From: "Chang, Abner via groups.io" <abner.chang=amd.com@groups.io>
To: <devel@edk2.groups.io>
Cc: Michael D Kinney <michael.d.kinney@intel.com>,
Liming Gao <gaoliming@byosoft.com.cn>,
Zhiguang Liu <zhiguang.liu@intel.com>,
"Abdul Lateef Attar" <abdattar@amd.com>
Subject: [edk2-devel] [PATCH V2 2/6] MdePkg/Include: Add SPI NOR Flash JEDEC SFDP header file
Date: Tue, 1 Aug 2023 15:57:21 +0800 [thread overview]
Message-ID: <20230801075725.1102-3-abner.chang@amd.com> (raw)
In-Reply-To: <20230801075725.1102-1-abner.chang@amd.com>
From: Abner Chang <abner.chang@amd.com>
BZ#: 4472
Add definition of JEDEC Serial Flash Discoverable Parameters
(SFDP) specification.
https://www.jedec.org/standards-documents/docs/jesd216b
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Abdul Lateef Attar <abdattar@amd.com>
---
.../IndustryStandard/SpiNorFlashJedecSfdp.h | 324 ++++++++++++++++++
1 file changed, 324 insertions(+)
create mode 100644 MdePkg/Include/IndustryStandard/SpiNorFlashJedecSfdp.h
diff --git a/MdePkg/Include/IndustryStandard/SpiNorFlashJedecSfdp.h b/MdePkg/Include/IndustryStandard/SpiNorFlashJedecSfdp.h
new file mode 100644
index 00000000000..44ab5a12633
--- /dev/null
+++ b/MdePkg/Include/IndustryStandard/SpiNorFlashJedecSfdp.h
@@ -0,0 +1,324 @@
+/** @file
+ SPI NOR Flash JEDEC Serial Flash Discoverable Parameters (SFDP)
+ header file.
+
+ Copyright (C) 2023 Advanced Micro Devices, Inc. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Revision Reference:
+ - JEDEC Standard, JESD216F.02
+ https://www.jedec.org/document_search?search_api_views_fulltext=JESD216
+
+ @par Glossary:
+ - SFDP - Serial Flash Discoverable Parameters
+ - PTP - Parameter Table Pointer
+**/
+
+#ifndef SPI_NOR_FLASH_JEDEC_H_
+#define SPI_NOR_FLASH_JEDEC_H_
+
+#include <Base.h>
+
+#define SFDP_HEADER_SIGNATURE 0x50444653
+#define SFDP_SUPPORTED_MAJOR_REVISION 0x1ul
+
+/// JEDEC Basic Flash Parameter Header
+#define SFDP_BASIC_PARAMETER_ID_LSB 0x00
+#define SFDP_BASIC_PARAMETER_ID_MSB 0xFF
+
+///
+/// JDEC Sector Map Parameter Header and Table
+///
+#define SFDP_SECTOR_MAP_PARAMETER_ID_LSB 0x81
+#define SFDP_FOUR_BYTE_ADDRESS_INSTRUCTION_LSB 0x84
+#define SFDP_SECTOR_MAP_PARAMETER_ID_MSB 0xFF
+
+#define SFDP_FLASH_MEMORY_DENSITY_4GBIT 0x80000000
+
+#pragma pack (1)
+typedef struct _SFDP_HEADER {
+ UINT32 Signature;
+ UINT32 MinorRev : 8;
+ UINT32 MajorRev : 8;
+ UINT32 NumParameterHeaders : 8;
+ UINT32 AccessProtocol : 8;
+} SFDP_HEADER;
+
+typedef struct _SFDP_PARAMETER_HEADER {
+ UINT32 IdLsb : 8;
+ UINT32 MinorRev : 8;
+ UINT32 MajorRev : 8;
+ UINT32 Length : 8;
+ UINT32 TablePointer : 24;
+ UINT32 IdMsb : 8;
+} SFDP_PARAMETER_HEADER;
+
+typedef struct _SFDP_BASIC_FLASH_PARAMETER {
+ // DWORD 1
+ UINT32 EraseSizes : 2;
+ UINT32 WriteGranularity : 1;
+ UINT32 VolatileStatusBlockProtect : 1;
+ UINT32 WriteEnableVolatileStatus : 1;
+ UINT32 Unused1Dw1 : 3;
+ UINT32 FourKEraseInstr : 8;
+ UINT32 FastRead112 : 1;
+ UINT32 AddressBytes : 2;
+ UINT32 DtrClocking : 1;
+ UINT32 FastRead122 : 1;
+ UINT32 FastRead144 : 1;
+ UINT32 FastRead114 : 1;
+ UINT32 Unused2Dw1 : 9;
+ // DWORD 2
+ UINT32 Density;
+ // DWORD 3
+ // Fast Read 144
+ UINT32 FastRead144Dummy : 5;
+ UINT32 FastRead144ModeClk : 3;
+ UINT32 FastRead144Instr : 8;
+ // Fast Read 114
+ UINT32 FastRead114Dummy : 5;
+ UINT32 FastRead114ModeClk : 3;
+ UINT32 FastRead114Instr : 8;
+ // DWORD 4
+ // Fast Read 112
+ UINT32 FastRead112Dummy : 5;
+ UINT32 FastRead112ModeClk : 3;
+ UINT32 FastRead112Instr : 8;
+ // Fast Read 122
+ UINT32 FastRead122Dummy : 5;
+ UINT32 FastRead122ModeClk : 3;
+ UINT32 FastRead122Instr : 8;
+ // DWORD 5
+ UINT32 FastRead222 : 1;
+ UINT32 Unused1Dw5 : 3;
+ UINT32 FastRead444 : 1;
+ UINT32 Unused2Dw5 : 27;
+ // DWORD 6
+ UINT32 UnusedDw6 : 16;
+ // Fast Read 222
+ UINT32 FastRead222Dummy : 5;
+ UINT32 FastRead222ModeClk : 3;
+ UINT32 FastRead222Instr : 8;
+ // DWORD 7
+ UINT32 UnusedDw7 : 16;
+ // Fast Read 444
+ UINT32 FastRead444Dummy : 5;
+ UINT32 FastRead444ModeClk : 3;
+ UINT32 FastRead444Instr : 8;
+ // DWORD 8
+ UINT32 Erase1Size : 8;
+ UINT32 Erase1Instr : 8;
+ UINT32 Erase2Size : 8;
+ UINT32 Erase2Instr : 8;
+ // DWORD 9
+ UINT32 Erase3Size : 8;
+ UINT32 Erase3Instr : 8;
+ UINT32 Erase4Size : 8;
+ UINT32 Erase4Instr : 8;
+ // DWORD 10
+ UINT32 EraseMultiplier : 4;
+ UINT32 Erase1Time : 7;
+ UINT32 Erase2Time : 7;
+ UINT32 Erase3Time : 7;
+ UINT32 Erase4Time : 7;
+ // DWORD 11
+ UINT32 ProgramMultiplier : 4;
+ UINT32 PageSize : 4;
+ UINT32 PPTime : 6;
+ UINT32 BPFirstTime : 5;
+ UINT32 BPAdditionalTime : 5;
+ UINT32 ChipEraseTime : 7;
+ UINT32 Unused1Dw11 : 1;
+ // DWORD 12
+ UINT32 ProgSuspendProhibit : 4;
+ UINT32 EraseSuspendProhibit : 4;
+ UINT32 Unused1Dw13 : 1;
+ UINT32 ProgResumeToSuspend : 4;
+ UINT32 ProgSuspendInProgressTime : 7;
+ UINT32 EraseResumeToSuspend : 4;
+ UINT32 EraseSuspendInProgressTime : 7;
+ UINT32 SuspendResumeSupported : 1;
+ // DWORD 13
+ UINT32 Unused13;
+ // DWORD 14
+ UINT32 Unused14;
+ // DWORD 15
+ UINT32 Unused15;
+ // DWORD 16
+ UINT32 Unused16;
+ // DWORD 17
+ UINT32 FastRead188Dummy : 5;
+ UINT32 FastRead188ModeClk : 3;
+ UINT32 FastRead188Instr : 8;
+ UINT32 FastRead118Dummy : 5;
+ UINT32 FastRead118ModeClk : 3;
+ UINT32 FastRead118Instr : 8;
+ //
+ // Don't care about remaining DWORDs
+ // DWORD 18 to DWORD 23
+ //
+ UINT32 Unused18;
+ UINT32 Unused19;
+ UINT32 Unused20;
+ UINT32 Unused21;
+ UINT32 Unused22;
+ UINT32 Unused23;
+} SFDP_BASIC_FLASH_PARAMETER;
+#pragma pack ()
+
+#define SPI_UNIFORM_4K_ERASE_SUPPORTED 0x01
+#define SPI_UNIFORM_4K_ERASE_UNSUPPORTED 0x03
+
+///
+/// Number of address bytes opcode can support
+///
+#define SPI_ADDR_3BYTE_ONLY 0x00
+#define SPI_ADDR_3OR4BYTE 0x01
+#define SPI_ADDR_4BYTE_ONLY 0x02
+
+#define SFDP_ERASE_TYPES_NUMBER 4
+#define SFDP_ERASE_TYPE_1 0x0001
+#define SFDP_ERASE_TYPE_2 0x0002
+#define SFDP_ERASE_TYPE_3 0x0003
+#define SFDP_ERASE_TYPE_4 0x0004
+
+///
+/// Read/Write Array Commands
+///
+#define SPI_FLASH_READ 0x03
+#define SPI_FLASH_READ_DUMMY 0x00
+#define SPI_FLASH_READ_ADDR_BYTES SPI_ADDR_3OR4BYTE
+#define SPI_FLASH_FAST_READ 0x0B
+#define SPI_FLASH_FAST_READ_DUMMY 0x01
+#define SPI_FLASH_FAST_READ_ADDR_BYTES SPI_ADDR_3OR4BYTE
+#define SPI_FLASH_PP 0x02
+#define SPI_FLASH_PP_DUMMY 0x00
+#define SPI_FLASH_PP_ADDR_BYTES SPI_ADDR_3OR4BYTE
+#define SPI_FLASH_PAGE_SIZE 256
+#define SPI_FLASH_SE 0x20
+#define SPI_FLASH_SE_DUMMY 0x00
+#define SPI_FLASH_SE_ADDR_BYTES SPI_ADDR_3OR4BYTE
+#define SPI_FLASH_BE32K 0x52
+#define SPI_FLASH_BE32K_DUMMY 0x00
+#define SPI_FLASH_BE32K_ADDR_BYTES SPI_ADDR_3OR4BYTE
+#define SPI_FLASH_BE 0xD8
+#define SPI_FLASH_BE_DUMMY 0x00
+#define SPI_FLASH_BE_ADDR_BYTES SPI_ADDR_3OR4BYTE
+#define SPI_FLASH_CE 0x60
+#define SPI_FLASH_CE_DUMMY 0x00
+#define SPI_FLASH_CE_ADDR_BYTES SPI_ADDR_3OR4BYTE
+#define SPI_FLASH_RDID 0x9F
+#define SPI_FLASH_RDID_DUMMY 0x00
+#define SPI_FLASH_RDID_ADDR_BYTES SPI_ADDR_3OR4BYTE
+
+///
+/// Register Setting Commands
+///
+#define SPI_FLASH_WREN 0x06
+#define SPI_FLASH_WREN_DUMMY 0x00
+#define SPI_FLASH_WREN_ADDR_BYTES SPI_ADDR_3OR4BYTE
+#define SPI_FLASH_WRDI 0x04
+#define SPI_FLASH_WRDI_DUMMY 0x00
+#define SPI_FLASH_WRDI_ADDR_BYTES SPI_ADDR_3OR4BYTE
+#define SPI_FLASH_RDSR 0x05
+#define SPI_FLASH_RDSR_DUMMY 0x00
+#define SPI_FLASH_RDSR_ADDR_BYTES SPI_ADDR_3OR4BYTE
+#define SPI_FLASH_SR_NOT_WIP 0x0
+#define SPI_FLASH_SR_WIP BIT0
+#define SPI_FLASH_SR_WEL BIT1
+#define SPI_FLASH_WRSR 0x01
+#define SPI_FLASH_WRSR_DUMMY 0x00
+#define SPI_FLASH_WRSR_ADDR_BYTES SPI_ADDR_3OR4BYTE
+#define SPI_FLASH_WREN_50H 0x50
+#define SPI_FLASH_RDSFDP 0x5A
+#define SPI_FLASH_RDSFDP_DUMMY 0x01
+#define SPI_FLASH_RDSFDP_ADDR_BYTES SPI_ADDR_3BYTE_ONLY
+#define ERASE_TYPICAL_TIME_UNITS_MASK 0x60
+#define ERASE_TYPICAL_TIME_BIT_POSITION 5
+#define ERASE_TYPICAL_TIME_UNIT_1_MS_BITMAP 0x00
+#define ERASE_TYPICAL_TIME_UNIT_1_MS 1
+#define ERASE_TYPICAL_TIME_UNIT_16_MS_BITMAP 0x01
+#define ERASE_TYPICAL_TIME_UNIT_16_MS 16
+#define ERASE_TYPICAL_TIME_UNIT_128_MS_BITMAP 0x10
+#define ERASE_TYPICAL_TIME_UNIT_128_MS 128
+#define ERASE_TYPICAL_TIME_UNIT_1000_MS_BITMAP 0x11
+#define ERASE_TYPICAL_TIME_UNIT_1000_MS 1000
+#define ERASE_TYPICAL_TIME_COUNT_MASK 0x1f
+
+///
+/// Flash Device Configuration Detection Command descriptor.
+///
+typedef struct {
+ // DWORD 1
+ UINT32 DescriptorEnd : 1; ///< Descriptor Sequence End Indicator.
+ UINT32 DescriptorType : 1; ///< Descriptor Type.
+ UINT32 Reserve1 : 6; ///< Bit [7:2] is reserved.
+ UINT32 DetectionInstruction : 8; ///< Sector map configuration detection command.
+ UINT32 DetectionLatency : 4; ///< Configuration detection command read latency.
+ UINT32 Reserve2 : 2; ///< Bit [21:20] is reserved.
+ UINT32 DetectionCommandAddressLen : 2; ///< Configuration detection command address length.
+ UINT32 ReadDataMask : 8; ///< Bit mask of the interst bit of the returned
+ ///< byte read from the detection command.
+ // DWORD 2
+ UINT32 CommandAddress : 32; ///< Sector map configuration detection command address.
+} SFDP_SECTOR_CONFIGURATION_COMMAND;
+
+#define SFDP_SECTOR_MAP_TABLE_ENTRY_TYPE_COMMAND 0
+#define SFDP_SECTOR_MAP_TABLE_ENTRY_TYPE_MAP 1
+#define SFDP_SECTOR_MAP_TABLE_ENTRY_LAST 1
+
+///
+/// Definition of Configuration detection command address length.
+///
+typedef enum {
+ SpdfConfigurationCommandAddressNone = 0,
+ SpdfConfigurationCommandAddress3Byte = 1,
+ SpdfConfigurationCommandAddress4Byte = 2,
+ SpdfConfigurationCommandAddressVariable = 3
+} SPDF_CONFIGURATION_COMMAND_ADDR_LENGTH;
+
+///
+/// Flash Device Configuration Map descriptor.
+///
+typedef struct {
+ // DWORD 1
+ UINT32 DescriptorEnd : 1; ///< Descriptor Sequence End Indicator.
+ UINT32 DescriptorType : 1; ///< Descriptor Type.
+ UINT32 Reserve1 : 6; ///< Bit [7:2] is reserved.
+ UINT32 ConfigurationID : 8; ///< ID of this configuration.
+ UINT32 RegionCount : 8; ///< The region count of this configuration.
+ UINT32 Reserve2 : 8; ///< [31:24] is reserved.
+} SFDP_SECTOR_CONFIGURATION_MAP;
+
+typedef struct {
+ UINT32 DescriptorEnd : 1; ///< Descriptor Sequence End Indicator.
+ UINT32 DescriptorType : 1; ///< Descriptor Type.
+} SFDP_SECTOR_CONFIGURATION_GENERIC_HEADER;
+
+///
+/// Flash Device Region Definition.
+///
+typedef struct _SFDP_SECTOR_REGION {
+ // DWORD 1
+ UINT32 EraseType1 : 1; ///< Earse type 1 is supported.
+ UINT32 EraseType2 : 1; ///< Earse type 2 is supported.
+ UINT32 EraseType3 : 1; ///< Earse type 3 is supported.
+ UINT32 EraseType4 : 1; ///< Earse type 4 is supported.
+ UINT32 Reserve1 : 4; ///< Bit [7:4] is reserved.
+ UINT32 RegionSize : 24; ///< Region size in 256 Byte unit.
+} SFDP_SECTOR_REGION;
+#define SFDP_SECTOR_REGION_SIZE_UNIT 256
+
+///
+/// Sector Map Table structure, the entry could be
+/// either Configuration Detection Command descriptor,
+/// or Configuration Map descriptor.
+///
+typedef union _SFDP_SECTOR_MAP_TABLE {
+ SFDP_SECTOR_CONFIGURATION_GENERIC_HEADER GenericHeader;
+ SFDP_SECTOR_CONFIGURATION_COMMAND ConfigurationCommand; ///< Fash configuration detection command.
+ SFDP_SECTOR_CONFIGURATION_MAP ConfigurationMap; ///< Flash map descriptor.
+} SFDP_SECTOR_MAP_TABLE;
+
+#endif // SPI_NOR_FLASH_JEDEC_H_
--
2.37.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#107420): https://edk2.groups.io/g/devel/message/107420
Mute This Topic: https://groups.io/mt/100478920/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2023-08-01 7:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-01 7:57 [edk2-devel] [PATCH V2 0/6] SPI NOR Flash Driver for SFDP flash device Chang, Abner via groups.io
2023-08-01 7:57 ` [edk2-devel] [PATCH V2 1/6] MdePkg/Include: Update definitions of SPI related header files Chang, Abner via groups.io
2023-08-02 5:41 ` [edk2-devel] 回复: " gaoliming via groups.io
2023-08-02 7:48 ` [edk2-devel] " Chang, Abner via groups.io
2023-08-03 11:04 ` 回复: " gaoliming via groups.io
2023-08-01 7:57 ` Chang, Abner via groups.io [this message]
2023-08-01 7:57 ` [edk2-devel] [PATCH V2 3/6] MdePkg: Add definitions in DEC for SPI NOR Flash SPDF driver Chang, Abner via groups.io
2023-08-02 8:06 ` [edk2-devel] 回复: " gaoliming via groups.io
2023-08-02 8:50 ` [edk2-devel] " Chang, Abner via groups.io
2023-08-01 7:57 ` [edk2-devel] [PATCH V2 4/6] MdeModulePkg/SpiNorFlashJedecSfdp: SPI NOR Flash JEDEC SFDP Chang, Abner via groups.io
2023-08-01 7:57 ` [edk2-devel] [PATCH V2 5/6] MdeModulePkg: Add SPI NOR FLash SFDP drivers to DSC Chang, Abner via groups.io
2023-08-01 7:57 ` [edk2-devel] [PATCH V2 6/6] Maintainers.txt: Update maintainer for SPI modules Chang, Abner via groups.io
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230801075725.1102-3-abner.chang@amd.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox