From: "Laszlo Ersek" <lersek@redhat.com>
To: devel@edk2.groups.io
Cc: Leif Lindholm <quic_llindhol@quicinc.com>,
Marcin Wojtas <mw@semihalf.com>
Subject: [edk2-devel] [edk2-platforms PATCH 5/7] Silicon/Marvell/RealTimeClockLib: remove superfluous instance init steps
Date: Fri, 20 Oct 2023 14:19:01 +0200 [thread overview]
Message-ID: <20231020121903.44986-6-lersek@redhat.com> (raw)
In-Reply-To: <20231020121903.44986-1-lersek@redhat.com>
RealTimeClockLib instances are consumed by edk2's
EmbeddedPkg/RealTimeClockRuntimeDxe driver. In its entry point function
InitializeRealTimeClock(), the driver:
(1) calls LibRtcInitialize(),
(2) sets the GetTime(), SetTime(), GetWakeupTime() and SetWakeupTime()
runtime services to its own similarly-named functions -- where those
functions wrap the corresponding RealTimeClockLib APIs,
(3) installs EFI_REAL_TIME_CLOCK_ARCH_PROTOCOL with a NULL protocol
interface.
Steps (2) and (3) conform to PI v1.8 sections II-9.7.2.4 through
II-9.7.2.7.
However, this means that LibRtcInitialize() (of any RealTimeClockLib
instance) should not itself (a) set the GetTime(), SetTime(),
GetWakeupTime() and SetWakeupTime() runtime services, nor (b) install
EFI_REAL_TIME_CLOCK_ARCH_PROTOCOL. The runtime service pointers will be
overwritten in step (2) anyway, and step (3) will uselessly install a
second (NULL-interface) EFI_REAL_TIME_CLOCK_ARCH_PROTOCOL instance in the
protocol database. (The protocol only serves to notify the DXE Foundation
about said runtime services being available.)
Clean up Silicon/Marvell/RealTimeClockLib accordingly (it only has code
that's redundant for step (3); it does not try to set "gRT" fields).
(Note that the lib instance INF file already does not list
gEfiRealTimeClockArchProtocolGuid.)
Build-tested only (with "Armada70x0Db.dsc").
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4565
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
context:-W
Silicon/Marvell/Armada7k8k/Library/RealTimeClockLib/RealTimeClockLib.c | 19 +------------------
1 file changed, 1 insertion(+), 18 deletions(-)
diff --git a/Silicon/Marvell/Armada7k8k/Library/RealTimeClockLib/RealTimeClockLib.c b/Silicon/Marvell/Armada7k8k/Library/RealTimeClockLib/RealTimeClockLib.c
index d538b030b111..c026ac2dee31 100644
--- a/Silicon/Marvell/Armada7k8k/Library/RealTimeClockLib/RealTimeClockLib.c
+++ b/Silicon/Marvell/Armada7k8k/Library/RealTimeClockLib/RealTimeClockLib.c
@@ -1,30 +1,29 @@
/** @file
Implement EFI RealTimeClock runtime services via RTC Lib.
Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
Copyright (c) 2011 - 2014, ARM Ltd. All rights reserved.<BR>
Copyright (c) 2017, Marvell International Ltd. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
/**
Derived from:
ArmPlatformPkg/Library/PL031RealTimeClockLib/PL031RealTimeClockLib.c
**/
#include <PiDxe.h>
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
#include <Library/DxeServicesTableLib.h>
#include <Library/TimeBaseLib.h>
#include <Library/IoLib.h>
#include <Library/RealTimeClockLib.h>
#include <Library/TimerLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiRuntimeLib.h>
-#include <Protocol/RealTimeClock.h>
#include "RealTimeClockLib.h"
STATIC EFI_EVENT mRtcVirtualAddrChangeEvent;
@@ -245,85 +244,69 @@ EFIAPI
LibRtcInitialize (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
- EFI_HANDLE Handle;
EFI_STATUS Status;
// Obtain RTC device base address
mArmadaRtcBase = PcdGet64 (PcdRtcBaseAddress);
// Check if the controller can be initialized
if (mArmadaRtcBase == 0) {
DEBUG ((DEBUG_ERROR, "RTC: None of controllers enabled\n"));
return EFI_INVALID_PARAMETER;
}
// Declare the controller as EFI_MEMORY_RUNTIME
Status = gDS->AddMemorySpace (
EfiGcdMemoryTypeMemoryMappedIo,
mArmadaRtcBase,
SIZE_4KB,
EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "RTC: Failed to add memory space\n"));
return Status;
}
Status = gDS->SetMemorySpaceAttributes (
mArmadaRtcBase,
SIZE_4KB,
EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "RTC: Failed to set memory attributes\n"));
goto ErrSetMem;
}
/* Update RTC-MBUS bridge timing parameters */
MmioAndThenOr32 (
mArmadaRtcBase + RTC_BRIDGE_TIMING_CTRL0_REG_OFFS,
~(RTC_WRITE_SETUP_DELAY_MASK | RTC_WRITE_PERIOD_DELAY_MASK),
(RTC_WRITE_SETUP_DELAY_DEFAULT | RTC_WRITE_PERIOD_DELAY_DEFAULT)
);
MmioAndThenOr32 (
mArmadaRtcBase + RTC_BRIDGE_TIMING_CTRL1_REG_OFFS,
~RTC_READ_OUTPUT_DELAY_MASK,
RTC_READ_OUTPUT_DELAY_DEFAULT
);
- // Install the protocol
- Handle = NULL;
- Status = gBS->InstallMultipleProtocolInterfaces (
- &Handle,
- &gEfiRealTimeClockArchProtocolGuid,
- NULL,
- NULL
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "RTC: Failed to install the protocol\n"));
- goto ErrSetMem;
- }
-
// Register for the virtual address change event
Status = gBS->CreateEventEx (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
VirtualNotifyEvent,
NULL,
&gEfiEventVirtualAddressChangeGuid,
&mRtcVirtualAddrChangeEvent
);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "RTC: Failed to register virtual address change event\n"));
- goto ErrEvent;
+ goto ErrSetMem;
}
return Status;
-ErrEvent:
- gBS->UninstallProtocolInterface (Handle, &gEfiRealTimeClockArchProtocolGuid, NULL);
ErrSetMem:
gDS->RemoveMemorySpace (mArmadaRtcBase, SIZE_4KB);
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#109839): https://edk2.groups.io/g/devel/message/109839
Mute This Topic: https://groups.io/mt/102079658/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2023-10-20 12:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-20 12:18 [edk2-devel] [edk2-platforms PATCH 0/7] drop needless init steps in RealTimeClockLib instances Laszlo Ersek
2023-10-20 12:18 ` [edk2-devel] [edk2-platforms PATCH 1/7] Hisilicon/DS3231RealTimeClockLib: remove superfluous instance init steps Laszlo Ersek
2023-10-20 12:18 ` [edk2-devel] [edk2-platforms PATCH 2/7] LoongArchQemuPkg/LsRealTimeClockLib: " Laszlo Ersek
2023-10-23 6:52 ` Chao Li
2023-10-20 12:18 ` [edk2-devel] [edk2-platforms PATCH 3/7] Hisilicon/M41T83RealTimeClockLib: " Laszlo Ersek
2023-10-20 12:19 ` [edk2-devel] [edk2-platforms PATCH 4/7] Hisilicon/RX8900RealTimeClockLib: " Laszlo Ersek
2023-10-20 12:19 ` Laszlo Ersek [this message]
2023-10-20 12:19 ` [edk2-devel] [edk2-platforms PATCH 6/7] FT2000-4Pkg/RealTimeClockLib: " Laszlo Ersek
2023-10-20 12:19 ` [edk2-devel] [edk2-platforms PATCH 7/7] Omap35xxPkg/RealTimeClockLib: " Laszlo Ersek
2023-10-20 12:26 ` [edk2-devel] [edk2-platforms PATCH 0/7] drop needless init steps in RealTimeClockLib instances Ard Biesheuvel
2023-10-24 13:20 ` Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231020121903.44986-6-lersek@redhat.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox