[PATCH v6 2/3] MdePkg: add SBI-based SerialPortLib for RISC-V

["Andrei Warkentin" <andrei.warkentin@intel.com>]

These are implementations of SerialPortLib using SBI console services.
- BaseSerialPortLibRiscVSbiLib is appropriate for SEC/PEI (XIP) environments
- BaseSerialPortLibRiscVSbiLibRam is appropriate for PrePI/DXE environments

Tested with:
- Qemu RiscVVirt (non-DBCN case, backed by UART)
- TinyEMU + RiscVVirt (non-DBCN case, HTIF)
- TinyEMU + RiscVVirt (DBCN case, HTIF)

Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
---
 MdePkg/MdePkg.dsc                                                                  |   2 +
 MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.inf       |  39 +++
 MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.inf |  36 +++
 MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.c         | 233 ++++++++++++++++
 MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.c   | 288 ++++++++++++++++++++
 MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.uni       |  16 ++
 MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.uni |  16 ++
 7 files changed, 630 insertions(+)

diff --git a/MdePkg/MdePkg.dsc b/MdePkg/MdePkg.dsc
index 0ac7618b4623..ceccc078ff04 100644
--- a/MdePkg/MdePkg.dsc
+++ b/MdePkg/MdePkg.dsc
@@ -192,5 +192,7 @@ [Components.ARM, Components.AARCH64]
 
 [Components.RISCV64]
   MdePkg/Library/BaseRiscVSbiLib/BaseRiscVSbiLib.inf
+  MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.inf
+  MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.inf
 
 [BuildOptions]
diff --git a/MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.inf b/MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.inf
new file mode 100644
index 000000000000..09cf59f190f6
--- /dev/null
+++ b/MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.inf
@@ -0,0 +1,39 @@
+## @file
+#  Serial Port Library backed by SBI console.
+#
+#  Meant for SEC and PEI (XIP) environments.
+#
+#  Due to limitations of SBI console interface and XIP environments
+#  (on use of globals), this library instance does not implement reading
+#  and polling the serial port. See PrePiDxeSerialPortLibRiscVSbi for
+#  the full-featured variant meant for PrePi and DXE environments.
+#
+#  Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+#
+#  SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+##
+
+[Defines]
+  INF_VERSION                    = 0x0001001B
+  BASE_NAME                      = BaseSerialPortLibRiscVSbiLib
+  MODULE_UNI_FILE                = BaseSerialPortLibRiscVSbiLib.uni
+  FILE_GUID                      = 639fad38-4bfd-4eb9-9f09-e97c7947d480
+  MODULE_TYPE                    = BASE
+  VERSION_STRING                 = 1.0
+  LIBRARY_CLASS                  = SerialPortLib | SEC PEI_CORE PEIM
+
+
+#
+#  VALID_ARCHITECTURES           = RISCV64
+#
+
+[Sources]
+  BaseSerialPortLibRiscVSbiLib.c
+
+[Packages]
+  MdePkg/MdePkg.dec
+
+[LibraryClasses]
+  RiscVSbiLib
diff --git a/MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.inf b/MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.inf
new file mode 100644
index 000000000000..b7ad1548a309
--- /dev/null
+++ b/MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.inf
@@ -0,0 +1,36 @@
+## @file
+#  Serial Port Library backed by SBI console.
+#
+#  Meant for PrePi and DXE environments (where globals are allowed). See
+#  BaseSerialPortLibRiscVSbiLib for a reduced variant appropriate for SEC
+#  and PEI (XIP) environments.
+#
+#  Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+#
+#  SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+##
+
+[Defines]
+  INF_VERSION                    = 0x0001001B
+  BASE_NAME                      = BaseSerialPortLibRiscVSbiLibRam
+  MODULE_UNI_FILE                = BaseSerialPortLibRiscVSbiLibRam.uni
+  FILE_GUID                      = 872af743-ab56-45b4-a065-602567f4820c
+  MODULE_TYPE                    = BASE
+  VERSION_STRING                 = 1.0
+  LIBRARY_CLASS                  = SerialPortLib | SEC DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER UEFI_DRIVER UEFI_APPLICATION
+
+
+#
+#  VALID_ARCHITECTURES           = RISCV64
+#
+
+[Sources]
+  BaseSerialPortLibRiscVSbiLibRam.c
+
+[Packages]
+  MdePkg/MdePkg.dec
+
+[LibraryClasses]
+  RiscVSbiLib
diff --git a/MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.c b/MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.c
new file mode 100644
index 000000000000..0ad5931be3ae
--- /dev/null
+++ b/MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.c
@@ -0,0 +1,233 @@
+/** @file
+  Serial Port Library backed by SBI console.
+
+  Meant for SEC and PEI (XIP) environments.
+
+  Due to limitations of SBI console interface and XIP environments
+  (on use of globals), this library instance does not implement reading
+  and polling the serial port. See PrePiDxeSerialPortLibRiscVSbi for
+  the full-featured variant meant for PrePi and DXE environments.
+
+  Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/SerialPortLib.h>
+#include <Library/BaseRiscVSbiLib.h>
+
+/**
+  Initialize the serial device hardware.
+
+  If no initialization is required, then return RETURN_SUCCESS.
+  If the serial device was successfully initialized, then return RETURN_SUCCESS.
+  If the serial device could not be initialized, then return RETURN_DEVICE_ERROR.
+
+  @retval RETURN_SUCCESS        The serial device was initialized.
+  @retval RETURN_DEVICE_ERROR   The serial device could not be initialized.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortInitialize (
+  VOID
+  )
+{
+  return RETURN_SUCCESS;
+}
+
+/**
+  Write data from buffer to serial device.
+
+  Writes NumberOfBytes data bytes from Buffer to the serial device.
+  The number of bytes actually written to the serial device is returned.
+  If the return value is less than NumberOfBytes, then the write operation failed.
+  If Buffer is NULL, then ASSERT().
+  If NumberOfBytes is zero, then return 0.
+
+  @param  Buffer           The pointer to the data buffer to be written.
+  @param  NumberOfBytes    The number of bytes to written to the serial device.
+
+  @retval 0                NumberOfBytes is 0.
+  @retval >0               The number of bytes written to the serial device.
+                           If this value is less than NumberOfBytes, then the write operation failed.
+
+**/
+UINTN
+EFIAPI
+SerialPortWrite (
+  IN UINT8  *Buffer,
+  IN UINTN  NumberOfBytes
+  )
+{
+  SBI_RET  Ret;
+  UINTN    Index;
+
+  Ret = SbiCall (SBI_EXT_BASE, SBI_EXT_BASE_PROBE_EXT, 1, SBI_EXT_DBCN);
+  if ((TranslateError (Ret.Error) == EFI_SUCCESS) &&
+      (Ret.Value != 0))
+  {
+    Ret = SbiCall (
+            SBI_EXT_DBCN,
+            SBI_EXT_DBCN_WRITE,
+            3,
+            NumberOfBytes,
+            ((UINTN)Buffer),
+            0
+            );
+    if (TranslateError (Ret.Error) != EFI_SUCCESS) {
+      return 0;
+    }
+
+    return Ret.Value;
+  }
+
+  Ret = SbiCall (SBI_EXT_BASE, SBI_EXT_BASE_PROBE_EXT, 1, SBI_EXT_0_1_CONSOLE_PUTCHAR);
+  if ((TranslateError (Ret.Error) == EFI_SUCCESS) &&
+      (Ret.Value != 0))
+  {
+    for (Index = 0; Index < NumberOfBytes; Index++) {
+      SbiCall (SBI_EXT_0_1_CONSOLE_PUTCHAR, 0, 1, Buffer[Index]);
+    }
+
+    return Index;
+  }
+
+  /*
+   * Neither DBCN or legacy extension were present.
+   */
+  return NumberOfBytes;
+}
+
+/**
+  Read data from serial device and save the datas in buffer.
+
+  Reads NumberOfBytes data bytes from a serial device into the buffer
+  specified by Buffer. The number of bytes actually read is returned.
+  If the return value is less than NumberOfBytes, then the rest operation failed.
+  If Buffer is NULL, then ASSERT().
+  If NumberOfBytes is zero, then return 0.
+
+  @param  Buffer           The pointer to the data buffer to store the data read from the serial device.
+  @param  NumberOfBytes    The number of bytes which will be read.
+
+  @retval 0                Read data failed; No data is to be read.
+  @retval >0               The actual number of bytes read from serial device.
+
+**/
+UINTN
+EFIAPI
+SerialPortRead (
+  OUT UINT8  *Buffer,
+  IN  UINTN  NumberOfBytes
+  )
+{
+  return 0;
+}
+
+/**
+  Polls a serial device to see if there is any data waiting to be read.
+
+  Polls a serial device to see if there is any data waiting to be read.
+  If there is data waiting to be read from the serial device, then TRUE is returned.
+  If there is no data waiting to be read from the serial device, then FALSE is returned.
+
+  @retval TRUE             Data is waiting to be read from the serial device.
+  @retval FALSE            There is no data waiting to be read from the serial device.
+
+**/
+BOOLEAN
+EFIAPI
+SerialPortPoll (
+  VOID
+  )
+{
+  return FALSE;
+}
+
+/**
+  Sets the control bits on a serial device.
+
+  @param Control                Sets the bits of Control that are settable.
+
+  @retval RETURN_SUCCESS        The new control bits were set on the serial device.
+  @retval RETURN_UNSUPPORTED    The serial device does not support this operation.
+  @retval RETURN_DEVICE_ERROR   The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+  IN UINT32  Control
+  )
+{
+  return RETURN_SUCCESS;
+}
+
+/**
+  Retrieve the status of the control bits on a serial device.
+
+  @param Control                A pointer to return the current control signals from the serial device.
+
+  @retval RETURN_SUCCESS        The control bits were read from the serial device.
+  @retval RETURN_UNSUPPORTED    The serial device does not support this operation.
+  @retval RETURN_DEVICE_ERROR   The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+  OUT UINT32  *Control
+  )
+{
+  *Control = 0;
+  return RETURN_SUCCESS;
+}
+
+/**
+  Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+  data bits, and stop bits on a serial device.
+
+  @param BaudRate           The requested baud rate. A BaudRate value of 0 will use the
+                            device's default interface speed.
+                            On output, the value actually set.
+  @param ReveiveFifoDepth   The requested depth of the FIFO on the receive side of the
+                            serial interface. A ReceiveFifoDepth value of 0 will use
+                            the device's default FIFO depth.
+                            On output, the value actually set.
+  @param Timeout            The requested time out for a single character in microseconds.
+                            This timeout applies to both the transmit and receive side of the
+                            interface. A Timeout value of 0 will use the device's default time
+                            out value.
+                            On output, the value actually set.
+  @param Parity             The type of parity to use on this serial device. A Parity value of
+                            DefaultParity will use the device's default parity value.
+                            On output, the value actually set.
+  @param DataBits           The number of data bits to use on the serial device. A DataBits
+                            vaule of 0 will use the device's default data bit setting.
+                            On output, the value actually set.
+  @param StopBits           The number of stop bits to use on this serial device. A StopBits
+                            value of DefaultStopBits will use the device's default number of
+                            stop bits.
+                            On output, the value actually set.
+
+  @retval RETURN_SUCCESS            The new attributes were set on the serial device.
+  @retval RETURN_UNSUPPORTED        The serial device does not support this operation.
+  @retval RETURN_INVALID_PARAMETER  One or more of the attributes has an unsupported value.
+  @retval RETURN_DEVICE_ERROR       The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+  IN OUT UINT64              *BaudRate,
+  IN OUT UINT32              *ReceiveFifoDepth,
+  IN OUT UINT32              *Timeout,
+  IN OUT EFI_PARITY_TYPE     *Parity,
+  IN OUT UINT8               *DataBits,
+  IN OUT EFI_STOP_BITS_TYPE  *StopBits
+  )
+{
+  return RETURN_SUCCESS;
+}
diff --git a/MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.c b/MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.c
new file mode 100644
index 000000000000..74277241bba4
--- /dev/null
+++ b/MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.c
@@ -0,0 +1,288 @@
+/** @file
+  Serial Port Library backed by SBI console.
+
+  Meant for PrePi and DXE environments (where globals are allowed). See
+  BaseSerialPortLibRiscVSbiLib for a reduced variant appropriate for SEC
+  and PEI (XIP) environments.
+
+  Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/SerialPortLib.h>
+#include <Library/BaseRiscVSbiLib.h>
+
+STATIC BOOLEAN  mHaveDbcn          = FALSE;
+STATIC BOOLEAN  mHaveLegacyPutchar = FALSE;
+STATIC BOOLEAN  mHaveLegacyGetchar = FALSE;
+STATIC INT64    mLastGetChar       = -1;
+
+/**
+  Initialize the serial device hardware.
+
+  If no initialization is required, then return RETURN_SUCCESS.
+  If the serial device was successfully initialized, then return RETURN_SUCCESS.
+  If the serial device could not be initialized, then return RETURN_DEVICE_ERROR.
+
+  @retval RETURN_SUCCESS        The serial device was initialized.
+  @retval RETURN_DEVICE_ERROR   The serial device could not be initialized.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortInitialize (
+  VOID
+  )
+{
+  SBI_RET  Ret;
+
+  Ret = SbiCall (SBI_EXT_BASE, SBI_EXT_BASE_PROBE_EXT, 1, SBI_EXT_DBCN);
+  if ((TranslateError (Ret.Error) == EFI_SUCCESS) &&
+      (Ret.Value != 0))
+  {
+    mHaveDbcn = TRUE;
+  } else {
+    Ret = SbiCall (SBI_EXT_BASE, SBI_EXT_BASE_PROBE_EXT, 1, SBI_EXT_0_1_CONSOLE_PUTCHAR);
+    if ((TranslateError (Ret.Error) == EFI_SUCCESS) &&
+        (Ret.Value != 0))
+    {
+      mHaveLegacyPutchar = TRUE;
+    }
+
+    Ret = SbiCall (SBI_EXT_BASE, SBI_EXT_BASE_PROBE_EXT, 1, SBI_EXT_0_1_CONSOLE_GETCHAR);
+    if ((TranslateError (Ret.Error) == EFI_SUCCESS) &&
+        (Ret.Value != 0))
+    {
+      mHaveLegacyGetchar = TRUE;
+    }
+  }
+
+  return RETURN_SUCCESS;
+}
+
+/**
+  Write data from buffer to serial device.
+
+  Writes NumberOfBytes data bytes from Buffer to the serial device.
+  The number of bytes actually written to the serial device is returned.
+  If the return value is less than NumberOfBytes, then the write operation failed.
+  If Buffer is NULL, then ASSERT().
+  If NumberOfBytes is zero, then return 0.
+
+  @param  Buffer           The pointer to the data buffer to be written.
+  @param  NumberOfBytes    The number of bytes to written to the serial device.
+
+  @retval 0                NumberOfBytes is 0.
+  @retval >0               The number of bytes written to the serial device.
+                           If this value is less than NumberOfBytes, then the write operation failed.
+
+**/
+UINTN
+EFIAPI
+SerialPortWrite (
+  IN UINT8  *Buffer,
+  IN UINTN  NumberOfBytes
+  )
+{
+  UINTN  Index;
+
+  if (mHaveDbcn) {
+    SBI_RET  Ret;
+    Ret = SbiCall (
+            SBI_EXT_DBCN,
+            SBI_EXT_DBCN_WRITE,
+            3,
+            NumberOfBytes,
+            ((UINTN)Buffer),
+            0
+            );
+    if (TranslateError (Ret.Error) != EFI_SUCCESS) {
+      return 0;
+    }
+
+    return Ret.Value;
+  } else if (mHaveLegacyPutchar) {
+    for (Index = 0; Index < NumberOfBytes; Index++) {
+      SbiCall (SBI_EXT_0_1_CONSOLE_PUTCHAR, 0, 1, Buffer[Index]);
+    }
+
+    return Index;
+  }
+
+  /*
+   * Neither DBCN or legacy extension were present.
+   */
+  return NumberOfBytes;
+}
+
+/**
+  Read data from serial device and save the datas in buffer.
+
+  Reads NumberOfBytes data bytes from a serial device into the buffer
+  specified by Buffer. The number of bytes actually read is returned.
+  If the return value is less than NumberOfBytes, then the rest operation failed.
+  If Buffer is NULL, then ASSERT().
+  If NumberOfBytes is zero, then return 0.
+
+  @param  Buffer           The pointer to the data buffer to store the data read from the serial device.
+  @param  NumberOfBytes    The number of bytes which will be read.
+
+  @retval 0                Read data failed; No data is to be read.
+  @retval >0               The actual number of bytes read from serial device.
+
+**/
+UINTN
+EFIAPI
+SerialPortRead (
+  OUT UINT8  *Buffer,
+  IN  UINTN  NumberOfBytes
+  )
+{
+  UINTN  Index;
+
+  Index = 0;
+  while ((Index < NumberOfBytes) && SerialPortPoll ()) {
+    Buffer[Index++] = (UINT8)mLastGetChar;
+    mLastGetChar    = -1;
+  }
+
+  return Index;
+}
+
+/**
+  Polls a serial device to see if there is any data waiting to be read.
+
+  Polls a serial device to see if there is any data waiting to be read.
+  If there is data waiting to be read from the serial device, then TRUE is returned.
+  If there is no data waiting to be read from the serial device, then FALSE is returned.
+
+  @retval TRUE             Data is waiting to be read from the serial device.
+  @retval FALSE            There is no data waiting to be read from the serial device.
+
+**/
+BOOLEAN
+EFIAPI
+SerialPortPoll (
+  VOID
+  )
+{
+  /*
+   * Careful. OpenSBI with HTIF console will return -1 followed by -2
+   * if there is no character received. So just check for values >= 0.
+   */
+
+  if (mLastGetChar >= 0) {
+    return TRUE;
+  }
+
+  if (mHaveDbcn) {
+    UINT8    Buffer;
+    SBI_RET  Ret;
+
+    Ret = SbiCall (
+            SBI_EXT_DBCN,
+            SBI_EXT_DBCN_READ,
+            3,
+            1,
+            ((UINTN)&Buffer),
+            0
+            );
+    if ((TranslateError (Ret.Error) == EFI_SUCCESS) &&
+        (Ret.Value == 1))
+    {
+      mLastGetChar = Buffer;
+    }
+  } else if (mHaveLegacyGetchar) {
+    mLastGetChar = (INT64)SbiCall (SBI_EXT_0_1_CONSOLE_GETCHAR, 0, 0).Error;
+  }
+
+  return mLastGetChar >= 0;
+}
+
+/**
+  Sets the control bits on a serial device.
+
+  @param Control                Sets the bits of Control that are settable.
+
+  @retval RETURN_SUCCESS        The new control bits were set on the serial device.
+  @retval RETURN_UNSUPPORTED    The serial device does not support this operation.
+  @retval RETURN_DEVICE_ERROR   The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+  IN UINT32  Control
+  )
+{
+  return RETURN_SUCCESS;
+}
+
+/**
+  Retrieve the status of the control bits on a serial device.
+
+  @param Control                A pointer to return the current control signals from the serial device.
+
+  @retval RETURN_SUCCESS        The control bits were read from the serial device.
+  @retval RETURN_UNSUPPORTED    The serial device does not support this operation.
+  @retval RETURN_DEVICE_ERROR   The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+  OUT UINT32  *Control
+  )
+{
+  *Control = 0;
+  return RETURN_SUCCESS;
+}
+
+/**
+  Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+  data bits, and stop bits on a serial device.
+
+  @param BaudRate           The requested baud rate. A BaudRate value of 0 will use the
+                            device's default interface speed.
+                            On output, the value actually set.
+  @param ReveiveFifoDepth   The requested depth of the FIFO on the receive side of the
+                            serial interface. A ReceiveFifoDepth value of 0 will use
+                            the device's default FIFO depth.
+                            On output, the value actually set.
+  @param Timeout            The requested time out for a single character in microseconds.
+                            This timeout applies to both the transmit and receive side of the
+                            interface. A Timeout value of 0 will use the device's default time
+                            out value.
+                            On output, the value actually set.
+  @param Parity             The type of parity to use on this serial device. A Parity value of
+                            DefaultParity will use the device's default parity value.
+                            On output, the value actually set.
+  @param DataBits           The number of data bits to use on the serial device. A DataBits
+                            vaule of 0 will use the device's default data bit setting.
+                            On output, the value actually set.
+  @param StopBits           The number of stop bits to use on this serial device. A StopBits
+                            value of DefaultStopBits will use the device's default number of
+                            stop bits.
+                            On output, the value actually set.
+
+  @retval RETURN_SUCCESS            The new attributes were set on the serial device.
+  @retval RETURN_UNSUPPORTED        The serial device does not support this operation.
+  @retval RETURN_INVALID_PARAMETER  One or more of the attributes has an unsupported value.
+  @retval RETURN_DEVICE_ERROR       The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+  IN OUT UINT64              *BaudRate,
+  IN OUT UINT32              *ReceiveFifoDepth,
+  IN OUT UINT32              *Timeout,
+  IN OUT EFI_PARITY_TYPE     *Parity,
+  IN OUT UINT8               *DataBits,
+  IN OUT EFI_STOP_BITS_TYPE  *StopBits
+  )
+{
+  return RETURN_SUCCESS;
+}
diff --git a/MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.uni b/MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.uni
new file mode 100644
index 000000000000..7b22caa5a090
--- /dev/null
+++ b/MdePkg/Library/BaseSerialPortLibRiscVSbiLib/BaseSerialPortLibRiscVSbiLib.uni
@@ -0,0 +1,16 @@
+// /** @file
+// Serial Port Library backed by SBI console.
+//
+// Serial Port Library backed by SBI console.
+//
+// Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT             #language en-US "Serial Port Library backed by SBI console"
+
+#string STR_MODULE_DESCRIPTION          #language en-US "Serial Port Library backed by SBI console."
+
diff --git a/MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.uni b/MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.uni
new file mode 100644
index 000000000000..7b22caa5a090
--- /dev/null
+++ b/MdePkg/Library/BaseSerialPortLibRiscVSbiLibRam/BaseSerialPortLibRiscVSbiLibRam.uni
@@ -0,0 +1,16 @@
+// /** @file
+// Serial Port Library backed by SBI console.
+//
+// Serial Port Library backed by SBI console.
+//
+// Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT             #language en-US "Serial Port Library backed by SBI console"
+
+#string STR_MODULE_DESCRIPTION          #language en-US "Serial Port Library backed by SBI console."
+
-- 
2.25.1