From: "Lin, Jason1" <jason1.lin@intel.com>
To: devel@edk2.groups.io
Cc: Jason1 Lin <jason1.lin@intel.com>,
Bob Feng <bob.c.feng@intel.com>,
Liming Gao <gaoliming@byosoft.com.cn>,
Yuwei Chen <yuwei.chen@intel.com>,
Isaac W Oram <isaac.w.oram@intel.com>,
Rangasai V Chaganty <rangasai.v.chaganty@intel.com>,
Dakota Chiang <dakota.chiang@intel.com>
Subject: [PATCH v3 2/3] [edk2-platforms] Silicon/Intel/FitGen: Reduce the typecasting and pointer usage
Date: Fri, 1 Jul 2022 23:10:04 +0800 [thread overview]
Message-ID: <20220701151005.189-2-jason1.lin@intel.com> (raw)
In-Reply-To: <20220701151005.189-1-jason1.lin@intel.com>
From: Jason1 Lin <jason1.lin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3958
FitGen tool exists lots of typecasting and pointer usage.
This code change is used to reduce these in FillFitTable ()
and GetFitEntryInfo ().
To make code more clearly and easy to read.
Signed-off-by: Jason1 Lin <jason1.lin@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Isaac W Oram <isaac.w.oram@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Dakota Chiang <dakota.chiang@intel.com>
---
Silicon/Intel/Tools/FitGen/FitGen.c | 125 ++++++++++++--------
1 file changed, 78 insertions(+), 47 deletions(-)
diff --git a/Silicon/Intel/Tools/FitGen/FitGen.c b/Silicon/Intel/Tools/FitGen/FitGen.c
index eac8fa8715..01b4f82518 100644
--- a/Silicon/Intel/Tools/FitGen/FitGen.c
+++ b/Silicon/Intel/Tools/FitGen/FitGen.c
@@ -2768,6 +2768,7 @@ Returns:
{
FIRMWARE_INTERFACE_TABLE_ENTRY *FitEntry;
UINT32 FitIndex;
+ UINT32 FitEntrySizeValue;
UINT32 Index;
UINT8 Checksum;
UINTN SubIndex;
@@ -2788,27 +2789,35 @@ Returns:
//
// 2. FitHeader
//
- FitEntry[FitIndex].Address = *(UINT64 *)"_FIT_ ";
- *(UINT32 *)&FitEntry[FitIndex].Size[0] = gFitTableContext.FitEntryNumber;
- FitEntry[FitIndex].Version = (UINT16)gFitTableContext.FitHeaderVersion;
- FitEntry[FitIndex].Type = FIT_TABLE_TYPE_HEADER;
- FitEntry[FitIndex].C_V = 1;
+ FitEntrySizeValue = gFitTableContext.FitEntryNumber;
+ FitEntry[FitIndex].Address = *(UINT64 *)"_FIT_ ";
+ FitEntry[FitIndex].Size[0] = (UINT8)FitEntrySizeValue;
+ FitEntry[FitIndex].Size[1] = (UINT8)(FitEntrySizeValue >> 8);
+ FitEntry[FitIndex].Size[2] = (UINT8)(FitEntrySizeValue >> 16);
+ FitEntry[FitIndex].Rsvd = 0;
+ FitEntry[FitIndex].Version = (UINT16)gFitTableContext.FitHeaderVersion;
+ FitEntry[FitIndex].Type = FIT_TABLE_TYPE_HEADER;
+ FitEntry[FitIndex].C_V = 1;
//
// Checksum will be updated later...
//
- FitEntry[FitIndex].Checksum = 0;
+ FitEntry[FitIndex].Checksum = 0;
//
// 3. Microcode
//
FitIndex++;
for (Index = 0; Index < gFitTableContext.MicrocodeNumber; Index++) {
- FitEntry[FitIndex].Address = gFitTableContext.Microcode[Index].Address;
- *(UINT32 *)&FitEntry[FitIndex].Size[0] = 0; //gFitTableContext.Microcode[Index].Size / 16;
- FitEntry[FitIndex].Version = (UINT16)gFitTableContext.MicrocodeVersion;
- FitEntry[FitIndex].Type = FIT_TABLE_TYPE_MICROCODE;
- FitEntry[FitIndex].C_V = 0;
- FitEntry[FitIndex].Checksum = 0;
+ FitEntrySizeValue = 0; // gFitTableContext.Microcode[Index].Size / 16
+ FitEntry[FitIndex].Address = gFitTableContext.Microcode[Index].Address;
+ FitEntry[FitIndex].Size[0] = (UINT8)FitEntrySizeValue;
+ FitEntry[FitIndex].Size[1] = (UINT8)(FitEntrySizeValue >> 8);
+ FitEntry[FitIndex].Size[2] = (UINT8)(FitEntrySizeValue >> 16);
+ FitEntry[FitIndex].Rsvd = 0;
+ FitEntry[FitIndex].Version = (UINT16)gFitTableContext.MicrocodeVersion;
+ FitEntry[FitIndex].Type = FIT_TABLE_TYPE_MICROCODE;
+ FitEntry[FitIndex].C_V = 0;
+ FitEntry[FitIndex].Checksum = 0;
FitIndex++;
}
@@ -2816,12 +2825,16 @@ Returns:
// 4. StartupAcm
//
for (Index = 0; Index < gFitTableContext.StartupAcmNumber; Index++) {
- FitEntry[FitIndex].Address = gFitTableContext.StartupAcm[Index].Address;
- *(UINT32 *)&FitEntry[FitIndex].Size[0] = 0; //gFitTableContext.StartupAcm.Size / 16;
- FitEntry[FitIndex].Version = (UINT16)gFitTableContext.StartupAcmVersion;
- FitEntry[FitIndex].Type = FIT_TABLE_TYPE_STARTUP_ACM;
- FitEntry[FitIndex].C_V = 0;
- FitEntry[FitIndex].Checksum = 0;
+ FitEntrySizeValue = 0; // gFitTableContext.StartupAcm.Size / 16
+ FitEntry[FitIndex].Address = gFitTableContext.StartupAcm[Index].Address;
+ FitEntry[FitIndex].Size[0] = (UINT8)FitEntrySizeValue;
+ FitEntry[FitIndex].Size[1] = (UINT8)(FitEntrySizeValue >> 8);
+ FitEntry[FitIndex].Size[2] = (UINT8)(FitEntrySizeValue >> 16);
+ FitEntry[FitIndex].Rsvd = 0;
+ FitEntry[FitIndex].Version = (UINT16)gFitTableContext.StartupAcmVersion;
+ FitEntry[FitIndex].Type = FIT_TABLE_TYPE_STARTUP_ACM;
+ FitEntry[FitIndex].C_V = 0;
+ FitEntry[FitIndex].Checksum = 0;
FitIndex++;
}
@@ -2829,19 +2842,23 @@ Returns:
// 4.5. DiagnosticAcm
//
if (gFitTableContext.DiagnstAcm.Address != 0) {
- FitEntry[FitIndex].Address = gFitTableContext.DiagnstAcm.Address;
- *(UINT32 *)&FitEntry[FitIndex].Size[0] = 0;
- FitEntry[FitIndex].Version = (UINT16)gFitTableContext.DiagnstAcmVersion;
- FitEntry[FitIndex].Type = FIT_TABLE_TYPE_DIAGNST_ACM;
- FitEntry[FitIndex].C_V = 0;
- FitEntry[FitIndex].Checksum = 0;
+ FitEntrySizeValue = 0; // gFitTableContext.DiagnstAcmVersion.Size / 16
+ FitEntry[FitIndex].Address = gFitTableContext.DiagnstAcm.Address;
+ FitEntry[FitIndex].Size[0] = (UINT8)FitEntrySizeValue;
+ FitEntry[FitIndex].Size[1] = (UINT8)(FitEntrySizeValue >> 8);
+ FitEntry[FitIndex].Size[2] = (UINT8)(FitEntrySizeValue >> 16);
+ FitEntry[FitIndex].Rsvd = 0;
+ FitEntry[FitIndex].Version = (UINT16)gFitTableContext.DiagnstAcmVersion;
+ FitEntry[FitIndex].Type = FIT_TABLE_TYPE_DIAGNST_ACM;
+ FitEntry[FitIndex].C_V = 0;
+ FitEntry[FitIndex].Checksum = 0;
FitIndex++;
}
//
// 5. BiosModule
//
//
- // BiosModule segments order needs to be put from low addresss to high for Btg requirement
+ // BiosModule segments order needs to be put from low address to high for Btg requirement
//
if (gFitTableContext.BiosModuleNumber > 1) {
for (Index = 0; Index < (UINTN)gFitTableContext.BiosModuleNumber - 1; Index++){
@@ -2855,12 +2872,16 @@ Returns:
}
}
for (Index = 0; Index < gFitTableContext.BiosModuleNumber; Index++) {
- FitEntry[FitIndex].Address = gFitTableContext.BiosModule[Index].Address;
- *(UINT32 *)&FitEntry[FitIndex].Size[0] = gFitTableContext.BiosModule[Index].Size / 16;
- FitEntry[FitIndex].Version = (UINT16)gFitTableContext.BiosModuleVersion;
- FitEntry[FitIndex].Type = FIT_TABLE_TYPE_BIOS_MODULE;
- FitEntry[FitIndex].C_V = 0;
- FitEntry[FitIndex].Checksum = 0;
+ FitEntrySizeValue = gFitTableContext.BiosModule[Index].Size / 16;
+ FitEntry[FitIndex].Address = gFitTableContext.BiosModule[Index].Address;
+ FitEntry[FitIndex].Size[0] = (UINT8)FitEntrySizeValue;
+ FitEntry[FitIndex].Size[1] = (UINT8)(FitEntrySizeValue >> 8);
+ FitEntry[FitIndex].Size[2] = (UINT8)(FitEntrySizeValue >> 16);
+ FitEntry[FitIndex].Rsvd = 0;
+ FitEntry[FitIndex].Version = (UINT16)gFitTableContext.BiosModuleVersion;
+ FitEntry[FitIndex].Type = FIT_TABLE_TYPE_BIOS_MODULE;
+ FitEntry[FitIndex].C_V = 0;
+ FitEntry[FitIndex].Checksum = 0;
FitIndex++;
}
@@ -2868,15 +2889,18 @@ Returns:
// 6. Optional module
//
for (Index = 0; Index < gFitTableContext.OptionalModuleNumber; Index++) {
- FitEntry[FitIndex].Address = gFitTableContext.OptionalModule[Index].Address;
- *(UINT32 *)&FitEntry[FitIndex].Size[0] = gFitTableContext.OptionalModule[Index].Size;
- FitEntry[FitIndex].Version = (UINT16)gFitTableContext.OptionalModule[Index].Version;
- FitEntry[FitIndex].Type = (UINT8)gFitTableContext.OptionalModule[Index].Type;
+ FitEntrySizeValue = gFitTableContext.OptionalModule[Index].Size;
+ FitEntry[FitIndex].Address = gFitTableContext.OptionalModule[Index].Address;
+ FitEntry[FitIndex].Size[0] = (UINT8)FitEntrySizeValue;
+ FitEntry[FitIndex].Size[1] = (UINT8)(FitEntrySizeValue >> 8);
+ FitEntry[FitIndex].Size[2] = (UINT8)(FitEntrySizeValue >> 16);
+ FitEntry[FitIndex].Version = (UINT16)gFitTableContext.OptionalModule[Index].Version;
+ FitEntry[FitIndex].Type = (UINT8)gFitTableContext.OptionalModule[Index].Type;
if (FitEntry[FitIndex].Type == FIT_TABLE_TYPE_CSE_SECURE_BOOT) {
- FitEntry[FitIndex].Rsvd = (UINT8)gFitTableContext.OptionalModule[Index].SubType;
+ FitEntry[FitIndex].Rsvd = (UINT8)gFitTableContext.OptionalModule[Index].SubType;
}
- FitEntry[FitIndex].C_V = 0;
- FitEntry[FitIndex].Checksum = 0;
+ FitEntry[FitIndex].C_V = 0;
+ FitEntry[FitIndex].Checksum = 0;
FitIndex++;
}
@@ -2884,12 +2908,16 @@ Returns:
// 7. Port module
//
for (Index = 0; Index < gFitTableContext.PortModuleNumber; Index++) {
- FitEntry[FitIndex].Address = gFitTableContext.PortModule[Index].Address + ((UINT64)gFitTableContext.PortModule[Index].Size << 32);
- *(UINT32 *)&FitEntry[FitIndex].Size[0] = 0;
- FitEntry[FitIndex].Version = (UINT16)gFitTableContext.PortModule[Index].Version;
- FitEntry[FitIndex].Type = (UINT8)gFitTableContext.PortModule[Index].Type;
- FitEntry[FitIndex].C_V = 0;
- FitEntry[FitIndex].Checksum = 0;
+ FitEntrySizeValue = 0;
+ FitEntry[FitIndex].Address = gFitTableContext.PortModule[Index].Address + ((UINT64)gFitTableContext.PortModule[Index].Size << 32);
+ FitEntry[FitIndex].Size[0] = (UINT8)FitEntrySizeValue;
+ FitEntry[FitIndex].Size[1] = (UINT8)(FitEntrySizeValue >> 8);
+ FitEntry[FitIndex].Size[2] = (UINT8)(FitEntrySizeValue >> 16);
+ FitEntry[FitIndex].Rsvd = 0;
+ FitEntry[FitIndex].Version = (UINT16)gFitTableContext.PortModule[Index].Version;
+ FitEntry[FitIndex].Type = (UINT8)gFitTableContext.PortModule[Index].Type;
+ FitEntry[FitIndex].C_V = 0;
+ FitEntry[FitIndex].Checksum = 0;
FitIndex++;
}
@@ -3130,6 +3158,7 @@ Returns:
--*/
{
FIRMWARE_INTERFACE_TABLE_ENTRY *FitEntry;
+ UINT32 FitEntrySizeValue;
UINT32 FitIndex;
UINT32 FitTableOffset;
@@ -3155,7 +3184,8 @@ Returns:
if (FitEntry[FitIndex].Type != FIT_TABLE_TYPE_HEADER) {
return 0;
}
- gFitTableContext.FitEntryNumber = *(UINT32 *)&FitEntry[FitIndex].Size[0];
+ FitEntrySizeValue = (((UINT32)FitEntry[FitIndex].Size[2]) << 16) + (((UINT32)FitEntry[FitIndex].Size[1]) << 8) + ((UINT32)FitEntry[FitIndex].Size[0]);
+ gFitTableContext.FitEntryNumber = FitEntrySizeValue;
gFitTableContext.FitHeaderVersion = FitEntry[FitIndex].Version;
//
@@ -3163,6 +3193,7 @@ Returns:
//
FitIndex++;
for (; FitIndex < gFitTableContext.FitEntryNumber; FitIndex++) {
+ FitEntrySizeValue = (((UINT32)FitEntry[FitIndex].Size[2]) << 16) + (((UINT32)FitEntry[FitIndex].Size[1]) << 8) + ((UINT32)FitEntry[FitIndex].Size[0]);
switch (FitEntry[FitIndex].Type) {
case FIT_TABLE_TYPE_MICROCODE:
gFitTableContext.Microcode[gFitTableContext.MicrocodeNumber].Address = (UINT32)FitEntry[FitIndex].Address;
@@ -3175,7 +3206,7 @@ Returns:
break;
case FIT_TABLE_TYPE_BIOS_MODULE:
gFitTableContext.BiosModule[gFitTableContext.BiosModuleNumber].Address = (UINT32)FitEntry[FitIndex].Address;
- gFitTableContext.BiosModule[gFitTableContext.BiosModuleNumber].Size = *(UINT32 *)&FitEntry[FitIndex].Size[0] * 16;
+ gFitTableContext.BiosModule[gFitTableContext.BiosModuleNumber].Size = FitEntrySizeValue * 16;
gFitTableContext.BiosModuleVersion = FitEntry[FitIndex].Version;
gFitTableContext.BiosModuleNumber ++;
break;
@@ -3192,7 +3223,7 @@ Returns:
// Not Port Configure, pass through
default: // Others
gFitTableContext.OptionalModule[gFitTableContext.OptionalModuleNumber].Address = (UINT32)FitEntry[FitIndex].Address;
- gFitTableContext.OptionalModule[gFitTableContext.OptionalModuleNumber].Size = *(UINT32 *)&FitEntry[FitIndex].Size[0];
+ gFitTableContext.OptionalModule[gFitTableContext.OptionalModuleNumber].Size = FitEntrySizeValue;
gFitTableContext.OptionalModule[gFitTableContext.OptionalModuleNumber].Version = FitEntry[FitIndex].Version;
gFitTableContext.OptionalModule[gFitTableContext.OptionalModuleNumber].Type = FitEntry[FitIndex].Type;
gFitTableContext.OptionalModuleNumber ++;
--
2.37.0.windows.1
next prev parent reply other threads:[~2022-07-01 15:10 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-01 15:10 [PATCH v3 1/3] [edk2-platforms] Silicon/Intel/FitGen: Support multiple Startup ACM Type 2 entries in FitGen tool Lin, Jason1
2022-07-01 15:10 ` Lin, Jason1 [this message]
2022-07-01 18:34 ` [PATCH v3 2/3] [edk2-platforms] Silicon/Intel/FitGen: Reduce the typecasting and pointer usage Oram, Isaac W
2022-07-04 1:37 ` Yuwei Chen
2022-07-01 15:10 ` [PATCH v3 3/3] [edk2-platforms] Silicon/Intel/FitGen: Support Startup ACM entries (Type 2) 0x200 Version Lin, Jason1
2022-07-01 18:34 ` Oram, Isaac W
2022-07-04 1:37 ` Yuwei Chen
2022-07-01 18:34 ` [PATCH v3 1/3] [edk2-platforms] Silicon/Intel/FitGen: Support multiple Startup ACM Type 2 entries in FitGen tool Oram, Isaac W
2022-07-04 1:35 ` [edk2-devel] " Yuwei Chen
2022-07-05 13:06 ` Bob Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220701151005.189-2-jason1.lin@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox