From: "Maggie Chu" <maggie.chu@intel.com>
To: devel@edk2.groups.io
Cc: Liming Gao <gaoliming@byosoft.com.cn>,
Michael D Kinney <michael.d.kinney@intel.com>,
Zhiguang Liu <zhiguang.liu@intel.com>
Subject: [PATCH v2] MdePkg: Add registers of boot partition feature
Date: Sun, 26 Dec 2021 23:54:40 +0800 [thread overview]
Message-ID: <20211226155440.1726-1-maggie.chu@intel.com> (raw)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3757
Add registers of boot partition feature which defined in NVM Express 1.4 Spec
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
---
MdePkg/Include/IndustryStandard/Nvme.h | 108 ++++++++++++++++++++-----
1 file changed, 89 insertions(+), 19 deletions(-)
diff --git a/MdePkg/Include/IndustryStandard/Nvme.h b/MdePkg/Include/IndustryStandard/Nvme.h
index 7d4aee9dc8..8a2c747a85 100644
--- a/MdePkg/Include/IndustryStandard/Nvme.h
+++ b/MdePkg/Include/IndustryStandard/Nvme.h
@@ -2,11 +2,12 @@
Definitions based on NVMe spec. version 1.1.
(C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
- Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2017 - 2021, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@par Specification Reference:
NVMe Specification 1.1
+ NVMe Specification 1.4
**/
@@ -18,18 +19,21 @@
//
// controller register offsets
//
-#define NVME_CAP_OFFSET 0x0000 // Controller Capabilities
-#define NVME_VER_OFFSET 0x0008 // Version
-#define NVME_INTMS_OFFSET 0x000c // Interrupt Mask Set
-#define NVME_INTMC_OFFSET 0x0010 // Interrupt Mask Clear
-#define NVME_CC_OFFSET 0x0014 // Controller Configuration
-#define NVME_CSTS_OFFSET 0x001c // Controller Status
-#define NVME_NSSR_OFFSET 0x0020 // NVM Subsystem Reset
-#define NVME_AQA_OFFSET 0x0024 // Admin Queue Attributes
-#define NVME_ASQ_OFFSET 0x0028 // Admin Submission Queue Base Address
-#define NVME_ACQ_OFFSET 0x0030 // Admin Completion Queue Base Address
-#define NVME_SQ0_OFFSET 0x1000 // Submission Queue 0 (admin) Tail Doorbell
-#define NVME_CQ0_OFFSET 0x1004 // Completion Queue 0 (admin) Head Doorbell
+#define NVME_CAP_OFFSET 0x0000 // Controller Capabilities
+#define NVME_VER_OFFSET 0x0008 // Version
+#define NVME_INTMS_OFFSET 0x000c // Interrupt Mask Set
+#define NVME_INTMC_OFFSET 0x0010 // Interrupt Mask Clear
+#define NVME_CC_OFFSET 0x0014 // Controller Configuration
+#define NVME_CSTS_OFFSET 0x001c // Controller Status
+#define NVME_NSSR_OFFSET 0x0020 // NVM Subsystem Reset
+#define NVME_AQA_OFFSET 0x0024 // Admin Queue Attributes
+#define NVME_ASQ_OFFSET 0x0028 // Admin Submission Queue Base Address
+#define NVME_ACQ_OFFSET 0x0030 // Admin Completion Queue Base Address
+#define NVME_BPINFO_OFFSET 0x0040 // Boot Partition Information
+#define NVME_BPRSEL_OFFSET 0x0044 // Boot Partition Read Select
+#define NVME_BPMBL_OFFSET 0x0048 // Boot Partition Memory Buffer Location
+#define NVME_SQ0_OFFSET 0x1000 // Submission Queue 0 (admin) Tail Doorbell
+#define NVME_CQ0_OFFSET 0x1004 // Completion Queue 0 (admin) Head Doorbell
//
// These register offsets are defined as 0x1000 + (N * (4 << CAP.DSTRD))
@@ -51,11 +55,14 @@ typedef struct {
UINT8 To; // Timeout
UINT16 Dstrd : 4;
UINT16 Nssrs : 1; // NVM Subsystem Reset Supported NSSRS
- UINT16 Css : 4; // Command Sets Supported - Bit 37
- UINT16 Rsvd3 : 7;
+ UINT16 Css : 8; // Command Sets Supported - Bit 37
+ UINT16 Bps : 1; // Boot Partition Support - Bit 45 in NVMe1.4
+ UINT16 Rsvd3 : 2;
UINT8 Mpsmin : 4;
UINT8 Mpsmax : 4;
- UINT8 Rsvd4;
+ UINT8 Pmrs : 1;
+ UINT8 Cmbs : 1;
+ UINT8 Rsvd4 : 6;
} NVME_CAP;
//
@@ -115,7 +122,36 @@ typedef struct {
#define NVME_ACQ UINT64
//
-// 3.1.11 Offset (1000h + ((2y) * (4 << CAP.DSTRD))): SQyTDBL - Submission Queue y Tail Doorbell
+// 3.1.13 Offset 40h: BPINFO - Boot Partition Information
+//
+typedef struct {
+ UINT32 Bpsz : 15; // Boot Partition Size
+ UINT32 Rsvd1 : 9;
+ UINT32 Brs : 2; // Boot Read Status
+ UINT32 Rsvd2 : 5;
+ UINT32 Abpid : 1; // Active Boot Partition ID
+} NVME_BPINFO;
+
+//
+// 3.1.14 Offset 44h: BPRSEL - Boot Partition Read Select
+//
+typedef struct {
+ UINT32 Bprsz : 10; // Boot Partition Read Size
+ UINT32 Bprof : 20; // Boot Partition Read Offset
+ UINT32 Rsvd1 : 1;
+ UINT32 Bpid : 1; // Boot Partition Identifier
+} NVME_BPRSEL;
+
+//
+// 3.1.15 Offset 48h: BPMBL - Boot Partition Memory Buffer Location (Optional)
+//
+typedef struct {
+ UINT64 Rsvd1 : 12;
+ UINT64 Bmbba : 52; // Boot Partition Memory Buffer Base Address
+} NVME_BPMBL;
+
+//
+// 3.1.25 Offset (1000h + ((2y) * (4 << CAP.DSTRD))): SQyTDBL - Submission Queue y Tail Doorbell
//
typedef struct {
UINT16 Sqt;
@@ -353,7 +389,7 @@ typedef struct {
UINT8 Avscc; /* Admin Vendor Specific Command Configuration */
UINT8 Apsta; /* Autonomous Power State Transition Attributes */
//
- // Below fields before Rsvd2 are defined in NVM Express 1.3 Spec
+ // Below fields before Rsvd2 are defined in NVM Express 1.4 Spec
//
UINT16 Wctemp; /* Warning Composite Temperature Threshold */
UINT16 Cctemp; /* Critical Composite Temperature Threshold */
@@ -361,7 +397,12 @@ typedef struct {
UINT32 Hmpre; /* Host Memory Buffer Preferred Size */
UINT32 Hmmin; /* Host Memory Buffer Minimum Size */
UINT8 Tnvmcap[16]; /* Total NVM Capacity */
- UINT8 Rsvd2[216]; /* Reserved as of NVM Express */
+ UINT8 Unvmcap[16]; /* Unallocated NVM Capacity */
+ UINT32 Rpmbs; /* Replay Protected Memory Block Support */
+ UINT16 Edstt; /* Extended Device Self-test Time */
+ UINT8 Dsto; /* Device Self-test Options */
+ UINT8 Fwug; /* Firmware Update Granularity */
+ UINT8 Rsvd2[192]; /* Reserved as of Nvm Express 1.4 Spec */
//
// NVM Command Set Attributes
//
@@ -433,6 +474,34 @@ typedef struct {
UINT8 VendorData[3712]; /* Vendor specific data */
} NVME_ADMIN_NAMESPACE_DATA;
+//
+// RPMB Device Configuration Block Data Structure as of Nvm Express 1.4 Spec
+//
+typedef struct {
+ UINT8 Bppe; /* Boot Partition Protection Enable */
+ UINT8 Bpl; /* Boot Partition Lock */
+ UINT8 Nwpac; /* Namespace Write Protection Authentication Control */
+ UINT8 Rsvd1[509]; /* Reserved as of Nvm Express 1.4 Spec */
+} NVME_RPMB_CONFIGURATION_DATA;
+
+#define RPMB_FRAME_STUFF_BYTES 223
+
+//
+// RPMB Data Frame as of Nvm Express 1.4 Spec
+//
+typedef struct {
+ UINT8 Sbakamc[RPMB_FRAME_STUFF_BYTES]; /* [222-N:00] Stuff Bytes */
+ /* [222:222-(N-1)] Authentication Key or Message Authentication Code (MAC) */
+ UINT8 Rpmbt; /* RPMB Target */
+ UINT64 Nonce[2];
+ UINT32 Wcounter; /* Write Counter */
+ UINT32 Address; /* Starting address of data to be programmed to or read from the RPMB. */
+ UINT32 Scount; /* Sector Count */
+ UINT16 Result;
+ UINT16 Rpmessage; /* Request/Response Message */
+// UINT8 *Data; /* Data to be written or read by signed access where M = 512 * Sector Count. */
+} NVME_RPMB_DATA_FRAME;
+
//
// NvmExpress Admin Identify Cmd
//
@@ -564,6 +633,7 @@ typedef struct {
#define LID_ERROR_INFO 0x1
#define LID_SMART_INFO 0x2
#define LID_FW_SLOT_INFO 0x3
+ #define LID_BP_INFO 0x15
UINT32 Rsvd1 : 8;
UINT32 Numd : 12; /* Number of Dwords */
UINT32 Rsvd2 : 4; /* Reserved as of Nvm Express 1.1 Spec */
--
2.26.2.windows.1
next reply other threads:[~2021-12-26 15:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-26 15:54 Maggie Chu [this message]
2022-01-04 3:29 ` 回复: [PATCH v2] MdePkg: Add registers of boot partition feature gaoliming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211226155440.1726-1-maggie.chu@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox