ` [PATCH edk2 v1 1/3] StandaloneMmPkg: Fix issue about SpPcpuSharedBufSize field Ming Huang
2021-12-15  8:44   ` Ard Biesheuvel
2021-12-16  8:07     ` Masahisa Kojima
2021-12-16 10:05       ` [edk2-devel] " Jeff Fan
2021-12-16 11:09       ` Ard Biesheuvel
2021-10-15  9:06 ` [PATCH edk2 v1 2/3] StandaloneMmPkg: Replace DEBUG_INFO with DEBUG_ERROR Ming Huang
2021-10-15  9:06 ` Ming Huang [this message]
2021-12-08 17:46   ` [edk2-devel] [PATCH edk2 v1 3/3] StandaloneMmPkg: Fix check buffer address failed issue from TF-A Omkar Anand Kulkarni
2021-12-15 15:02     ` Ming Huang
2021-12-21 14:59     ` Ming Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211015090623.52511-4-huangming@linux.alibaba.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox