[PATCH V1 1/1] MdeModulePkg: Add Definition of EDKII_PEI_VARIABLE_PPI

["Nate DeSimone" <nathaniel.l.desimone@intel.com>]

Adds definition of EDKII_PEI_VARIABLE_PPI, a pre-cursor
to enabling variable writes in the PEI environment.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Isaac Oram <isaac.w.oram@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Gao Cheng <gao.cheng@intel.com>
Cc: Di Zhang <di.zhang@intel.com>
Cc: Daocheng Bu <daocheng.bu@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
---
 MdeModulePkg/Include/Ppi/Variable.h | 189 ++++++++++++++++++++++++++++
 MdeModulePkg/MdeModulePkg.dec       |   3 +
 2 files changed, 192 insertions(+)
 create mode 100644 MdeModulePkg/Include/Ppi/Variable.h

diff --git a/MdeModulePkg/Include/Ppi/Variable.h b/MdeModulePkg/Include/Ppi/Variable.h
new file mode 100644
index 0000000000..97dc7ceefa
--- /dev/null
+++ b/MdeModulePkg/Include/Ppi/Variable.h
@@ -0,0 +1,189 @@
+/** @file
+  EDKII PEI Variable Protocol provides an implementation of variables
+  intended for use as a means to store data in the PEI environment.
+
+  Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __PEI_VARIABLE_PPI_H_
+#define __PEI_VARIABLE_PPI_H_
+
+#define EDKII_PEI_VARIABLE_PPI_GUID \
+  { \
+    0xe7b2cd04, 0x4b14, 0x44c2, { 0xb7, 0x48, 0xce, 0xaf, 0x2b, 0x66, 0x4a, 0xb0 } \
+  }
+
+typedef struct _EDKII_PEI_VARIABLE_PPI EDKII_PEI_VARIABLE_PPI;
+
+/**
+  This service retrieves a variable's value using its name and GUID.
+
+  Read the specified variable from the UEFI variable store. If the Data
+  buffer is too small to hold the contents of the variable,
+  the error EFI_BUFFER_TOO_SMALL is returned and DataSize is set to the
+  required buffer size to obtain the data.
+
+  @param[in]        This              A pointer to this instance of the EDKII_PEI_VARIABLE_PPI.
+  @param[in]        VariableName      A pointer to a null-terminated string that is the variable's name.
+  @param[in]        VariableGuid      A pointer to an EFI_GUID that is the variable's GUID. The combination of
+                                      VariableGuid and VariableName must be unique.
+  @param[out]       Attributes        If non-NULL, on return, points to the variable's attributes.
+  @param[in, out]   DataSize          On entry, points to the size in bytes of the Data buffer.
+                                      On return, points to the size of the data returned in Data.
+  @param[out]       Data              Points to the buffer which will hold the returned variable value.
+                                      May be NULL with a zero DataSize in order to determine the size of the
+                                      buffer needed.
+
+  @retval EFI_SUCCESS                 The variable was read successfully.
+  @retval EFI_NOT_FOUND               The variable was not found.
+  @retval EFI_BUFFER_TOO_SMALL        The DataSize is too small for the resulting data.
+                                      DataSize is updated with the size required for
+                                      the specified variable.
+  @retval EFI_INVALID_PARAMETER       VariableName, VariableGuid, DataSize or Data is NULL.
+  @retval EFI_DEVICE_ERROR            The variable could not be retrieved because of a device error.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_GET_VARIABLE)(
+  IN CONST  EDKII_PEI_VARIABLE_PPI    *This,
+  IN CONST  CHAR16                    *VariableName,
+  IN CONST  EFI_GUID                  *VariableGuid,
+  OUT       UINT32                    *Attributes,
+  IN OUT    UINTN                     *DataSize,
+  OUT       VOID                      *Data OPTIONAL
+  );
+
+/**
+  Return the next variable name and GUID.
+
+  This function is called multiple times to retrieve the VariableName
+  and VariableGuid of all variables currently available in the system.
+  On each call, the previous results are passed into the interface,
+  and, on return, the interface returns the data for the next
+  interface. When the entire variable list has been returned,
+  EFI_NOT_FOUND is returned.
+
+  @param[in]        This              A pointer to this instance of the EDKII_PEI_VARIABLE_PPI.
+  @param[in, out]   VariableNameSize  On entry, points to the size of the buffer pointed to by VariableName.
+                                      On return, the size of the variable name buffer.
+  @param[in, out]   VariableName      On entry, a pointer to a null-terminated string that is the variable's name.
+                                      On return, points to the next variable's null-terminated name string.
+  @param[in, out]   VariableGuid      On entry, a pointer to an EFI_GUID that is the variable's GUID.
+                                      On return, a pointer to the next variable's GUID.
+
+  @retval EFI_SUCCESS                 The variable was read successfully.
+  @retval EFI_NOT_FOUND               The variable could not be found.
+  @retval EFI_BUFFER_TOO_SMALL        The VariableNameSize is too small for the resulting
+                                      data. VariableNameSize is updated with the size
+                                      required for the specified variable.
+  @retval EFI_INVALID_PARAMETER       VariableName, VariableGuid or
+                                      VariableNameSize is NULL.
+  @retval EFI_DEVICE_ERROR            The variable could not be retrieved because of a device error.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_GET_NEXT_VARIABLE_NAME)(
+  IN CONST  EDKII_PEI_VARIABLE_PPI    *This,
+  IN OUT    UINTN                     *VariableNameSize,
+  IN OUT    CHAR16                    *VariableName,
+  IN OUT    EFI_GUID                  *VariableGuid
+  );
+
+/**
+  Sets the value of a variable.
+
+  @param[in]        This              A pointer to this instance of the EDKII_PEI_VARIABLE_PPI.
+  @param[in]        VariableName      A Null-terminated string that is the name of the vendor's variable.
+                                      Each VariableName is unique for each VendorGuid. VariableName must
+                                      contain 1 or more characters. If VariableName is an empty string,
+                                      then EFI_INVALID_PARAMETER is returned.
+  @param[in]        VendorGuid        A unique identifier for the vendor.
+  @param[in]        Attributes        Attributes bitmask to set for the variable.
+  @param[in]        DataSize          The size in bytes of the Data buffer. Unless the EFI_VARIABLE_APPEND_WRITE
+                                      attribute is set, a size of zero causes the variable to be deleted. When the
+                                      EFI_VARIABLE_APPEND_WRITE attribute is set, then a SetVariable() call with a
+                                      DataSize of zero will not cause any change to the variable value.
+  @param[in]        Data              The contents for the variable.
+
+  @retval EFI_SUCCESS                 The firmware has successfully stored the variable and its data as
+                                      defined by the Attributes.
+  @retval EFI_INVALID_PARAMETER       An invalid combination of attribute bits, name, and GUID was supplied, or the
+                                      DataSize exceeds the maximum allowed.
+  @retval EFI_INVALID_PARAMETER       VariableName is an empty string.
+  @retval EFI_OUT_OF_RESOURCES        Not enough storage is available to hold the variable and its data.
+  @retval EFI_DEVICE_ERROR            The variable could not be retrieved due to a hardware error.
+  @retval EFI_WRITE_PROTECTED         The variable in question is read-only.
+  @retval EFI_WRITE_PROTECTED         The variable in question cannot be deleted.
+  @retval EFI_SECURITY_VIOLATION      The variable could not be written due to EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS,
+                                      or EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS, or
+                                      EFI_VARIABLE_ENHANCED_AUTHENTICATED_ACCESS being set. Writing to authenticated
+                                      variables is not supported in the PEI environment. Updates to authenticated
+                                      variables can be requested during PEI via the EFI_AUTHENTICATED_VARIABLE_HOB, but
+                                      these updates won't be written to non-volatile storage until later in DXE. See
+                                      MdeModulePkg/Include/Guid/VariableFormat.h for more details on
+                                      EFI_AUTHENTICATED_VARIABLE_HOB.
+  @retval EFI_NOT_FOUND               The variable trying to be updated or deleted was not found.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_SET_VARIABLE)(
+  IN CONST  EDKII_PEI_VARIABLE_PPI    *This,
+  IN        CHAR16                    *VariableName,
+  IN        EFI_GUID                  *VendorGuid,
+  IN        UINT32                    Attributes,
+  IN        UINTN                     DataSize,
+  IN        VOID                      *Data
+  );
+
+/**
+  Returns information about the UEFI variables.
+
+  @param[in]        This                          A pointer to this instance of the EDKII_PEI_VARIABLE_PPI.
+  @param[in]        Attributes                    Attributes bitmask to specify the type of variables on
+                                                  which to return information.
+  @param[out]       MaximumVariableStorageSize    On output the maximum size of the storage space
+                                                  available for the EFI variables associated with the
+                                                  attributes specified.
+  @param[out]       RemainingVariableStorageSize  Returns the remaining size of the storage space
+                                                  available for the EFI variables associated with the
+                                                  attributes specified.
+  @param[out]       MaximumVariableSize           Returns the maximum size of the individual EFI
+                                                  variables associated with the attributes specified.
+
+  @retval EFI_SUCCESS                             Valid answer returned.
+  @retval EFI_INVALID_PARAMETER                   An invalid combination of attribute bits was supplied
+  @retval EFI_UNSUPPORTED                         The attribute is not supported on this platform, and the
+                                                  MaximumVariableStorageSize,
+                                                  RemainingVariableStorageSize, MaximumVariableSize
+                                                  are undefined.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_QUERY_VARIABLE_INFO)(
+  IN CONST  EDKII_PEI_VARIABLE_PPI    *This,
+  IN        UINT32                    Attributes,
+  OUT       UINT64                    *MaximumVariableStorageSize,
+  OUT       UINT64                    *RemainingVariableStorageSize,
+  OUT       UINT64                    *MaximumVariableSize
+  );
+
+///
+/// PEI Variable Protocol is intended for use as a means
+/// to store data in the PEI environment.
+///
+struct _EDKII_PEI_VARIABLE_PPI {
+  EDKII_PEI_GET_VARIABLE            GetVariable;
+  EDKII_PEI_GET_NEXT_VARIABLE_NAME  GetNextVariableName;
+  EDKII_PEI_SET_VARIABLE            SetVariable;
+  EDKII_PEI_QUERY_VARIABLE_INFO     QueryVariableInfo;
+};
+
+extern EFI_GUID  gEdkiiPeiVariablePpiGuid;
+
+#endif
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 2bcb9f9453..4f4c48b81f 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -513,6 +513,9 @@
   gEdkiiPeiCapsuleOnDiskPpiGuid             = { 0x71a9ea61, 0x5a35, 0x4a5d, { 0xac, 0xef, 0x9c, 0xf8, 0x6d, 0x6d, 0x67, 0xe0 } }
   gEdkiiPeiBootInCapsuleOnDiskModePpiGuid   = { 0xb08a11e4, 0xe2b7, 0x4b75, { 0xb5, 0x15, 0xaf, 0x61, 0x6, 0x68, 0xbf, 0xd1  } }
 
+  ## Include/Ppi/Variable.h
+  gEdkiiPeiVariablePpiGuid                  = { 0xe7b2cd04, 0x4b14, 0x44c2, { 0xb7, 0x48, 0xce, 0xaf, 0x2b, 0x66, 0x4a, 0xb0 } }
+
 [Protocols]
   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
   #  Include/Protocol/LoadPe32Image.h
-- 
2.27.0.windows.1