* [PATCH v3 1/8] MdePkg: IORT header update for IORT Rev E.b spec
2021-11-10 10:55 [PATCH v3 0/8] IORT Rev E.b specification updates Sami Mujawar
@ 2021-11-10 10:55 ` Sami Mujawar
2022-02-03 15:24 ` [edk2-devel] " Rebecca Cran
2021-11-10 10:55 ` [PATCH v3 2/8] ShellPkg: Acpiview: Abbreviate field names to preserve alignment Sami Mujawar
` (7 subsequent siblings)
8 siblings, 1 reply; 13+ messages in thread
From: Sami Mujawar @ 2021-11-10 10:55 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, Alexei.Fedorov, ardb+tianocore, pierre.gondois,
Matteo.Carlini, Akanksha.Jain2, Ben.Adderson, steven.price,
Lorenzo.Pieralisi, michael.d.kinney, gaoliming, zhiguang.liu,
ray.ni, zhichao.gao, nd
Bugzilla: 3458 - Add support IORT Rev E.b specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.b,
Feb 2021 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E and Rev E.a:
- increments the IORT table revision to 3.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
Therefore, update the IORT header file to reflect these changes,
and also rename the EFI_ACPI_IO_REMAPPING_TABLE_REVISION macro to
EFI_ACPI_IO_REMAPPING_TABLE_REV0.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
---
Notes:
v2:
- Set EFI_ACPI_IO_REMAPPING_TABLE_REVISION to Rev 0 as [SAMI]
setting to Rev 3 will break existing platforms. The
problem is that existing code would not be populating
the Identifier field in the nodes. This can lead to
non-unique values in the Identifier field.
v3:
- Submit patch series to update platform code to use the [LIMING]
EFI_ACPI_IO_REMAPPING_TABLE_REV0 macro.
Ref: https://edk2.groups.io/g/devel/topic/83618423#76799
- Removed definition of EFI_ACPI_IO_REMAPPING_TABLE_REVISION [SAMI]
as EFI_ACPI_IO_REMAPPING_TABLE_REV0 has been provided for
representing Rev 0. Also, a corresponding patch series
for updating the platforms in edk2-platforms repository
shall be submitted to the edk2 mailing list.
- Include r-b received from v2 series. [SAMI]
Ref: https://edk2.groups.io/g/devel/topic/83600724#76660
MdePkg/Include/IndustryStandard/IoRemappingTable.h | 66 +++++++++++++++++---
1 file changed, 59 insertions(+), 7 deletions(-)
diff --git a/MdePkg/Include/IndustryStandard/IoRemappingTable.h b/MdePkg/Include/IndustryStandard/IoRemappingTable.h
index 90504e3a6715be7facc6450c6ff0e1eab92cd3c7..e80164a07f4d561cd85994b4f785e76f2eab4586 100644
--- a/MdePkg/Include/IndustryStandard/IoRemappingTable.h
+++ b/MdePkg/Include/IndustryStandard/IoRemappingTable.h
@@ -1,12 +1,19 @@
/** @file
- ACPI IO Remapping Table (IORT) as specified in ARM spec DEN0049D
-
- http://infocenter.arm.com/help/topic/com.arm.doc.den0049d/DEN0049D_IO_Remapping_Table.pdf
+ ACPI IO Remapping Table (IORT) definitions.
Copyright (c) 2017, Linaro Limited. All rights reserved.<BR>
- Copyright (c) 2018, ARM Limited. All rights reserved.<BR>
+ Copyright (c) 2018 - 2021, Arm Limited. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Reference(s):
+ - IO Remapping Table, Platform Design Document, Revision E.b, Feb 2021
+ (https://developer.arm.com/documentation/den0049/)
+
+ @par Glossary:
+ - Ref : Reference
+ - Mem : Memory
+ - Desc : Descriptor
**/
#ifndef __IO_REMAPPING_TABLE_H__
@@ -14,7 +21,8 @@
#include <IndustryStandard/Acpi.h>
-#define EFI_ACPI_IO_REMAPPING_TABLE_REVISION 0x0
+#define EFI_ACPI_IO_REMAPPING_TABLE_REV0 0x0
+#define EFI_ACPI_IO_REMAPPING_TABLE_REV3 0x3
#define EFI_ACPI_IORT_TYPE_ITS_GROUP 0x0
#define EFI_ACPI_IORT_TYPE_NAMED_COMP 0x1
@@ -22,6 +30,7 @@
#define EFI_ACPI_IORT_TYPE_SMMUv1v2 0x3
#define EFI_ACPI_IORT_TYPE_SMMUv3 0x4
#define EFI_ACPI_IORT_TYPE_PMCG 0x5
+#define EFI_ACPI_IORT_TYPE_RMR 0x6
#define EFI_ACPI_IORT_MEM_ACCESS_PROP_CCA BIT0
@@ -55,7 +64,16 @@
#define EFI_ACPI_IORT_SMMUv3_MODEL_CAVIUM_CN99XX 0x2
#define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_UNSUPPORTED 0x0
-#define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_SUPPORTED 0x1
+#define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_SUPPORTED BIT0
+
+#define EFI_ACPI_IORT_ROOT_COMPLEX_PRI_UNSUPPORTED 0x0
+#define EFI_ACPI_IORT_ROOT_COMPLEX_PRI_SUPPORTED BIT1
+
+#define EFI_ACPI_IORT_ROOT_COMPLEX_PASID_FWD_UNSUPPORTED 0x0
+#define EFI_ACPI_IORT_ROOT_COMPLEX_PASID_FWD_SUPPORTED BIT2
+
+#define EFI_ACPI_IORT_RMR_REMAP_NOT_PERMITTED 0x0
+#define EFI_ACPI_IORT_RMR_REMAP_PERMITTED BIT0
#define EFI_ACPI_IORT_ID_MAPPING_FLAGS_SINGLE BIT0
@@ -89,7 +107,7 @@ typedef struct {
UINT8 Type;
UINT16 Length;
UINT8 Revision;
- UINT32 Reserved;
+ UINT32 Identifier;
UINT32 NumIdMappings;
UINT32 IdReference;
} EFI_ACPI_6_0_IO_REMAPPING_NODE;
@@ -198,6 +216,40 @@ typedef struct {
//EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE OverflowInterruptMsiMapping[1];
} EFI_ACPI_6_0_IO_REMAPPING_PMCG_NODE;
+///
+/// Memory Range Descriptor.
+///
+typedef struct {
+ /// Base address of Reserved Memory Range,
+ /// aligned to a page size of 64K.
+ UINT64 Base;
+
+ /// Length of the Reserved Memory range.
+ /// Must be a multiple of the page size of 64K.
+ UINT64 Length;
+
+ /// Reserved, must be zero.
+ UINT32 Reserved;
+} EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC;
+
+///
+/// Node type 6: Reserved Memory Range (RMR) node
+///
+typedef struct {
+ EFI_ACPI_6_0_IO_REMAPPING_NODE Node;
+
+ /// RMR flags
+ UINT32 Flags;
+
+ /// Memory range descriptor count.
+ UINT32 NumMemRangeDesc;
+
+ /// Offset of the memory range descriptor array.
+ UINT32 MemRangeDescRef;
+// EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE IdMapping[1];
+// EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC MemRangeDesc[1];
+} EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE;
+
#pragma pack()
#endif
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [edk2-devel] [PATCH v3 1/8] MdePkg: IORT header update for IORT Rev E.b spec
2021-11-10 10:55 ` [PATCH v3 1/8] MdePkg: IORT header update for IORT Rev E.b spec Sami Mujawar
@ 2022-02-03 15:24 ` Rebecca Cran
2022-02-03 16:04 ` Sami Mujawar
0 siblings, 1 reply; 13+ messages in thread
From: Rebecca Cran @ 2022-02-03 15:24 UTC (permalink / raw)
To: devel, sami.mujawar
Cc: Alexei.Fedorov, ardb+tianocore, pierre.gondois, Matteo.Carlini,
Akanksha.Jain2, Ben.Adderson, steven.price, Lorenzo.Pieralisi,
michael.d.kinney, gaoliming, zhiguang.liu, ray.ni, zhichao.gao,
nd
Reviewed-by: Rebecca Cran <quic_rcran@quicinc.com>
On 11/10/21 03:55, Sami Mujawar wrote:
> Bugzilla: 3458 - Add support IORT Rev E.b specification updates
> (https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
>
> The IO Remapping Table, Platform Design Document, Revision E.b,
> Feb 2021 (https://developer.arm.com/documentation/den0049/)
> introduces the following updates, collectively including the
> updates and errata fixes to Rev E and Rev E.a:
> - increments the IORT table revision to 3.
> - updates the node definition to add an 'Identifier' field.
> - adds definition of node type 6 - Reserved Memory Range node.
> - adds definition for Memory Range Descriptors.
> - adds flag to indicate PRI support for root complexes.
> - adds flag to indicate if the root complex supports forwarding
> of PASID information on translated transactions to the SMMU.
>
> Therefore, update the IORT header file to reflect these changes,
> and also rename the EFI_ACPI_IO_REMAPPING_TABLE_REVISION macro to
> EFI_ACPI_IO_REMAPPING_TABLE_REV0.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
> ---
>
> Notes:
> v2:
> - Set EFI_ACPI_IO_REMAPPING_TABLE_REVISION to Rev 0 as [SAMI]
> setting to Rev 3 will break existing platforms. The
> problem is that existing code would not be populating
> the Identifier field in the nodes. This can lead to
> non-unique values in the Identifier field.
>
> v3:
> - Submit patch series to update platform code to use the [LIMING]
> EFI_ACPI_IO_REMAPPING_TABLE_REV0 macro.
> Ref: https://edk2.groups.io/g/devel/topic/83618423#76799
> - Removed definition of EFI_ACPI_IO_REMAPPING_TABLE_REVISION [SAMI]
> as EFI_ACPI_IO_REMAPPING_TABLE_REV0 has been provided for
> representing Rev 0. Also, a corresponding patch series
> for updating the platforms in edk2-platforms repository
> shall be submitted to the edk2 mailing list.
> - Include r-b received from v2 series. [SAMI]
> Ref: https://edk2.groups.io/g/devel/topic/83600724#76660
>
> MdePkg/Include/IndustryStandard/IoRemappingTable.h | 66 +++++++++++++++++---
> 1 file changed, 59 insertions(+), 7 deletions(-)
>
> diff --git a/MdePkg/Include/IndustryStandard/IoRemappingTable.h b/MdePkg/Include/IndustryStandard/IoRemappingTable.h
> index 90504e3a6715be7facc6450c6ff0e1eab92cd3c7..e80164a07f4d561cd85994b4f785e76f2eab4586 100644
> --- a/MdePkg/Include/IndustryStandard/IoRemappingTable.h
> +++ b/MdePkg/Include/IndustryStandard/IoRemappingTable.h
> @@ -1,12 +1,19 @@
> /** @file
> - ACPI IO Remapping Table (IORT) as specified in ARM spec DEN0049D
> -
> - http://infocenter.arm.com/help/topic/com.arm.doc.den0049d/DEN0049D_IO_Remapping_Table.pdf
> + ACPI IO Remapping Table (IORT) definitions.
>
> Copyright (c) 2017, Linaro Limited. All rights reserved.<BR>
> - Copyright (c) 2018, ARM Limited. All rights reserved.<BR>
> + Copyright (c) 2018 - 2021, Arm Limited. All rights reserved.<BR>
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + @par Reference(s):
> + - IO Remapping Table, Platform Design Document, Revision E.b, Feb 2021
> + (https://developer.arm.com/documentation/den0049/)
> +
> + @par Glossary:
> + - Ref : Reference
> + - Mem : Memory
> + - Desc : Descriptor
> **/
>
> #ifndef __IO_REMAPPING_TABLE_H__
> @@ -14,7 +21,8 @@
>
> #include <IndustryStandard/Acpi.h>
>
> -#define EFI_ACPI_IO_REMAPPING_TABLE_REVISION 0x0
> +#define EFI_ACPI_IO_REMAPPING_TABLE_REV0 0x0
> +#define EFI_ACPI_IO_REMAPPING_TABLE_REV3 0x3
>
> #define EFI_ACPI_IORT_TYPE_ITS_GROUP 0x0
> #define EFI_ACPI_IORT_TYPE_NAMED_COMP 0x1
> @@ -22,6 +30,7 @@
> #define EFI_ACPI_IORT_TYPE_SMMUv1v2 0x3
> #define EFI_ACPI_IORT_TYPE_SMMUv3 0x4
> #define EFI_ACPI_IORT_TYPE_PMCG 0x5
> +#define EFI_ACPI_IORT_TYPE_RMR 0x6
>
> #define EFI_ACPI_IORT_MEM_ACCESS_PROP_CCA BIT0
>
> @@ -55,7 +64,16 @@
> #define EFI_ACPI_IORT_SMMUv3_MODEL_CAVIUM_CN99XX 0x2
>
> #define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_UNSUPPORTED 0x0
> -#define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_SUPPORTED 0x1
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_SUPPORTED BIT0
> +
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PRI_UNSUPPORTED 0x0
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PRI_SUPPORTED BIT1
> +
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PASID_FWD_UNSUPPORTED 0x0
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PASID_FWD_SUPPORTED BIT2
> +
> +#define EFI_ACPI_IORT_RMR_REMAP_NOT_PERMITTED 0x0
> +#define EFI_ACPI_IORT_RMR_REMAP_PERMITTED BIT0
>
> #define EFI_ACPI_IORT_ID_MAPPING_FLAGS_SINGLE BIT0
>
> @@ -89,7 +107,7 @@ typedef struct {
> UINT8 Type;
> UINT16 Length;
> UINT8 Revision;
> - UINT32 Reserved;
> + UINT32 Identifier;
> UINT32 NumIdMappings;
> UINT32 IdReference;
> } EFI_ACPI_6_0_IO_REMAPPING_NODE;
> @@ -198,6 +216,40 @@ typedef struct {
> //EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE OverflowInterruptMsiMapping[1];
> } EFI_ACPI_6_0_IO_REMAPPING_PMCG_NODE;
>
> +///
> +/// Memory Range Descriptor.
> +///
> +typedef struct {
> + /// Base address of Reserved Memory Range,
> + /// aligned to a page size of 64K.
> + UINT64 Base;
> +
> + /// Length of the Reserved Memory range.
> + /// Must be a multiple of the page size of 64K.
> + UINT64 Length;
> +
> + /// Reserved, must be zero.
> + UINT32 Reserved;
> +} EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC;
> +
> +///
> +/// Node type 6: Reserved Memory Range (RMR) node
> +///
> +typedef struct {
> + EFI_ACPI_6_0_IO_REMAPPING_NODE Node;
> +
> + /// RMR flags
> + UINT32 Flags;
> +
> + /// Memory range descriptor count.
> + UINT32 NumMemRangeDesc;
> +
> + /// Offset of the memory range descriptor array.
> + UINT32 MemRangeDescRef;
> +// EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE IdMapping[1];
> +// EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC MemRangeDesc[1];
> +} EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE;
> +
> #pragma pack()
>
> #endif
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [edk2-devel] [PATCH v3 1/8] MdePkg: IORT header update for IORT Rev E.b spec
2022-02-03 15:24 ` [edk2-devel] " Rebecca Cran
@ 2022-02-03 16:04 ` Sami Mujawar
0 siblings, 0 replies; 13+ messages in thread
From: Sami Mujawar @ 2022-02-03 16:04 UTC (permalink / raw)
To: devel@edk2.groups.io, quic_rcran@quicinc.com
Cc: Alexei Fedorov, ardb+tianocore@kernel.org, Pierre Gondois,
Matteo Carlini, Akanksha Jain, Ben Adderson, Steven Price,
Lorenzo Pieralisi, michael.d.kinney@intel.com,
gaoliming@byosoft.com.cn, zhiguang.liu@intel.com,
ray.ni@intel.com, zhichao.gao@intel.com, nd
Hi All,
We are going to skip the IORT Rev E.b and E.c. I will be submitting a new patch series, so please ignore this series.
Regards,
Sami Mujawar
On 03/02/2022, 15:24, "devel@edk2.groups.io on behalf of Rebecca Cran via groups.io" <devel@edk2.groups.io on behalf of quic_rcran=quicinc.com@groups.io> wrote:
Reviewed-by: Rebecca Cran <quic_rcran@quicinc.com>
On 11/10/21 03:55, Sami Mujawar wrote:
> Bugzilla: 3458 - Add support IORT Rev E.b specification updates
> (https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
>
> The IO Remapping Table, Platform Design Document, Revision E.b,
> Feb 2021 (https://developer.arm.com/documentation/den0049/)
> introduces the following updates, collectively including the
> updates and errata fixes to Rev E and Rev E.a:
> - increments the IORT table revision to 3.
> - updates the node definition to add an 'Identifier' field.
> - adds definition of node type 6 - Reserved Memory Range node.
> - adds definition for Memory Range Descriptors.
> - adds flag to indicate PRI support for root complexes.
> - adds flag to indicate if the root complex supports forwarding
> of PASID information on translated transactions to the SMMU.
>
> Therefore, update the IORT header file to reflect these changes,
> and also rename the EFI_ACPI_IO_REMAPPING_TABLE_REVISION macro to
> EFI_ACPI_IO_REMAPPING_TABLE_REV0.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
> ---
>
> Notes:
> v2:
> - Set EFI_ACPI_IO_REMAPPING_TABLE_REVISION to Rev 0 as [SAMI]
> setting to Rev 3 will break existing platforms. The
> problem is that existing code would not be populating
> the Identifier field in the nodes. This can lead to
> non-unique values in the Identifier field.
>
> v3:
> - Submit patch series to update platform code to use the [LIMING]
> EFI_ACPI_IO_REMAPPING_TABLE_REV0 macro.
> Ref: https://edk2.groups.io/g/devel/topic/83618423#76799
> - Removed definition of EFI_ACPI_IO_REMAPPING_TABLE_REVISION [SAMI]
> as EFI_ACPI_IO_REMAPPING_TABLE_REV0 has been provided for
> representing Rev 0. Also, a corresponding patch series
> for updating the platforms in edk2-platforms repository
> shall be submitted to the edk2 mailing list.
> - Include r-b received from v2 series. [SAMI]
> Ref: https://edk2.groups.io/g/devel/topic/83600724#76660
>
> MdePkg/Include/IndustryStandard/IoRemappingTable.h | 66 +++++++++++++++++---
> 1 file changed, 59 insertions(+), 7 deletions(-)
>
> diff --git a/MdePkg/Include/IndustryStandard/IoRemappingTable.h b/MdePkg/Include/IndustryStandard/IoRemappingTable.h
> index 90504e3a6715be7facc6450c6ff0e1eab92cd3c7..e80164a07f4d561cd85994b4f785e76f2eab4586 100644
> --- a/MdePkg/Include/IndustryStandard/IoRemappingTable.h
> +++ b/MdePkg/Include/IndustryStandard/IoRemappingTable.h
> @@ -1,12 +1,19 @@
> /** @file
> - ACPI IO Remapping Table (IORT) as specified in ARM spec DEN0049D
> -
> - http://infocenter.arm.com/help/topic/com.arm.doc.den0049d/DEN0049D_IO_Remapping_Table.pdf
> + ACPI IO Remapping Table (IORT) definitions.
>
> Copyright (c) 2017, Linaro Limited. All rights reserved.<BR>
> - Copyright (c) 2018, ARM Limited. All rights reserved.<BR>
> + Copyright (c) 2018 - 2021, Arm Limited. All rights reserved.<BR>
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + @par Reference(s):
> + - IO Remapping Table, Platform Design Document, Revision E.b, Feb 2021
> + (https://developer.arm.com/documentation/den0049/)
> +
> + @par Glossary:
> + - Ref : Reference
> + - Mem : Memory
> + - Desc : Descriptor
> **/
>
> #ifndef __IO_REMAPPING_TABLE_H__
> @@ -14,7 +21,8 @@
>
> #include <IndustryStandard/Acpi.h>
>
> -#define EFI_ACPI_IO_REMAPPING_TABLE_REVISION 0x0
> +#define EFI_ACPI_IO_REMAPPING_TABLE_REV0 0x0
> +#define EFI_ACPI_IO_REMAPPING_TABLE_REV3 0x3
>
> #define EFI_ACPI_IORT_TYPE_ITS_GROUP 0x0
> #define EFI_ACPI_IORT_TYPE_NAMED_COMP 0x1
> @@ -22,6 +30,7 @@
> #define EFI_ACPI_IORT_TYPE_SMMUv1v2 0x3
> #define EFI_ACPI_IORT_TYPE_SMMUv3 0x4
> #define EFI_ACPI_IORT_TYPE_PMCG 0x5
> +#define EFI_ACPI_IORT_TYPE_RMR 0x6
>
> #define EFI_ACPI_IORT_MEM_ACCESS_PROP_CCA BIT0
>
> @@ -55,7 +64,16 @@
> #define EFI_ACPI_IORT_SMMUv3_MODEL_CAVIUM_CN99XX 0x2
>
> #define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_UNSUPPORTED 0x0
> -#define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_SUPPORTED 0x1
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_ATS_SUPPORTED BIT0
> +
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PRI_UNSUPPORTED 0x0
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PRI_SUPPORTED BIT1
> +
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PASID_FWD_UNSUPPORTED 0x0
> +#define EFI_ACPI_IORT_ROOT_COMPLEX_PASID_FWD_SUPPORTED BIT2
> +
> +#define EFI_ACPI_IORT_RMR_REMAP_NOT_PERMITTED 0x0
> +#define EFI_ACPI_IORT_RMR_REMAP_PERMITTED BIT0
>
> #define EFI_ACPI_IORT_ID_MAPPING_FLAGS_SINGLE BIT0
>
> @@ -89,7 +107,7 @@ typedef struct {
> UINT8 Type;
> UINT16 Length;
> UINT8 Revision;
> - UINT32 Reserved;
> + UINT32 Identifier;
> UINT32 NumIdMappings;
> UINT32 IdReference;
> } EFI_ACPI_6_0_IO_REMAPPING_NODE;
> @@ -198,6 +216,40 @@ typedef struct {
> //EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE OverflowInterruptMsiMapping[1];
> } EFI_ACPI_6_0_IO_REMAPPING_PMCG_NODE;
>
> +///
> +/// Memory Range Descriptor.
> +///
> +typedef struct {
> + /// Base address of Reserved Memory Range,
> + /// aligned to a page size of 64K.
> + UINT64 Base;
> +
> + /// Length of the Reserved Memory range.
> + /// Must be a multiple of the page size of 64K.
> + UINT64 Length;
> +
> + /// Reserved, must be zero.
> + UINT32 Reserved;
> +} EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC;
> +
> +///
> +/// Node type 6: Reserved Memory Range (RMR) node
> +///
> +typedef struct {
> + EFI_ACPI_6_0_IO_REMAPPING_NODE Node;
> +
> + /// RMR flags
> + UINT32 Flags;
> +
> + /// Memory range descriptor count.
> + UINT32 NumMemRangeDesc;
> +
> + /// Offset of the memory range descriptor array.
> + UINT32 MemRangeDescRef;
> +// EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE IdMapping[1];
> +// EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC MemRangeDesc[1];
> +} EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE;
> +
> #pragma pack()
>
> #endif
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 2/8] ShellPkg: Acpiview: Abbreviate field names to preserve alignment
2021-11-10 10:55 [PATCH v3 0/8] IORT Rev E.b specification updates Sami Mujawar
2021-11-10 10:55 ` [PATCH v3 1/8] MdePkg: IORT header update for IORT Rev E.b spec Sami Mujawar
@ 2021-11-10 10:55 ` Sami Mujawar
2021-11-10 10:55 ` [PATCH v3 3/8] ShellPkg: Acpiview: IORT parser update for IORT Rev E.b spec Sami Mujawar
` (6 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Sami Mujawar @ 2021-11-10 10:55 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, Alexei.Fedorov, pierre.gondois, Matteo.Carlini,
Akanksha.Jain2, Ben.Adderson, ray.ni, zhichao.gao, nd
Some field names in the IORT table parser were longer than the
OUTPUT_FIELD_COLUMN_WIDTH plus indentation, resulting in loss of
the output print alignment. Therefore, abbreviate the field names.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
---
Notes:
v2:
- No code change since v1. Re-sending with v2 series. [SAMI]
v3:
- No code change since v1. Include r-b received [SAMI]
from v2 series.
Ref: https://edk2.groups.io/g/devel/topic/83600717#76655
ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Iort/IortParser.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Iort/IortParser.c b/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Iort/IortParser.c
index f7447947b2308d35d4d2890373778f0fd2f97f9e..fcecaff5134256497bda87241f339076897c3ece 100644
--- a/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Iort/IortParser.c
+++ b/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Iort/IortParser.c
@@ -1,11 +1,14 @@
/** @file
IORT table parser
- Copyright (c) 2016 - 2020, ARM Limited. All rights reserved.
+ Copyright (c) 2016 - 2021, Arm Limited. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent
@par Reference(s):
- - IO Remapping Table, Platform Design Document, Revision D, March 2018
+ - IO Remapping Table, Platform Design Document, Revision D, March 2018
+
+ @par Glossary:
+ - Ref - Reference
**/
#include <IndustryStandard/IoRemappingTable.h>
@@ -144,15 +147,15 @@ STATIC CONST ACPI_PARSER IortNodeSmmuV1V2Parser[] = {
{L"Span", 8, 24, L"0x%lx", NULL, NULL, NULL, NULL},
{L"Model", 4, 32, L"%d", NULL, NULL, NULL, NULL},
{L"Flags", 4, 36, L"0x%x", NULL, NULL, NULL, NULL},
- {L"Reference to Global Interrupt Array", 4, 40, L"0x%x", NULL, NULL, NULL,
+ {L"Global Interrupt Array Ref", 4, 40, L"0x%x", NULL, NULL, NULL,
NULL},
{L"Number of context interrupts", 4, 44, L"%d", NULL,
(VOID**)&InterruptContextCount, NULL, NULL},
- {L"Reference to Context Interrupt Array", 4, 48, L"0x%x", NULL,
+ {L"Context Interrupt Array Ref", 4, 48, L"0x%x", NULL,
(VOID**)&InterruptContextOffset, NULL, NULL},
{L"Number of PMU Interrupts", 4, 52, L"%d", NULL,
(VOID**)&PmuInterruptCount, NULL, NULL},
- {L"Reference to PMU Interrupt Array", 4, 56, L"0x%x", NULL,
+ {L"PMU Interrupt Array Ref", 4, 56, L"0x%x", NULL,
(VOID**)&PmuInterruptOffset, NULL, NULL},
// Interrupt Array
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 3/8] ShellPkg: Acpiview: IORT parser update for IORT Rev E.b spec
2021-11-10 10:55 [PATCH v3 0/8] IORT Rev E.b specification updates Sami Mujawar
2021-11-10 10:55 ` [PATCH v3 1/8] MdePkg: IORT header update for IORT Rev E.b spec Sami Mujawar
2021-11-10 10:55 ` [PATCH v3 2/8] ShellPkg: Acpiview: Abbreviate field names to preserve alignment Sami Mujawar
@ 2021-11-10 10:55 ` Sami Mujawar
2021-11-10 10:55 ` [PATCH v3 4/8] DynamicTablesPkg: Handle error when IdMappingToken is NULL Sami Mujawar
` (5 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Sami Mujawar @ 2021-11-10 10:55 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, Alexei.Fedorov, pierre.gondois, steven.price,
Lorenzo.Pieralisi, Matteo.Carlini, Akanksha.Jain2, Ben.Adderson,
ray.ni, zhichao.gao, nd
Bugzilla: 3458 - Add support IORT Rev E.b specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.b,
Feb 2021 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E and Rev E.a:
- increments the IORT table revision to 3.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
Therefore, update the IORT parser to:
- parse the Identifier field.
- parse Reserved Memory Range node.
- parse Memory Range Descriptors.
- add validations to check that the physical range base
and size of the Memory Range Descriptor is 64KB aligned.
- add validation to check that the ID mapping count is
set to 1.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
---
Notes:
v2:
- No code change since v1. Re-sending with v2 series. [SAMI]
v3:
- No code change since v1. Included r-b received for [SAMI]
v2 series.
Ref: https://edk2.groups.io/g/devel/topic/83600720#76658
ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Iort/IortParser.c | 196 +++++++++++++++++++-
1 file changed, 191 insertions(+), 5 deletions(-)
diff --git a/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Iort/IortParser.c b/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Iort/IortParser.c
index fcecaff5134256497bda87241f339076897c3ece..1507dd3a4d79e61024b0c5526e21ffdacb782251 100644
--- a/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Iort/IortParser.c
+++ b/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Iort/IortParser.c
@@ -5,10 +5,12 @@
SPDX-License-Identifier: BSD-2-Clause-Patent
@par Reference(s):
- - IO Remapping Table, Platform Design Document, Revision D, March 2018
+ - IO Remapping Table, Platform Design Document, Revision E.b, Feb 2021
+ (https://developer.arm.com/documentation/den0049/)
@par Glossary:
- Ref - Reference
+ - Desc - Descriptor
**/
#include <IndustryStandard/IoRemappingTable.h>
@@ -36,6 +38,9 @@ STATIC CONST UINT32* PmuInterruptOffset;
STATIC CONST UINT32* ItsCount;
+STATIC CONST UINT32* RmrMemDescCount;
+STATIC CONST UINT32* RmrMemDescOffset;
+
/**
This function validates the ID Mapping array count for the ITS node.
@@ -100,6 +105,72 @@ ValidateItsIdArrayReference (
}
}
+/**
+ This function validates that the address or length is 64K aligned.
+
+ @param [in] Ptr Pointer to the start of the field data.
+ @param [in] Context Pointer to context specific information e.g. this
+ could be a pointer to the ACPI table header.
+**/
+STATIC
+VOID
+EFIAPI
+Validate64KAlignment (
+ IN UINT8* Ptr,
+ IN VOID* Context
+ )
+{
+ UINT64 Address;
+ Address = *(UINT64*)Ptr;
+ if ((Address & (SIZE_64KB - 1)) != 0) {
+ IncrementErrorCount ();
+ Print (L"\nERROR: Value must be 64K aligned.");
+ }
+}
+
+/**
+ This function validates that the RMR memory range descriptor count.
+
+ @param [in] Ptr Pointer to the start of the field data.
+ @param [in] Context Pointer to context specific information e.g. this
+ could be a pointer to the ACPI table header.
+**/
+STATIC
+VOID
+EFIAPI
+ValidateRmrMemDescCount (
+ IN UINT8* Ptr,
+ IN VOID* Context
+ )
+{
+ if (*(UINT32*)Ptr == 0) {
+ IncrementErrorCount ();
+ Print (L"\nERROR: Memory Range Descriptor count must be >=1.");
+ }
+}
+
+/**
+ This function validates the ID Mapping array count for the Reserved
+ Memory Range (RMR) node.
+
+ @param [in] Ptr Pointer to the start of the field data.
+ @param [in] Context Pointer to context specific information e.g. this
+ could be a pointer to the ACPI table header.
+**/
+STATIC
+VOID
+EFIAPI
+ValidateRmrIdMappingCount (
+ IN UINT8* Ptr,
+ IN VOID* Context
+ )
+{
+ if (*(UINT32*)Ptr != 1) {
+ IncrementErrorCount ();
+ Print (L"\nERROR: IORT ID Mapping count must be set to 1.");
+ }
+}
+
/**
Helper Macro for populating the IORT Node header in the ACPI_PARSER array.
@@ -113,7 +184,7 @@ ValidateItsIdArrayReference (
{ L"Type", 1, 0, L"%d", NULL, (VOID**)&IortNodeType, NULL, NULL }, \
{ L"Length", 2, 1, L"%d", NULL, (VOID**)&IortNodeLength, NULL, NULL }, \
{ L"Revision", 1, 3, L"%d", NULL, NULL, NULL, NULL }, \
- { L"Reserved", 4, 4, L"0x%x", NULL, NULL, NULL, NULL }, \
+ { L"Identifier", 4, 4, L"0x%x", NULL, NULL, NULL, NULL }, \
{ L"Number of ID mappings", 4, 8, L"%d", NULL, \
(VOID**)&IortIdMappingCount, ValidateIdMappingCount, NULL }, \
{ L"Reference to ID Array", 4, 12, L"0x%x", NULL, \
@@ -253,6 +324,29 @@ STATIC CONST ACPI_PARSER IortNodePmcgParser[] = {
{L"Page 1 Base Address", 8, 32, L"0x%lx", NULL, NULL, NULL, NULL}
};
+/**
+ An ACPI_PARSER array describing the IORT RMR node.
+**/
+STATIC CONST ACPI_PARSER IortNodeRmrParser[] = {
+ PARSE_IORT_NODE_HEADER (ValidateRmrIdMappingCount, NULL),
+ {L"Flags", 4, 16, L"0x%x", NULL, NULL, NULL, NULL},
+ {L"Memory Range Desc count", 4, 20, L"%d", NULL,
+ (VOID**)&RmrMemDescCount, ValidateRmrMemDescCount, NULL},
+ {L"Memory Range Desc Ref", 4, 24, L"0x%x", NULL,
+ (VOID**)&RmrMemDescOffset, NULL, NULL}
+};
+
+/**
+ An ACPI_PARSER array describing the IORT RMR Memory Range Descriptor.
+**/
+STATIC CONST ACPI_PARSER IortNodeRmrMemRangeDescParser[] = {
+ {L"Physical Range offset", 8, 0, L"0x%lx", NULL, NULL, Validate64KAlignment,
+ NULL},
+ {L"Physical Range length", 8, 8, L"0x%lx", NULL, NULL, Validate64KAlignment,
+ NULL},
+ {L"Reserved", 4, 16, L"0x%x", NULL, NULL, NULL, NULL}
+};
+
/**
This function parses the IORT Node Id Mapping array.
@@ -601,9 +695,93 @@ DumpIortNodePmcg (
);
}
+/**
+ This function parses the IORT RMR Node Memory Range Descriptor array.
+
+ @param [in] Ptr Pointer to the start of the Memory Range Descriptor
+ array.
+ @param [in] Length Length of the buffer.
+ @param [in] DescCount Memory Range Descriptor count.
+**/
+STATIC
+VOID
+DumpIortNodeRmrMemRangeDesc (
+ IN UINT8* Ptr,
+ IN UINT32 Length,
+ IN UINT32 DescCount
+ )
+{
+ UINT32 Index;
+ UINT32 Offset;
+ CHAR8 Buffer[40]; // Used for AsciiName param of ParseAcpi
+
+ Index = 0;
+ Offset = 0;
+
+ while ((Index < DescCount) &&
+ (Offset < Length)) {
+ AsciiSPrint (
+ Buffer,
+ sizeof (Buffer),
+ "Mem range Descriptor [%d]",
+ Index
+ );
+ Offset += ParseAcpi (
+ TRUE,
+ 4,
+ Buffer,
+ Ptr + Offset,
+ Length - Offset,
+ PARSER_PARAMS (IortNodeRmrMemRangeDescParser)
+ );
+ Index++;
+ }
+}
+
+/**
+ This function parses the IORT RMR node.
+
+ @param [in] Ptr Pointer to the start of the buffer.
+ @param [in] Length Length of the buffer.
+ @param [in] MappingCount The ID Mapping count.
+ @param [in] MappingOffset The offset of the ID Mapping array
+ from the start of the IORT table.
+**/
+STATIC
+VOID
+DumpIortNodeRmr (
+ IN UINT8* Ptr,
+ IN UINT16 Length,
+ IN UINT32 MappingCount,
+ IN UINT32 MappingOffset
+)
+{
+ ParseAcpi (
+ TRUE,
+ 2,
+ "RMR Node",
+ Ptr,
+ Length,
+ PARSER_PARAMS (IortNodeRmrParser)
+ );
+
+ DumpIortNodeIdMappings (
+ Ptr + MappingOffset,
+ Length - MappingOffset,
+ MappingCount
+ );
+
+ DumpIortNodeRmrMemRangeDesc (
+ Ptr + (*RmrMemDescOffset),
+ Length - (*RmrMemDescOffset),
+ *RmrMemDescCount
+ );
+}
+
/**
This function parses the ACPI IORT table.
- When trace is enabled this function parses the IORT table and traces the ACPI fields.
+ When trace is enabled this function parses the IORT table and traces the ACPI
+ fields.
This function also parses the following nodes:
- ITS Group
@@ -612,6 +790,7 @@ DumpIortNodePmcg (
- SMMUv1/2
- SMMUv3
- PMCG
+ - RMR
This function also performs validation of the ACPI table fields.
@@ -753,9 +932,16 @@ ParseAcpiIort (
*IortNodeLength,
*IortIdMappingCount,
*IortIdMappingOffset
- );
+ );
+ break;
+ case EFI_ACPI_IORT_TYPE_RMR:
+ DumpIortNodeRmr (
+ NodePtr,
+ *IortNodeLength,
+ *IortIdMappingCount,
+ *IortIdMappingOffset
+ );
break;
-
default:
IncrementErrorCount ();
Print (L"ERROR: Unsupported IORT Node type = %d\n", *IortNodeType);
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 4/8] DynamicTablesPkg: Handle error when IdMappingToken is NULL
2021-11-10 10:55 [PATCH v3 0/8] IORT Rev E.b specification updates Sami Mujawar
` (2 preceding siblings ...)
2021-11-10 10:55 ` [PATCH v3 3/8] ShellPkg: Acpiview: IORT parser update for IORT Rev E.b spec Sami Mujawar
@ 2021-11-10 10:55 ` Sami Mujawar
2021-11-10 10:55 ` [PATCH v3 5/8] DynamicTablesPkg: IORT set reference to Id array only if present Sami Mujawar
` (4 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Sami Mujawar @ 2021-11-10 10:55 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, Alexei.Fedorov, pierre.gondois, Matteo.Carlini,
Akanksha.Jain2, Ben.Adderson, nd
Add error handling when the IdMappingCount is not zero and the
IdMappingToken is NULL.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
Notes:
v3:
- New patch in this series. Moves error handling code for [SAMI]
IdMappingToken from patch v2 6/8 and v2 8/8 into this
patch.
Ref: https://edk2.groups.io/g/devel/topic/83600728#76662
https://edk2.groups.io/g/devel/topic/83600726#76661
DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c | 75 +++++++++++++++++---
1 file changed, 65 insertions(+), 10 deletions(-)
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
index 349caa8006bc34ca789cb3e321a0f87c0cd4ff0d..a1714dbedd3e34e2716e828092aac169461c43c9 100644
--- a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
@@ -899,8 +899,19 @@ AddNamedComponentNodes (
return Status;
}
- if ((NodeList->IdMappingCount > 0) &&
- (NodeList->IdMappingToken != CM_NULL_TOKEN)) {
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
// Ids for Named Component
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)NcNode +
NcNode->Node.IdReference);
@@ -1004,8 +1015,19 @@ AddRootComplexNodes (
RcNode->Reserved1[1] = EFI_ACPI_RESERVED_BYTE;
RcNode->Reserved1[2] = EFI_ACPI_RESERVED_BYTE;
- if ((NodeList->IdMappingCount > 0) &&
- (NodeList->IdMappingToken != CM_NULL_TOKEN)) {
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
// Ids for Root Complex
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)RcNode +
RcNode->Node.IdReference);
@@ -1233,8 +1255,19 @@ AddSmmuV1V2Nodes (
}
}
- if ((NodeList->IdMappingCount > 0) &&
- (NodeList->IdMappingToken != CM_NULL_TOKEN)) {
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
// Ids for SMMU v1/v2 Node
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)SmmuNode +
SmmuNode->Node.IdReference);
@@ -1349,8 +1382,19 @@ AddSmmuV3Nodes (
SmmuV3Node->DeviceIdMappingIndex = NodeList->DeviceIdMappingIndex;
}
- if ((NodeList->IdMappingCount > 0) &&
- (NodeList->IdMappingToken != CM_NULL_TOKEN)) {
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
// Ids for SMMUv3 node
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)SmmuV3Node +
SmmuV3Node->Node.IdReference);
@@ -1463,8 +1507,19 @@ AddPmcgNodes (
return Status;
}
- if ((NodeList->IdMappingCount > 0) &&
- (NodeList->IdMappingToken != CM_NULL_TOKEN)) {
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
// Ids for PMCG node
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)PmcgNode +
PmcgNode->Node.IdReference);
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 5/8] DynamicTablesPkg: IORT set reference to Id array only if present
2021-11-10 10:55 [PATCH v3 0/8] IORT Rev E.b specification updates Sami Mujawar
` (3 preceding siblings ...)
2021-11-10 10:55 ` [PATCH v3 4/8] DynamicTablesPkg: Handle error when IdMappingToken is NULL Sami Mujawar
@ 2021-11-10 10:55 ` Sami Mujawar
2021-11-10 10:55 ` [PATCH v3 6/8] DynamicTablesPkg: IORT set reference to interrupt array " Sami Mujawar
` (3 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Sami Mujawar @ 2021-11-10 10:55 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, Alexei.Fedorov, pierre.gondois, Matteo.Carlini,
Akanksha.Jain2, Ben.Adderson, nd
The IORT table generator is setting up a reference to ID array for
nodes even when the ID Mapping count is zero. This is not an issue as an
OS would only access the ID Reference if the ID mapping count is not zero.
However, it would be good to set the reference to ID array to zero when
the ID Mapping count is zero rather than populating it with an incorrect
value.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
---
Notes:
v2:
- No code change since v1. Re-sending with v2 series. [SAMI]
v3:
- No code change since v1. Re-sending with v3 series. [SAMI]
DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c | 29 +++++++++++---------
1 file changed, 16 insertions(+), 13 deletions(-)
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
index a1714dbedd3e34e2716e828092aac169461c43c9..46ff1e6d03852daa2058b8bd13f4b18f775aba6e 100644
--- a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
@@ -1,7 +1,7 @@
/** @file
IORT Table Generator
- Copyright (c) 2017 - 2020, ARM Limited. All rights reserved.
+ Copyright (c) 2017 - 2021, Arm Limited. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent
@par Reference(s):
@@ -870,9 +870,9 @@ AddNamedComponentNodes (
NcNode->Node.NumIdMappings = NodeList->IdMappingCount;
ObjectNameLength = AsciiStrLen (NodeList->ObjectName) + 1;
- NcNode->Node.IdReference =
- (UINT32)(sizeof (EFI_ACPI_6_0_IO_REMAPPING_NAMED_COMP_NODE) +
- (ALIGN_VALUE (ObjectNameLength, 4)));
+ NcNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
+ 0 : ((UINT32)(sizeof (EFI_ACPI_6_0_IO_REMAPPING_NAMED_COMP_NODE) +
+ (ALIGN_VALUE (ObjectNameLength, 4))));
// Named Component specific data
NcNode->Flags = NodeList->Flags;
@@ -1001,7 +1001,8 @@ AddRootComplexNodes (
RcNode->Node.Revision = 1;
RcNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
RcNode->Node.NumIdMappings = NodeList->IdMappingCount;
- RcNode->Node.IdReference = sizeof (EFI_ACPI_6_0_IO_REMAPPING_RC_NODE);
+ RcNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
+ 0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_RC_NODE);
// Root Complex specific data
RcNode->CacheCoherent = NodeList->CacheCoherent;
@@ -1182,11 +1183,12 @@ AddSmmuV1V2Nodes (
SmmuNode->Node.Revision = 0;
SmmuNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
SmmuNode->Node.NumIdMappings = NodeList->IdMappingCount;
- SmmuNode->Node.IdReference = sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_NODE) +
- (NodeList->ContextInterruptCount *
- sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT)) +
- (NodeList->PmuInterruptCount *
- sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT));
+ SmmuNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
+ 0 : (sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_NODE) +
+ (NodeList->ContextInterruptCount *
+ sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT)) +
+ (NodeList->PmuInterruptCount *
+ sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT)));
// SMMU v1/v2 specific data
SmmuNode->Base = NodeList->BaseAddress;
@@ -1352,8 +1354,8 @@ AddSmmuV3Nodes (
SmmuV3Node->Node.Revision = 2;
SmmuV3Node->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
SmmuV3Node->Node.NumIdMappings = NodeList->IdMappingCount;
- SmmuV3Node->Node.IdReference =
- sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU3_NODE);
+ SmmuV3Node->Node.IdReference = (NodeList->IdMappingCount == 0) ?
+ 0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU3_NODE);
// SMMUv3 specific data
SmmuV3Node->Base = NodeList->BaseAddress;
@@ -1482,7 +1484,8 @@ AddPmcgNodes (
PmcgNode->Node.Revision = 1;
PmcgNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
PmcgNode->Node.NumIdMappings = NodeList->IdMappingCount;
- PmcgNode->Node.IdReference = sizeof (EFI_ACPI_6_0_IO_REMAPPING_PMCG_NODE);
+ PmcgNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
+ 0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_PMCG_NODE);
// PMCG specific data
PmcgNode->Base = NodeList->BaseAddress;
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 6/8] DynamicTablesPkg: IORT set reference to interrupt array if present
2021-11-10 10:55 [PATCH v3 0/8] IORT Rev E.b specification updates Sami Mujawar
` (4 preceding siblings ...)
2021-11-10 10:55 ` [PATCH v3 5/8] DynamicTablesPkg: IORT set reference to Id array only if present Sami Mujawar
@ 2021-11-10 10:55 ` Sami Mujawar
2021-11-10 10:55 ` [PATCH v3 7/8] DynamicTablesPkg: Update ArmNameSpaceObjects for IORT Rev E.b Sami Mujawar
` (2 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Sami Mujawar @ 2021-11-10 10:55 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, Alexei.Fedorov, pierre.gondois, Matteo.Carlini,
Akanksha.Jain2, Ben.Adderson, nd
The IORT generator is populating the reference field for Context and
PMU interrupts even if their count is zero.
Update the IORT generator to set the references only if the interrupt
count is not 0. Also add checks to ensure a valid reference token has
been provided.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
---
Notes:
v2:
- No code change since v1. Re-sending with v2 series. [SAMI]
v3:
- Move error handling for IdMappingToken. [PIERRE]
- Moved error handling for IdMappingToken in a separate [SAMI]
patch in v3 series.
Ref: https://edk2.groups.io/g/devel/topic/83600728#76662
DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c | 82 +++++++++++++-------
1 file changed, 55 insertions(+), 27 deletions(-)
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
index 46ff1e6d03852daa2058b8bd13f4b18f775aba6e..4c7e99f8c05fdf0a490abb9677e54862efa1ddf2 100644
--- a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
@@ -1158,6 +1158,7 @@ AddSmmuV1V2Nodes (
EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT * ContextInterruptArray;
EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT * PmuInterruptArray;
UINT64 NodeLength;
+ UINT32 Offset;
ASSERT (Iort != NULL);
@@ -1200,47 +1201,74 @@ AddSmmuV1V2Nodes (
SmmuNode->GlobalInterruptArrayRef =
OFFSET_OF (EFI_ACPI_6_0_IO_REMAPPING_SMMU_NODE, SMMU_NSgIrpt);
+ Offset = sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_NODE);
// Context Interrupt
SmmuNode->NumContextInterrupts = NodeList->ContextInterruptCount;
- SmmuNode->ContextInterruptArrayRef =
- sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_NODE);
- ContextInterruptArray =
- (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT*)((UINT8*)SmmuNode +
- sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_NODE));
+ if (NodeList->ContextInterruptCount != 0) {
+ SmmuNode->ContextInterruptArrayRef = Offset;
+ ContextInterruptArray =
+ (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT*)((UINT8*)SmmuNode + Offset);
+ Offset += (NodeList->ContextInterruptCount *
+ sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT));
+ }
// PMU Interrupt
SmmuNode->NumPmuInterrupts = NodeList->PmuInterruptCount;
- SmmuNode->PmuInterruptArrayRef = SmmuNode->ContextInterruptArrayRef +
- (NodeList->ContextInterruptCount *
- sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT));
- PmuInterruptArray =
- (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT*)((UINT8*)SmmuNode +
- SmmuNode->PmuInterruptArrayRef);
+ if (NodeList->PmuInterruptCount != 0) {
+ SmmuNode->PmuInterruptArrayRef = Offset;
+ PmuInterruptArray =
+ (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT*)((UINT8*)SmmuNode + Offset);
+ }
SmmuNode->SMMU_NSgIrpt = NodeList->SMMU_NSgIrpt;
SmmuNode->SMMU_NSgIrptFlags = NodeList->SMMU_NSgIrptFlags;
SmmuNode->SMMU_NSgCfgIrpt = NodeList->SMMU_NSgCfgIrpt;
SmmuNode->SMMU_NSgCfgIrptFlags = NodeList->SMMU_NSgCfgIrptFlags;
- // Add Context Interrupt Array
- Status = AddSmmuInterruptArray (
- CfgMgrProtocol,
- ContextInterruptArray,
- SmmuNode->NumContextInterrupts,
- NodeList->ContextInterruptToken
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((
- DEBUG_ERROR,
- "ERROR: IORT: Failed to Context Interrupt Array. Status = %r\n",
- Status
- ));
- return Status;
+ if (NodeList->ContextInterruptCount != 0) {
+ if (NodeList->ContextInterruptToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Context Interrupt token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->ContextInterruptToken,
+ Status
+ ));
+ return Status;
+ }
+
+ // Add Context Interrupt Array
+ Status = AddSmmuInterruptArray (
+ CfgMgrProtocol,
+ ContextInterruptArray,
+ SmmuNode->NumContextInterrupts,
+ NodeList->ContextInterruptToken
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to Context Interrupt Array. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
}
// Add PMU Interrupt Array
- if ((SmmuNode->NumPmuInterrupts > 0) &&
- (NodeList->PmuInterruptToken != CM_NULL_TOKEN)) {
+ if (SmmuNode->NumPmuInterrupts != 0) {
+ if (NodeList->PmuInterruptToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid PMU Interrupt token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->PmuInterruptToken,
+ Status
+ ));
+ return Status;
+ }
+
Status = AddSmmuInterruptArray (
CfgMgrProtocol,
PmuInterruptArray,
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 7/8] DynamicTablesPkg: Update ArmNameSpaceObjects for IORT Rev E.b
2021-11-10 10:55 [PATCH v3 0/8] IORT Rev E.b specification updates Sami Mujawar
` (5 preceding siblings ...)
2021-11-10 10:55 ` [PATCH v3 6/8] DynamicTablesPkg: IORT set reference to interrupt array " Sami Mujawar
@ 2021-11-10 10:55 ` Sami Mujawar
2021-11-10 10:55 ` [PATCH v3 8/8] DynamicTablesPkg: IORT generator updates for Rev E.b spec Sami Mujawar
2021-11-10 11:03 ` [edk2-devel] [PATCH v3 0/8] IORT Rev E.b specification updates Sami Mujawar
8 siblings, 0 replies; 13+ messages in thread
From: Sami Mujawar @ 2021-11-10 10:55 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, Alexei.Fedorov, pierre.gondois, Matteo.Carlini,
Akanksha.Jain2, Ben.Adderson, steven.price, Lorenzo.Pieralisi, nd
Bugzilla: 3458 - Add support IORT Rev E.b specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.b,
Feb 2021 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E and Rev E.a:
- increments the IORT table revision to 3.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
Therefore, update the Arm namespace objects to:
- add Identifier field to IORT nodes.
- introduce enums to represent RMR nodes and Memory Range
descriptors.
- add definition of node type 6 - Reserved Memory Range node.
- add definition for Memory Range Descriptors.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
---
Notes:
v2:
- No code change since v1. Re-sending with v2 series. [SAMI]
v3:
- Move Identifier field before Flags field in [PIERRE]
CM_ARM_RMR_NODE.
- Add description for CM_ARM_MEMORY_RANGE_DESCRIPTOR [PIERRE]
field.
- Updated based on review feedback. [SAMI]
Ref: https://edk2.groups.io/g/devel/topic/83600723#76659
DynamicTablesPkg/Include/ArmNameSpaceObjects.h | 60 ++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/DynamicTablesPkg/Include/ArmNameSpaceObjects.h b/DynamicTablesPkg/Include/ArmNameSpaceObjects.h
index f19c9c70666970bb70b6aa09f064bb10a9a67112..9fb08eef4aa4b4b51c5c7946a08451219e89d622 100644
--- a/DynamicTablesPkg/Include/ArmNameSpaceObjects.h
+++ b/DynamicTablesPkg/Include/ArmNameSpaceObjects.h
@@ -59,6 +59,8 @@ typedef enum ArmObjectID {
EArmObjSerialPortInfo, ///< 35 - Generic Serial Port Info
EArmObjCmn600Info, ///< 36 - CMN-600 Info
EArmObjLpiInfo, ///< 37 - Lpi Info
+ EArmObjRmr, ///< 38 - Reserved Memory Range Node
+ EArmObjMemoryRangeDescriptor, ///< 39 - Memory Range Descriptor
EArmObjMax
} EARM_OBJECT_ID;
@@ -467,6 +469,9 @@ typedef struct CmArmItsGroupNode {
UINT32 ItsIdCount;
/// Reference token for the ITS identifier array
CM_OBJECT_TOKEN ItsIdToken;
+
+ /// Unique identifier for this node.
+ UINT32 Identifier;
} CM_ARM_ITS_GROUP_NODE;
/** A structure that describes the
@@ -498,6 +503,9 @@ typedef struct CmArmNamedComponentNode {
the entry in the namespace for this object.
*/
CHAR8* ObjectName;
+
+ /// Unique identifier for this node.
+ UINT32 Identifier;
} CM_ARM_NAMED_COMPONENT_NODE;
/** A structure that describes the
@@ -526,6 +534,9 @@ typedef struct CmArmRootComplexNode {
UINT32 PciSegmentNumber;
/// Memory address size limit
UINT8 MemoryAddressSize;
+
+ /// Unique identifier for this node.
+ UINT32 Identifier;
} CM_ARM_ROOT_COMPLEX_NODE;
/** A structure that describes the
@@ -568,6 +579,9 @@ typedef struct CmArmSmmuV1SmmuV2Node {
UINT32 SMMU_NSgCfgIrpt;
/// SMMU_NSgCfgIrpt interrupt flags
UINT32 SMMU_NSgCfgIrptFlags;
+
+ /// Unique identifier for this node.
+ UINT32 Identifier;
} CM_ARM_SMMUV1_SMMUV2_NODE;
/** A structure that describes the
@@ -604,6 +618,9 @@ typedef struct CmArmSmmuV3Node {
UINT32 ProximityDomain;
/// Index into the array of ID mapping
UINT32 DeviceIdMappingIndex;
+
+ /// Unique identifier for this node.
+ UINT32 Identifier;
} CM_ARM_SMMUV3_NODE;
/** A structure that describes the
@@ -628,6 +645,9 @@ typedef struct CmArmPmcgNode {
/// Reference token for the IORT node associated with this node
CM_OBJECT_TOKEN ReferenceToken;
+
+ /// Unique identifier for this node.
+ UINT32 Identifier;
} CM_ARM_PMCG_NODE;
/** A structure that describes the
@@ -946,6 +966,46 @@ typedef struct CmArmLpiInfo {
CHAR8 StateName[16];
} CM_ARM_LPI_INFO;
+/** A structure that describes the
+ RMR node for the Platform.
+
+ ID: EArmObjRmr
+*/
+typedef struct CmArmRmrNode {
+ /// An unique token used to identify this object
+ CM_OBJECT_TOKEN Token;
+ /// Number of ID mappings
+ UINT32 IdMappingCount;
+ /// Reference token for the ID mapping array
+ CM_OBJECT_TOKEN IdMappingToken;
+
+ /// Unique identifier for this node.
+ UINT32 Identifier;
+
+ /// Reserved Memory Range flags.
+ UINT32 Flags;
+
+ /// Memory range descriptor count.
+ UINT32 MemRangeDescCount;
+ /// Reference token for the Memory Range descriptor array
+ CM_OBJECT_TOKEN MemRangeDescToken;
+} CM_ARM_RMR_NODE;
+
+/** A structure that describes the
+ Memory Range descriptor.
+
+ ID: EArmObjMemoryRangeDescriptor
+*/
+typedef struct CmArmRmrDescriptor {
+ /// Base address of Reserved Memory Range,
+ /// aligned to a page size of 64K.
+ UINT64 BaseAddress;
+
+ /// Length of the Reserved Memory range.
+ /// Must be a multiple of the page size of 64K.
+ UINT64 Length;
+} CM_ARM_MEMORY_RANGE_DESCRIPTOR;
+
#pragma pack()
#endif // ARM_NAMESPACE_OBJECTS_H_
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 8/8] DynamicTablesPkg: IORT generator updates for Rev E.b spec
2021-11-10 10:55 [PATCH v3 0/8] IORT Rev E.b specification updates Sami Mujawar
` (6 preceding siblings ...)
2021-11-10 10:55 ` [PATCH v3 7/8] DynamicTablesPkg: Update ArmNameSpaceObjects for IORT Rev E.b Sami Mujawar
@ 2021-11-10 10:55 ` Sami Mujawar
2021-11-10 11:03 ` [edk2-devel] [PATCH v3 0/8] IORT Rev E.b specification updates Sami Mujawar
8 siblings, 0 replies; 13+ messages in thread
From: Sami Mujawar @ 2021-11-10 10:55 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, Alexei.Fedorov, pierre.gondois, Matteo.Carlini,
Akanksha.Jain2, Ben.Adderson, steven.price, Lorenzo.Pieralisi, nd
Bugzilla: 3458 - Add support IORT Rev E.b specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.b,
Feb 2021 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E and Rev E.a:
- increments the IORT table revision to 3.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
Therefore, update the IORT generator to:
- increment IORT table revision count to 3.
- populate Identifier filed if revision is greater than 2.
- add support to populate Reserved Memory Range nodes and
the Memory range descriptors.
- add validation to check that the Identifier field is
unique.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
---
Notes:
v2:
- The macro EFI_ACPI_IO_REMAPPING_TABLE_REVISION was set to [SAMI]
Rev 0 as setting to Rev 3 will break existing platforms.
Therefore, set the max supported IORT generator revision
to 3.
v3:
- Move error handling for IdMappingToken. [PIERRE]
- Moved error handling for IdMappingToken in a separate [SAMI]
patch in v3 series.
Ref: https://edk2.groups.io/g/devel/topic/83600726#76661
DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c | 586 ++++++++++++++++++--
DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.h | 5 +-
2 files changed, 559 insertions(+), 32 deletions(-)
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
index 4c7e99f8c05fdf0a490abb9677e54862efa1ddf2..9b687f0165e6136f2f24749d27dee27edaff1b31 100644
--- a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
@@ -5,8 +5,8 @@
SPDX-License-Identifier: BSD-2-Clause-Patent
@par Reference(s):
- - IO Remapping Table, Platform Design Document,
- Document number: ARM DEN 0049D, Issue D, March 2018
+ - IO Remapping Table, Platform Design Document, Revision E.b, Feb 2021
+ (https://developer.arm.com/documentation/den0049/)
**/
@@ -37,9 +37,11 @@ Requirements:
- EArmObjSmmuV1SmmuV2
- EArmObjSmmuV3
- EArmObjPmcg
+ - EArmObjRmr
- EArmObjGicItsIdentifierArray
- EArmObjIdMappingArray
- - EArmObjGicItsIdentifierArray
+ - EArmObjSmmuInterruptArray
+ - EArmObjMemoryRangeDescriptor
*/
/** This macro expands to a function that retrieves the ITS
@@ -96,6 +98,24 @@ GET_OBJECT_LIST (
CM_ARM_PMCG_NODE
);
+/** This macro expands to a function that retrieves the
+ RMR node information from the Configuration Manager.
+*/
+GET_OBJECT_LIST (
+ EObjNameSpaceArm,
+ EArmObjRmr,
+ CM_ARM_RMR_NODE
+ );
+
+/** This macro expands to a function that retrieves the
+ Memory Range Descriptor Array information from the Configuration Manager.
+*/
+GET_OBJECT_LIST (
+ EObjNameSpaceArm,
+ EArmObjMemoryRangeDescriptor,
+ CM_ARM_MEMORY_RANGE_DESCRIPTOR
+ );
+
/** This macro expands to a function that retrieves the
ITS Identifier Array information from the Configuration Manager.
*/
@@ -177,13 +197,16 @@ GetSizeofItsGroupNodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));
Size += GetItsGroupNodeSize (NodeList);
@@ -250,13 +273,16 @@ GetSizeofNamedComponentNodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));
Size += GetNamedComponentNodeSize (NodeList);
@@ -322,13 +348,16 @@ GetSizeofRootComplexNodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));
Size += GetRootComplexNodeSize (NodeList);
@@ -400,13 +429,16 @@ GetSizeofSmmuV1V2Nodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));
Size += GetSmmuV1V2NodeSize (NodeList);
@@ -471,13 +503,16 @@ GetSizeofSmmuV3Nodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));
Size += GetSmmuV3NodeSize (NodeList);
@@ -542,13 +577,16 @@ GetSizeofPmcgNodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));
Size += GetPmcgNodeSize (NodeList);
@@ -558,6 +596,83 @@ GetSizeofPmcgNodes (
return Size;
}
+/** Returns the size of the RMR node.
+
+ @param [in] Node Pointer to RMR node.
+
+ @retval Size of the RMR node.
+**/
+STATIC
+UINT32
+GetRmrNodeSize (
+ IN CONST CM_ARM_RMR_NODE * Node
+ )
+{
+ ASSERT (Node != NULL);
+
+ /* Size of RMR node +
+ Size of ID mapping array +
+ Size of Memory Range Descriptor array
+ */
+ return (UINT32)(sizeof (EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE) +
+ (Node->IdMappingCount *
+ sizeof (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE)) +
+ (Node->MemRangeDescCount *
+ sizeof (EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC)));
+}
+
+/** Returns the total size required for the RMR nodes and
+ updates the Node Indexer.
+
+ This function calculates the size required for the node group
+ and also populates the Node Indexer array with offsets for the
+ individual nodes.
+
+ @param [in] NodeStartOffset Offset from the start of the
+ IORT where this node group starts.
+ @param [in] NodeList Pointer to RMR node list.
+ @param [in] NodeCount Count of the RMR nodes.
+ @param [in, out] NodeIndexer Pointer to the next Node Indexer.
+
+ @retval Total size of the RMR nodes.
+**/
+STATIC
+UINT64
+GetSizeofRmrNodes (
+ IN CONST UINT32 NodeStartOffset,
+ IN CONST CM_ARM_RMR_NODE * NodeList,
+ IN UINT32 NodeCount,
+ IN OUT IORT_NODE_INDEXER ** CONST NodeIndexer
+ )
+{
+ UINT64 Size;
+
+ ASSERT (NodeList != NULL);
+
+ Size = 0;
+ while (NodeCount-- != 0) {
+ (*NodeIndexer)->Token = NodeList->Token;
+ (*NodeIndexer)->Object = (VOID*)NodeList;
+ (*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
+ DEBUG ((
+ DEBUG_INFO,
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
+ *NodeIndexer,
+ (*NodeIndexer)->Token,
+ (*NodeIndexer)->Object,
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
+ ));
+
+ Size += GetRmrNodeSize (NodeList);
+ (*NodeIndexer)++;
+ NodeList++;
+ }
+ return Size;
+}
+
/** Returns the offset of the Node referenced by the Token.
@param [in] NodeIndexer Pointer to node indexer array.
@@ -707,6 +822,7 @@ AddIdMappingArray (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the ITS Group
Nodes.
@@ -723,6 +839,7 @@ EFI_STATUS
AddItsGroupNodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_ITS_GROUP_NODE * NodeList,
@@ -759,11 +876,17 @@ AddItsGroupNodes (
// Populate the node header
ItsGroupNode->Node.Type = EFI_ACPI_IORT_TYPE_ITS_GROUP;
ItsGroupNode->Node.Length = (UINT16)NodeLength;
- ItsGroupNode->Node.Revision = 0;
- ItsGroupNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
ItsGroupNode->Node.NumIdMappings = 0;
ItsGroupNode->Node.IdReference = 0;
+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ ItsGroupNode->Node.Revision = 0;
+ ItsGroupNode->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ ItsGroupNode->Node.Revision = 1;
+ ItsGroupNode->Node.Identifier = NodeList->Identifier;
+ }
+
// IORT specific data
ItsGroupNode->NumItsIdentifiers = NodeList->ItsIdCount;
ItsIds = (UINT32*)((UINT8*)ItsGroupNode +
@@ -814,6 +937,7 @@ AddItsGroupNodes (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the Named
Component Nodes.
@@ -830,6 +954,7 @@ EFI_STATUS
AddNamedComponentNodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_NAMED_COMPONENT_NODE * NodeList,
@@ -865,10 +990,16 @@ AddNamedComponentNodes (
// Populate the node header
NcNode->Node.Type = EFI_ACPI_IORT_TYPE_NAMED_COMP;
NcNode->Node.Length = (UINT16)NodeLength;
- NcNode->Node.Revision = 2;
- NcNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
NcNode->Node.NumIdMappings = NodeList->IdMappingCount;
+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ NcNode->Node.Revision = 2;
+ NcNode->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ NcNode->Node.Revision = 4;
+ NcNode->Node.Identifier = NodeList->Identifier;
+ }
+
ObjectNameLength = AsciiStrLen (NodeList->ObjectName) + 1;
NcNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
0 : ((UINT32)(sizeof (EFI_ACPI_6_0_IO_REMAPPING_NAMED_COMP_NODE) +
@@ -949,6 +1080,7 @@ AddNamedComponentNodes (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the Root Complex
Nodes.
@@ -965,6 +1097,7 @@ EFI_STATUS
AddRootComplexNodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_ROOT_COMPLEX_NODE * NodeList,
@@ -998,12 +1131,18 @@ AddRootComplexNodes (
// Populate the node header
RcNode->Node.Type = EFI_ACPI_IORT_TYPE_ROOT_COMPLEX;
RcNode->Node.Length = (UINT16)NodeLength;
- RcNode->Node.Revision = 1;
- RcNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
RcNode->Node.NumIdMappings = NodeList->IdMappingCount;
RcNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_RC_NODE);
+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ RcNode->Node.Revision = 1;
+ RcNode->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ RcNode->Node.Revision = 3;
+ RcNode->Node.Identifier = NodeList->Identifier;
+ }
+
// Root Complex specific data
RcNode->CacheCoherent = NodeList->CacheCoherent;
RcNode->AllocationHints = NodeList->AllocationHints;
@@ -1129,6 +1268,7 @@ AddSmmuInterruptArray (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the SMMU v1/v2
Nodes.
@@ -1145,6 +1285,7 @@ EFI_STATUS
AddSmmuV1V2Nodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_SMMUV1_SMMUV2_NODE * NodeList,
@@ -1181,8 +1322,6 @@ AddSmmuV1V2Nodes (
// Populate the node header
SmmuNode->Node.Type = EFI_ACPI_IORT_TYPE_SMMUv1v2;
SmmuNode->Node.Length = (UINT16)NodeLength;
- SmmuNode->Node.Revision = 0;
- SmmuNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
SmmuNode->Node.NumIdMappings = NodeList->IdMappingCount;
SmmuNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
0 : (sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_NODE) +
@@ -1191,6 +1330,14 @@ AddSmmuV1V2Nodes (
(NodeList->PmuInterruptCount *
sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT)));
+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ SmmuNode->Node.Revision = 1;
+ SmmuNode->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ SmmuNode->Node.Revision = 3;
+ SmmuNode->Node.Identifier = NodeList->Identifier;
+ }
+
// SMMU v1/v2 specific data
SmmuNode->Base = NodeList->BaseAddress;
SmmuNode->Span = NodeList->Span;
@@ -1333,6 +1480,7 @@ AddSmmuV1V2Nodes (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the SMMUv3 Nodes.
@param [in] NodeList Pointer to an array of SMMUv3 Node Objects.
@@ -1347,6 +1495,7 @@ EFI_STATUS
AddSmmuV3Nodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_SMMUV3_NODE * NodeList,
@@ -1379,12 +1528,18 @@ AddSmmuV3Nodes (
// Populate the node header
SmmuV3Node->Node.Type = EFI_ACPI_IORT_TYPE_SMMUv3;
SmmuV3Node->Node.Length = (UINT16)NodeLength;
- SmmuV3Node->Node.Revision = 2;
- SmmuV3Node->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
SmmuV3Node->Node.NumIdMappings = NodeList->IdMappingCount;
SmmuV3Node->Node.IdReference = (NodeList->IdMappingCount == 0) ?
0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU3_NODE);
+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ SmmuV3Node->Node.Revision = 2;
+ SmmuV3Node->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ SmmuV3Node->Node.Revision = 4;
+ SmmuV3Node->Node.Identifier = NodeList->Identifier;
+ }
+
// SMMUv3 specific data
SmmuV3Node->Base = NodeList->BaseAddress;
SmmuV3Node->Flags = NodeList->Flags;
@@ -1461,6 +1616,7 @@ AddSmmuV3Nodes (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the PMCG Nodes.
@param [in] NodeList Pointer to an array of PMCG Node Objects.
@@ -1475,6 +1631,7 @@ EFI_STATUS
AddPmcgNodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_PMCG_NODE * NodeList,
@@ -1509,12 +1666,18 @@ AddPmcgNodes (
// Populate the node header
PmcgNode->Node.Type = EFI_ACPI_IORT_TYPE_PMCG;
PmcgNode->Node.Length = (UINT16)NodeLength;
- PmcgNode->Node.Revision = 1;
- PmcgNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
PmcgNode->Node.NumIdMappings = NodeList->IdMappingCount;
PmcgNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_PMCG_NODE);
+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ PmcgNode->Node.Revision = 1;
+ PmcgNode->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ PmcgNode->Node.Revision = 2;
+ PmcgNode->Node.Identifier = NodeList->Identifier;
+ }
+
// PMCG specific data
PmcgNode->Base = NodeList->BaseAddress;
PmcgNode->OverflowInterruptGsiv = NodeList->OverflowInterrupt;
@@ -1581,6 +1744,273 @@ AddPmcgNodes (
return EFI_SUCCESS;
}
+/** Update the Memory Range Descriptor Array.
+
+ This function retrieves the Memory Range Descriptor objects referenced by
+ MemRangeDescToken and updates the Memory Range Descriptor array.
+
+ @param [in] This Pointer to the table Generator.
+ @param [in] CfgMgrProtocol Pointer to the Configuration Manager
+ Protocol Interface.
+ @param [in] DescArray Pointer to an array of Memory Range
+ Descriptors.
+ @param [in] DescCount Number of Id Descriptors.
+ @param [in] DescToken Reference Token for retrieving the
+ Memory Range Descriptor Array.
+
+ @retval EFI_SUCCESS Table generated successfully.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND The required object was not found.
+**/
+STATIC
+EFI_STATUS
+AddMemRangeDescArray (
+ IN CONST ACPI_TABLE_GENERATOR * CONST This,
+ IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC * DescArray,
+ IN UINT32 DescCount,
+ IN CONST CM_OBJECT_TOKEN DescToken
+ )
+{
+ EFI_STATUS Status;
+ CM_ARM_MEMORY_RANGE_DESCRIPTOR * MemRangeDesc;
+ UINT32 MemRangeDescCount;
+
+ ASSERT (DescArray != NULL);
+
+ // Get the Id Mapping Array
+ Status = GetEArmObjMemoryRangeDescriptor (
+ CfgMgrProtocol,
+ DescToken,
+ &MemRangeDesc,
+ &MemRangeDescCount
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to get Memory Range Descriptor array. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ if (MemRangeDescCount < DescCount) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to get the required number of Memory"
+ " Range Descriptors.\n"
+ ));
+ return EFI_NOT_FOUND;
+ }
+
+ // Populate the Memory Range Descriptor array
+ while (DescCount-- != 0) {
+
+ DescArray->Base = MemRangeDesc->BaseAddress;
+ DescArray->Length = MemRangeDesc->Length;
+ DescArray->Reserved = EFI_ACPI_RESERVED_DWORD;
+
+ DescArray++;
+ MemRangeDesc++;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/** Update the RMR Node Information.
+
+ This function updates the RMR node information in the IORT table.
+
+ @param [in] This Pointer to the table Generator.
+ @param [in] CfgMgrProtocol Pointer to the Configuration Manager
+ Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
+ @param [in] Iort Pointer to IORT table structure.
+ @param [in] NodesStartOffset Offset for the start of the PMCG Nodes.
+ @param [in] NodeList Pointer to an array of PMCG Node Objects.
+ @param [in] NodeCount Number of PMCG Node Objects.
+
+ @retval EFI_SUCCESS Table generated successfully.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND The required object was not found.
+**/
+STATIC
+EFI_STATUS
+AddRmrNodes (
+ IN CONST ACPI_TABLE_GENERATOR * CONST This,
+ IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
+ IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
+ IN CONST UINT32 NodesStartOffset,
+ IN CONST CM_ARM_RMR_NODE * NodeList,
+ IN UINT32 NodeCount
+ )
+{
+ EFI_STATUS Status;
+ EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE * RmrNode;
+ EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE * IdMapArray;
+ EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC * MemRangeDescArray;
+ UINT64 NodeLength;
+
+ ASSERT (Iort != NULL);
+
+ RmrNode = (EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE*)((UINT8*)Iort +
+ NodesStartOffset);
+
+ while (NodeCount-- != 0) {
+ NodeLength = GetRmrNodeSize (NodeList);
+ if (NodeLength > MAX_UINT16) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: RMR Node length 0x%lx > MAX_UINT16. Status = %r\n",
+ NodeLength,
+ Status
+ ));
+ return Status;
+ }
+
+ if (NodeList->MemRangeDescCount == 0) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Memory Range Desc count = %d. Status = %r\n",
+ NodeList->MemRangeDescCount,
+ Status
+ ));
+ return Status;
+ }
+
+ if (NodeList->MemRangeDescToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Memory Range Descriptor token,"
+ " Token = 0x%x. Status = %r\n",
+ NodeList->MemRangeDescToken,
+ Status
+ ));
+ return Status;
+ }
+
+ // Populate the node header
+ RmrNode->Node.Type = EFI_ACPI_IORT_TYPE_RMR;
+ RmrNode->Node.Length = (UINT16)NodeLength;
+ RmrNode->Node.Revision = 1;
+ RmrNode->Node.Identifier = NodeList->Identifier;
+ RmrNode->Node.NumIdMappings = NodeList->IdMappingCount;
+ RmrNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
+ 0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE);
+
+ // RMR specific data
+ RmrNode->Flags = NodeList->Flags;
+ RmrNode->NumMemRangeDesc = NodeList->MemRangeDescCount;
+ RmrNode->MemRangeDescRef = (NodeList->MemRangeDescCount == 0) ?
+ 0 : (sizeof (EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE) +
+ (NodeList->IdMappingCount *
+ sizeof (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE)));
+
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
+ // Ids for RMR node
+ IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)RmrNode +
+ RmrNode->Node.IdReference);
+
+ Status = AddIdMappingArray (
+ This,
+ CfgMgrProtocol,
+ IdMapArray,
+ NodeList->IdMappingCount,
+ NodeList->IdMappingToken
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to add Id Mapping Array. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+ }
+
+ // Memory Range Descriptors for RMR node
+ MemRangeDescArray = (EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC*)(
+ (UINT8*)RmrNode +
+ RmrNode->MemRangeDescRef
+ );
+
+ Status = AddMemRangeDescArray (
+ This,
+ CfgMgrProtocol,
+ MemRangeDescArray,
+ NodeList->MemRangeDescCount,
+ NodeList->MemRangeDescToken
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to Memory Range Descriptor Array. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ // Next RMR Node
+ RmrNode = (EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE*)((UINT8*)RmrNode +
+ RmrNode->Node.Length);
+ NodeList++;
+ } // RMR Node
+
+ return EFI_SUCCESS;
+}
+
+/** Validates that the IORT nodes Identifier are unique.
+
+ @param [in] NodeIndexer Pointer to the Node Indexer.
+ @param [in] NodeCount Number of IORT Nodes.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER Identifier field not unique.
+**/
+STATIC
+EFI_STATUS
+ValidateNodeIdentifiers (
+ IN CONST IORT_NODE_INDEXER * CONST NodeIndexer,
+ IN UINT32 NodeCount
+ )
+{
+ UINT32 IndexI;
+ UINT32 IndexJ;
+
+ for (IndexI = 0; IndexI < NodeCount; IndexI++) {
+ for (IndexJ = 0; IndexJ < NodeCount; IndexJ++) {
+ if ((IndexI != IndexJ) &&
+ (NodeIndexer[IndexI].Identifier == NodeIndexer[IndexJ].Identifier)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: UID %d of Token %p matches with that of Token %p.\n",
+ NodeIndexer[IndexI].Identifier,
+ NodeIndexer[IndexI].Token,
+ NodeIndexer[IndexJ].Token
+ ));
+ return EFI_INVALID_PARAMETER;
+ }
+ }// IndexJ
+ } // IndexI
+ return EFI_SUCCESS;
+}
+
/** Construct the IORT ACPI table.
This function invokes the Configuration Manager protocol interface
@@ -1625,6 +2055,7 @@ BuildIortTable (
UINT32 SmmuV1V2NodeCount;
UINT32 SmmuV3NodeCount;
UINT32 PmcgNodeCount;
+ UINT32 RmrNodeCount;
UINT32 ItsGroupOffset;
UINT32 NamedComponentOffset;
@@ -1632,6 +2063,7 @@ BuildIortTable (
UINT32 SmmuV1V2Offset;
UINT32 SmmuV3Offset;
UINT32 PmcgOffset;
+ UINT32 RmrOffset;
CM_ARM_ITS_GROUP_NODE * ItsGroupNodeList;
CM_ARM_NAMED_COMPONENT_NODE * NamedComponentNodeList;
@@ -1639,6 +2071,7 @@ BuildIortTable (
CM_ARM_SMMUV1_SMMUV2_NODE * SmmuV1V2NodeList;
CM_ARM_SMMUV3_NODE * SmmuV3NodeList;
CM_ARM_PMCG_NODE * PmcgNodeList;
+ CM_ARM_RMR_NODE * RmrNodeList;
EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort;
IORT_NODE_INDEXER * NodeIndexer;
@@ -1781,6 +2214,27 @@ BuildIortTable (
// Add the PMCG node count
IortNodeCount += PmcgNodeCount;
+ if (AcpiTableInfo->AcpiTableRevision >= EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ // Get the RMR node info
+ Status = GetEArmObjRmr (
+ CfgMgrProtocol,
+ CM_NULL_TOKEN,
+ &RmrNodeList,
+ &RmrNodeCount
+ );
+ if (EFI_ERROR (Status) && (Status != EFI_NOT_FOUND)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to get RMR Node Info. Status = %r\n",
+ Status
+ ));
+ goto error_handler;
+ }
+
+ // Add the RMR node count
+ IortNodeCount += RmrNodeCount;
+ }
+
// Allocate Node Indexer array
NodeIndexer = (IORT_NODE_INDEXER*)AllocateZeroPool (
(sizeof (IORT_NODE_INDEXER) *
@@ -1984,6 +2438,37 @@ BuildIortTable (
));
}
+ // RMR Nodes
+ if ((AcpiTableInfo->AcpiTableRevision >= EFI_ACPI_IO_REMAPPING_TABLE_REV3) &&
+ (RmrNodeCount > 0)) {
+ RmrOffset = (UINT32)TableSize;
+ // Size of RMR node list.
+ NodeSize = GetSizeofRmrNodes (
+ RmrOffset,
+ RmrNodeList,
+ RmrNodeCount,
+ &NodeIndexer
+ );
+ if (NodeSize > MAX_UINT32) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Size of RMR Nodes. Status = %r\n",
+ Status
+ ));
+ goto error_handler;
+ }
+ TableSize += NodeSize;
+
+ DEBUG ((
+ DEBUG_INFO,
+ " RmrNodeCount = %d\n" \
+ " RmrOffset = %d\n",
+ RmrNodeCount,
+ RmrOffset
+ ));
+ }
+
DEBUG ((
DEBUG_INFO,
"INFO: IORT:\n" \
@@ -2005,6 +2490,19 @@ BuildIortTable (
goto error_handler;
}
+ // Validate that the identifiers for the nodes are unique
+ if (AcpiTableInfo->AcpiTableRevision >= EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ Status = ValidateNodeIdentifiers (Generator->NodeIndexer, IortNodeCount);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Node Identifier not unique. Status = %r\n",
+ Status
+ ));
+ goto error_handler;
+ }
+ }
+
// Allocate the Buffer for IORT table
*Table = (EFI_ACPI_DESCRIPTION_HEADER*)AllocateZeroPool (TableSize);
if (*Table == NULL) {
@@ -2053,6 +2551,7 @@ BuildIortTable (
Status = AddItsGroupNodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
ItsGroupOffset,
ItsGroupNodeList,
@@ -2072,6 +2571,7 @@ BuildIortTable (
Status = AddNamedComponentNodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
NamedComponentOffset,
NamedComponentNodeList,
@@ -2091,6 +2591,7 @@ BuildIortTable (
Status = AddRootComplexNodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
RootComplexOffset,
RootComplexNodeList,
@@ -2110,6 +2611,7 @@ BuildIortTable (
Status = AddSmmuV1V2Nodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
SmmuV1V2Offset,
SmmuV1V2NodeList,
@@ -2129,6 +2631,7 @@ BuildIortTable (
Status = AddSmmuV3Nodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
SmmuV3Offset,
SmmuV3NodeList,
@@ -2148,6 +2651,7 @@ BuildIortTable (
Status = AddPmcgNodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
PmcgOffset,
PmcgNodeList,
@@ -2156,7 +2660,27 @@ BuildIortTable (
if (EFI_ERROR (Status)) {
DEBUG ((
DEBUG_ERROR,
- "ERROR: IORT: Failed to add SMMUv3 Node. Status = %r\n",
+ "ERROR: IORT: Failed to add PMCG Node. Status = %r\n",
+ Status
+ ));
+ goto error_handler;
+ }
+ }
+
+ if (RmrNodeCount > 0) {
+ Status = AddRmrNodes (
+ This,
+ CfgMgrProtocol,
+ AcpiTableInfo,
+ Iort,
+ RmrOffset,
+ RmrNodeList,
+ RmrNodeCount
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to add RMR Node. Status = %r\n",
Status
));
goto error_handler;
@@ -2239,11 +2763,11 @@ ACPI_IORT_GENERATOR IortGenerator = {
// Generator Description
L"ACPI.STD.IORT.GENERATOR",
// ACPI Table Signature
- EFI_ACPI_6_2_IO_REMAPPING_TABLE_SIGNATURE,
+ EFI_ACPI_6_3_IO_REMAPPING_TABLE_SIGNATURE,
// ACPI Table Revision supported by this Generator
- EFI_ACPI_IO_REMAPPING_TABLE_REVISION,
+ EFI_ACPI_IO_REMAPPING_TABLE_REV3,
// Minimum supported ACPI Table Revision
- EFI_ACPI_IO_REMAPPING_TABLE_REVISION,
+ EFI_ACPI_IO_REMAPPING_TABLE_REV0,
// Creator ID
TABLE_GENERATOR_CREATOR_ID_ARM,
// Creator Revision
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.h b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.h
index bbf8aaf9efa38a75626a49af6f380b1c8c1a0629..afe2089b1dc20ed671583e2a309cc1a46c3404c6 100644
--- a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.h
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.h
@@ -1,6 +1,6 @@
/** @file
- Copyright (c) 2018, ARM Limited. All rights reserved.
+ Copyright (c) 2018 - 2021, ARM Limited. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -25,6 +25,9 @@ typedef struct IortNodeIndexer {
VOID * Object;
/// Node offset from the start of the IORT table
UINT32 Offset;
+
+ /// Unique identifier for the Node
+ UINT32 Identifier;
} IORT_NODE_INDEXER;
typedef struct AcpiIortGenerator {
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [edk2-devel] [PATCH v3 0/8] IORT Rev E.b specification updates
2021-11-10 10:55 [PATCH v3 0/8] IORT Rev E.b specification updates Sami Mujawar
` (7 preceding siblings ...)
2021-11-10 10:55 ` [PATCH v3 8/8] DynamicTablesPkg: IORT generator updates for Rev E.b spec Sami Mujawar
@ 2021-11-10 11:03 ` Sami Mujawar
2022-02-03 16:08 ` Sami Mujawar
8 siblings, 1 reply; 13+ messages in thread
From: Sami Mujawar @ 2021-11-10 11:03 UTC (permalink / raw)
To: Sami Mujawar, devel
[-- Attachment #1: Type: text/plain, Size: 135 bytes --]
The corresponding patch series to update the platforms in edk2-platforms is submitted at https://edk2.groups.io/g/devel/message/83555
[-- Attachment #2: Type: text/html, Size: 135 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread