From: "Jeff Fan via groups.io" <fanjianfeng=byosoft.com.cn@groups.io>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"Yuanhao Xie" <yuanhao.xie@intel.com>
Cc: "Dong, Eric" <eric.dong@intel.com>, "Ni, Ray" <ray.ni@intel.com>,
"Rahul Kumar" <rahul1.kumar@intel.com>,
"Gerd Hoffmann" <kraxel@redhat.com>,
"Yuanhao Xie" <yuanhao.xie@intel.com>
Subject: 回复: Re: [edk2-devel] [Patch V6 4/4] UefiCpuPkg:Wake up APs after power-up or RESET through SIPI.
Date: Fri, 28 Jul 2023 14:57:08 +0800 [thread overview]
Message-ID: <202307281457084131094@byosoft.com.cn> (raw)
In-Reply-To: 202307281449476781951@byosoft.com.cn
[-- Attachment #1: Type: text/plain, Size: 3473 bytes --]
Yuanhao,
Sorry. I are missing the following updating.
+ if ((CpuMpData->InitFlag == ApInitConfig)
Please ignore my last comments ! :-)
Reviewed-by: Jeff Fan <fanjianfeng@byosoft.com.cn>
Thanks!
Jeff
fanjianfeng@byosoft.com.cn
发件人: fanjianfeng@byosoft.com.cn
发送时间: 2023-07-28 14:49
收件人: devel@edk2.groups.io; yuanhao.xie
抄送: Dong, Eric; Ni, Ray; Rahul Kumar; Gerd Hoffmann; Yuanhao Xie
主题: Re: [edk2-devel] [Patch V6 4/4] UefiCpuPkg:Wake up APs after power-up or RESET through SIPI.
Yuanhao,
Have you verirfed whether APs could be waken-up from ApInHltLoop state or not?
Thanks!
Jeff
fanjianfeng@byosoft.com.cn
From: Yuanhao Xie
Date: 2023-07-28 14:25
To: devel
CC: Eric Dong; Ray Ni; Rahul Kumar; Gerd Hoffmann; Yuanhao Xie
Subject: [edk2-devel] [Patch V6 4/4] UefiCpuPkg:Wake up APs after power-up or RESET through SIPI.
The implementation of this new behavior aligns with the guidelines
outlined in the Intel SDM.
Following a power-up or RESET of an MP system, system hardware
dynamically selects one of the processors on the system bus as the BSP.
The remaining processors are designated as APs. The APs complete a
minimal self-configuration, then wait for a startup signal (a SIPI
message) from the BSP processor.
Additionally, the MP protocol is executed only after
a power-up or RESET. If the MP protocol has completed and a
BSP is chosen, subsequent INITs (either to a specific processor or
system wide) do not cause the MP protocol to be repeated. Instead, each
logical processor examines its BSP flag (in the IA32_APIC_BASE MSR) to
determine whether it should execute the BIOS boot-strap code (if it is
the BSP) or enter a wait-for-SIPI state (if it is an AP).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
---
UefiCpuPkg/Library/MpInitLib/MpLib.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index e7054adbcc..6f1456cfe1 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -1294,7 +1294,14 @@ WakeUpAP (
if (CpuMpData->SevSnpIsEnabled && (CpuMpData->InitFlag != ApInitConfig)) {
SevSnpCreateAP (CpuMpData, -1);
} else {
- SendInitSipiSipiAllExcludingSelf ((UINT32)ExchangeInfo->BufferStart);
+ if ((CpuMpData->InitFlag == ApInitConfig) && FixedPcdGetBool (PcdFirstTimeWakeUpAPsBySipi)) {
+ //
+ // SIPI can be used for the first time wake up after reset to reduce boot time.
+ //
+ SendStartupIpiAllExcludingSelf ((UINT32)ExchangeInfo->BufferStart);
+ } else {
+ SendInitSipiSipiAllExcludingSelf ((UINT32)ExchangeInfo->BufferStart);
+ }
}
}
--
2.36.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#107370): https://edk2.groups.io/g/devel/message/107370
Mute This Topic: https://groups.io/mt/100406183/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 8194 bytes --]
prev parent reply other threads:[~2023-07-28 6:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-28 6:25 [edk2-devel] [Patch V6 0/4]Wake up APs after power-up or RESET through SIPI Yuanhao Xie
2023-07-28 6:25 ` [edk2-devel] [Patch V6 1/4] UefiCpuPkg: Add SendStartupIpiAllExcludingSelf Yuanhao Xie
2023-07-28 6:25 ` [edk2-devel] [Patch V6 2/4] UefiCpuPkg: Add PcdFirstTimeWakeUpAPsBySipi Yuanhao Xie
2023-07-28 6:25 ` [edk2-devel] [Patch V6 3/4] OvmfPkg: Disable PcdFirstTimeWakeUpAPsBySipi Yuanhao Xie
2023-07-28 6:25 ` [edk2-devel] [Patch V6 4/4] UefiCpuPkg:Wake up APs after power-up or RESET through SIPI Yuanhao Xie
2023-07-28 6:49 ` Jeff Fan via groups.io
2023-07-28 6:57 ` Jeff Fan via groups.io [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202307281457084131094@byosoft.com.cn \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox