* [PATCH v2 34/34] BaseTools: Add LoongArch64 binding.
@ 2022-09-14 9:42 Chao Li
2022-09-15 6:34 ` 回复: [edk2-devel] " gaoliming
0 siblings, 1 reply; 3+ messages in thread
From: Chao Li @ 2022-09-14 9:42 UTC (permalink / raw)
To: devel; +Cc: Bob Feng, Liming Gao, Yuwei Chen, Baoqi Zhang
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4053
Add LoongArch64 ProcessorBin.h and add LoongArch to Makefiles.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
---
BaseTools/Source/C/GNUmakefile | 3 +
.../C/Include/LoongArch64/ProcessorBind.h | 80 +++++++++++++++++++
2 files changed, 83 insertions(+)
create mode 100644 BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h
diff --git a/BaseTools/Source/C/GNUmakefile b/BaseTools/Source/C/GNUmakefile
index 8c191e0c38..5275f657ef 100644
--- a/BaseTools/Source/C/GNUmakefile
+++ b/BaseTools/Source/C/GNUmakefile
@@ -29,6 +29,9 @@ ifndef HOST_ARCH
ifneq (,$(findstring riscv64,$(uname_m)))
HOST_ARCH=RISCV64
endif
+ ifneq (,$(findstring loongarch64,$(uname_m)))
+ HOST_ARCH=LOONGARCH64
+ endif
ifndef HOST_ARCH
$(info Could not detected HOST_ARCH from uname results)
$(error HOST_ARCH is not defined!)
diff --git a/BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h b/BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h
new file mode 100644
index 0000000000..0267859dee
--- /dev/null
+++ b/BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h
@@ -0,0 +1,80 @@
+/** @file
+ Processor or Compiler specific defines and types for LoongArch
+
+ Copyright (c) 2022, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+#ifndef PROCESSOR_BIND_H_
+#define PROCESSOR_BIND_H_
+
+//
+// Define the processor type so other code can make processor based choices
+//
+#define MDE_CPU_LOONGARCH64
+
+#define EFIAPI
+
+//
+// Make sure we are using the correct packing rules per EFI specification
+//
+#ifndef __GNUC__
+#pragma pack()
+#endif
+
+//
+// Use ANSI C 2000 stdint.h integer width declarations
+//
+#include <stdint.h>
+typedef uint8_t BOOLEAN;
+typedef int8_t INT8;
+typedef uint8_t UINT8;
+typedef int16_t INT16;
+typedef uint16_t UINT16;
+typedef int32_t INT32;
+typedef uint32_t UINT32;
+typedef int64_t INT64;
+typedef uint64_t UINT64;
+typedef char CHAR8;
+typedef uint16_t CHAR16;
+
+//
+// Unsigned value of native width. (4 bytes on supported 32-bit processor instructions,
+// 8 bytes on supported 64-bit processor instructions)
+//
+typedef UINT64 UINTN;
+
+//
+// Signed value of native width. (4 bytes on supported 32-bit processor instructions,
+// 8 bytes on supported 64-bit processor instructions)
+//
+typedef INT64 INTN;
+
+//
+// Processor specific defines
+//
+
+//
+// A value of native width with the highest bit set.
+//
+#define MAX_BIT 0x8000000000000000ULL
+//
+// A value of native width with the two highest bits set.
+//
+#define MAX_2_BITS 0xC000000000000000ULL
+
+#if defined (__GNUC__)
+//
+// For GNU assembly code, .global or .globl can declare global symbols.
+// Define this macro to unify the usage.
+//
+#define ASM_GLOBAL .globl
+#endif
+
+//
+// The stack alignment required for LoongArch
+//
+#define CPU_STACK_ALIGNMENT 16
+
+#endif
--
2.27.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* 回复: [edk2-devel] [PATCH v2 34/34] BaseTools: Add LoongArch64 binding.
2022-09-14 9:42 [PATCH v2 34/34] BaseTools: Add LoongArch64 binding Chao Li
@ 2022-09-15 6:34 ` gaoliming
2022-09-15 7:45 ` 回复: edk2-devel] " Chao Li
0 siblings, 1 reply; 3+ messages in thread
From: gaoliming @ 2022-09-15 6:34 UTC (permalink / raw)
To: devel, lichao
Cc: 'Bob Feng', 'Yuwei Chen', 'Baoqi Zhang'
Chao:
This change should be placed together with other changes in BaseTools. I
mean their commits can be placed together.
The code change is good to me. Reviewed-by: Liming Gao <gaoliming@byosoft.
com.cn>
Thanks
Liming
> -----邮件原件-----
> 发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 Chao Li
> 发送时间: 2022年9月14日 17:43
> 收件人: devel@edk2.groups.io
> 抄送: Bob Feng <bob.c.feng@intel.com>; Liming Gao
> <gaoliming@byosoft.com.cn>; Yuwei Chen <yuwei.chen@intel.com>; Baoqi
> Zhang <zhangbaoqi@loongson.cn>
> 主题: [edk2-devel] [PATCH v2 34/34] BaseTools: Add LoongArch64 binding.
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4053
>
> Add LoongArch64 ProcessorBin.h and add LoongArch to Makefiles.
>
> Cc: Bob Feng <bob.c.feng@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Yuwei Chen <yuwei.chen@intel.com>
>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
> ---
> BaseTools/Source/C/GNUmakefile | 3 +
> .../C/Include/LoongArch64/ProcessorBind.h | 80
> +++++++++++++++++++
> 2 files changed, 83 insertions(+)
> create mode 100644
> BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h
>
> diff --git a/BaseTools/Source/C/GNUmakefile
> b/BaseTools/Source/C/GNUmakefile
> index 8c191e0c38..5275f657ef 100644
> --- a/BaseTools/Source/C/GNUmakefile
> +++ b/BaseTools/Source/C/GNUmakefile
> @@ -29,6 +29,9 @@ ifndef HOST_ARCH
> ifneq (,$(findstring riscv64,$(uname_m)))
>
> HOST_ARCH=RISCV64
>
> endif
>
> + ifneq (,$(findstring loongarch64,$(uname_m)))
>
> + HOST_ARCH=LOONGARCH64
>
> + endif
>
> ifndef HOST_ARCH
>
> $(info Could not detected HOST_ARCH from uname results)
>
> $(error HOST_ARCH is not defined!)
>
> diff --git a/BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h
> b/BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h
> new file mode 100644
> index 0000000000..0267859dee
> --- /dev/null
> +++ b/BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h
> @@ -0,0 +1,80 @@
> +/** @file
>
> + Processor or Compiler specific defines and types for LoongArch
>
> +
>
> + Copyright (c) 2022, Loongson Technology Corporation Limited. All rights
> reserved.<BR>
>
> +
>
> + SPDX-License-Identifier: BSD-2-Clause-Patent
>
> +
>
> +**/
>
> +#ifndef PROCESSOR_BIND_H_
>
> +#define PROCESSOR_BIND_H_
>
> +
>
> +//
>
> +// Define the processor type so other code can make processor based
> choices
>
> +//
>
> +#define MDE_CPU_LOONGARCH64
>
> +
>
> +#define EFIAPI
>
> +
>
> +//
>
> +// Make sure we are using the correct packing rules per EFI specification
>
> +//
>
> +#ifndef __GNUC__
>
> +#pragma pack()
>
> +#endif
>
> +
>
> +//
>
> +// Use ANSI C 2000 stdint.h integer width declarations
>
> +//
>
> +#include <stdint.h>
>
> +typedef uint8_t BOOLEAN;
>
> +typedef int8_t INT8;
>
> +typedef uint8_t UINT8;
>
> +typedef int16_t INT16;
>
> +typedef uint16_t UINT16;
>
> +typedef int32_t INT32;
>
> +typedef uint32_t UINT32;
>
> +typedef int64_t INT64;
>
> +typedef uint64_t UINT64;
>
> +typedef char CHAR8;
>
> +typedef uint16_t CHAR16;
>
> +
>
> +//
>
> +// Unsigned value of native width. (4 bytes on supported 32-bit
processor
> instructions,
>
> +// 8 bytes on supported 64-bit processor instructions)
>
> +//
>
> +typedef UINT64 UINTN;
>
> +
>
> +//
>
> +// Signed value of native width. (4 bytes on supported 32-bit processor
> instructions,
>
> +// 8 bytes on supported 64-bit processor instructions)
>
> +//
>
> +typedef INT64 INTN;
>
> +
>
> +//
>
> +// Processor specific defines
>
> +//
>
> +
>
> +//
>
> +// A value of native width with the highest bit set.
>
> +//
>
> +#define MAX_BIT 0x8000000000000000ULL
>
> +//
>
> +// A value of native width with the two highest bits set.
>
> +//
>
> +#define MAX_2_BITS 0xC000000000000000ULL
>
> +
>
> +#if defined (__GNUC__)
>
> +//
>
> +// For GNU assembly code, .global or .globl can declare global symbols.
>
> +// Define this macro to unify the usage.
>
> +//
>
> +#define ASM_GLOBAL .globl
>
> +#endif
>
> +
>
> +//
>
> +// The stack alignment required for LoongArch
>
> +//
>
> +#define CPU_STACK_ALIGNMENT 16
>
> +
>
> +#endif
>
> --
> 2.27.0
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#93776): https://edk2.groups.io/g/devel/message/93776
> Mute This Topic: https://groups.io/mt/93674251/4905953
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub
> [gaoliming@byosoft.com.cn]
> -=-=-=-=-=-=
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: 回复: edk2-devel] [PATCH v2 34/34] BaseTools: Add LoongArch64 binding.
2022-09-15 6:34 ` 回复: [edk2-devel] " gaoliming
@ 2022-09-15 7:45 ` Chao Li
0 siblings, 0 replies; 3+ messages in thread
From: Chao Li @ 2022-09-15 7:45 UTC (permalink / raw)
To: "gaoliming"
Cc: devel@edk2.groups.io, "'Bob Feng'",
"'Yuwei Chen'", "'Baoqi Zhang'"
[-- Attachment #1: Type: text/plain, Size: 5442 bytes --]
Liming,
Ok, in V3, I will put this patch together with BaseTools changes.
Thanks,
Chao
--------
On 9月 15 2022, at 2:34 下午, "gaoliming" <gaoliming@byosoft.com.cn> wrote:
> Chao:
> This change should be placed together with other changes in BaseTools. I
> mean their commits can be placed together.
>
> The code change is good to me. Reviewed-by: Liming Gao <gaoliming@byosoft.
> com.cn>
>
> Thanks
> Liming
> > -----邮件原件-----
> > 发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 Chao Li
> > 发送时间: 2022年9月14日 17:43
> > 收件人: devel@edk2.groups.io
> > 抄送: Bob Feng <bob.c.feng@intel.com>; Liming Gao
> > <gaoliming@byosoft.com.cn>; Yuwei Chen <yuwei.chen@intel.com>; Baoqi
> > Zhang <zhangbaoqi@loongson.cn>
> > 主题: [edk2-devel] [PATCH v2 34/34] BaseTools: Add LoongArch64 binding.
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4053
> >
> > Add LoongArch64 ProcessorBin.h and add LoongArch to Makefiles.
> >
> > Cc: Bob Feng <bob.c.feng@intel.com>
> > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > Cc: Yuwei Chen <yuwei.chen@intel.com>
> >
> > Signed-off-by: Chao Li <lichao@loongson.cn>
> > Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
> > ---
> > BaseTools/Source/C/GNUmakefile | 3 +
> > .../C/Include/LoongArch64/ProcessorBind.h | 80
> > +++++++++++++++++++
> > 2 files changed, 83 insertions(+)
> > create mode 100644
> > BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h
> >
> > diff --git a/BaseTools/Source/C/GNUmakefile
> > b/BaseTools/Source/C/GNUmakefile
> > index 8c191e0c38..5275f657ef 100644
> > --- a/BaseTools/Source/C/GNUmakefile
> > +++ b/BaseTools/Source/C/GNUmakefile
> > @@ -29,6 +29,9 @@ ifndef HOST_ARCH
> > ifneq (,$(findstring riscv64,$(uname_m)))
> >
> > HOST_ARCH=RISCV64
> >
> > endif
> >
> > + ifneq (,$(findstring loongarch64,$(uname_m)))
> >
> > + HOST_ARCH=LOONGARCH64
> >
> > + endif
> >
> > ifndef HOST_ARCH
> >
> > $(info Could not detected HOST_ARCH from uname results)
> >
> > $(error HOST_ARCH is not defined!)
> >
> > diff --git a/BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h
> > b/BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h
> > new file mode 100644
> > index 0000000000..0267859dee
> > --- /dev/null
> > +++ b/BaseTools/Source/C/Include/LoongArch64/ProcessorBind.h
> > @@ -0,0 +1,80 @@
> > +/** @file
> >
> > + Processor or Compiler specific defines and types for LoongArch
> >
> > +
> >
> > + Copyright (c) 2022, Loongson Technology Corporation Limited. All rights
> > reserved.<BR>
> >
> > +
> >
> > + SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > +
> >
> > +**/
> >
> > +#ifndef PROCESSOR_BIND_H_
> >
> > +#define PROCESSOR_BIND_H_
> >
> > +
> >
> > +//
> >
> > +// Define the processor type so other code can make processor based
> > choices
> >
> > +//
> >
> > +#define MDE_CPU_LOONGARCH64
> >
> > +
> >
> > +#define EFIAPI
> >
> > +
> >
> > +//
> >
> > +// Make sure we are using the correct packing rules per EFI specification
> >
> > +//
> >
> > +#ifndef __GNUC__
> >
> > +#pragma pack()
> >
> > +#endif
> >
> > +
> >
> > +//
> >
> > +// Use ANSI C 2000 stdint.h integer width declarations
> >
> > +//
> >
> > +#include <stdint.h>
> >
> > +typedef uint8_t BOOLEAN;
> >
> > +typedef int8_t INT8;
> >
> > +typedef uint8_t UINT8;
> >
> > +typedef int16_t INT16;
> >
> > +typedef uint16_t UINT16;
> >
> > +typedef int32_t INT32;
> >
> > +typedef uint32_t UINT32;
> >
> > +typedef int64_t INT64;
> >
> > +typedef uint64_t UINT64;
> >
> > +typedef char CHAR8;
> >
> > +typedef uint16_t CHAR16;
> >
> > +
> >
> > +//
> >
> > +// Unsigned value of native width. (4 bytes on supported 32-bit
> processor
> > instructions,
> >
> > +// 8 bytes on supported 64-bit processor instructions)
> >
> > +//
> >
> > +typedef UINT64 UINTN;
> >
> > +
> >
> > +//
> >
> > +// Signed value of native width. (4 bytes on supported 32-bit processor
> > instructions,
> >
> > +// 8 bytes on supported 64-bit processor instructions)
> >
> > +//
> >
> > +typedef INT64 INTN;
> >
> > +
> >
> > +//
> >
> > +// Processor specific defines
> >
> > +//
> >
> > +
> >
> > +//
> >
> > +// A value of native width with the highest bit set.
> >
> > +//
> >
> > +#define MAX_BIT 0x8000000000000000ULL
> >
> > +//
> >
> > +// A value of native width with the two highest bits set.
> >
> > +//
> >
> > +#define MAX_2_BITS 0xC000000000000000ULL
> >
> > +
> >
> > +#if defined (__GNUC__)
> >
> > +//
> >
> > +// For GNU assembly code, .global or .globl can declare global symbols.
> >
> > +// Define this macro to unify the usage.
> >
> > +//
> >
> > +#define ASM_GLOBAL .globl
> >
> > +#endif
> >
> > +
> >
> > +//
> >
> > +// The stack alignment required for LoongArch
> >
> > +//
> >
> > +#define CPU_STACK_ALIGNMENT 16
> >
> > +
> >
> > +#endif
> >
> > --
> > 2.27.0
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#93776): https://edk2.groups.io/g/devel/message/93776
> > Mute This Topic: https://groups.io/mt/93674251/4905953
> > Group Owner: devel+owner@edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub
> > [gaoliming@byosoft.com.cn]
> > -=-=-=-=-=-=
> >
>
>
>
>
>
>
>
[-- Attachment #2: Type: text/html, Size: 8162 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-09-15 7:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-09-14 9:42 [PATCH v2 34/34] BaseTools: Add LoongArch64 binding Chao Li
2022-09-15 6:34 ` 回复: [edk2-devel] " gaoliming
2022-09-15 7:45 ` 回复: edk2-devel] " Chao Li
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox