From: "Ni, Ray" <ray.ni@intel.com>
To: devel@edk2.groups.io
Cc: Eric Dong <eric.dong@intel.com>,
Rahul Kumar <rahul1.kumar@intel.com>,
Michael Roth <michael.roth@amd.com>,
James Bottomley <jejb@linux.ibm.com>, Min Xu <min.m.xu@intel.com>,
Jiewen Yao <jiewen.yao@intel.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
Jordan Justen <jordan.l.justen@intel.com>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Erdem Aktas <erdemaktas@google.com>,
Gerd Hoffmann <kraxel@redhat.com>
Subject: [PATCH 3/4] MpInitLib: Put SEV logic in separate file
Date: Sat, 7 May 2022 23:13:12 +0800 [thread overview]
Message-ID: <20220507151313.115-4-ray.ni@intel.com> (raw)
In-Reply-To: <20220507151313.115-1-ray.ni@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
---
.../Library/MpInitLib/Ia32/MpFuncs.nasm | 3 +-
UefiCpuPkg/Library/MpInitLib/MpLib.c | 13 +-
UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm | 148 +++++++++++++++++
UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 157 +-----------------
4 files changed, 159 insertions(+), 162 deletions(-)
diff --git a/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm b/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
index 8981c32722..67f9ed05cf 100644
--- a/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
@@ -199,7 +199,6 @@ CProcedureInvoke:
call eax ; Invoke C function
jmp $ ; Never reach here
-RendezvousFunnelProcEnd:
;-------------------------------------------------------------------------------------
;SwitchToRealProc procedure follows.
@@ -209,6 +208,8 @@ SwitchToRealProcStart:
jmp $ ; Never reach here
SwitchToRealProcEnd:
+RendezvousFunnelProcEnd:
+
;-------------------------------------------------------------------------------------
; AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack, CountTofinish, Pm16CodeSegment, SevEsAPJumpTable, WakeupBuffer);
;
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index 3dc1b9f872..722ff3fd42 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -938,8 +938,7 @@ FillExchangeInfoData (
// EfiBootServicesCode to avoid page fault if NX memory protection is enabled.
//
if (CpuMpData->WakeupBufferHigh != 0) {
- Size = CpuMpData->AddressMap.RendezvousFunnelSize +
- CpuMpData->AddressMap.SwitchToRealSize -
+ Size = CpuMpData->AddressMap.RendezvousFunnelSize -
CpuMpData->AddressMap.ModeTransitionOffset;
CopyMem (
(VOID *)CpuMpData->WakeupBufferHigh,
@@ -993,8 +992,7 @@ BackupAndPrepareWakeupBuffer (
CopyMem (
(VOID *)CpuMpData->WakeupBuffer,
(VOID *)CpuMpData->AddressMap.RendezvousFunnelAddress,
- CpuMpData->AddressMap.RendezvousFunnelSize +
- CpuMpData->AddressMap.SwitchToRealSize
+ CpuMpData->AddressMap.RendezvousFunnelSize
);
}
@@ -1031,7 +1029,6 @@ GetApResetVectorSize (
UINTN Size;
Size = AddressMap->RendezvousFunnelSize +
- AddressMap->SwitchToRealSize +
sizeof (MP_CPU_EXCHANGE_INFO);
return Size;
@@ -1056,11 +1053,9 @@ AllocateResetVector (
CpuMpData->WakeupBuffer = GetWakeupBuffer (ApResetVectorSize);
CpuMpData->MpCpuExchangeInfo = (MP_CPU_EXCHANGE_INFO *)(UINTN)
(CpuMpData->WakeupBuffer +
- CpuMpData->AddressMap.RendezvousFunnelSize +
- CpuMpData->AddressMap.SwitchToRealSize);
+ CpuMpData->AddressMap.RendezvousFunnelSize);
CpuMpData->WakeupBufferHigh = AllocateCodeBuffer (
- CpuMpData->AddressMap.RendezvousFunnelSize +
- CpuMpData->AddressMap.SwitchToRealSize -
+ CpuMpData->AddressMap.RendezvousFunnelSize -
CpuMpData->AddressMap.ModeTransitionOffset
);
//
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm b/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
index 8bb1161fa0..7c2469f9c5 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
@@ -198,3 +198,151 @@ RestoreGhcb:
SevEsGetApicIdExit:
OneTimeCallRet SevEsGetApicId
+
+
+;-------------------------------------------------------------------------------------
+;SwitchToRealProc procedure follows.
+;ALSO THIS PROCEDURE IS EXECUTED BY APs TRANSITIONING TO 16 BIT MODE. HENCE THIS PROC
+;IS IN MACHINE CODE.
+; SwitchToRealProc (UINTN BufferStart, UINT16 Code16, UINT16 Code32, UINTN StackStart)
+; rcx - Buffer Start
+; rdx - Code16 Selector Offset
+; r8 - Code32 Selector Offset
+; r9 - Stack Start
+;-------------------------------------------------------------------------------------
+SwitchToRealProcStart:
+BITS 64
+ cli
+
+ ;
+ ; Get RDX reset value before changing stacks since the
+ ; new stack won't be able to accomodate a #VC exception.
+ ;
+ push rax
+ push rbx
+ push rcx
+ push rdx
+
+ mov rax, 1
+ cpuid
+ mov rsi, rax ; Save off the reset value for RDX
+
+ pop rdx
+ pop rcx
+ pop rbx
+ pop rax
+
+ ;
+ ; Establish stack below 1MB
+ ;
+ mov rsp, r9
+
+ ;
+ ; Push ultimate Reset Vector onto the stack
+ ;
+ mov rax, rcx
+ shr rax, 4
+ push word 0x0002 ; RFLAGS
+ push ax ; CS
+ push word 0x0000 ; RIP
+ push word 0x0000 ; For alignment, will be discarded
+
+ ;
+ ; Get address of "16-bit operand size" label
+ ;
+ lea rbx, [PM16Mode]
+
+ ;
+ ; Push addresses used to change to compatibility mode
+ ;
+ lea rax, [CompatMode]
+ push r8
+ push rax
+
+ ;
+ ; Clear R8 - R15, for reset, before going into 32-bit mode
+ ;
+ xor r8, r8
+ xor r9, r9
+ xor r10, r10
+ xor r11, r11
+ xor r12, r12
+ xor r13, r13
+ xor r14, r14
+ xor r15, r15
+
+ ;
+ ; Far return into 32-bit mode
+ ;
+ retfq
+
+BITS 32
+CompatMode:
+ ;
+ ; Set up stack to prepare for exiting protected mode
+ ;
+ push edx ; Code16 CS
+ push ebx ; PM16Mode label address
+
+ ;
+ ; Disable paging
+ ;
+ mov eax, cr0 ; Read CR0
+ btr eax, 31 ; Set PG=0
+ mov cr0, eax ; Write CR0
+
+ ;
+ ; Disable long mode
+ ;
+ mov ecx, 0c0000080h ; EFER MSR number
+ rdmsr ; Read EFER
+ btr eax, 8 ; Set LME=0
+ wrmsr ; Write EFER
+
+ ;
+ ; Disable PAE
+ ;
+ mov eax, cr4 ; Read CR4
+ btr eax, 5 ; Set PAE=0
+ mov cr4, eax ; Write CR4
+
+ mov edx, esi ; Restore RDX reset value
+
+ ;
+ ; Switch to 16-bit operand size
+ ;
+ retf
+
+BITS 16
+ ;
+ ; At entry to this label
+ ; - RDX will have its reset value
+ ; - On the top of the stack
+ ; - Alignment data (two bytes) to be discarded
+ ; - IP for Real Mode (two bytes)
+ ; - CS for Real Mode (two bytes)
+ ;
+ ; This label is also used with AsmRelocateApLoop. During MP finalization,
+ ; the code from PM16Mode to SwitchToRealProcEnd is copied to the start of
+ ; the WakeupBuffer, allowing a parked AP to be booted by an OS.
+ ;
+PM16Mode:
+ mov eax, cr0 ; Read CR0
+ btr eax, 0 ; Set PE=0
+ mov cr0, eax ; Write CR0
+
+ pop ax ; Discard alignment data
+
+ ;
+ ; Clear registers (except RDX and RSP) before going into 16-bit mode
+ ;
+ xor eax, eax
+ xor ebx, ebx
+ xor ecx, ecx
+ xor esi, esi
+ xor edi, edi
+ xor ebp, ebp
+
+ iret
+
+SwitchToRealProcEnd:
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
index d7e0e1fabd..53df478661 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
@@ -152,11 +152,6 @@ SkipEnable5LevelPaging:
BITS 64
-;
-; Required for the AMD SEV helper functions
-;
-%include "AmdSev.nasm"
-
LongModeStart:
mov esi, ebx
lea edi, [esi + MP_CPU_EXCHANGE_INFO_FIELD (InitFlag)]
@@ -265,154 +260,12 @@ CProcedureInvoke:
add rsp, 20h
jmp $ ; Should never reach here
-RendezvousFunnelProcEnd:
-
-;-------------------------------------------------------------------------------------
-;SwitchToRealProc procedure follows.
-;ALSO THIS PROCEDURE IS EXECUTED BY APs TRANSITIONING TO 16 BIT MODE. HENCE THIS PROC
-;IS IN MACHINE CODE.
-; SwitchToRealProc (UINTN BufferStart, UINT16 Code16, UINT16 Code32, UINTN StackStart)
-; rcx - Buffer Start
-; rdx - Code16 Selector Offset
-; r8 - Code32 Selector Offset
-; r9 - Stack Start
-;-------------------------------------------------------------------------------------
-SwitchToRealProcStart:
-BITS 64
- cli
-
- ;
- ; Get RDX reset value before changing stacks since the
- ; new stack won't be able to accomodate a #VC exception.
- ;
- push rax
- push rbx
- push rcx
- push rdx
-
- mov rax, 1
- cpuid
- mov rsi, rax ; Save off the reset value for RDX
-
- pop rdx
- pop rcx
- pop rbx
- pop rax
-
- ;
- ; Establish stack below 1MB
- ;
- mov rsp, r9
-
- ;
- ; Push ultimate Reset Vector onto the stack
- ;
- mov rax, rcx
- shr rax, 4
- push word 0x0002 ; RFLAGS
- push ax ; CS
- push word 0x0000 ; RIP
- push word 0x0000 ; For alignment, will be discarded
-
- ;
- ; Get address of "16-bit operand size" label
- ;
- lea rbx, [PM16Mode]
-
- ;
- ; Push addresses used to change to compatibility mode
- ;
- lea rax, [CompatMode]
- push r8
- push rax
-
- ;
- ; Clear R8 - R15, for reset, before going into 32-bit mode
- ;
- xor r8, r8
- xor r9, r9
- xor r10, r10
- xor r11, r11
- xor r12, r12
- xor r13, r13
- xor r14, r14
- xor r15, r15
-
- ;
- ; Far return into 32-bit mode
- ;
- retfq
-
-BITS 32
-CompatMode:
- ;
- ; Set up stack to prepare for exiting protected mode
- ;
- push edx ; Code16 CS
- push ebx ; PM16Mode label address
-
- ;
- ; Disable paging
- ;
- mov eax, cr0 ; Read CR0
- btr eax, 31 ; Set PG=0
- mov cr0, eax ; Write CR0
-
- ;
- ; Disable long mode
- ;
- mov ecx, 0c0000080h ; EFER MSR number
- rdmsr ; Read EFER
- btr eax, 8 ; Set LME=0
- wrmsr ; Write EFER
-
- ;
- ; Disable PAE
- ;
- mov eax, cr4 ; Read CR4
- btr eax, 5 ; Set PAE=0
- mov cr4, eax ; Write CR4
-
- mov edx, esi ; Restore RDX reset value
-
- ;
- ; Switch to 16-bit operand size
- ;
- retf
-
-BITS 16
- ;
- ; At entry to this label
- ; - RDX will have its reset value
- ; - On the top of the stack
- ; - Alignment data (two bytes) to be discarded
- ; - IP for Real Mode (two bytes)
- ; - CS for Real Mode (two bytes)
- ;
- ; This label is also used with AsmRelocateApLoop. During MP finalization,
- ; the code from PM16Mode to SwitchToRealProcEnd is copied to the start of
- ; the WakeupBuffer, allowing a parked AP to be booted by an OS.
- ;
-PM16Mode:
- mov eax, cr0 ; Read CR0
- btr eax, 0 ; Set PE=0
- mov cr0, eax ; Write CR0
-
- pop ax ; Discard alignment data
-
- ;
- ; Clear registers (except RDX and RSP) before going into 16-bit mode
- ;
- xor eax, eax
- xor ebx, ebx
- xor ecx, ecx
- xor esi, esi
- xor edi, edi
- xor ebp, ebp
-
- iret
+;
+; Required for the AMD SEV helper functions
+;
+%include "AmdSev.nasm"
-SwitchToRealProcEnd:
+RendezvousFunnelProcEnd:
;-------------------------------------------------------------------------------------
; AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack, CountTofinish, Pm16CodeSegment, SevEsAPJumpTable, WakeupBuffer);
--
2.32.0.windows.1
next prev parent reply other threads:[~2022-05-07 15:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-07 15:13 [PATCH 0/4] Refactor MpInitLib Ni, Ray
2022-05-07 15:13 ` [PATCH 1/4] MpInitLib: Allocate code buffer for PEI phase Ni, Ray
2022-05-07 15:13 ` [PATCH 2/4] MpInitLib: remove unneeded global ASM_PFX Ni, Ray
2022-05-07 15:13 ` Ni, Ray [this message]
2022-05-12 14:13 ` [PATCH 3/4] MpInitLib: Put SEV logic in separate file Lendacky, Thomas
2022-05-16 3:51 ` Ni, Ray
2022-05-07 15:13 ` [PATCH 4/4] MpInitLib: Only allocate below 1MB memory for 16bit code Ni, Ray
[not found] ` <16ECDB685492F55B.14104@groups.io>
2022-05-09 11:54 ` [edk2-devel] [PATCH 3/4] MpInitLib: Put SEV logic in separate file Ni, Ray
2022-05-09 16:35 ` Lendacky, Thomas
2022-05-09 21:39 ` [edk2-devel] [PATCH 0/4] Refactor MpInitLib Lendacky, Thomas
2022-05-09 23:16 ` Ni, Ray
2022-05-10 14:44 ` Lendacky, Thomas
2022-05-10 15:13 ` Lendacky, Thomas
2022-05-12 1:21 ` Ni, Ray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220507151313.115-4-ray.ni@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox