From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from loongson.cn (loongson.cn [114.242.206.163]) by mx.groups.io with SMTP id smtpd.web08.5316.1646210705836160181 for ; Wed, 02 Mar 2022 00:45:08 -0800 Authentication-Results: mx.groups.io; dkim=missing; spf=pass (domain: loongson.cn, ip: 114.242.206.163, mailfrom: lixianglai@loongson.cn) Received: from localhost.localdomain (unknown [10.2.5.185]) by mail.loongson.cn (Coremail) with SMTP id AQAAf9Dxn89_Lh9i7TkBAA--.6283S13; Wed, 02 Mar 2022 16:44:53 +0800 (CST) From: "xianglai" To: devel@edk2.groups.io Subject: [edk2-platforms][PATCH V1 11/15] Platform/Loongson: Add timer Dxe driver. Date: Wed, 2 Mar 2022 03:44:43 -0500 Message-Id: <20220302084447.2991355-12-lixianglai@loongson.cn> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20220302084447.2991355-1-lixianglai@loongson.cn> References: <20220302084447.2991355-1-lixianglai@loongson.cn> MIME-Version: 1.0 X-CM-TRANSID: AQAAf9Dxn89_Lh9i7TkBAA--.6283S13 X-Coremail-Antispam: 1UD129KBjvAXoWfGw4fXw15JrWkuw1DWryDKFg_yoW8ZF1UWo W09a9Fvw48Gr18Xa98JFyxJ3W2qFn5uws0qrsYgFykAFnYyw15Kr9FvFy5Kw1fZrW8GFsr A34xWa4kJFZxX3Z5n29KB7ZKAUJUUUU8529EdanIXcx71UUUUU7v73VFW2AGmfu7bjvjm3 AaLaJ3UjIYCTnIWjDUYxBIdaVFxhVjvjDU0xZFpf9x0zRUUUUUUUUU= X-CM-SenderInfo: 5ol0xt5qjotxo6or00hjvr0hdfq/ Content-Transfer-Encoding: quoted-printable This driver produces Timer Architectural Protocol, Registers a timer interrupt and initializes the timer. Signed-off-by: xianglai li --- .../Drivers/StableTimerDxe/Timer.c | 405 ++++++++++++++++++ .../Drivers/StableTimerDxe/Timer.h | 166 +++++++ .../Drivers/StableTimerDxe/TimerDxe.inf | 40 ++ 3 files changed, 611 insertions(+) create mode 100644 Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerD= xe/Timer.c create mode 100644 Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerD= xe/Timer.h create mode 100644 Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerD= xe/TimerDxe.inf diff --git a/Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerDxe/Time= r.c b/Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerDxe/Timer.c new file mode 100644 index 0000000000..29e10566b5 --- /dev/null +++ b/Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerDxe/Timer.c @@ -0,0 +1,405 @@ +/** @file=0D + Timer Architectural Protocol as defined in the DXE CIS=0D +=0D + Copyright (c) 2021 Loongson Technology Corporation Limited. All rights r= eserved.
=0D +=0D + SPDX-License-Identifier: BSD-2-Clause-Patent=0D +=0D +**/=0D +=0D +#include =0D +#include "Library/Cpu.h"=0D +#include =0D +#include =0D +#include "Timer.h"=0D +#include =0D +#include =0D +=0D +//=0D +// The handle onto which the Timer Architectural Protocol will be installe= d=0D +//=0D +EFI_HANDLE mTimerHandle =3D NULL;=0D +EFI_EVENT EfiExitBootServicesEvent =3D (EFI_EVENT)NULL;=0D +=0D +//=0D +// The Timer Architectural Protocol that this driver produces=0D +//=0D +EFI_TIMER_ARCH_PROTOCOL mTimer =3D {=0D + TimerDriverRegisterHandler,=0D + TimerDriverSetTimerPeriod,=0D + TimerDriverGetTimerPeriod,=0D + TimerDriverGenerateSoftInterrupt=0D +};=0D +=0D +//=0D +// Pointer to the CPU Architectural Protocol instance=0D +//=0D +EFI_CPU_ARCH_PROTOCOL *mCpu;=0D +=0D +//=0D +// The notification function to call on every timer interrupt.=0D +// A bug in the compiler prevents us from initializing this here.=0D +//=0D +EFI_TIMER_NOTIFY mTimerNotifyFunction;=0D +=0D +//=0D +// The current period of the timer interrupt=0D +//=0D +volatile UINT64 mTimerPeriod =3D 0;=0D +volatile UINT64 mTimerTicks =3D 0;=0D +=0D +//=0D +// Const frequence in Hz=0D +//=0D +extern UINT32 StableTimerFreq;=0D +=0D +/**=0D + Sets the counter value for timer.=0D +=0D + @param Count The 16-bit counter value to program into stable timer.=0D +=0D + @retval VOID=0D +**/=0D +VOID=0D +SetPitCount (=0D + IN UINT64 Count=0D + )=0D +{=0D + if (Count <=3D 4) {=0D + return;=0D + }=0D +=0D + Count &=3D LOONGARCH_CSR_TMCFG_TIMEVAL;=0D + Count |=3D LOONGARCH_CSR_TMCFG_EN | LOONGARCH_CSR_TMCFG_PERIOD;=0D + LOONGARCH_CSR_WRITEQ (Count, LOONGARCH_CSR_TMCFG);=0D +}=0D +=0D +/**=0D + Timer Interrupt Handler.=0D +=0D + @param InterruptType The type of interrupt that occurred=0D + @param SystemContext A pointer to the system context when the interru= pt occurred=0D +=0D + @retval VOID=0D +**/=0D +VOID=0D +EFIAPI=0D +TimerInterruptHandler (=0D + IN EFI_EXCEPTION_TYPE InterruptType,=0D + IN EFI_SYSTEM_CONTEXT SystemContext=0D + )=0D +{=0D + EFI_TPL OriginalTPL;=0D +=0D + OriginalTPL =3D gBS->RaiseTPL (TPL_HIGH_LEVEL);=0D +=0D + //=0D + // Clear interrupt.=0D + //=0D + LOONGARCH_CSR_WRITEQ (0x1, LOONGARCH_CSR_TINTCLR);=0D +=0D + if (mTimerNotifyFunction !=3D NULL) {=0D + //=0D + // @bug : This does not handle missed timer interrupts=0D + //=0D + mTimerNotifyFunction (mTimerPeriod);=0D + }=0D +=0D + gBS->RestoreTPL (OriginalTPL);=0D +}=0D +=0D +/**=0D +=0D + This function registers the handler NotifyFunction so it is called every= time=0D + the timer interrupt fires. It also passes the amount of time since the = last=0D + handler call to the NotifyFunction. If NotifyFunction is NULL, then the= =0D + handler is unregistered. If the handler is registered, then EFI_SUCCESS= is=0D + returned. If the CPU does not support registering a timer interrupt han= dler,=0D + then EFI_UNSUPPORTED is returned. If an attempt is made to register a h= andler=0D + when a handler is already registered, then EFI_ALREADY_STARTED is return= ed.=0D + If an attempt is made to unregister a handler when a handler is not regi= stered,=0D + then EFI_INVALID_PARAMETER is returned. If an error occurs attempting t= o=0D + register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ER= ROR=0D + is returned.=0D +=0D +=0D + @param This The EFI_TIMER_ARCH_PROTOCOL instance.=0D + @param NotifyFunction The function to call when a timer interrupt fire= s. This=0D + function executes at TPL_HIGH_LEVEL. The DXE Co= re will=0D + register a handler for the timer interrupt, so i= t can know=0D + how much time has passed. This information is u= sed to=0D + signal timer based events. NULL will unregister= the handler.=0D +=0D + @retval EFI_SUCCESS The timer handler was registered.= =0D + @retval EFI_UNSUPPORTED The platform does not support time= r interrupts.=0D + @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a = handler is already=0D + registered.=0D + @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a hand= ler was not=0D + previously registered.=0D + @retval EFI_DEVICE_ERROR The timer handler could not be reg= istered.=0D +=0D +**/=0D +EFI_STATUS=0D +EFIAPI=0D +TimerDriverRegisterHandler (=0D + IN EFI_TIMER_ARCH_PROTOCOL *This,=0D + IN EFI_TIMER_NOTIFY NotifyFunction=0D + )=0D +{=0D + //=0D + // Check for invalid parameters=0D + //=0D + if ((NotifyFunction =3D=3D NULL)=0D + && (mTimerNotifyFunction =3D=3D NULL))=0D + {=0D + return EFI_INVALID_PARAMETER;=0D + }=0D +=0D + if ((NotifyFunction !=3D NULL)=0D + && mTimerNotifyFunction !=3D NULL)=0D + {=0D + return EFI_ALREADY_STARTED;=0D + }=0D +=0D + mTimerNotifyFunction =3D NotifyFunction;=0D +=0D + return EFI_SUCCESS;=0D +}=0D +=0D +/**=0D +=0D + This function adjusts the period of timer interrupts to the value specif= ied=0D + by TimerPeriod. If the timer period is updated, then the selected timer= =0D + period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. = If=0D + the timer hardware is not programmable, then EFI_UNSUPPORTED is returned= .=0D + If an error occurs while attempting to update the timer period, then the= =0D + timer hardware will be put back in its state prior to this call, and=0D + EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer inter= rupt=0D + is disabled. This is not the same as disabling the CPU's interrupts.=0D + Instead, it must either turn off the timer hardware, or it must adjust t= he=0D + interrupt controller so that a CPU interrupt is not generated when the t= imer=0D + interrupt fires.=0D +=0D +=0D + @param This The EFI_TIMER_ARCH_PROTOCOL instance.=0D + @param TimerPeriod The rate to program the timer interrupt in 100 nS= units. If=0D + the timer hardware is not programmable, then EFI_= UNSUPPORTED is=0D + returned. If the timer is programmable, then the= timer period=0D + will be rounded up to the nearest timer period th= at is supported=0D + by the timer hardware. If TimerPeriod is set to = 0, then the=0D + timer interrupts will be disabled.=0D +=0D + @retval EFI_SUCCESS The timer period was changed.=0D + @retval EFI_UNSUPPORTED The platform cannot change the period o= f the timer interrupt.=0D + @retval EFI_DEVICE_ERROR The timer period could not be changed d= ue to a device error.=0D +=0D +**/=0D +EFI_STATUS=0D +EFIAPI=0D +TimerDriverSetTimerPeriod (=0D + IN EFI_TIMER_ARCH_PROTOCOL *This,=0D + IN UINT64 TimerPeriod=0D + )=0D +{=0D + UINT64 TimerCount;=0D +=0D + if (TimerPeriod =3D=3D 0) {=0D + //=0D + // Disable timer interrupt for a TimerPeriod of 0=0D + //=0D + mCpu->DisableInterrupt (mCpu);=0D + } else {=0D +=0D + TimerCount =3D TimerPeriod * StableTimerFreq / 10000000ULL;=0D +=0D + if (TimerCount >=3D BIT48) {=0D + TimerCount =3D 0;=0D + }=0D +=0D + //=0D + // Program the stable timer with the new count value=0D + //=0D + mTimerTicks =3D TimerCount;=0D + SetPitCount (TimerCount);=0D +=0D + //=0D + // Enable timer interrupt=0D + //=0D + mCpu->EnableInterrupt (mCpu);=0D + }=0D +=0D + //=0D + // Save the new timer period=0D + //=0D + mTimerPeriod =3D TimerPeriod;=0D +=0D + return EFI_SUCCESS;=0D +}=0D +=0D +/**=0D +=0D + This function retrieves the period of timer interrupts in 100 ns units,= =0D + returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPer= iod=0D + is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 = is=0D + returned, then the timer is currently disabled.=0D +=0D +=0D + @param This The EFI_TIMER_ARCH_PROTOCOL instance.=0D + @param TimerPeriod A pointer to the timer period to retrieve in 100 = ns units. If=0D + 0 is returned, then the timer is currently disabl= ed.=0D +=0D + @retval EFI_SUCCESS The timer period was returned in TimerPer= iod.=0D + @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.=0D +=0D +**/=0D +EFI_STATUS=0D +EFIAPI=0D +TimerDriverGetTimerPeriod (=0D + IN EFI_TIMER_ARCH_PROTOCOL *This,=0D + OUT UINT64 *TimerPeriod=0D + )=0D +{=0D + if (TimerPeriod =3D=3D NULL) {=0D + return EFI_INVALID_PARAMETER;=0D + }=0D +=0D + *TimerPeriod =3D mTimerPeriod;=0D +=0D + return EFI_SUCCESS;=0D +}=0D +=0D +/**=0D + Disable the timer=0D +**/=0D +=0D +/**=0D + Disable the timer=0D + DXE Core will disable the timer after all the event handlers have run.=0D +=0D + @param[in] Event The Event that is being processed=0D + @param[in] Context Event Context=0D +**/=0D +VOID=0D +EFIAPI=0D +ExitBootServicesEvent (=0D + IN EFI_EVENT Event,=0D + IN VOID *Context=0D + )=0D +{=0D + /*=0D + * Disable timer interrupt when exiting boot service=0D + */=0D + LOONGARCH_CSR_WRITEQ (0, LOONGARCH_CSR_TMCFG);=0D +}=0D +=0D +/**=0D +=0D + This function generates a soft timer interrupt. If the platform does not= support soft=0D + timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCE= SS is returned.=0D + If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.Reg= isterHandler ()=0D + service, then a soft timer interrupt will be generated. If the timer int= errupt is=0D + enabled when this service is called, then the registered handler will be= invoked. The=0D + registered handler should not be able to distinguish a hardware-generate= d timer=0D + interrupt from a software-generated timer interrupt.=0D +=0D +=0D + @param This The EFI_TIMER_ARCH_PROTOCOL instance.=0D +=0D + @retval EFI_SUCCESS The soft timer interrupt was generated.=0D + @retval EFI_UNSUPPORTED The platform does not support the generation o= f soft timer interrupts.=0D +=0D +**/=0D +EFI_STATUS=0D +EFIAPI=0D +TimerDriverGenerateSoftInterrupt (=0D + IN EFI_TIMER_ARCH_PROTOCOL *This=0D + )=0D +{=0D + return EFI_UNSUPPORTED;=0D +}=0D +=0D +/**=0D + Initialize the Timer Architectural Protocol driver=0D +=0D + @param ImageHandle ImageHandle of the loaded driver=0D + @param SystemTable Pointer to the System Table=0D +=0D + @retval EFI_SUCCESS Timer Architectural Protocol created=0D + @retval EFI_OUT_OF_RESOURCES Not enough resources available to initial= ize driver.=0D + @retval EFI_DEVICE_ERROR A device error occurred attempting to ini= tialize the driver.=0D +=0D +**/=0D +EFI_STATUS=0D +EFIAPI=0D +StableTimerDriverInitialize (=0D + IN EFI_HANDLE ImageHandle,=0D + IN EFI_SYSTEM_TABLE *SystemTable=0D + )=0D +{=0D + EFI_STATUS Status;=0D + UINT32 TimerVector;=0D +=0D + //=0D + // Initialize the pointer to our notify function.=0D + //=0D + mTimerNotifyFunction =3D NULL;=0D +=0D + //=0D + // Make sure the Timer Architectural Protocol is not already installed i= n the system=0D + //=0D + ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiTimerArchProtocolGuid);=0D +=0D + //=0D + // Find the CPU architectural protocol.=0D + //=0D + Status =3D gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL, (VOID **= ) &mCpu);=0D + ASSERT_EFI_ERROR (Status);=0D +=0D + //=0D + // Force the timer to be disabled=0D + //=0D + Status =3D TimerDriverSetTimerPeriod (&mTimer, 0);=0D + ASSERT_EFI_ERROR (Status);=0D +=0D + //=0D + // Calculate const frequence=0D + //=0D + StableTimerFreq =3D CalcConstFreq ();=0D + DEBUG ((DEBUG_INFO, "=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3DStable timer freq = %d Hz=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D\n", StableTimerFreq));=0D +=0D + //=0D + // Install interrupt handler for Stable Timer #0 (ISA IRQ0)=0D + //=0D + TimerVector =3D 0;=0D + Status =3D mCpu->RegisterInterruptHandler (mCpu, TimerVector, TimerInter= ruptHandler);=0D + ASSERT_EFI_ERROR (Status);=0D +=0D + //=0D + // Enable TI local timer interrupt=0D + //=0D + CpuSetIP (1 << 11);=0D +=0D + //=0D + // Force the timer to be enabled at its default period=0D + //=0D + Status =3D TimerDriverSetTimerPeriod (&mTimer, DEFAULT_TIMER_TICK_DURATI= ON);=0D + ASSERT_EFI_ERROR (Status);=0D +=0D + //=0D + // Install the Timer Architectural Protocol onto a new handle=0D + //=0D + Status =3D gBS->InstallMultipleProtocolInterfaces (=0D + &mTimerHandle,=0D + &gEfiTimerArchProtocolGuid, &mTimer,=0D + NULL=0D + );=0D +=0D + ASSERT_EFI_ERROR (Status);=0D +=0D + // Register for an ExitBootServicesEvent=0D + Status =3D gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_NOTIFY, = ExitBootServicesEvent, NULL,=0D + &EfiExitBootServicesEvent);=0D + ASSERT_EFI_ERROR (Status);=0D +=0D + return Status;=0D +}=0D diff --git a/Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerDxe/Time= r.h b/Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerDxe/Timer.h new file mode 100644 index 0000000000..acc699b41b --- /dev/null +++ b/Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerDxe/Timer.h @@ -0,0 +1,166 @@ +/** @file=0D + Private data structures=0D +=0D + Copyright (c) 2021 Loongson Technology Corporation Limited. All rights r= eserved.
=0D +=0D + SPDX-License-Identifier: BSD-2-Clause-Patent=0D +=0D +**/=0D +=0D +#ifndef TIMER_H_=0D +#define TIMER_H_=0D +=0D +#include =0D +=0D +=0D +#define DEFAULT_TIMER_TICK_DURATION 100000 //10ms =3D 100000 100 ns units= =0D +#define SR_IP7 (1 << 15)=0D +//=0D +// Function Prototypes=0D +//=0D +=0D +extern UINT32 EFIAPI CpuGetCompare(VOID);=0D +extern VOID EFIAPI CpuSetCompare(IN UINT32 val);=0D +extern VOID EFIAPI CpuSetIP(IN UINT32 val);=0D +extern VOID EFIAPI ClearC0Cause(IN UINT32 val);=0D +extern VOID EFIAPI ClearC0Status(IN UINT32 val);=0D +/**=0D + Initialize the Timer Architectural Protocol driver=0D +=0D + @param ImageHandle ImageHandle of the loaded driver=0D + @param SystemTable Pointer to the System Table=0D +=0D + @retval EFI_SUCCESS Timer Architectural Protocol created=0D + @retval EFI_OUT_OF_RESOURCES Not enough resources available to initial= ize driver.=0D + @retval EFI_DEVICE_ERROR A device error occurred attempting to ini= tialize the driver.=0D +=0D +**/=0D +EFI_STATUS=0D +EFIAPI=0D +TimerDriverInitialize (=0D + IN EFI_HANDLE ImageHandle,=0D + IN EFI_SYSTEM_TABLE *SystemTable=0D + )=0D +;=0D +=0D +/**=0D +=0D + This function adjusts the period of timer interrupts to the value specif= ied=0D + by TimerPeriod. If the timer period is updated, then the selected timer= =0D + period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. = If=0D + the timer hardware is not programmable, then EFI_UNSUPPORTED is returned= .=0D + If an error occurs while attempting to update the timer period, then the= =0D + timer hardware will be put back in its state prior to this call, and=0D + EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer inter= rupt=0D + is disabled. This is not the same as disabling the CPU's interrupts.=0D + Instead, it must either turn off the timer hardware, or it must adjust t= he=0D + interrupt controller so that a CPU interrupt is not generated when the t= imer=0D + interrupt fires.=0D +=0D +=0D + @param This The EFI_TIMER_ARCH_PROTOCOL instance.=0D + @param NotifyFunction The rate to program the timer interrupt in 100 nS= units. If=0D + the timer hardware is not programmable, then EFI_= UNSUPPORTED is=0D + returned. If the timer is programmable, then the= timer period=0D + will be rounded up to the nearest timer period th= at is supported=0D + by the timer hardware. If TimerPeriod is set to = 0, then the=0D + timer interrupts will be disabled.=0D +=0D + @retval EFI_SUCCESS The timer period was changed.=0D + @retval EFI_UNSUPPORTED The platform cannot change the period o= f the timer interrupt.=0D + @retval EFI_DEVICE_ERROR The timer period could not be changed d= ue to a device error.=0D +=0D +**/=0D +EFI_STATUS=0D +EFIAPI=0D +TimerDriverRegisterHandler (=0D + IN EFI_TIMER_ARCH_PROTOCOL *This,=0D + IN EFI_TIMER_NOTIFY NotifyFunction=0D + )=0D +;=0D +=0D +/**=0D +=0D + This function adjusts the period of timer interrupts to the value specif= ied=0D + by TimerPeriod. If the timer period is updated, then the selected timer= =0D + period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. = If=0D + the timer hardware is not programmable, then EFI_UNSUPPORTED is returned= .=0D + If an error occurs while attempting to update the timer period, then the= =0D + timer hardware will be put back in its state prior to this call, and=0D + EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer inter= rupt=0D + is disabled. This is not the same as disabling the CPU's interrupts.=0D + Instead, it must either turn off the timer hardware, or it must adjust t= he=0D + interrupt controller so that a CPU interrupt is not generated when the t= imer=0D + interrupt fires.=0D +=0D +=0D + @param This The EFI_TIMER_ARCH_PROTOCOL instance.=0D + @param TimerPeriod The rate to program the timer interrupt in 100 nS= units. If=0D + the timer hardware is not programmable, then EFI_= UNSUPPORTED is=0D + returned. If the timer is programmable, then the= timer period=0D + will be rounded up to the nearest timer period th= at is supported=0D + by the timer hardware. If TimerPeriod is set to = 0, then the=0D + timer interrupts will be disabled.=0D +=0D + @retval EFI_SUCCESS The timer period was changed.=0D + @retval EFI_UNSUPPORTED The platform cannot change the period o= f the timer interrupt.=0D + @retval EFI_DEVICE_ERROR The timer period could not be changed d= ue to a device error.=0D +=0D +**/=0D +EFI_STATUS=0D +EFIAPI=0D +TimerDriverSetTimerPeriod (=0D + IN EFI_TIMER_ARCH_PROTOCOL *This,=0D + IN UINT64 TimerPeriod=0D + )=0D +;=0D +=0D +/**=0D +=0D + This function retrieves the period of timer interrupts in 100 ns units,= =0D + returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPer= iod=0D + is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 = is=0D + returned, then the timer is currently disabled.=0D +=0D +=0D + @param This The EFI_TIMER_ARCH_PROTOCOL instance.=0D + @param TimerPeriod A pointer to the timer period to retrieve in 100 = ns units. If=0D + 0 is returned, then the timer is currently disabl= ed.=0D +=0D + @retval EFI_SUCCESS The timer period was returned in TimerPer= iod.=0D + @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.=0D +=0D +**/=0D +EFI_STATUS=0D +EFIAPI=0D +TimerDriverGetTimerPeriod (=0D + IN EFI_TIMER_ARCH_PROTOCOL *This,=0D + OUT UINT64 *TimerPeriod=0D + )=0D +;=0D +=0D +/**=0D +=0D + This function generates a soft timer interrupt. If the platform does not= support soft=0D + timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCE= SS is returned.=0D + If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.Reg= isterHandler()=0D + service, then a soft timer interrupt will be generated. If the timer int= errupt is=0D + enabled when this service is called, then the registered handler will be= invoked. The=0D + registered handler should not be able to distinguish a hardware-generate= d timer=0D + interrupt from a software-generated timer interrupt.=0D +=0D +=0D + @param This The EFI_TIMER_ARCH_PROTOCOL instance.=0D +=0D + @retval EFI_SUCCESS The soft timer interrupt was generated.=0D + @retval EFI_UNSUPPORTED The platform does not support the generation o= f soft timer interrupts.=0D +=0D +**/=0D +EFI_STATUS=0D +EFIAPI=0D +TimerDriverGenerateSoftInterrupt (=0D + IN EFI_TIMER_ARCH_PROTOCOL *This=0D + )=0D +;=0D +=0D +#endif=0D diff --git a/Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerDxe/Time= rDxe.inf b/Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerDxe/TimerD= xe.inf new file mode 100644 index 0000000000..10e6b9a85e --- /dev/null +++ b/Platform/Loongson/LoongArchQemuPkg/Drivers/StableTimerDxe/TimerDxe.inf @@ -0,0 +1,40 @@ +## @file=0D +# Stable timer driver that provides Timer Arch protocol.=0D +#=0D +# Copyright (c) 2021 Loongson Technology Corporation Limited. All rights = reserved.
=0D +#=0D +# SPDX-License-Identifier: BSD-2-Clause-Patent=0D +#=0D +##=0D +[Defines]=0D + INF_VERSION =3D 0x00010005=0D + BASE_NAME =3D Timer=0D + MODULE_UNI_FILE =3D Timer.uni=0D + FILE_GUID =3D AEBE2648-47A9-40FA-83FD-06AA88443BB2= =0D + MODULE_TYPE =3D DXE_DRIVER=0D + VERSION_STRING =3D 1.0=0D +=0D + ENTRY_POINT =3D StableTimerDriverInitialize=0D +=0D +[Packages]=0D + MdePkg/MdePkg.dec=0D + Platform/Loongson/LoongArchQemuPkg/Loongson.dec=0D +=0D +[LibraryClasses]=0D + UefiBootServicesTableLib=0D + BaseLib=0D + DebugLib=0D + UefiDriverEntryPoint=0D + IoLib=0D + TimerLib=0D +=0D +[Sources]=0D + Timer.h=0D + Timer.c=0D +=0D +[Protocols]=0D + gEfiCpuArchProtocolGuid ## CONSUMES=0D + gEfiTimerArchProtocolGuid ## PRODUCES=0D +=0D +[depex]=0D + TRUE=0D --=20 2.27.0