From: "Nhi Pham" <nhi@os.amperecomputing.com>
To: devel@edk2.groups.io
Cc: patches@amperecomputing.com, nhi@os.amperecomputing.com,
vunguyen@os.amperecomputing.com,
Thang Nguyen <thang@os.amperecomputing.com>,
Chuong Tran <chuong@os.amperecomputing.com>,
Phong Vo <phong@os.amperecomputing.com>,
Leif Lindholm <leif@nuviainc.com>,
Michael D Kinney <michael.d.kinney@intel.com>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Nate DeSimone <nathaniel.l.desimone@intel.com>
Subject: [edk2-platforms][PATCH v4 16/31] AmpereAltraPkg: Add PciSegmentLib library instance
Date: Fri, 22 Oct 2021 13:17:54 +0700 [thread overview]
Message-ID: <20211022061809.31087-17-nhi@os.amperecomputing.com> (raw)
In-Reply-To: <20211022061809.31087-1-nhi@os.amperecomputing.com>
From: Vu Nguyen <vunguyen@os.amperecomputing.com>
Provides functions to handle the PCIe configuration requests. The target
Root Complex is selected based on the segment number parsed from the input
address.
Cc: Thang Nguyen <thang@os.amperecomputing.com>
Cc: Chuong Tran <chuong@os.amperecomputing.com>
Cc: Phong Vo <phong@os.amperecomputing.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
---
Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dsc.inc | 1 +
Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLibPci.inf | 32 +
Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLib.c | 1573 ++++++++++++++++++++
3 files changed, 1606 insertions(+)
diff --git a/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dsc.inc b/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dsc.inc
index 3b576df24073..1dee436f97b4 100644
--- a/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dsc.inc
+++ b/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dsc.inc
@@ -226,6 +226,7 @@ [LibraryClasses.common.DXE_DRIVER]
PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
PciHostBridgeLib|Silicon/Ampere/AmpereAltraPkg/Library/PciHostBridgeLib/PciHostBridgeLib.inf
+ PciSegmentLib|Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLibPci.inf
[LibraryClasses.common.UEFI_APPLICATION]
UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiTianoCustomDecompressLib.inf
diff --git a/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLibPci.inf b/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLibPci.inf
new file mode 100644
index 000000000000..ca564997e609
--- /dev/null
+++ b/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLibPci.inf
@@ -0,0 +1,32 @@
+## @file
+#
+# Copyright (c) 2021, Ampere Computing LLC. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = PciSegmentLibPci
+ FILE_GUID = 0AF5E76D-D31E-492B-AE69-A7B441FF62D9
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PciSegmentLib
+
+[Sources]
+ PciSegmentLib.c
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ HobLib
+ IoLib
+
+[Guids]
+ gRootComplexInfoHobGuid
diff --git a/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLib.c b/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLib.c
new file mode 100644
index 000000000000..854f50f953be
--- /dev/null
+++ b/Silicon/Ampere/AmpereAltraPkg/Library/PciSegmentLibPci/PciSegmentLib.c
@@ -0,0 +1,1573 @@
+/** @file
+
+ Copyright (c) 2021, Ampere Computing LLC. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiDxe.h>
+
+#include <Guid/RootComplexInfoHob.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/IoLib.h>
+#include <Library/PciSegmentLib.h>
+
+#include <Platform/Ac01.h>
+
+#define GET_SEG_NUM(Address) (((Address) >> 32) & 0xFFFF)
+#define GET_BUS_NUM(Address) (((Address) >> 20) & 0x7F)
+#define GET_DEV_NUM(Address) (((Address) >> 15) & 0x1F)
+#define GET_FUNC_NUM(Address) (((Address) >> 12) & 0x07)
+#define GET_REG_NUM(Address) ((Address) & 0xFFF)
+
+/**
+ Assert the validity of a PCI Segment address.
+ A valid PCI Segment address should not contain 1's in bits 28..31 and 48..63.
+
+ @param A The address to validate.
+ @param M Additional bits to assert to be zero.
+
+**/
+#define ASSERT_INVALID_PCI_SEGMENT_ADDRESS(A,M) \
+ ASSERT (((A) & (0xffff0000f0000000ULL | (M))) == 0)
+
+/**
+ Convert the PCI Segment library address to PCI library address.
+
+ @param A The address to convert.
+**/
+#define PCI_SEGMENT_TO_PCI_ADDRESS(A) ((UINTN)(UINT32)A)
+
+/**
+ Get the MCFG Base from input Address.
+**/
+UINTN
+GetMmcfgBase (
+ IN UINTN Address
+ )
+{
+ AC01_ROOT_COMPLEX *RootComplexList;
+ UINTN Idx;
+ VOID *Hob;
+
+ Hob = GetFirstGuidHob (&gRootComplexInfoHobGuid);
+ if (Hob == NULL) {
+ return 0;
+ }
+
+ RootComplexList = (AC01_ROOT_COMPLEX *)GET_GUID_HOB_DATA (Hob);
+
+ for (Idx = 0; Idx < AC01_PCIE_MAX_ROOT_COMPLEX; Idx++) {
+ if (RootComplexList[Idx].Logical == GET_SEG_NUM (Address)) {
+ return RootComplexList[Idx].MmcfgBase;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ Register a PCI device so PCI configuration registers may be accessed after
+ SetVirtualAddressMap().
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @retval RETURN_SUCCESS The PCI device was registered for runtime access.
+ @retval RETURN_UNSUPPORTED An attempt was made to call this function
+ after ExitBootServices().
+ @retval RETURN_UNSUPPORTED The resources required to access the PCI device
+ at runtime could not be mapped.
+ @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to
+ complete the registration.
+
+**/
+RETURN_STATUS
+EFIAPI
+PciSegmentRegisterForRuntimeAccess (
+ IN UINTN Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+ return RETURN_UNSUPPORTED;
+}
+
+/**
+ Reads an 8-bit PCI configuration register.
+
+ Reads and returns the 8-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+
+ @return The 8-bit PCI configuration register specified by Address.
+
+**/
+UINT8
+EFIAPI
+PciSegmentRead8 (
+ IN UINT64 Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+ UINTN CfgBase;
+ UINT8 Value;
+
+ CfgBase = GetMmcfgBase (Address) + (Address & 0x0FFFFFFF);
+
+ UINT64 AlignedAddr = CfgBase & ~0x3;
+ UINT32 Val32 = MmioRead32 (AlignedAddr);
+ switch (CfgBase & 0x3) {
+ case 3:
+ Value = Val32 >> 24;
+ break;
+
+ case 2:
+ Value = Val32 >> 16;
+ break;
+
+ case 1:
+ Value = Val32 >> 8;
+ break;
+
+ case 0:
+ default:
+ Value = Val32;
+ break;
+ }
+ DEBUG ((
+ DEBUG_INFO,
+ "PCIE CFG RD8: 0x%p value: 0x%02X (0x%08llX 0x%08X)\n",
+ CfgBase,
+ Value,
+ AlignedAddr,
+ Val32
+ ));
+
+ return Value;
+}
+
+/**
+ Writes an 8-bit PCI configuration register.
+
+ Writes the 8-bit PCI configuration register specified by Address with the value specified by Value.
+ Value is returned. This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param Value The value to write.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentWrite8 (
+ IN UINT64 Address,
+ IN UINT8 Value
+ )
+{
+ UINT32 Val32;
+ UINT64 AlignedAddr;
+ UINTN CfgBase;
+
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+ CfgBase = GetMmcfgBase (Address) + (Address & 0x0FFFFFFF);
+
+ AlignedAddr = CfgBase & ~0x3;
+ Val32 = MmioRead32 (AlignedAddr);
+
+ switch (CfgBase & 0x3) {
+ case 0:
+ Val32 &= ~0xFF;
+ Val32 |= Value;
+ break;
+
+ case 1:
+ Val32 &= ~0xFF00;
+ Val32 |= (UINT32)Value << 8;
+ break;
+
+ case 2:
+ Val32 &= ~0xFF0000;
+ Val32 |= (UINT32)Value << 16;
+ break;
+
+ case 3:
+ default:
+ Val32 &= ~0xFF000000;
+ Val32 |= (UINT32)Value << 24;
+ break;
+ }
+ MmioWrite32 (AlignedAddr, Val32);
+ DEBUG ((
+ DEBUG_INFO,
+ "PCIE CFG WR8: 0x%p value: 0x%04X (0x%08llX 0x%08X)\n",
+ CfgBase,
+ Value,
+ AlignedAddr,
+ MmioRead32 ((UINT64)AlignedAddr)
+ ));
+
+ return Value;
+}
+
+/**
+ Performs a bitwise OR of an 8-bit PCI configuration register with an 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified by OrData,
+ and writes the result to the 8-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentOr8 (
+ IN UINT64 Address,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (PCI_SEGMENT_TO_PCI_ADDRESS (Address), (UINT8)(PciSegmentRead8 (Address) | OrData));
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ and writes the result to the 8-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentAnd8 (
+ IN UINT64 Address,
+ IN UINT8 AndData
+ )
+{
+ return PciSegmentWrite8 (Address, (UINT8)(PciSegmentRead8 (Address) & AndData));
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value,
+ followed a bitwise OR with another 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+ and writes the result to the 8-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentAndThenOr8 (
+ IN UINT64 Address,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (Address, (UINT8)((PciSegmentRead8 (Address) & AndData) | OrData));
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in an 8-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldRead8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead8 (PciSegmentRead8 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 8-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param Value New value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldWrite8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 Value
+ )
+{
+ return PciSegmentWrite8 (
+ Address,
+ BitFieldWrite8 (PciSegmentRead8 (Address), StartBit, EndBit, Value)
+ );
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 8-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldOr8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (
+ Address,
+ BitFieldOr8 (PciSegmentRead8 (Address), StartBit, EndBit, OrData)
+ );
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 8-bit register.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 8-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldAnd8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData
+ )
+{
+ return PciSegmentWrite8 (
+ Address,
+ BitFieldAnd8 (PciSegmentRead8 (Address), StartBit, EndBit, AndData)
+ );
+}
+
+/**
+ Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 8-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldAndThenOr8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (
+ Address,
+ BitFieldAndThenOr8 (PciSegmentRead8 (Address), StartBit, EndBit, AndData, OrData)
+ );
+}
+
+/**
+ Reads a 16-bit PCI configuration register.
+
+ Reads and returns the 16-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+
+ @return The 16-bit PCI configuration register specified by Address.
+
+**/
+UINT16
+EFIAPI
+PciSegmentRead16 (
+ IN UINT64 Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+ UINTN CfgBase;
+ UINT16 Value;
+
+ CfgBase = GetMmcfgBase (Address) + (Address & 0x0FFFFFFE);
+ UINT64 AlignedAddr = CfgBase & ~0x3;
+ UINT32 RegC, Reg18;
+ UINT8 MfHt, Primary = 0, Sec = 0, Sub = 0;
+ UINT32 Val32;
+
+ if ((GET_BUS_NUM (CfgBase) > 0) && (GET_DEV_NUM (CfgBase) > 0) && (GET_REG_NUM (CfgBase) == 0)) {
+ Value = MmioRead32 (CfgBase);
+ DEBUG ((
+ DEBUG_INFO,
+ "PCIE CFG16 RD: B%X|D%X 0x%p value: 0x%08X\n",
+ GET_BUS_NUM (CfgBase),
+ GET_DEV_NUM (CfgBase),
+ CfgBase,
+ Value
+ ));
+
+ if (Value != 0xffff) {
+ RegC = MmioRead32 (CfgBase + 0xC);
+ DEBUG ((DEBUG_INFO, " Peek PCIE MfHt RD: 0x%p value: 0x%08X\n", CfgBase + 0xc, RegC));
+ MfHt = RegC >> 16;
+ DEBUG ((DEBUG_INFO, " Peek RD8 MfHt=0x%02X\n", MfHt));
+
+ if ((MfHt & 0x7F)!= 0) { /* Type 1 header */
+ Reg18 = MmioRead32 (CfgBase + 0x18);
+ Primary = Reg18; Sec = Reg18 >> 8; Sub = Reg18 >> 16;
+ DEBUG ((
+ DEBUG_INFO,
+ " Bus Peek PCIE Sub:%01X Sec:%01X Primary:%01X RD: 0x%p value: 0x%08X\n",
+ Sub,
+ Sec,
+ Primary,
+ CfgBase + 0x18,
+ Reg18
+ ));
+ }
+
+ if ((MfHt == 0) || (Primary != 0)) { /* QS RPs Primary Bus is 0b */
+ Value = 0xffff;
+ DEBUG ((
+ DEBUG_INFO,
+ " Skip RD16 B%X|D%X PCIE CFG RD: 0x%p return 0xffff\n",
+ GET_BUS_NUM (CfgBase),
+ GET_DEV_NUM (CfgBase),
+ CfgBase
+ ));
+ return 0;
+ }
+ }
+ }
+
+ Val32 = MmioRead32 (AlignedAddr);
+ switch (CfgBase & 0x3) {
+ case 2:
+ Value = Val32 >> 16;
+ break;
+
+ case 0:
+ default:
+ Value = Val32;
+ break;
+ }
+ DEBUG ((
+ DEBUG_INFO,
+ "PCIE CFG RD16: 0x%p value: 0x%04X (0x%08llX 0x%08X)\n",
+ CfgBase,
+ Value,
+ AlignedAddr,
+ Val32
+ ));
+
+ if (GET_REG_NUM (Address) == 0xAE && Value == 0xFFFF) {
+ DEBUG ((DEBUG_ERROR, "PANIC due to PCIE link issue - Addr 0x%llx\n", Address));
+ // Loop forever waiting for failsafe/watch dog time out
+ CpuDeadLoop ();
+ }
+
+ return Value;
+}
+
+/**
+ Writes a 16-bit PCI configuration register.
+
+ Writes the 16-bit PCI configuration register specified by Address with the value specified by Value.
+ Value is returned. This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param Value The value to write.
+
+ @return The parameter of Value.
+
+**/
+UINT16
+EFIAPI
+PciSegmentWrite16 (
+ IN UINT64 Address,
+ IN UINT16 Value
+ )
+{
+ UINT32 Val32;
+ UINT64 AlignedAddr;
+ UINTN CfgBase;
+
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+ CfgBase = GetMmcfgBase (Address) + (Address & 0x0FFFFFFE);
+
+ AlignedAddr = CfgBase & ~0x3;
+ Val32 = MmioRead32 (AlignedAddr);
+
+ switch (CfgBase & 0x3) {
+ case 2:
+ Val32 &= ~0xFFFF0000;
+ Val32 |= (UINT32)Value << 16;
+ break;
+
+ case 0:
+ default:
+ Val32 &= ~0xFFFF;
+ Val32 |= Value;
+ break;
+ }
+ MmioWrite32 (AlignedAddr, Val32);
+ DEBUG ((
+ DEBUG_INFO,
+ "PCIE CFG WR16: 0x%p value: 0x%04X (0x%08llX 0x%08X)\n",
+ CfgBase,
+ Value,
+ AlignedAddr,
+ MmioRead32 (AlignedAddr)
+ ));
+
+ return Value;
+}
+
+/**
+ Performs a bitwise OR of a 16-bit PCI configuration register with
+ a 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by OrData, and
+ writes the result to the 16-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned. This function
+ must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function and
+ Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentOr16 (
+ IN UINT64 Address,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) | OrData));
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ and writes the result to the 16-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentAnd16 (
+ IN UINT64 Address,
+ IN UINT16 AndData
+ )
+{
+ return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) & AndData));
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value,
+ followed a bitwise OR with another 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+ and writes the result to the 16-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentAndThenOr16 (
+ IN UINT64 Address,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address, (UINT16) ((PciSegmentRead16 (Address) & AndData) | OrData));
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 16-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldRead16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead16 (PciSegmentRead16 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 16-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param Value New value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldWrite16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 Value
+ )
+{
+ return PciSegmentWrite16 (
+ Address,
+ BitFieldWrite16 (PciSegmentRead16 (Address), StartBit, EndBit, Value)
+ );
+}
+
+/**
+ Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, writes
+ the result back to the bit field in the 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 16-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldOr16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (
+ Address,
+ BitFieldOr16 (PciSegmentRead16 (Address), StartBit, EndBit, OrData)
+ );
+}
+
+/**
+ Reads a bit field in a 16-bit PCI configuration register, performs a bitwise
+ AND, writes the result back to the bit field in the 16-bit register.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 16-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldAnd16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData
+ )
+{
+ return PciSegmentWrite16 (
+ Address,
+ BitFieldAnd16 (PciSegmentRead16 (Address), StartBit, EndBit, AndData)
+ );
+}
+
+/**
+ Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 16-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldAndThenOr16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (
+ Address,
+ BitFieldAndThenOr16 (PciSegmentRead16 (Address), StartBit, EndBit, AndData, OrData)
+ );
+}
+
+/**
+ Reads a 32-bit PCI configuration register.
+
+ Reads and returns the 32-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+
+ @return The 32-bit PCI configuration register specified by Address.
+
+**/
+UINT32
+EFIAPI
+PciSegmentRead32 (
+ IN UINT64 Address
+ )
+{
+ UINT32 RegC, Reg18;
+ UINT32 Value;
+ UINT8 MfHt, Ht, Primary = 0, Sec = 0, Sub = 0;
+ UINTN CfgBase;
+
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+ CfgBase = GetMmcfgBase (Address) + (Address & 0x0FFFFFFC);
+
+ if ((GET_BUS_NUM (CfgBase) > 0) && (GET_DEV_NUM (CfgBase) > 0) && (GET_REG_NUM (CfgBase) == 0)) {
+ Value = MmioRead32 (CfgBase);
+ DEBUG ((
+ DEBUG_INFO,
+ "PCIE CFG RD32: B%X|D%X 0x%p value: 0x%08X\n",
+ GET_BUS_NUM (CfgBase),
+ GET_DEV_NUM (CfgBase),
+ CfgBase,
+ Value
+ ));
+
+ if (Value != 0xffffffff) {
+ RegC = MmioRead32 (CfgBase + 0xC);
+ DEBUG ((DEBUG_INFO, "Peek PCIE MfHt RD32: 0x%p value: 0x%08X\n", CfgBase + 0xc, RegC));
+ MfHt = RegC >> 16;
+ DEBUG ((DEBUG_INFO, " Peek RD8 MfHt=0x%02X\n", MfHt));
+
+ Ht = MfHt & 0x7F;
+ if (Ht != 0) { /* Type 1 header */
+ Reg18 = MmioRead32 (CfgBase + 0x18);
+ Primary = Reg18; Sec = Reg18 >> 8; Sub = Reg18 >> 16;
+ DEBUG ((
+ DEBUG_INFO,
+ " Bus Peek PCIE Sub:%01X Sec:%01X Primary:%01X RD32: 0x%p value: 0x%08X\n",
+ Sub,
+ Sec,
+ Primary,
+ CfgBase + 0x18,
+ Reg18
+ ));
+ }
+ if ((Ht == 0) || (Primary != 0)) { /* Ampere Altra RPs Primary Bus is 0b */
+ Value = 0xffffffff;
+ DEBUG ((
+ DEBUG_INFO,
+ " Skip RD32 B%X|D%X PCIE CFG RD32: 0x%p return 0xffffffff\n",
+ GET_BUS_NUM (CfgBase),
+ GET_DEV_NUM (CfgBase),
+ CfgBase
+ ));
+ }
+ }
+ } else {
+ Value = MmioRead32 (CfgBase);
+ }
+
+ DEBUG ((DEBUG_INFO, "PCIE CFG RD32: 0x%p value: 0x%08X\n", CfgBase, Value));
+
+ return Value;
+}
+
+/**
+ Writes a 32-bit PCI configuration register.
+
+ Writes the 32-bit PCI configuration register specified by Address with the value specified by Value.
+ Value is returned. This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param Value The value to write.
+
+ @return The parameter of Value.
+
+**/
+UINT32
+EFIAPI
+PciSegmentWrite32 (
+ IN UINT64 Address,
+ IN UINT32 Value
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+ UINTN CfgBase;
+
+ CfgBase = GetMmcfgBase (Address) + (Address & 0x0FFFFFFC);
+ MmioWrite32 (CfgBase, Value);
+ DEBUG ((
+ DEBUG_INFO,
+ "PCIE CFG WR32: 0x%p value: 0x%08X (0x%08X)\n",
+ CfgBase,
+ Value,
+ MmioRead32 (CfgBase)
+ ));
+
+ return Value;
+}
+
+/**
+ Performs a bitwise OR of a 32-bit PCI configuration register with a 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified by OrData,
+ and writes the result to the 32-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentOr32 (
+ IN UINT64 Address,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) | OrData);
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ and writes the result to the 32-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentAnd32 (
+ IN UINT64 Address,
+ IN UINT32 AndData
+ )
+{
+ return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) & AndData);
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value,
+ followed a bitwise OR with another 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+ and writes the result to the 32-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentAndThenOr32 (
+ IN UINT64 Address,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (Address, (PciSegmentRead32 (Address) & AndData) | OrData);
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 32-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldRead32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead32 (PciSegmentRead32 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 32-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param Value New value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldWrite32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 Value
+ )
+{
+ return PciSegmentWrite32 (
+ Address,
+ BitFieldWrite32 (PciSegmentRead32 (Address), StartBit, EndBit, Value)
+ );
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 32-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldOr32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (
+ Address,
+ BitFieldOr32 (PciSegmentRead32 (Address), StartBit, EndBit, OrData)
+ );
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 32-bit register.
+
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a bitwise
+ AND between the read result and the value specified by AndData, and writes the result
+ to the 32-bit PCI configuration register specified by Address. The value written to
+ the PCI configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in AndData are stripped.
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldAnd32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData
+ )
+{
+ return PciSegmentWrite32 (
+ Address,
+ BitFieldAnd32 (PciSegmentRead32 (Address), StartBit, EndBit, AndData)
+ );
+}
+
+/**
+ Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 32-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldAndThenOr32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (
+ Address,
+ BitFieldAndThenOr32 (PciSegmentRead32 (Address), StartBit, EndBit, AndData, OrData)
+ );
+}
+
+/**
+ Reads a range of PCI configuration registers into a caller supplied buffer.
+
+ Reads the range of PCI configuration registers specified by StartAddress and
+ Size into the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be read. Size is
+ returned. When possible 32-bit PCI configuration read cycles are used to read
+ from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ and 16-bit PCI configuration read cycles may be used at the beginning and the
+ end of the range.
+
+ If any reserved bits in StartAddress are set, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress Starting address that encodes the PCI Segment, Bus, Device,
+ Function and Register.
+ @param Size Size in bytes of the transfer.
+ @param Buffer Pointer to a buffer receiving the data read.
+
+ @return Size
+
+**/
+UINTN
+EFIAPI
+PciSegmentReadBuffer (
+ IN UINT64 StartAddress,
+ IN UINTN Size,
+ OUT VOID *Buffer
+ )
+{
+ UINTN ReturnValue;
+
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0);
+ ASSERT (((StartAddress & 0xFFF) + Size) <= SIZE_4KB);
+
+ if (Size == 0) {
+ return Size;
+ }
+
+ ASSERT (Buffer != NULL);
+
+ //
+ // Save Size for return
+ //
+ ReturnValue = Size;
+
+ if ((StartAddress & BIT0) != 0) {
+ //
+ // Read a byte if StartAddress is byte aligned
+ //
+ *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress);
+ StartAddress += sizeof (UINT8);
+ Size -= sizeof (UINT8);
+ Buffer = (UINT8 *)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
+ //
+ // Read a word if StartAddress is word aligned
+ //
+ WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16 *)Buffer + 1;
+ }
+
+ while (Size >= sizeof (UINT32)) {
+ //
+ // Read as many double words as possible
+ //
+ WriteUnaligned32 (Buffer, PciSegmentRead32 (StartAddress));
+ StartAddress += sizeof (UINT32);
+ Size -= sizeof (UINT32);
+ Buffer = (UINT32 *)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16)) {
+ //
+ // Read the last remaining word if exist
+ //
+ WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16 *)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT8)) {
+ //
+ // Read the last remaining byte if exist
+ //
+ *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress);
+ }
+
+ return ReturnValue;
+}
+
+/**
+ Copies the data in a caller supplied buffer to a specified range of PCI
+ configuration space.
+
+ Writes the range of PCI configuration registers specified by StartAddress and
+ Size from the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be written. Size is
+ returned. When possible 32-bit PCI configuration write cycles are used to
+ write from StartAddress to StartAddress + Size. Due to alignment restrictions,
+ 8-bit and 16-bit PCI configuration write cycles may be used at the beginning
+ and the end of the range.
+
+ If any reserved bits in StartAddress are set, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress Starting address that encodes the PCI Segment, Bus, Device,
+ Function and Register.
+ @param Size Size in bytes of the transfer.
+ @param Buffer Pointer to a buffer containing the data to write.
+
+ @return The parameter of Size.
+
+**/
+UINTN
+EFIAPI
+PciSegmentWriteBuffer (
+ IN UINT64 StartAddress,
+ IN UINTN Size,
+ IN VOID *Buffer
+ )
+{
+ UINTN ReturnValue;
+
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0);
+ ASSERT (((StartAddress & 0xFFF) + Size) <= SIZE_4KB);
+
+ if (Size == 0) {
+ return Size;
+ }
+
+ ASSERT (Buffer != NULL);
+
+ //
+ // Save Size for return
+ //
+ ReturnValue = Size;
+
+ if ((StartAddress & BIT0) != 0) {
+ //
+ // Write a byte if StartAddress is byte aligned
+ //
+ PciSegmentWrite8 (StartAddress, *(UINT8 *)Buffer);
+ StartAddress += sizeof (UINT8);
+ Size -= sizeof (UINT8);
+ Buffer = (UINT8 *)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
+ //
+ // Write a word if StartAddress is word aligned
+ //
+ PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16 *)Buffer + 1;
+ }
+
+ while (Size >= sizeof (UINT32)) {
+ //
+ // Write as many double words as possible
+ //
+ PciSegmentWrite32 (StartAddress, ReadUnaligned32 (Buffer));
+ StartAddress += sizeof (UINT32);
+ Size -= sizeof (UINT32);
+ Buffer = (UINT32 *)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16)) {
+ //
+ // Write the last remaining word if exist
+ //
+ PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16 *)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT8)) {
+ //
+ // Write the last remaining byte if exist
+ //
+ PciSegmentWrite8 (StartAddress, *(UINT8 *)Buffer);
+ }
+
+ return ReturnValue;
+}
--
2.17.1
next prev parent reply other threads:[~2021-10-22 6:20 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-22 6:17 [edk2-platforms][PATCH v4 00/31] Add new Ampere Mt. Jade platform Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 01/31] Ampere: Initial support for Ampere Altra processor and " Nhi Pham
2021-10-26 11:14 ` Leif Lindholm
2021-11-03 9:31 ` Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 02/31] AmpereAltraPkg: Add FlashLib library instance Nhi Pham
2021-10-26 11:25 ` Leif Lindholm
2021-11-03 9:32 ` Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 03/31] AmpereAltraPkg: Add FailSafe and WDT support Nhi Pham
2021-10-26 12:15 ` Leif Lindholm
2021-11-03 9:35 ` Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 04/31] AmpereAltraPkg: Add DwI2cLib library instance Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 05/31] AmpereAltraPkg: Add DwGpioLib " Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 06/31] JadePkg: Implement RealTimeClockLib for PCF85063 Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 07/31] AmpereAltraPkg: Add BootProgress support Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 08/31] AmpereAltraPkg: Support UEFI non-volatile variable Nhi Pham
2021-10-26 12:21 ` Leif Lindholm
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 09/31] AmpereSiliconPkg: Add PlatformManagerUiLib library instance Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 10/31] AmpereAltraPkg, JadePkg: Add ACPI support Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 11/31] AmpereAltraPkg: Add Root Complex HOB data structures Nhi Pham
2021-10-26 12:23 ` Leif Lindholm
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 12/31] AmpereAltraPkg: Add Ac01PcieLib library instance Nhi Pham
2021-10-26 12:45 ` Leif Lindholm
2021-11-03 9:33 ` Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 13/31] JadePkg: Add BoardPcieLib " Nhi Pham
2021-10-26 12:46 ` Leif Lindholm
2021-11-03 9:33 ` Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 14/31] AmpereAltraPkg: Add driver to initialize PCIe Root Complex Nhi Pham
2021-10-26 12:49 ` Leif Lindholm
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 15/31] AmpereAltraPkg: Add PciHostBridgeLib library instance Nhi Pham
2021-10-26 12:49 ` Leif Lindholm
2021-10-22 6:17 ` Nhi Pham [this message]
2021-10-26 12:53 ` [edk2-platforms][PATCH v4 16/31] AmpereAltraPkg: Add PciSegmentLib " Leif Lindholm
2021-11-03 9:35 ` Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 17/31] JadePkg: Enable PciHostBridgeDxe driver Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 18/31] JadePkg: Add PciPlatformDxe driver Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 19/31] JadePkg: Add ACPI tables to support PCIe Nhi Pham
2021-10-26 12:54 ` Leif Lindholm
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 20/31] JadePkg: Add ASpeed GOP driver Nhi Pham
2021-10-22 6:17 ` [edk2-platforms][PATCH v4 21/31] AmpereAltraPkg: Add Random Number Generator Support Nhi Pham
2021-10-22 6:18 ` [edk2-platforms][PATCH v4 22/31] JadePkg: Add SMBIOS tables support Nhi Pham
2021-10-22 6:18 ` [edk2-platforms][PATCH v4 23/31] AmpereAltraPkg: Add DebugInfoPei module Nhi Pham
2021-10-22 6:18 ` [edk2-platforms][PATCH v4 24/31] AmpereAltraPkg: Add configuration screen for PCIe Nhi Pham
2021-10-26 12:56 ` Leif Lindholm
2021-10-22 6:18 ` [edk2-platforms][PATCH v4 25/31] Ampere: Utilize the PCIe User setting Nhi Pham
2021-10-26 12:57 ` Leif Lindholm
2021-10-22 6:18 ` [edk2-platforms][PATCH v4 26/31] AmpereAltraPkg: Add platform info screen Nhi Pham
2021-10-22 6:18 ` [edk2-platforms][PATCH v4 27/31] AmpereAltraPkg: Add configuration screen for Memory Nhi Pham
2021-10-26 12:58 ` Leif Lindholm
2021-10-22 6:18 ` [edk2-platforms][PATCH v4 28/31] AmpereAltraPkg: Add configuration screen for CPU Nhi Pham
2021-10-22 6:18 ` [edk2-platforms][PATCH v4 29/31] AmpereAltraPkg: Add configuration screen for ACPI Nhi Pham
2021-10-22 6:18 ` [edk2-platforms][PATCH v4 30/31] AmpereAltraPkg: Add configuration screen for RAS Nhi Pham
2021-10-22 6:18 ` [edk2-platforms][PATCH v4 31/31] AmpereAltraPkg: Add configuration screen for Watchdog timer Nhi Pham
2021-10-26 13:03 ` Leif Lindholm
2021-11-03 9:36 ` Nhi Pham
2021-10-26 13:08 ` [edk2-platforms][PATCH v4 00/31] Add new Ampere Mt. Jade platform Leif Lindholm
2021-11-03 9:37 ` Nhi Pham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211022061809.31087-17-nhi@os.amperecomputing.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox