From: "Brijesh Singh" <brijesh.singh@amd.com>
To: <devel@edk2.groups.io>
Cc: James Bottomley <jejb@linux.ibm.com>, Min Xu <min.m.xu@intel.com>,
"Jiewen Yao" <jiewen.yao@intel.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
"Jordan Justen" <jordan.l.justen@intel.com>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Erdem Aktas <erdemaktas@google.com>,
"Michael Roth" <Michael.Roth@amd.com>,
Gerd Hoffmann <kraxel@redhat.com>,
"Michael D Kinney" <michael.d.kinney@intel.com>,
Liming Gao <gaoliming@byosoft.com.cn>,
Zhiguang Liu <zhiguang.liu@intel.com>, Ray Ni <ray.ni@intel.com>,
Rahul Kumar <rahul1.kumar@intel.com>,
Eric Dong <eric.dong@intel.com>,
Michael Roth <michael.roth@amd.com>,
Brijesh Singh <brijesh.singh@amd.com>
Subject: [PATCH v12 27/32] UefiCpuPkg/MpInitLib: use BSP to do extended topology check
Date: Wed, 10 Nov 2021 16:14:52 -0600 [thread overview]
Message-ID: <20211110221457.2397234-28-brijesh.singh@amd.com> (raw)
In-Reply-To: <20211110221457.2397234-1-brijesh.singh@amd.com>
From: Michael Roth <michael.roth@amd.com>
During AP bringup, just after switching to long mode, APs will do some
cpuid calls to verify that the extended topology leaf (0xB) is available
so they can fetch their x2 APIC IDs from it. In the case of SEV-ES,
these cpuid instructions must be handled by direct use of the GHCB MSR
protocol to fetch the values from the hypervisor, since a #VC handler
is not yet available due to the AP's stack not being set up yet.
For SEV-SNP, rather than relying on the GHCB MSR protocol, it is
expected that these values would be obtained from the SEV-SNP CPUID
table instead. The actual x2 APIC ID (and 8-bit APIC IDs) would still
be fetched from hypervisor using the GHCB MSR protocol however, so
introducing support for the SEV-SNP CPUID table in that part of the AP
bring-up code would only be to handle the checks/validation of the
extended topology leaf.
Rather than introducing all the added complexity needed to handle these
checks via the CPUID table, instead let the BSP do the check in advance,
since it can make use of the #VC handler to avoid the need to scan the
SNP CPUID table directly, and add a flag in ExchangeInfo to communicate
the result of this check to APs.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Suggested-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
---
UefiCpuPkg/Library/MpInitLib/MpLib.h | 1 +
UefiCpuPkg/Library/MpInitLib/MpLib.c | 11 ++++++++
UefiCpuPkg/Library/MpInitLib/MpEqu.inc | 1 +
UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm | 27 ++++++++++++++++++++
4 files changed, 40 insertions(+)
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index 45bc1de23e3c..c52b6157429b 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -224,6 +224,7 @@ typedef struct {
BOOLEAN SevEsIsEnabled;
BOOLEAN SevSnpIsEnabled;
UINTN GhcbBase;
+ BOOLEAN ExtTopoAvail;
} MP_CPU_EXCHANGE_INFO;
#pragma pack()
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index ab838cbc0ff6..d8372ffa9d5a 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -853,6 +853,7 @@ FillExchangeInfoData (
UINTN Size;
IA32_SEGMENT_DESCRIPTOR *Selector;
IA32_CR4 Cr4;
+ UINT32 StdRangeMax;
ExchangeInfo = CpuMpData->MpCpuExchangeInfo;
ExchangeInfo->StackStart = CpuMpData->Buffer;
@@ -892,6 +893,16 @@ FillExchangeInfoData (
ExchangeInfo->SevSnpIsEnabled = CpuMpData->SevSnpIsEnabled;
ExchangeInfo->GhcbBase = (UINTN) CpuMpData->GhcbBase;
+ if (ExchangeInfo->SevSnpIsEnabled) {
+ AsmCpuid (CPUID_SIGNATURE, &StdRangeMax, NULL, NULL, NULL);
+ if (StdRangeMax >= CPUID_EXTENDED_TOPOLOGY) {
+ CPUID_EXTENDED_TOPOLOGY_EBX ExtTopoEbx;
+
+ AsmCpuid (CPUID_EXTENDED_TOPOLOGY, NULL, &ExtTopoEbx.Uint32, NULL, NULL);
+ ExchangeInfo->ExtTopoAvail = !!ExtTopoEbx.Bits.LogicalProcessors;
+ }
+ }
+
//
// Get the BSP's data of GDT and IDT
//
diff --git a/UefiCpuPkg/Library/MpInitLib/MpEqu.inc b/UefiCpuPkg/Library/MpInitLib/MpEqu.inc
index 01668638f245..aba53f57201c 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpEqu.inc
+++ b/UefiCpuPkg/Library/MpInitLib/MpEqu.inc
@@ -94,6 +94,7 @@ struc MP_CPU_EXCHANGE_INFO
.SevEsIsEnabled: CTYPE_BOOLEAN 1
.SevSnpIsEnabled CTYPE_BOOLEAN 1
.GhcbBase: CTYPE_UINTN 1
+ .ExtTopoAvail: CTYPE_BOOLEAN 1
endstruc
MP_CPU_EXCHANGE_INFO_OFFSET equ (SwitchToRealProcEnd - RendezvousFunnelProcStart)
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm b/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
index 0034920b2f6b..8bb1161fa0f7 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
@@ -118,6 +118,32 @@ SevEsGetApicId:
or rax, rdx
mov rdi, rax ; RDI now holds the original GHCB GPA
+ ;
+ ; For SEV-SNP, the recommended handling for getting the x2APIC ID
+ ; would be to use the SNP CPUID table to fetch CPUID.00H:EAX and
+ ; CPUID:0BH:EBX[15:0] instead of the GHCB MSR protocol vmgexits
+ ; below.
+ ;
+ ; To avoid the unecessary ugliness to accomplish that here, the BSP
+ ; has performed these checks in advance (where #VC handler handles
+ ; the CPUID table lookups automatically) and cached them in a flag
+ ; so those checks can be skipped here.
+ ;
+ mov eax, [esi + MP_CPU_EXCHANGE_INFO_FIELD (SevSnpIsEnabled)]
+ cmp al, 1
+ jne CheckExtTopoAvail
+
+ ;
+ ; Even with SEV-SNP, the actual x2APIC ID in CPUID.0BH:EDX
+ ; fetched from the hypervisor the same way SEV-ES does it.
+ ;
+ mov eax, [esi + MP_CPU_EXCHANGE_INFO_FIELD (ExtTopoAvail)]
+ cmp al, 1
+ je GetApicIdSevEs
+ ; The 8-bit APIC ID fallback is also the same as with SEV-ES
+ jmp NoX2ApicSevEs
+
+CheckExtTopoAvail:
mov rdx, 0 ; CPUID function 0
mov rax, 0 ; RAX register requested
or rax, 4
@@ -136,6 +162,7 @@ SevEsGetApicId:
test edx, 0ffffh
jz NoX2ApicSevEs ; CPUID.0BH:EBX[15:0] is zero
+GetApicIdSevEs:
mov rdx, 0bh ; CPUID function 0x0b
mov rax, 0c0000000h ; RDX register requested
or rax, 4
--
2.25.1
next prev parent reply other threads:[~2021-11-10 22:15 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-10 22:14 [PATCH v12 00/32] Add AMD Secure Nested Paging (SEV-SNP) support Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 01/32] OvmfPkg/SecMain: move SEV specific routines in AmdSev.c Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 02/32] UefiCpuPkg/MpInitLib: " Brijesh Singh
2021-11-12 1:40 ` [edk2-devel] " Ni, Ray
2021-11-10 22:14 ` [PATCH v12 03/32] OvmfPkg/ResetVector: move clearing GHCB in SecMain Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 04/32] OvmfPkg/ResetVector: introduce SEV metadata descriptor for VMM use Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 05/32] OvmfPkg: reserve SNP secrets page Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 06/32] OvmfPkg: reserve CPUID page Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 07/32] OvmfPkg/ResetVector: pre-validate the data pages used in SEC phase Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 08/32] OvmfPkg/ResetVector: use SEV-SNP-validated CPUID values Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 09/32] OvmfPkg/MemEncryptSevLib: add MemEncryptSevSnpEnabled() Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 10/32] OvmfPkg/SecMain: register GHCB gpa for the SEV-SNP guest Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 11/32] OvmfPkg/VmgExitLib: use SEV-SNP-validated CPUID values Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 12/32] OvmfPkg/PlatformPei: register GHCB gpa for the SEV-SNP guest Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 13/32] OvmfPkg/AmdSevDxe: do not use extended PCI config space Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 14/32] OvmfPkg/MemEncryptSevLib: add support to validate system RAM Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 15/32] OvmfPkg/MemEncryptSevLib: add function to check the VMPL0 Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 16/32] OvmfPkg/BaseMemEncryptSevLib: skip the pre-validated system RAM Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 17/32] OvmfPkg/MemEncryptSevLib: add support to validate > 4GB memory in PEI phase Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 18/32] OvmfPkg/SecMain: validate the memory used for decompressing Fv Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 19/32] OvmfPkg/PlatformPei: validate the system RAM when SNP is active Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 20/32] MdePkg: Define ConfidentialComputingGuestAttr Brijesh Singh
2021-11-11 14:00 ` Ni, Ray
2021-11-11 17:07 ` Brijesh Singh
2021-11-12 2:28 ` Yao, Jiewen
2021-11-12 3:19 ` Ni, Ray
2021-11-12 3:57 ` Yao, Jiewen
2021-11-10 22:14 ` [PATCH v12 21/32] OvmfPkg/PlatformPei: set PcdConfidentialComputingAttr when SEV is active Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 22/32] UefiCpuPkg/MpInitLib: use PcdConfidentialComputingAttr to check SEV status Brijesh Singh
2021-11-12 1:27 ` Ni, Ray
2021-11-12 12:33 ` Brijesh Singh
2021-11-12 12:59 ` James Bottomley
2021-11-10 22:14 ` [PATCH v12 23/32] UefiCpuPkg: add PcdGhcbHypervisorFeatures Brijesh Singh
2021-11-12 1:28 ` Ni, Ray
2021-11-10 22:14 ` [PATCH v12 24/32] OvmfPkg/PlatformPei: set the Hypervisor Features PCD Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 25/32] MdePkg/GHCB: increase the GHCB protocol max version Brijesh Singh
2021-11-12 1:29 ` [edk2-devel] " Ni, Ray
2021-11-10 22:14 ` [PATCH v12 26/32] UefiCpuPkg/MpLib: add support to register GHCB GPA when SEV-SNP is enabled Brijesh Singh
2021-11-12 1:48 ` Ni, Ray
2021-11-12 14:32 ` Brijesh Singh
2021-11-30 11:13 ` Ni, Ray
2021-11-10 22:14 ` Brijesh Singh [this message]
2021-11-12 1:53 ` [PATCH v12 27/32] UefiCpuPkg/MpInitLib: use BSP to do extended topology check Ni, Ray
2021-11-12 14:45 ` Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 28/32] OvmfPkg/MemEncryptSevLib: change the page state in the RMP table Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 29/32] OvmfPkg/MemEncryptSevLib: skip page state change for Mmio address Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 30/32] OvmfPkg/PlatformPei: mark cpuid and secrets memory reserved in EFI map Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 31/32] OvmfPkg/AmdSev: expose the SNP reserved pages through configuration table Brijesh Singh
2021-11-10 22:14 ` [PATCH v12 32/32] UefiCpuPkg/MpInitLib: Use SEV-SNP AP Creation NAE event to launch APs Brijesh Singh
2021-11-12 2:09 ` [edk2-devel] " Ni, Ray
2021-11-12 14:25 ` Brijesh Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211110221457.2397234-28-brijesh.singh@amd.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox