* [edk2 1/3] MdePkg: BaseRiscVSbiLib: make more useful to consumers
2023-03-02 21:49 [edk2 0/3] v2 RISC-V SBI-backed SerialLib Andrei Warkentin
@ 2023-03-02 21:49 ` Andrei Warkentin
2023-03-02 21:49 ` [edk2 2/3] [PATCH v2] MdePkg: add SecPeiRiscVSerialPortLibSbi and PrePiDxeRiscVSerialPortLibSbi Andrei Warkentin
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Andrei Warkentin @ 2023-03-02 21:49 UTC (permalink / raw)
To: devel; +Cc: Andrei Warkentin, Daniel Schaefer, Sunil V L, Gerd Hoffmann
Add a few more definitions and make SbiCall and TranslateError
usable (not static) by library users.
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
---
MdePkg/Include/Library/BaseRiscVSbiLib.h | 40 ++++++++++++++++++--
MdePkg/Library/BaseRiscVSbiLib/BaseRiscVSbiLib.c | 3 +-
2 files changed, 38 insertions(+), 5 deletions(-)
diff --git a/MdePkg/Include/Library/BaseRiscVSbiLib.h b/MdePkg/Include/Library/BaseRiscVSbiLib.h
index e75520b4b888..2244165a6b6a 100644
--- a/MdePkg/Include/Library/BaseRiscVSbiLib.h
+++ b/MdePkg/Include/Library/BaseRiscVSbiLib.h
@@ -2,6 +2,7 @@
Library to call the RISC-V SBI ecalls
Copyright (c) 2021-2022, Hewlett Packard Development LP. All rights reserved.<BR>
+ Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -18,10 +19,28 @@
#include <Uefi.h>
/* SBI Extension IDs */
-#define SBI_EXT_TIME 0x54494D45
-#define SBI_EXT_SRST 0x53525354
+#define SBI_EXT_0_1_CONSOLE_PUTCHAR 0x1
+#define SBI_EXT_0_1_CONSOLE_GETCHAR 0x2
+#define SBI_EXT_BASE 0x10
+#define SBI_EXT_DBCN 0x4442434E
+#define SBI_EXT_TIME 0x54494D45
+#define SBI_EXT_SRST 0x53525354
-/* SBI function IDs for TIME extension*/
+/* SBI function IDs for base extension */
+#define SBI_EXT_BASE_SPEC_VERSION 0x0
+#define SBI_EXT_BASE_IMPL_ID 0x1
+#define SBI_EXT_BASE_IMPL_VERSION 0x2
+#define SBI_EXT_BASE_PROBE_EXT 0x3
+#define SBI_EXT_BASE_GET_MVENDORID 0x4
+#define SBI_EXT_BASE_GET_MARCHID 0x5
+#define SBI_EXT_BASE_GET_MIMPID 0x6
+
+/* SBI function IDs for DBCN extension */
+#define SBI_EXT_DBCN_WRITE 0x0
+#define SBI_EXT_DBCN_READ 0x1
+#define SBI_EXT_DBCN_WRITE_BYTE 0x2
+
+/* SBI function IDs for TIME extension */
#define SBI_EXT_TIME_SET_TIMER 0x0
/* SBI function IDs for SRST extension */
@@ -62,6 +81,21 @@ typedef struct {
UINTN Value; ///< Value returned
} SBI_RET;
+SBI_RET
+EFIAPI
+SbiCall (
+ IN UINTN ExtId,
+ IN UINTN FuncId,
+ IN UINTN NumArgs,
+ ...
+ );
+
+EFI_STATUS
+EFIAPI
+TranslateError (
+ IN UINTN SbiError
+ );
+
VOID
EFIAPI
SbiSetTimer (
diff --git a/MdePkg/Library/BaseRiscVSbiLib/BaseRiscVSbiLib.c b/MdePkg/Library/BaseRiscVSbiLib/BaseRiscVSbiLib.c
index 2ba8f5ed366a..1141abfab9d0 100644
--- a/MdePkg/Library/BaseRiscVSbiLib/BaseRiscVSbiLib.c
+++ b/MdePkg/Library/BaseRiscVSbiLib/BaseRiscVSbiLib.c
@@ -4,6 +4,7 @@
It allows calling an SBI function via an ecall from S-Mode.
Copyright (c) 2021-2022, Hewlett Packard Development LP. All rights reserved.<BR>
+ Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -31,7 +32,6 @@
@retval Returns SBI_RET structure with value and error code.
**/
-STATIC
SBI_RET
EFIAPI
SbiCall (
@@ -88,7 +88,6 @@ SbiCall (
@param[in] SbiError SBI error code
@retval EFI_STATUS
**/
-STATIC
EFI_STATUS
EFIAPI
TranslateError (
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [edk2 2/3] [PATCH v2] MdePkg: add SecPeiRiscVSerialPortLibSbi and PrePiDxeRiscVSerialPortLibSbi
2023-03-02 21:49 [edk2 0/3] v2 RISC-V SBI-backed SerialLib Andrei Warkentin
2023-03-02 21:49 ` [edk2 1/3] MdePkg: BaseRiscVSbiLib: make more useful to consumers Andrei Warkentin
@ 2023-03-02 21:49 ` Andrei Warkentin
2023-03-02 21:49 ` [edk2 3/3] OvmfPkg: RiscVVirt: Add missing SerialPortInitialize to Sec Andrei Warkentin
2023-03-03 5:54 ` [edk2-devel] [edk2 0/3] v2 RISC-V SBI-backed SerialLib Sunil V L
3 siblings, 0 replies; 6+ messages in thread
From: Andrei Warkentin @ 2023-03-02 21:49 UTC (permalink / raw)
To: devel; +Cc: Andrei Warkentin, Daniel Schaefer, Sunil V L, Gerd Hoffmann
These are implementations of SerialPortLib using SBI console services.
- SecPeiRiscVSerialPortLibSbi is appropriate for SEC/PEI (XIP) environments
- PrePiDxeRiscVSerialPortLibSbi is appropriate for PrePI/DXE environments
Tested with:
- Qemu RiscVVirt (non-DBCN case, backed by UART)
- TinyEMU + RiscVVirt (non-DBCN case, HTIF)
- TinyEMU + RiscVVirt (DBCN case, HTIF)
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
---
MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.inf | 36 +++
MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.inf | 39 +++
MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.c | 264 ++++++++++++++++++++
MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.c | 223 +++++++++++++++++
MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.uni | 16 ++
MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.uni | 16 ++
6 files changed, 594 insertions(+)
diff --git a/MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.inf b/MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.inf
new file mode 100644
index 000000000000..b25b7e52a31c
--- /dev/null
+++ b/MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.inf
@@ -0,0 +1,36 @@
+## @file
+# Serial Port Library backed by SBI console.
+#
+# Meant for PrePi and DXE environments (where globals are allowed). See
+# SecPeiSerialPortLibRiscVSbi for a reduced variant appropriate for SEC
+# and PEI (XIP) environments.
+#
+# Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PrePiDxeRiscVSerialPortLibSbi
+ MODULE_UNI_FILE = PrePiDxeRiscVSerialPortLibSbi.uni
+ FILE_GUID = E4541241-8897-4bba-91F8-7D7E45654346
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = SerialPortLib
+
+
+#
+# VALID_ARCHITECTURES = RISCV64
+#
+
+[Sources]
+ PrePiDxeRiscVSerialPortLibSbi.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ RiscVSbiLib
diff --git a/MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.inf b/MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.inf
new file mode 100644
index 000000000000..249b0a3dcc50
--- /dev/null
+++ b/MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.inf
@@ -0,0 +1,39 @@
+## @file
+# Serial Port Library backed by SBI console.
+#
+# Meant for SEC and PEI (XIP) environments.
+#
+# Due to limitations of SBI console interface and XIP environments
+# (on use of globals), this library instance does not implement reading
+# and polling the serial port. See PrePiDxeSerialPortLibRiscVSbi for
+# the full-featured variant meant for PrePi and DXE environments.
+#
+# Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SecPeiRiscVSerialPortLibSbi
+ MODULE_UNI_FILE = SecPeiRiscVSerialPortLibSbi.uni
+ FILE_GUID = E4541241-8555-5bba-91F8-7D7E45654346
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = SerialPortLib
+
+
+#
+# VALID_ARCHITECTURES = RISCV64
+#
+
+[Sources]
+ SecPeiRiscVSerialPortLibSbi.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ RiscVSbiLib
diff --git a/MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.c b/MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.c
new file mode 100644
index 000000000000..12ef43208f59
--- /dev/null
+++ b/MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.c
@@ -0,0 +1,264 @@
+/** @file
+ Serial Port Library backed by SBI console.
+
+ Meant for PrePi and DXE environments (where globals are allowed). See
+ SecPeiSerialPortLibRiscVSbi for a reduced variant appropriate for SEC
+ and PEI (XIP) environments.
+
+ Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/SerialPortLib.h>
+#include <Library/BaseRiscVSbiLib.h>
+
+STATIC BOOLEAN mHaveDbcn = FALSE;
+STATIC INT64 mLastGetChar = -1;
+
+/**
+ Initialize the serial device hardware.
+
+ If no initialization is required, then return RETURN_SUCCESS.
+ If the serial device was successfully initialized, then return RETURN_SUCCESS.
+ If the serial device could not be initialized, then return RETURN_DEVICE_ERROR.
+
+ @retval RETURN_SUCCESS The serial device was initialized.
+ @retval RETURN_DEVICE_ERROR The serial device could not be initialized.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortInitialize (
+ VOID
+ )
+{
+ SBI_RET Ret;
+
+ Ret = SbiCall (SBI_EXT_BASE, SBI_EXT_BASE_PROBE_EXT, 1, SBI_EXT_DBCN);
+ if ((TranslateError (Ret.Error) == EFI_SUCCESS) &&
+ (Ret.Value != 0))
+ {
+ mHaveDbcn = TRUE;
+ }
+
+ return RETURN_SUCCESS;
+}
+
+/**
+ Write data from buffer to serial device.
+
+ Writes NumberOfBytes data bytes from Buffer to the serial device.
+ The number of bytes actually written to the serial device is returned.
+ If the return value is less than NumberOfBytes, then the write operation failed.
+ If Buffer is NULL, then ASSERT().
+ If NumberOfBytes is zero, then return 0.
+
+ @param Buffer The pointer to the data buffer to be written.
+ @param NumberOfBytes The number of bytes to written to the serial device.
+
+ @retval 0 NumberOfBytes is 0.
+ @retval >0 The number of bytes written to the serial device.
+ If this value is less than NumberOfBytes, then the write operation failed.
+
+**/
+UINTN
+EFIAPI
+SerialPortWrite (
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ UINTN Index;
+
+ if (mHaveDbcn) {
+ SBI_RET Ret;
+ Ret = SbiCall (
+ SBI_EXT_DBCN,
+ SBI_EXT_DBCN_WRITE,
+ 3,
+ NumberOfBytes,
+ ((UINTN)Buffer),
+ 0
+ );
+ if (TranslateError (Ret.Error) != EFI_SUCCESS) {
+ return 0;
+ }
+
+ return Ret.Value;
+ }
+
+ for (Index = 0; Index < NumberOfBytes; Index++) {
+ SbiCall (SBI_EXT_0_1_CONSOLE_PUTCHAR, 0, 1, Buffer[Index]);
+ }
+
+ return Index;
+}
+
+/**
+ Read data from serial device and save the datas in buffer.
+
+ Reads NumberOfBytes data bytes from a serial device into the buffer
+ specified by Buffer. The number of bytes actually read is returned.
+ If the return value is less than NumberOfBytes, then the rest operation failed.
+ If Buffer is NULL, then ASSERT().
+ If NumberOfBytes is zero, then return 0.
+
+ @param Buffer The pointer to the data buffer to store the data read from the serial device.
+ @param NumberOfBytes The number of bytes which will be read.
+
+ @retval 0 Read data failed; No data is to be read.
+ @retval >0 The actual number of bytes read from serial device.
+
+**/
+UINTN
+EFIAPI
+SerialPortRead (
+ OUT UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ UINTN Index = 0;
+
+ while ((Index < NumberOfBytes) && SerialPortPoll ()) {
+ Buffer[Index++] = (UINT8)mLastGetChar;
+ mLastGetChar = -1;
+ }
+
+ return Index;
+}
+
+/**
+ Polls a serial device to see if there is any data waiting to be read.
+
+ Polls a serial device to see if there is any data waiting to be read.
+ If there is data waiting to be read from the serial device, then TRUE is returned.
+ If there is no data waiting to be read from the serial device, then FALSE is returned.
+
+ @retval TRUE Data is waiting to be read from the serial device.
+ @retval FALSE There is no data waiting to be read from the serial device.
+
+**/
+BOOLEAN
+EFIAPI
+SerialPortPoll (
+ VOID
+ )
+{
+ /*
+ * Careful. OpenSBI with HTIF console will return -1 followed by -2
+ * if there is no character received. So just check for values >= 0.
+ */
+
+ if (mLastGetChar >= 0) {
+ return TRUE;
+ }
+
+ if (mHaveDbcn) {
+ UINT8 Buffer;
+ SBI_RET Ret = SbiCall (
+ SBI_EXT_DBCN,
+ SBI_EXT_DBCN_READ,
+ 3,
+ 1,
+ ((UINTN)&Buffer),
+ 0
+ );
+ if ((TranslateError (Ret.Error) == EFI_SUCCESS) &&
+ (Ret.Value == 1))
+ {
+ mLastGetChar = Buffer;
+ }
+ } else {
+ mLastGetChar = (INT64)SbiCall (SBI_EXT_0_1_CONSOLE_GETCHAR, 0, 0).Error;
+ }
+
+ return mLastGetChar >= 0;
+}
+
+/**
+ Sets the control bits on a serial device.
+
+ @param Control Sets the bits of Control that are settable.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+ IN UINT32 Control
+ )
+{
+ return RETURN_SUCCESS;
+}
+
+/**
+ Retrieve the status of the control bits on a serial device.
+
+ @param Control A pointer to return the current control signals from the serial device.
+
+ @retval RETURN_SUCCESS The control bits were read from the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+ OUT UINT32 *Control
+ )
+{
+ *Control = 0;
+ return RETURN_SUCCESS;
+}
+
+/**
+ Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ data bits, and stop bits on a serial device.
+
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
+ device's default interface speed.
+ On output, the value actually set.
+ @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
+ serial interface. A ReceiveFifoDepth value of 0 will use
+ the device's default FIFO depth.
+ On output, the value actually set.
+ @param Timeout The requested time out for a single character in microseconds.
+ This timeout applies to both the transmit and receive side of the
+ interface. A Timeout value of 0 will use the device's default time
+ out value.
+ On output, the value actually set.
+ @param Parity The type of parity to use on this serial device. A Parity value of
+ DefaultParity will use the device's default parity value.
+ On output, the value actually set.
+ @param DataBits The number of data bits to use on the serial device. A DataBits
+ vaule of 0 will use the device's default data bit setting.
+ On output, the value actually set.
+ @param StopBits The number of stop bits to use on this serial device. A StopBits
+ value of DefaultStopBits will use the device's default number of
+ stop bits.
+ On output, the value actually set.
+
+ @retval RETURN_SUCCESS The new attributes were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_INVALID_PARAMETER One or more of the attributes has an unsupported value.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+ IN OUT UINT64 *BaudRate,
+ IN OUT UINT32 *ReceiveFifoDepth,
+ IN OUT UINT32 *Timeout,
+ IN OUT EFI_PARITY_TYPE *Parity,
+ IN OUT UINT8 *DataBits,
+ IN OUT EFI_STOP_BITS_TYPE *StopBits
+ )
+{
+ return RETURN_SUCCESS;
+}
diff --git a/MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.c b/MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.c
new file mode 100644
index 000000000000..68e95db44692
--- /dev/null
+++ b/MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.c
@@ -0,0 +1,223 @@
+/** @file
+ Serial Port Library backed by SBI console.
+
+ Meant for SEC and PEI (XIP) environments.
+
+ Due to limitations of SBI console interface and XIP environments
+ (on use of globals), this library instance does not implement reading
+ and polling the serial port. See PrePiDxeSerialPortLibRiscVSbi for
+ the full-featured variant meant for PrePi and DXE environments.
+
+ Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/SerialPortLib.h>
+#include <Library/BaseRiscVSbiLib.h>
+
+/**
+ Initialize the serial device hardware.
+
+ If no initialization is required, then return RETURN_SUCCESS.
+ If the serial device was successfully initialized, then return RETURN_SUCCESS.
+ If the serial device could not be initialized, then return RETURN_DEVICE_ERROR.
+
+ @retval RETURN_SUCCESS The serial device was initialized.
+ @retval RETURN_DEVICE_ERROR The serial device could not be initialized.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortInitialize (
+ VOID
+ )
+{
+ return RETURN_SUCCESS;
+}
+
+/**
+ Write data from buffer to serial device.
+
+ Writes NumberOfBytes data bytes from Buffer to the serial device.
+ The number of bytes actually written to the serial device is returned.
+ If the return value is less than NumberOfBytes, then the write operation failed.
+ If Buffer is NULL, then ASSERT().
+ If NumberOfBytes is zero, then return 0.
+
+ @param Buffer The pointer to the data buffer to be written.
+ @param NumberOfBytes The number of bytes to written to the serial device.
+
+ @retval 0 NumberOfBytes is 0.
+ @retval >0 The number of bytes written to the serial device.
+ If this value is less than NumberOfBytes, then the write operation failed.
+
+**/
+UINTN
+EFIAPI
+SerialPortWrite (
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ SBI_RET Ret;
+ UINTN Index;
+
+ Ret = SbiCall (SBI_EXT_BASE, SBI_EXT_BASE_PROBE_EXT, 1, SBI_EXT_DBCN);
+ if ((TranslateError (Ret.Error) == EFI_SUCCESS) &&
+ (Ret.Value != 0))
+ {
+ Ret = SbiCall (
+ SBI_EXT_DBCN,
+ SBI_EXT_DBCN_WRITE,
+ 3,
+ NumberOfBytes,
+ ((UINTN)Buffer),
+ 0
+ );
+ if (TranslateError (Ret.Error) != EFI_SUCCESS) {
+ return 0;
+ }
+
+ return Ret.Value;
+ }
+
+ for (Index = 0; Index < NumberOfBytes; Index++) {
+ SbiCall (SBI_EXT_0_1_CONSOLE_PUTCHAR, 0, 1, Buffer[Index]);
+ }
+
+ return Index;
+}
+
+/**
+ Read data from serial device and save the datas in buffer.
+
+ Reads NumberOfBytes data bytes from a serial device into the buffer
+ specified by Buffer. The number of bytes actually read is returned.
+ If the return value is less than NumberOfBytes, then the rest operation failed.
+ If Buffer is NULL, then ASSERT().
+ If NumberOfBytes is zero, then return 0.
+
+ @param Buffer The pointer to the data buffer to store the data read from the serial device.
+ @param NumberOfBytes The number of bytes which will be read.
+
+ @retval 0 Read data failed; No data is to be read.
+ @retval >0 The actual number of bytes read from serial device.
+
+**/
+UINTN
+EFIAPI
+SerialPortRead (
+ OUT UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ return 0;
+}
+
+/**
+ Polls a serial device to see if there is any data waiting to be read.
+
+ Polls a serial device to see if there is any data waiting to be read.
+ If there is data waiting to be read from the serial device, then TRUE is returned.
+ If there is no data waiting to be read from the serial device, then FALSE is returned.
+
+ @retval TRUE Data is waiting to be read from the serial device.
+ @retval FALSE There is no data waiting to be read from the serial device.
+
+**/
+BOOLEAN
+EFIAPI
+SerialPortPoll (
+ VOID
+ )
+{
+ return FALSE;
+}
+
+/**
+ Sets the control bits on a serial device.
+
+ @param Control Sets the bits of Control that are settable.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+ IN UINT32 Control
+ )
+{
+ return RETURN_SUCCESS;
+}
+
+/**
+ Retrieve the status of the control bits on a serial device.
+
+ @param Control A pointer to return the current control signals from the serial device.
+
+ @retval RETURN_SUCCESS The control bits were read from the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+ OUT UINT32 *Control
+ )
+{
+ *Control = 0;
+ return RETURN_SUCCESS;
+}
+
+/**
+ Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ data bits, and stop bits on a serial device.
+
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
+ device's default interface speed.
+ On output, the value actually set.
+ @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
+ serial interface. A ReceiveFifoDepth value of 0 will use
+ the device's default FIFO depth.
+ On output, the value actually set.
+ @param Timeout The requested time out for a single character in microseconds.
+ This timeout applies to both the transmit and receive side of the
+ interface. A Timeout value of 0 will use the device's default time
+ out value.
+ On output, the value actually set.
+ @param Parity The type of parity to use on this serial device. A Parity value of
+ DefaultParity will use the device's default parity value.
+ On output, the value actually set.
+ @param DataBits The number of data bits to use on the serial device. A DataBits
+ vaule of 0 will use the device's default data bit setting.
+ On output, the value actually set.
+ @param StopBits The number of stop bits to use on this serial device. A StopBits
+ value of DefaultStopBits will use the device's default number of
+ stop bits.
+ On output, the value actually set.
+
+ @retval RETURN_SUCCESS The new attributes were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_INVALID_PARAMETER One or more of the attributes has an unsupported value.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+ IN OUT UINT64 *BaudRate,
+ IN OUT UINT32 *ReceiveFifoDepth,
+ IN OUT UINT32 *Timeout,
+ IN OUT EFI_PARITY_TYPE *Parity,
+ IN OUT UINT8 *DataBits,
+ IN OUT EFI_STOP_BITS_TYPE *StopBits
+ )
+{
+ return RETURN_SUCCESS;
+}
diff --git a/MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.uni b/MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.uni
new file mode 100644
index 000000000000..7b22caa5a090
--- /dev/null
+++ b/MdePkg/Library/PrePiDxeRiscVSerialPortLibSbi/PrePiDxeRiscVSerialPortLibSbi.uni
@@ -0,0 +1,16 @@
+// /** @file
+// Serial Port Library backed by SBI console.
+//
+// Serial Port Library backed by SBI console.
+//
+// Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "Serial Port Library backed by SBI console"
+
+#string STR_MODULE_DESCRIPTION #language en-US "Serial Port Library backed by SBI console."
+
diff --git a/MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.uni b/MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.uni
new file mode 100644
index 000000000000..7b22caa5a090
--- /dev/null
+++ b/MdePkg/Library/SecPeiRiscVSerialPortLibSbi/SecPeiRiscVSerialPortLibSbi.uni
@@ -0,0 +1,16 @@
+// /** @file
+// Serial Port Library backed by SBI console.
+//
+// Serial Port Library backed by SBI console.
+//
+// Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "Serial Port Library backed by SBI console"
+
+#string STR_MODULE_DESCRIPTION #language en-US "Serial Port Library backed by SBI console."
+
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread