From: "Guomin Jiang" <guomin.jiang@intel.com>
To: devel@edk2.groups.io
Cc: GuoMinJ <newexplorerj@gmail.com>, Bob Feng <bob.c.feng@intel.com>,
Liming Gao <gaoliming@byosoft.com.cn>,
Yuwei Chen <yuwei.chen@intel.com>
Subject: [PATCH 10/11] BaseTools: Remove All UGA Support
Date: Fri, 14 Jan 2022 08:50:43 +0800 [thread overview]
Message-ID: <20220114005044.1975-11-guomin.jiang@intel.com> (raw)
In-Reply-To: <20220114005044.1975-1-guomin.jiang@intel.com>
From: GuoMinJ <newexplorerj@gmail.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2368
Remove all UGA support in BaseTools package.
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
---
.../Source/C/Include/Protocol/HiiFramework.h | 53 +-----
BaseTools/Source/C/Include/Protocol/UgaDraw.h | 161 ------------------
2 files changed, 1 insertion(+), 213 deletions(-)
delete mode 100644 BaseTools/Source/C/Include/Protocol/UgaDraw.h
diff --git a/BaseTools/Source/C/Include/Protocol/HiiFramework.h b/BaseTools/Source/C/Include/Protocol/HiiFramework.h
index 448350967bbf..8cd2cb80c01c 100644
--- a/BaseTools/Source/C/Include/Protocol/HiiFramework.h
+++ b/BaseTools/Source/C/Include/Protocol/HiiFramework.h
@@ -6,7 +6,7 @@
@par Revision Reference:
This protocol is defined in HII spec 0.92.
- Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2007 - 2021, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -28,20 +28,6 @@
0xd7ad636e, 0xb997, 0x459b, {0xbf, 0x3f, 0x88, 0x46, 0x89, 0x79, 0x80, 0xe1} \
}
-// BugBug:
-//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-// If UGA goes away we need to put this some place. I'm not sure where?
-//
-//typedef struct {
-// UINT8 Blue;
-// UINT8 Green;
-// UINT8 Red;
-// UINT8 Reserved;
-//} EFI_UGA_PIXEL;
-
-//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-//
-
typedef struct _EFI_HII_PROTOCOL EFI_HII_PROTOCOL;
//
@@ -575,39 +561,6 @@ EFI_STATUS
IN OUT UINT32 *InternalStatus
);
-/**
- Translates a glyph into the format required for input to the Universal
- Graphics Adapter (UGA) Block Transfer (BLT) routines.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param GlyphBuffer A pointer to the buffer that contains glyph data.
- @param Foreground The foreground setting requested to be used for the
- generated BltBuffer data.
- @param Background The background setting requested to be used for the
- generated BltBuffer data.
- @param Count The entry in the BltBuffer upon which to act.
- @param Width The width in bits of the glyph being converted.
- @param Height The height in bits of the glyph being converted
- @param BltBuffer A pointer to the buffer that contains the data that is
- ready to be used by the UGA BLT routines.
-
- @retval EFI_SUCCESS It worked.
- @retval EFI_NOT_FOUND A glyph for a character was not found.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GLYPH_TO_BLT) (
- IN EFI_HII_PROTOCOL *This,
- IN UINT8 *GlyphBuffer,
- IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Foreground,
- IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Background,
- IN UINTN Count,
- IN UINTN Width,
- IN UINTN Height,
- IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer
- );
-
/**
Allows a new string to be added to an already existing string package.
@@ -878,9 +831,6 @@ EFI_STATUS
@param GetGlyph
Translates a Unicode character into the corresponding font glyph.
- @param GlyphToBlt
- Converts a glyph value into a format that is ready for a UGA BLT command.
-
@param NewString
Allows a new string to be added to an already existing string package.
@@ -924,7 +874,6 @@ struct _EFI_HII_PROTOCOL {
EFI_HII_TEST_STRING TestString;
EFI_HII_GET_GLYPH GetGlyph;
- EFI_HII_GLYPH_TO_BLT GlyphToBlt;
EFI_HII_NEW_STRING NewString;
EFI_HII_GET_PRI_LANGUAGES GetPrimaryLanguages;
diff --git a/BaseTools/Source/C/Include/Protocol/UgaDraw.h b/BaseTools/Source/C/Include/Protocol/UgaDraw.h
deleted file mode 100644
index 412b000aeb6b..000000000000
--- a/BaseTools/Source/C/Include/Protocol/UgaDraw.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/** @file
- UGA Draw protocol from the EFI 1.1 specification.
-
- Abstraction of a very simple graphics device.
-
- Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __UGA_DRAW_H__
-#define __UGA_DRAW_H__
-
-#define EFI_UGA_DRAW_PROTOCOL_GUID \
- { \
- 0x982c298b, 0xf4fa, 0x41cb, {0xb8, 0x38, 0x77, 0xaa, 0x68, 0x8f, 0xb8, 0x39 } \
- }
-
-typedef struct _EFI_UGA_DRAW_PROTOCOL EFI_UGA_DRAW_PROTOCOL;
-
-/**
- Return the current video mode information.
-
- @param This Protocol instance pointer.
- @param HorizontalResolution Current video horizontal resolution in pixels
- @param VerticalResolution Current video vertical resolution in pixels
- @param ColorDepth Current video color depth in bits per pixel
- @param RefreshRate Current video refresh rate in Hz.
-
- @retval EFI_SUCCESS Mode information returned.
- @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
- @retval EFI_INVALID_PARAMETER One of the input args was NULL.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_UGA_DRAW_PROTOCOL_GET_MODE) (
- IN EFI_UGA_DRAW_PROTOCOL *This,
- OUT UINT32 *HorizontalResolution,
- OUT UINT32 *VerticalResolution,
- OUT UINT32 *ColorDepth,
- OUT UINT32 *RefreshRate
- )
-;
-
-/**
- Return the current video mode information.
-
- @param This Protocol instance pointer.
- @param HorizontalResolution Current video horizontal resolution in pixels
- @param VerticalResolution Current video vertical resolution in pixels
- @param ColorDepth Current video color depth in bits per pixel
- @param RefreshRate Current video refresh rate in Hz.
-
- @retval EFI_SUCCESS Mode information returned.
- @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_UGA_DRAW_PROTOCOL_SET_MODE) (
- IN EFI_UGA_DRAW_PROTOCOL *This,
- IN UINT32 HorizontalResolution,
- IN UINT32 VerticalResolution,
- IN UINT32 ColorDepth,
- IN UINT32 RefreshRate
- )
-;
-
-typedef struct {
- UINT8 Blue;
- UINT8 Green;
- UINT8 Red;
- UINT8 Reserved;
-} EFI_UGA_PIXEL;
-
-typedef union {
- EFI_UGA_PIXEL Pixel;
- UINT32 Raw;
-} EFI_UGA_PIXEL_UNION;
-
-typedef enum {
- EfiUgaVideoFill,
- EfiUgaVideoToBltBuffer,
- EfiUgaBltBufferToVideo,
- EfiUgaVideoToVideo,
- EfiUgaBltMax
-} EFI_UGA_BLT_OPERATION;
-
-/**
- Type specifying a pointer to a function to perform an UGA Blt operation.
-
- The following table defines actions for BltOperations:
-
- <B>EfiUgaVideoFill</B> - Write data from the BltBuffer pixel (SourceX, SourceY)
- directly to every pixel of the video display rectangle
- (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
- Only one pixel will be used from the BltBuffer. Delta is NOT used.
-
- <B>EfiUgaVideoToBltBuffer</B> - Read data from the video display rectangle
- (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in
- the BltBuffer rectangle (DestinationX, DestinationY )
- (DestinationX + Width, DestinationY + Height). If DestinationX or
- DestinationY is not zero then Delta must be set to the length in bytes
- of a row in the BltBuffer.
-
- <B>EfiUgaBltBufferToVideo</B> - Write data from the BltBuffer rectangle
- (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the
- video display rectangle (DestinationX, DestinationY)
- (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is
- not zero then Delta must be set to the length in bytes of a row in the
- BltBuffer.
-
- <B>EfiUgaVideoToVideo</B> - Copy from the video display rectangle (SourceX, SourceY)
- (SourceX + Width, SourceY + Height) .to the video display rectangle
- (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
- The BltBuffer and Delta are not used in this mode.
-
-
- @param[in] This - Protocol instance pointer.
- @param[in] BltBuffer - Buffer containing data to blit into video buffer. This
- buffer has a size of Width*Height*sizeof(EFI_UGA_PIXEL)
- @param[in] BltOperation - Operation to perform on BlitBuffer and video memory
- @param[in] SourceX - X coordinate of source for the BltBuffer.
- @param[in] SourceY - Y coordinate of source for the BltBuffer.
- @param[in] DestinationX - X coordinate of destination for the BltBuffer.
- @param[in] DestinationY - Y coordinate of destination for the BltBuffer.
- @param[in] Width - Width of rectangle in BltBuffer in pixels.
- @param[in] Height - Height of rectangle in BltBuffer in pixels.
- @param[in] Delta - OPTIONAL
-
- @retval EFI_SUCCESS - The Blt operation completed.
- @retval EFI_INVALID_PARAMETER - BltOperation is not valid.
- @retval EFI_DEVICE_ERROR - A hardware error occurred writing to the video buffer.
-
---*/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_UGA_DRAW_PROTOCOL_BLT) (
- IN EFI_UGA_DRAW_PROTOCOL * This,
- IN EFI_UGA_PIXEL * BltBuffer, OPTIONAL
- IN EFI_UGA_BLT_OPERATION BltOperation,
- IN UINTN SourceX,
- IN UINTN SourceY,
- IN UINTN DestinationX,
- IN UINTN DestinationY,
- IN UINTN Width,
- IN UINTN Height,
- IN UINTN Delta OPTIONAL
- );
-
-struct _EFI_UGA_DRAW_PROTOCOL {
- EFI_UGA_DRAW_PROTOCOL_GET_MODE GetMode;
- EFI_UGA_DRAW_PROTOCOL_SET_MODE SetMode;
- EFI_UGA_DRAW_PROTOCOL_BLT Blt;
-};
-
-extern EFI_GUID gEfiUgaDrawProtocolGuid;
-
-#endif
--
2.30.0.windows.2
next prev parent reply other threads:[~2022-01-14 0:51 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-14 0:50 [PATCH 00/11] Remove All UGA support Guomin Jiang
2022-01-14 0:50 ` [PATCH 01/11] UefiPayloadPkg: Remove All UGA Support Guomin Jiang
2022-01-17 18:05 ` Guo Dong
2022-01-14 0:50 ` [PATCH 02/11] ArmVirtPkg: " Guomin Jiang
2022-01-29 16:18 ` Ard Biesheuvel
2022-01-31 14:27 ` Leif Lindholm
2022-01-14 0:50 ` [PATCH 03/11] ArmPkg: " Guomin Jiang
2022-01-14 0:50 ` [PATCH 04/11] EmulatorPkg: " Guomin Jiang
2022-01-14 0:50 ` [PATCH 05/11] ShellPkg: " Guomin Jiang
2022-01-14 0:50 ` [PATCH 06/11] OvmfPkg: " Guomin Jiang
2022-01-14 0:50 ` [PATCH 07/11] MdeModulePkg/ConSplitterDxe: " Guomin Jiang
2022-01-14 0:50 ` [PATCH 08/11] MdeModulePkg/GraphicsConsoleDxe: " Guomin Jiang
2022-01-14 0:50 ` [PATCH 09/11] MdeModulePkg: " Guomin Jiang
2022-01-14 0:50 ` Guomin Jiang [this message]
2022-01-14 0:50 ` [PATCH 11/11] MdePkg: " Guomin Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220114005044.1975-11-guomin.jiang@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox