From: "Brijesh Singh" <brijesh.singh@amd.com>
To: <devel@edk2.groups.io>
Cc: James Bottomley <jejb@linux.ibm.com>, Min Xu <min.m.xu@intel.com>,
"Jiewen Yao" <jiewen.yao@intel.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
"Jordan Justen" <jordan.l.justen@intel.com>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Erdem Aktas <erdemaktas@google.com>,
"Michael Roth" <Michael.Roth@amd.com>,
Gerd Hoffmann <kraxel@redhat.com>,
"Michael D Kinney" <michael.d.kinney@intel.com>,
Liming Gao <gaoliming@byosoft.com.cn>,
Zhiguang Liu <zhiguang.liu@intel.com>, Ray Ni <ray.ni@intel.com>,
Rahul Kumar <rahul1.kumar@intel.com>,
Eric Dong <eric.dong@intel.com>,
Brijesh Singh <brijesh.singh@amd.com>,
Michael Roth <michael.roth@amd.com>
Subject: [PATCH v13 26/32] UefiCpuPkg/MpLib: add support to register GHCB GPA when SEV-SNP is enabled
Date: Fri, 12 Nov 2021 11:39:53 -0600 [thread overview]
Message-ID: <20211112173959.2505972-27-brijesh.singh@amd.com> (raw)
In-Reply-To: <20211112173959.2505972-1-brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
An SEV-SNP guest requires that the physical address of the GHCB must
be registered with the hypervisor before using it. See the GHCB
specification section 2.3.2 for more details.
Cc: Michael Roth <michael.roth@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
---
UefiCpuPkg/Library/MpInitLib/MpLib.h | 2 +
UefiCpuPkg/Library/MpInitLib/MpLib.c | 2 +
UefiCpuPkg/Library/MpInitLib/MpEqu.inc | 1 +
UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm | 54 ++++++++++++++++++++
4 files changed, 59 insertions(+)
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index 2107f3f705a2..45bc1de23e3c 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -222,6 +222,7 @@ typedef struct {
//
BOOLEAN Enable5LevelPaging;
BOOLEAN SevEsIsEnabled;
+ BOOLEAN SevSnpIsEnabled;
UINTN GhcbBase;
} MP_CPU_EXCHANGE_INFO;
@@ -291,6 +292,7 @@ struct _CPU_MP_DATA {
BOOLEAN WakeUpByInitSipiSipi;
BOOLEAN SevEsIsEnabled;
+ BOOLEAN SevSnpIsEnabled;
UINTN SevEsAPBuffer;
UINTN SevEsAPResetStackStart;
CPU_MP_DATA *NewCpuMpData;
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index b6c8a1a04d9f..315172fb937a 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -889,6 +889,7 @@ FillExchangeInfoData (
DEBUG ((DEBUG_INFO, "%a: 5-Level Paging = %d\n", gEfiCallerBaseName, ExchangeInfo->Enable5LevelPaging));
ExchangeInfo->SevEsIsEnabled = CpuMpData->SevEsIsEnabled;
+ ExchangeInfo->SevSnpIsEnabled = CpuMpData->SevSnpIsEnabled;
ExchangeInfo->GhcbBase = (UINTN) CpuMpData->GhcbBase;
//
@@ -1817,6 +1818,7 @@ MpInitLibInitialize (
CpuMpData->CpuInfoInHob = (UINT64) (UINTN) (CpuMpData->CpuData + MaxLogicalProcessorNumber);
InitializeSpinLock(&CpuMpData->MpLock);
CpuMpData->SevEsIsEnabled = ConfidentialComputingGuestHas (CCAttrAmdSevEs);
+ CpuMpData->SevSnpIsEnabled = ConfidentialComputingGuestHas (CCAttrAmdSevSnp);
CpuMpData->SevEsAPBuffer = (UINTN) -1;
CpuMpData->GhcbBase = PcdGet64 (PcdGhcbBase);
diff --git a/UefiCpuPkg/Library/MpInitLib/MpEqu.inc b/UefiCpuPkg/Library/MpInitLib/MpEqu.inc
index 2e9368a374a4..01668638f245 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpEqu.inc
+++ b/UefiCpuPkg/Library/MpInitLib/MpEqu.inc
@@ -92,6 +92,7 @@ struc MP_CPU_EXCHANGE_INFO
.ModeHighSegment: CTYPE_UINT16 1
.Enable5LevelPaging: CTYPE_BOOLEAN 1
.SevEsIsEnabled: CTYPE_BOOLEAN 1
+ .SevSnpIsEnabled CTYPE_BOOLEAN 1
.GhcbBase: CTYPE_UINTN 1
endstruc
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm b/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
index 0ccafe25eca4..0034920b2f6b 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
@@ -15,6 +15,57 @@
%define SIZE_4KB 0x1000
+RegisterGhcbGpa:
+ ;
+ ; Register GHCB GPA when SEV-SNP is enabled
+ ;
+ lea edi, [esi + MP_CPU_EXCHANGE_INFO_FIELD (SevSnpIsEnabled)]
+ cmp byte [edi], 1 ; SevSnpIsEnabled
+ jne RegisterGhcbGpaDone
+
+ ; Save the rdi and rsi to used for later comparison
+ push rdi
+ push rsi
+ mov edi, eax
+ mov esi, edx
+ or eax, 18 ; Ghcb registration request
+ wrmsr
+ rep vmmcall
+ rdmsr
+ mov r12, rax
+ and r12, 0fffh
+ cmp r12, 19 ; Ghcb registration response
+ jne GhcbGpaRegisterFailure
+
+ ; Verify that GPA is not changed
+ and eax, 0fffff000h
+ cmp edi, eax
+ jne GhcbGpaRegisterFailure
+ cmp esi, edx
+ jne GhcbGpaRegisterFailure
+ pop rsi
+ pop rdi
+ jmp RegisterGhcbGpaDone
+
+ ;
+ ; Request the guest termination
+ ;
+GhcbGpaRegisterFailure:
+ xor edx, edx
+ mov eax, 256 ; GHCB terminate
+ wrmsr
+ rep vmmcall
+
+ ; We should not return from the above terminate request, but if we do
+ ; then enter into the hlt loop.
+DoHltLoop:
+ cli
+ hlt
+ jmp DoHltLoop
+
+RegisterGhcbGpaDone:
+ OneTimeCallRet RegisterGhcbGpa
+
;
; The function checks whether SEV-ES is enabled, if enabled
; then setup the GHCB page.
@@ -39,6 +90,9 @@ SevEsSetupGhcb:
mov rdx, rax
shr rdx, 32
mov rcx, 0xc0010130
+
+ OneTimeCall RegisterGhcbGpa
+
wrmsr
SevEsSetupGhcbExit:
--
2.25.1
next prev parent reply other threads:[~2021-11-12 17:40 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-12 17:39 [PATCH v13 00/32] Add AMD Secure Nested Paging (SEV-SNP) support Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 01/32] OvmfPkg/SecMain: move SEV specific routines in AmdSev.c Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 02/32] UefiCpuPkg/MpInitLib: " Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 03/32] OvmfPkg/ResetVector: move clearing GHCB in SecMain Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 04/32] OvmfPkg/ResetVector: introduce SEV metadata descriptor for VMM use Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 05/32] OvmfPkg: reserve SNP secrets page Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 06/32] OvmfPkg: reserve CPUID page Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 07/32] OvmfPkg/ResetVector: pre-validate the data pages used in SEC phase Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 08/32] OvmfPkg/ResetVector: use SEV-SNP-validated CPUID values Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 09/32] OvmfPkg/MemEncryptSevLib: add MemEncryptSevSnpEnabled() Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 10/32] OvmfPkg/SecMain: register GHCB gpa for the SEV-SNP guest Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 11/32] OvmfPkg/VmgExitLib: use SEV-SNP-validated CPUID values Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 12/32] OvmfPkg/PlatformPei: register GHCB gpa for the SEV-SNP guest Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 13/32] OvmfPkg/AmdSevDxe: do not use extended PCI config space Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 14/32] OvmfPkg/MemEncryptSevLib: add support to validate system RAM Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 15/32] OvmfPkg/MemEncryptSevLib: add function to check the VMPL0 Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 16/32] OvmfPkg/BaseMemEncryptSevLib: skip the pre-validated system RAM Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 17/32] OvmfPkg/MemEncryptSevLib: add support to validate > 4GB memory in PEI phase Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 18/32] OvmfPkg/SecMain: validate the memory used for decompressing Fv Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 19/32] OvmfPkg/PlatformPei: validate the system RAM when SNP is active Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 20/32] MdePkg: Define ConfidentialComputingGuestAttr Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 21/32] OvmfPkg/PlatformPei: set PcdConfidentialComputingAttr when SEV is active Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 22/32] UefiCpuPkg/MpInitLib: use PcdConfidentialComputingAttr to check SEV status Brijesh Singh
2021-11-30 11:10 ` Ni, Ray
2021-11-12 17:39 ` [PATCH v13 23/32] UefiCpuPkg: add PcdGhcbHypervisorFeatures Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 24/32] OvmfPkg/PlatformPei: set the Hypervisor Features PCD Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 25/32] MdePkg/GHCB: increase the GHCB protocol max version Brijesh Singh
2021-11-12 17:39 ` Brijesh Singh [this message]
2021-11-12 17:39 ` [PATCH v13 27/32] UefiCpuPkg/MpInitLib: use BSP to do extended topology check Brijesh Singh
2021-11-30 11:16 ` Ni, Ray
2021-11-12 17:39 ` [PATCH v13 28/32] OvmfPkg/MemEncryptSevLib: change the page state in the RMP table Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 29/32] OvmfPkg/MemEncryptSevLib: skip page state change for Mmio address Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 30/32] OvmfPkg/PlatformPei: mark cpuid and secrets memory reserved in EFI map Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 31/32] OvmfPkg/AmdSev: expose the SNP reserved pages through configuration table Brijesh Singh
2021-11-12 17:39 ` [PATCH v13 32/32] UefiCpuPkg/MpInitLib: Use SEV-SNP AP Creation NAE event to launch APs Brijesh Singh
2021-11-26 15:21 ` [PATCH v13 00/32] Add AMD Secure Nested Paging (SEV-SNP) support Brijesh Singh
[not found] ` <16BB21DA37CA6E86.23256@groups.io>
2021-11-29 19:21 ` [edk2-devel] " Brijesh Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211112173959.2505972-27-brijesh.singh@amd.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox